• [00:00:13] <djlewis> sakoman_: hi
  • [00:00:24] <sakoman_> hey djlewis!
  • [00:04:10] * chrisw957_home (~chris@mail.tacticalelectronics.com) Quit (Quit: Ex-Chat)
  • [00:05:02] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [00:05:32] * _roger_ (~a0740758@nat/ti/x-jkbnmymcmprjrukc) has joined #beagle
  • [00:19:16] * kanru (~kanru@118-160-164-12.dynamic.hinet.net) has joined #beagle
  • [00:19:29] * _roger_ (~a0740758@nat/ti/x-jkbnmymcmprjrukc) Quit (Ping timeout: 265 seconds)
  • [00:20:33] <Jefro> jkridner - not able to git clone or edit w/o git. brain function decreasing fast.
  • [00:20:55] <Jefro> did grab a snapshot using gitweb
  • [00:23:39] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) has joined #beagle
  • [00:30:11] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Ping timeout: 250 seconds)
  • [00:32:34] * andoma (~andoma@trac.lonelycoder.com) Quit (Ping timeout: 240 seconds)
  • [00:32:39] * andoma (~andoma@trac.lonelycoder.com) has joined #beagle
  • [00:36:43] * davidc__ (~davidc__@S01060018f8e3555b.vc.shawcable.net) has joined #beagle
  • [00:39:36] * ozk (~Oz@nat/ti/x-phlmdhfsfamfadwn) Quit (Ping timeout: 240 seconds)
  • [00:47:50] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [00:50:28] * Guest92350 (~noel@82-70-144-198.dsl.in-addr.zen.co.uk) Quit (Quit: Ex-Chat)
  • [00:52:46] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) has joined #beagle
  • [00:52:50] * mrj101 (~mrj10@mjlap.crhc.uiuc.edu) Quit (Quit: Leaving.)
  • [00:56:47] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) Quit (Ping timeout: 276 seconds)
  • [00:56:50] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Quit: Verlassend)
  • [00:57:13] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) has joined #beagle
  • [00:57:57] * emeb (~ericb@ip72-223-86-148.ph.ph.cox.net) Quit (Quit: Leaving.)
  • [00:59:28] * tdh2002_ (7141cd34@gateway/web/freenode/ip.113.65.205.52) has joined #beagle
  • [01:01:58] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) Quit (Ping timeout: 252 seconds)
  • [01:08:38] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) Quit (Ping timeout: 255 seconds)
  • [01:09:08] * L30_ (~leo@n116486222.netvigator.com) Quit (Quit: Ex-Chat)
  • [01:10:05] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) has joined #beagle
  • [01:13:28] * Zenton (~user@246.Red-88-29-1.staticIP.rima-tde.net) Quit (Ping timeout: 245 seconds)
  • [01:15:58] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera)
  • [01:17:52] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) Quit (Ping timeout: 240 seconds)
  • [01:18:11] * jconnolly|away is now known as jconnolly
  • [01:31:36] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) has joined #beagle
  • [01:34:35] * kanru (~kanru@118-160-164-12.dynamic.hinet.net) Quit (Ping timeout: 255 seconds)
  • [01:49:46] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [01:52:59] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [01:57:49] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera)
  • [01:58:51] * Max_Galemin (cbc09295@gateway/web/freenode/ip.203.192.146.149) has joined #beagle
  • [01:59:32] * metaliving (~victorere@129.133.197.199) has joined #beagle
  • [02:00:27] <metaliving> okay, so i've formatted the ext3 partition of my sd card and installed angstrom
  • [02:00:49] <metaliving> but for some reason the beagle boots up a demo version of angstrom which is probably located in the fat32 partition
  • [02:01:42] * awozniak (~awozniak@adsl-76-205-222-173.dsl.snlo01.sbcglobal.net) Quit (Quit: Leaving)
  • [02:03:40] <Max_Galemin> metaliving: try to change u-boot "bootcmd"
  • [02:05:40] <metaliving> in the user.scr file?
  • [02:05:46] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [02:06:46] <Max_Galemin> first of all try to run mmcboot by hand in u-boot and see if it works
  • [02:07:07] * hgs (~hgs@82.202-63-132.static.qala.com.sg) Quit (Ping timeout: 240 seconds)
  • [02:07:50] * holmes123 (~holmes123@74.11.100.93) has left #beagle
  • [02:08:22] <metaliving> not sure i follow
  • [02:10:19] <metaliving> where do i run mmcboot?
  • [02:10:20] <Max_Galemin> in u-boot comman line type "printenv" adn you'll see boot command for booting from mmc, "mmcboot" or "mmc-boot"
  • [02:10:33] <Max_Galemin> then exec "run mmcboot"
  • [02:10:46] <metaliving> how do i enter u-boot?
  • [02:11:01] <tdh2002_> sigh...
  • [02:11:07] <Max_Galemin> sorry, "mmc init", "run loaduimage", "run mmcboot"
  • [02:11:32] <Max_Galemin> hmmm...
  • [02:12:17] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [02:12:20] <Max_Galemin> reset the BB and when you'll se "Hit any key to stop autoboot:" press enter
  • [02:12:43] <tdh2002_> any key is ok
  • [02:12:56] <metaliving> ooh that makes sense
  • [02:12:56] <metaliving> ok
  • [02:14:37] <Max_Galemin> yes, "enter" or "any key", it doesn't matter ;)
  • [02:15:24] <tdh2002_> I have a question
  • [02:15:54] <tdh2002_> beagleboard has no nandflash, where can i restore the uboot config?
  • [02:16:09] <tdh2002_> I said beagleboard xm
  • [02:16:39] <Max_Galemin> in boot.scr or in u-boot.bin :)
  • [02:17:15] <Max_Galemin> .
  • [02:17:45] <Max_Galemin> include/configs/omap3_beagle.h
  • [02:18:05] <tdh2002_> ok ,
  • [02:19:40] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [02:19:55] <tdh2002_> Max_Galemin: Do you know how to config kernel for xm? when I use the kernel config for beagleboard, it seems doen't work for xm
  • [02:20:42] * matthsu (~matt@61-30-10-70.static.tfn.net.tw) Quit (Quit: Lost terminal)
  • [02:21:13] <Max_Galemin> tdh2002_: yes, I know :) but it depends on kernel version
  • [02:21:41] <Max_Galemin> what version of kernel and from what repo you are talking about?
  • [02:22:23] <tdh2002_> wait a minitue..
  • [02:22:51] * tdh2002 (~tdh2002@59.42.95.21) has joined #beagle
  • [02:23:05] <tdh2002> my kernel form :git://gitorious.org/beagleboard-validation/linux.git
  • [02:23:55] * PBansal (~pbansal@nat/ti/x-tlxdnlsqazumpwir) Quit (Ping timeout: 252 seconds)
  • [02:25:49] <metaliving> is there any way to reach the u-boot command line through the dvi output? there monitor seems to wake up far late in the process
  • [02:26:01] <metaliving> and i'm way to lazy to go get the rs-232
  • [02:26:06] <metaliving> too*
  • [02:26:12] * raster (~raster@222.106.49.54) has joined #beagle
  • [02:26:12] * raster (~raster@222.106.49.54) Quit (Changing host)
  • [02:26:12] * raster (~raster@enlightenment/developer/raster) has joined #beagle
  • [02:26:20] <Max_Galemin> metaliving: no
  • [02:26:23] <metaliving> okay
  • [02:26:33] <metaliving> the*
  • [02:26:34] <tdh2002_> I think you can save uboot config.
  • [02:26:55] <Max_Galemin> yes
  • [02:27:14] <metaliving> can i download a u-boot.bin file that is set up to boot from the ext3 partition?
  • [02:27:17] <metaliving> somewhere
  • [02:27:54] <Max_Galemin> you can change your user.scr (or boot.scr)
  • [02:27:57] <thurbad> just make a boot.scr and set it there
  • [02:28:32] <tdh2002_> Max_Galemin: My kernel form git://gitorious.org/beagleboard-validation/linux.git , is 2.6.32
  • [02:28:33] * tconant (~tconant@68.111.35.226) Quit (Quit: tconant)
  • [02:28:58] <Max_Galemin> ok, it's a good and stable kernel
  • [02:29:11] <Max_Galemin> so what the problem?
  • [02:29:57] <Max_Galemin> metaliving: are you on linux now?
  • [02:30:16] <metaliving> yeah
  • [02:30:25] <tdh2002_> I get the config.gz file and extract to the kernel, the i compile the kernl . the uImage doest work..
  • [02:31:02] <tdh2002_> I am using XM board now to chat with you..
  • [02:31:19] <Max_Galemin> what kind of config are you talking about? there is a config already in the kernel from beagleboard validation
  • [02:32:01] <tdh2002> is this one arch/arm/configs/omap3_beagle_defconfig?
  • [02:32:45] <Max_Galemin> yes
  • [02:33:06] <tdh2002_> oh i get config.gz from /proc/config.gz .
  • [02:33:25] <tdh2002> ok I will try this config
  • [02:35:38] <Max_Galemin> metaliving: try this:
  • [02:36:05] <Max_Galemin> exec commands in linux cli:
  • [02:36:08] <Max_Galemin> cat << EOF > my_boot_cmd mmc init run loaduimage run mmcboot EOF
  • [02:36:31] <Max_Galemin> mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Beagleboard-xM boot script" -d my_boot_cmd boot.scr
  • [02:37:07] <Max_Galemin> or user.scr ...
  • [02:37:34] <Max_Galemin> and replace this file on your SD card (save the old one before)
  • [02:38:04] <tdh2002_> Max : Do you talk to me?
  • [02:38:08] <Max_Galemin> hmmm, where are the newlines in the first command...
  • [02:38:39] <Max_Galemin> tdh2002_: ah, sorry, I'm talking to metaliving :)
  • [02:39:13] <tdh2002_> i mistake hmm
  • [02:41:54] <metaliving> hm... mkimage: Can't open user.scr: Read-only file system
  • [02:42:18] <metaliving> oh maybe i locked the reader
  • [02:42:30] <metaliving> k nevermind
  • [02:43:06] <Max_Galemin> don't forget to save the old version...
  • [02:43:42] <tdh2002_> It doent matter , when you lose the old version , I will send to you .
  • [02:44:19] * raster (~raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [02:45:43] <tdh2002_> new kernel is ready I try it now
  • [02:45:48] * tdh2002_ (7141cd34@gateway/web/freenode/ip.113.65.205.52) Quit (Quit: Page closed)
  • [02:48:11] <tdh2002> i get this message every time " *** Warning - bad CRC or NAND, using default environment"
  • [02:49:22] <tdh2002> Max_Galemin: ok it does work, thank you
  • [02:49:22] <metaliving> hm that doesn't seem to be working
  • [02:49:44] <metaliving> i get the beagleboard logo and nothing else
  • [02:50:49] <Max_Galemin> tdh2002: this is an U-Boot debug trace
  • [02:50:57] <Max_Galemin> not kernel one
  • [02:51:12] <tdh2002> another problem.
