• [00:13:02] * aurelien_ is now known as aurelien
  • [00:13:15] * aurelien (~aurelien@AMarseille-157-1-80-186.w90-37.abo.wanadoo.fr) Quit (Changing host)
  • [00:13:16] * aurelien (~aurelien@fsf/member/aurelien) has joined #beagle
  • [00:13:24] * cap42 (~Adium@pak.twistedbit.com) Quit (Quit: Leaving.)
  • [00:16:14] * thurgood (~thurgood@cpe-70-113-204-247.austin.res.rr.com) has joined #beagle
  • [00:17:36] * zer0s (~hizuzu@c-98-198-88-222.hsd1.tx.comcast.net) has joined #beagle
  • [00:24:50] * kfoltman (~kfoltman@188.141.18.243) Quit (Quit: Ex-Chat)
  • [00:27:39] * louiz920 (~a0272879@nat/ti/x-tcjfjwlnarkmkvdj) has joined #beagle
  • [00:28:21] * cthree87 (~cthree87@CPE00222d6c15e0-CM00222d6c15dd.cpe.net.cable.rogers.com) Quit (Ping timeout: 248 seconds)
  • [00:31:34] * bbdummy (18ead909@gateway/web/freenode/ip.24.234.217.9) has joined #beagle
  • [00:33:09] <bbdummy> hi all, i need to add curl support to the php that ships with my BBB. is there an easy way to do this? recompiling on the bbb seems like it'll be slow. but the documentation for recompiling "opkg" binaries so i can just copy them over seems to be, missing ?
  • [00:36:15] * musufu (~musufu@toki.sometwo.net) has joined #beaglebone
  • [00:36:15] * musufu (~musufu@toki.sometwo.net) has joined #beagle
  • [00:36:22] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [00:40:08] * robertinant (~robertina@131.107.165.123) Quit (Ping timeout: 272 seconds)
  • [00:43:45] * pjustice (~pjustice@yagi.h-net.msu.edu) has joined #beagle
  • [00:45:15] * louiz920 (~a0272879@nat/ti/x-tcjfjwlnarkmkvdj) Quit (Ping timeout: 252 seconds)
  • [00:45:40] * louiz920 (~a0272879@nat/ti/x-uycbnghqfuhieame) has joined #beagle
  • [00:46:38] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Ping timeout: 252 seconds)
  • [00:48:25] * tabbek (~tabbek@c-24-17-246-10.hsd1.wa.comcast.net) has joined #beagle
  • [00:53:33] * prpplague (~prpplague@107-206-64-184.lightspeed.rcsntx.sbcglobal.net) has joined #beagle
  • [00:58:07] * mrpackethead (~mrpacketh@41.67.224.49.dyn.cust.vf.net.nz) has joined #beagle
  • [00:59:57] * djerome (~djerome@ip68-98-228-41.ph.ph.cox.net) has joined #beaglebone
  • [01:00:36] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) has joined #beagle
  • [01:01:13] * louiz920 (~a0272879@nat/ti/x-uycbnghqfuhieame) Quit (Quit: Leaving.)
  • [01:05:57] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) Quit (Quit: Leaving)
  • [01:06:20] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) has joined #beagle
  • [01:07:58] * mrpackethead (~mrpacketh@41.67.224.49.dyn.cust.vf.net.nz) Quit (Quit: Colloquy for iPhone - http://colloquy.mobi)
  • [01:08:05] * brownies (~brownies@unaffiliated/brownies) Quit (Ping timeout: 252 seconds)
  • [01:08:43] * brownies (~brownies@184.106.201.58) has joined #beagle
  • [01:08:45] * brownies (~brownies@184.106.201.58) Quit (Changing host)
  • [01:08:45] * brownies (~brownies@unaffiliated/brownies) has joined #beagle
  • [01:09:37] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) has joined #beagle
  • [01:10:13] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit (Client Quit)
  • [01:15:41] * leewr (568de569@gateway/web/freenode/ip.86.141.229.105) has joined #beagle
  • [01:20:13] <leewr> hello - can anyone point me in the direction of a good resource on how to compile a raspberry pi project on a BBB? I've followed some instructions to install sdk packages. Im using the makefile and getting gnu/stubs-hard.h: No such file or directory
  • [01:20:16] * zeroem (~dhamilton@nat-225.fw1.la.vclk.net) has left #beagle
  • [01:21:07] * bbdummy (18ead909@gateway/web/freenode/ip.24.234.217.9) Quit (Ping timeout: 272 seconds)
  • [01:21:17] <leewr> I cant figure out how to search the opkg repo for the packages containing these artifacts
  • [01:22:04] <leewr> Im using stock Angstrom
  • [01:23:20] <leewr> please?
  • [01:27:45] <leewr> can anyone see this message?
  • [01:28:46] * sellout- (~Adium@75-166-123-23.hlrn.qwest.net) has joined #beagle
  • [01:29:25] <leewr> can anyone see me !! ?
  • [01:29:26] * zer0s (~hizuzu@c-98-198-88-222.hsd1.tx.comcast.net) Quit (Quit: Leaving)
  • [01:29:35] <CareBear\> leewr : no
  • [01:29:40] <leewr> :)
  • [01:29:41] <prpplague> leewr: no
  • [01:30:38] <leewr> Ill try an rephrase, how do i find which opkg package contains the files I need to compile a C project?
  • [01:31:10] <thurgood> leewr: if you're building on the board did you installl task-native-sdk
  • [01:31:24] <CareBear\> leewr : make, gcc and binutils are in the default install of angstrom, aren't they?
  • [01:31:28] <leewr> thurgood - yes i did
  • [01:32:10] <leewr> gnu/stubs.h is
  • [01:32:16] <thurgood> perhaps you're missing a dev version of a library you're including then
  • [01:32:19] <leewr> stubs-hard.h isn there
  • [01:32:57] <leewr> how can i find out which package I need?
  • [01:33:13] <leewr> i think opkg search <name> only searches the installed packages
  • [01:33:19] <leewr> not a lookup online???
  • [01:33:29] <thurgood> is that a part of a non-standard library?
  • [01:33:45] * cosmo1t (znc@cosmo.2y.net) Quit (Read error: Connection reset by peer)
  • [01:33:46] <thurgood> I usually use opkg list |grep <something>
  • [01:33:48] <leewr> I don't know, v new to linux
  • [01:34:07] * cosmo1t (znc@cosmo.2y.net) has joined #beagle
  • [01:34:13] <thurgood> list shows all packages that are known in the repos
  • [01:34:16] <CareBear\> leewr : "a raspberry pi project" is an absolutely useless description
  • [01:34:21] <CareBear\> leewr : you really have to learn more
  • [01:34:29] * k4jcw_ (~jcw@66-168-197-164.dhcp.gsvl.ga.charter.com) has joined #beagle
  • [01:34:57] <thurgood> never hurts to ask CareBear\
  • [01:35:04] <leewr> I know i need to learn more thats why I asked for a resources... I h ave looked at online resources
  • [01:35:11] <leewr> came here to ask for advice later
  • [01:35:23] <CareBear\> leewr : you have to learn more about what you are doing, not about files and packages
  • [01:35:31] <leewr> opkg list | grep stubs-hard
  • [01:35:35] <CareBear\> leewr : find out what the actual dependencies of the code you want to build are
  • [01:35:36] <leewr> this shows nothing
  • [01:35:46] * poagester (4b9757b1@gateway/web/freenode/ip.75.151.87.177) has joined #beagle
  • [01:36:41] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) Quit (Ping timeout: 252 seconds)
  • [01:36:49] <leewr> okay it there any advice you can offer on finding out the dependanceis are? the project is on Git Hub,
  • [01:36:59] <leewr> but does not list libraries needed
  • [01:37:07] <leewr> as it was built for raspbian
  • [01:37:13] <poagester> can anyone give me a hand in connect to my beaglebone black? I just purchased it yesterday and can't seem to get any output from it.
  • [01:37:28] <thurgood> try google: gnu stubs arm
  • [01:37:53] <k4jcw_> I've built 3.13.0-rc8-bone4 to test, and I've got 3.8.13-bone32 installed. To upgrade the BBB, I know I need to unpack the modules.tgz file. There's a /boot/initrd.3.8.13-bone32 file, and a /boot/uboot/zImage file, along with /boot/uboot/uInitrd. Is the one in /boot actually referenced? or do I just need to replace the /boot/uboot/zImage file?
  • [01:38:43] <CareBear\> leewr : well read the documentation and if the authors haven't documented dependencies then you have to reverse engineer what the dependencies are using their source code
  • [01:39:27] <CareBear\> leewr : welcome to the linux ecosystem, where people have no clue about writing good generic and portable code and nobody writes documentation
  • [01:39:49] <CareBear\> it's fun
  • [01:40:00] <leewr> bah... for an hour or two... !
  • [01:40:07] <thurgood> can be fun if it's not late in the day :P
  • [01:40:28] <CareBear\> leewr : what's the github url?
  • [01:40:36] <leewr> ambi-tv
  • [01:40:40] <leewr> first google result
  • [01:40:46] <CareBear\> please give the url
  • [01:40:47] * trigpoint (~phil@054159aa.skybroadband.com) has left #beagle
  • [01:40:48] <CareBear\> I don't use google
  • [01:40:59] <CareBear\> you can do us that favor :)
  • [01:41:12] <leewr> https://github.com/gkaindl/ambi-tv
  • [01:41:16] <leewr> :)
  • [01:41:20] <k4jcw_> "I don't use google"?
  • [01:41:23] <CareBear\> let's see
  • [01:41:47] <leewr> I should have just bought a pi instead of making things difficult... but i wanted to learn :/
  • [01:42:20] <CareBear\> don't worry - you bought the correct hardware
  • [01:42:23] <CareBear\> the pi is really shit
  • [01:42:54] <leewr> :) I've played around with arduino - like the hardware side of things
  • [01:43:01] <thurgood> unless yow ant full hd... then you probably should have bought a pi :/
  • [01:43:30] <leewr> nope... no video output... this is an ambiance lighting project.. .based on a video capture input
  • [01:43:38] <thurgood> but if you like being able to play with hardware and find resources, bbb is the way to go
  • [01:43:54] <ds2> there is no reason to want the irrational thing
  • [01:44:15] <CareBear\> leewr : this project is not created in a way to work on just any ARM processor
  • [01:44:42] <leewr> okay, what would be the best way to tackle this?
  • [01:44:46] <leewr> another distro?
  • [01:45:11] <CareBear\> no not another distro
  • [01:45:18] <CareBear\> the distribution has nothing whatsoever to do with the hardware
  • [01:46:43] <leewr> okay.. im thinking along the lines of missing kernel files for this project... but they are dev/sdk files? and i would need to include them in the kernel of any distro
  • [01:46:51] <leewr> is that along the right lines?
  • [01:47:04] <CareBear\> fuck no
  • [01:47:06] <CareBear\> come on
  • [01:47:07] <leewr> haha
  • [01:47:11] <leewr> :(
  • [01:47:30] <leewr> give me a clue.. something to work on
  • [01:47:36] <CareBear\> what do you know about processor architecture?
  • [01:47:57] <ds2> "awesome things to admire"
  • [01:47:57] <CareBear\> research the history of ARM processors a bit
  • [01:48:00] <leewr> that there are different ones... come on im a newb thats why im here
  • [01:48:19] <CareBear\> find out what processor is on the pi and what is on the beaglebone
  • [01:48:57] <CareBear\> you don't have to learn every single detail, but do learn about ARM and what they've done
  • [01:50:44] <thurgood> CareBear\: I thought bbb is a hard float system?
  • [01:52:03] <CareBear\> thurgood : it is
  • [01:52:38] <leewr> im on the ARM wiki now
  • [01:53:28] <ds2> only if you put a block of lead on the BBB
  • [01:53:36] <ds2> otherwise, it is small and light enough to be a easy float system
  • [01:54:50] * eikeon (~eikeon@c-98-218-6-128.hsd1.dc.comcast.net) has joined #beagle
  • [01:55:38] * kingemer (~kingemer@69.169.157.253.provo.static.broadweavenetworks.net) has joined #beagle
  • [01:55:57] <poagester> can anyone give me a hand in connect to my beaglebone black? I just purchased it yesterday and can't seem to get any output from it.
  • [01:56:11] <jkridner> what do you mean by output?
  • [01:56:19] <jkridner> graphical display?
  • [01:56:41] <jkridner> have you tried plugging it in over USB to see that functionality?
  • [01:57:12] <poagester> from what i understand i just plug the usb in after running the udev script and go to 192.168.7.2,, but i don't have any new usb devs in /dev/ and never get to the ip
  • [01:58:58] <jkridner> k, so you are using a Linux host...
  • [01:59:03] <jkridner> what does your dmesg log show?
  • [01:59:05] <poagester> ubuntu
  • [01:59:45] <poagester> nothing for usb
  • [01:59:59] <jkridner> lights blinking on the board?
  • [02:00:08] <thurgood> what about lsusb?
  • [02:00:18] <poagester> yup like a heartbeat on the proc and io
  • [02:00:28] <CareBear\> poagester : run ip l sh and look for usb0 ?
  • [02:00:29] <poagester> just that hubs are there
  • [02:00:41] <leewr> CareBear\ I dont think im at the stage where I can understand the processor arcutecture jargon yet - I dont know what a float point is but i can see there are hardware and software emulated flavours. this missing file is related to this I assume ? stubs-hard.h
  • [02:01:09] <poagester> CareBear: nothin
  • [02:01:14] <poagester> for usb
  • [02:01:16] <CareBear\> poagester : bad
  • [02:01:23] * mnt_real (~sinan@unaffiliated/mnt-real/x-5039713) Quit (Quit: Ex-Chat)
  • [02:01:25] <poagester> is it bricked?
  • [02:01:29] <CareBear\> poagester : you did plug the USB cable to the beagle
  • [02:01:39] <poagester> CareBear: yup
  • [02:01:45] <thurgood> floating points are a way of representing decimals in binary
  • [02:02:16] <poagester> CareBear: tried bringing down wifi connecting a cross over and setting up my ip to access it doesn't work either
  • [02:02:20] <CareBear\> leewr : unless you want to learn more about that and about compiler technology I think the project at hand isn't really appropriate
  • [02:02:27] <leewr> thurgood okay thx
  • [02:02:51] * boris_G (~boris@CPE-124-176-80-12.lns3.ken.bigpond.net.au) Quit (Quit: This computer has gone to sleep)
  • [02:03:02] <poagester> CareBear: happens with win 7 too
  • [02:03:13] <CareBear\> poagester : if you connect an ethernet cable to the beaglebone then it will ask for a dhcp address on that cable
  • [02:03:54] <CareBear\> poagester : then you'll be able to reach it on that address
  • [02:04:02] <poagester> CareBear\: I thought that I read you didn't need to set up a dhcp server and it set up its own
  • [02:04:04] <CareBear\> poagester : why USB doesn't work I can't say
  • [02:04:12] <CareBear\> poagester : that's true only for USB
  • [02:04:30] <poagester> CareBear\: ah, is there someway to hard reset these?
  • [02:04:41] <CareBear\> poagester : so that people without networking knowledge will be able to plug the USB cable and immediately reach the board
  • [02:04:48] <CareBear\> poagester : reset what?
  • [02:04:53] <CareBear\> poagester : just try with the ethernet cable
  • [02:05:18] <leewr> CareBear\ so read up on compilers and ARM history - anything specific?
  • [02:05:22] * konradoo77 (~debian@81.6.139.17) Quit (Ping timeout: 272 seconds)
  • [02:05:23] * konradoo87 (~debian@81.6.139.17) has joined #beagle
  • [02:05:24] <poagester> CareBear\: like a hard reset to factory
  • [02:05:30] <poagester> prolly not
  • [02:06:00] <CareBear\> poagester : sure there is. you need a microsd card and simply to follow the instructions for doing so.
  • [02:06:39] <poagester> CareBear\: lemme try the dhcp server, be back in a bit
  • [02:07:46] <leewr> CareBear\: just a few teeny hints even? e.g. its to do with float point
  • [02:07:47] <CareBear\> leewr : you need to understand the compiler flags that the project uses when compiling the code and how they relate to the processor on the pi and what instead is appropriate for the processor on the beaglebone
  • [02:08:32] <CareBear\> leewr : everything you need to learn really has nothing to do with embedded linux or even linux, and at least to begin with (gcc) nothing to do with arm
  • [02:08:32] <leewr> CareBear\ : so the flags for float point for example, I can set to use hardware float point
  • [02:08:40] <thurgood> not to discourage you, but that project may be a little tough to port for a newer user
  • [02:08:45] <CareBear\> leewr : stop shooting blind
  • [02:09:04] <CareBear\> leewr : spend a few weeks learning
  • [02:09:16] <leewr> CareBear\ but thats all i can do if you send me away and say read stuff
  • [02:09:20] <CareBear\> leewr : e.g. using a linux system on some pc nearby
  • [02:09:30] <CareBear\> leewr : no, you can *actually read stuff*
  • [02:10:16] <CareBear\> leewr : if you've never worked with the gnu toolchain then you have a bit of a threshold to climb before you can adapt that pi project to suit the beagle
  • [02:10:23] <leewr> CareBear\ : its knowing what to read... guys in here might know a really good starting point for my specific problem
  • [02:10:31] <CareBear\> leewr : the two processors are very different. the beagle processor is significantly better.
  • [02:10:42] <leewr> CareBear\ : ohhh.. i was afraid of that.
  • [02:10:45] <CareBear\> leewr : you don't need to learn about your specific problem.
  • [02:10:52] <CareBear\> leewr : you need to learn very general things
  • [02:11:09] <CareBear\> leewr : once you have, your specific problem is just one out of a million problems that you will know how to solve
  • [02:11:18] <CareBear\> leewr : it's not really possible to only learn about your specific problem
  • [02:11:47] * poagester (4b9757b1@gateway/web/freenode/ip.75.151.87.177) Quit (Ping timeout: 272 seconds)
  • [02:11:55] <leewr> CareBear\: k.. im a .net DB developer by day.. windows dev all the way
  • [02:12:09] <CareBear\> for how long?
