• [00:05:50] * jluxenberg (~jared@174-31-133-171.tukw.qwest.net) Quit (Ping timeout: 255 seconds)
  • [00:10:12] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Quit: Verlassend)
  • [00:11:25] * grund (~grund@host65-17-84-58.birch.net) Quit (Ping timeout: 276 seconds)
  • [00:12:11] <djlewis> perry__: it has already been done with Angstrom.
  • [00:15:38] * jonpry (~jonpry@63.245.31.4) has joined #beagle
  • [00:16:23] <perry__> can I just replace the kernel I have with the angstrom kernel?
  • [00:18:05] * brijesh (~Brijesh@nat/ti/x-mirvtjnanunfpxrp) Quit (Quit: Leaving)
  • [00:18:30] <djlewis> perry__: it is not as obvious to me that the drivers are actually ready for plug and pray.
  • [00:18:47] <djlewis> perry__: did you read the googlegroups postings by Gerald about them?
  • [00:19:19] <djlewis> that was back in September so they may have progressed since.
  • [00:20:30] * omarrmz (~x0084701@nat/ti/x-pihhpoknmpuuuvbb) has left #beagle
  • [00:20:43] <djlewis> perry__: you might ask if anyone has the 5mp leopard board cam working in any XM platform
  • [00:20:57] * mrc3_ (~mrc3@nat/ti/x-onhafcnjvkfmquhj) Quit (Remote host closed the connection)
  • [00:21:06] * mrc3_ (~mrc3@nat/ti/x-waodaieygdrzllpq) has joined #beagle
  • [00:21:24] <perry__> yes I read the Gerald postings.
  • [00:26:47] * NishanthMenon (~nmenon@nat/ti/x-eajhuvuatmamvzgz) Quit (Quit: Ex-Chat)
  • [00:26:47] * prpplague (~danders@192.94.94.105) Quit (Quit: Leaving)
  • [00:28:10] * gunter (~gunter@nat/ti/x-djijbpnufbszwjyl) Quit (Quit: Leaving)
  • [00:28:51] * gunter (~gunter@nat/ti/x-hwplyuymtsracxkl) has joined #beagle
  • [00:29:26] * ppotera__ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [00:29:28] * ppotera__ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Client Quit)
  • [00:32:52] <djlewis> perry__: looks like so far only mt9v113 VGA and mt9t111 3MP are supported
  • [00:32:54] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Ping timeout: 240 seconds)
  • [00:33:09] <djlewis> but that is old info.
  • [00:33:32] <perry__> okay thanks. So my intuition of webcam might work better.
  • [00:35:08] * mrc3_ (~mrc3@nat/ti/x-waodaieygdrzllpq) Quit (Remote host closed the connection)
  • [00:35:44] * mrc3_ (~mrc3@nat/ti/x-hdvfhirzqtblkync) has joined #beagle
  • [00:44:32] <djlewis> perry__: a webcam poses other problems. are you on a deadline?
  • [00:45:31] * mrc3_ (~mrc3@nat/ti/x-hdvfhirzqtblkync) Quit (Quit: Leaving)
  • [00:45:35] <djlewis> yes, most webcams are more likely to work
  • [00:45:51] <perry__> no deadline, thanks for asking -thats nice- just playing right now. I'm "git-ing" the latest kernel 2.6.x and will try to compile/patch on another sd card.
  • [00:47:27] <djlewis> perry__: it looks to me that the leopardboard cams are reporting model by i2c
  • [00:47:58] <djlewis> try the uboot i2c tools to look for it. Does it report during uboot?
  • [00:48:06] <perry__> that makes sense since the camera port does i2c as well.
  • [00:48:09] * peabody124 (~peabody12@128.249.96.21) Quit (Quit: peabody124)
  • [00:48:12] <perry__> I'll check
  • [00:49:47] <djlewis> see the middle of this: http://answerpot.com/showthread.php?827579-linux-omap-psp%3A+Add+camera+bootarg
  • [00:51:14] * peabody124 (~peabody12@128.249.96.124) has joined #beagle
  • [00:52:33] <djlewis> perry__: get a spare SD and build up a Angstrom DEMO image
  • [00:52:54] * tdh2002 (~tdh2002@113.65.137.194) has joined #beagle
  • [00:52:56] <djlewis> http://www.angstrom-distribution.org/demo/beagleboard/
  • [00:53:20] <perry__> got a link? BTW, no i2c model message.
  • [00:53:31] <perry__> got it
  • [00:53:47] <djlewis> build = setup card, copy files to card :)
  • [00:54:47] <djlewis> perry__: i think it
  • [00:55:08] <djlewis> the cams use i2c-1 at u-boot or i2c-2 at fs
  • [00:55:31] <djlewis> i2cprobe should show something in uboot
  • [00:56:03] <djlewis> only a adderss in hex though
  • [00:57:27] <djlewis> if the patches include that camera the address would report the model during u-boot
  • [00:58:26] * Animule_ (~Animal@65-102-247-211.hlrn.qwest.net) has joined #beagle
  • [00:58:46] <perry__> right. The angstrom distros look knida old for the XM
  • [00:59:11] <Jefro> hi Dan__ - I hear you are having some trouble
  • [00:59:19] <Dan__> hi Jefro
  • [00:59:35] <Dan__> yeah I'm trying to get DSP support, so I'm compiling Linux, etc
  • [00:59:39] * tconant (~tconant@68.111.35.226) Quit (Quit: tconant)
  • [00:59:49] <Dan__> i'm following the instructions here: http://www.elinux.org/BeagleBoard_Ubuntu_%26_DSP_From_Sources
  • [00:59:50] * espindola (~espindola@CPE001a704e2b6d-CM001225dd5348.cpe.net.cable.rogers.com) Quit (Read error: Connection reset by peer)
  • [00:59:51] <djlewis> perry__: yep, the dates match the list messages
  • [00:59:56] <Jefro> always fun :)
  • [01:00:03] <Dan__> there have been some changes due to the instructions being out of date, etc
  • [01:00:20] * espindola (~espindola@CPE001a704e2b6d-CM001225dd5348.cpe.net.cable.rogers.com) has joined #beagle
  • [01:00:23] <Dan__> for example, now its using ttyO2 instead of ttyS2
  • [01:00:34] <Dan__> however there are still some problems
  • [01:00:46] <djlewis> perry__: another option is narcissus
  • [01:00:48] <Dan__> I can't get things to display via HDMI
  • [01:00:50] <Jefro> Yes, there is that. Have you gotten the kernel to boot?
  • [01:00:53] <Dan__> although the demo image works
  • [01:00:54] <Dan__> yeah
  • [01:01:06] <Dan__> i have received some help from rcn-ee
  • [01:01:23] <Jefro> good - IIRC I think he wrote at least part of that page
  • [01:01:43] * Animule (~Animal@70-56-35-65.hlrn.qwest.net) Quit (Ping timeout: 272 seconds)
  • [01:01:46] <Dan__> i can boot now with the kernel that I compiled
  • [01:01:47] * djlewis (~djlewis@75.15.65.246) Quit (Quit: Leaving.)
  • [01:01:53] <Dan__> with a rootfs generated through rootstock
  • [01:02:11] * djlewis (~djlewis@75.15.65.246) has joined #beagle
  • [01:02:15] <Dan__> however the problem is that the custom build doesn't seem to work for HDMI
  • [01:02:22] <Dan__> and I have a lsmod issue (nothing shows)
  • [01:02:25] <djlewis> geez, i just closed my pidgin :(
  • [01:02:35] <Dan__> seems to be an issue with the deb that i generated
  • [01:02:37] <Jefro> cool! (you have gotten farther than I have)
  • [01:02:37] <rcn-ee> Yeah, the "DSP" stuff is a big work in progress, stick with 2.6.37-rc kernels for now.. i got a couple new errors with the dsp today, but still no video..
  • [01:03:04] <Dan__> oh really
  • [01:03:22] <djlewis> rcn-ee: what do you have in leopardboard cam (5MP) support?
  • [01:03:24] <Dan__> yeah I'm using 2.6.37 kernels
  • [01:03:50] * Mike__ (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [01:04:16] <Dan__> rcn-ee how did you generate the demo Maverick image?
  • [01:04:35] <rcn-ee> djlewis, i have zero... as is: it currently won't work out the box.. i looked at porting koen's stuff from 2.6.32-psp, but got busy with other things..
  • [01:04:42] <Dan__> since I don't have any issues with that image
  • [01:04:56] <djlewis> so 2.6.32psp has it ?
  • [01:05:06] <djlewis> or some..
  • [01:05:30] <djlewis> perry__: get that?
  • [01:05:40] <rcn-ee> yeah, it looked like koen had got it working for the angstrom 2.6.32-psp kernel..
  • [01:06:06] <rcn-ee> Dan__, do you want the 'high level' or the 'actual script i ran'?
  • [01:06:10] * grund (~grund@64.244.156.164) has joined #beagle
  • [01:06:19] <djlewis> rcn-ee: thank you
  • [01:06:21] <Dan__> ideally something that I can reproduce step-by-step :)
  • [01:06:40] <perry__> yes I got it, thanks!
  • [01:06:43] <Dan__> the idea is to take those steps and then modify them, hopefully solving my DVI issue
  • [01:06:53] <Dan__> while still running the latest kernel :)
  • [01:06:55] * Guest31214 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Ping timeout: 245 seconds)
  • [01:07:18] <Dan__> so the script would be nic
  • [01:07:19] <Dan__> e
  • [01:07:46] <rcn-ee> just give me sec, i'll tweak it for the rc's..
  • [01:07:58] <Dan__> cool, thanks!
  • [01:09:12] <Jefro> I'm at 14% battery & will have to jump out - thanks for helping rcn-ee
  • [01:09:32] <Dan__> thanks to both of you for your help
  • [01:09:33] <rcn-ee> no problem, take it easy Jefro
  • [01:10:27] <rcn-ee> Dan__, okay, first thing you've done "sudo apt-get install rootstock" right?
  • [01:10:51] <Dan__> yeah
  • [01:12:01] <rcn-ee> great, okay next: "git clone git://github.com/RobertCNelson/omap-image-builder.git" (this is actually the script my build bot uses for release images)
  • [01:12:23] <Dan__> ok
  • [01:12:34] * looking (c05e5e69@gateway/web/freenode/ip.192.94.94.105) has joined #beagle
  • [01:13:12] <Dan__> ok done
  • [01:13:27] * looking (c05e5e69@gateway/web/freenode/ip.192.94.94.105) Quit (Client Quit)
  • [01:13:28] <rcn-ee> then just run "./build_image.sh" it'll then go to town.. it's not really for end users, it's very frankstein, but it'll give you an idea..
  • [01:13:32] <Dan__> ok
  • [01:13:37] <Dan__> cool, thanks, i'll give that a shot :)
  • [01:13:58] <rcn-ee> it'll usually take 15-30 minutes..
  • [01:18:06] * hgs (~hgs@82.202-63-132.static.qala.com.sg) has joined #beagle
  • [01:20:53] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [01:25:51] * espindola (~espindola@CPE001a704e2b6d-CM001225dd5348.cpe.net.cable.rogers.com) Quit (Quit: Ex-Chat)
  • [01:26:54] * Zoxc (Zoxc@ti0128a380-dhcp0526.bb.online.no) Quit ()
  • [01:28:06] * stonecheng (~stcheng@221.10.25.6) has joined #beagle
  • [01:29:09] <Dan__> ok, it finished. It seems like I get an initrd and a rootfs. No uImage?
  • [01:30:25] <rcn-ee> are you sure? there should be 4 files under deploy/ubuntu.../
  • [01:32:39] <Dan__> in deploy/unbuntu, there's: rootfs, initrd, setup script, and vmlinuz kernel
  • [01:32:48] <Dan__> ok so i should just run the setup script right?
  • [01:33:19] <rcn-ee> then it worked... the 'setup script' converts the vmlinuz to a uImage based on what target it's for.. uImage's are only good for u-boot, rootstock is generic..
