[00:06:51] * djlewis (~djlewis@75.15.67.41) has joined #beagle
[00:10:56] * jrmuizel (~jrmuizel@nat/mozilla/x-qehcwtvxppupcuvk) Quit (Read error: Connection reset by peer)
[00:11:12] * jrmuizel (~jrmuizel@nat/mozilla/x-dgkzgjizntyiihbz) has joined #beagle
[00:20:41] * katie (~katierh@nat/ti/x-kpvokszuonnvqxbv) has joined #beagle
[00:20:56] * jayabharath (~jayabhara@nat/ti/x-flunxfmkymshtvif) has joined #beagle
[00:26:46] * mmarker (~crichton@ool-4354a976.dyn.optonline.net) has joined #beagle
[00:27:39] <ds2> is it time to play name to ways to get OE to build a different kernel? :D
[00:28:43] <mmarker> Simple
[00:28:46] <mmarker> Really, it is.
[00:28:52] <mmarker> For a beagleboard?
[00:29:46] <mmarker> set PREFERRED_PROVIDER_virtual/kernel to whatever you want.
[00:29:49] <mmarker> in your local.conf
[00:30:21] <mmarker> At least, that should work, in theory.
[00:31:02] <mmarker> To check, you can get bitbake to cough up dot files on what it'll build
[00:31:14] <mmarker> make sure your kernel package is there. then you're G2G
[00:33:05] * jayabharath (~jayabhara@nat/ti/x-flunxfmkymshtvif) Quit (Ping timeout: 276 seconds)
[00:34:42] * Gaston|DSP (~Gaston@ua-83-227-239-139.cust.bredbandsbolaget.se) Quit (Ping timeout: 265 seconds)
[00:37:37] * dl9pf_ (~quassel@p5B2136BA.dip.t-dialin.net) has joined #beagle
[00:38:59] * dl9pf (~quassel@opensuse/member/dl9pf) Quit (Ping timeout: 276 seconds)
[00:39:31] * Ceriand|work1 (~Ceriand@chemgroups.ucdavis.edu) Quit (Quit: Leaving.)
[00:44:08] <ds2> execllent, can you name another? :D
[00:44:47] * rlameiro (~lameiro@87.196.166.13) Quit (Quit: Saindo)
[00:45:21] <mmarker> linux-omap is one
[00:45:29] <mmarker> I think linux-omap-psp builds by default
[00:45:42] <mmarker> you can also build the packages by: "bitbake linux-omap"
[00:46:01] <mmarker> they need not be part of an image. The OE wiki has a good bitbake tutorial
[00:46:03] <ds2> was that so hard that people have to complain to a list on how to build it? :D
[00:46:16] * ds2 checks to make sure it is not Koen in disguises ;)
[00:46:30] <mmarker> Heh.
[00:46:40] <mmarker> I'm just trying to figure out how to get the die id off the OMAP cpu
[00:46:51] <mmarker> the docs I have say the addy that -uboot pokes is "Reserved"
[00:46:55] <mmarker> I never like that
[00:46:57] <ds2> think there is code to do that already
[00:47:04] <mmarker> Not in kernelspace
[00:47:04] <ds2> oh you want something official? :D
[00:47:14] <mmarker> Yea, since the kernel seems to remap things
[00:48:07] * alancam (~a-campbel@nat/ti/x-wturusbhtkxbzuzl) has joined #beagle
[00:48:09] <ds2> but it should be a simple offset... but the issue might be certain things get locked out after some seq gets execute (guessing here)
[00:50:21] <mmarker> It looks to be "L4"
[00:50:28] <mmarker> which if I'm reading this right.