  • [02:12:20] <leewr> CareBear\: 5 years
  • [02:12:32] <CareBear\> not so much
  • [02:12:44] <thurgood> cross platform linux is a bit different of a beast
  • [02:13:06] <leewr> yea - i noticed :)
  • [02:13:14] <CareBear\> but if you've already gotten into toolchain details then the gnu toolchain is certainly learnable
  • [02:13:15] <leewr> im enjoying it tho
  • [02:13:18] <CareBear\> a toolchain is a toolchain
  • [02:14:11] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 260 seconds)
  • [02:16:09] <CareBear\> really - start with native linux on a pc
  • [02:16:24] <CareBear\> ideally follow the linux from scratch instructions
  • [02:16:55] <CareBear\> don't neccessarily need to do the massively time consuming things like graphical environments
  • [02:16:55] <leewr> you mean building a distro from scrach?
  • [02:17:09] <CareBear\> a linux system, yes
  • [02:17:35] <leewr> lthat sounds hard... any resources you can recommend?
  • [02:17:53] <CareBear\> you can google "linux from scratch"
  • [02:17:57] <CareBear\> it'll be the first hit
  • [02:18:01] <CareBear\> I'm pretty sure
  • [02:18:05] <leewr> i dont use google ;)
  • [02:18:07] <ds2> building a distro is trivial
  • [02:18:27] <ds2> but some people's idea of a distro is more full featured then others
  • [02:18:33] * Humpelstilzchen (erik@e177142251.adsl.alicedsl.de) has joined #beagle
  • [02:19:44] <leewr> I take it I wouldnt be able to build something minimal myself and use in on BBB? how would it know how to use the IO pins?
  • [02:19:51] <CareBear\> leewr : very good. http://www.linuxfromscratch.org/
  • [02:19:57] <CareBear\> leewr : of course you would
  • [02:20:04] * jcw_ (~jcw@66-168-197-164.dhcp.gsvl.ga.charter.com) has joined #beagle
  • [02:20:50] * Humpelst1lzchen (erik@e179197116.adsl.alicedsl.de) Quit (Ping timeout: 272 seconds)
  • [02:21:57] * stahl (~stahl@178-83-160-218.dynamic.hispeed.ch) Quit (Ping timeout: 248 seconds)
  • [02:22:20] <leewr> any1 have a pi they dont want ??
  • [02:22:22] <leewr> :)
  • [02:22:27] <thurgood> lol
  • [02:22:37] * ds2 tosses 3.141592.... to leewr
  • [02:22:48] <leewr> ahh a float ponit?
  • [02:22:58] * prpplague throws a cowpi at leewr
  • [02:23:08] <leewr> :(
  • [02:23:09] * k4jcw_ (~jcw@66-168-197-164.dhcp.gsvl.ga.charter.com) Quit (Ping timeout: 252 seconds)
  • [02:23:16] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [02:23:17] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [02:23:20] <leewr> Thanks all - im off to do some light reading brefore bed
  • [02:23:30] <leewr> bloody hell 2.30 am
  • [02:23:52] <leewr> CareBear\ : thx
  • [02:23:58] <CareBear\> leewr : you're welcome
  • [02:24:04] <CareBear\> leewr : I do hope you persevere
  • [02:24:16] <leewr> ill cu in a week or 10
  • [02:24:31] <CareBear\> leewr : there are lots of projects made for the beaglebone
  • [02:24:45] <CareBear\> leewr : to satisfy your instant gratification need you can copypaste one of those
  • [02:24:51] <CareBear\> leewr : start with blinking leds
  • [02:24:53] <CareBear\> that's always fun
  • [02:24:59] <leewr> haha...
  • [02:25:17] <leewr> I've used node.js to blink some leds.. im good with that
  • [02:25:27] <leewr> bonescript.. .i should say
  • [02:25:40] <ds2> ewwwwwwwwwww
  • [02:26:02] <ds2> someone should put a webos image for the BBB
  • [02:26:46] <thurgood> we're upgrading our boards at work.... almost have the kernel fully working on the new design :)
  • [02:27:41] <thurgood> long way from staring with a blinking gpio led :P
  • [02:27:56] <ds2> if you want to blink a LED, use a 555
  • [02:28:06] * cosmo1t (znc@cosmo.2y.net) Quit (Read error: Connection reset by peer)
  • [02:28:11] <leewr> thats no fun
  • [02:29:11] <ds2> fine.. use a 556 ;)
  • [02:29:21] * SoCo_cpp (~soco@gateway/tor-sasl/sococpp/x-48425895) has joined #beagle
  • [02:30:33] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [02:30:59] * divine (~divine@69.198.165.132) Quit (Ping timeout: 260 seconds)
  • [02:32:01] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [02:32:01] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [02:32:30] * zer0s (~hizuzu@c-98-198-88-222.hsd1.tx.comcast.net) has joined #beagle
  • [02:33:06] * cosmo1t (znc@cosmo.2y.net) has joined #beagle
  • [02:38:35] * kingemer2 (~kingemer@69.169.157.253.provo.static.broadweavenetworks.net) has joined #beagle
  • [02:39:51] * kingemer (~kingemer@69.169.157.253.provo.static.broadweavenetworks.net) Quit (Ping timeout: 260 seconds)
  • [02:43:27] * leewr (568de569@gateway/web/freenode/ip.86.141.229.105) Quit (Ping timeout: 272 seconds)
  • [02:43:53] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [02:45:16] * cosmo1t (znc@cosmo.2y.net) Quit (Read error: Connection reset by peer)
  • [02:50:29] * cosmo1t (znc@cosmo.2y.net) has joined #beagle
  • [02:51:57] * tabbek (~tabbek@c-24-17-246-10.hsd1.wa.comcast.net) Quit (Quit: Leaving.)
  • [02:54:23] * Shadyman (~matthew@unaffiliated/shadyman) has joined #beagle
  • [03:03:14] * bitnumus (~bitnumus@unaffiliated/bitnumus) Quit (Ping timeout: 264 seconds)
  • [03:03:28] * dgerlach (~dave@nat/ti/x-ghaegkpwmoqovlri) has joined #beagle
  • [03:06:57] * jcw__ (~k4jcw@adsl-74-190-67-52.asm.bellsouth.net) has joined #beagle
  • [03:09:15] * k4jcw (~k4jcw@adsl-98-66-209-244.asm.bellsouth.net) Quit (Ping timeout: 260 seconds)
  • [03:10:24] * bitnumus (~bitnumus@unaffiliated/bitnumus) has joined #beagle
  • [03:10:44] * monoxide_13 (~monoxide_@97-92-67-54.dhcp.stcd.mn.charter.com) has joined #beagle
  • [03:11:51] * dgerlach (~dave@nat/ti/x-ghaegkpwmoqovlri) Quit (Quit: Leaving.)
  • [03:14:24] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Read error: Connection reset by peer)
  • [03:15:43] * kuldeepdhaka (~kuldeepdh@unaffiliated/kuldeepdhaka) has joined #beagle
  • [03:17:39] * djerome (~djerome@ip68-98-228-41.ph.ph.cox.net) Quit (Remote host closed the connection)
  • [03:27:06] * divine (~divine@nat/yahoo/x-khzcbnizndepgany) has joined #beaglebone
  • [03:33:23] * eikeon (~eikeon@c-98-218-6-128.hsd1.dc.comcast.net) Quit (Quit: eikeon)
  • [03:37:23] * eikeon (~eikeon@c-98-218-6-128.hsd1.dc.comcast.net) has joined #beagle
  • [03:38:28] * eikeon (~eikeon@c-98-218-6-128.hsd1.dc.comcast.net) Quit (Client Quit)
  • [03:41:35] * bizarro_1 (~bizarro_1@173.Red-83-49-225.dynamicIP.rima-tde.net) Quit (Quit: Leaving)
  • [03:46:40] * Prasanna (323bc60c@gateway/web/freenode/ip.50.59.198.12) has joined #beagle
  • [03:47:42] <Prasanna> hi..I have a question..can someone tell me how does the processor communicate with the ethernet chip on beaglebone black?
  • [03:52:49] <prpplague> Prasanna: the AM335x has two on board MAC s
  • [03:52:59] <prpplague> Prasanna: one of which is connected to a 10/100 ethernet phy
  • [03:54:07] * divine (~divine@nat/yahoo/x-khzcbnizndepgany) Quit (Quit: Lost terminal)
  • [03:54:31] <Prasanna> @prpplague...thank you
  • [03:55:35] <Prasanna> if i have an another ethernet chip in the board...can i connect the other MAC to the new ethernet chip?? wil it work??
  • [03:56:37] <prpplague> Prasanna: the second MAC does not have all of the signals available on the expansion header
  • [03:56:45] <prpplague> Prasanna: so no, you can;t use the second mac
  • [03:56:52] <prpplague> Prasanna: however you can use other means
  • [03:56:59] <prpplague> Prasanna: such as via usb, or via spi
  • [04:00:25] <Prasanna> how can i communicate with processor and ethernet chip via spi?
  • [04:01:08] <Prasanna> and suppose i have laid out two ethernet chip on my beagle board...how can i communicate with each of them?
  • [04:02:21] <prpplague> Prasanna: once the drivers are setup each ethernet interface will show up as an individual interface for networking
  • [04:02:43] <prpplague> Prasanna: http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en022889
  • [04:02:53] <prpplague> Prasanna: the enc28j60 is fully support in the linux kernel
  • [04:08:48] * anujdeshpande (~Thunderbi@117.195.45.92) has joined #beagle
  • [04:10:15] * Prasanna (323bc60c@gateway/web/freenode/ip.50.59.198.12) Quit (Quit: Page closed)
  • [04:10:45] * newbie (323bc60c@gateway/web/freenode/ip.50.59.198.12) has joined #beagle
  • [04:11:06] * n0n0 (~n0n0___@75.144.20.73) has joined #beagle
  • [04:11:08] * newbie is now known as Guest1501
  • [04:12:06] <Guest1501> hi...can someone tell me where i can find the source code for the arm processor for beaglebone black?
  • [04:12:32] <prpplague> Guest1501: which source code do you want
  • [04:13:18] <Guest1501> the basic architecture..like how does it communicate with other components in the board
  • [04:14:43] <prpplague> Guest1501: well....
  • [04:15:06] * vicash (~vicash@208.123.162.2) has joined #beagle
  • [04:15:06] <prpplague> Guest1501: maybe start with the linux kernel?
  • [04:15:53] <vicash> hi, i am running angstrom-v2012.12 on the BBB and cannot find the bash interpreter shell. how do I run a bash script without changing it fully. the only shell i see is /bin/sh that points to busybox
  • [04:16:12] <Guest1501> will i be able to view the source code for the components in linux?
  • [04:17:43] <prpplague> yes
  • [04:17:52] <vicash> nevermind, i installed the bash opkg and got it !
  • [04:17:54] * vicash (~vicash@208.123.162.2) has left #beagle
  • [04:19:06] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 265 seconds)
  • [04:21:59] * Guest1501 (323bc60c@gateway/web/freenode/ip.50.59.198.12) Quit (Quit: Page closed)
  • [04:24:44] * emeb (~ericb@ip68-104-219-168.ph.ph.cox.net) Quit (Quit: Leaving.)
  • [04:27:21] * Veedubin_ (~Veedubin@c-75-73-81-80.hsd1.mn.comcast.net) Quit (Remote host closed the connection)
  • [04:31:49] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [04:31:49] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [04:34:05] * anujdeshpande (~Thunderbi@117.195.45.92) Quit (Ping timeout: 265 seconds)
  • [04:37:19] * Veedubin (~Veedubin@c-75-73-81-80.hsd1.mn.comcast.net) has joined #beagle
  • [04:37:20] * Veedubin (~Veedubin@c-75-73-81-80.hsd1.mn.comcast.net) Quit (Changing host)
  • [04:37:20] * Veedubin (~Veedubin@unaffiliated/veedubin) has joined #beagle
  • [04:38:06] * anujdeshpande (~Thunderbi@117.195.45.92) has joined #beagle
  • [04:38:53] * Martel (475ad6ce@gateway/web/freenode/ip.71.90.214.206) has joined #beagle
  • [04:39:02] <Martel> Hello?
  • [04:39:06] <Martel> Anybody Home?
  • [04:40:51] <prpplague> no
  • [04:40:59] <prpplague> we left about an hour ago
  • [04:41:36] <prpplague> please don't eat our porridge
  • [04:41:45] * n0n0 (~n0n0___@75.144.20.73) Quit (Ping timeout: 252 seconds)
  • [04:43:15] * boris_G (~boris@CPE-124-176-80-12.lns3.ken.bigpond.net.au) has joined #beagle
  • [04:43:47] * Martel (475ad6ce@gateway/web/freenode/ip.71.90.214.206) Quit (Ping timeout: 272 seconds)
  • [04:44:43] * anujdeshpande (~Thunderbi@117.195.45.92) Quit (Ping timeout: 265 seconds)
  • [04:45:12] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 265 seconds)
  • [04:46:08] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [04:46:08] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [04:48:46] * Demonhawkxx (4a68b414@gateway/web/freenode/ip.74.104.180.20) Quit (Quit: Page closed)
  • [04:50:11] * Peuc (~Peuc@ip-96-43-229-243.dsl.netrevolution.com) Quit (Quit: Konversation terminated!)
  • [04:50:15] * sellout-1 (~Adium@75-166-123-23.hlrn.qwest.net) has joined #beagle
  • [04:51:06] * sellout- (~Adium@75-166-123-23.hlrn.qwest.net) Quit (Read error: Connection reset by peer)
  • [04:53:03] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [04:54:42] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [04:54:42] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [04:57:24] * zer0s (~hizuzu@c-98-198-88-222.hsd1.tx.comcast.net) Quit (Quit: Leaving)
  • [04:59:20] * tabbek (~tabbek@c-24-17-246-10.hsd1.wa.comcast.net) has joined #beagle
  • [05:00:52] * kiwichris (~textual@CPE-58-172-129-85.nfcz1.ken.bigpond.net.au) Quit (Quit: My MacBook Pro has gone to sleep. ZZZzzz???)
  • [05:01:09] * magi (~magi@h77-53-164-236.dynamic.se.alltele.net) has joined #beagle
  • [05:02:36] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 265 seconds)
  • [05:03:02] * Fusty (~Fusty@2607:5300:60:b49::1) Quit (Ping timeout: 240 seconds)
  • [05:03:20] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [05:03:20] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [05:04:28] * Fustyz (~Fusty@2607:5300:60:b49::1) has joined #beagle
  • [05:04:35] * bematt (~magi@h77-53-164-236.dynamic.se.alltele.net) Quit (Ping timeout: 245 seconds)
  • [05:04:46] * Fustyz is now known as Fusty
  • [05:06:59] * ponurak (~ponurak@gateway/tor-sasl/ponurak) Quit (Remote host closed the connection)
  • [05:07:36] * alan_o (~alan@c-76-29-154-88.hsd1.fl.comcast.net) Quit (Quit: Leaving)
  • [05:08:29] * n0n0 (~n0n0___@75.144.20.73) has joined #beagle
  • [05:09:42] * anujdeshpande (~Thunderbi@117.195.45.92) has joined #beagle
  • [05:15:04] * rotorgeek (~quassel@174-16-50-15.hlrn.qwest.net) Quit (Remote host closed the connection)
  • [05:15:08] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [05:18:04] * jbdatko (~jbdatko@fsf/member/jbdatko) Quit (Ping timeout: 246 seconds)
  • [05:25:44] * bkearns (~bkearns@75-101-54-23.dsl.static.sonic.net) has joined #beagle
  • [05:28:00] * yemartin (~yemartin@m002253.ppp.asahi-net.or.jp) has joined #beagle
  • [05:28:14] * newbie101 (323bc60c@gateway/web/freenode/ip.50.59.198.12) has joined #beagle
  • [05:28:25] * bkearns (~bkearns@75-101-54-23.dsl.static.sonic.net) Quit (Client Quit)
  • [05:28:52] * newbie101 (323bc60c@gateway/web/freenode/ip.50.59.198.12) Quit (Client Quit)
  • [05:30:20] * tema (~tema@178-16-155-142.obit.ru) Quit (Ping timeout: 246 seconds)
  • [05:34:57] * newbie101 (323bc60c@gateway/web/freenode/ip.50.59.198.12) has joined #beagle
  • [05:37:27] <newbie101> hi..i am wondering if we can add another ethernet chip to beaglebone black. If it is possible, how can i communicate with each ethernet chip? How would each of them communicate with the processor?
  • [05:39:06] * bkearns (~bkearns@75-101-54-23.dsl.static.sonic.net) has joined #beagle
  • [05:40:34] * sellout-1 is now known as sellout
  • [05:41:58] <musufu> newbie101: http://ww1.microchip.com/downloads/en/DeviceDoc/39662a.pdf don't expect too much performance though
  • [05:43:15] <musufu> wait a min :D
  • [05:43:20] <musufu> just get a usb one
  • [05:43:26] <musufu> and expect performance afterwards :D
  • [05:44:52] * Calc_ (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [05:48:02] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Ping timeout: 252 seconds)
  • [05:48:14] * newbie101 (323bc60c@gateway/web/freenode/ip.50.59.198.12) Quit (Quit: Page closed)
  • [05:55:52] * boris_G (~boris@CPE-124-176-80-12.lns3.ken.bigpond.net.au) Quit (Quit: This computer has gone to sleep)
  • [05:57:27] * sellout (~Adium@75-166-123-23.hlrn.qwest.net) Quit (Quit: Leaving.)
  • [05:57:53] * sellout- (~Adium@75-166-123-23.hlrn.qwest.net) has joined #beagle
  • [06:08:10] * bbdummy (446cb018@gateway/web/freenode/ip.68.108.176.24) has joined #beagle
  • [06:28:13] * bkearns (~bkearns@75-101-54-23.dsl.static.sonic.net) Quit (Quit: Leaving.)