  • [01:33:31] <Dan__> ah ok, cool!
  • [01:36:05] * Mike__ (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Ping timeout: 240 seconds)
  • [01:40:04] * Animule_ is now known as Animule
  • [01:43:47] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [01:46:33] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) has joined #beagle
  • [01:48:11] <Dan__> niiiiiiice, yeah so running your script generates something that works with my LCD
  • [01:48:58] <Dan__> oh that's interesting
  • [01:49:34] <Dan__> the LCD is on tty1 and serial is over ttyO2, is that expected behavior?
  • [01:49:50] <rcn-ee> are you sure it isn't tty0?
  • [01:50:05] <Dan__> yup, positive
  • [01:50:07] <Dan__> tty1
  • [01:50:24] <Dan__> that would explain why it wasn't working earlier
  • [01:53:43] * emeb (~ericb@ip72-223-92-88.ph.ph.cox.net) Quit (Quit: Leaving.)
  • [01:57:05] <tdh2002> rcn-ee : i try to excute build_image.sh , I got erroe : bzr: ERROR: Unable to determine your name.
  • [01:57:07] <tdh2002> Please, set your name with the 'whoami' command.
  • [01:57:09] <tdh2002> E.g. bzr whoami "Your Name <name@example.com>"
  • [01:57:11] <tdh2002> any idea?
  • [01:57:20] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [01:58:04] * CMoH-notebook (~cipi@unaffiliated/c-moh) Quit (Remote host closed the connection)
  • [01:59:29] <rcn-ee> yeap, do as the "E.g." example says.. the script clones a bzr repo and applies 5 non-upstreamable patches.. i don't really recommend end users to use the scipt as is..
  • [01:59:49] <rcn-ee> bzr whoami "My name <my email@my.com>"
  • [02:01:30] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) Quit (Ping timeout: 245 seconds)
  • [02:04:17] <tdh2002> ok
  • [02:07:44] * ozk (~ozk@nat/ti/x-mhmytssduaxkbdei) Quit (Ping timeout: 260 seconds)
  • [02:09:19] * emeb|mac (~ericb@ip72-223-92-88.ph.ph.cox.net) has joined #beagle
  • [02:10:46] * CMoH (~cipi@unaffiliated/c-moh) Quit (Remote host closed the connection)
  • [02:18:03] * alextisserant (~alextisse@c-69-181-223-70.hsd1.ca.comcast.net) Quit (Quit: alextisserant)
  • [02:18:38] * raster (raster@enlightenment/developer/raster) has joined #beagle
  • [02:18:56] * jluxenberg (~jared@174-31-133-171.tukw.qwest.net) has joined #beagle
  • [02:19:03] * raster (raster@enlightenment/developer/raster) Quit (Remote host closed the connection)
  • [02:19:28] * raster (raster@enlightenment2.osuosl.org) has joined #beagle
  • [02:19:28] * raster (raster@enlightenment2.osuosl.org) Quit (Changing host)
  • [02:19:28] * raster (raster@enlightenment/developer/raster) has joined #beagle
  • [02:19:56] <jluxenberg> has anyone where had success installing ruby or nano via opkg on a vanilla beagle install?
  • [02:20:21] <jluxenberg> I'm getting these errors, it appears that ncurses and ncurses-terminfo-base conflict:
  • [02:20:22] <jluxenberg> http://pastebin.com/keFAnh2J
  • [02:20:51] * IanWiz (~ian@c-98-239-179-230.hsd1.pa.comcast.net) has joined #beagle
  • [02:31:28] * peabody124 (~peabody12@128.249.96.124) Quit (Quit: peabody124)
  • [02:32:14] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [02:37:48] <Dan__> rcn-ee: OK, I can get display working now, but drivers are still not installed properly (lsmod)
  • [02:49:17] * robtow (~a0272704@nat/ti/x-kisjezxdefvibmxb) Quit (Quit: Leaving.)
  • [02:51:21] <rcn-ee> Dan__, what did you change from the generated image?
  • [02:51:34] * jonpry (~jonpry@63.245.31.4) Quit (Ping timeout: 240 seconds)
  • [02:51:52] <Dan__> oh, afterwards i reverted back to my stuff and changed tty0 to tty1 in my boot.scr
  • [02:52:17] <Dan__> some guides say to run modules_install, but I dunno how to do that within your script infrastructure
  • [02:54:19] <rcn-ee> that tty0 doesn't make a lot of sense: specially when the script default to tty0 https://github.com/RobertCNelson/omap-image-builder/blob/master/tools/setup_sdcard.sh#L159
  • [02:54:55] <rcn-ee> when i build kernel, i usually ignore hte deb, and just copy the uImage to the fatfs, and then the modules to the rootfs..
  • [02:55:02] <Dan__> ah ha
  • [02:55:24] <Dan__> what i do is copy over the uImage to /boot, and then run rootstock with the deb as the input
  • [02:55:37] <Dan__> was I supposed to copy over the modules somehow manually as well?
  • [02:55:45] <Dan__> how do I do that?
  • [02:55:52] <rcn-ee> rootstock, will dump the *.deb to the rootfs..
  • [02:55:58] <rcn-ee> (so it'll be in there..)
  • [02:56:18] <Dan__> hmm right
  • [02:56:34] <Dan__> oh
  • [02:56:39] <rcn-ee> so... you shouldn't have to copy the modules.. but they aren't showing up for you either..
  • [02:56:54] <Dan__> the deb that you gave me a few days ago showed at least some modules properly
  • [02:57:01] <Dan__> so my guess is that the deb isn't being generated correctly
  • [02:57:46] <rcn-ee> just for shits, what's the ls -lh size of your rc5 deb...
  • [02:58:16] <tdh2002> rcn-ee: I got ./build_image.sh: line 289: 7za???No such comand.
  • [02:58:22] <rcn-ee> mine shows up: 18M Dec 7 15:10 linux-image-2.6.37-rc5-dl3_1.0maverick_armel.deb
  • [02:59:23] <rcn-ee> tdh2002, sounds about right, the script is not for end users.. ;) "sudo apt-get install p7zip-full"
  • [02:59:36] <tdh2002> ok
  • [02:59:44] <Dan__> -rw-r--r-- 1 dan dan 18M 2010-12-06 21:19 linux-image-2.6.37-rc4+_1.0cross_armel.deb -rw-r--r-- 1 dan dan 18M 2010-12-09 16:37 linux-image-2.6.37-rc5-dl3.1_1.0cross_armel.deb
  • [02:59:49] <Dan__> yeah 18M
  • [03:00:15] <Dan__> tdh2002 you can follow the directions here: http://elinux.org/BeagleBoardUbuntu
  • [03:00:25] <Dan__> it tells you to do the p7zip installation, etc
  • [03:00:53] <rcn-ee> wait... didn't your module directory have a "+" on it?
  • [03:01:03] <Dan__> what do you mean?
  • [03:01:05] <tdh2002> I build a anstrom-gnome-demo-image yesterday.
  • [03:02:19] <rcn-ee> tdh2002, cool, i'd rather you use the demo images or the direcitons on http://elinux.org/BeagleBoardUbuntu vs this script, as there is no guarntee it works from day to day.. ;) Dan an I are just debugging a weird issue..
  • [03:02:20] <Dan__> oh, i think i found the problem...
  • [03:02:22] <Dan__> -____-
  • [03:02:37] <Dan__> i'm building the deb, and then i make the headers
  • [03:02:55] <Dan__> doh
  • [03:03:16] <Dan__> i was following the directions on the wiki, but the script had changed
  • [03:04:20] <Dan__> lets see if it'll work now
  • [03:04:21] <rcn-ee> Dan__, was that the directions from the dsp section of the wiki?
  • [03:04:25] <Dan__> yeah
  • [03:04:39] <Dan__> i'll be updating the directions
  • [03:04:43] <rcn-ee> yeah, i need to make it work with mystuff and delete that link, it keeps getting older... ;)
  • [03:04:43] <Dan__> after i figure out the flow
  • [03:04:56] <Dan__> oh, i was planning on updating it
  • [03:05:00] <Dan__> were you going to write a new one?
  • [03:05:34] <rcn-ee> yeah, it'll mirror the sgx section, there's a script in the 2.6.37-devel "create_dsp_package.sh" that's basicly my cliff notes..
  • [03:05:43] <Dan__> ah nice
  • [03:06:18] <rcn-ee> cept it isn't really working. .;)
  • [03:06:34] <Dan__> yeah i tried running that script, haha
  • [03:06:48] <rcn-ee> 'running' oh i 'fixed' that issue today...
  • [03:07:16] <Dan__> the one where it complains about some syntax error during the make?
  • [03:07:23] <rcn-ee> i'm dropping the old bios/etc stuff that needed an ancient c++ lib..
  • [03:07:43] <Dan__> ah i see
  • [03:07:45] <Dan__> cool
  • [03:07:58] <rcn-ee> yeah as of today it doens't build anything anymore.. just downloads the recommend libs for gst-dsp..
  • [03:08:05] <Dan__> i see
  • [03:08:25] <Dan__> i was still following the DSP instructions on the wiki
  • [03:08:29] <Dan__> it seemed to go through all right
  • [03:08:36] <Dan__> but i haven't gotten DSP working yet
  • [03:08:47] <Dan__> but this is probably because i haven't gotten drivers loaded yet either haha
  • [03:09:17] <Dan__> ok, gonna go have dinner, thanks for all the help!
  • [03:09:22] <rcn-ee> from what i've read, 2.6.37-rc5 as is should work out of the box.. just missing one little detail in all the wiki's..
  • [03:09:36] <Dan__> oh, what's that detail?
  • [03:09:43] <rcn-ee> i'll let you know.. ;)
  • [03:09:57] <Dan__> haha ok
  • [03:10:02] <tdh2002> dinner , i am going to hanve lunch -_-
  • [03:10:13] <Dan__> haha
  • [03:10:24] <Dan__> tdh where are you from?
  • [03:10:35] <Dan__> i'm in Texas
  • [03:10:37] <tdh2002> China ,
  • [03:10:41] <Dan__> oh cool
  • [03:10:46] <Dan__> i'm chinese (ABC)
  • [03:10:55] <Dan__> ni hao
  • [03:11:09] <tdh2002> ??????
  • [03:11:22] <tdh2002> no input method for chinese ?
  • [03:11:26] <Dan__> yeah haha
  • [03:11:43] <Dan__> haven't bothered installing it
  • [03:11:46] <tdh2002> ??????????????????????
  • [03:11:51] <Dan__> yeah
  • [03:11:59] <Dan__> it's displaying all right
  • [03:12:20] <tdh2002> ????????????????
  • [03:12:20] <Dan__> ok off i go
  • [03:12:27] <Dan__> yeah my parents are chinese
  • [03:12:30] <Dan__> i was born in the US though
  • [03:13:00] <tdh2002> ???????????????????????? ???????????????????????????
  • [03:13:13] <Dan__> i'm 23
  • [03:13:16] <Dan__> graduate student
  • [03:13:41] <Dan__> ok i'd love to talk more but i gotta go, it's 9PM here and i haven't eaten dinner yet :)
  • [03:13:44] <Dan__> talk to you guys later
  • [03:14:12] <tdh2002> ?????????
  • [03:14:25] <tdh2002> ??????