[00:50:43] <mmarker> well, let me be honest, I am familiar with ARM
[00:50:50] <mmarker> OMAP as an ARM implementation, notsomuch
[00:56:28] * likewise_ (~likewise@82-170-243-215.ip.telfort.nl) Quit (Quit: likewise_)
[00:57:32] * likewise_ (~likewise@82-170-243-215.ip.telfort.nl) has joined #beagle
[00:57:34] * likewise_ (~likewise@82-170-243-215.ip.telfort.nl) Quit (Client Quit)
[00:58:52] * likewise_ (~likewise@82-170-243-215.ip.telfort.nl) has joined #beagle
[00:58:52] * likewise_ (~likewise@82-170-243-215.ip.telfort.nl) Quit (Client Quit)
[00:59:13] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
[00:59:17] * dougztr (~dougztr__@2001:4830:16e9:0:1183:cac3:c17f:160e) Quit (Quit: Leaving)
[00:59:26] * mmarker (~crichton@ool-4354a976.dyn.optonline.net) Quit (Quit: Leaving)
[01:01:16] * khasim (~a0393720@192.163.20.231) has joined #beagle
[01:02:18] * alancam (~a-campbel@nat/ti/x-wturusbhtkxbzuzl) Quit (Ping timeout: 240 seconds)
[01:03:05] * likewise (~chatzilla@82-170-243-215.ip.telfort.nl) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.8/20100723084720])
[01:05:17] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
[01:06:51] * NishanthMenon (~nmenon@nat/ti/x-vbdexshpaemhjtgd) Quit (Quit: Ex-Chat)
[01:13:22] * Zoxc (~zoxc@ti0128a380-dhcp0073.bb.online.no) Quit ()
[01:20:23] * Openfree` (~Openfreer@116.228.88.131) Quit (Remote host closed the connection)
[01:21:07] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
[01:21:17] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Remote host closed the connection)
[01:26:26] * jconnolly (~jconnolly@firebug.buglabs.net) Quit (Remote host closed the connection)
[01:26:45] * vinit (~vinit@202.3.77.239) Quit (Quit: Leaving)
[01:26:48] * jconnolly (~jconnolly@firebug.buglabs.net) has joined #beagle
[01:30:46] * ppotera_ (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: Leaving)
[01:35:55] * pH5_ (~ph5@e178209002.adsl.alicedsl.de) has joined #beagle
[01:36:09] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) Quit (Quit: Leaving)
[01:39:18] * pH5 (~ph5@e178217184.adsl.alicedsl.de) Quit (Ping timeout: 245 seconds)
[01:40:31] * Openfree` (~Openfreer@116.228.88.131) has joined #beagle
[01:51:40] * mmarker (4354a976@gateway/web/freenode/ip.67.84.169.118) has joined #beagle
[01:53:49] * GrizzlyAdams (~Grizzly@ip98-184-88-41.mc.at.cox.net) has joined #beagle
[01:54:34] * ogra (~ogra@ubuntu/member/ogra) Quit (Read error: Connection reset by peer)
[01:55:11] * ogra (~ogra@ubuntu/member/ogra) has joined #beagle
[02:00:06] * jayabharath (~jayabhara@nat/ti/x-hjjhloavejuiutcz) has joined #beagle
[02:16:18] <mmarker> Oh good, get the right datasheet, and everything makes sense.
[02:18:07] * jayabharath (~jayabhara@nat/ti/x-hjjhloavejuiutcz) Quit (Ping timeout: 265 seconds)
[02:24:14] * jconnolly is now known as jconnolly|away
[02:40:35] * Openfree` (~Openfreer@116.228.88.131) Quit (Remote host closed the connection)
[02:51:34] * Openfree` (~Openfreer@116.228.88.131) has joined #beagle
[02:53:44] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
[03:03:47] * cody (~cody@dslb-084-056-098-146.pools.arcor-ip.net) Quit (Ping timeout: 265 seconds)
[03:05:25] * cody (~cody@dslb-084-056-114-222.pools.arcor-ip.net) has joined #beagle
[03:23:37] * katie (~katierh@nat/ti/x-kpvokszuonnvqxbv) Quit ()
[03:27:35] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Remote host closed the connection)
[03:27:54] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
[03:34:29] * khasim (~a0393720@192.163.20.231) Quit (Ping timeout: 265 seconds)
[03:36:51] * djlewis (~djlewis@75.15.67.41) Quit (Quit: Leaving.)