  • [02:51:41] * torez (~torez@cpe-70-123-140-186.austin.res.rr.com) Quit (Quit: Leaving)
  • [02:51:49] <tdh2002> when i cat /proc/cpuinfo, i got BogoMIPS: 994.64 it seems that the cpu is 500Mhz..
  • [02:51:58] <tdh2002> is this true?
  • [02:52:27] <Max_Galemin> DM3730 maximal freq is 1 GHz
  • [02:52:33] <tdh2002> Yes
  • [02:52:47] <Max_Galemin> so what the question? :)
  • [02:53:12] <tdh2002> i mean the xm board now run under 500Mhz.
  • [02:53:50] * mrj10 (~mrj10@63.252.64.254) has joined #beagle
  • [02:54:01] <Max_Galemin> why do you think so?
  • [02:55:38] <tdh2002> i cat /proc/cpuinfo, i got BogoMIPS: 994.6,
  • [02:55:40] <tdh2002> when i do this on PC, it shows bogomips : 4987.45, my cpu is 2493.557Mhz
  • [02:56:01] * hookem (43099bef@gateway/web/freenode/ip.67.9.155.239) has joined #beagle
  • [02:57:13] <mrj10> tdh2002: what was the question? i joined late.
  • [02:57:16] <Max_Galemin> and? :) if you have these values on your PC it doesn't mean that bogomips = 2xfreq :)
  • [02:57:32] <mrj10> http://en.wikipedia.org/wiki/BogoMips
  • [02:58:06] <mrj10> bogomips is measured by the kernel at boot time, and the ratio of bogomips to clock frequency depends on pipeline microarchitetcure
  • [02:58:10] <mrj10> *microarchitecture
  • [02:58:44] <tdh2002> How can i know the cpu frequence?
  • [02:59:02] <mrj10> modern x86 machines have much higher IPC than ARM; the mechanisms used to get that extra IPC are much of the reason ARM comes out as more power-efficient for many applications
  • [02:59:23] <Max_Galemin> hmmm... probably using oscilloscope :)
  • [02:59:27] <mrj10> cat /proc/cpuinfo might work, or cat/sys/devices/system/cpu/cpu0/cpufreq/<something>
  • [03:00:38] <Max_Galemin> actually all these values are not very accurate, but believe me, it runs at freq close to 1 GHz :)
  • [03:00:45] <tdh2002> cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
  • [03:00:47] <tdh2002> 1000000
  • [03:01:00] <tdh2002> Ok i trust you
  • [03:02:44] <tdh2002> when i used beagleboard B6, cat /proc/cpuinfo it shows bootmips 499.99..
  • [03:02:46] <tdh2002> so I dont why
  • [03:03:07] <Max_Galemin> by the way, it's strange taht you have a problem with kernel from validation repo
  • [03:03:47] <tdh2002> my XM version is A3.
  • [03:04:25] <Max_Galemin> my too
  • [03:05:09] <tdh2002> it takes me 3000RMB to buy it. sign......
  • [03:08:51] * espindola (~espindola@CPE001a704e2b6d-CM001225dd5348.cpe.net.cable.rogers.com) Quit (Quit: Ex-Chat)
  • [03:09:14] * Max_Galemin_ (cbc09295@gateway/web/freenode/ip.203.192.146.149) has joined #beagle
  • [03:09:27] <cwillu_at_work> tdh2002, use angrom's kernel if you want the xm to run at the right frequency
  • [03:09:45] <cwillu_at_work> at least until the patches land in mainline
  • [03:10:16] * hgs (~hgs@82.202-63-132.static.qala.com.sg) has joined #beagle
  • [03:11:16] * Max_Galemin__ (cbc09295@gateway/web/freenode/ip.203.192.146.149) has joined #beagle
  • [03:11:17] <tdh2002> cwillu_at_work:i mistake, the cpu run about 1Ghz.
  • [03:11:19] <tdh2002> i just dont know how to confirm it.
  • [03:11:31] * Max_Galemin (cbc09295@gateway/web/freenode/ip.203.192.146.149) Quit (Ping timeout: 265 seconds)
  • [03:11:54] <cwillu_at_work> plausible mistake; mainline kernel runs at 500mhz or 600mhz (can't remember)
  • [03:12:17] <Max_Galemin__> cwillu_at_work: validation kernel runs at the right freq :)
  • [03:12:17] <cwillu_at_work> or did at some point, or something
  • [03:12:30] <cwillu_at_work> Max_Galemin__, <cwillu_at_work> tdh2002, use angrom's kernel if you want the xm to run at the right frequency
  • [03:12:44] <cwillu_at_work> i.e., I just said that :p[
  • [03:13:11] <Max_Galemin__> what do you mean "angrom's kernel"?
  • [03:13:21] <tdh2002> angstrom..
  • [03:13:47] * tdh2002_ (7141cd34@gateway/web/freenode/ip.113.65.205.52) has joined #beagle
  • [03:13:56] * Max_Galemin_ (cbc09295@gateway/web/freenode/ip.203.192.146.149) Quit (Ping timeout: 265 seconds)
  • [03:15:44] <Max_Galemin__> validation != angstrom
  • [03:15:51] <Max_Galemin__> validation == arago
  • [03:16:49] <tdh2002> C guy
  • [03:19:26] <tdh2002> Max_Galemin__: what is your time now?
  • [03:23:42] <Max_Galemin__> tdh2002: 14:23
  • [03:24:15] <Max_Galemin__> why are you asking? :)
  • [03:24:34] <tdh2002> my time is 11:23,
  • [03:24:50] <tdh2002> I want to know where are you
  • [03:25:01] <Max_Galemin__> sydney, au
  • [03:25:16] <tdh2002> ???????????? ??????
  • [03:25:24] <Max_Galemin__> and what about you? where are you from?
  • [03:25:38] <tdh2002> Guangzhou , China
  • [03:25:43] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera)
  • [03:26:44] <tdh2002> Australia is not very far.
  • [03:26:44] <Max_Galemin__> ok, it's interesting :)
  • [03:26:55] <Max_Galemin__> yep
  • [03:28:38] <Max_Galemin__> but originally I'm from Ukraine :)
  • [03:29:03] <tdh2002> ?????????, why do you go to AU
  • [03:30:09] <Max_Galemin__> ukraine is not a very good place to live
  • [03:30:24] <tdh2002> Max_Galemin__: have you ever come to China for travelling?
  • [03:32:37] <Max_Galemin__> no, not yet
  • [03:33:55] <Max_Galemin__> is China a good country for travelling?
  • [03:34:57] <tdh2002> of course
  • [03:40:56] <tdh2002> there are Well-known tourist attractions in China
  • [03:43:02] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [03:44:18] * gdm (~gdm@186.18.69.144) Quit (Ping timeout: 245 seconds)
  • [04:00:50] * cody__ (~cody@dslb-084-056-091-125.pools.arcor-ip.net) has joined #beagle
  • [04:03:37] <metaliving> should i normally be able to input things on the terminal in a serial connection to the beagle?
  • [04:03:49] * cody_ (~cody@dslb-084-056-064-169.pools.arcor-ip.net) Quit (Ping timeout: 250 seconds)
  • [04:04:12] * tdh2002_ (7141cd34@gateway/web/freenode/ip.113.65.205.52) Quit (Ping timeout: 265 seconds)
  • [04:04:54] * Max_Galemin (~Max@203.192.146.149) has joined #beagle
  • [04:06:17] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera)
  • [04:08:26] <cwillu_at_work> metaliving, if you have a tty running on it (which you may or may not, depending on your distro)
  • [04:08:40] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [04:09:36] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) has joined #beagle
  • [04:10:00] * Max_Galemin__ (cbc09295@gateway/web/freenode/ip.203.192.146.149) Quit (Ping timeout: 265 seconds)
  • [04:13:32] * mrc3 (~ddiaz@189.157.119.212) Quit (Remote host closed the connection)
  • [04:14:41] <metaliving> thanks
  • [04:15:10] <metaliving> Max_Galemin, your script from before worked perfectly! thanks a ton
  • [04:16:46] <Max_Galemin> metaliving: no worries :)
  • [04:17:34] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) Quit (Quit: slchen)
  • [04:19:31] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [04:22:34] <cwillu_at_work> who needs a pandaboard: http://imgur.com/xhiZG?full :p
  • [04:23:48] <djlewis> now thats some ugly soldering in the back
  • [04:23:51] * dancios (~EOF@host144-89-206-9.limes.com.pl) Quit (Remote host closed the connection)
  • [04:23:54] <cwillu_at_work> djlewis, shush you :p
  • [04:24:41] <djlewis> and its almost as dusty as my BB ;)
  • [04:24:55] <cwillu_at_work> the bottom ones are cleaner :p
  • [04:25:04] <djlewis> go figure
  • [04:25:55] <djlewis> so you figure you have at least 2GB processing power there ?
  • [04:26:05] <cwillu_at_work> well, 720mhz*4
  • [04:26:08] <djlewis> or 2GHz i mean
  • [04:26:45] * gadiyar (~chatzilla@192.163.20.231) has joined #beagle
  • [04:27:42] * aholler_ (~aholler@p57B204C4.dip0.t-ipconnect.de) has joined #beagle
  • [04:28:10] <cwillu_at_work> hmm
  • [04:28:14] <Max_Galemin> wow, it's a mainframe!!!
  • [04:28:16] <cwillu_at_work> top one is a c3 actually
  • [04:28:23] <cwillu_at_work> the rest are c4's
  • [04:29:24] <djlewis> yeah, that c3 has seen some use
  • [04:30:56] * aholler (~aholler@p57B20340.dip0.t-ipconnect.de) Quit (Ping timeout: 240 seconds)
  • [04:31:10] <Max_Galemin> it's a probably beginning of SkyNet... and it needs to be destroyed...