  • [03:22:13] * Mike__ (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [03:24:30] <jluxenberg> I've got a UVC webcam hooked up to my beagleboard. If I continuously run "uvccapture" to grab frames from it, eventually I get this error in my dmesg output:
  • [03:25:00] <jluxenberg> http://pastebin.com/yQ6BQDZU
  • [03:25:52] <jluxenberg> and, it looks like when this happens it fubars the whole USB bus, as my network stops working as well
  • [03:29:04] * Openfree` (~Openfreer@116.228.88.131) Quit (Remote host closed the connection)
  • [03:30:50] * Openfree` (~Openfreer@116.228.88.131) has joined #beagle
  • [03:38:26] * heathkid (~heathkid2@68-31-164-243.pools.spcsdns.net) has joined #beagle
  • [03:40:35] * heathkid (~heathkid2@68-31-164-243.pools.spcsdns.net) has left #beagle
  • [03:44:02] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera_)
  • [03:44:19] * Ceriand|desktop1 (~Ceriand@c-24-23-34-141.hsd1.ca.comcast.net) has joined #beagle
  • [03:44:21] * Ceriand|desktop1 (~Ceriand@c-24-23-34-141.hsd1.ca.comcast.net) Quit (Changing host)
  • [03:44:21] * Ceriand|desktop1 (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [03:45:56] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) has joined #beagle
  • [03:46:00] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Ping timeout: 240 seconds)
  • [03:49:23] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) has joined #beagle
  • [04:01:42] * espindola (~espindola@CPE001a704e2b6d-CM001225dd5348.cpe.net.cable.rogers.com) has joined #beagle
  • [04:04:27] * aholler_ (~aholler@p57B20445.dip0.t-ipconnect.de) has joined #beagle
  • [04:06:45] * amitk (~amit@122.169.18.131) has joined #beagle
  • [04:07:54] * aholler (~aholler@p57B20113.dip0.t-ipconnect.de) Quit (Ping timeout: 260 seconds)
  • [04:10:31] * jayabharath (~jayabhara@nat/ti/x-trouhpdpomrqunau) has joined #beagle
  • [04:15:34] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) has joined #beagle
  • [04:17:05] * aholler_ is now known as aholler
  • [04:21:20] * Openfree` (~Openfreer@116.228.88.131) Quit (Remote host closed the connection)
  • [04:21:53] * Openfree` (~Openfreer@116.228.88.131) has joined #beagle
  • [04:24:14] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) has joined #beagle
  • [04:32:18] * Openfree` (~Openfreer@116.228.88.131) Quit (Remote host closed the connection)
  • [04:34:10] * Openfree` (~Openfreer@116.228.88.131) has joined #beagle
  • [04:40:43] * DesktopMa (~DesktopMa@82.116.73.185) Quit (Ping timeout: 240 seconds)
  • [04:46:17] * denix (~denys@nat/ti/x-fotjzqdbjexblklu) Quit (Ping timeout: 264 seconds)
  • [04:52:03] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [04:52:36] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Client Quit)
  • [05:03:49] * Openfree` (~Openfreer@116.228.88.131) Quit (Remote host closed the connection)
  • [05:05:25] * Openfree` (~Openfreer@116.228.88.131) has joined #beagle
  • [05:05:53] * Xerion_ (~xerion@54196686.cm-5-2b.dynamic.ziggo.nl) has joined #beagle
  • [05:08:10] * Xerion (~xerion@54196686.cm-5-2b.dynamic.ziggo.nl) Quit (Ping timeout: 245 seconds)
  • [05:08:10] * Xerion_ is now known as Xerion
  • [05:35:29] <tdh2002> rcn-ee: it seems very good :)
  • [05:39:35] * tdh2002 (~tdh2002@113.65.137.194) Quit (Ping timeout: 240 seconds)
  • [05:48:49] <htns> anyone know if all the gpio signals on dm3730 or omap3530 are valid interrupt sources?
  • [05:53:21] <_av500_> i would have to look into the trm :)
  • [05:54:39] * tdh2002 (~tdh2002@58.63.93.237) has joined #beagle
  • [05:55:40] * Ceriand|desktop1 (~Ceriand@unaffiliated/ceriand) Quit (*.net *.split)
  • [05:55:40] * stonecheng (~stcheng@221.10.25.6) Quit (*.net *.split)
  • [05:55:40] * theholyduck (~holyduck@82.147.59.59) Quit (*.net *.split)
  • [05:55:40] * adj (antti@hervanta.com) Quit (*.net *.split)
  • [05:55:40] * pfoetchen (~pfoetchen@fachschaft.mathematik.uni-wuerzburg.de) Quit (*.net *.split)
  • [05:55:40] * supernau1 (~brian@echo.atld.org) Quit (*.net *.split)
  • [05:55:40] * Kevin` (~kevin@router.kwzs.be) Quit (*.net *.split)
  • [05:56:09] <ds2> hmm
  • [05:58:59] <tdh2002> hello
  • [05:59:41] * supernaut (~brian@echo.atld.org) has joined #beagle
  • [05:59:49] * Ceriand|desktop1 (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [05:59:49] * stonecheng (~stcheng@221.10.25.6) has joined #beagle
  • [05:59:49] * theholyduck (~holyduck@82.147.59.59) has joined #beagle
  • [05:59:49] * adj (antti@hervanta.com) has joined #beagle
  • [05:59:49] * pfoetchen (~pfoetchen@fachschaft.mathematik.uni-wuerzburg.de) has joined #beagle
  • [05:59:49] * Kevin` (~kevin@router.kwzs.be) has joined #beagle
  • [06:03:51] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Ping timeout: 265 seconds)
  • [06:04:49] * spvensko_ (~spvensko@12.131.126.173) Quit (Read error: Connection reset by peer)
  • [06:05:03] * spvensko_ (~spvensko@12.131.126.173) has joined #beagle
  • [06:08:56] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) Quit (Read error: Connection reset by peer)
  • [06:10:36] * espindola (~espindola@CPE001a704e2b6d-CM001225dd5348.cpe.net.cable.rogers.com) Quit (Quit: Ex-Chat)
  • [06:10:59] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) Quit (Remote host closed the connection)
  • [06:13:39] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [06:21:26] * gisborne (48dcfa8f@gateway/web/freenode/ip.72.220.250.143) has joined #beagle
  • [06:21:33] <gisborne> Evening all.
  • [06:22:16] <tdh2002> afternoon ...
  • [06:22:24] <gisborne> Having some difficulty getting Ubuntu up on my xM, if anyone has time to help... :-(
  • [06:22:59] <gisborne> I tried to use the instructions from http://elinux.org/BeagleBoardUbuntu but that was just full of fail.
  • [06:24:25] * jayabharath (~jayabhara@nat/ti/x-trouhpdpomrqunau) Quit (Remote host closed the connection)
  • [06:24:46] <tdh2002> I am doing this Now...
  • [06:24:56] <tdh2002> where do you fail?
  • [06:25:18] <gisborne> Running it on Ubuntu Meerkat.
  • [06:26:17] <gisborne> The first time it was trying to make an ext4 partition, which apparently my parted doesn't understand. So I changed it to ext3. Fine.
  • [06:26:42] <gisborne> But then it just stops at step 5. No error, just dies.
  • [06:27:30] <tdh2002> /dev/mmcblk0p2 on / type ext4
  • [06:27:50] <tdh2002> sorry i just use "sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle"
  • [06:27:59] <tdh2002> to format my SD card
  • [06:28:02] * alextisserant (~alextisse@c-67-180-181-51.hsd1.ca.comcast.net) has joined #beagle
  • [06:28:03] <gisborne> I don't know what that means. You want me to type that?
  • [06:28:47] <gisborne> I'm doing sudo ./setup_sdcard.sh --mmc /dev/sdb --uboot beagle
  • [06:28:56] <tdh2002> hmmm
  • [06:29:01] <tdh2002> success?
  • [06:29:08] <gisborne> No, it dies at step 5.
  • [06:29:35] <tdh2002> 5 / 9: Formatting Boot Partition , this step
  • [06:29:40] <gisborne> Indeed.
  • [06:30:45] <tdh2002> hmm , where linux of dist do you use?
  • [06:30:52] <gisborne> Meerkat
  • [06:32:59] <tdh2002> the same as me, how big is you sd card?
  • [06:33:01] <tdh2002> when you excute the script, make sure the sd card is umounted
  • [06:33:47] <gisborne> 4GB
  • [06:34:28] <gisborne> Dies at step 5 with no error
  • [06:34:43] <tdh2002> almost the same as me,
  • [06:34:59] <tdh2002> but i do have no errors occur
  • [06:35:58] <gisborne> This is so frustrating. If I could only get Linux up, I'd be fine. But it's this basic first step that's clunky and poorly documented and doesn't work.
  • [06:36:55] <tdh2002> will you please tell me the steps you do ?
  • [06:37:13] <tdh2002> Or there is something wrong with you sd card
  • [06:37:24] <gisborne> Not much to tell. I downloaded the script, replaced the setup.sh with the different download, run the script.
  • [06:37:36] <gisborne> I don't think so. I was able to get it to boot the basic test image.
  • [06:38:02] <tdh2002> when you excute the script, make sure the sd card is umounted :(
  • [06:38:12] * rsalveti (~rsalveti@201.82.72.47) Quit (Ping timeout: 250 seconds)
  • [06:38:50] <gisborne> It's sufficiently borked right now that it doesn't mount.
  • [06:39:01] * rsalveti (~rsalveti@201.82.72.47) has joined #beagle
  • [06:39:16] <gisborne> Are you saying the script doesn't work for you?
  • [06:39:35] <tdh2002> it works for me
  • [06:40:01] <gisborne> And you have a xM?
  • [06:40:09] <tdh2002> the step 2 is Unmountting Partitions...
  • [06:40:13] <tdh2002> yes xm A2
  • [06:40:41] <gisborne> Is there some alternative? Might someone post an .img of a working sd card?
  • [06:41:05] <gisborne> Did you replace the script in the original download? I'm wondering if I should try the original script.
  • [06:41:29] <tdh2002> i just wget the script then excute it
  • [06:45:11] <gisborne> What might I try to work out what's wrong? Can you suggest anything?
  • [06:45:50] <tdh2002> do you have another SD card?
  • [06:47:44] <gisborne> I do, and it does the same thing.
  • [06:48:09] <gisborne> I think I'm going to try a different computer. Which means installing Ubuntu on a different computer. :-)
  • [06:48:17] <gisborne> Wish me luck.
  • [06:49:01] <tdh2002> i install ubuntu 10.10 32bit
  • [06:57:39] * emeb|mac (~ericb@ip72-223-92-88.ph.ph.cox.net) Quit (Read error: Operation timed out)
  • [07:08:15] * DesktopMa (~DesktopMa@82.116.91.57) has joined #beagle
  • [07:12:54] * Mike__ (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Quit: Leaving)
  • [07:21:25] * mobidev|aw (~mobidev@94.127.205.30) has joined #beagle
  • [07:24:01] * ssvb (~ssvb@a88-114-220-213.elisa-laajakaista.fi) Quit (Quit: Leaving)
  • [07:29:01] <hitlin37> this works fine with a 2-d array(float) but crashes if input is struct with two float elements...am i handling struct wrongly http://pastebin.com/MUkG86Bb
  • [07:34:09] * stonecheng (~stcheng@221.10.25.6) Quit (Ping timeout: 240 seconds)
  • [07:39:10] <hitlin37> ?
  • [07:42:40] * abdba (~abdba@nat/ti/x-upasjosvqqoqqdza) has joined #beagle
  • [07:46:57] * mobidev|aw (~mobidev@94.127.205.30) Quit (Quit: I go offline...)
  • [07:49:54] * jpirko (~jirka@ip-89-103-91-111.net.upcbroadband.cz) has joined #beagle
  • [07:56:05] * alextisserant (~alextisse@c-67-180-181-51.hsd1.ca.comcast.net) Quit (Quit: alextisserant)
  • [07:59:37] * mza (~mza@2001:470:dc88:2:21f:e2ff:fe10:3fa) has joined #beagle
  • [08:08:37] * courville (~courville@archos.rain.fr) has joined #beagle
  • [08:15:19] * _roger_ (~a0740758@nat/ti/x-yefyhvyjltecsrqc) has joined #beagle
  • [08:23:08] * stonecheng (~stcheng@221.10.25.6) has joined #beagle
  • [08:25:07] * stonecheng (~stcheng@221.10.25.6) has left #beagle
  • [08:33:47] * likewise (~likewise@205-89-ftth.onsneteindhoven.nl) Quit (Remote host closed the connection)
  • [08:33:52] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) has joined #beagle
  • [09:06:40] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) has joined #beagle
  • [09:09:00] * abdba (~abdba@nat/ti/x-upasjosvqqoqqdza) Quit (Quit: Ex-Chat)
  • [09:12:01] * dl9pf (~quassel@opensuse/member/dl9pf) Quit (Quit: No Ping reply in 180 seconds.)