[03:39:09] * mmarker (4354a976@gateway/web/freenode/ip.67.84.169.118) Quit (Quit: Page closed)
[03:39:46] * jayabharath (~jayabhara@nat/ti/x-cjnnmkigougcklne) has joined #beagle
[03:43:48] * jayabharath (~jayabhara@nat/ti/x-cjnnmkigougcklne) Quit (Ping timeout: 240 seconds)
[03:52:56] * raster (raster@enlightenment/developer/raster) has joined #beagle
[04:00:37] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) Quit (Read error: Connection reset by peer)
[04:13:34] * emeb (~ericb@ip72-223-86-148.ph.ph.cox.net) has left #beagle
[04:14:45] * pting (~pting@adsl-99-32-245-41.dsl.lsan03.sbcglobal.net) Quit (Quit: Ex-Chat)
[04:19:13] * jayabharath (~jayabhara@nat/ti/x-aeyqwflqrfybkgev) has joined #beagle
[04:24:39] * katie (~katierh@nat/ti/x-vcbwuhdqrfsubazb) has joined #beagle
[04:29:57] * katie (~katierh@nat/ti/x-vcbwuhdqrfsubazb) Quit ()
[04:35:16] * pcacjr is now known as pcacjrathome
[04:35:31] * Openfree` (~Openfreer@116.228.88.131) Quit (Ping timeout: 240 seconds)
[04:37:25] * Openfree` (~Openfreer@116.228.88.131) has joined #beagle
[04:37:25] * Openfree` (~Openfreer@116.228.88.131) Quit (Remote host closed the connection)
[04:38:27] * Openfree` (~Openfreer@116.228.88.131) has joined #beagle
[04:44:19] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) has joined #beagle
[04:53:17] * emeb|mac (~ericb@ip72-223-86-148.ph.ph.cox.net) has joined #beagle
[04:56:26] * Artanis (Artanis@159.108.165.83.dynamic.mundo-r.com) Quit (Ping timeout: 264 seconds)
[05:00:53] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Ping timeout: 276 seconds)
[05:02:29] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Ping timeout: 255 seconds)
[05:05:04] * rbarraud_ (~rbarraud@118-92-27-88.dsl.dyn.ihug.co.nz) has joined #beagle
[05:05:13] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
[05:05:18] * rbarraud (~rbarraud@118-93-163-163.dsl.dyn.ihug.co.nz) Quit (Ping timeout: 240 seconds)
[05:07:57] * PBansal (~pbansal@nat/ti/x-crqcbxhxorwhavik) has joined #beagle
[05:09:00] * akumar (~mm4@122.170.58.207) has joined #beagle
[05:09:13] * mrc3 (~mrc3@nat/ti/x-muldbosqtqhzxblu) Quit (Remote host closed the connection)
[05:09:13] * _roger_1 (~a0740758@nat/ti/x-xznswlqxgbpzydwv) Quit (Remote host closed the connection)
[05:09:13] * niclas (~niclas@nat/ti/x-ppuibeuhuqjlayyg) Quit (Remote host closed the connection)
[05:09:13] * PBansal (~pbansal@nat/ti/x-crqcbxhxorwhavik) Quit (Remote host closed the connection)
[05:09:30] * PBansal (~pbansal@nat/ti/x-epcfoeemtkcnhetj) has joined #beagle
[05:09:30] * niclas (~niclas@nat/ti/x-wllxjtwxmsgmpowu) has joined #beagle
[05:09:38] * mrc3 (~mrc3@nat/ti/x-utmfojeadnptdnpj) has joined #beagle
[05:10:26] * _roger_ (~a0740758@nat/ti/x-koaicxydjmxhiezz) has joined #beagle
[05:13:16] * Artanis (Artanis@159.108.165.83.dynamic.mundo-r.com) has joined #beagle
[05:15:36] * mrc3 (~mrc3@nat/ti/x-utmfojeadnptdnpj) Quit (Remote host closed the connection)
[05:15:54] * mrc3 (~mrc3@nat/ti/x-ojpzsgiaexokvjzk) has joined #beagle
[05:16:35] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera)
[05:16:41] * russ (foobar@ip70-176-251-1.ph.ph.cox.net) has joined #beagle
[05:18:02] * Artanis (Artanis@159.108.165.83.dynamic.mundo-r.com) Quit (Ping timeout: 264 seconds)
[05:24:25] * alancam (~a-campbel@nat/ti/x-jetpvinnbdvqrqql) has joined #beagle
[05:25:14] * Artanis (Artanis@159.108.165.83.dynamic.mundo-r.com) has joined #beagle
[05:36:27] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) has joined #beagle
[05:36:48] * GrizzlyAdams (~Grizzly@ip98-184-88-41.mc.at.cox.net) Quit (Quit: Leaving.)