  • [04:31:44] <cwillu_at_work> Max_Galemin, I also have a good pile of overo earths, but the don't stack as nicely
  • [04:32:37] <Max_Galemin> hmmm, you are happy man! I want all these toys too :)
  • [04:32:38] <djlewis> yeah, you might sneeze on the Overo and then have to go hunting them
  • [04:33:05] * raster (~raster@enlightenment/developer/raster) has joined #beagle
  • [04:33:11] <cwillu_at_work> yeah; the form factor is nice, until you realize you either need to make your own daughter boards, or spend another 100 dollars on adapters for the insanely sized connectors
  • [04:34:06] <cwillu_at_work> the screw holes are all about the size as the test points on the beagle
  • [04:36:45] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) has joined #beagle
  • [04:37:04] * hookem (43099bef@gateway/web/freenode/ip.67.9.155.239) Quit (Ping timeout: 265 seconds)
  • [04:40:23] <cwillu_at_work> ooo, I should daisy chain them via otg -> host usb :)
  • [04:41:02] * mazzanet (~mazzanet@hpavc/mazzanet) Quit (Ping timeout: 272 seconds)
  • [04:41:54] * raster (~raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [04:43:34] * GPSFan (~kenm@64.92.145.112) Quit (Quit: Leaving)
  • [04:46:28] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Quit: jrmuizel)
  • [04:47:19] * mrc3 (~ddiaz@189.157.121.134) has joined #beagle
  • [04:48:57] <djlewis> yep, the overo would be most difficult to use without an addon
  • [04:51:40] <cwillu_at_work> even with the addon's
  • [04:51:53] <cwillu_at_work> the gumstix one's all use tiny connectors
  • [04:52:19] <cwillu_at_work> like the otg port, but for the host as well
  • [04:52:23] <metaliving> Max_Galemin: ok, actually, it didn't work perfectly
  • [04:52:39] * NishanthMenon (~nmenon@nat/ti/x-crbilgypazuozqkh) Quit (Quit: Ex-Chat)
  • [04:53:10] <metaliving> even though i can see beagle booting up in the right place from the serial output
  • [04:53:32] <metaliving> the dvi output is constantly the beagleboard logo
  • [04:54:35] <metaliving> any ideas?
  • [04:56:23] <Max_Galemin> metaliving: I have a lot of ideas :))
  • [04:56:41] <metaliving> good to hear :)
  • [04:56:53] <Max_Galemin> in u-boot cli "printenv" and see "dvimode=" string
  • [04:56:53] <tdh2002> you may try dont choose bootup_logo in kernel, and choose frame console support
  • [04:57:21] <Max_Galemin> or something like that...
  • [04:57:55] <Max_Galemin> in any case merge your working config with the new one and find the main differences
  • [04:58:18] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) Quit (Read error: Connection reset by peer)
  • [04:58:40] * djanatan (~jonathan@benson-hall-cag-208-50.gallaudet.edu) has joined #beagle
  • [05:01:14] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) Quit (Quit: slchen)
  • [05:04:53] <metaliving> i'm still not sure how i'm supposed to access the u-boot cli, since i can't use the keyboard in a serial connection and i can't see the u-boot cli in the dvi
  • [05:07:36] <Max_Galemin> metaliving: ahh... it's much more interesting :)
  • [05:08:50] <metaliving> hm?
  • [05:09:09] <tdh2002> metaliving: Do you see anything in the tty of serical connection?
  • [05:09:38] <tdh2002> and what tty do you use?
  • [05:11:34] <metaliving> i see angstrom booting up
  • [05:11:35] <Max_Galemin> I'm always working with serial connection and with naked linux without video output so I can't help you
  • [05:11:53] <metaliving> gnome daemons etc.
  • [05:12:09] <metaliving> so it seems to be working fine
  • [05:12:47] * jkridner|work1 (~a0321898@nat/ti/x-edtefcjshonrsneb) has joined #beagle
  • [05:13:06] <tdh2002> I am using kermit , It seems very good .
  • [05:13:20] * espindola (~espindola@CPE001a704e2b6d-CM001225dd5348.cpe.net.cable.rogers.com) has joined #beagle
  • [05:13:45] * jkridner|work (~a0321898@nat/ti/x-aqtolfnnakpyrqod) Quit (Remote host closed the connection)
  • [05:14:21] <tdh2002> metaliving: you want uboot info print on the LCD ?
  • [05:14:27] <Max_Galemin> i like conman
  • [05:14:55] <metaliving> no, i want the gui
  • [05:15:02] <tdh2002> aptitude search conman nothing found.
  • [05:15:20] <tdh2002> metaliving: i dont what you want ...
  • [05:15:29] <tdh2002> i dont know what you want ...
  • [05:15:46] <metaliving> the x output
  • [05:16:52] <tdh2002> you can run angstrom dist.. It works well
  • [05:17:26] <Max_Galemin> http://code.google.com/p/conman/
  • [05:18:07] <metaliving> i am running angstrom
  • [05:19:03] <tdh2002> no x output??
  • [05:19:44] <metaliving> on the dvi
  • [05:20:21] <tdh2002> i use open embedded bitbake x11-gpe-image. it can work
  • [05:20:47] <tdh2002> omapfb.mode=dvi:800x600MR-16@60 omapdss.def_disp=dvi
  • [05:24:33] <tdh2002> Max: How can use conman connect to /dev/ttyS0 ?
  • [05:25:32] <Max_Galemin> just run daemon (conmand) and then "conman /dev/ttyS0"
  • [05:26:27] <tdh2002> ./conman /dev/ttyS0
  • [05:26:29] <tdh2002> ERROR: Unable to connect to <localhost.localdomain:7890>: Connection refused.
  • [05:26:52] <Max_Galemin> did you run conmand?
  • [05:27:07] <tdh2002> yes
  • [05:27:13] <tdh2002> conman /dev/ttyS0
  • [05:27:15] <tdh2002> ERROR: Unable to connect to <localhost.localdomain:7890>: Connection refused.
  • [05:27:39] <Max_Galemin> hmmm...
  • [05:27:58] <Max_Galemin> did you install conman?
  • [05:28:02] <Max_Galemin> make install
  • [05:28:04] <tdh2002> yes
  • [05:29:51] * metaliving (~victorere@129.133.197.199) Quit (Remote host closed the connection)
  • [05:31:16] <Max_Galemin> try to add alias for /dev/ttyS0 to the /usr/local/etc/conman.conf
  • [05:31:48] <Max_Galemin> add line:
  • [05:31:48] <Max_Galemin> console name="com0" dev="/dev/ttyS0"
  • [05:32:02] <tdh2002> no rate?
  • [05:32:15] <Max_Galemin> to the end of conman.conf and then run "conman com0"
  • [05:32:53] <tdh2002> The same error.
  • [05:33:01] <tdh2002> tt@tt-OptiPlex-330:/samba/tt/omap/linux$ conman com0
  • [05:33:03] <tdh2002> ERROR: Unable to connect to <localhost.localdomain:7890>: Connection refused.
  • [05:33:31] * jserv-- (~jserv@61-30-10-70.static.tfn.net.tw) Quit (Ping timeout: 240 seconds)
  • [05:33:51] <Max_Galemin> did you _really_ run conmand?
  • [05:33:55] * jserv-- (~jserv@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [05:34:01] <Max_Galemin> just "conmand"
  • [05:34:09] <Max_Galemin> with "d" at the end :)
  • [05:35:33] <Max_Galemin> could you please show me the output of "ps -e | grep conmand" command? :)
  • [05:35:54] <tdh2002> nothing
  • [05:36:20] <Max_Galemin> so you didn't run conmand :)
  • [05:36:36] <tdh2002> I use gnome terminal.
  • [05:36:48] <Max_Galemin> sudo conmand
  • [05:37:38] <Max_Galemin> it's a good program, you can work with the same com port from the different places but daemon needs to be run
  • [05:37:39] <tdh2002> OK
  • [05:38:15] <tdh2002> <ConMan> Connection to console [com0] opened.
  • [05:39:02] <tdh2002> I thought conmand to command..
  • [05:39:08] <tdh2002> sigh...
  • [05:40:34] * raster (~raster@222.106.49.62) has joined #beagle
  • [05:40:34] * raster (~raster@222.106.49.62) Quit (Changing host)
  • [05:40:34] * raster (~raster@enlightenment/developer/raster) has joined #beagle
  • [05:40:53] * gadiyar (~chatzilla@192.163.20.231) Quit (Ping timeout: 250 seconds)
  • [05:40:55] <Max_Galemin> now you can connect to the same port from other place "conman -j com0"
  • [05:40:56] * gadiyar_ (~chatzilla@192.163.20.231) has joined #beagle
  • [05:41:04] * gadiyar_ is now known as gadiyar
  • [05:41:33] <tdh2002> great
  • [05:41:53] <tdh2002> i have 2 terminal connect to com0
  • [05:42:05] <tdh2002> but even the same
  • [05:42:21] <Max_Galemin> in order to exit conman use '&' and then '.'
  • [05:42:57] <tdh2002> I see it.
  • [05:45:04] <tdh2002> Max: it seems very good! :)
  • [05:45:58] <Max_Galemin> tdh2002: yeah, I like it :)
  • [05:49:31] <tdh2002> I test the speed of eth on Xm, it is almost 95M..
  • [05:50:01] <Max_Galemin> hmmm... I got 69M
  • [05:50:09] <Max_Galemin> what did you use?
  • [05:50:59] <tdh2002> i use iperf
  • [05:51:14] <Max_Galemin> me too, it's strange
  • [05:52:29] <tdh2002> [ 3] local 192.168.1.95 port 37634 connected with 192.168.1.122 port 5001
  • [05:52:31] <tdh2002> [ ID] Interval Transfer Bandwidth
  • [05:52:33] <tdh2002> [ 3] 0.0-10.0 sec 113 MBytes 94.9 Mbits/sec
  • [05:53:09] <tdh2002> Client connecting to 192.168.1.122, TCP port 5001
  • [05:53:11] <tdh2002> TCP window size: 16.0 KByte (default)
  • [05:53:13] <tdh2002> ------------------------------------------------------------
  • [05:53:15] <tdh2002> [ 3] local 192.168.1.95 port 37637 connected with 192.168.1.122 port 5001
  • [05:53:17] <tdh2002> [ ID] Interval Transfer Bandwidth
  • [05:53:19] <tdh2002> [ 3] 0.0- 1.0 sec 11.4 MBytes 95.6 Mbits/sec
  • [05:53:21] <tdh2002> [ 3] 1.0- 2.0 sec 11.3 MBytes 94.8 Mbits/sec
  • [05:53:23] <tdh2002> [ 3] 2.0- 3.0 sec 11.2 MBytes 94.4 Mbits/sec
  • [05:53:25] <tdh2002> [ 3] 3.0- 4.0 sec 11.3 MBytes 94.8 Mbits/sec
  • [05:53:27] <tdh2002> [ 3] 4.0- 5.0 sec 11.3 MBytes 94.9 Mbits/sec
  • [05:53:29] <tdh2002> [ 3] 5.0- 6.0 sec 11.3 MBytes 94.9 Mbits/sec
  • [05:53:31] <tdh2002> [ 3] 6.0- 7.0 sec 11.1 MBytes 93.3 Mbits/sec
  • [05:53:33] <tdh2002> [ 3] 7.0- 8.0 sec 11.3 MBytes 94.9 Mbits/sec
  • [05:53:35] <tdh2002> [ 3] 8.0- 9.0 sec 11.4 MBytes 95.9 Mbits/sec
  • [05:53:37] <tdh2002> [ 3] 9.0-10.0 sec 11.7 MBytes 98.5 Mbits/sec
  • [05:53:39] <tdh2002> [ 3] 0.0-10.0 sec 113 MBytes 94.9 Mbits/sec
  • [05:53:41] <tdh2002> you can see it.