  • [09:12:29] * dl9pf (~quassel@opensuse/member/dl9pf) has joined #beagle
  • [09:19:25] * Ceriand|desktop1 (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [09:36:07] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) has joined #beagle
  • [09:38:01] * ssvb (~ssvb@net-217.nrpn.net) has joined #beagle
  • [09:39:32] * tdh2002 (~tdh2002@58.63.93.237) has left #beagle
  • [09:51:49] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Ping timeout: 240 seconds)
  • [09:56:09] * stonecheng (~stcheng@221.10.25.6) has joined #beagle
  • [09:57:37] * stonecheng (~stcheng@221.10.25.6) has left #beagle
  • [09:57:59] * stonecheng (~stcheng@221.10.25.6) has joined #beagle
  • [10:01:02] * jpirko (~jirka@ip-89-103-91-111.net.upcbroadband.cz) Quit (Quit: Leaving)
  • [10:02:23] * stonecheng (~stcheng@221.10.25.6) has left #beagle
  • [10:06:43] * rodrigo_golive (c8bab803@gateway/web/freenode/ip.200.186.184.3) has joined #beagle
  • [10:20:27] * denix (~denys@nat/ti/x-ttkyleejdgmeuunh) has joined #beagle
  • [10:24:01] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [10:24:16] * mcgeagh (~mcgeagh@fw-tnat.cambridge.arm.com) has joined #beagle
  • [10:24:21] * mcgeagh (~mcgeagh@fw-tnat.cambridge.arm.com) Quit (Changing host)
  • [10:24:21] * mcgeagh (~mcgeagh@xbmc/staff/mcgeagh) has joined #beagle
  • [10:27:34] * florian_kc (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [10:29:12] * florian_kc is now known as florian
  • [10:31:36] * denix (~denys@nat/ti/x-ttkyleejdgmeuunh) Quit (Ping timeout: 265 seconds)
  • [10:32:13] * raster (raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [10:33:37] * jpirko (~jirka@nat/redhat/x-gepmuwvhqdvobpyn) has joined #beagle
  • [10:34:02] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) has joined #beagle
  • [10:37:21] * kunguz (~Kaan@95.5.1.153) has joined #beagle
  • [10:40:19] * kunguz (~Kaan@95.5.1.153) Quit (Remote host closed the connection)
  • [10:49:24] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) Quit (Remote host closed the connection)
  • [10:52:13] * amitk (~amit@122.169.18.131) Quit (Quit: leaving)
  • [10:54:35] * amitk (~amit@122.169.18.131) has joined #beagle
  • [11:00:14] * _koen_ (~x0115699@nat/ti/x-qwqzepvhbaecpduh) has joined #beagle
  • [11:01:03] * isbric_ is now known as isbric
  • [11:03:07] * amitk (~amit@122.169.18.131) Quit (Quit: leaving)
  • [11:09:29] * stone1 (~stone@123.147.251.120) has joined #beagle
  • [11:09:47] * jacquesdupontd (~jacquesud@cxr69-7-82-235-33-230.fbx.proxad.net) Quit (Read error: Connection reset by peer)
  • [11:13:14] * naeg (~naeg@194.208.239.170) has joined #beagle
  • [11:14:48] * jacquesdupontd (~jacquesud@cxr69-7-82-235-33-230.fbx.proxad.net) has joined #beagle
  • [11:15:49] * stone2 (~stone@123.147.251.120) has joined #beagle
  • [11:15:53] * stone1 (~stone@123.147.251.120) has left #beagle
  • [11:21:40] * gisborne (48dcfa8f@gateway/web/freenode/ip.72.220.250.143) Quit (Quit: Page closed)
  • [11:29:50] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera_)
  • [11:34:03] * gustavoz (~gustavoz@host79.201-252-22.telecom.net.ar) has joined #beagle
  • [11:34:47] * wcklyaditya (401acd64@gateway/web/freenode/ip.64.26.205.100) has joined #beagle
  • [11:38:17] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) Quit (Ping timeout: 265 seconds)
  • [11:40:41] * vedarthk (dce14324@gateway/web/freenode/ip.220.225.67.36) has joined #beagle
  • [11:42:09] * jonpry (~jonpry@63.245.31.4) has joined #beagle
  • [11:42:10] <vedarthk> Can anyone suggest me a good simulator of beagleboard for linux development ?
  • [11:42:39] <aholler> a beagleboard
  • [11:42:55] <aholler> for linux development just use a normal pc
  • [11:44:04] <vedarthk> we want to develop our own OS and USB drivers for our own device using the eLinux kernel
  • [11:44:18] <av500> ???
  • [11:45:17] <vedarthk> @aholler : we want to develop our own OS and USB drivers for our own device using the eLinux kernel
  • [11:45:35] <aholler> you can develop the driver using a normal pc too.
  • [11:45:36] <ynezz> hm, android porting isn't the hype now...
  • [11:45:59] <av500> no, its emulators these days
  • [11:47:29] <vedarthk> @aholler : since beagle board uses EHCI / OTG... and PC uses UHCI so how to do that ?
  • [11:47:39] <aholler> vedarthk: install linux on your pc, write the driver, when it works, just compile the driver for the beagleboard. done.
  • [11:47:48] <av500> vedarthk: my pc has EHCI
  • [11:47:56] <aholler> ehci = usb 2.0
  • [11:48:12] <av500> vedarthk: anyway, there is no emulator that emulates EHCI
  • [11:48:26] <av500> and linux has EHCI drivers already....
  • [11:48:32] <vedarthk> @aholler : thankyou
  • [11:49:20] * vedarthk (dce14324@gateway/web/freenode/ip.220.225.67.36) Quit (Quit: Page closed)
  • [11:49:25] <av500> gee
  • [11:49:27] <ynezz> lol?
  • [11:50:03] * av500 even developed a gadget driver on the PC
  • [11:50:11] <aholler> some people should really buy a lego nxt instead of a beagleboard.
  • [11:50:40] <av500> aholler: thats not the issue
  • [11:50:55] <av500> some uni profs should stop thinking that the BB has to be used in every of their projects
  • [11:51:21] <aholler> thats the same, they should use a lego nxt for their projects ;)
  • [11:52:03] <ynezz> msp430!
  • [11:52:18] <aholler> if possible. less complicated, ready to use and much more fun
  • [11:52:58] <av500> i woulnt want to confine students to lego nxt only :)
  • [11:53:01] * rsalveti (~rsalveti@201.82.72.47) Quit (Read error: Connection reset by peer)
  • [11:53:26] <aholler> maybe ti should ask lego to build an nxtnxt with an omap as base.
  • [11:53:34] * rsalveti (~rsalveti@201.82.72.47) has joined #beagle
  • [11:53:41] <av500> buglab 2.0
  • [11:59:42] <aholler> they don't offer something like nxt-g (~LabView), ready to use sensors and motors, not to mention all the bricks to build funny robots
  • [12:07:17] <tasslehoff> To increase my systems robustness I want to use an initramfs (forever). OE has made me a uImage and a cpio.gz archive. I suspect I will have to make u-boot read kernel and cpio.gz into ram, and then put initrd=<cpio.gz-ramaddr> in the kernel bootargs. Correct?
  • [12:08:25] <aholler> just build a kernel which includes your initramfs and raise the limit for the kernel-size in u-boot.
  • [12:08:45] * _koen_ (~x0115699@nat/ti/x-qwqzepvhbaecpduh) Quit (Quit: Leaving.)
  • [12:09:39] * CMoH-notebook (~cipi@95.76.74.1) has joined #beagle
  • [12:09:39] * CMoH-notebook (~cipi@95.76.74.1) Quit (Changing host)
  • [12:09:39] * CMoH-notebook (~cipi@unaffiliated/c-moh) has joined #beagle
  • [12:10:11] <av500> thats how we do it afaik
  • [12:12:21] <tasslehoff> sounds good. my next Q was how to decide the addresses and bootargs, but that should be simpler then I guess.
  • [12:13:43] <tasslehoff> something special I need to do for the kernel to understand that the initramfs is the final root?
  • [12:14:09] <aholler> tasslehoff: in u-boot it's CONFIG_SYS_BOOTM_LEN, for the kernel point CONFIG_INITRAMFS_SOURCE to your root
  • [12:17:23] <aholler> tasslehoff: no, read Documentation/initrd.txt and Documentation/filesystems/ramfs-rootfs-initramfs.txt
  • [12:18:08] <tasslehoff> aholler: no = "nothing special needed"? will read docs.
  • [12:18:55] <aholler> yes, nothing special needed. just a /init. CONFIG_SYS_BOOTM_LEN in u-boot defaults to 8MB, that is to small.
  • [12:20:19] <aholler> using a symlink to busybox for /init will start busyboxs init.
  • [12:22:32] <aholler> but starting with /init as small a shell-script, like "#!/bin/sh\necho "Hello world" should be easier to start with
  • [12:23:39] <aholler> and using a static compiled busybox and nothing else might get you below the 8mb limit.
  • [12:27:16] <jonpry> ftw uncompressed ramfs with prelink
  • [12:29:01] * aholler (~aholler@p57B20445.dip0.t-ipconnect.de) Quit (Quit: 2.6.36.2)
  • [12:29:09] <tasslehoff> I understand *some* of what you say, but have to read up :)
  • [12:29:58] <tasslehoff> My kernel is 3.1M, and my cpio.gz is 40M.
  • [12:31:34] * mru again fails to see the point of initrd/initramfs
  • [12:35:11] <tasslehoff> I just started reading/testing, but for me it seems nice that I can have kernel+rootfs entirely in ram and get an (almost) fresh start on reboot.
  • [12:35:11] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) Quit (Read error: Connection reset by peer)
  • [12:35:22] <dm8tbr> mru: for me it makes sense because I have menu that lets me choose the userspace in the initramfs
  • [12:35:29] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) has joined #beagle
  • [12:36:53] <mru> you don't need an initramfs for taht
  • [12:36:54] <mru> that
  • [12:37:17] * aholler (~aholler@p57B20445.dip0.t-ipconnect.de) has joined #beagle
  • [12:37:18] <mru> you should see some of the crazy boot sequences I've constructed over the years
  • [12:40:17] <dm8tbr> mkay
  • [12:40:37] <mru> anything you can do in an initramfs you can do in a real rootfs
  • [12:41:21] <dm8tbr> how would I start a different init binary once I am in an real rootfs?
  • [12:41:28] <mru> exec
  • [12:41:43] <mru> how did you think the initramfs one did it?
  • [12:41:54] <dm8tbr> magic pixie dust!
  • [12:42:16] <mru> as far as the kernel is concerned, it's a perfectly normal rootfs
  • [12:42:37] <mru> there is one situation where it is called for
  • [12:43:03] <mru> bloated distro kernels that can't include drivers for every disk controller imaginable
  • [12:43:38] <mru> they have to build the drivers as modules and load the ones they need
  • [12:43:58] <mru> and the only way to load modules required to mount the rootfs is by using an initrd or initramfs
  • [12:44:21] <mru> if you're building kernels for a specific machine, none of this applies
  • [12:44:53] <mru> ok, I can think of one other reason for using an initramfs
  • [12:44:58] <aholler> for omap it might be the other way around, some drivers might not compile as module. ;)
  • [12:45:00] * niclas (~niclas@nat/ti/x-jtvdccmbqqtwalkk) Quit ()
  • [12:45:15] <mru> it lets you put a minimal system inside the kernel image
  • [12:45:30] <mru> so you can get something "usable" from a single file
  • [12:45:41] <mru> might be useful in certain recovery scenarios and similar
  • [12:45:42] <dm8tbr> yeah, we have a debug shell in our initramfs
  • [12:45:56] * random_ (5bd4b9c2@gateway/web/freenode/ip.91.212.185.194) has joined #beagle
  • [12:47:13] <tasslehoff> what I'm looking for is having a read only rootfs on persistent storage (sd), and I figured living in an initramfs fit the description.