[05:38:30] * russ (foobar@ip70-176-251-1.ph.ph.cox.net) Quit (Ping timeout: 272 seconds)
[05:39:26] * jayabharath (~jayabhara@nat/ti/x-aeyqwflqrfybkgev) Quit (Ping timeout: 276 seconds)
[05:40:30] * jpirko (~jirka@ip-89-102-9-227.net.upcbroadband.cz) has joined #beagle
[05:51:40] * amitk (~amit@a91-154-124-12.elisa-laajakaista.fi) has joined #beagle
[05:53:36] * matthsu (~matt@61-30-10-70.static.tfn.net.tw) has joined #beagle
[05:57:39] <ds2> '
[06:00:37] <emeb|mac> "
[06:04:57] <av500> '''
[06:05:47] <dm8tbr> .??'??.
[06:08:01] * niclas (~niclas@nat/ti/x-wllxjtwxmsgmpowu) Quit (Remote host closed the connection)
[06:08:27] * niclas (~niclas@nat/ti/x-eyxnspwghvrxaxyh) has joined #beagle
[06:09:19] * TheUni (~quassel@xbmc/staff/theuni) has left #beagle
[06:17:53] * niclas (~niclas@nat/ti/x-eyxnspwghvrxaxyh) Quit (Remote host closed the connection)
[06:18:10] * niclas (~niclas@nat/ti/x-kqhhwnfqeayapide) has joined #beagle
[06:27:04] * lag_ (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) has joined #beagle
[06:35:37] * franktango (~a0746747@nat/ti/x-uecuurjhzhioamql) has joined #beagle
[06:36:35] * jrmuizel (~jrmuizel@nat/mozilla/x-dgkzgjizntyiihbz) Quit (Read error: Operation timed out)
[06:41:07] * calculus (~calculus@gentoo/user/calculus) Quit (Ping timeout: 252 seconds)
[06:51:33] * drakkan1000 (~drakkan@62.123.237.207) has joined #beagle
[06:52:12] * beep (415c1b40@gateway/web/freenode/ip.65.92.27.64) has joined #beagle
[06:53:05] * beep (415c1b40@gateway/web/freenode/ip.65.92.27.64) Quit (Client Quit)
[06:56:48] * emeb|mac (~ericb@ip72-223-86-148.ph.ph.cox.net) Quit (Ping timeout: 245 seconds)
[06:58:27] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
[06:58:55] * tassleho1f (~Mich@147.84-49-231.nextgentel.com) has joined #beagle
[07:01:56] * alancam (~a-campbel@nat/ti/x-jetpvinnbdvqrqql) Quit ()
[07:03:04] * courville (~courville@archos.rain.fr) has joined #beagle
[07:04:55] * mza__ (~mza@2001:470:dc88:2:21f:e2ff:fe10:3fa) has joined #beagle
[07:08:31] * Proxyles (~henrik@c-9f93e255.56-4-64736c14.cust.bredbandsbolaget.se) has joined #beagle
[07:10:04] * khasim (~a0393720@192.163.20.231) has joined #beagle
[07:13:05] * _koen_ (~x0115699@nat/ti/x-qiwdsbvrclmpybba) has joined #beagle
[07:15:17] * ZeZu (~ZeZu@in-67-236-218-68.dhcp.embarqhsd.net) Quit ()
[07:15:37] * woglinde (~heinold@g225074146.adsl.alicedsl.de) has joined #beagle
[07:17:22] * harsh (~harsh@122.248.161.59) has joined #beagle