  • [05:55:25] <Max_Galemin> yeah, not bad
  • [05:58:30] * espindola (~espindola@CPE001a704e2b6d-CM001225dd5348.cpe.net.cable.rogers.com) Quit (Quit: Ex-Chat)
  • [06:03:12] <_av500_> tdh2002: pastebin.com
  • [06:08:16] <ds2> PASTEBIN!!!!!!!!
  • [06:08:56] <tdh2002> _av500_: what is it ?
  • [06:09:36] <_av500_> tdh2002: do you see the .com at the end?
  • [06:09:42] <_av500_> so it might be a url
  • [06:09:49] <tdh2002> I know .
  • [06:09:50] <_av500_> put it into your browser and try
  • [06:09:55] <tdh2002> ok
  • [06:10:13] <_av500_> also you are long enough in this channel to have seen it before
  • [06:10:34] <tdh2002> no
  • [06:12:12] <tdh2002> but i have no codes. i just use iperf to test the netcard speed.
  • [06:12:16] * metaliving (~victorere@129.133.197.199) has joined #beagle
  • [06:12:24] <_av500_> so?
  • [06:12:49] <tdh2002> pastebin needs codes to paste on it?
  • [06:12:59] <_av500_> it takes anything
  • [06:13:32] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera)
  • [06:13:33] <tdh2002> oh
  • [06:13:41] <_av500_> tdh2002: http://pastebin.com/eA18w8Fn
  • [06:14:00] <tdh2002> fanit :)
  • [06:16:04] <tdh2002> i am trying
  • [06:16:06] * robtmr (~robtmr@S01060026bb736c67.vc.shawcable.net) has joined #beagle
  • [06:24:47] <tdh2002> Max: i thought i know why speed is different between us
  • [06:26:12] <tdh2002> _av500_ : http://pastebin.com/UKEdSPRW
  • [06:26:15] <tdh2002> like this?
  • [06:26:50] * raster (~raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [06:31:20] <Max_Galemin> but what if you use iperf with default params? for example "iperf -s" on pc and "iperf -c 192.168.1.122" on BB?
  • [06:33:17] <tdh2002> 94.7 Mbits/sec
  • [06:33:24] <_av500_> tdh2002: yes, well done
  • [06:33:45] <Max_Galemin> hm...
  • [06:34:41] <Max_Galemin> ok, in any case it doesn't matter for my applications :)
  • [06:36:27] <tdh2002> even i use usb net card like AX88172B the speed almost 95M.
  • [06:37:00] <tdh2002> when using beagleboard B6, the speed is only 54M.
  • [06:38:11] <Max_Galemin> 54M it's a very good speed
  • [06:39:08] <tdh2002> and 95M is Amazing .....:)
  • [06:40:06] <Max_Galemin> definitely! :)
  • [06:40:23] <tdh2002> i used a Gigabit netcard the speed is 200M .. Not very good
  • [06:49:23] * amitk is now known as amitk-afk
  • [06:58:17] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Quit: Leaving)
  • [06:59:18] * siji (~siji@122.169.6.87) has joined #beagle
  • [07:04:57] * mazzanet (~mazzanet@hpavc/mazzanet) has joined #beagle
  • [07:07:31] * amitk-afk is now known as amitk
  • [07:13:23] * Max_Galemin (~Max@203.192.146.149) has left #beagle
  • [07:22:03] * ssvb (~ssvb@a88-114-220-213.elisa-laajakaista.fi) Quit (Quit: Leaving)
  • [07:26:41] * CMoH-notebook (~cipi@unaffiliated/c-moh) has joined #beagle
  • [07:37:40] * naeg (~naeg@111-166-19-84.nbiserv.com) has joined #beagle
  • [07:38:54] * mza (~mza@2001:470:dc88:2:21f:e2ff:fe10:3fa) has joined #beagle
  • [07:41:27] * robtmr (~robtmr@S01060026bb736c67.vc.shawcable.net) Quit (Quit: robtmr)
  • [07:54:35] * Guest61531 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Quit: Leaving)
  • [08:03:21] * djanatan (~jonathan@benson-hall-cag-208-50.gallaudet.edu) Quit (Quit: Leaving)
  • [08:03:45] * drakkan1000 (~drakkan@62.123.237.207) has joined #beagle
  • [08:04:00] * courville (~courville@archos.rain.fr) has joined #beagle
  • [08:05:54] * Proxyles (~henrik@c-0890e255.56-4-64736c14.cust.bredbandsbolaget.se) has joined #beagle
  • [08:18:16] * duffolonious (~bryan@75-168-72-213.mpls.qwest.net) Quit (Ping timeout: 265 seconds)
  • [08:20:35] * duffolonious (~bryan@75-168-95-205.mpls.qwest.net) has joined #beagle
  • [08:21:31] * mrc3 (~ddiaz@189.157.121.134) Quit (Ping timeout: 240 seconds)
  • [08:21:42] * CMoH-notebook (~cipi@unaffiliated/c-moh) Quit (Remote host closed the connection)
  • [08:24:00] * ucasano (~ucasano@host153-182-static.227-95-b.business.telecomitalia.it) has joined #beagle
  • [08:30:00] * ant_work (~andrea@host6-80-static.42-85-b.business.telecomitalia.it) has joined #beagle
  • [08:31:04] * jpirko (~jirka@sun-0.pirko.cz) has joined #beagle
  • [08:35:05] * naeg (~naeg@111-166-19-84.nbiserv.com) Quit (Ping timeout: 245 seconds)
  • [08:35:11] * mrc3 (~ddiaz@189.157.114.239) has joined #beagle
  • [08:35:52] * naeg (~naeg@111-166-19-84.nbiserv.com) has joined #beagle
  • [08:37:08] * amitk (~amit@122.169.26.77) Quit (Ping timeout: 276 seconds)
  • [08:38:27] * amitk (~amit@122.169.31.246) has joined #beagle
  • [08:44:23] <koen> sakoman_: it looks like I'll be in SFO at 12/1 and 2 as well :)
  • [08:50:49] <ds2> koen: where are you visiting?
  • [08:51:20] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) has joined #beagle
  • [08:51:56] <hgs> hi all, having frequent network unavailable to the omap board. what could be the probable reason?? is there any relation with the serial port and network? i see no network issue when i connect to the serial port to the terminal
  • [08:51:56] <ksinkar> hi guys
  • [08:52:57] <tdh2002> hgs: until now i have no issus
  • [08:53:10] <koen> ds2: http://events.linuxfoundation.org/component/registrationpro/?func=details&did=45
  • [08:55:43] <tdh2002> It is too far ,
  • [08:56:10] <ksinkar> has anyone over here used the c6runapp tool successfully?
  • [08:56:44] <mru> define success
  • [08:57:06] * CMoH-office (~cipi@unaffiliated/c-moh) has joined #beagle
  • [09:12:11] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) has joined #beagle
  • [09:24:02] * Openfree` (~Openfreer@116.228.88.131) Quit (Quit: Leaving)
  • [09:29:54] <ksinkar> mru: got their graphics code running faster after using c6runapp tool?
  • [09:30:42] <mru> that I doubt
  • [09:30:56] <mru> there are no magical go-faster tools
  • [09:31:12] <av500> you can always run it downhill
  • [09:33:26] <ksinkar> mru: i want my image processing code to run on that dsp core instead of arm core
  • [09:33:39] <ksinkar> khasim told me to use the c6runapp tool
  • [09:33:53] <ksinkar> i have never used it and no one around me either
  • [09:34:42] <ksinkar> btw on the bb site it is mentioned the opencv has been ported to bb
  • [09:35:04] <ksinkar> has it been optimized for running on the dsp or does it run on the ARM core only?
  • [09:35:27] <av500> arm
  • [09:35:52] <ksinkar> i wanna do it on dsp
  • [09:36:03] <av500> good luck
  • [09:36:05] <ksinkar> can u guide me?
  • [09:36:18] <av500> there was a BB gsoc about opencv on the dsp
  • [09:36:21] <av500> go have a look
  • [09:39:15] <tdh2002> go off work bye bye
  • [09:39:39] <hgs> hmmm... when i have the root fs mounted on nfs, i always able to ping the omap, but when i move everthing to flash i see omap ethernet connection goin on/off
  • [09:40:16] * tdh2002 (~tdh2002@59.42.95.21) has left #beagle
  • [09:40:45] <ynezz> maybe it's morse code? :p
  • [09:40:53] <ynezz> h-e-l-p-m-e
  • [09:42:55] <hgs> my board is alive..its talking
  • [09:43:49] <hgs> =-O
  • [09:44:51] * florian_kc (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [09:45:08] * florian_kc is now known as florian
  • [09:49:22] <av500> koen: rowboat has sgx sdk in a git, no eula, no clickthru?
  • [09:49:39] * Openfree` (~Openfreer@116.228.88.131) has joined #beagle
  • [09:50:35] * Crofton (~balister@adsl-75-37-22-143.dsl.pltn13.sbcglobal.net) Quit (Ping timeout: 276 seconds)
  • [09:50:49] <av500> koen: ignore, its just the .bin in the git
  • [09:52:59] * dscience (~chatzilla@202.155.233.94) has joined #beagle
  • [09:53:24] * naeg (~naeg@111-166-19-84.nbiserv.com) Quit (Quit: WeeChat 0.3.3)
  • [09:54:07] <dscience> Hi. I'd like to setup Java on my beagle board xm. Can someone point me to the right direction?
  • [09:54:31] <mru> -> hell
  • [09:55:02] <av500> dscience: http://www.aonix.com/pr_09.29.09b.html
  • [09:57:36] <DesktopMa> hmm can you chroot to an android rootfs on x86? or is that architecture dependant
  • [09:58:29] <av500> qemu
  • [09:58:40] <av500> android sdk comes with an emulator
  • [09:58:58] <mru> running java in qemu sound somehow wrong...
  • [09:59:20] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Ping timeout: 240 seconds)
  • [10:00:55] * Crofton (~balister@adsl-75-37-22-143.dsl.pltn13.sbcglobal.net) has joined #beagle
  • [10:04:12] <adj> running java at all sounds wrong
  • [10:04:21] <mru> obviously
  • [10:04:40] <mru> but the fundamental notion of a virtual machine isn't entirely without merit
  • [10:04:51] <mru> but running a vm on an emulator...