  • [12:47:53] <aholler> for that you don't need an initramfs.
  • [12:48:19] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [12:48:29] <mru> unionfs with a tmpfs seems like a better solution
  • [12:49:55] <aholler> i think aufs is the one to use nowadays
  • [12:50:36] <mru> whatever they call it today
  • [12:51:06] <tasslehoff> hm. never heard of it. another thing to read up on.
  • [12:52:07] <tasslehoff> why does it seem a better solution?
  • [12:52:12] <aholler> it is not needed. when using a readonly-root you just have to take care of the stuff which wants to write to somewhere, e.g. /tmp and /var
  • [12:54:05] <aholler> depending how many stuff you are using this will get time consuming, and using a unionfs will make that unnecessary
  • [12:54:06] * CMoH-notebook (~cipi@unaffiliated/c-moh) Quit (Remote host closed the connection)
  • [12:55:15] <mru> yes, a union mount may or may not be worthwhile
  • [12:55:17] * CMoH-notebook (~cipi@unaffiliated/c-moh) has joined #beagle
  • [12:55:36] <mru> /tmp and /var in tmpfs can be enough
  • [13:00:20] <aholler> for /var in tmpfs you will have to use some mkdir in your init-script because most stuff expects some already existent directories there
  • [13:00:47] <aholler> e.g /var/run
  • [13:01:03] <mru> lib, log, run, tmp should cover it
  • [13:01:19] <mru> and lock
  • [13:02:49] * theholyduck (~holyduck@82.147.59.59) Quit (Ping timeout: 240 seconds)
  • [13:03:45] * tasslehoff listens and learns
  • [13:03:59] <tasslehoff> or rather, reads and tries to learn
  • [13:04:27] <aholler> looking at one of those small live-cd images will feed you with most of what you need.
  • [13:06:01] <aholler> e.g. grml, ltsp.org or the mother of all knoppix.
  • [13:08:50] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera_)
  • [13:10:47] <aholler> but knoppix will be overdosed, it has a development story of 10a and got very complicated if you don't have any experience with that topic
  • [13:11:12] * kanru (~kanru@61-228-158-122.dynamic.hinet.net) has joined #beagle
  • [13:13:11] <mru> livecds are usually much more complicated than what tasslehoff probably needs
  • [13:13:16] <mru> they're built to work on _any_ system
  • [13:14:03] <mru> so they have to include tons of driver modules and fancy hw probing
  • [13:16:30] * ant_work (~andrea@host6-80-static.42-85-b.business.telecomitalia.it) has joined #beagle
  • [13:21:30] * CMoH-notebook (~cipi@unaffiliated/c-moh) Quit (Read error: Connection reset by peer)
  • [13:21:48] * raghum (~raghuveer@192.163.20.231) has joined #beagle
  • [13:23:55] <raghum> can anyone point to link for Beagle XM schematics. The schematic inside the SRM is not clear
  • [13:25:17] * stone2 (~stone@123.147.251.120) Quit (Ping timeout: 264 seconds)
  • [13:25:52] <aholler> ltsp is good for that. the scripts are easy and they don't do fancy autoprobing
  • [13:26:20] <aholler> at least it was so some years ago ;)
  • [13:27:21] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [13:28:54] * BThompson (~a0193480@nat/ti/x-upnlfaxfjzwekskk) has joined #beagle
  • [13:29:55] * rcranetx (~rcranetx@nat/ti/x-vnnconhzogdaynnw) has joined #beagle
  • [13:30:28] <tasslehoff> I compile my rootfs with OE, and I see it has a unionroot/unionfs-utils that seems to handle what I (think I) need.
  • [13:31:25] <tasslehoff> Is it just a matter of initscripts doing a bit of magic and an /etc/fstab that takes care of the directories mru mentioned?
  • [13:34:39] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera_)
  • [13:38:55] <ynezz> tasslehoff: look at openwrt, they use overlays
  • [13:39:38] * stone1 (~stone@211.137.104.71) has joined #beagle
  • [13:39:45] * NishanthMenon (~nmenon@nat/ti/x-stmupjovbcmtzqdc) has joined #beagle
  • [13:40:15] * stone1 (~stone@211.137.104.71) Quit (Remote host closed the connection)
  • [13:40:35] * stone1 (~stone@119.6.72.15) has joined #beagle
  • [13:40:57] * stone1 (~stone@119.6.72.15) has left #beagle
  • [13:45:01] <tasslehoff> thanks. trying to test the kernel+initramfs I already had made here. u-boot by default loads the kernel to 0x80300000. why exactly that address, and when I boot the kernel, how does it know to stay away from that section of the RAM?
  • [13:45:37] <aholler> the kernel will move itself elsewhere, you don't have to take about that
  • [13:45:44] <aholler> take care
  • [13:46:28] <tasslehoff> aholler: ok. will it do the same for my initramfs, or do I need to find a permanent address for that?
  • [13:47:53] <aholler> I don't understand
  • [13:48:56] <aholler> but loading the initramfs to the same position will not work ;)
  • [13:50:27] <tasslehoff> aholler: that much I understand :)
  • [13:51:47] <ynezz> isn't initramfs part of the kernel image already?
  • [13:52:19] <aholler> i would do it so, but it doesn't have to be
  • [13:52:24] <tasslehoff> ynezz: I'm testing an SD-card I made before aholler gave me that advice.
  • [13:52:43] <tasslehoff> it's separate files on this one, and I'm doing the exercise to learn a bit
  • [13:52:48] * ssvb (~ssvb@net-217.nrpn.net) Quit (Quit: Leaving)
  • [13:53:34] <tasslehoff> I suspect I have to load cpio.gz (40MiB) to and address in RAM and set initrd=<that-address>
  • [13:53:52] <tasslehoff> s/and/an/
  • [13:54:20] <ynezz> 40MB? you've gcc in that? :p
  • [13:55:09] <tasslehoff> :)
  • [13:55:49] <aholler> such happens fast, e.g. libqt is about 70mb.
  • [13:55:55] <tasslehoff> I think maybe it's Qt that takes a bit of space..
  • [13:56:00] <tasslehoff> exactly :)
  • [13:56:22] <ynezz> omg
  • [13:57:05] <aholler> it includes a window-manager, x-server and all the stuff needed for a gui.
  • [13:57:33] * NishanthMenon (~nmenon@nat/ti/x-stmupjovbcmtzqdc) Quit (Remote host closed the connection)
  • [13:58:17] <tasslehoff> I've dissected it a bit, stripping away stuff I *know* I don't need, but I will have to revisit to remove stuff I *suspect* I don't need :)
  • [13:59:04] <aholler> you won't get it much smaller. At least I was unsuccessfull to get libqt below 60mb or such.
  • [14:00:10] * DJWillis (djwillis@cpc3-bath5-2-0-cust220.aztw.cable.virginmedia.com) has joined #beagle
  • [14:00:37] * stone1 (~stone@123.147.251.120) has joined #beagle
  • [14:00:51] <aholler> it includes fonts, support for audio, network and all such stuff. fiddling with the tons of options doesn't make sense if not really needed
  • [14:05:30] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) Quit (Quit: peabody124)
  • [14:07:53] * grund (~grund@64.244.156.164) Quit (Ping timeout: 264 seconds)
  • [14:22:05] * drakkan1000 (~drakkan@62.123.237.207) has joined #beagle
  • [14:22:34] * siegen (8d63fefd@gateway/web/freenode/ip.141.99.254.253) has joined #beagle
  • [14:22:44] <siegen> Hi!
  • [14:24:16] * BlInK311 (~ward@ool-44c42324.dyn.optonline.net) has joined #beagle
  • [14:25:49] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [14:25:50] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) has joined #beagle
  • [14:33:07] * mazzanet (~mazzanet@hpavc/mazzanet) Quit (Ping timeout: 240 seconds)
  • [14:34:09] * mazzanet (~mazzanet@fe1-1.mel-ii.bdr1.mazzanet.id.au) has joined #beagle
  • [14:34:09] * mazzanet (~mazzanet@fe1-1.mel-ii.bdr1.mazzanet.id.au) Quit (Changing host)
  • [14:34:09] * mazzanet (~mazzanet@hpavc/mazzanet) has joined #beagle
  • [14:34:18] <siegen> ey guys! you know how i have to get spi in /dev
  • [14:34:26] <siegen> i'm bit lost
  • [14:42:13] <ynezz> touch /dev/spi ?
  • [14:42:42] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera_)
  • [14:46:06] <siegen> i dont see nothing of spi in /dev.....doing ....ls | grep spi
  • [14:46:21] <siegen> or dmesg | grep spi
  • [14:46:56] * Sept (~bakljg@c-24-118-98-245.hsd1.mn.comcast.net) Quit (Ping timeout: 255 seconds)
  • [14:47:31] * grund (~grund@host65-17-84-58.birch.net) has joined #beagle
  • [14:47:49] * emeb|mac (~ericb@ip72-223-92-88.ph.ph.cox.net) has joined #beagle
  • [14:48:03] <siegen> i dont see nothing in /sys/bus/spi/devices neither
  • [14:49:35] <siegen> but i have this /sys/bus/spi/drivers/spidev i think this is the driver for spi
  • [14:51:00] <aholler> maybe you just don't have any devices which are using spi
  • [14:52:24] <siegen> i want to use the accelerometer adxl345 by SPI
  • [14:53:12] <siegen> my info what i have is: BB RevC/X-Loader 1.4.4ss /U-Boot 2010.03/Kernel 2.6.32/image: Angstrom-GNOME-image-glibc-ipk-2010.7-test-20101020-beagleboard.rootfs
  • [14:54:08] <siegen> and i dont know exactly i have pinMux, kernel config, ... correctly for this task in this rootfs
  • [14:54:15] <aholler> than you have to include that driver, maybe modify it to use the correct spi device and anounce that the driver uses spi in your board-specific source.
  • [14:54:28] <tasslehoff> I took a guess at booting with initramfs, but http://pastebin.com/SmsCMV52 was apparently the wrong guess.
  • [14:54:48] <aholler> siegen: so you will have to become a "kernel-hacker"
  • [14:54:55] <siegen> hehehe
  • [14:54:59] <siegen> :S
  • [14:55:47] <siegen> i really would like but i am working in a project on deadline :S
  • [14:56:20] <aholler> if you don't have the time declare the project as dead
  • [14:56:25] <siegen> nooo
  • [14:56:49] <aholler> or find someone which will do the necessary stuff for you
  • [14:57:00] <siegen> but i have read a lott
  • [14:57:13] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) Quit (Quit: peabody124)
  • [14:57:15] <siegen> just i have some lacks in linux knowledge
  • [14:57:22] <siegen> :(
  • [14:58:40] <aholler> have a look at some source for boards which are using adxl345 might help
  • [14:59:41] <siegen> i think just the problem i have is to show up spi into /dev
  • [14:59:47] <aholler> if a driver for that chip already exists. if not, look at the driver of another accel
  • [14:59:58] <aholler> no
  • [15:00:21] <siegen> i got work the accelerometer by i2c with th bb
  • [15:00:44] <aholler> you must give the kernel the clue, that your board includes that accelerometer and you have to supply a driver
  • [15:00:46] <siegen> but the problem i had to connect 12 accel and this accel only allows two addresses
  • [15:00:52] <siegen> so i had to look for sPI
  • [15:01:21] <siegen> i also design a multiplexer circuit to multiplex the buses for every accelerom
  • [15:01:36] <siegen> but my boss doesnt want that extra circuit
  • [15:01:40] <koen> Crofton|work: why are you reintroducting legac staging ?!?!