[07:17:31] <woglinde> good morning
[07:19:27] * lifeeth (~praneeth@unaffiliated/lifeeth) has joined #beagle
[07:24:33] <_koen_> good morning all
[07:25:47] <av500> gm
[07:26:14] <woglinde> hi koen and av500
[07:27:23] * hrw|gone is now known as hrw
[07:27:32] * ucasano (~ucasano@95.231.79.71) has joined #beagle
[07:27:40] * akumar (~mm4@122.170.58.207) Quit (Ping timeout: 252 seconds)
[07:27:53] * a (4c0e3ef8@gateway/web/freenode/ip.76.14.62.248) has joined #beagle
[07:28:31] <a> hi all, i'm trying to install ubuntu and I'm at the install screen of "Choose Language" but my keyboard is not working
[07:28:48] <a> if I use a power hub or just plug in the keyboard directly
[07:28:52] <hitlin37> why do not required to push pop neon reg,d way we do for core reg
[07:29:18] <a> could someone point me into the right direction ?
[07:29:42] * calculus (~calculus@gentoo/user/calculus) has joined #beagle
[07:31:42] <woglinde> a do you have the serial console connected?
[07:32:58] <a> nope
[07:33:06] <a> trying to avoid it if possible
[07:33:32] <woglinde> but now you could use it to look whats wrong with the keyboard
[07:34:29] <a> ya I guess ill do that tomorrow, just need to find some serial cables
[07:36:18] <a> http://elinux.org/BeagleBoard#OTG
[07:37:55] <mru> why are people so averse to serial cables?
[07:38:06] <woglinde> dont know
[07:38:08] <a> so I do need to short the OTC to enable host keyboard
[07:38:14] <woglinde> the cable saves life
[07:38:38] <a> just moved to a new apt and need to unpack a bunch of boxes to find or make one, thats my personal reason
[07:40:58] <a> still not totally sure thats what I want to do, I dont want the OTG to be in host mode, i want to connect a keyboard to P7 USB HOST
[07:41:19] <a> maybe I'm missing something, a keyboard should be able to connect to that without any addtional configuration right?
[07:43:26] <av500> hmm, the XM default image on the uSD is console only?
[07:44:05] <koen> it's only the ramdisk image, nothing in the ext2 partition yet
[07:44:06] * pcacjr (~pcacjr@187.78.104.152) has joined #beagle
[07:44:07] * pcacjr (~pcacjr@187.78.104.152) Quit (Changing host)
[07:44:07] * pcacjr (~pcacjr@unaffiliated/pcacjr) has joined #beagle
[07:44:18] <av500> what can i put quickly?
[07:44:40] * av500 finds a 256MB uSD...
[07:44:44] <av500> very helpful
[07:45:10] <koen> generate one with narcissus, untar to second partition
[07:45:14] <mru> av500: such exist?