  • [10:05:38] <adj> just a while ago i was running windows 2k3 in vmware esxi which was running in vmware player under windows 7
  • [10:05:43] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [10:05:45] <adj> how wrong is that?
  • [10:08:02] <mru> vmware in vmware?
  • [10:08:07] <mru> is that even possible?
  • [10:08:37] <dscience> sounds like Inception
  • [10:08:39] <av500> seems so
  • [10:09:15] <adj> yeah, it ran "smoothlty" without any other real problems than the obvious perfomance hit
  • [10:09:15] <mru> does hw support nested virtualisation?
  • [10:09:32] <mru> or does it fall back on sw emulation of certain bits
  • [10:10:35] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) Quit (Ping timeout: 276 seconds)
  • [10:10:55] * rodrigo_golive (c8116f03@gateway/web/freenode/ip.200.17.111.3) has joined #beagle
  • [10:10:59] <DesktopMa> hardware supported virtualization isn't really much faster anyway. it's not emulation even if the cpu doesn't have virtualization specific extensions
  • [10:12:08] <mru> it has to trap and emulate privileged instructions
  • [10:12:32] <mru> and somehow emulate a privileged mode for the guest kernel to run in
  • [10:12:55] <mru> userspace code runs at full speed of course
  • [10:25:01] * XorA|gone is now known as XorA
  • [10:30:50] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) has joined #beagle
  • [10:32:12] * Openfree` (~Openfreer@116.228.88.131) Quit (Quit: Leaving)
  • [10:32:53] * Openfree` (~Openfreer@116.228.88.131) has joined #beagle
  • [10:33:05] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) Quit (Client Quit)
  • [10:33:11] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) has joined #beagle
  • [10:37:30] * reddev (3eec8068@gateway/web/freenode/ip.62.236.128.104) has joined #beagle
  • [10:45:44] * ksinkar_ (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) has joined #beagle
  • [10:45:58] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) Quit (Ping timeout: 245 seconds)
  • [10:56:17] * plasmab (~stephen@client-86-29-39-142.glfd.adsl.virginmedia.com) has joined #beagle
  • [11:04:58] * niclas (~niclas@nat/ti/x-skreuyggcehnpuvv) has joined #beagle
  • [11:05:22] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [11:05:28] * Belna (~Thomas@DSL01.212.114.252.242.ip-pool.NEFkom.net) Quit (Remote host closed the connection)
  • [11:14:28] * plasmab (~stephen@client-86-29-39-142.glfd.adsl.virginmedia.com) Quit (Read error: Connection reset by peer)
  • [11:21:53] * ksinkar_ is now known as ksinkar
  • [11:26:17] * davidc__ (~davidc__@S01060018f8e3555b.vc.shawcable.net) Quit (Quit: davidc__)
  • [11:34:55] * ucasano (~ucasano@host153-182-static.227-95-b.business.telecomitalia.it) Quit (Quit: ucasano)
  • [12:07:02] * gadiyar (~chatzilla@192.163.20.231) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.12/20101026210630])
  • [12:09:19] * dscience (~chatzilla@202.155.233.94) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.12/20101026200743])
  • [12:09:57] * Sept (~bakljg@c-24-131-138-21.hsd1.mn.comcast.net) has joined #beagle
  • [12:13:23] * gustavoz (~gustavoz@host39.201-252-58.telecom.net.ar) has joined #beagle
  • [12:26:37] * gdm_ (~gdm@186.18.69.144) has joined #beagle
  • [12:31:49] * rodrigo_golive (c8116f03@gateway/web/freenode/ip.200.17.111.3) Quit (Quit: Page closed)
  • [12:32:50] * naeg (~naeg@111-166-19-84.nbiserv.com) has joined #beagle
  • [12:33:43] * pcacjr (~pcacjr@187.113.175.203) has joined #beagle
  • [12:33:43] * pcacjr (~pcacjr@187.113.175.203) Quit (Changing host)
  • [12:33:43] * pcacjr (~pcacjr@unaffiliated/pcacjr) has joined #beagle
  • [12:37:03] <reddev> does anyone use static MAC address in BB? can you set mac address in u-boot of when the OS loads? i have tried it in /etc/network/interfaces with hwaddress ether 01:02:03:04:05:06 for usb0 but it does not work.
  • [12:37:44] <reddev> spelling error in 'mac address in u-boot or when the OS loads'
  • [12:37:51] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) Quit (Remote host closed the connection)
  • [12:38:10] <cwillu_at_work> reddev, what's the exact line you're using?
  • [12:38:16] <cwillu_at_work> and the exact error message if possible
  • [12:38:26] <cwillu_at_work> (I'd expect it to show up in /var/log/kern.0.log)
  • [12:38:30] <cwillu_at_work> (or similar)
  • [12:38:46] * rodrigo_golive (c8116f03@gateway/web/freenode/ip.200.17.111.3) has joined #beagle
  • [12:39:04] <reddev> cwillu_at_work using BB xM A rev.
  • [12:41:00] <reddev> I'm using following lines in interfaces
  • [12:41:02] <reddev> iface usb0 inet dhcp hwaddress ether 3E:02:D0:71:92:80
  • [12:42:50] <reddev> and I have Angstrom image. Does anyone use static MAC?
  • [12:44:36] <cwillu_at_work> reddev, can you give the exact error message it gives you
  • [12:44:44] * rcranetx (~rcranetx@nat/ti/x-rileexnutktiwczf) has joined #beagle
  • [12:47:25] <ogra> reddev, https://bugs.launchpad.net/ubuntu/+source/linux/+bug/673509
  • [12:47:36] <ogra> fixed in 2.6.37-rc1
  • [12:47:49] <reddev> cwillu_at_work there is no special error, MAC address won't change. Or then I can't find the error log.
  • [12:48:24] <cwillu_at_work> \o/
  • [12:53:14] * naeg (~naeg@111-166-19-84.nbiserv.com) Quit (Quit: WeeChat 0.3.3)
  • [12:57:06] * MarcelC (3ef1787c@gateway/web/freenode/ip.62.241.120.124) has joined #beagle
  • [12:58:15] * rcranetx (~rcranetx@nat/ti/x-rileexnutktiwczf) Quit (Quit: Leaving.)
  • [13:00:09] <reddev> ogra hey! thank you for this info in launchpad. have to check out the patch
  • [13:00:22] <ogra> good luck :)
  • [13:02:09] * MarcelC (3ef1787c@gateway/web/freenode/ip.62.241.120.124) Quit (Ping timeout: 265 seconds)
  • [13:02:25] * torez (~torez@cpe-70-123-140-186.austin.res.rr.com) has joined #beagle
  • [13:03:15] * RobotGuy (~n7pkt@c-24-21-60-36.hsd1.or.comcast.net) has joined #beagle
  • [13:03:19] * mrc3 (~ddiaz@189.157.114.239) Quit (Read error: Operation timed out)
  • [13:08:23] * rcranetx (~rcranetx@nat/ti/x-wzdevundkortjrsr) has joined #beagle
  • [13:11:43] * rcranetx (~rcranetx@nat/ti/x-wzdevundkortjrsr) Quit (Client Quit)
  • [13:12:05] * rcranetx (~rcranetx@nat/ti/x-ftmbocnrtafdidfm) has joined #beagle
  • [13:14:08] * davidc__ (~davidc__@S01060018f8e3555b.vc.shawcable.net) has joined #beagle
  • [13:18:55] * mrc3 (~ddiaz@189.157.114.93) has joined #beagle
  • [13:23:13] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) has joined #beagle
  • [13:25:57] * BlInK311 (~ward@ool-44c42324.dyn.optonline.net) has joined #beagle
  • [13:37:14] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) Quit (Ping timeout: 264 seconds)
  • [13:37:16] * ssvb (~ssvb@213.28.38.100) has joined #beagle
  • [13:37:58] * RobotGuy (~n7pkt@c-24-21-60-36.hsd1.or.comcast.net) Quit (Remote host closed the connection)
  • [13:40:45] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) has joined #beagle
  • [13:42:51] * ben_kludged (~ben@c-68-59-45-216.hsd1.sc.comcast.net) has joined #beagle
  • [13:43:36] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) has joined #beagle
  • [13:44:59] * siji (~siji@122.169.6.87) Quit (Quit: Leaving)
  • [13:51:54] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [13:53:34] * Bert__ (984e4a40@gateway/web/freenode/ip.152.78.74.64) has joined #beagle
  • [13:54:00] * Bert__ is now known as Guest9154
  • [13:56:36] <Guest9154> Hi everyone, I downloaded Angstrom-Beagleboard-demo-image-glibc-ipk-2010.3-beagleboard.rootfs.tar.bz2 , configured my SD c ard, etc...now I have the console running but cannot get a GUI, as a Linux beginner, I could not find a way to achieve this, anyone some simple hints how to proceed? A pleasure...
  • [14:00:39] * BThompson (~a0193480@nat/ti/x-hijtsbtcyibrubid) has joined #beagle
  • [14:02:38] * ucasano (~ucasano@host153-182-static.227-95-b.business.telecomitalia.it) has joined #beagle
  • [14:06:31] <reddev> Guest9154 hey, have you connected BB with serial cable to PC and checked the output? what's the output
  • [14:11:22] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Remote host closed the connection)
  • [14:11:22] * b7500af1 (~vt@2001:468:c80:4240:21c:bfff:fe8b:9c32) has joined #beagle
  • [14:15:30] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera)
  • [14:18:49] <reddev> Guest9154 follow Section IV in here http://code.google.com/p/beagleboard/wiki/HowToGetAngstromRunning to setup u-boot arguments
  • [14:19:01] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Quit: Leaving)
  • [14:19:19] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [14:25:55] * Openfree (~df@61.170.206.160) has joined #beagle
  • [14:26:35] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera)
  • [14:31:09] * ogra (~ogra@ubuntu/member/ogra) Quit (Read error: Connection reset by peer)
  • [14:31:20] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) Quit (Quit: slchen)
  • [14:32:00] * ogra (~ogra@ubuntu/member/ogra) has joined #beagle
  • [14:32:01] * ozk (~Oz@nat/ti/x-nceotuumsnpsxrge) has joined #beagle
  • [14:35:26] * reddev (3eec8068@gateway/web/freenode/ip.62.236.128.104) Quit (Ping timeout: 265 seconds)
  • [14:39:10] * GPSFan (~kenm@64.92.145.112) has joined #beagle
  • [14:44:34] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
  • [14:46:54] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) has joined #beagle
  • [14:48:50] * pcacjr (~pcacjr@unaffiliated/pcacjr) Quit (Ping timeout: 245 seconds)
  • [14:50:09] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) has joined #beagle
  • [14:54:23] <Guest9154> @reddev: yes, I get a login an can enter as root
  • [15:03:02] * Entasis (~Jarred@ppp118-210-113-58.lns20.adl2.internode.on.net) has joined #beagle
  • [15:04:22] * DarrenE (~darreneth@nat/ti/x-orrbvbkhzuiortos) has joined #beagle
  • [15:04:52] * cwillu_at_work tries to work out why there's a whole din rail of parts in this box that isn't in the manifest, nor in the invoice we sent, nor in the invoice we received
  • [15:07:09] * _koen_ (~x0115699@nat/ti/x-qgeakciitbemsmcp) Quit (Ping timeout: 240 seconds)
  • [15:08:35] <djlewis> cwillu_at_work: gets his bonus :)
  • [15:09:44] * krtaylor (~krtaylor@72.183.125.181) has joined #beagle
  • [15:10:47] * n6pfk (~n6pfk__@pool-173-53-57-150.rcmdva.fios.verizon.net) has joined #beagle
  • [15:14:04] <cwillu_at_work> djlewis, the tricky thing is I want to buy the same din rail of gear, and I have no idea what's on it :p
  • [15:14:13] <cwillu_at_work> I'm gonna be resorting to site pics right away
  • [15:16:16] * Mike (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [15:16:28] * zoof (d0312c24@gateway/web/freenode/ip.208.49.44.36) has joined #beagle
  • [15:16:43] * Mike is now known as Guest45001
  • [15:16:44] <cwillu_at_work> at least, I would be if I could find them
  • [15:23:08] * CMoH-office (~cipi@unaffiliated/c-moh) Quit (Remote host closed the connection)
  • [15:26:24] * b7500af1 (~vt@2001:468:c80:4240:21c:bfff:fe8b:9c32) Quit (Quit: Leaving)
  • [15:30:11] <djlewis> cwillu_at_work: well, whoever sent you the demo should have a list?