  • [15:01:43] <siegen> so my option should be spi
  • [15:01:49] <Crofton|work> crap
  • [15:01:58] <Crofton|work> I was affeared of that
  • [15:02:13] <Crofton|work> this is what happens when you are in a hurry
  • [15:02:21] * brijesh (~Brijesh@nat/ti/x-htokgxsgqvvkxzbi) has joined #beagle
  • [15:04:40] <aholler> siegen: just git grep the linux source for another driver which uses the spi-driver for the beagleboard
  • [15:05:10] <aholler> and use that as a template
  • [15:06:28] * karlo45 (c297dbfb@gateway/web/freenode/ip.194.151.219.251) has joined #beagle
  • [15:06:37] * kanru (~kanru@61-228-158-122.dynamic.hinet.net) Quit (Ping timeout: 265 seconds)
  • [15:06:44] <aholler> using some websearch will help too, e.g. http://elinux.org/BeagleBoard/SPI
  • [15:06:51] <siegen> i read already
  • [15:06:52] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [15:07:02] <siegen> and most mailing list about this toic
  • [15:07:12] <siegen> i have a linux source
  • [15:07:22] * emeb|mac (~ericb@ip72-223-92-88.ph.ph.cox.net) Quit (Ping timeout: 250 seconds)
  • [15:07:32] <karlo45> Hello people :). I bought a "beagleboard xM rev B". What OMAP version is this, eg. what ubuntu image should I download? :)
  • [15:07:46] <siegen> and i have to modify the mode on some pins in the expansion header that i have to recompile u-boot
  • [15:08:03] <av500> you dont need to recompile uboot to change the mode
  • [15:08:12] <siegen> then i have to change in the kernel in mux.h and mux.c and menuconfig and recompile
  • [15:08:19] <siegen> i think :S
  • [15:08:28] <av500> yes
  • [15:08:36] <siegen> aha
  • [15:08:42] <siegen> i dont need to recompile to change the mode
  • [15:08:44] <siegen> ??
  • [15:08:46] <av500> as said before, find another kernel driver that uses SPI
  • [15:08:52] * peabody124 (~peabody12@99-63-106-203.lightspeed.hstntx.sbcglobal.net) has joined #beagle
  • [15:08:58] <av500> e.g. the ethernet on the zippy uses spi
  • [15:10:12] <aholler> cd ..
  • [15:10:14] <aholler> uups
  • [15:10:42] <siegen> av500: how can i find another kernel driver if i take a look here /sys/bus/spi/drivers
  • [15:10:44] <siegen> i see
  • [15:11:11] <siegen> enc28j60 ks8851 and spidev
  • [15:12:11] <siegen> i was reading in the mailing list about this and some people have troubles to get spidev on /dev
  • [15:12:15] <aholler> use "git grep accelerometer" on the linux source, e.g. adis16209 seems to use spi too
  • [15:12:42] <koen> the mailinglist also has *multiple* step by step howtos on how to test spidev and loopback
  • [15:14:04] <aholler> or drivers/input/misc/adxl34x.c might be a good start
  • [15:14:32] * nc_ (~davidunga@timesys-gw0.cust.expedient.net) has joined #beagle
  • [15:14:40] <av500> or the ethernet driver for the zippx
  • [15:14:41] <av500> or the ethernet driver for the zippy
  • [15:14:43] <nc_> Good morning friends and comrades
  • [15:14:47] * prpplague (~danders@nat/ti/x-ghnzvzymatffybmh) has joined #beagle
  • [15:14:55] <nc_> Nice to see you again av500, how have you been
  • [15:15:11] <av500> mixed
  • [15:15:29] * av500 just cleared google tv shipment with customs
  • [15:15:39] <nc_> Very cool
  • [15:16:21] <nc_> I entered this morning to ask about hardware accelerated video decoding, with the TI DVSDK on the Beagle xM
  • [15:16:23] * peabody124_ (~peabody12@99-63-106-203.lightspeed.hstntx.sbcglobal.net) has joined #beagle
  • [15:16:25] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Remote host closed the connection)
  • [15:16:36] * denix (~denys@nat/ti/x-jbeqqcjhvoktcgdo) has joined #beagle
  • [15:16:45] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [15:17:02] * theholyduck (~holyduck@82.147.59.59) has joined #beagle
  • [15:17:12] <siegen> thanks people but i dont understand some of your suggestions
  • [15:17:14] * karlo45 (c297dbfb@gateway/web/freenode/ip.194.151.219.251) Quit (Ping timeout: 265 seconds)
  • [15:17:25] <siegen> i think i have to spend more time learning linux
  • [15:18:22] <siegen> i will go back to the mailing lists
  • [15:18:34] <siegen> thanksss :)
  • [15:18:54] <aholler> siegen: you have to write a driver, so modify an existing accelerometer-driver looks like a good idea
  • [15:19:11] <nc_> I recommend the LDD book
  • [15:19:19] <nc_> Not that I know what you are talking about
  • [15:19:28] * peabody124 (~peabody12@99-63-106-203.lightspeed.hstntx.sbcglobal.net) Quit (Ping timeout: 276 seconds)
  • [15:20:25] <nc_> So have any of you fine beagle enthusiasts successfully used the TIDmaiVideoSink
  • [15:20:52] <nc_> I know the Angstrom distribution has some better omap video sink, but I am not on Angstrom and am unable to switch to it
  • [15:22:03] <siegen> ok
  • [15:22:17] <siegen> thanks aholler i will investigate in that direction
  • [15:28:12] * ghexpert (~ghexpert@87-194-17-20.bethere.co.uk) has joined #beagle
  • [15:28:25] * peabody124_ (~peabody12@99-63-106-203.lightspeed.hstntx.sbcglobal.net) Quit (Ping timeout: 255 seconds)
  • [15:31:13] * ghexpert (~ghexpert@87-194-17-20.bethere.co.uk) has left #beagle
  • [15:34:30] * emeb (~ericb@ip72-223-92-88.ph.ph.cox.net) has joined #beagle
  • [15:35:55] * peabody124 (~peabody12@99.63.106.203) has joined #beagle
  • [15:37:04] * stone1 (~stone@123.147.251.120) Quit (Ping timeout: 265 seconds)
  • [15:46:58] * katie_ (~katierh@nat/ti/x-guiextejrstenxmj) Quit ()
  • [15:48:18] * NishanthMenon (~nmenon@nat/ti/x-wjvdlhfxyqxmjezb) has joined #beagle
  • [15:48:48] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) Quit (Quit: leaving)
  • [15:51:17] * ssvb (~ssvb@a88-114-220-213.elisa-laajakaista.fi) has joined #beagle
  • [15:51:35] * stone1 (~stone@123.147.251.120) has joined #beagle
  • [15:56:17] * random_ (5bd4b9c2@gateway/web/freenode/ip.91.212.185.194) Quit (Quit: Page closed)
  • [15:56:26] * stone1 (~stone@123.147.251.120) Quit (Remote host closed the connection)
  • [16:01:27] * Zoxc (Zoxc@ti0128a380-dhcp0526.bb.online.no) has joined #beagle
  • [16:02:04] * peabody124 (~peabody12@99.63.106.203) Quit (Quit: peabody124)
  • [16:04:10] * GPSFan (~kenm@64.92.145.112) has joined #beagle
  • [16:04:12] * alancam (~a-campbel@nat/ti/x-mxfpohuajjgrbpyc) has joined #beagle
  • [16:07:23] * jpirko (~jirka@nat/redhat/x-gepmuwvhqdvobpyn) Quit (Quit: Leaving)
  • [16:09:35] * denix (~denys@nat/ti/x-jbeqqcjhvoktcgdo) Quit (Remote host closed the connection)
  • [16:10:25] * torez (~torez@cpe-70-123-140-186.austin.res.rr.com) has joined #beagle
  • [16:11:17] * denix (~denys@nat/ti/x-pxshwqucigbytldf) has joined #beagle
  • [16:13:32] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Remote host closed the connection)
  • [16:15:55] * jayabharath (~jayabhara@nat/ti/x-qrhmpsdegekiibgv) has joined #beagle
  • [16:27:05] * denix (~denys@nat/ti/x-pxshwqucigbytldf) Quit (Ping timeout: 264 seconds)
  • [16:27:06] * peabody124 (~peabody12@128.249.96.21) has joined #beagle
  • [16:27:22] * denix (~denys@nat/ti/x-ihtqntjfmreiasvl) has joined #beagle
  • [16:41:32] * virals (~viral@122.179.41.194) has joined #beagle
  • [16:44:53] * JaMa|Wrk (~martin@161-24.13.24.78.awnet.cz) has joined #beagle
  • [16:47:35] * _roger_ (~a0740758@nat/ti/x-yefyhvyjltecsrqc) Quit (Quit: Leaving.)
  • [16:47:42] * prpplague (~danders@nat/ti/x-ghnzvzymatffybmh) Quit (Quit: Leaving)
  • [16:49:20] * jonpry (~jonpry@63.245.31.4) Quit (Ping timeout: 255 seconds)
  • [16:50:25] * denix (~denys@nat/ti/x-ihtqntjfmreiasvl) Quit (Ping timeout: 260 seconds)
  • [16:51:21] * JaMa|Wrk is now known as JaMa|Off
  • [16:52:32] * denix (~denys@nat/ti/x-cvyrmnmacprwrsxz) has joined #beagle
  • [16:58:44] * wcklyaditya (401acd64@gateway/web/freenode/ip.64.26.205.100) Quit (Ping timeout: 265 seconds)
  • [17:01:20] * denix (~denys@nat/ti/x-cvyrmnmacprwrsxz) Quit (Remote host closed the connection)
  • [17:02:14] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [17:05:44] * prpplague (~danders@nat/ti/x-wzdijqbiakhofecy) has joined #beagle
  • [17:11:54] * alancam (~a-campbel@nat/ti/x-mxfpohuajjgrbpyc) Quit (Ping timeout: 260 seconds)
  • [17:17:14] * prpplague (~danders@nat/ti/x-wzdijqbiakhofecy) Quit (Quit: Leaving)
  • [17:17:18] * alextisserant (~alextisse@c-67-180-181-51.hsd1.ca.comcast.net) has joined #beagle
  • [17:17:20] * ant_work (~andrea@host6-80-static.42-85-b.business.telecomitalia.it) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.13/20101203075014])
  • [17:22:15] * djlewis (~djlewis@75.15.65.246) Quit (Quit: Leaving.)
  • [17:23:29] * jayabharath (~jayabhara@nat/ti/x-qrhmpsdegekiibgv) Quit (Ping timeout: 264 seconds)
  • [17:31:16] * kevinsc1 (~a0214685@nat/ti/x-hrepjpwxbjhgnvtb) has joined #beagle
  • [17:31:40] * kevinsc (~a0214685@nat/ti/x-jinqnbkzfjuelqfr) Quit (Ping timeout: 250 seconds)
  • [17:37:33] * denix (~denys@nat/ti/x-kzepyqcgdlloppxy) has joined #beagle
  • [17:39:43] * mrj10 (~mrj10@63.252.64.254) Quit (Quit: Leaving.)