  • [06:29:07] * Calc_ (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Ping timeout: 265 seconds)
  • [06:30:13] * kbart (~KBart@213.197.143.19) has joined #beagle
  • [06:30:49] * bbdummy (446cb018@gateway/web/freenode/ip.68.108.176.24) Quit (Ping timeout: 272 seconds)
  • [06:33:07] * boris_G (~boris@CPE-124-176-80-12.lns3.ken.bigpond.net.au) has joined #beagle
  • [06:33:12] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [06:35:10] * Daniele (~daniele@unaffiliated/daniele) Quit (Ping timeout: 272 seconds)
  • [06:36:08] * Daniele (~daniele@unaffiliated/daniele) has joined #beagle
  • [06:38:44] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [06:38:44] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [06:46:29] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 248 seconds)
  • [06:47:20] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [06:47:20] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [06:55:09] * n0n0 (~n0n0___@75.144.20.73) Quit (Remote host closed the connection)
  • [06:56:11] * n0n0 (~n0n0___@75.144.20.73) has joined #beagle
  • [06:56:35] * mrpackethead (~mrpacketh@99.242.224.49.dyn.cust.vf.net.nz) has joined #beagle
  • [06:58:10] * mrpackethead is now known as quaing_fu_kiwi
  • [06:58:31] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 246 seconds)
  • [07:00:06] * jpirko (~jirka@ip-94-113-120-213.net.upcbroadband.cz) has joined #beagle
  • [07:00:32] * darknighte (~darknight@pdpc/supporter/professional/darknighte) Quit (Ping timeout: 265 seconds)
  • [07:01:02] * darknighte (~darknight@pdpc/supporter/professional/darknighte) has joined #beagle
  • [07:01:49] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [07:01:49] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [07:02:28] * behanw (~behanw@184.66.11.74) Quit (Ping timeout: 265 seconds)
  • [07:05:53] * zeroem (~dhamilton@76.89.160.217) has joined #beagle
  • [07:07:46] * musufu (~musufu@toki.sometwo.net) Quit (Remote host closed the connection)
  • [07:08:27] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) Quit (Ping timeout: 272 seconds)
  • [07:08:30] * divine (~divine@71-80-232-57.dhcp.mghl.ca.charter.com) has joined #beaglebone
  • [07:10:00] * zeroem (~dhamilton@76.89.160.217) Quit (Ping timeout: 245 seconds)
  • [07:12:57] * q0 (~q@CPE-58-174-77-12.aecz2.woo.bigpond.net.au) has joined #beagle
  • [07:13:01] * q0 (~q@CPE-58-174-77-12.aecz2.woo.bigpond.net.au) Quit (Read error: Connection reset by peer)
  • [07:13:10] * thews_ (~thews@67-61-170-99.cpe.cableone.net) Quit (Ping timeout: 272 seconds)
  • [07:13:42] * q0 (~q@CPE-58-174-77-12.aecz2.woo.bigpond.net.au) has joined #beagle
  • [07:14:35] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [07:15:50] * quaing_fu_kiwi (~mrpacketh@99.242.224.49.dyn.cust.vf.net.nz) Quit (Ping timeout: 245 seconds)
  • [07:16:11] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [07:16:11] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [07:18:39] * mrpackethead (~mrpacketh@99.242.224.49.dyn.cust.vf.net.nz) has joined #beagle
  • [07:20:26] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) has joined #beagle
  • [07:21:05] * colonelK (~Thunderbi@84.93.15.207) has joined #beagle
  • [07:21:48] * kuldeepdhaka (~kuldeepdh@unaffiliated/kuldeepdhaka) Quit (Ping timeout: 245 seconds)
  • [07:22:47] * mrpackethead (~mrpacketh@99.242.224.49.dyn.cust.vf.net.nz) Quit (Client Quit)
  • [07:24:13] * juicyjones (~juicyjone@c-50-135-106-58.hsd1.wa.comcast.net) Quit (Ping timeout: 265 seconds)
  • [07:24:30] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) Quit (Client Quit)
  • [07:25:10] * zeroem (~dhamilton@64.156.167.128) has joined #beagle
  • [07:25:16] * NulL` (~bleh1@92.39.201.91) has joined #beagle
  • [07:25:33] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) has joined #beagle
  • [07:26:32] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 246 seconds)
  • [07:28:59] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [07:28:59] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [07:29:09] * colonelK (~Thunderbi@84.93.15.207) Quit (Quit: colonelK)
  • [07:30:32] * juicyjones (~juicyjone@c-50-135-106-58.hsd1.wa.comcast.net) has joined #beagle
  • [07:31:40] * trogdor (45fbe212@gateway/web/freenode/ip.69.251.226.18) has joined #beagle
  • [07:31:42] * bearsh|work (~quassel@189-92.77-83.cust.bluewin.ch) has joined #beagle
  • [07:32:03] * trogdor is now known as Guest94623
  • [07:33:36] * lyakh (~lyakh@dslb-094-221-127-243.pools.arcor-ip.net) has joined #beagle
  • [07:38:03] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [07:39:12] * mrpackethead (~mrpacketh@9.208.224.49.dyn.cust.vf.net.nz) has joined #beagle
  • [07:39:32] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [07:39:32] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [07:46:51] * mrpackethead (~mrpacketh@9.208.224.49.dyn.cust.vf.net.nz) Quit (Quit: Colloquy for iPhone - http://colloquy.mobi)
  • [07:47:05] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [07:49:40] * ssvb (~ssvb@212.16.98.80) Quit (Quit: Leaving)
  • [07:49:45] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [07:49:45] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [07:57:25] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 248 seconds)
  • [07:58:25] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [07:58:26] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [07:58:48] * thews (~thews@67-61-170-99.cpe.cableone.net) has joined #beagle
  • [08:01:17] * rob_w (~bob@unaffiliated/rob-w/x-1112029) has joined #beagle
  • [08:06:48] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [08:08:23] * n0n0 (~n0n0___@75.144.20.73) Quit (Ping timeout: 260 seconds)
  • [08:08:27] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [08:08:27] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [08:09:52] * sh1v (~sh1v@confluxhost.com) has left #beagle
  • [08:13:31] * torez (~torez@cpe-72-182-120-127.austin.res.rr.com) has joined #beagle
  • [08:13:36] * torez (~torez@cpe-72-182-120-127.austin.res.rr.com) has left #beagle
  • [08:13:46] * woglinde (~henning@fb-n15-11.unbelievable-machine.net) has joined #beagle
  • [08:16:37] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 248 seconds)
  • [08:17:03] * yemartin (~yemartin@m002253.ppp.asahi-net.or.jp) Quit (Read error: Connection timed out)
  • [08:18:25] * dob_ (~dob_@2002:5fd0:aa48:0:6c99:acf9:9d26:711b) has joined #beagle
  • [08:18:25] * c10ud (~c10ud@emesene/dictator/c10ud) has joined #beagle
  • [08:18:34] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [08:18:34] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [08:18:56] * dob__ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) has joined #beagle
  • [08:19:23] * yemartin (~yemartin@m002253.ppp.asahi-net.or.jp) has joined #beagle
  • [08:20:41] * vagrantc (~vagrant@freegeek/vagrantc) Quit (Quit: leaving)
  • [08:21:39] * NulL` (~bleh1@92.39.201.91) Quit (Ping timeout: 276 seconds)
  • [08:22:57] * dob_ (~dob_@2002:5fd0:aa48:0:6c99:acf9:9d26:711b) Quit (Ping timeout: 276 seconds)
  • [08:26:03] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [08:26:41] * florian_kc (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [08:26:51] * florian_kc is now known as florian
  • [08:29:27] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [08:31:09] <anujdeshpande> i was wondering if anyone could tell me what i am doing wrong
  • [08:31:09] <anujdeshpande> http://hipstercircuits.com/serial-over-usb-on-beaglebone/
  • [08:31:09] <anujdeshpande> following this guide
  • [08:31:52] <anujdeshpande> how would one load g_serial on bbb ??
  • [08:31:52] * yemartin (~yemartin@m002253.ppp.asahi-net.or.jp) Quit (Remote host closed the connection)
  • [08:32:21] <woglinde> anujdeshpande modprobe g_serial?
  • [08:32:37] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [08:32:37] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [08:32:42] <woglinde> because its a linux standard?
  • [08:32:46] <anujdeshpande> no such device
  • [08:32:57] <anujdeshpande> thats what i thought
  • [08:33:30] <anujdeshpande> should i be able see /dev/ttyGS0 ??
  • [08:33:35] <woglinde> btw. its all in the article
  • [08:34:04] <anujdeshpande> i saw the comments and all
  • [08:34:22] * anujdeshpande wonders ..
  • [08:34:33] <woglinde> first check if it is compiled in
  • [08:34:43] <woglinde> in the kernel
  • [08:35:16] <anujdeshpande> how woould one do tht ?/
  • [08:35:24] <woglinde> *sigh*
  • [08:35:36] <woglinde> time to learn how the linux kernel works and can be build
  • [08:35:41] * anujdeshpande feels like a n00b
  • [08:35:48] <woglinde> than you can come back
  • [08:35:57] <somesomething> then*
  • [08:36:04] * anujdeshpande has been in userspace for too long
  • [08:36:42] <woglinde> somesomething I always forget whats right
  • [08:37:02] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Ping timeout: 272 seconds)
  • [08:37:16] <woglinde> need some "eselsbr??cke" again
  • [08:37:32] * eintopf (eintopf@zzz.strace.org) Quit (Remote host closed the connection)
  • [08:37:56] <woglinde> hm ah
  • [08:38:20] <woglinde> than for comparsion
  • [08:38:31] <woglinde> bigger than smaller
  • [08:40:33] * tasslehoff (~tasslehof@77.40.182.98) has joined #beagle
  • [08:41:09] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [08:41:10] <woglinde> hi tasslehoff
  • [08:41:45] <tasslehoff> hi woglinde
  • [08:42:13] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [08:44:02] <anujdeshpande> woglinde: followed the guide again, worked just fine. thanks !
  • [08:46:03] <woglinde> lol
  • [08:46:15] <anujdeshpande> :/
  • [08:46:34] <woglinde> then have fun
  • [08:46:36] <anujdeshpande> suggested reading on this ??
  • [08:46:42] <woglinde> ?
  • [08:46:50] <woglinde> I think it is working?
  • [08:47:01] * boris_G (~boris@CPE-124-176-80-12.lns3.ken.bigpond.net.au) Quit (Quit: This computer has gone to sleep)
  • [08:47:12] <anujdeshpande> yepp. but i just followed instructions
  • [08:47:59] <woglinde> hm
  • [08:48:10] <woglinde> begin with compiling a kernel yourself
  • [08:48:28] <anujdeshpande> hmm.. sounds good
  • [08:49:29] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [08:49:29] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [08:52:51] * Shadyman (~matthew@unaffiliated/shadyman) Quit (Quit: Leaving.)
  • [08:53:13] * gflow (~gflow@nyc-333.nycbit.com) has joined #beagle
  • [08:53:37] * drakkan1000 (~drakkan@dynamic-adsl-94-36-201-100.clienti.tiscali.it) has joined #beagle
  • [08:55:38] * drakkan1000 (~drakkan@dynamic-adsl-94-36-201-100.clienti.tiscali.it) Quit (Client Quit)
  • [08:55:42] <KotH> moin moin
  • [08:55:59] * zeroem (~dhamilton@64.156.167.128) Quit (Ping timeout: 260 seconds)
  • [08:56:12] <woglinde> hi koth
  • [08:56:32] <KotH> hoi woglinde
  • [08:56:43] <KotH> woglinde: have you decided on the chocolate you want? :)
  • [09:00:16] * trigpoint_n9 (~trigpoint@149.254.183.209) has joined #beagle
  • [09:02:34] <ams> what would be the right way to customize a beaglbone angstrom installtion?
  • [09:02:55] <ams> ideally, so that it can be reproduced ... i'm thinking something like chef ... or similar
  • [09:03:18] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 265 seconds)
  • [09:04:15] <LetoThe2nd> ams: angstrom is basicall a collection of oelayer+buildscripts.
  • [09:04:33] <LetoThe2nd> ams: so just add your specific layer including the customized target. done.
  • [09:05:03] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [09:05:03] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [09:06:11] <ams> mm....
  • [09:07:31] <ams> thanks, i think .. not sure i understand how to do that, but i'll look into it :-)
  • [09:07:32] <LetoThe2nd> ams: alternatively you can do a similar thing using poky, taking out the global angstrom package feed and nailing itdown a bit more. but the basic process stays the same.
  • [09:07:50] * scrp3l (~scrp3l@2001:7e8:d001:c01:6a05:caff:fe1d:95ec) Quit (Quit: Leaving)
  • [09:11:32] * mrpackethead (~mrpacketh@203.184.139.6) has joined #beagle
  • [09:11:46] * eballetbo (~eballetbo@43.Red-2-139-180.staticIP.rima-tde.net) has joined #beagle
  • [09:15:36] * zeroem (~dhamilton@76.89.160.217) has joined #beagle
  • [09:17:37] <ams> is there any simple way of running a beaglbone in qemu or some such? doing a port of the steele bank common lisp compiler to arm/bbb, but don't have access to the card right now...
  • [09:18:54] <LetoThe2nd> ams: emulating ARM in qemu is not much of a problem. emulating the beaglebone specifically, e.g. the peripherals is.
  • [09:19:56] <ams> arm would be good enough for now, at least the bulk work
  • [09:19:59] <av500> you dont need to emulate the BBB to port lisp
  • [09:20:08] <LetoThe2nd> av500: agreed.
  • [09:20:15] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 260 seconds)
  • [09:20:41] <LetoThe2nd> ams: well then why not just grab poky from the yocto project? you get the base infrastructure+qemu to test all in one.
  • [09:20:56] <ams> depends on what you mean, to port the compiler and assembler, nope, but if you want to write libraries that do bbb stuff, ... different story.
  • [09:21:00] <ams> LetoThe2nd: thanks
  • [09:21:07] <hitlin37> i liked that angstrom page which used to generate custom builds. not sure if its still live.
  • [09:21:42] <LetoThe2nd> hitlin37: "that xyz webpage" does not count as "reproductible" by any means :)
  • [09:23:14] <LetoThe2nd> ams: i actually am working on a way for streamlining the reproduction of poky builds, but its nowhere near leaving my desktop yet.
  • [09:23:56] <hitlin37> it use to work fine with generating custom final image in 10-15 min.i guess that page does not exists anymore
  • [09:24:16] <LetoThe2nd> yes i think narcissus is defunct by now.
  • [09:24:17] <ams> LetoThe2nd: mm...
  • [09:24:28] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [09:24:28] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [09:25:09] <LetoThe2nd> ams: but theres actually no magic involved. if you want to "port" something you should be able to read docs anyways, and the "getting started" docs on the yocto project page are very good.
  • [09:26:03] <hitlin37> ams:also qemu emulating any arm distro would work for your needs.
  • [09:26:32] <LetoThe2nd> hitlin37: like i said, when going the poky way you get the qemu bootstrapping basically for free.
  • [09:26:44] <hitlin37> hmm
  • [09:30:03] * zeroem (~dhamilton@76.89.160.217) has left #beagle
  • [09:31:14] * mrpackethead (~mrpacketh@203.184.139.6) Quit (Ping timeout: 272 seconds)
  • [09:31:28] * DJWillis (~djwillis@cpc2-trow6-2-0-cust204.aztw.cable.virginm.net) Quit (Quit: Manny: It's my scythe. I like to keep it next to where my heart used to be.)
  • [09:31:45] <ams> thanks for the help!
  • [09:36:55] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [09:37:53] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [09:37:53] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [09:39:22] * boris_G (~boris@CPE-124-176-80-12.lns3.ken.bigpond.net.au) has joined #beagle
  • [09:43:33] * kuldeepdhaka (~kuldeepdh@unaffiliated/kuldeepdhaka) has joined #beagle
  • [09:45:21] * q0 (~q@CPE-58-174-77-12.aecz2.woo.bigpond.net.au) Quit (Ping timeout: 252 seconds)
  • [09:45:38] * anujdeshpande (~Thunderbi@117.195.45.92) Quit (Read error: Connection reset by peer)
  • [09:49:09] * anujdeshpande (~Thunderbi@117.195.43.118) has joined #beagle
  • [09:50:35] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [09:51:01] * divine (~divine@71-80-232-57.dhcp.mghl.ca.charter.com) Quit (Ping timeout: 248 seconds)
  • [09:51:27] * shaunbaker (~shaunbake@brick-lane.lbi.co.uk) has joined #beagle
  • [09:56:14] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [09:56:14] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [09:58:19] * mrpackethead (~mrpacketh@203.184.139.5) has joined #beagle
  • [09:58:45] * dob_ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) has joined #beagle
  • [09:59:58] * dob__ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) Quit (Read error: Operation timed out)
  • [10:00:11] * dob_ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) Quit (Remote host closed the connection)
  • [10:00:11] * dwery (~dwery@nslu2-linux/dwery) Quit (Read error: Connection reset by peer)
  • [10:00:34] * mromero (~mromero@69.6.172.82) Quit (Remote host closed the connection)
  • [10:00:43] * dob_ (~dob_@2002:5fd0:aa48:0:b507:4264:ff5:eb4b) has joined #beagle
  • [10:01:47] * dwery (~dwery@nslu2-linux/dwery) has joined #beagle
  • [10:06:15] * mnt_real (~sinan@unaffiliated/mnt-real/x-5039713) has joined #beagle
  • [10:07:35] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [10:09:34] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [10:09:34] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [10:11:38] * scrp3l (~scrp3l@178.63.197.92) has joined #beagle
  • [10:11:42] * mrpackethead (~mrpacketh@203.184.139.5) Quit (Remote host closed the connection)
  • [10:14:50] * anujdeshpande (~Thunderbi@117.195.43.118) Quit (Ping timeout: 265 seconds)
  • [10:17:32] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [10:23:20] * dob__ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) has joined #beagle
  • [10:24:05] * dob__ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) Quit (Remote host closed the connection)
  • [10:24:31] * dob__ (~dob_@2002:5fd0:aa48:0:24f4:f3a:5a39:593) has joined #beagle
  • [10:26:57] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [10:26:57] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [10:27:30] * anujdeshpande (~Thunderbi@117.195.43.118) has joined #beagle
  • [10:27:45] * dob_ (~dob_@2002:5fd0:aa48:0:b507:4264:ff5:eb4b) Quit (Ping timeout: 276 seconds)
  • [10:33:03] * asdfg (75f70307@gateway/web/freenode/ip.117.247.3.7) has joined #beagle
  • [10:33:20] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [10:35:53] <asdfg> Can some one please help me to change the I2C bus speed to 400KHZ in BBB ?
  • [10:36:15] <asdfg> By default it is giving 100 KHz
  • [10:38:12] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 260 seconds)
  • [10:39:43] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [10:39:43] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [10:40:00] * boris_G (~boris@CPE-124-176-80-12.lns3.ken.bigpond.net.au) Quit (Quit: This computer has gone to sleep)
  • [10:42:59] <asdfg> Hellloooooo..............no one here.......
  • [10:45:42] <somesomething> look at the nick list, plently of people online
  • [10:45:59] <somesomething> irc has a feature called idling, ever heard of that?