  • [15:31:04] <cwillu_at_work> djlewis, I'm looking at said list
  • [15:32:54] <cwillu_at_work> I've got a blueprint with the relevant parts and rail, the pinouts thereon are all labelled, they just don't exist on any other paper
  • [15:33:20] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [15:33:29] * amitk (~amit@122.169.31.246) Quit (Ping timeout: 240 seconds)
  • [15:33:51] * emeb (~ericb@ip72-223-86-148.ph.ph.cox.net) has joined #beagle
  • [15:34:36] * NishanthMenon (~nmenon@nat/ti/x-vfbzyxjrphgtuelw) has joined #beagle
  • [15:34:43] * alancam (~a-campbel@nat/ti/x-zspdanijndwbmzsk) has joined #beagle
  • [15:48:34] * mrc3 (~ddiaz@189.157.114.93) Quit (Ping timeout: 272 seconds)
  • [15:53:37] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) has joined #beagle
  • [16:00:10] * mrc3 (~ddiaz@189.157.110.32) has joined #beagle
  • [16:00:30] * jpirko (~jirka@sun-0.pirko.cz) Quit (Quit: Leaving)
  • [16:10:46] * niclas (~niclas@nat/ti/x-skreuyggcehnpuvv) Quit ()
  • [16:13:38] * holmes123 (~holmes123@74.11.100.93) has joined #beagle
  • [16:17:44] * GatorBoz (0c08e006@gateway/web/freenode/ip.12.8.224.6) has joined #beagle
  • [16:17:50] <GatorBoz> has anyone used the DSTREAM from ARM before?
  • [16:19:30] * awozniak (~awozniak@76.205.222.173) has joined #beagle
  • [16:24:23] * GatorBoz (0c08e006@gateway/web/freenode/ip.12.8.224.6) Quit (Quit: Page closed)
  • [16:25:10] * b7500af1 (~vt@2001:468:c80:4240:21c:bfff:fe8b:9c32) has joined #beagle
  • [16:26:49] * DarrenE (~darreneth@nat/ti/x-orrbvbkhzuiortos) Quit (Ping timeout: 240 seconds)
  • [16:27:15] * metaliving (~victorere@129.133.197.199) Quit (Remote host closed the connection)
  • [16:29:04] <emeb> it's quiet... Too quiet...
  • [16:29:28] <mru> the calm before the storm
  • [16:29:43] <emeb> expecting a wild weekend?
  • [16:29:53] <mru> one can always hope
  • [16:30:00] <emeb> heh
  • [16:31:08] <djlewis> hi guys
  • [16:31:32] <djlewis> mru: need troll victims?
  • [16:31:43] <emeb> hi djlewis
  • [16:31:48] <mru> djlewis: got any good ones?
  • [16:32:34] <djlewis> perhaps the unsuspecting will drop by later
  • [16:33:11] * Proxyles (~henrik@c-0890e255.56-4-64736c14.cust.bredbandsbolaget.se) Quit (Remote host closed the connection)
  • [16:35:25] * prpplague (~danders@nat/ti/x-ssdbxheympqxtwmq) has joined #beagle
  • [16:36:21] <djlewis> hmmm, time to replace a hd, my hd smart tells me I now have 43 errors of a 98 threshold
  • [16:36:39] <djlewis> oops 0 threshold, 98 worst
  • [16:38:51] <sakoman_> koen: looks like we'll finally get to meet in person, I'll be at the same meeting
  • [16:41:45] <av500> sakoman_: so for koen you do come to sfo! :)
  • [16:42:20] <sakoman_> av500: I was going before I even knew he would be there
  • [16:42:31] * ssvb (~ssvb@213.28.38.100) Quit (Quit: Leaving)
  • [16:42:54] <sakoman_> now I must reconsider so as not to offend av500 :-)
  • [16:43:01] <av500> :9
  • [16:43:07] <av500> :) Don't
  • [16:46:32] * n6pfk (~n6pfk__@pool-173-53-57-150.rcmdva.fios.verizon.net) Quit (Remote host closed the connection)
  • [16:47:58] * mazzanet (~mazzanet@hpavc/mazzanet) Quit (Ping timeout: 252 seconds)
  • [16:48:44] * mazzanet (~mazzanet@fe1-1.mel-ii.bdr1.mazzanet.id.au) has joined #beagle
  • [16:48:44] * mazzanet (~mazzanet@fe1-1.mel-ii.bdr1.mazzanet.id.au) Quit (Changing host)
  • [16:48:44] * mazzanet (~mazzanet@hpavc/mazzanet) has joined #beagle
  • [16:50:15] <koen> sakoman_: you're required to think of at least 5 yocto puns
  • [16:50:49] <sakoman_> koen: should be 8 methinks
  • [16:51:44] <mru> does that count as one?
  • [16:52:13] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [16:54:08] <koen> I think it does
  • [16:54:37] * CMoH-notebook (~cipi@95.76.71.81) has joined #beagle
  • [16:54:37] * CMoH-notebook (~cipi@95.76.71.81) Quit (Changing host)
  • [16:54:37] * CMoH-notebook (~cipi@unaffiliated/c-moh) has joined #beagle
  • [16:54:37] <sakoman_> good 7 more to go :-)
  • [16:59:00] * DarrenE (~darreneth@nat/ti/x-gmwtkyxobwcwnzuc) has joined #beagle
  • [17:04:18] * jayabharath (~jayabhara@nat/ti/x-ukygvdhzdkfctida) has joined #beagle
  • [17:07:30] * Guest9154 (984e4a40@gateway/web/freenode/ip.152.78.74.64) Quit (Quit: Page closed)
  • [17:07:46] * brijesh (~Brijesh@nat/ti/x-fcajjjtjsamggrsl) has joined #beagle
  • [17:09:58] <GrueMaster> av500: Due to a miscommunication, the kernel testing I asked you to do earlier on BeagleXM vA3 needs to be redone. If you still have the image, there should be a new kernel in maverick-proposed ready to install. Can you install it and reboot?
  • [17:11:05] * cwillu_at_work giggles in GrueMaster's direction, having overheard the backstory :)
  • [17:11:27] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [17:11:46] <GrueMaster> For the record, I had nothing to do with that mess (and am rather displeased by it).
  • [17:12:53] * holmes123 (~holmes123@74.11.100.93) Quit (Read error: Connection reset by peer)
  • [17:14:20] * CMoH-notebook (~cipi@unaffiliated/c-moh) Quit (Remote host closed the connection)
  • [17:15:44] * djlewis (~djlewis@75.15.65.246) Quit (Quit: Leaving.)
  • [17:19:39] * kanru (~kanru@118-160-164-12.dynamic.hinet.net) has joined #beagle
  • [17:21:26] * Squintz (~davepow16@173-10-155-129-BusName-washingtonDC.hfc.comcastbusiness.net) has joined #beagle
  • [17:22:52] <zoof> has anyone here laid out their own pcb?
  • [17:23:51] * holmes123 (~holmes123@74.11.100.93) has joined #beagle
  • [17:23:58] <Squintz> I would like to learn how to tell which POP Memory chips are compatible with the OMAP3530-CBB. Is there anyone here that can assist me? I'm going to spin my own board and since the 2G used in the Beagle has an End of Life state I would like to use a different chip.
  • [17:26:42] <zoof> Look at this chart, omap compatible memory, http://www.micron.com/partscatalog.html?categoryPath=products/parametric/MCP/multichip_packages
  • [17:28:08] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) Quit (Quit: slchen)
  • [17:28:30] * noleguy (~tim@nat/ti/x-nmjwzsnzgpusqrtu) Quit (Quit: Leaving.)
  • [17:28:34] <Squintz> I saw that page and was looking at using this: MT29C4G96MAZAPCJG-5 IT
  • [17:29:05] <Squintz> I see it says OMAP but was not sure if that meant all omaps.
  • [17:31:07] <zoof> Same package I was looking, I have same concern for DM3730 CUS package, Beagle XM had the issue with nand i wouldn't want to repeat
  • [17:37:28] <Squintz> Is the 3530 capable of addressing 4Gb. Where can I look on TI to find the answer?
  • [17:37:49] <jacekowski> in trm
  • [17:37:55] <jacekowski> or datasheet
  • [17:38:58] * BThompson (~a0193480@nat/ti/x-hijtsbtcyibrubid) Quit (Remote host closed the connection)
  • [17:45:41] * ant_work (~andrea@host6-80-static.42-85-b.business.telecomitalia.it) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.12/20101026210630])
  • [17:47:24] * BThompson (~a0193480@nat/ti/x-jthjaueyddqirvrv) has joined #beagle
  • [17:48:56] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Read error: Connection reset by peer)
  • [17:49:01] * BThompson (~a0193480@nat/ti/x-jthjaueyddqirvrv) Quit (Client Quit)
  • [17:51:47] * Entasis (~Jarred@ppp118-210-113-58.lns20.adl2.internode.on.net) Quit (Quit: Leaving)
  • [17:57:30] <zoof> 3530 has two chip selects, 4Gbits max on each select, 8G total for lpddr sdram
  • [18:00:13] <ds2> p
  • [18:00:16] <Squintz> So these use the SDRC interface and not the GPMC interface?