[07:45:22] <av500> yes
[07:45:28] <mru> +still
[07:45:41] <av500> well, it sat in my office for 1-2 ys i guess
[07:45:43] <woglinde> I have 128 mb here
[07:45:48] <mru> come to think of it, I have a 32MB one somewhere
[07:45:48] <av500> you win
[07:45:53] <av500> mru wins
[07:45:55] <mru> from the time before they were called uSD
[07:46:04] <mru> came with a phone
[07:46:06] <koen> transhflash
[07:46:08] <koen> -h
[07:46:12] <mru> trashflash
[07:46:19] * av500 looks for his smart media cards
[07:46:43] <dm8tbr> 8M CF anyone?
[07:46:48] <av500> ok, here: 2MB smart media!!!
[07:47:13] <woglinde> av500 wins
[07:47:17] <av500> YES!
[07:48:18] * mru thinks of digital cameras with floppy drives
[07:48:20] * pcacjrathome (~pcacjr@unaffiliated/pcacjr) Quit (Ping timeout: 272 seconds)
[07:48:41] <av500> mavica
[07:50:27] <Animule> haha
[07:51:18] * lag_ (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) Quit (Quit: Leaving)
[07:55:12] <av500> here: http://www.flickr.com/photos/av500/4995504604/
[07:55:29] <mru> av500: and the floppy adaptor?
[07:55:37] <av500> dont have one :(
[07:55:58] <av500> i bought some SMs on ebay when I implemented reading from them
[07:57:22] <mru> those were dark times
[08:02:18] * gdm (~gdm@186.19.159.138) Quit (Ping timeout: 240 seconds)
[08:05:45] <av500> mru: http://www.flickr.com/photos/av500/4994910683/
[08:09:29] <mru> nice collection
[08:09:47] <mru> hmm, wonder where my 32MB memorystick has gone
[08:09:55] <mru> I'm pretty sure I had one
[08:10:03] <av500> i have a CF gprs modem somewhere too
[08:15:03] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Read error: Operation timed out)
[08:15:29] <kblin> mru: I've used a digicam with a floppy drive at school
[08:16:08] <kblin> that was..;. quite a while ago
[08:16:25] <mru> kblin: I remember seeing one some time in the 90s
[08:17:02] <kblin> sounds about right :)
[08:18:29] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) has joined #beagle
[08:18:38] * akumar (~mm4@122.170.58.207) has joined #beagle
[08:18:53] <av500> floppy, pah, still video rules: http://www.mrmartinweb.com/digital.html
[08:19:33] <av500> I once had it in my hands
[08:20:24] <mru> "Video Still" hmm...
[08:20:43] * pcacjr__ (~pcacjr@187.78.104.152) has joined #beagle
[08:21:06] <av500> yep
[08:21:14] <av500> it basically recorded one video frame
[08:21:23] <av500> and played that back in a loop
[08:22:48] * akumar (~mm4@122.170.58.207) Quit (Ping timeout: 240 seconds)
[08:22:52] * akumar (~mm4@122.170.58.207) has joined #beagle
[08:25:02] * pcacjr (~pcacjr@unaffiliated/pcacjr) Quit (Ping timeout: 276 seconds)
[08:27:21] * jpirko (~jirka@ip-89-102-9-227.net.upcbroadband.cz) Quit (Quit: Leaving)
[08:27:36] * jpirko (~jirka@ip-89-102-9-227.net.upcbroadband.cz) has joined #beagle
[08:28:05] * florian_kc (~fuchs@Maemo/community/contributor/florian) has joined #beagle
[08:28:46] * florian_kc is now known as florian
[08:30:23] * Belna (~Thomas@DSL01.212.114.252.242.ip-pool.NEFkom.net) Quit (Ping timeout: 276 seconds)
[08:30:50] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
[08:38:26] * jkridner|work1 (~a0321898@nat/ti/x-yyxgidcgnmrivyfn) Quit (Ping timeout: 264 seconds)
[09:03:18] * Belna (~Thomas@DSL01.212.114.252.242.ip-pool.NEFkom.net) has joined #beagle
[09:08:31] * akumar (~mm4@122.170.58.207) Quit (Ping timeout: 252 seconds)
[09:13:39] * jpsaman_ (~jpsaman@2001:4cb8:17:1:21d:9ff:fec6:18ac) has joined #beagle
[09:15:29] * ucasano (~ucasano@95.231.79.71) Quit (Quit: ucasano)
[09:17:44] * killring (~killring@76.226.192.190) Quit (Quit: killring)
[09:17:48] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Ping timeout: 272 seconds)
[09:22:57] * chrisAVR (d456d2d3@gateway/web/freenode/ip.212.86.210.211) Quit (Quit: Page closed)
[09:26:08] * akumar (~mm4@122.170.30.152) has joined #beagle
[09:26:42] * nullobject (~nullobjec@124-168-111-12.dyn.iinet.net.au) has joined #beagle
[09:28:21] * Entasis (~Jarred@ppp121-45-8-229.lns20.adl2.internode.on.net) has joined #beagle
[09:31:31] * raster (raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
[09:44:07] * amitk is now known as amitk-afk
[09:56:15] * koen listens to another round of hold music
[09:56:59] <av500> unstable? stable? next-eglibc? next?