  • [10:46:11] <asdfg> nope
  • [10:46:12] <somesomething> means lots of people leave their clients open 24/7 without being there
  • [10:46:18] <somesomething> so it takes some times for them to respond
  • [10:46:23] <somesomething> so patience is what you need here
  • [10:46:24] <av500> asdfg: why are you asking me in PM?
  • [10:46:30] <asdfg> :-(
  • [10:47:10] <av500> nobody sits here waiting to answer your questions
  • [10:47:46] <asdfg> av500...so how about changing the i2c speed ...
  • [10:47:59] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 260 seconds)
  • [10:49:11] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [10:49:11] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [10:49:15] <av500> to be honest, I dont know
  • [10:49:48] <asdfg> av500....
  • [10:49:52] <asdfg> :-(
  • [10:50:09] <av500> I would guess either in sysfs or by a modified device tree file
  • [10:50:23] <somesomething> or just use magicTM
  • [10:50:33] <asdfg> i modified device tree ..but not changing
  • [10:50:46] <asdfg> the i2c speed
  • [10:50:47] <somesomething> get your favorite white or black magic book and cast a spell on the BBB
  • [10:51:32] <av500> http://hipstercircuits.com/category/device-tree/
  • [10:52:03] <ynezz> can't you change that with kernel commandline?
  • [10:52:24] <av500> https://groups.google.com/forum/#!topic/beagleboard/vbuM-4oShS8
  • [10:52:29] <av500> there, already answered
  • [10:53:03] <asdfg> I tried that ...but is not changing guys...
  • [10:54:39] <ynezz> what is in dmesg?
  • [10:54:45] <jackmitchell> how are you checking the speed?
  • [10:54:52] <asdfg> in CRO
  • [10:55:01] <jackmitchell> and did you re-compile the dtbo?
  • [10:55:01] <av500> if you tried all that, why didnt you say so?
  • [10:55:03] <asdfg> its is showing 100Khz
  • [10:55:08] * old-papa (ident@206.251.40.208) Quit (Ping timeout: 246 seconds)
  • [10:55:15] <asdfg> sorry for that
  • [10:55:18] <asdfg> av500
  • [10:55:26] <av500> why do we have to pull information out of your nose?
  • [10:55:27] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [10:55:36] <av500> and waste our time
  • [10:55:37] * old-papa (ident@206.251.40.208) has joined #beagle
  • [10:55:37] * old-papa (ident@206.251.40.208) has joined #beagleboard
  • [10:55:37] * old-papa (ident@206.251.40.208) has joined #beaglebone
  • [10:55:42] <ynezz> pastebin your dmesg
  • [10:56:05] * trigpoint_n9 (~trigpoint@149.254.183.209) Quit (Ping timeout: 248 seconds)
  • [10:56:17] <asdfg> bone-capemgr bone_capemgr.8: part_number 'BB-I2C1', version 'N/A' [ 87.850814] bone-capemgr bone_capemgr.8: slot #8: generic override [ 87.850833] bone-capemgr bone_capemgr.8: bone: Using override eeprom data at slot 8 [ 87.850851] bone-capemgr bone_capemgr.8: slot #8: 'Override Board Name,00A0,Override Manuf,BB-I2C1' [ 87.850958] bone-capemgr bone_capemgr.8: slot #8: Requesting part number/version based 'BB-I2C1-00A0.dtbo [ 87
  • [10:56:27] <asdfg> ynezz..
  • [10:56:43] <av500> pastebi
  • [10:56:45] <av500> pastebin
  • [10:56:47] <av500> not paste
  • [10:57:09] <ynezz> and complete dmesg
  • [10:57:44] <av500> such paste
  • [10:57:48] <av500> very words
  • [10:57:56] <av500> wow
  • [10:58:14] * vvu|Log_away is now known as vvu|Log
  • [10:58:24] * vvu|Log is now known as vvu|Log_away
  • [11:00:59] <asdfg> http://pastebin.com/Jp1dQSXZ
  • [11:01:14] <av500> [ 0.153450] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  • [11:01:18] <asdfg> ynezz..
  • [11:01:21] <av500> [ 0.166818] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
  • [11:01:47] <av500> [ 87.859870] omap_i2c 4802a000.i2c: bus 2 rev0.11 at 100 kHz
  • [11:02:01] <asdfg> Bus 0 not accessible on headers
  • [11:02:09] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [11:02:09] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [11:02:13] * somesomething eats asdfg
  • [11:02:17] <asdfg> I want bus 1 and bus 2
  • [11:02:26] <hitlin37> i guess it would be helpful for newbie if there is a way in irc client which shows related google search results for the basic stuff asked.
  • [11:02:46] <av500> pastebin your device tree
  • [11:03:00] <av500> also pastebin the device tree dump from the running system
  • [11:05:02] <asdfg> av500 http://pastebin.com/vh5TqsTi
  • [11:05:33] * anujdeshpande (~Thunderbi@117.195.43.118) Quit (Quit: anujdeshpande)
  • [11:07:33] <av500> https://groups.google.com/d/msg/beagleboard/vbuM-4oShS8/Yg-phLqNsy4J
  • [11:08:33] <av500> you read that, right?
  • [11:09:16] <asdfg> av500..I read that i done exactly they said..
  • [11:09:24] * dlan (~dennis@gentoo/developer/dlan) Quit (Quit: Lost terminal)
  • [11:09:39] <av500> ok
  • [11:10:03] <av500> so, dump the dt file from the running kernel
  • [11:12:23] * dlan (~dennis@gentoo/developer/dlan) has joined #beagle
  • [11:12:43] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 260 seconds)
  • [11:13:32] <asdfg> av500 http://pastebin.com/HheKcn5r
  • [11:13:51] <asdfg> where i changed in am335x-boneblack.dts
  • [11:14:33] <av500> you can dump the DT of the running kernel
  • [11:14:37] * monoxide_13 (~monoxide_@97-92-67-54.dhcp.stcd.mn.charter.com) Quit (Remote host closed the connection)
  • [11:14:47] <av500> so you see what the kernel uses as device tree
  • [11:15:07] <hitlin37> wow, something like this already exists : http://oreilly.com/pub/h/2728
  • [11:16:30] <asdfg> av500 .. can you just give the command to dump it
  • [11:16:40] <asdfg> dt
  • [11:17:44] <av500> /proc/device-tree
  • [11:18:13] * Vostok (vostok@kapsi.fi) Quit (Ping timeout: 246 seconds)
  • [11:18:34] * j_h (jarih@kapsi.fi) Quit (Ping timeout: 246 seconds)
  • [11:20:23] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [11:20:23] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [11:21:53] * mythos (~mythos@unaffiliated/mythos) Quit (Ping timeout: 252 seconds)
  • [11:23:56] * das (~das@217.108.83.254) Quit (Remote host closed the connection)
  • [11:24:36] * firemanxbr (~firemanxb@201.37.169.138) Quit (Read error: Connection reset by peer)
  • [11:27:31] * firemanxbr (~firemanxb@201.37.169.138) has joined #beagle
  • [11:28:35] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 260 seconds)
  • [11:30:15] * Vostok (vostok@kapsi.fi) has joined #beagleboard
  • [11:30:17] * j_h (jarih@kapsi.fi) has joined #beagle
  • [11:30:34] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [11:30:34] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [11:34:33] * anujdeshpande (~Thunderbi@117.195.43.118) has joined #beagle
  • [11:34:45] * trigpoint_n9 (~trigpoint@149.254.186.8) has joined #beagle
  • [11:38:32] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 246 seconds)
  • [11:39:12] * das (~das@217.108.83.254) has joined #beagle
  • [11:41:05] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [11:41:05] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [11:41:17] * bizarro_1 (~bizarro_1@80.30.235.217) has joined #beagle
  • [11:47:20] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Ping timeout: 252 seconds)
  • [11:48:40] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 246 seconds)
  • [11:50:32] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [11:50:32] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [11:58:31] * uwe_ (~uwe_@dslb-088-066-160-105.pools.arcor-ip.net) Quit (Ping timeout: 272 seconds)
  • [11:59:33] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [12:00:14] * uwe_ (~uwe_@dslb-088-066-160-105.pools.arcor-ip.net) has joined #beagle
  • [12:01:26] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [12:01:26] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [12:02:52] * johnwalkr (~walkerj@net020.mech.tohoku.ac.jp) has joined #beagle
  • [12:05:13] * Guest94623 (45fbe212@gateway/web/freenode/ip.69.251.226.18) Quit (Ping timeout: 272 seconds)
  • [12:06:51] * mythos (~mythos@unaffiliated/mythos) has joined #beagle
  • [12:07:19] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) Quit (Ping timeout: 260 seconds)
  • [12:08:28] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) has joined #beagle
  • [12:09:34] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [12:09:56] * hp_ (dce1c88a@gateway/web/freenode/ip.220.225.200.138) has joined #beagle
  • [12:10:16] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [12:10:16] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [12:10:19] * hp_ is now known as Guest29314
  • [12:10:47] * Guest29314 (dce1c88a@gateway/web/freenode/ip.220.225.200.138) Quit (Client Quit)
  • [12:17:42] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [12:18:31] * Pullphinger (~Pullphing@c-24-13-69-42.hsd1.il.comcast.net) has joined #beagle
  • [12:18:48] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [12:18:48] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [12:19:08] * anujdeshpande (~Thunderbi@117.195.43.118) Quit (Remote host closed the connection)
  • [12:24:07] * konradoo87 (~debian@81.6.139.17) Quit (Ping timeout: 272 seconds)
  • [12:24:46] * konradoo77 (~debian@81.6.139.17) has joined #beagle
  • [12:26:17] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 265 seconds)
  • [12:27:28] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [12:27:28] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [12:32:16] * tasslehoff (~tasslehof@77.40.182.98) Quit (Quit: WeeChat 0.4.0)
  • [12:34:01] * LordDVG (~LordDVG@unaffiliated/lorddvg) has joined #beagle
  • [12:34:23] * LordDVG (~LordDVG@unaffiliated/lorddvg) Quit (Remote host closed the connection)
  • [12:34:38] * LordDVG (~LordDVG@unaffiliated/lorddvg) has joined #beagle
  • [12:39:50] * jacekows1i is now known as jacekowski
  • [12:40:03] * ssl_ (543b1ed2@gateway/web/freenode/ip.84.59.30.210) has joined #beagle
  • [12:40:05] * ssl_ (543b1ed2@gateway/web/freenode/ip.84.59.30.210) Quit (Client Quit)
  • [12:40:23] * ssl_ (543b1ed2@gateway/web/freenode/ip.84.59.30.210) has joined #beagle
  • [12:41:54] * kuldeepdhaka (~kuldeepdh@unaffiliated/kuldeepdhaka) Quit (Ping timeout: 252 seconds)
  • [12:55:13] <ssl_> hello. I have created my own device tree file to enable output to my custom LCD screen, which works great, but i have two minor problems/questions: 1. since i enabled my selfmade dtbo file with capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN capemgr.enable_partno=LCD-G104 the beaglebone black is waiting for exactly 60 seconds at boot. My dmesg states "capemgr: failed to load firmware: LCD-G104-00A0.dtbo" but then again, it IS workt
  • [12:55:22] <ssl_> the LCD, so I don't know what's wrong here. second question: as you can see above, I tried to disable the HDMI dtbo files so they don't interfere with mine, but when I cat the slots file, I see that they are still somehow in there: [...] 5: ff:P-O-- Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI 6: ff:P-O-- Bone-Black-HDMIN,00A0,Texas Instrument,BB-BONELT-HDMIN 7: ff:P-O-L Override Board Name,00A0,Override Manuf,LCD-G104 This is
  • [12:55:29] <ssl_> because it is actually working, but it may have to do with my first question so I thought Ill let you know
  • [12:57:40] * kuldeepdhaka (~kuldeepdh@unaffiliated/kuldeepdhaka) has joined #beagle
  • [12:57:47] * asdfg (75f70307@gateway/web/freenode/ip.117.247.3.7) Quit (Ping timeout: 272 seconds)
  • [13:07:23] * dogrocket (~dogrocket@pool-71-180-22-73.tampfl.fios.verizon.net) has joined #beagle
  • [13:08:35] <dogrocket> anyone have links to info on how to use mcasp to output i2s audio to a codec?
  • [13:12:24] * ssl_ (543b1ed2@gateway/web/freenode/ip.84.59.30.210) Quit (Quit: Page closed)
  • [13:13:01] * dob__ (~dob_@2002:5fd0:aa48:0:24f4:f3a:5a39:593) Quit (Remote host closed the connection)
  • [13:13:24] <dogrocket> theres bits and pieces on net about it, but I need step by step.. kinda simple that way :/
  • [13:13:27] * dob_ (~dob_@2002:5fd0:aa48:0:24f4:f3a:5a39:593) has joined #beagle
  • [13:13:40] * kevinsc (~kevinsc@nat/ti/x-ouujcijtmaoyjknc) has joined #beagle
  • [13:13:51] <jackmitchell> dogrocket: do you have an audio cape?
  • [13:14:08] * konradoo77 (~debian@81.6.139.17) Quit (Ping timeout: 265 seconds)
  • [13:14:19] <dogrocket> nope its a separate codec board
  • [13:14:37] * konradoo77 (~debian@81.6.139.17) has joined #beagle
  • [13:14:48] * cosmo1t (znc@cosmo.2y.net) Quit (Read error: Connection reset by peer)
  • [13:15:11] <dogrocket> it has a 48khz clock output and supposedly you can get the bbb to sync on it, so you can transfer audio to codec
  • [13:15:19] * dob_ (~dob_@2002:5fd0:aa48:0:24f4:f3a:5a39:593) Quit (Remote host closed the connection)
  • [13:15:25] * dob_ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) has joined #beagle
  • [13:15:32] * kevinsc (~kevinsc@nat/ti/x-ouujcijtmaoyjknc) has left #beagle
  • [13:15:49] <jackmitchell> ah, well you're on your own I'm afraid if it's a custom board; it will be a matter of setting up the device tree to recognise your codec and integrate it with the i2s subsystem
  • [13:15:58] <jackmitchell> is the codec supported by linux?
  • [13:16:10] <dogrocket> mcasp0_aclkx pin, but no clue how to get it to slave
  • [13:16:52] * I440r (~mark4@cpe-192-136-220-10.tx.res.rr.com) has joined #beagle
  • [13:17:33] <dogrocket> not that i know of... supposedly its not too complicated, linux doesnt need to know codec specifics, it just needs to know to send i2s.. but ive been wrong lol
  • [13:18:21] <jackmitchell> that's possible, if it's just a "dumb" codec which will happily accept i2s
  • [13:18:35] <jackmitchell> I woudl look at the audio cape dtbo
  • [13:18:45] <jackmitchell> and see if you can hack something from that into a workable solution
  • [13:19:09] <dogrocket> that might be a good idea, does audio cape use i2s?
  • [13:19:18] <dogrocket> err mcasp
  • [13:19:21] <jackmitchell> it might just be a matter of enabling the i2s bus and then pushing stuff to it
  • [13:19:24] <jackmitchell> yeah mcasp
  • [13:19:39] <dogrocket> awesome.. that might be big help
  • [13:20:59] <dogrocket> will get all the schematics and reference docs for it... see if i can dig out info i need
  • [13:22:11] <av500> report back, doing dumb i2s is on my todo list too
  • [13:23:46] * cosmo1t (znc@cosmo.2y.net) has joined #beagle
  • [13:26:56] <dogrocket> lol... ok
  • [13:28:51] <dogrocket> the dac has usb but im getting stuttering when accessing usb cdrom drive.. off same hub i even tried to turn up process priority, so i figured i would try mcasp/i2s see if that clears it up
  • [13:30:46] <dogrocket> me thinking because the dac usb is 1.1 or slow mode, and cdrom is 2.0 might have something to do with it
  • [13:31:33] <av500> yes
  • [13:31:42] <av500> USB does not garantee min data rates
  • [13:31:48] * ctag (~ctag@c-68-62-170-154.hsd1.al.comcast.net) has joined #beagle
  • [13:31:49] <av500> there is ISO mode, but nobody gets that right
  • [13:32:06] <av500> dunno if MUSB even supports it correctly
  • [13:32:20] <av500> so its best effort and often timing critical clients lose
  • [13:32:21] <dogrocket> heh, wouldnt it figure its a TI codec too..
  • [13:32:35] <av500> on a PC, you just move it to a separate host port
  • [13:32:54] <av500> I dont think it matter if TI or not
  • [13:33:46] <dogrocket> yeah, i even contemplated using the serial fttp usb port, but being its a client it would be heck to get it too work
  • [13:34:06] <dogrocket> oops ftti or whatever it is
  • [13:35:53] <av500> ftdi
  • [13:35:54] * kiilo (~kiilo@77-56-99-130.dclient.hispeed.ch) has joined #beagle
  • [13:35:56] <av500> that wont work
  • [13:36:02] <av500> it gives you client
  • [13:36:03] <av500> not host
  • [13:37:53] * RichardPotthoff (~richardpo@c-68-38-232-139.hsd1.nj.comcast.net) Quit ()
  • [13:37:56] <dogrocket> ok.. solves that
  • [13:38:31] <av500> so please proceed with dumb I2S :)
  • [13:40:19] * jjc (d99c8582@gateway/web/freenode/ip.217.156.133.130) has joined #beagle
  • [13:41:52] * anujdeshpande (~Thunderbi@59.99.244.28) has joined #beagle
  • [13:42:06] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) has joined #beagle
  • [13:43:22] * nighty^__ (~nighty@lns-bzn-49f-62-147-170-46.adsl.proxad.net) has joined #beagle
  • [13:43:22] * nighty^__ (~nighty@lns-bzn-49f-62-147-170-46.adsl.proxad.net) has joined #beagleboard
  • [13:43:22] <jjc> Is there a way to change GPIO pins on the fly? Or does it require a restart each time
  • [13:44:18] <dogrocket> lol.. im looking it up
  • [13:44:27] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [13:44:36] * nighty^__ (~nighty@lns-bzn-49f-62-147-170-46.adsl.proxad.net) Quit (Client Quit)
  • [13:45:18] * eikeon (~eikeon@c-98-218-6-128.hsd1.dc.comcast.net) has joined #beagle
  • [13:47:37] * RichardPotthoff (~richardpo@c-68-38-232-139.hsd1.nj.comcast.net) has joined #beagle
  • [13:48:43] <jackmitchell> jjc: you can do it with devicetree overlays
  • [13:49:06] <jackmitchell> if you mean changing the pinmuxing of a gpio pin that is
  • [13:49:34] <jjc> jackmitchell: that will allow me to change a single pin high or low without the need of a reeboot? or without messing up all the other pins?