  • [18:01:13] <jonpry> zoof, i've layed it out
  • [18:01:21] <jonpry> using CUS
  • [18:01:31] * silesh (~silesh@nat/ti/x-snclxzyouwkdmbik) has joined #beagle
  • [18:02:42] <jonpry> Squintz, ddr is on sdrc, and nand on gpmc. some pop's have both
  • [18:02:47] <Squintz> Which layout software did you use jonpry?
  • [18:02:54] <jonpry> allegro
  • [18:03:22] * silesh (~silesh@nat/ti/x-snclxzyouwkdmbik) Quit (Client Quit)
  • [18:04:22] <Squintz> Hmm... I'm slowly starting to understand.
  • [18:05:07] <zoof> jonpry, what package for memory on pcb did you use, was the track spacing via more affected by memory than CUS package in your case?
  • [18:05:55] <jonpry> i used bga90 memory. i don't understand your other question
  • [18:06:21] <jonpry> it is not possible without at least 5/5
  • [18:06:54] <jonpry> supposedly you can get away with 10/20 vias but i couldn't see how and used 8/18
  • [18:07:24] <GrueMaster> av500: Ping
  • [18:07:44] <zoof> cus package ball to ball meant to relax requirements somewhat relative to BB package and thought the memory package ball spacing would dominate the board rules
  • [18:07:59] <jonpry> not really
  • [18:08:19] <zoof> 8/18 via and 5/5 is good! that's where most of my other stuff has been recently
  • [18:08:30] <jonpry> cus requires 5/5. .8mm memory might be possible with 6/6. and if you use pop memory as a bga, definitely 6/6
  • [18:08:54] <jonpry> maybe even 8/8
  • [18:09:39] <zoof> how were your vias, through or blind/buried
  • [18:09:45] <jonpry> through
  • [18:10:33] <jonpry> but it is not for the faint of heart. i had to route the board to 90% completion by hand
  • [18:10:52] <zoof> nice, i'm a little less worried already, did you follow a particular schematic beagle xM, mistral etc?
  • [18:11:39] <jonpry> not really. i read all the schematics available but had to make my own.
  • [18:12:03] <jonpry> really watch out for the PMIC's, BB and such use .4mm 209 bga
  • [18:12:33] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [18:13:05] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [18:13:12] <jonpry> iirc, that signs you up for 3/3 microvia
  • [18:13:53] <zoof> ok..i was going to look into a ball spaced relaxed pmic, I hear there may be one....Wow, 3/3 microvia is exactly what I don't want!
  • [18:14:43] <jonpry> i designed using tps65910 in qfn, and a seperate ts controller/codec combo and battery charger
  • [18:15:11] <jonpry> however the RTP i was quoted for the chip appears to have been way off base and i can't get it
  • [18:17:45] <zoof> that's sound good, I thought I would have to upgrade the codec for higher sampling rate as well, battery charger circuit needs more juice for me too
  • [18:20:15] <zoof> how long a lead time for qfn tps65910?
  • [18:22:24] * drakkan1000 (~drakkan@62.123.237.207) Quit (Remote host closed the connection)
  • [18:24:00] <jonpry> 2 month ago i was told it would be available in 2-3 weeks
  • [18:24:39] * grund-away (~grund@firebug.buglabs.net) Quit (Remote host closed the connection)
  • [18:26:08] <zoof> that's crazy, no samples available for your boards?
  • [18:26:57] <jonpry> not yet. i'm going to have to power with external supplies
  • [18:30:40] <zoof> as long as the power sequence is mimicked it should be ok i'm sure, i'm probably 8 weeks from needing parts, hopefully it will all work out, what type of memory used the bga90?
  • [18:31:13] * XorA is now known as XorA|gone
  • [18:31:29] <jonpry> a micron lpddr 2gb. not sure of the exact number, but there is only one
  • [18:34:10] * Openfree (~df@61.170.206.160) Quit (Remote host closed the connection)
  • [18:35:01] <zoof> i keep wondering if a module is the better way to go on these for my application...the magik 3730 looks good, don't know the pricing
  • [18:35:19] * grund (~grund@firebug.buglabs.net) has joined #beagle
  • [18:36:45] * kanru (~kanru@118-160-164-12.dynamic.hinet.net) Quit (Ping timeout: 245 seconds)
  • [18:38:24] * gustavoz (~gustavoz@host39.201-252-58.telecom.net.ar) Quit (Quit: Leaving)
  • [18:40:23] <jonpry> or the BB
  • [18:42:11] * chrisw957_home (~chris@mail.tacticalelectronics.com) has joined #beagle
  • [18:43:55] <zoof> true, unfortunately i need something smaller
  • [18:44:05] * CMoH-notebook (~cipi@unaffiliated/c-moh) has joined #beagle
  • [18:47:03] * grund (~grund@firebug.buglabs.net) Quit (Read error: No route to host)
  • [18:47:40] * grund (~grund@firebug.buglabs.net) has joined #beagle
  • [18:59:26] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
  • [19:05:02] * mrj10 (~mrj10@63.252.64.254) Quit (Ping timeout: 255 seconds)
  • [19:06:50] * courville (~courville@archos.rain.fr) Quit (Ping timeout: 260 seconds)
  • [19:10:16] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) has joined #beagle
  • [19:12:38] * ssvb (~ssvb@a88-114-220-213.elisa-laajakaista.fi) has joined #beagle
  • [19:16:00] * CMoH-notebook (~cipi@unaffiliated/c-moh) Quit (Remote host closed the connection)
  • [19:16:20] * Guest45001 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Ping timeout: 245 seconds)
  • [19:20:05] * b7500af1 (~vt@2001:468:c80:4240:21c:bfff:fe8b:9c32) Quit (Quit: Leaving)
  • [19:21:32] * peabody124 (~peabody12@128.249.96.124) has joined #beagle
  • [19:23:47] * ucasano (~ucasano@host153-182-static.227-95-b.business.telecomitalia.it) Quit (Quit: ucasano)
  • [19:27:55] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) Quit (Ping timeout: 240 seconds)
  • [19:34:03] * Mike (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [19:34:23] * rodrigo_golive (c8116f03@gateway/web/freenode/ip.200.17.111.3) Quit (Quit: Page closed)
  • [19:34:29] * Mike is now known as Guest64359
  • [19:37:27] * tconant (~tconant@68.111.35.226) has joined #beagle
  • [19:39:28] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Remote host closed the connection)
  • [19:39:34] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [19:41:34] * peabody124 (~peabody12@128.249.96.124) Quit (Quit: peabody124)
  • [19:42:55] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [19:42:56] * peabody124 (~peabody12@128.249.96.21) has joined #beagle
  • [19:49:36] * zoof (d0312c24@gateway/web/freenode/ip.208.49.44.36) Quit (Quit: Page closed)
  • [19:57:40] * BThompson (~a0193480@nat/ti/x-mvvqjnbvyduxsikq) has joined #beagle
  • [19:58:00] * khem is now known as onoffon
  • [19:59:16] * heathkid (~heathkid2@108.98.50.63) has joined #beagle
  • [19:59:24] * heathkid (~heathkid2@108.98.50.63) has left #beagle
  • [19:59:49] * onoffon is now known as khem
  • [20:03:18] * eballetbo (~eballetbo@213.Red-88-24-112.staticIP.rima-tde.net) has joined #beagle
  • [20:05:49] * katie_ (~katierh@nat/ti/x-jsfrkjagrudbkahu) has joined #beagle
  • [20:07:31] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) Quit (Ping timeout: 265 seconds)
  • [20:09:31] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) has joined #beagle
  • [20:13:29] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) Quit (Read error: Connection reset by peer)
  • [20:13:33] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) has joined #beagle
  • [20:13:59] * hookem (43099bef@gateway/web/freenode/ip.67.9.155.239) has joined #beagle
  • [20:15:12] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) Quit (Quit: Lost terminal)
  • [20:16:27] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) Quit (Client Quit)
  • [20:18:03] * eballetbo (~eballetbo@213.Red-88-24-112.staticIP.rima-tde.net) Quit (Ping timeout: 245 seconds)
  • [20:18:10] * BThompson (~a0193480@nat/ti/x-mvvqjnbvyduxsikq) Quit (Remote host closed the connection)
  • [20:18:59] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) has joined #beagle
  • [20:20:21] * theholyduck (~holyduck@82.147.59.59) has joined #beagle
  • [20:21:25] <ds2> crhc?
  • [20:22:18] <emeb> can recently haz cheezburger?
  • [20:22:43] <ds2> I used to know what cso was.. just curious what dept is crhc
  • [20:23:28] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) Quit (Ping timeout: 245 seconds)
  • [20:24:13] * BThompson (~a0193480@nat/ti/x-doqkxrvldsnydyiy) has joined #beagle
  • [20:24:28] <emeb> ah - where mrj10 is from...
  • [20:31:03] * Guest64359 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Quit: Leaving)
  • [20:31:08] * eballetbo (~eballetbo@213.Red-88-24-112.staticIP.rima-tde.net) has joined #beagle
  • [20:31:39] * katie_ (~katierh@nat/ti/x-jsfrkjagrudbkahu) Quit ()
  • [20:34:56] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) has joined #beagle
  • [20:36:48] * alancam (~a-campbel@nat/ti/x-zspdanijndwbmzsk) Quit (Ping timeout: 265 seconds)
  • [20:37:13] * eballetbo (~eballetbo@213.Red-88-24-112.staticIP.rima-tde.net) Quit (Ping timeout: 245 seconds)
  • [20:43:20] * dl9pf (~quassel@opensuse/member/dl9pf) has joined #beagle
  • [20:43:53] * dl9pf_ (~quassel@p5B214F4A.dip.t-dialin.net) Quit (Ping timeout: 245 seconds)
  • [20:44:37] * GPSFan (~kenm@64.92.145.112) Quit (Remote host closed the connection)
  • [20:49:53] * eballetbo (~eballetbo@213.Red-88-24-112.staticIP.rima-tde.net) has joined #beagle
  • [20:52:41] * GPSFan (~kenm@64.92.145.112) has joined #beagle
  • [20:54:39] * ceyusa (~vjaquez@95.61.238.167) has joined #beagle
  • [20:58:01] * eballetbo (~eballetbo@213.Red-88-24-112.staticIP.rima-tde.net) Quit (Quit: Ex-Chat)
  • [21:04:15] <_av500_> GrueMaster: sorry, missed you
  • [21:04:22] <_av500_> so monday only
  • [21:05:02] * BlInK311 (~ward@ool-44c42324.dyn.optonline.net) Quit (Quit: Leaving)
  • [21:05:39] <GrueMaster> Monday only?