  • [17:39:44] * alancam (~a-campbel@nat/ti/x-drboolpmnxavkzhu) has joined #beagle
  • [17:39:51] * nc_ (~davidunga@timesys-gw0.cust.expedient.net) has left #beagle
  • [17:43:07] * naeg (~naeg@194.208.239.170) Quit (Ping timeout: 276 seconds)
  • [17:44:21] * siegen (8d63fefd@gateway/web/freenode/ip.141.99.254.253) Quit (Quit: Page closed)
  • [17:44:32] * denix (~denys@nat/ti/x-kzepyqcgdlloppxy) Quit (Remote host closed the connection)
  • [17:52:00] * denix (~denys@nat/ti/x-vurvjbkuawbacuab) has joined #beagle
  • [17:52:13] * DarrenE (~darreneth@nat/ti/x-opkuymvljosonmmk) has joined #beagle
  • [17:52:48] * mcgeagh (~mcgeagh@xbmc/staff/mcgeagh) Quit (Quit: Ex-Chat)
  • [17:54:07] * Mike (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [17:54:12] * floholl (~flo@cpc2-belf2-0-0-cust482.2-1.cable.virginmedia.com) has joined #beagle
  • [17:54:33] * Mike is now known as Guest20147
  • [17:57:31] * rsalveti (~rsalveti@201.82.72.47) Quit (Ping timeout: 240 seconds)
  • [17:57:36] * rsalveti (~rsalveti@201.82.72.47) has joined #beagle
  • [18:00:39] * mctouch (~mctouch@cpc5-sgyl27-2-0-cust167.sgyl.cable.virginmedia.com) has joined #beagle
  • [18:01:24] * virals (~viral@122.179.41.194) has left #beagle
  • [18:02:07] * alextisserant (~alextisse@c-67-180-181-51.hsd1.ca.comcast.net) Quit (Quit: alextisserant)
  • [18:07:17] * denix (~denys@nat/ti/x-vurvjbkuawbacuab) Quit (Ping timeout: 264 seconds)
  • [18:09:01] * denix (~denys@nat/ti/x-kgluwcvtgrmujycg) has joined #beagle
  • [18:10:21] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
  • [18:13:06] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Remote host closed the connection)
  • [18:13:08] * kevinsc1 (~a0214685@nat/ti/x-hrepjpwxbjhgnvtb) Quit (Ping timeout: 255 seconds)
  • [18:13:15] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
  • [18:13:24] * kevinsc (~a0214685@nat/ti/x-ndbugubfxzzerock) has joined #beagle
  • [18:14:26] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [18:15:50] * AmosSam (~amossam@78-2-136-159.adsl.net.t-com.hr) has joined #beagle
  • [18:16:05] <AmosSam> hey everybody
  • [18:16:34] <AmosSam> i'm searching a shop in germany to buy bb, and i found two...
  • [18:18:13] <AmosSam> but, on one page it says that manufacturer is beagleboard, and on other one says it's circuitco electronics llc
  • [18:18:31] <AmosSam> are those the same boards or?
  • [18:18:37] * drakkan1000 (~drakkan@62.123.237.207) Quit (Remote host closed the connection)
  • [18:18:49] <AmosSam> images looks indentical!!
  • [18:20:14] * mazzanet (~mazzanet@hpavc/mazzanet) Quit (Ping timeout: 255 seconds)
  • [18:20:45] <mru> circuitco makes the beagles
  • [18:21:12] * mazzanet (~mazzanet@hpavc/mazzanet) has joined #beagle
  • [18:22:48] <AmosSam> so, on one page writes incorrectly?
  • [18:23:20] * CMoH-notebook (~cipi@95.76.74.1) has joined #beagle
  • [18:23:20] * CMoH-notebook (~cipi@95.76.74.1) Quit (Changing host)
  • [18:23:20] * CMoH-notebook (~cipi@unaffiliated/c-moh) has joined #beagle
  • [18:24:17] * _koen_ (~x0115699@nat/ti/x-bgvftexesrpbjphk) has joined #beagle
  • [18:25:00] <AmosSam> ok, and i have to wait 10 weeks for shipment... :(
  • [18:26:54] * kunguz (~Kaan@88.246.21.208) has joined #beagle
  • [18:31:45] <djlewis_> sounds like they are not in stock
  • [18:38:22] <AmosSam> yea... :/
  • [18:40:33] <BlInK311> which BB are u looking for? just wondering..
  • [18:43:55] * jkridner|work (~a0321898@nat/ti/x-dtzkaiqhcyperbkz) has joined #beagle
  • [18:44:05] <AmosSam> xM
  • [18:44:16] <AmosSam> newer, stronger...
  • [18:44:49] <AmosSam> mostly beacuse secondary os on usb will be debian or gentoo...
  • [18:48:28] * jkridner|work (~a0321898@nat/ti/x-dtzkaiqhcyperbkz) Quit (Ping timeout: 265 seconds)
  • [18:51:03] * heathkid (~heathkid2@68-31-164-243.pools.spcsdns.net) has joined #beagle
  • [18:51:19] * heathkid (~heathkid2@68-31-164-243.pools.spcsdns.net) has left #beagle
  • [18:52:32] * jake_ (d1b0f0dc@gateway/web/freenode/ip.209.176.240.220) has joined #beagle
  • [18:53:27] * BlInK311 (~ward@ool-44c42324.dyn.optonline.net) Quit (Quit: Leaving)
  • [18:54:08] <jake_> Would anyone be interested in getting paid to write a beagle WiFi application?
  • [18:54:44] <AmosSam> what type of app?
  • [18:55:53] <jake_> A simple test app to determine if the WL1271 WiFi module was connected or not. Essentially we want to determine if the SDIO communications to the WL1271 module is working.
  • [18:56:35] <AmosSam> low level app? i'll pass, thx. :D
  • [18:56:57] * kunguz (~Kaan@88.246.21.208) Quit (Read error: Connection reset by peer)
  • [18:57:11] * kunguz (~Kaan@88.246.21.208) has joined #beagle
  • [18:57:29] * courville (~courville@archos.rain.fr) Quit (Ping timeout: 260 seconds)
  • [18:57:54] * jrmuizel (~jrmuizel@66.207.206.180) has joined #beagle
  • [19:00:42] * AmosSam (~amossam@78-2-136-159.adsl.net.t-com.hr) Quit (Quit: Bye)
  • [19:00:43] * jake_ (d1b0f0dc@gateway/web/freenode/ip.209.176.240.220) Quit (Quit: Page closed)
  • [19:03:24] <aholler> thats the one used o the pandaboard
  • [19:04:11] <aholler> so just have a look there, they already have a driver
  • [19:07:07] * omarrmz (~x0084701@nat/ti/x-hxarmgbkrgofgznr) has joined #beagle
  • [19:16:16] * alextisserant (~alextisse@c-69-181-223-70.hsd1.ca.comcast.net) has joined #beagle
  • [19:29:20] * BlInK311 (~ward@ool-44c42324.dyn.optonline.net) has joined #beagle
  • [19:35:12] * ctyler-testing (~chris@142.204.133.14) has joined #beagle
  • [19:35:15] * Guest20147 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Ping timeout: 245 seconds)
  • [19:35:21] * ctyler-testing (~chris@142.204.133.14) Quit (Remote host closed the connection)
  • [19:42:28] * rodrigo_golive (c8bab803@gateway/web/freenode/ip.200.186.184.3) Quit (Quit: Page closed)
  • [19:44:29] * BThompson (~a0193480@nat/ti/x-upnlfaxfjzwekskk) Quit (Ping timeout: 240 seconds)
  • [19:45:29] * kunguz (~Kaan@88.246.21.208) Quit (Remote host closed the connection)
  • [19:48:59] * kunguz (~Kaan@88.246.21.208) has joined #beagle
  • [19:50:31] * BThompson (~a0193480@nat/ti/x-qianjqabylautbcb) has joined #beagle
  • [19:55:40] * florian (~fuchs@sign-4d091c94.pool.mediaWays.net) has joined #beagle
  • [19:55:40] * florian (~fuchs@sign-4d091c94.pool.mediaWays.net) Quit (Changing host)
  • [19:55:40] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [19:59:29] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Ping timeout: 264 seconds)
  • [20:00:31] * djlewis_1 (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
  • [20:01:09] * Mike (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [20:01:35] * Mike is now known as Guest76514
  • [20:03:03] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) Quit (Quit: leaving)
  • [20:10:07] * kunguz (~Kaan@88.246.21.208) Quit (Remote host closed the connection)
  • [20:14:39] * ninksink (~ninksink@66.90.18.146) has joined #beagle
  • [20:14:52] * ninksink (~ninksink@66.90.18.146) Quit (Client Quit)
  • [20:15:01] * ninksink (~ninksink@66.90.18.146) has joined #beagle
  • [20:19:07] * floholl (~flo@cpc2-belf2-0-0-cust482.2-1.cable.virginmedia.com) Quit (Quit: Leaving)
  • [20:21:21] * djlewis_1 (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Ping timeout: 272 seconds)
  • [20:23:09] * theholyduck (~holyduck@82.147.59.59) Quit (Ping timeout: 240 seconds)
  • [20:26:16] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) has joined #beagle
  • [20:27:03] * theholyduck (~holyduck@82.147.59.59) has joined #beagle
  • [20:30:43] * rick_ (~rick@118-160-38-129.dynamic.hinet.net) Quit (Ping timeout: 240 seconds)
  • [20:31:14] * rick_ (~rick@118-160-42-243.dynamic.hinet.net) has joined #beagle
  • [20:33:27] * chase (~chase@nat/ti/x-ffqjgosxzjyznhal) has joined #beagle
  • [20:42:48] * katie (~katierh@nat/ti/x-hdoyfvbgxhtvwapo) has joined #beagle
  • [20:45:05] * dl9pf_ (~quassel@p5B215626.dip.t-dialin.net) has joined #beagle
  • [20:46:17] * dl9pf (~quassel@opensuse/member/dl9pf) Quit (Ping timeout: 264 seconds)
  • [20:46:19] * BlInK311 (~ward@ool-44c42324.dyn.optonline.net) Quit (Ping timeout: 240 seconds)
  • [20:52:04] * Jefro (~jefro@cust-67-203-89-34.static.o1.com) has left #beagle
  • [20:52:15] * Jefro (~jefro@cust-67-203-89-34.static.o1.com) has joined #beagle
  • [20:52:36] <Jefro> who feels like answering a silly question?
  • [20:53:54] <Jefro> tough crowd
  • [20:54:07] <Jefro> is this correct: on the beagleboard, the OTG (EHCI) is the mini-A port, and the musb port is the "normal" standard A port
  • [20:54:22] <_av500_> no
  • [20:54:35] <_av500_> musb is otg
  • [20:54:36] <_av500_> is minia
  • [20:54:46] <_av500_> is mini A
  • [20:54:52] <_av500_> ehci is the std A
  • [20:55:05] <ds2> NO!
  • [20:55:07] <Jefro> ok, thanks - that makes more sense
  • [20:55:11] <ds2> mini AB
  • [20:55:31] <ds2> OTG by definition has to be an AB jack
  • [20:55:33] * gustavoz (~gustavoz@host79.201-252-22.telecom.net.ar) Quit (Quit: Leaving)
  • [20:57:00] <Jefro> thanks ds2
  • [20:57:01] * _koen_ (~x0115699@nat/ti/x-bgvftexesrpbjphk) Quit (Quit: Leaving.)
  • [20:58:01] <_av500_> ds2: yes, mini ab
  • [21:02:29] <aholler> oh, can I ask the question if someone knows why an 100mA device connected over std a <-> mini a might fail? the usb-connection breaks when the firmware will be transmitted, means during the first traffic over musb
  • [21:03:27] <aholler> I'm awaiting some simple answer like use that patch or disable dma ;)
  • [21:03:52] <_av500_> fails how?
  • [21:05:09] <Crofton|work> _av500_, based on your sd card work, how do you partition the card?
  • [21:05:54] <aholler> -101 as rc for usb_bulk_msg if I remember correctly
  • [21:07:03] <aholler> -ETIMEOUT
  • [21:07:24] <aholler> was that, so I don't know if the device died because of low power or whatever
  • [21:07:46] <aholler> kernel was 2.6.37-rc4+
  • [21:08:59] <_av500_> Crofton|work: using sectors
  • [21:09:18] <_av500_> and making sure that fat part has even number of them
  • [21:09:31] <_av500_> in fact, thats not fully true
  • [21:10:07] <_av500_> it also depends on the number of reserved sectors mkdosfs uses
  • [21:10:24] <_av500_> i dont know the default value
  • [21:12:13] * mrc3_ (~mrc3@nat/ti/x-itwbreywqcyteavh) has joined #beagle
  • [21:12:14] <aholler> using fat16 proved to be good here ;)
  • [21:12:45] <_av500_> same thing, reseved sectors exist
  • [21:13:09] <_av500_> but i think the default value is ok
  • [21:13:17] <aholler> i don't really know about what you are talking ;)
  • [21:13:26] <_av500_> just ignore it
  • [21:14:46] <aholler> means I know about reserved sectors, but i don't know about your sd-card-work ;)
  • [21:14:56] <_av500_> its on the ml
  • [21:16:11] <aholler> hmm, maybe I should post my musb-problem on the ml.