  • [13:50:05] <jackmitchell> jjc: if you only wish to change the value of the pin, then you can do that through sysfs
  • [13:50:35] <jjc> how would I do that? I am not familiar with sysfs
  • [13:50:51] <jackmitchell> millions of guides on google
  • [13:50:58] <jjc> ok, ill have a look
  • [13:51:14] <jackmitchell> "beaglebone change gpio value sysfs" should get you some decent results
  • [13:51:28] * jbdatko (~jbdatko@fsf/member/jbdatko) has joined #beagle
  • [13:51:43] <av500> or use bonescript via a python lib in the cloub like normal people
  • [13:51:47] <av500> cloud*
  • [13:53:09] <jjc> @Av500: i'm afraid I can't do that due to the nature of the end use of the beagle
  • [13:54:51] * trigpoint_n9_ (~trigpoint@054159aa.skybroadband.com) has joined #beagle
  • [13:54:59] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Ping timeout: 252 seconds)
  • [13:55:14] <dogrocket> wow... the audio cape uses the biggest .asound configuration file ive ever seen.
  • [13:55:20] <jackmitchell> jjc: are you trying to do it in a programming language, or in a script or by hand?
  • [13:55:29] <jackmitchell> dogrocket: I don't think you need it
  • [13:55:52] <jackmitchell> I've been working with a client on the audio cape for the past few weeks and we've never needed the asound config
  • [13:56:02] <dogrocket> was thinking not.. all i need is volume control
  • [13:56:51] * anujdeshpande (~Thunderbi@59.99.244.28) Quit (Quit: anujdeshpande)
  • [13:57:43] <jjc> jackmitchell: either in python or using a script
  • [13:57:52] <av500> dogrocket: url?
  • [13:58:10] * trigpoint_n9 (~trigpoint@149.254.186.8) Quit (Ping timeout: 246 seconds)
  • [13:58:59] <dogrocket> here we goo... Each data frame is
  • [13:59:00] <dogrocket> synchronized by the transmit frame sync signal (AUD_FSX) from the McASP. T
  • [13:59:03] * trigpoint (~phil@054159aa.skybroadband.com) has joined #beagle
  • [13:59:14] <av500> yes
  • [14:00:47] <jackmitchell> jjc: sysfs is a good choice then, as I say loads of guides on google
  • [14:02:41] <dogrocket> Each data frame is
  • [14:02:41] <dogrocket> the bummer is they are doing inverse with frequency clock, the codec is using the beagles freq clock and i want beagle to use the codecs clock because what ive read is you dont want to use the 12mhz clock because its not high enough for low jitter. The codec supplys a more reliable clock
  • [14:03:55] <av500> but msacp should support ext clock too
  • [14:04:00] <av500> fiddle with the DT
  • [14:04:28] <dogrocket> yes it does... thats where im having problems.. how to turn it on.
  • [14:04:36] <dogrocket> https://github.com/CircuitCo/BeagleBone-Audio/blob/master/BeagleBone-Audio-RevA1-srm.pdf?raw=true
  • [14:04:54] <dogrocket> thats the pdf file link for audio cape
  • [14:06:56] <jackmitchell> dogrocket: you may need to dig into the davinci-mcasp driver to see if it's possible to set an external clock
  • [14:08:17] <dogrocket> if that link doesnt work heres the audio cape main page... look for system reference manual down at bottom of page
  • [14:08:22] <dogrocket> http://beagleboardtoys.info/index.php?title=BeagleBone_Audio
  • [14:08:29] * Peuc (~Peuc@ip-96-43-229-243.dsl.netrevolution.com) has joined #beagle
  • [14:09:14] * kevinsc (~kevinsc@nat/ti/x-oaetwzvexyqtgtuz) has joined #beagle
  • [14:09:36] * contempt (contempt@unaffiliated/contempt) Quit (Remote host closed the connection)
  • [14:10:01] <dogrocket> I've read it is possible to set, but something about it wasnt working from linux for some reason
  • [14:10:11] <dogrocket> err linux command at least
  • [14:11:04] <dogrocket> probably someone trying to use a command that worked before dtb was used
  • [14:12:38] <dogrocket> also I heard you have to disable hdmi to use i2s because its tied to it
  • [14:13:07] <jackmitchell> dogrocket: yes, hdmi needs to be disabled on beaglebone blacks
  • [14:13:47] * kevinsc (~kevinsc@nat/ti/x-oaetwzvexyqtgtuz) Quit (Ping timeout: 260 seconds)
  • [14:13:59] * rob_w (~bob@unaffiliated/rob-w/x-1112029) Quit (Quit: Ex-Chat)
  • [14:14:53] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [14:14:53] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [14:18:33] <dogrocket> found step by step for disabling hdmi if anyone needs
  • [14:18:52] <dogrocket> http://www.logicsupply.com/blog/2013/07/18/disabling-the-beaglebone-black-hdmi-cape/
  • [14:19:00] <av500> how many steps?
  • [14:19:07] <av500> is there a break in the middle?
  • [14:19:44] <dogrocket> this for short version...
  • [14:19:48] <dogrocket> optargs=quiet capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN
  • [14:19:59] <dogrocket> put that in uEnv.txt
  • [14:20:25] * kuldeepdhaka (~kuldeepdh@unaffiliated/kuldeepdhaka) Quit (Ping timeout: 245 seconds)
  • [14:20:28] * av500 reads that as disable_panto
  • [14:20:59] <dogrocket> disable_partno lol
  • [14:21:56] * eikeon (~eikeon@c-98-218-6-128.hsd1.dc.comcast.net) Quit (Quit: eikeon)
  • [14:23:14] <ynezz> no video tutorial?
  • [14:23:23] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [14:23:48] <av500> ynezz: can you explain me how to use a video tutorial?
  • [14:23:57] <dogrocket> would be nice...
  • [14:24:13] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [14:24:13] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [14:25:16] <dogrocket> looks like mcasp / i2c needs these pins on beagle 37 thru 41
  • [14:25:38] <ynezz> av500: 1. Popcorn
  • [14:25:46] <ynezz> other steps are boring
  • [14:26:52] <dogrocket> whiskey after trying to figure this out..
  • [14:28:21] * prpplague (~prpplague@107-206-64-184.lightspeed.rcsntx.sbcglobal.net) Quit (Quit: Leaving)
  • [14:28:59] * kuldeepdhaka (~kuldeepdh@unaffiliated/kuldeepdhaka) has joined #beagle
  • [14:31:33] <panto> av500, cool, I'll apply for a disability stipend
  • [14:31:45] <av500> :)
  • [14:32:13] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [14:33:26] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [14:33:26] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [14:33:58] * terrys (~terrys@ks-67-239-99-108.dhcp.embarqhsd.net) Quit (Ping timeout: 272 seconds)
  • [14:34:13] * woglinde (~henning@fb-n15-11.unbelievable-machine.net) Quit (Ping timeout: 248 seconds)
  • [14:36:19] <dogrocket> av500 here is something on setting up i2s... it looks pretty ugly but this guy evidently got dummy send and more to work.
  • [14:36:28] <dogrocket> http://e2e.ti.com/support/embedded/linux/f/354/t/185810.aspx
  • [14:37:04] <dogrocket> like jack said gotta set up davinci-mcasp.c
  • [14:37:27] * kevinsc (~kevinsc@nat/ti/x-fwndddxipblekbio) has joined #beagle
  • [14:40:00] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) Quit (Ping timeout: 245 seconds)
  • [14:41:02] * SoCo_cpp_ (~soco@gateway/tor-sasl/sococpp/x-93321146) has joined #beagle
  • [14:41:12] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [14:41:16] * Rickta59 (~Rickta59@cpe-174-106-144-066.ec.res.rr.com) Quit (Quit: leaving)
  • [14:42:13] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [14:42:13] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [14:44:00] * mromero (~mromero@69.6.172.82) has joined #beagle
  • [14:49:02] * terrys (~terrys@ks-67-239-99-108.dhcp.embarqhsd.net) has joined #beagle
  • [14:50:08] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [14:50:21] * thurgood (~thurgood@cpe-70-113-204-247.austin.res.rr.com) Quit (Remote host closed the connection)
  • [14:50:53] * thurgood (~thurgood@cpe-70-113-204-247.austin.res.rr.com) has joined #beagle
  • [14:51:10] * thurgood (~thurgood@cpe-70-113-204-247.austin.res.rr.com) Quit (Remote host closed the connection)
  • [14:51:27] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [14:51:27] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [14:53:54] * granito-laptop (~granito@ncsu-nat-2.ncstate.net) has joined #beagle
  • [14:59:54] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [15:00:55] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [15:00:55] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [15:03:55] * sellout- (~Adium@75-166-123-23.hlrn.qwest.net) Quit (Quit: Leaving.)
  • [15:04:12] * thurgood (~thurgood@64.132.24.36) has joined #beagle
  • [15:07:02] * anujdeshpande (~Thunderbi@59.99.244.28) has joined #beagle
  • [15:07:26] * dgerlach (~dave@nat/ti/x-gqzkyvnnpujorrmz) has joined #beagle
  • [15:08:20] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [15:08:45] * anujdeshpande (~Thunderbi@59.99.244.28) Quit (Client Quit)
  • [15:09:49] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [15:09:49] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [15:11:32] * kevinsc (~kevinsc@nat/ti/x-fwndddxipblekbio) has left #beagle
  • [15:13:35] * c10ud` (~c10ud@emesene/dictator/c10ud) has joined #beagle
  • [15:14:05] * c10ud (~c10ud@emesene/dictator/c10ud) Quit (Read error: Operation timed out)
  • [15:17:17] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 246 seconds)
  • [15:18:41] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [15:18:41] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [15:19:28] * cap42 (~Adium@pak.twistedbit.com) has joined #beagle
  • [15:21:36] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Remote host closed the connection)
  • [15:23:02] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [15:23:29] * vmayoral (~vmayoral@nat-psv.sssup.it) has joined #beagle
  • [15:26:09] * anujdeshpande (~Thunderbi@59.99.244.28) has joined #beagle
  • [15:29:11] * granito-laptop (~granito@ncsu-nat-2.ncstate.net) Quit (Quit: Leaving.)
  • [15:32:25] * anujdeshpande (~Thunderbi@59.99.244.28) Quit (Remote host closed the connection)
  • [15:34:20] * sellout- (~Adium@161.98.9.235) has joined #beagle
  • [15:38:44] * kbart (~KBart@213.197.143.19) Quit (Remote host closed the connection)
  • [15:41:18] * ssl_ (4d0de0b2@gateway/web/freenode/ip.77.13.224.178) has joined #beagle
  • [15:42:01] <dogrocket> av500 you still there?
  • [15:42:21] * dogrocket (~dogrocket@pool-71-180-22-73.tampfl.fios.verizon.net) Quit ()
  • [15:42:39] * dogrocket (~dogrocket@pool-71-180-22-73.tampfl.fios.verizon.net) has joined #beagle
  • [15:42:55] <dogrocket> av500 you still there?
  • [15:43:31] <dogrocket> av500 you still there?
  • [15:44:56] <dogrocket> hello
  • [15:45:06] <av500> yes
  • [15:45:29] <dogrocket> sorry for spam... my screen wasnt scrollin, duh
  • [15:47:46] <dogrocket> if you want to look at this for i2s to codec see if you can get the idea they are talking about in this forum, what im getting from it is you dont have to do anything except disable hdmi and hook up pins and i2s will work if device on other end understands the i2s mcasp speak
  • [15:49:23] <av500> you can load the audio cape DT overlay
  • [15:49:36] <av500> but that does not use master clock as input
  • [15:49:41] <av500> so you need to tweak it
  • [15:49:46] <dogrocket> http://www.element14.com/community/community/knode/single-board_computers/next-gen_beaglebone/blog/2013/05/28/bbb--audio-notes
  • [15:50:27] <dogrocket> odd but what they are saying you dont even need to do that... hdmi is implemented as a virtual cape !
  • [15:51:02] <av500> if your codec can work with the I2S that BBB provides, you only need to hook it up
  • [15:51:13] * wiznerd (~wiznerd@192.227.251.220) Quit (Ping timeout: 246 seconds)
  • [15:51:58] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [15:54:40] * boris_G (~boris@58.165.161.10) has joined #beagle
  • [15:54:54] <dogrocket> yep.. check out the link where he hand builds a dac near top of page
  • [15:55:19] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Quit: Client exiting)
  • [15:55:44] <dogrocket> here this guy says.. I figure it out, you didnt write any driver or kernel code to get the i2s works on your BBB?
  • [15:55:44] <dogrocket> You just connect the pin and use the originally HDMI driver is that correct?
  • [15:56:35] <dogrocket> dac creator says... That's correct, it is using the existing driver for HDMI.
  • [15:57:11] <dogrocket> said he fell upon it by accident.. lol
  • [15:57:30] * bearsh|work (~quassel@189-92.77-83.cust.bluewin.ch) Quit (Read error: No route to host)
  • [15:58:47] * bearsh|work (~quassel@189-92.77-83.cust.bluewin.ch) has joined #beagle
  • [15:58:48] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Read error: Connection reset by peer)
  • [15:59:10] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [15:59:34] <dogrocket> um wait.. he didnt say he needed to disable hdmi, i2s daisy chains doesnt it? maybe he just hooked it up?
  • [16:00:22] * jbdatko (~jbdatko@fsf/member/jbdatko) Quit (Ping timeout: 272 seconds)
  • [16:00:53] * anilp (4a400832@gateway/web/freenode/ip.74.64.8.50) has joined #beagle
  • [16:01:11] <anilp> im not able to view get one ssh option
  • [16:01:21] * mnt_real (~sinan@unaffiliated/mnt-real/x-5039713) Quit (Quit: Ex-Chat)
  • [16:01:26] <anilp> i just flashed my BBB
  • [16:01:37] <anilp> please help
  • [16:01:45] <anilp> i want to implement basic UART
  • [16:03:36] <anilp> gateone^
  • [16:04:39] <dogrocket> what did you flash your bbb to kernel/distro?
  • [16:05:18] <anilp> angstrom dist
  • [16:05:23] <anilp> sorry m a newbie
  • [16:05:31] * slask_o1 (uf0@nat/axis/x-agiefhxxqxitucvo) has joined #beagle
  • [16:05:39] <dogrocket> so you cant get gateone to come up?
  • [16:05:47] <anilp> yea
  • [16:05:55] * slask_o1 (uf0@nat/axis/x-agiefhxxqxitucvo) has joined #beaglebone
  • [16:05:55] <anilp> i can ssh through terminal
  • [16:06:01] * slask_o1 (uf0@nat/axis/x-agiefhxxqxitucvo) has left #beaglebone
  • [16:06:09] * slask_o1 (uf0@nat/axis/x-agiefhxxqxitucvo) has left #beagle
  • [16:06:30] <dogrocket> hrm.. sounds like node.js is not either up or not seeing port
  • [16:07:17] <dogrocket> not sure how you check node.js stats
  • [16:07:54] <anilp> can u tell me how to gateone
  • [16:07:56] <dogrocket> can you get to beaglebone website at 192.168.1.7?
  • [16:08:19] <anilp> yea i have beagle bone black so i guess its 192.168.7.2
  • [16:08:27] <anilp> n its working
  • [16:09:12] <dogrocket> try clicking on one of the led tests in website... that uses node.js I think gateone is a node.js app also
  • [16:09:53] <dogrocket> sorry wrong ip.. your right
  • [16:11:23] <anilp> okay ill try that wait
  • [16:11:36] <dogrocket> if the led test works gateone should work im guessing
  • [16:11:44] <anilp> yup thats working
  • [16:12:27] <dogrocket> and when u click on gateone its not?
  • [16:13:33] <anilp> thats the thing there is no option of gateone in the beagle bone website under cloud9
  • [16:13:52] <anilp> it just shows update image n then cloud 9
  • [16:13:57] <anilp> no gate one ssh
  • [16:14:16] <dogrocket> click on cloud9 that starts gateone i think
  • [16:15:09] * tema (~tema@178-16-155-142.obit.ru) has joined #beagle
  • [16:15:20] * wiznerd (~wiznerd@192.227.251.220) has joined #beagle
  • [16:15:23] <anilp> i did that also , i even ran a blinked program from there
  • [16:15:26] <anilp> didn't help
  • [16:16:06] <dogrocket> blinked program worked though? thats wierd.. like its missing a file or something
  • [16:16:34] <anilp> do you have which file
  • [16:16:34] <anilp> >
  • [16:16:40] <anilp> yup it worked
  • [16:17:05] <dogrocket> might try clearing browser cache and restart browser just to try and see if it fixes... I think i had to do that once
  • [16:17:25] <anilp> alryt ill do that
  • [16:17:55] <dogrocket> cloud9 kinda touchy
  • [16:18:22] <dogrocket> gateone/cloud9 rather
  • [16:19:10] <anilp> i cleared by browser data didn't work
  • [16:19:26] <anilp> i can't implement hart in any other way ?>
  • [16:19:33] <anilp> UART^
  • [16:20:27] <dogrocket> you ssh in and use nodejs manually, have it load a file
  • [16:20:35] * trigpoint_n9__ (~trigpoint@genld-218-241.t-mobile.co.uk) has joined #beagle
  • [16:20:45] <jkridner> anilp: old Gate One was too buggy. New version may fix issues.
  • [16:21:25] <anilp> @jkrinder : i just updated my os n m all these problems
  • [16:21:25] <dogrocket> actually type node (filename) and it should run it to console
  • [16:21:28] * height8 (~height8@pdpc/supporter/active/height8) Quit (Quit: Fell off the ledge)
  • [16:21:54] <anilp> @dogrocket : what exactly should i do ?
  • [16:22:02] <anilp> ssh into beagle bone n then ?
  • [16:22:15] <dogrocket> you allready have the code in a file?