  • [21:05:41] <GrueMaster> Ok
  • [21:06:02] <_av500_> its at the office
  • [21:06:07] <GrueMaster> Ah.
  • [21:14:17] * gdm_ (~gdm@186.18.69.144) Quit (Ping timeout: 250 seconds)
  • [21:19:47] * gdm (~gdm@186.18.69.144) has joined #beagle
  • [21:24:11] * peabody124_ (~peabody12@128.249.96.21) has joined #beagle
  • [21:24:11] * peabody124 (~peabody12@128.249.96.21) Quit (Read error: Connection reset by peer)
  • [21:24:11] * peabody124_ is now known as peabody124
  • [21:24:32] * alancam (~a-campbel@nat/ti/x-ngsbigytkisahmgc) has joined #beagle
  • [21:26:14] * alancam (~a-campbel@nat/ti/x-ngsbigytkisahmgc) Quit (Client Quit)
  • [21:29:25] * Rhinebeck3 (~krishna@nat/ti/x-bnzbyeikncgnwdqg) has left #beagle
  • [21:33:21] * ceyusa (~vjaquez@95.61.238.167) Quit (Ping timeout: 265 seconds)
  • [21:40:05] * mza (~mza@2001:470:dc88:2:21f:e2ff:fe10:3fa) Quit (Read error: Operation timed out)
  • [21:50:39] * gdm (~gdm@186.18.69.144) Quit (Read error: Operation timed out)
  • [21:50:41] * alancam (~a-campbel@nat/ti/x-mvzpmdwwvseayjwt) has joined #beagle
  • [21:51:28] * gdm (~gdm@186.18.69.144) has joined #beagle
  • [21:51:59] * alancam_ (~a-campbel@nat/ti/x-zduogrmdlqdmcbhy) has joined #beagle
  • [21:52:58] * alancam_ (~a-campbel@nat/ti/x-zduogrmdlqdmcbhy) Quit (Client Quit)
  • [21:53:48] * rcranetx (~rcranetx@nat/ti/x-ftmbocnrtafdidfm) Quit (Quit: Leaving.)
  • [21:53:48] * NishanthMenon (~nmenon@nat/ti/x-vfbzyxjrphgtuelw) Quit (Quit: Ex-Chat)
  • [21:54:48] * theholyduck (~holyduck@82.147.59.59) Quit (Read error: Connection reset by peer)
  • [21:55:08] * alancam (~a-campbel@nat/ti/x-mvzpmdwwvseayjwt) Quit (Ping timeout: 245 seconds)
  • [22:00:26] * torez (~torez@cpe-70-123-140-186.austin.res.rr.com) Quit (Quit: Leaving)
  • [22:04:13] * alancam (~a-campbel@nat/ti/x-npbquelvdcubhwjr) has joined #beagle
  • [22:04:40] * alancam (~a-campbel@nat/ti/x-npbquelvdcubhwjr) Quit (Client Quit)
  • [22:05:07] * alancam (~a-campbel@nat/ti/x-xzpqsamzlnswofwg) has joined #beagle
  • [22:06:53] * mza (~mza@2001:470:dc88:2:21f:e2ff:fe10:3fa) has joined #beagle
  • [22:12:44] * awozniak (~awozniak@76.205.222.173) Quit (Quit: Leaving)
  • [22:28:19] * DarrenE (~darreneth@nat/ti/x-gmwtkyxobwcwnzuc) Quit (Ping timeout: 240 seconds)
  • [22:30:04] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [22:33:21] * coppermine (~coppermin@modemcable042.177-176-173.mc.videotron.ca) has joined #beagle
  • [22:33:38] <coppermine> im deciding between a bagleboard or gumstix for linux embedded projects
  • [22:35:12] * grund (~grund@firebug.buglabs.net) has left #beagle
  • [22:35:47] * peabody124_ (~peabody12@128.249.96.124) has joined #beagle
  • [22:35:48] * peabody124 (~peabody12@128.249.96.21) Quit (Read error: Connection reset by peer)
  • [22:35:48] * peabody124_ (~peabody12@128.249.96.124) Quit (Read error: Connection reset by peer)
  • [22:36:07] * peabody124 (~peabody12@128.249.96.21) has joined #beagle
  • [22:38:54] * hookem (43099bef@gateway/web/freenode/ip.67.9.155.239) Quit (Quit: Page closed)
  • [22:40:34] * BThompson (~a0193480@nat/ti/x-doqkxrvldsnydyiy) Quit (Remote host closed the connection)
  • [22:41:11] * balister_ (~balister@adsl-75-37-22-143.dsl.pltn13.sbcglobal.net) has joined #beagle
  • [22:41:47] * Crofton (~balister@adsl-75-37-22-143.dsl.pltn13.sbcglobal.net) Quit (Ping timeout: 255 seconds)
  • [22:55:22] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [22:58:28] * brijesh (~Brijesh@nat/ti/x-fcajjjtjsamggrsl) Quit (Quit: Leaving)
  • [23:00:46] * jconnolly is now known as jconnolly|away
  • [23:04:57] * coppermine (~coppermin@modemcable042.177-176-173.mc.videotron.ca) Quit (Quit: Lost terminal)
  • [23:06:15] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera)
  • [23:11:14] * PsyXhO (9206b95b@gateway/web/freenode/ip.146.6.185.91) has joined #beagle
  • [23:12:49] <PsyXhO> hey, quick question: I am trying to use a RF keyboard that has a USB dongle. When I plug the dongle straight into the beagleboard's USB port, it does not get power, but when I plug it into a USB hub which is connected to the port on the beagleboard, it works fine. The USB hub is not externally powered. Any ideas what could be causing this?
  • [23:14:41] <aholler_> the stick is usb 1
  • [23:18:23] * gdm (~gdm@186.18.69.144) Quit (Ping timeout: 276 seconds)
  • [23:18:52] * mrj10 (~mrj10@mjlap.crhc.uiuc.edu) Quit (Ping timeout: 272 seconds)
  • [23:19:12] * gdm (~gdm@186.18.69.144) has joined #beagle
  • [23:23:28] * mrj10 (~mrj10@63.252.64.254) has joined #beagle
  • [23:24:22] <PsyXhO> what is usb 1?
  • [23:24:36] <PsyXhO> oh, as opposed to usb 2.0?
  • [23:25:09] * Crazymik3 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [23:25:45] <cwillu_at_work> PsyXhO, yep. It gets power, it just can't talk :p
  • [23:25:55] <cwillu_at_work> (and so remarkably, it doesn't use any power :p)
  • [23:26:02] <PsyXhO> ouch
  • [23:26:07] <PsyXhO> is there anything I can do?
  • [23:26:11] <cwillu_at_work> PsyXhO, use a hub
  • [23:26:26] <PsyXhO> I don't want to put an entire hub on a tiny helicopter :(
  • [23:26:32] <PsyXhO> it can barely lift itself :P
  • [23:26:44] <cwillu_at_work> you could use the otg port
  • [23:27:06] <aholler_> or get a usb 2.x dongle
  • [23:27:16] <cwillu_at_work> aholler_, probably easier said than done :p
  • [23:27:29] <PsyXhO> interesting
  • [23:27:32] <PsyXhO> the otg port will work?
  • [23:27:33] <cwillu_at_work> it's not a network dongle, it's the matching dongle for a keyboard
  • [23:27:46] <cwillu_at_work> PsyXhO, yes, assuming there's sufficient power, and you don't run into any driver troubles
  • [23:27:58] <PsyXhO> alright, excellent, I'll try that
  • [23:28:00] <PsyXhO> thanks a bunch :)
  • [23:28:17] * coppermine (~coppermin@modemcable042.177-176-173.mc.videotron.ca) has joined #beagle
  • [23:28:20] * PsyXhO (9206b95b@gateway/web/freenode/ip.146.6.185.91) Quit (Quit: Page closed)
  • [23:28:29] <cwillu_at_work> you'll need to get a mini-a to mini-b cable, or a bad bad cable that shouldn't exist + shorting out the tiny sawtooth pad on the underside of the beagle
  • [23:28:30] <cwillu_at_work> ...
  • [23:28:41] <coppermine> is it possible to get the beagleboard to run under 2 watts with wifi?
  • [23:28:51] <coppermine> can the cpu clock speed be decreased via software?
  • [23:29:13] <cwillu_at_work> I don't think the cpu speed helps you there, but I could be mistaken
  • [23:29:21] <coppermine> generally it does on small devices
  • [23:29:35] <cwillu_at_work> depends on lots of things
  • [23:29:37] <coppermine> but cortex is effecient allready
  • [23:29:46] <cwillu_at_work> I just have a vague recollection that it didn't help in this specific case
  • [23:31:22] * silesh (~silesh@nat/ti/x-vwpgvhtloeasuqkl) has joined #beagle
  • [23:31:39] <coppermine> or can i disable certain onboard subsystems that i dont need?
  • [23:31:39] <jonpry> if you reduce the clock speed it will save some power. after reducing it you can also reduce the core voltage which will save a lot more
  • [23:31:41] <coppermine> to save power
  • [23:32:10] <coppermine> not sure if gumstix is better for power consumption
  • [23:32:13] <jonpry> and you can also enable reverse body bias if you have an xm
  • [23:32:56] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [23:33:08] * silesh (~silesh@nat/ti/x-vwpgvhtloeasuqkl) Quit (Client Quit)
  • [23:33:29] <coppermine> in any case if it can be powered via usb, usb is 5V with 500ma max right
  • [23:33:32] <coppermine> so 2.5watts total
  • [23:33:42] <jonpry> it can't be powered by usb
  • [23:33:46] <coppermine> oh
  • [23:34:19] <cwillu_at_work> coppermine, powered via usb, you're running very thin on available power; basically any other peripherals are going to put you over
  • [23:45:32] * peabody124 (~peabody12@128.249.96.21) Quit (Quit: peabody124)
  • [23:46:40] * CruNcher (~luls_lol@188.107.66.213) has joined #beagle
  • [23:52:31] <ds2> that 500mA is only available for sure if you enumerate and get granted 500mA privs.
  • [23:53:25] * CruNcher (~luls_lol@188.107.66.213) Quit (Ping timeout: 245 seconds)
  • [23:59:08] * coppermine (~coppermin@modemcable042.177-176-173.mc.videotron.ca) has left #beagle
  • [23:59:19] * Dead1nside (~Dead1nsid@78.86.212.180) has joined #beagle
  • [23:59:32] * CruNcher (~luls_lol@dslb-094-219-149-231.pools.arcor-ip.net) has joined #beagle
  • [23:59:42] * jayabharath (~jayabhara@nat/ti/x-ukygvdhzdkfctida) Quit (Remote host closed the connection)