  • [21:16:39] <aholler> just though it might be a good time to ask here
  • [21:22:14] * gustavoz (~gustavoz@host188.190-231-136.telecom.net.ar) has joined #beagle
  • [21:23:56] * grund (~grund@host65-17-84-58.birch.net) Quit (Ping timeout: 250 seconds)
  • [21:25:13] * PBansal (~pbansal@nat/ti/x-jtizdvjmjwlhnnan) has joined #beagle
  • [21:30:54] * jluxenberg (~jared@174-31-133-171.tukw.qwest.net) Quit (Ping timeout: 260 seconds)
  • [21:33:48] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
  • [21:35:30] * jonpry (~jonpry@63.245.31.4) has joined #beagle
  • [21:42:17] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [21:44:10] * rcn-ee_at_work (~voodoo@thief-statics-245.mncable.net) has joined #beagle
  • [21:45:19] <rcn-ee_at_work> Dan__, ping
  • [21:46:19] <cwillu> Request timed out.
  • [21:47:00] <cwillu> 1 packets transmitted, 0 received, 100% packet loss, time 60000ms
  • [21:49:05] * Guest76514 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Quit: Leaving)
  • [21:55:50] * rcranetx (~rcranetx@nat/ti/x-vnnconhzogdaynnw) Quit (Quit: Leaving.)
  • [21:57:12] <aholler> ah, mefoo
  • [21:59:45] <aholler> omg, never realialised the funny names people are using on the ml. ;)
  • [22:00:31] * gustavoz (~gustavoz@host188.190-231-136.telecom.net.ar) Quit (Quit: Leaving)
  • [22:04:40] <Jefro> rcn-ee_at_work - I believe I have Dan__'s email if you need it
  • [22:05:16] <rcn-ee_at_work> that's okay i do too in my xchat window at home...
  • [22:06:09] * DarrenE (~darreneth@nat/ti/x-opkuymvljosonmmk) Quit (Ping timeout: 265 seconds)
  • [22:07:10] <djlewis_> aholler: what about here on #beagle ;)
  • [22:07:53] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [22:20:11] <aholler> djlewis_: nicks are mandatory, and real names are not that obvious visible. but on ml's I've seldom saw that much funny names, at least not on the ones I've subscribed to
  • [22:21:19] * ogra (~ogra@ubuntu/member/ogra) Quit (Read error: Operation timed out)
  • [22:25:07] <aholler> might be the case because it's a googlegroup and not real ml.
  • [22:25:15] * ogra (~ogra@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  • [22:25:41] * ogra is now known as Guest62388
  • [22:25:41] <aholler> i assume there exists some funny webgui to post message
  • [22:26:01] <_av500_> yes
  • [22:26:30] <Dan__> hey i'm here
  • [22:28:38] <AlTheKiller> Any kernel gods around?
  • [22:28:53] <_av500_> there probably is no god
  • [22:29:07] <Dan__> rcn-ee is close though :)
  • [22:29:20] <AlTheKiller> I'm having trouble getting the irq detected for a tsc2007.
  • [22:29:32] <AlTheKiller> Of course there's no god :)
  • [22:29:37] <AlTheKiller> Just kernel gods.
  • [22:29:45] <rcn-ee_at_work> Hey Dan__ i updated the dsp section on elinux... give it a try, there's that one error from dmesg i haven't figured out that's stopping us...
  • [22:31:14] <Dan__> this section? http://www.elinux.org/BeagleBoard_Ubuntu_%26_DSP_From_Sources#DSP
  • [22:33:05] <_av500_> rcn-ee_at_work: what error?
  • [22:33:23] <rcn-ee_at_work> Dan__, http://elinux.org/BeagleBoardUbuntu#Work_In_Progress
  • [22:33:42] <rcn-ee_at_work> _av500_, " bridge_brd_start: Failed to get dsp mailbox handle" with dspbridge..
  • [22:34:11] <Dan__> does that error impact functionality?
  • [22:34:22] <_av500_> i would guess so
  • [22:34:45] <rcn-ee_at_work> yeah, mailbox does a lot of the message communication.. so yeah..
  • [22:35:24] <aholler> AlTheKiller: if you don't specify your question, I assume nobody will or can answer
  • [22:35:46] <_av500_> rcn-ee_at_work: there are two drivers to load afaik
  • [22:35:47] <AlTheKiller> Yeah yeah, sec. I'm pastebinning the code
  • [22:35:59] <Dan__> aww
  • [22:36:01] <_av500_> dspbridge
  • [22:36:06] <_av500_> and bridgedriver
  • [22:37:40] <AlTheKiller> OK so trying to hang a tsc2007 off i2c-3. I've confirmed that that the tsc2007 is generating the interrupt signal but I get nothing in /proc/interrupts.
  • [22:37:55] <AlTheKiller> Here's the relevant bits of my board config... http://nopaste.linux-dev.org/?9390
  • [22:38:00] <_av500_> AlTheKiller: irq is on a gpio?
  • [22:38:07] <AlTheKiller> _av500_: Yup
  • [22:38:30] <_av500_> can you read the gpio from the kernel at least?
  • [22:40:03] <AlTheKiller> You mean just with gpio_get_value?
  • [22:40:22] <AlTheKiller> Or is there a sys/procfs file for that?
  • [22:40:24] <_av500_> yes
  • [22:40:28] <AlTheKiller> Sorry, a bit green here.
  • [22:41:02] <aholler> your init is called?
  • [22:41:07] <AlTheKiller> Yes
  • [22:42:35] * ninksink (~ninksink@66.90.18.146) Quit (Ping timeout: 272 seconds)
  • [22:44:19] <AlTheKiller> _av500_: testing, will be a few.
  • [22:48:27] <AlTheKiller> _av500_: Yes I can read the gpio pin.
  • [22:48:32] <rcn-ee_at_work> _av500_, yeah, that's the way it use to be, in 2.6.37-rc's dspbridge was changed to dsp and set to "obj-y" so it's builtin..
  • [22:48:42] * mctouch (~mctouch@cpc5-sgyl27-2-0-cust167.sgyl.cable.virginmedia.com) Quit (Quit: Leaving...)
  • [22:50:24] <_av500_> ic
  • [22:50:41] * kevinsc (~a0214685@nat/ti/x-ndbugubfxzzerock) Quit (Quit: Leaving.)
  • [22:50:54] <_av500_> rcn-ee_at_work: i use what in the android releases and thats at 32 atm
  • [22:51:06] * ssvb (~ssvb@a88-114-220-213.elisa-laajakaista.fi) Quit (Ping timeout: 265 seconds)
  • [22:51:48] <aholler> AlTheKiller: looks there is missing a request_irq and such, have a look at gpio_keys.c
  • [22:52:16] * ssvb (~ssvb@a88-114-220-213.elisa-laajakaista.fi) has joined #beagle
  • [22:52:32] * perry__ (48c84f1a@gateway/web/freenode/ip.72.200.79.26) Quit (Quit: Page closed)
  • [22:52:38] <AlTheKiller> aholler: The tsc2007 does it.
  • [22:52:45] <AlTheKiller> *tsc2007 driver
  • [22:53:23] <aholler> ah, ok.
  • [22:53:27] <AlTheKiller> I get an entry in /proc/interrupts, its value just never updates.
  • [22:54:32] <aholler> than maybe an enable_irq is missing ;)
  • [22:55:31] <AlTheKiller> Let's see...
  • [22:57:41] <Dan__> rcn-ee: i'm properly loading the modules now. Now i'll take a look at DSP :)
  • [23:01:58] * Crazymik3 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [23:02:10] <_av500_> good luck
  • [23:02:16] <Dan__> ok i'm having some errors running create_dsp_package
  • [23:02:53] <rcn-ee_at_work> Dan__, which errors? did you do a "bzr pull" i pushed large number of updates for that script.. ;)
  • [23:03:13] <Dan__> http://pastebin.com/krFmupWE
  • [23:03:16] <Dan__> line 177
  • [23:03:37] <rcn-ee_at_work> yeap, that's gone... do a bzr pull all that old userspace stuff is gone..
  • [23:03:38] <Dan__> oh it's "bzr pull", not "bzr update"
  • [23:03:45] <Dan__> my bad haha
  • [23:03:50] <rcn-ee_at_work> it happens. ;)
  • [23:04:09] <AlTheKiller> Looks like enable_irq is called.
  • [23:04:17] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) Quit (Ping timeout: 264 seconds)
  • [23:06:18] <aholler> than someone else must help further, I haven't played with tsc2007 up to now
  • [23:06:37] <AlTheKiller> Ok, thanks so far.
  • [23:06:55] * marcheu (~marcheu@annarchy.freedesktop.org) Quit (Ping timeout: 245 seconds)
  • [23:07:04] <aholler> don't know if you have to define something like which edge or such
  • [23:07:27] <AlTheKiller> Well I mean I'm not writing the tsc2007 driver.
  • [23:07:35] <AlTheKiller> I figure that side is reasonably solid.
  • [23:07:35] * marcheu (~marcheu@annarchy.freedesktop.org) has joined #beagle
  • [23:08:47] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera_)
  • [23:10:20] <_av500_> AlTheKiller: but who does pinmux?
  • [23:10:36] <AlTheKiller> Well, I did that.
  • [23:11:13] <AlTheKiller> MUX_CFG_34XX("AF4_34XX_GPIO135", 0x162,
  • [23:11:14] <AlTheKiller> OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
  • [23:11:27] <AlTheKiller> That's what I've got
  • [23:11:27] <_av500_> ok
  • [23:11:38] <_av500_> and to make it an irq?
  • [23:11:45] <_av500_> is that defined in pinmux?
  • [23:11:47] <_av500_> i foergot
  • [23:12:07] <AlTheKiller> Don't think so.
  • [23:12:14] <_av500_> ok
  • [23:15:25] <aholler> av500: are you using rpms or do you compile meego by yourself? I've started to compile some meego-repos but haven't found a good list what is really needed or at least a small explanation about what is used for what ;)
  • [23:16:49] <aholler> at least not when I've looked at meego the last time (about 1-2 month ago).
  • [23:19:57] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Ping timeout: 272 seconds)
  • [23:20:24] * rcn-ee_at_work (~voodoo@thief-statics-245.mncable.net) Quit (Quit: Leaving)
  • [23:23:28] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) has joined #beagle
  • [23:25:31] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Quit: Leaving.)
  • [23:33:07] * JaMa|Off is now known as JaMa|On
  • [23:33:35] * JaMa|On is now known as JaMa|Zzz
  • [23:34:49] * chase (~chase@nat/ti/x-ffqjgosxzjyznhal) Quit ()
  • [23:35:29] <AlTheKiller> _av500_: Can I assume that the pinmux is right since I can read the pin just fine?
  • [23:40:54] * jrmuizel (~jrmuizel@66.207.206.180) Quit (Quit: jrmuizel)
  • [23:41:52] * mikey_w (~mike@pool-173-53-57-150.rcmdva.fios.verizon.net) Quit (Ping timeout: 265 seconds)
  • [23:44:15] * CMoH (~cipi@95.76.74.1) has joined #beagle
  • [23:44:20] * CMoH (~cipi@95.76.74.1) Quit (Changing host)
  • [23:44:20] * CMoH (~cipi@unaffiliated/c-moh) has joined #beagle
  • [23:45:51] <Dan__> rcn-ee: OK I followed the directions all right
  • [23:51:35] <Dan__> I don't get the "proc_load" message, but I do get "failed to get dsp mailbox handle"
  • [23:53:49] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Ping timeout: 260 seconds)
  • [23:59:16] * katie (~katierh@nat/ti/x-hdoyfvbgxhtvwapo) Quit ()