  • [16:22:34] <anilp> ahhh no not really
  • [16:22:52] * eballetbo (~eballetbo@43.Red-2-139-180.staticIP.rima-tde.net) Quit (Quit: Leaving)
  • [16:22:53] <anilp> the tutorial which i was referring said i need gateone
  • [16:22:53] * Daniele (~daniele@unaffiliated/daniele) Quit (Ping timeout: 272 seconds)
  • [16:23:04] <anilp> adafruit tutorial
  • [16:23:04] <dogrocket> yep... ssh in edit a file with script you want, then execute node filename
  • [16:23:32] <dogrocket> just copy it and paste it into nano
  • [16:23:46] <dogrocket> use nano its pretty good editor
  • [16:23:55] * bizarro_1 (~bizarro_1@80.30.235.217) Quit (Read error: Connection reset by peer)
  • [16:24:00] <anilp> how do install nano ?
  • [16:24:05] * trigpoint_n9_ (~trigpoint@054159aa.skybroadband.com) Quit (Ping timeout: 248 seconds)
  • [16:24:23] <dogrocket> nano should be in angstrom i think
  • [16:24:33] <dogrocket> ssh in and type nano
  • [16:24:52] * bizarro_1 (~bizarro_1@80.30.235.217) has joined #beagle
  • [16:25:16] <anilp> yea got it
  • [16:25:22] * vinifr (~vini@177.98.169.10) has joined #beagle
  • [16:25:22] <anilp> war should i do now
  • [16:25:25] <anilp> wat ?
  • [16:25:31] * konrad_1415 (59495f20@gateway/web/freenode/ip.89.73.95.32) has joined #beagle
  • [16:25:37] * vmayoral (~vmayoral@nat-psv.sssup.it) Quit (Quit: vmayoral)
  • [16:25:41] <anilp> type in the script ?
  • [16:25:52] <dogrocket> now just copy the script if you have it, then right click and paste into nano
  • [16:25:57] * jbdatko (~jbdatko@209.133.117.5) has joined #beagle
  • [16:25:57] * jbdatko (~jbdatko@209.133.117.5) Quit (Changing host)
  • [16:25:57] * jbdatko (~jbdatko@fsf/member/jbdatko) has joined #beagle
  • [16:26:18] * anujdeshpande (~Thunderbi@59.99.244.28) has joined #beagle
  • [16:27:18] <dogrocket> then use cntrl o it will ask for filename, then when all done ctrl x
  • [16:27:38] * prpplague (~danders@rrcs-97-77-26-26.sw.biz.rr.com) has joined #beagle
  • [16:27:44] <anilp> okay thanx a lot was searching for that only
  • [16:28:22] <dogrocket> cool.. then just type node filename should run and give message to console
  • [16:30:59] * wiznerd (~wiznerd@192.227.251.220) Quit (Ping timeout: 252 seconds)
  • [16:31:06] <dogrocket> real linux programmers use the command line anyway... haha
  • [16:31:39] <anilp> sorry, but how do u install python lib on BBB
  • [16:31:40] <anilp> ?
  • [16:31:51] * jjc (d99c8582@gateway/web/freenode/ip.217.156.133.130) Quit (Ping timeout: 272 seconds)
  • [16:32:11] <anilp> i thought gate one was the only way
  • [16:32:12] <anilp> :P
  • [16:32:35] * height8 (~height8@pdpc/supporter/active/height8) has joined #beagle
  • [16:32:49] * emeb (~ericb@ip68-104-219-168.ph.ph.cox.net) has joined #beagle
  • [16:33:13] <anilp> oh its already there
  • [16:33:35] * anujdeshpande (~Thunderbi@59.99.244.28) has left #beagle
  • [16:34:04] <konrad_1415> Hi there, I have an issue with flashing my BBB (BeagleBone Black). I created an image of the SD card as instructed, but the system is not booting. Can you please tell me what is the problem and how can I solve it?
  • [16:34:24] * Armando (974dad83@gateway/web/freenode/ip.151.77.173.131) has joined #beagle
  • [16:34:33] <av500> hold the boot button when you power on
  • [16:34:47] <Armando> hello to all
  • [16:34:55] * shoragan (~jlu@debian/developer/shoragan) Quit (Remote host closed the connection)
  • [16:35:31] <Armando> can anyone help me?
  • [16:35:40] <av500> depends
  • [16:35:45] * terrys (~terrys@ks-67-239-99-108.dhcp.embarqhsd.net) Quit (Read error: Operation timed out)
  • [16:35:53] <av500> it would help if you asked a non-meta question
  • [16:36:06] <konrad_1415> <@av500> I did hold down the boot button, but only 2 leds are on (not all 4 of them)
  • [16:36:09] <Armando> the my beaglebone black is off and will not turn over
  • [16:36:53] <Armando> The power LED does not light up when I connect the power / usb
  • [16:38:05] <dogrocket> using a pc armando?
  • [16:38:12] <Armando> yes
  • [16:38:30] <dogrocket> sounds like you might have lost control of usb port. reboot
  • [16:38:46] * dob_ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) Quit (Remote host closed the connection)
  • [16:38:54] <Armando> PC and power cord 5v 1A
  • [16:39:12] * dob_ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) has joined #beagle
  • [16:39:15] <dogrocket> hrm... not good
  • [16:39:31] <Armando> I have already rebooted, from linux to windows, the problem remains
  • [16:39:59] <av500> it might be dead
  • [16:40:00] <dogrocket> dont know about that one..., anyone else have ideas
  • [16:40:05] <av500> broken
  • [16:40:36] * NishanthMenon (~nmenon@nat/ti/x-rhozeiuhdqltterz) has joined #beagle
  • [16:40:50] <Armando> the last few commands given were "pacman-S linux-am33x-legacy" and "poweroff"
  • [16:41:03] <dogrocket> wait.. did u power off pc?
  • [16:41:14] <Armando> broken?
  • [16:41:35] <dogrocket> oh.. thats right said you had power
  • [16:41:52] <av500> [17:36] <Armando> The power LED does not light up when I connect the power / usb
  • [16:42:42] <Armando> no..
  • [16:43:01] <Armando> the power led remains down
  • [16:43:02] <anilp> how do i update time on my BBB through terminal..?
  • [16:43:08] <Armando> sorry for my english
  • [16:43:28] * dob_ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) Quit (Ping timeout: 245 seconds)
  • [16:43:44] <dogrocket> i would at least try and unplug everything from bbb and leave it alone for few minutes and try again
  • [16:43:59] <tbr> anilp: using the 'date' command?
  • [16:44:35] <anilp> tbr: n then ...
  • [16:44:43] <av500> konrad_1415: check your sd card
  • [16:44:48] <av500> can you read the boot partition?
  • [16:45:54] <Armando> do not access the boot partition
  • [16:47:29] <konrad_1415> @av500: I did check the SD card. Can you please explain what do you mean by "read the boot partition?"
  • [16:47:40] * santosh5671 (31cfc59c@gateway/web/freenode/ip.49.207.197.156) has joined #beagle
  • [16:47:42] <av500> from your linux/windows pc
  • [16:47:46] <av500> can you see the files?
  • [16:47:47] <av500> MLO
  • [16:47:49] <av500> uboot
  • [16:47:50] <av500> zimage
  • [16:47:53] <av500> or uimage
  • [16:48:07] <konrad_1415> yes, I see all files.
  • [16:48:12] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Quit: Leaving)
  • [16:48:15] <av500> ok
  • [16:48:16] <santosh5671> Hi every one how to change zimage to uImage
  • [16:48:31] * dob_ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) has joined #beagle
  • [16:48:46] * mythos (~mythos@unaffiliated/mythos) Quit (Read error: Connection reset by peer)
  • [16:49:02] <konrad_1415> To be more specific, I see the following: MLO, u-boot and uEnv
  • [16:49:07] <Armando> then it is broken?
  • [16:49:31] <av500> Armando: if no LED goes on at all, yes, something is broken
  • [16:49:41] <av500> either your USB or power cable or the BBB itself
  • [16:49:57] <dogrocket> just plug in usb and see if it comes up..
  • [16:50:34] <Armando> ok thank you
  • [16:50:47] * mythos (~mythos@unaffiliated/mythos) has joined #beagle
  • [16:51:15] <dogrocket> armando you have 5v dc adapter with right plug, might try that
  • [16:51:38] * terrys (~terrys@ks-67-239-99-108.dhcp.embarqhsd.net) has joined #beagle
  • [16:52:25] <anilp> im not able to update opkg
  • [16:52:42] <anilp> its says Failed to download http://www.angstrom-distribution.org/feeds/v2012.12/ipk/eglibc/armv7a-vfp-neon/base/Packages.gz, wget returned 1.
  • [16:52:45] <Armando> i have a 5v dc adapter, but i no understad the right plug, i'm italian
  • [16:53:12] <dogrocket> if it will connect to beaglebone try it
  • [16:53:23] * santosh5671 (31cfc59c@gateway/web/freenode/ip.49.207.197.156) Quit (Ping timeout: 272 seconds)
  • [16:53:24] <dogrocket> 5v -> bbb
  • [16:53:32] * jackmitchell (~Thunderbi@cbnluk-gw0.cambridgebroadband.com) Quit (Read error: Connection reset by peer)
  • [16:53:39] <konrad_1415> <@av500> is it possible that BBB got damaged due to intermission during installation?
  • [16:53:56] <av500> unlikely
  • [16:54:00] <dogrocket> anilp try ping www.yahoo.com
  • [16:54:00] <av500> its not easy to damage it
  • [16:54:07] <av500> people try really hard
  • [16:54:12] * konradoo77 (~debian@81.6.139.17) Quit (Ping timeout: 272 seconds)
  • [16:54:13] <av500> one guy used a hammer
  • [16:54:17] <anilp> huh?
  • [16:54:22] * konradoo77 (~debian@81.6.139.17) has joined #beagle
  • [16:54:31] <av500> he was unhappy and smashed it to bits
  • [16:54:35] <av500> and bytes
  • [16:54:36] <anilp> i just clicked on ur name ..
  • [16:54:38] * jackmitchell (~Thunderbi@cbnluk-gw0.cambridgebroadband.com) has joined #beagle
  • [16:54:41] * c10ud` (~c10ud@emesene/dictator/c10ud) Quit (Remote host closed the connection)
  • [16:54:54] <anilp> pls help though
  • [16:55:02] <dogrocket> anil try to see if you can get to internet on beagle ping yahoo
  • [16:55:15] <anilp> ohh
  • [16:55:16] <anilp> okay
  • [16:55:17] <anilp> :P
  • [16:55:18] * kevinsc (~kevinsc@nat/ti/x-bsbfkenderbyagag) has joined #beagle
  • [16:55:19] <anilp> sorry
  • [16:55:21] <Armando> dogrocket yes, i have the adapter but the power led in down
  • [16:55:23] * kevinsc (~kevinsc@nat/ti/x-bsbfkenderbyagag) has left #beagle
  • [16:55:24] <konrad_1415> hmm...well then, I have no idea why it won't start up...
  • [16:55:30] <dogrocket> no problem
  • [16:55:48] <dogrocket> armando sorry man, sounds like beagle is bad
  • [16:56:53] <Armando> ok thank you for your help, so I have to buy it?
  • [16:57:26] <dogrocket> or take it back.. is it old? warranty still good
  • [16:57:28] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) has joined #beagle
  • [16:58:00] <anilp> its says unknown host www.yahoo.com
  • [16:58:26] <Armando> I bought it on ebay
  • [16:58:28] <dogrocket> anil thats why opkg isnt working, beagle cant get to internet
  • [16:59:05] * lyakh (~lyakh@dslb-094-221-127-243.pools.arcor-ip.net) Quit (Quit: thanks, bye)
  • [17:00:35] <dogrocket> anil you using angstrom?
  • [17:00:50] <ssl_> is there any prepared time sync solution included in the default angstrom distribution?
  • [17:01:07] <konrad_1415> Does anyone have any idea why only 2 LED turn on instead of all 4 during the beggining of installation (the first 3 seconds)? After a while all 4 start flashing properly.
  • [17:01:11] * colonelK (~Thunderbi@84.93.15.207) has joined #beagle
  • [17:01:13] <dogrocket> you mean like date ssl?
  • [17:01:14] <anilp> yea
  • [17:01:26] <ssl_> dogrocket yes
  • [17:01:31] <anilp> how get internet working ?
  • [17:02:13] <dogrocket> anil your gonna have to add gateway and dns to your... cant remember which file
  • [17:03:54] <konrad_1415> *** Does anyone have any idea why only 2 LED turn on instead of all 4 during the beggining of installation (the first 3 seconds)? After a while all 4 start flashing properly.***
  • [17:04:37] <anilp> hhmm ??? wat do i do ne idea .?
  • [17:04:38] <dogrocket> ssl_ theres a program that can get time and date for linux, youll have to download it and maybe compile it.. its called ntp
  • [17:04:41] * jbdatko (~jbdatko@fsf/member/jbdatko) Quit (Ping timeout: 265 seconds)
  • [17:04:44] <dogrocket> Network Time Protocol
  • [17:04:50] <ssl_> i know of ntpdate, but this only works momentarily. i need a solution which syncs the clock like once every hour
  • [17:05:10] <ssl_> also, after a cut power supply
  • [17:05:22] <dogrocket> ntp not capable of that?
  • [17:06:07] <dogrocket> anilp let me see if i can find network settings file for angstrom
  • [17:06:10] <ssl_> i dont know. that ntpdate utility im talking of only does its job after i manually run it
  • [17:06:11] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Ping timeout: 252 seconds)
  • [17:06:14] <jackmitchell> konrad_1415: each LED shows activity of a different function, e.g. cpu heartbeat, mmc etc, so they are not all just "turned on" they actually represent something happening
  • [17:06:35] <dogrocket> ssl oh i think ntp will do more than that
  • [17:06:37] <jackmitchell> ssl_: create a script that runs ntpdate once an hour and on boot
  • [17:06:48] * divine (~divine@69.198.165.132) has joined #beaglebone
  • [17:06:58] * Shadyman (~matthew@unaffiliated/shadyman) has joined #beagle
  • [17:06:58] <jackmitchell> ssl_: google will show you how
  • [17:06:59] * armando_ (~armando@151.77.173.131) has joined #beagle
  • [17:07:08] <ssl_> ok thanks
  • [17:07:10] * Armando (974dad83@gateway/web/freenode/ip.151.77.173.131) Quit (Quit: Page closed)
  • [17:07:23] <anilp> okay
  • [17:08:36] <dogrocket> ssl use cron
  • [17:09:57] <ssl_> dogrocket thats what im looking into right now, and there already is a ntp job in there
  • [17:10:03] * RichardPotthoff (~richardpo@c-68-38-232-139.hsd1.nj.comcast.net) Quit ()
  • [17:10:10] <ssl_> but it seems it needs some configuration before woking
  • [17:10:17] <ssl_> *working
  • [17:10:45] <konrad_1415> jackmitchell: OK, I get it. However, I prepared SD card image (debian 7.2), I hold down the boot button, 2 LED came up and after about 15 sec. 4 LED started flashing. I let go of the button and waited about 2 hrs and all 4 LED never stayed on (they were constantly flashing even after 2 hrs).
  • [17:11:33] <jackmitchell> konrad_1415: oh right, so you're talking about the eMMC flashing process, in that case I have never used it so I have no idea, sorry.
  • [17:11:44] <dogrocket> check the net for configuration and use of ntp
  • [17:11:57] * LordDVG (~LordDVG@unaffiliated/lorddvg) Quit (Remote host closed the connection)
  • [17:12:13] <konrad_1415> jackmitchell, thanks anyway, man.
  • [17:12:25] <dogrocket> anilp you need to put dns_nameserver 8.8.8.8 in /etc/network/interfaces
  • [17:12:32] <anilp> alryt my internet is working
  • [17:12:33] <anilp> :P
  • [17:12:36] <anilp> thanx
  • [17:12:39] <dogrocket> lol
  • [17:12:40] <jackmitchell> konrad_1415: I know it can take _hours_
  • [17:13:10] <anilp> i am able to ping
  • [17:13:19] <konrad_1415> jackmitchell: could it take longer than 2-3 hrs
  • [17:13:22] <anilp> bt still not able to update
  • [17:13:22] <dogrocket> awesome.. opkg should work
  • [17:13:42] <jackmitchell> konrad_1415: possibly, have you read the wiki page about it, that will probably tell you some mor einformation
  • [17:13:43] <dogrocket> not
  • [17:13:45] <anilp> Failed to download http://www.angstrom-distribution.org/feeds/v2012.12/ipk/eglibc/armv7a-vfp-neon/perl/Packages.gz, wget returned 1.
  • [17:14:42] <konrad_1415> jackmitchell: yeah, I did read wiki and many other articles. Still can't get pass this problem tho. Well, thanks for your help! Much appreciated.
  • [17:15:00] <jackmitchell> konrad_1415: At that point, just sit back for about 45 minutes and watch the flashing LEDs until they all come on solid. Mission accomplished.
  • [17:15:39] <jackmitchell> so apparently it should take about 45 minutes; I would re-download the latest flashing script and try again
  • [17:15:48] <jackmitchell> konrad_1415: http://www.crashcourse.ca/wiki/index.php/BBB_software_update_process
  • [17:15:51] <dogrocket> anil try opkg list
  • [17:16:13] <konrad_1415> That's the problem - they don't come on solid, they keep flashing even after waiting over 45 min...
  • [17:16:44] <konrad_1415> jackmitchell: That's the problem - they don't come on solid, they keep flashing even after waiting over 45 min...
  • [17:16:54] * kuldeepdhaka (~kuldeepdh@unaffiliated/kuldeepdhaka) Quit (Ping timeout: 252 seconds)
  • [17:17:23] <jackmitchell> konrad_1415: I would double check everything downloaded correctly, reflash the uSD card and just try again
  • [17:18:39] * dogrocket (~dogrocket@pool-71-180-22-73.tampfl.fios.verizon.net) Quit ()
  • [17:20:15] * Bryanstein (~Bryanstei@shellium/admin/bryanstein) Quit (Ping timeout: 272 seconds)
  • [17:20:19] <anilp> yup it shows a lot of stuff
  • [17:21:48] <konrad_1415> jackmitchell: will have to double check it then. Can you advise of any good source where eMMC devian program can be found?
  • [17:22:00] * Bryanstein (~Bryanstei@shellium/admin/bryanstein) has joined #beagle
  • [17:22:31] * Andrew__ (~andrew@103.14.185.15) has joined #beagle
  • [17:24:03] * kiilo (~kiilo@77-56-99-130.dclient.hispeed.ch) Quit (Quit: ciao)
  • [17:25:49] * bkearns (~bkearns@216-75-239-130.static.wiline.com) has joined #beagle
  • [17:27:05] <jackmitchell> konrad_1415: sorry, I don't know
  • [17:27:07] * jpirko (~jirka@ip-94-113-120-213.net.upcbroadband.cz) Quit (Quit: Leaving)
  • [17:28:33] * shaunbaker (~shaunbake@brick-lane.lbi.co.uk) Quit (Remote host closed the connection)
  • [17:28:44] * trigpoint_n9__ (~trigpoint@genld-218-241.t-mobile.co.uk) Quit (Ping timeout: 252 seconds)
  • [17:28:51] * Shadyman (~matthew@unaffiliated/shadyman) Quit (Quit: Leaving.)
  • [17:29:00] * Bryanstein (~Bryanstei@shellium/admin/bryanstein) has joined #beaglebone
  • [17:33:18] * Andrew__ (~andrew@103.14.185.15) Quit (Quit: Colloquy for iPad - http://colloquy.mobi)
  • [17:38:15] * Andrew__ (~andrew@103.14.185.15) has joined #beagle
  • [17:38:20] * NulL` (~bleh1@92.39.201.91) has joined #beagle
  • [17:38:23] * divine (~divine@69.198.165.132) Quit (Quit: Lost terminal)
  • [17:42:52] * kazzam (7076c159@gateway/web/freenode/ip.112.118.193.89) has joined #beagle
  • [17:43:01] * kazzam (7076c159@gateway/web/freenode/ip.112.118.193.89) has left #beagle
  • [17:49:25] * trigpoint_n9__ (~trigpoint@054159aa.skybroadband.com) has joined #beagle
  • [17:51:07] * RichardPotthoff (~richardpo@c-68-38-232-139.hsd1.nj.comcast.net) has joined #beagle
  • [17:51:57] * vinifr (~vini@177.98.169.10) Quit (Quit: Saindo)
  • [17:54:53] * jackmitchell (~Thunderbi@cbnluk-gw0.cambridgebroadband.com) Quit (Quit: jackmitchell)
  • [17:56:29] * scrp3l (~scrp3l@178.63.197.92) Quit (Quit: Leaving)
  • [17:57:00] * behanw (~behanw@184.66.11.74) has joined #beagle
  • [17:58:20] * zeroem (~dhamilton@nat-225.fw1.la.vclk.net) has joined #beagle
  • [17:59:32] * mromero (~mromero@69.6.172.82) Quit (Remote host closed the connection)
  • [18:01:01] * zeroem (~dhamilton@nat-225.fw1.la.vclk.net) Quit (Client Quit)
  • [18:01:16] * zeroem (~dhamilton@nat-225.fw1.la.vclk.net) has joined #beagle
  • [18:04:19] * zeroem (~dhamilton@nat-225.fw1.la.vclk.net) Quit (Client Quit)
  • [18:04:20] * bizulk (~sli@h67.cornut.fr) Quit (Quit: Leaving.)
  • [18:04:38] * zeroem (~dhamilton@nat-225.fw1.la.vclk.net) has joined #beagle
  • [18:06:09] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit (Remote host closed the connection)
  • [18:06:38] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) has joined #beagle
  • [18:07:33] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [18:07:34] * Mode-M (~Null@109.125.72.232.dynamic.cablesurf.de) has joined #beagle
  • [18:07:43] * Andrew__ (~andrew@103.14.185.15) Quit (Quit: Colloquy for iPad - http://colloquy.mobi)
  • [18:09:19] * louiz920 (~a0272879@nat/ti/x-dzxucapigsyhzqgj) has joined #beagle
  • [18:10:03] * mrjazzcat (~mrjazzcat@c-24-8-176-66.hsd1.co.comcast.net) has joined #beagle
  • [18:11:19] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit (Ping timeout: 260 seconds)
  • [18:13:29] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) has joined #beagle
  • [18:16:42] * gflow (~gflow@nyc-333.nycbit.com) Quit (Ping timeout: 265 seconds)
  • [18:17:38] * shaunbaker (~shaunbake@brick-lane.lbi.co.uk) has joined #beagle
  • [18:22:58] * rob_w (~rob@ppp-93-104-4-40.dynamic.mnet-online.de) has joined #beagle
  • [18:22:59] * rob_w (~rob@ppp-93-104-4-40.dynamic.mnet-online.de) Quit (Changing host)
  • [18:22:59] * rob_w (~rob@unaffiliated/rob-w/x-1112029) has joined #beagle
  • [18:24:32] * sgriepentrog (~sgriepent@nat/digium/x-vgdasbbjakaqmnhu) has joined #beagle
  • [18:27:13] <sgriepentrog> *newb with problem alert* I have a black board that suddenly won't power up. When I plug in 5v, the light blinks, then nothing. Screwed, am I?
  • [18:27:43] * kevinsc1 (~kevinsc@nat/ti/x-mqfzthecehvmhiwx) has joined #beagle
  • [18:27:43] * wiznerd (~wiznerd@192.227.251.220) has joined #beagle
  • [18:30:21] * dob_ (~dob_@HSI-KBW-095-208-170-072.hsi5.kabel-badenwuerttemberg.de) Quit (Remote host closed the connection)
  • [18:30:39] <N2TOH> sgriepentrog, if you use a uHDMI cable try readjusting it, or if you use an external SD card try removing it.
  • [18:31:09] * bearsh|work (~quassel@189-92.77-83.cust.bluewin.ch) Quit (Read error: Operation timed out)
  • [18:32:16] * wiznerd (~wiznerd@192.227.251.220) Quit (Ping timeout: 260 seconds)
  • [18:32:17] <sgriepentrog> I was originally using an HDMI cable with no SD card when it stopped working.
  • [18:32:22] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) Quit (Ping timeout: 272 seconds)
  • [18:32:49] <sgriepentrog> I've tried every combination I can think of, including no HDMI, SD with valid boot on it, etc. Blue light next to power jack blinks once briefly, then nothing.
  • [18:33:14] <sgriepentrog> Just wanted to get an expert opinion that it's fried before I buy another one.
  • [18:33:20] <sgriepentrog> And a case this time.
  • [18:34:25] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) has joined #beagle
  • [18:34:34] <sgriepentrog> Was hoping for maybe a hit this button to factory reset type scenario to save the day...
  • [18:38:01] * shaunbaker (~shaunbake@brick-lane.lbi.co.uk) Quit (Remote host closed the connection)
  • [18:39:56] * sellout- (~Adium@161.98.9.235) Quit (Quit: Leaving.)
  • [18:42:46] <johnwalkr> sgriepentrog: yeah i fried 2 like that
  • [18:43:07] * _chase_ (~a0271661@nat/ti/x-jxwgvpwyqzlcmfqa) Quit (Remote host closed the connection)
  • [18:43:14] <johnwalkr> very breif blink right?
  • [18:43:20] <sgriepentrog> yes, very brief
  • [18:43:31] * _chase_ (~a0271661@nat/ti/x-klslqedvswasqour) has joined #beagle
  • [18:43:41] <johnwalkr> https://groups.google.com/forum/#!topic/beagleboard/l-bap8sB4rw
  • [18:43:52] <sgriepentrog> and also blinks the same if I hit power button, but no other lights.
  • [18:44:24] * guntha__ (~guntha@nyc-333.nycbit.com) has joined #beagle
  • [18:44:26] * guntha__ (~guntha@nyc-333.nycbit.com) Quit (Read error: Connection reset by peer)
  • [18:44:57] <johnwalkr> probably the PMIC, maybe you can RMA it. IN my case it was my own fault for overvoltage on the input pins
  • [18:45:07] <johnwalkr> so I didn???t
  • [18:45:17] <sgriepentrog> pmic?
  • [18:46:00] <johnwalkr> it???s the chip that regulates power, the link above has more detail
  • [18:46:26] <sgriepentrog> checking it out thanks
  • [18:50:33] * konrad_1415 (59495f20@gateway/web/freenode/ip.89.73.95.32) Quit (Ping timeout: 272 seconds)
  • [18:51:23] * colonelK (~Thunderbi@84.93.15.207) Quit (Quit: colonelK)
  • [18:53:35] * uv (~uv@94-21-100-159.pool.digikabel.hu) has joined #beagle
  • [18:54:25] * foundatron (~textual@unaffiliated/foundatron) has joined #beagle
  • [18:54:45] * rob_w (~rob@unaffiliated/rob-w/x-1112029) Quit (Read error: Connection reset by peer)
  • [18:56:05] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit ()
  • [19:03:04] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [19:03:40] * anilp (4a400832@gateway/web/freenode/ip.74.64.8.50) Quit (Quit: Page closed)
  • [19:03:59] * LordDVG (~LordDVG@unaffiliated/lorddvg) has joined #beagle
  • [19:10:05] * Calc_ (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [19:13:05] * mromero (~mromero@69.6.172.82) has joined #beagle
  • [19:13:53] * Calc (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Ping timeout: 272 seconds)
  • [19:15:14] * johnwalkr (~walkerj@net020.mech.tohoku.ac.jp) Quit (Quit: johnwalkr)
  • [19:16:58] * trigpoint_n9__ (~trigpoint@054159aa.skybroadband.com) Quit (Remote host closed the connection)
  • [19:17:11] * trigpoint_n9__ (~trigpoint@054159aa.skybroadband.com) has joined #beagle
  • [19:17:11] * legov (~jonathan@friedpancakes.com) has joined #beaglebone
  • [19:17:11] * legov (~jonathan@friedpancakes.com) has joined #beagleboard
  • [19:22:05] <armando_> does anyone know how to break the BBB?
  • [19:22:25] * armando_ (~armando@151.77.173.131) has left #beagle
  • [19:22:31] <prpplague> hehe
  • [19:22:46] * armando (~armando@151.77.173.131) has joined #beagle
  • [19:22:56] <armando> does anyone know how to break the BBB?
  • [19:23:09] <prpplague> armando: yes i do
  • [19:23:21] <prpplague> armando: plug a 220 mains into the expansion header
  • [19:23:29] <armando> you can explain it to me?
  • [19:23:31] <prpplague> armando: that will certainly break it
  • [19:23:40] <armando> thanks
  • [19:23:54] <prpplague> armando: why are you trying to break a BBB?
  • [19:24:17] <ds2> I presonally like chisels under the bga
  • [19:24:22] <armando> I had connected the LCD screen of 4dsystems
  • [19:25:45] <armando> prpplague is broken and I do not understand how
  • [19:26:13] <prpplague> armando: if you plug the lcd panel cape in backwards then powered on the board, it would damage the bbb
  • [19:26:18] * flo_lap (~fuchs@sign-4db604c2.pool.mediaWays.net) has joined #beagle
  • [19:26:18] * flo_lap (~fuchs@sign-4db604c2.pool.mediaWays.net) Quit (Changing host)
  • [19:26:18] * flo_lap (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [19:26:44] * flo_lap is now known as florian
  • [19:28:01] <armando> the screen was working with angstrom, then I started arch linux, I gave the command
  • [19:28:01] <armando> "pacman-S linux-am33x-legacy, then eventually poweroff, and after not working anymore
  • [19:28:40] <armando> I was working with the usb cable
  • [19:28:43] <ctag> Can anyone help me find information on the power usage of a Beagleboard-xm
  • [19:30:57] * stahl (~stahl@178-83-160-218.dynamic.hispeed.ch) has joined #beaglebone
  • [19:31:39] <ctag> I'm looking to run the BB-xM with a small screen, but can't seem to find what requirements I'd have for a battery.
  • [19:32:03] * zangdar64 (~zangdar64@local.paul-lacoste.fr) has joined #beagle
  • [19:32:05] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) Quit (Read error: Connection reset by peer)
  • [19:32:20] * JarrettV (~Jarrett@99.4.112.26) has joined #beagle
  • [19:33:57] * jbdatko (~jbdatko@209.133.117.5) has joined #beagle
  • [19:33:57] * jbdatko (~jbdatko@209.133.117.5) Quit (Changing host)
  • [19:33:57] * jbdatko (~jbdatko@fsf/member/jbdatko) has joined #beagle
  • [19:34:29] <zangdar64> Hi! (sorry for my bad english) smd know if tps65217 status reg is avaible in sysfs to get AC power status)
  • [19:37:22] <armando> prpplague when I put the power and hit the pulsed power on the flatscreen lcd, the power LED lights on and off in less than a second
  • [19:38:32] * mythos (~mythos@unaffiliated/mythos) Quit (Ping timeout: 252 seconds)
  • [19:40:37] * zangdar64_ (~zangdar64@local.paul-lacoste.fr) has joined #beagle
  • [19:41:46] <armando> ?????????????
  • [19:43:07] * zangdar64 (~zangdar64@local.paul-lacoste.fr) Quit (Ping timeout: 252 seconds)
  • [19:43:57] <prpplague> armando: maybe contact the company you purchased the lcd from for support
  • [19:44:16] <tbr> armando: sounds like you replaced the kernel you were running with some distribution kernel
  • [19:44:56] <JarrettV> anyone try out the new debian distros?
  • [19:45:39] * woglinde (~henning@e179068234.adsl.alicedsl.de) has joined #beagle
  • [19:46:18] <armando> tbr i have installed arch linux on my BBB, pacman -S linux-amx335x-legacy, poweroff, and broken
  • [19:46:55] <Wizzup> sounds like archlinux alright
  • [19:47:10] <tbr> armando: why did you think, that was a good idea to install a different kernel?
  • [19:48:07] <armando> for operation of the LCD screen
  • [19:48:14] * shekhar (67f66a0a@gateway/web/freenode/session) has joined #beagle
  • [19:48:34] <tbr> armando: but you said that it worked well _before_ you installed it?
  • [19:48:44] * rsalveti (~rsalveti@unaffiliated/rsalveti) Quit (Ping timeout: 252 seconds)
  • [19:48:47] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) has joined #beagle
  • [19:48:52] * shekhar (67f66a0a@gateway/web/freenode/session) Quit (Changing host)
  • [19:48:52] * shekhar (67f66a0a@gateway/web/freenode/ip.103.246.106.10) has joined #beagle
  • [19:49:22] * shekhar (67f66a0a@gateway/web/freenode/ip.103.246.106.10) has left #beagle
  • [19:49:31] * VirG (~VirGin@c-71-204-168-187.hsd1.ca.comcast.net) Quit (Read error: Connection reset by peer)
  • [19:50:03] <armando> angstrom with the LCD screen worked, but it did not work with arch linux
  • [19:50:28] <tbr> armando: then use the kernel, that angstrom uses
  • [19:51:23] <armando> but I work with arch linux, which is why I wanted to configure the screen
  • [19:51:43] * SoCo_cpp_ (~soco@gateway/tor-sasl/sococpp/x-93321146) Quit (Quit: Leaving)
  • [19:51:44] * VirG (~VirGin@c-71-204-168-187.hsd1.ca.comcast.net) has joined #beagle
  • [19:53:09] * kevinsc1 (~kevinsc@nat/ti/x-mqfzthecehvmhiwx) Quit (Quit: Leaving.)
  • [19:55:37] * Maxz (~felipe@pc-100-145-239-201.cm.vtr.net) has joined #beagle
  • [19:55:57] * rsalveti (~rsalveti@unaffiliated/rsalveti) has joined #beagle
  • [20:00:11] * armando (~armando@151.77.173.131) Quit (Quit: Sto andando via)
  • [20:00:33] * bkearns (~bkearns@216-75-239-130.static.wiline.com) Quit (Quit: Leaving.)
  • [20:03:08] * etch (~etch@pool-71-184-94-122.bstnma.fios.verizon.net) has joined #beagle
  • [20:03:49] * falstaff_ (~quassel@62-12-195-129.pool.cyberlink.ch) has joined #beaglebone
  • [20:03:49] * falstaff_ (~quassel@62-12-195-129.pool.cyberlink.ch) has joined #beagle
  • [20:04:38] * falstaff (~quassel@62-12-246-245.pool.cyberlink.ch) Quit (Ping timeout: 246 seconds)
  • [20:08:15] * johnwalkr (~walkerj@p1051-ipngn1101aobadori.miyagi.ocn.ne.jp) has joined #beagle
  • [20:14:01] * honschu_ (~honschu@shackspace/j4fun) Quit (Read error: Operation timed out)
  • [20:16:26] * mythos (~mythos@unaffiliated/mythos) has joined #beagle
  • [20:16:40] * honschu (~honschu@p549EA3E6.dip0.t-ipconnect.de) has joined #beagle
  • [20:16:40] * honschu (~honschu@p549EA3E6.dip0.t-ipconnect.de) Quit (Changing host)
  • [20:16:40] * honschu (~honschu@shackspace/j4fun) has joined #beagle
  • [20:17:00] <corrosion> Hey guys I'm trying to connect Marvell SDIO wifi chip to mmc3 on BBB, but besides the chip being detected nothing else works - FW download fails. And if I connect the chip to mmc1 everything works fine. What is different between mmc1 and mmc3?
  • [20:18:52] * uv (~uv@94-21-100-159.pool.digikabel.hu) Quit (Remote host closed the connection)
  • [20:21:39] * sellout- (~Adium@65.101.242.214) has joined #beagle
  • [20:22:15] <ds2> what does the TRM say?
  • [20:24:54] * SoCo_cpp_ (~soco@gateway/tor-sasl/sococpp/x-93321146) has joined #beagle
  • [20:26:20] * sellout- (~Adium@65.101.242.214) Quit (Client Quit)
  • [20:26:45] <etch> i believe the TRM says to check with #beagle :P
  • [20:26:58] <mdp> heh
  • [20:28:57] * bkearns (~bkearns@216-75-239-130.static.wiline.com) has joined #beagle
  • [20:32:40] * mythos (~mythos@unaffiliated/mythos) Quit (Quit: Verlassend)
  • [20:32:49] <ds2> I see
  • [20:32:54] * sellout- (~Adium@65.101.242.214) has joined #beagle
  • [20:32:55] <ds2> prehaps you need an updated TRM.
  • [20:32:59] <ds2> read that first.
  • [20:33:00] <ds2> :D
  • [20:33:35] <JarrettV> jkridner, good to see some activity on bonescript
  • [20:34:59] * wiznerd (~wiznerd@192.227.251.220) has joined #beagle
  • [20:40:37] * jbdatko (~jbdatko@fsf/member/jbdatko) Quit (Ping timeout: 248 seconds)
  • [20:47:02] * sellout- (~Adium@65.101.242.214) Quit (Quit: Leaving.)
  • [20:47:04] * alan_o (~alan@c-76-29-154-88.hsd1.fl.comcast.net) has joined #beagle
  • [20:48:07] * vagrantc (~vagrant@freegeek/vagrantc) has joined #beagle
  • [20:49:16] <zangdar64_> ./quit
  • [20:49:24] * zangdar64_ (~zangdar64@local.paul-lacoste.fr) Quit (Quit: Quitte)
  • [21:00:21] * mythos (~mythos@unaffiliated/mythos) has joined #beagle
  • [21:00:50] * sellout- (~Adium@65.101.242.214) has joined #beagle
  • [21:02:48] * sellout- (~Adium@65.101.242.214) Quit (Read error: Connection reset by peer)
  • [21:02:54] * sellout-1 (~Adium@65.101.242.214) has joined #beagle
  • [21:08:29] * ssvb (~ssvb@212.16.98.80) has joined #beagle
  • [21:09:54] * krajo1 (~krajo1@ip4-95-82-142-152.cust.nbox.cz) has joined #beagle
  • [21:10:13] * veremit (~veremit@unaffiliated/veremit) has joined #beagle
  • [21:11:18] * shaunbaker (~shaunbake@97e69e6b.skybroadband.com) has joined #beagle
  • [21:12:23] * NulL` (~bleh1@92.39.201.91) Quit (Read error: Connection reset by peer)
  • [21:13:16] * NulL` (~bleh1@92.39.201.91) has joined #beagle
  • [21:17:45] * rcn-ee (~voodoo@64.77.213.245) has joined #beagle
  • [21:35:47] * mythos (~mythos@unaffiliated/mythos) Quit (Remote host closed the connection)
  • [21:49:42] * prpplague (~danders@rrcs-97-77-26-26.sw.biz.rr.com) Quit (Quit: Leaving)
  • [21:53:47] * johnwalkr (~walkerj@p1051-ipngn1101aobadori.miyagi.ocn.ne.jp) Quit (Quit: johnwalkr)
  • [21:54:10] * kevinsc (~kevinsc@nat/ti/x-dlzvqwowatuwizaj) has joined #beagle
  • [21:54:20] * yemartin (~yemartin@y247212.dynamic.ppp.asahi-net.or.jp) has joined #beagle
  • [21:55:10] * johnwalkr (~walkerj@p1051-ipngn1101aobadori.miyagi.ocn.ne.jp) has joined #beagle
  • [21:56:47] * shaunbaker (~shaunbake@97e69e6b.skybroadband.com) Quit (Remote host closed the connection)
  • [21:57:41] * veremit (~veremit@unaffiliated/veremit) Quit (Ping timeout: 252 seconds)
  • [21:59:39] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) has joined #beagle
  • [22:00:26] * yemartin (~yemartin@y247212.dynamic.ppp.asahi-net.or.jp) has left #beagle
  • [22:00:35] <JarrettV> got a beaglebone white today... very classy and 2012
  • [22:00:51] <JarrettV> 25 dollars was a good deal
  • [22:01:39] * zer0s (~hizuzu@c-98-198-88-222.hsd1.tx.comcast.net) has joined #beagle
  • [22:02:03] <JarrettV> anyone with experience kernel code from aosp running in debian?
  • [22:02:04] * veremit (~veremit@unaffiliated/veremit) has joined #beagle
  • [22:02:13] * SoCo_cpp_ (~soco@gateway/tor-sasl/sococpp/x-93321146) Quit (Quit: Leaving)
  • [22:02:30] <JarrettV> any TI guys here?
  • [22:03:11] <veremit> try the TI forums JarrettV
  • [22:03:35] <JarrettV> invite only :(
  • [22:03:59] <JarrettV> guess i could auth nick
  • [22:04:19] <veremit> I've registered on the TI forums, and had replies from TI
  • [22:04:27] <veremit> but I don't imagie they visit IRC
  • [22:04:51] <veremit> what is it you're having problems with?
  • [22:05:19] <JarrettV> i'm doing a fun project with i2c i2s with a class-d amp
  • [22:05:30] <JarrettV> heard of nexus Q?
  • [22:05:33] <veremit> oo nice
  • [22:05:35] <veremit> nope
  • [22:05:54] <JarrettV> it has a nice amp i want to hook into beaglebone
  • [22:06:22] <JarrettV> although the bbb is a downgrade from it's original soc
  • [22:07:19] <veremit> ah I see
  • [22:07:29] <veremit> I stumbled across Volumio recently
  • [22:07:31] <veremit> another interesting project
  • [22:07:48] * mythos (~mythos@unaffiliated/mythos) has joined #beagle
  • [22:07:58] <JarrettV> oh yea, would like to try it on the bbb
  • [22:08:02] <JarrettV> http://wiki.redmountainmakers.org/index.php?title=Project_Digital_Audio
  • [22:08:07] * darknighte_ (uid23369@gateway/web/irccloud.com/x-jsvuxpbrcxymykzt) Quit (Quit: Connection closed for inactivity)
  • [22:08:36] <veremit> I'm looking at running it on my wandboard :) onboard codec .. no idea how good that one is though
  • [22:09:12] <JarrettV> external amp or headphones?
  • [22:09:27] <veremit> dunno yet .. not got an audio system figured
  • [22:09:43] <veremit> got a lovely 2x-100w class A-B mate built :)
  • [22:09:54] * Tamnir (~yemartin@y247212.dynamic.ppp.asahi-net.or.jp) has joined #beagle
  • [22:10:08] <veremit> but boss is building 2x 80W class-D
  • [22:10:09] * Tamnir (~yemartin@y247212.dynamic.ppp.asahi-net.or.jp) has left #beagle
  • [22:10:48] * trigpoint_n9__ (~trigpoint@054159aa.skybroadband.com) Quit (Remote host closed the connection)
  • [22:10:57] * Maxz (~felipe@pc-100-145-239-201.cm.vtr.net) Quit (Quit: Textual IRC Client: www.textualapp.com)
  • [22:12:59] * Mode-M (~Null@109.125.72.232.dynamic.cablesurf.de) Quit (Read error: Operation timed out)
  • [22:14:18] * NulL` (~bleh1@92.39.201.91) Quit (Ping timeout: 276 seconds)
  • [22:14:24] <JarrettV> nice, would love to build one like that
  • [22:15:21] * yemartin (~yemartin@y247212.dynamic.ppp.asahi-net.or.jp) has joined #beagle
  • [22:15:40] <veremit> mostly home-designed I understand
  • [22:18:56] * corrosion (~corrosion@pool-71-184-94-122.bstnma.fios.verizon.net) Quit ()
  • [22:19:30] * LordDVG (~LordDVG@unaffiliated/lorddvg) Quit (Remote host closed the connection)
  • [22:20:17] <JarrettV> yea, i like the TI chips wish it was more than a hobby
  • [22:20:43] <JarrettV> https://lh3.googleusercontent.com/-gBjbu6eNDr0/Utmq1u0Ax_I/AAAAAAAAQOg/s7bLJvVx6nY/w1165-h874-no/IMG_20140117_161221.jpg
  • [22:21:06] * CalcMan (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [22:21:35] <veremit> luuurvely :)
  • [22:21:42] <JarrettV> don't laugh at my soldering skills
  • [22:22:01] <veremit> ah I've seen worse
  • [22:22:20] * yemartin (~yemartin@y247212.dynamic.ppp.asahi-net.or.jp) Quit ()
  • [22:22:52] <JarrettV> damn tiny pads
  • [22:23:03] * kevinsc1 (~kevinsc@nat/ti/x-qcmiaqcrtvghconf) has joined #beagle
  • [22:23:36] <JarrettV> veremit, picture of your loudspeakers?
  • [22:23:47] <veremit> don't have any here at present
  • [22:23:55] <veremit> thats a project I need to start on
  • [22:24:17] * mromero (~mromero@69.6.172.82) Quit (Remote host closed the connection)
  • [22:24:38] <veremit> these are the ones my boss built last year .. http://www.linkwitzlab.com/Pluto/intro.htm
  • [22:24:38] * Calc_ (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Ping timeout: 252 seconds)
  • [22:25:08] * kevinsc (~kevinsc@nat/ti/x-dlzvqwowatuwizaj) Quit (Ping timeout: 260 seconds)
  • [22:26:32] * Jarrett_ (~Jarrett@99.4.112.26) has joined #beagle
  • [22:26:38] <veremit> wb
  • [22:26:45] <veremit> what designs you been using?
  • [22:27:05] * sgriepentrog (~sgriepent@nat/digium/x-vgdasbbjakaqmnhu) has left #beagle
  • [22:27:10] <Jarrett_> for the amp project?
  • [22:27:23] <veremit> speakers .. presume the TI app note governs that chip
  • [22:27:52] <Jarrett_> well, i have speakers I made in 1999 shamrock design
  • [22:28:20] <Jarrett_> they aren't in use at the moment :(
  • [22:28:28] <veremit> always interested in a good moderate-power clean even speaker design :)
  • [22:29:58] * kevinsc1 (~kevinsc@nat/ti/x-qcmiaqcrtvghconf) Quit (Ping timeout: 265 seconds)
  • [22:30:01] * yemartin (~yemartin@y247212.dynamic.ppp.asahi-net.or.jp) has joined #beagle
  • [22:30:03] <Jarrett_> they have aged well
  • [22:30:47] <Jarrett_> https://lh5.googleusercontent.com/-W_yRzv5UmwQ/Utmu27vtW-I/AAAAAAAAQPU/AieXD74FW3Y/w656-h874-no/IMG_20140117_162923.jpg
  • [22:30:47] <ssl_> hi veremit. i succeded with the devicetree file, got my lcd working fine. but still, some applications complain about not beeing able to open the display, for instance x11vnc, which i'd really like to use
  • [22:31:15] <veremit> hmm interesting
  • [22:31:19] <Jarrett_> veremit: this rare 1" MDF
  • [22:31:45] <veremit> rare? ah... 18mm is quite thick yes ..
  • [22:32:01] <veremit> needs to be rigid though
  • [22:32:04] * dgerlach (~dave@nat/ti/x-gqzkyvnnpujorrmz) Quit (Quit: Leaving.)
  • [22:32:11] <veremit> those look pretty sweet
  • [22:32:24] <Jarrett_> lots of braching, i remember the glue 15 years ago
  • [22:32:29] <ssl_> do you have an idea on what I could try to get it working?
  • [22:32:31] <veremit> hehe
  • [22:32:53] <veremit> ssl_... I'da thought if it comes up .. it'd just be an X display which you can connect to
  • [22:32:57] <veremit> its on sockets afaik
  • [22:33:20] * sellout-1 (~Adium@65.101.242.214) Quit (Quit: Leaving.)
  • [22:33:27] <Jarrett_> my brother has a matching pair and center channel + surrounds all shamrock design
  • [22:33:44] <veremit> just lookin up designs
  • [22:34:52] <N2TOH> http://pansenti.wordpress.com/2013/06/01/powering-a-beaglebone-black-with-a-single-cell-li-ion-or-lipo-battery-yes-it-can-be-done-but-there-are-issues/
  • [22:36:34] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit ()
  • [22:37:43] * shaunbaker (~shaunbake@97e69e6b.skybroadband.com) has joined #beagle
  • [22:38:05] <ssl_> is it possible that :0.0 is the wrong display numer?
  • [22:38:10] <ssl_> how to find out?
  • [22:38:25] <veremit> ssl_ .. should be standard x11vnc setup really
  • [22:38:58] * vmayoral (~vmayoral@ppp-72-217.15-151.iol.it) has joined #beagle
  • [22:39:11] <ssl_> i did export DISPLAY=:0.0 before
  • [22:39:21] <ssl_> didn't change anything really
  • [22:41:37] * bkearns (~bkearns@216-75-239-130.static.wiline.com) Quit (Quit: Leaving.)
  • [22:41:56] * bkearns (~bkearns@216-75-239-130.static.wiline.com) has joined #beagle
  • [22:43:08] <ssl_> well, i have another issue, propably related
  • [22:43:47] <ssl_> i added to my uEnv.txt file this: capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN capemgr.enable_partno=LCD-G104
  • [22:44:11] <ssl_> which apparently works, because i get a picture in the lcd
  • [22:44:35] <veremit> ofc
  • [22:44:44] <ssl_> but then, everytime i boot the BBB, it waits for 60 seconds
  • [22:45:20] <ssl_> dmesg tells me:
  • [22:45:25] <ssl_> [ 61.500442] bone-capemgr bone_capemgr.8: failed to load firmware 'LCD-G104-00A0.dtbo' [ 61.508674] bone-capemgr bone_capemgr.8: loader: retrying slot-7 LCD-G104:00A0 (prio 0)
  • [22:45:56] <ssl_> anything wrong with my uEnv.txt line?
  • [22:46:15] <veremit> nope
  • [22:46:28] <veremit> but you don't have a firmware file for your 'cape'
  • [22:46:44] * johnwalkr (~walkerj@p1051-ipngn1101aobadori.miyagi.ocn.ne.jp) Quit (Quit: johnwalkr)
  • [22:47:06] <ssl_> sure i do, its /lib/firmware/LCD-G104-00A0.dtbo
  • [22:47:44] <veremit> then somethign is wrong lol
  • [22:47:56] <veremit> http://papermint-designs.com/community/node/331 is a good resource on capes
  • [22:48:24] <ssl_> the strange thing is, at the second try, it works
  • [22:51:43] * vmayoral (~vmayoral@ppp-72-217.15-151.iol.it) Quit (Quit: vmayoral)
  • [22:52:15] * mnt_real (~sinan@unaffiliated/mnt-real/x-5039713) has joined #beagle
  • [22:52:17] <ssl_> i also get a lot of these messages in dmesg: [ 91.534195] [drm:drm_ioctl], pid=242, cmd=0xc01864b1, nr=0xb1, dev 0xe200, auth=1
  • [22:52:25] * jbdatko (~jbdatko@fsf/member/jbdatko) has joined #beagle
  • [22:54:22] * vmayoral (~vmayoral@ppp-72-217.15-151.iol.it) has joined #beagle
  • [22:57:23] <veremit> rcn-ee .. you there?
  • [22:57:41] <rcn-ee> never.. ;)
  • [22:57:47] <rcn-ee> what's up
  • [22:57:47] * etch (~etch@pool-71-184-94-122.bstnma.fios.verizon.net) has left #beagle
  • [22:57:52] <veremit> can you stop by #wandboard a sec?
  • [22:58:05] * jbdatko (~jbdatko@fsf/member/jbdatko) Quit (Ping timeout: 272 seconds)
  • [22:58:16] <rcn-ee> sure
  • [22:58:20] <veremit> trying to figure a kernel thingy
  • [23:01:01] * bfederau (~quassel@service.basyskom.com) Quit (Remote host closed the connection)
  • [23:01:17] * bfederau (~quassel@service.basyskom.com) has joined #beagle
  • [23:01:56] <ssl_> perhaps its because i have an error in my dts file?
  • [23:02:15] <veremit> quite possibly
  • [23:02:24] <veremit> those pinmuxes should just Work.
  • [23:03:00] <ssl_> can you take a look pls? http://pastebin.com/36C65u9X
  • [23:04:45] <ssl_> i copied most of it from the LCD4 file
  • [23:12:40] <veremit> sorry ssl .. I haven't got any sources here to compare with
  • [23:13:31] <ssl_> too bad, ok
  • [23:17:20] * boris_G (~boris@58.165.161.10) Quit (Quit: This computer has gone to sleep)
  • [23:19:24] * mrpackethead (~mrpacketh@103.14.185.15) has joined #beagle
  • [23:19:51] * dgerlach (~dave@nat/ti/x-pwzywqfvvvrfhirb) has joined #beagle
  • [23:21:42] * rcn-ee (~voodoo@64.77.213.245) Quit (Remote host closed the connection)
  • [23:23:49] * zer0s (~hizuzu@c-98-198-88-222.hsd1.tx.comcast.net) Quit (Quit: Leaving)
  • [23:24:41] * mrpackethead (~mrpacketh@103.14.185.15) Quit (Ping timeout: 272 seconds)
  • [23:24:53] * Calc_ (~Calc@c-76-100-81-122.hsd1.md.comcast.net) has joined #beagle
  • [23:27:40] * kiwichris (~textual@1.146.196.211) has joined #beagle
  • [23:28:15] * CalcMan (~Calc@c-76-100-81-122.hsd1.md.comcast.net) Quit (Ping timeout: 252 seconds)
  • [23:29:11] * rob_w (~rob@unaffiliated/rob-w/x-1112029) has joined #beagle
  • [23:48:36] <hiredman> is there a good non-usb alternative to getting wifi on the beaglebone(black)?
  • [23:49:11] <veremit> wifi cape?
  • [23:49:19] <veremit> support is a bit hit-and-miss though
  • [23:51:27] * vmayoral (~vmayoral@ppp-72-217.15-151.iol.it) Quit (Quit: vmayoral)
  • [23:51:51] <hiredman> I see
  • [23:53:09] * stahl (~stahl@178-83-160-218.dynamic.hispeed.ch) Quit (Ping timeout: 248 seconds)
  • [23:53:34] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Ping timeout: 252 seconds)
  • [23:53:34] <veremit> or use a platform with built-in wifi .. :)
  • [23:54:11] <veremit> *cough*wandboard-dual+*cough* :)
  • [23:55:13] * rsalveti (~rsalveti@unaffiliated/rsalveti) Quit (Ping timeout: 252 seconds)
  • [23:56:19] <hiredman> it looks like there are a number of spi based wifi units, maybe I'll have to try one of those
  • [23:56:27] <ds2> SPI
  • [23:56:31] <ds2> I2C
  • [23:56:36] <ds2> bitbang
  • [23:56:38] <ds2> sdio
  • [23:57:50] <ssl_> shit, it looks like i need to type xhost +localhost on the BBB itself (not via ssh) to be able to launch gui applications on the BBB screen via ssh. but i don't have a usb keyboard or mouse :( any other options?
  • [23:58:41] <ds2> look up what that does
  • [23:58:41] <hiredman> ds2: ?
  • [23:59:09] <veremit> ssl_ .. xhost is a hack .. it works but isn't recommended
  • [23:59:21] <veremit> ssh -X or ssh -Y should give you X access via ssh
  • [23:59:28] <veremit> ie. ssh X tunnelling
  • [23:59:43] <veremit> you will need ot enable X11 tunelling in your ssh server
  • [23:59:46] <veremit> disabled by default