[09:57:24] <dm8tbr> penultimate?
[09:57:32] <av500> not offered
[09:57:54] <koen> av500: unstable is the best choice currently
[09:57:57] <av500> ok
[10:01:55] * gdm (~gdm@186.19.159.138) has joined #beagle
[10:02:12] * koen takes out 'stable' from the beagle list
[10:06:09] * fabiomssilva (~fabiomssi@194.215.90.130) has joined #beagle
[10:07:31] <av500> koen: duke3d is "X"
[10:13:56] <koen> indeed, let me look into that
[10:21:32] * tassleho1f (~Mich@147.84-49-231.nextgentel.com) Quit (Quit: Lost terminal)
[10:26:37] * woglinde (~heinold@g225074146.adsl.alicedsl.de) Quit (Ping timeout: 252 seconds)
[10:28:35] * ghexpert (~ghexpert@87-194-17-20.bethere.co.uk) has joined #beagle
[10:28:49] * ghexpert (~ghexpert@87-194-17-20.bethere.co.uk) has left #beagle
[10:29:15] <_koen_> if tomcat shows up, the SR patches will hit angstrom today
[10:29:58] <mru> and if he doesn't?
[10:30:51] <av500> _koen_: the "x" makes it fail?
[10:30:59] <av500> coz it stopped updatin now
[10:31:52] <_koen_> no, it will continue
[10:32:13] <av500> Current uncompressed image size: 692M
[10:32:21] <av500> I'll wait
[10:32:31] <_koen_> it's running bzip2 on that, takes a while
[10:34:37] <av500> k
[10:34:56] <av500> a line sayin "bzipping.." might help :)
[10:36:45] <_koen_> jkridner was going to have a look at giving better status feedback
[10:37:35] <av500> k
[10:37:39] <av500> its done now, lets d/l
[10:46:22] * nullobject (~nullobjec@124-168-111-12.dyn.iinet.net.au) Quit (Remote host closed the connection)
[10:48:29] * amitk-afk is now known as amitk
[10:49:29] * rbarraud_ (~rbarraud@118-92-27-88.dsl.dyn.ihug.co.nz) Quit (Ping timeout: 276 seconds)
[10:49:37] <koen> http://xkcd.com/303/
[10:54:48] * silwer (7aa9fa60@gateway/web/freenode/ip.122.169.250.96) Quit (Ping timeout: 252 seconds)
[10:59:40] * woglinde_ (~heinold@f052235224.adsl.alicedsl.de) has joined #beagle
[11:00:52] * likewise (~likewise@82-170-243-215.ip.telfort.nl) has joined #beagle
[11:04:57] * rcranetx (~rcranetx@nat/ti/x-qieebyacreewwqlk) Quit (Quit: Leaving.)
[11:10:13] * rodrigo_golive (c8116f03@gateway/web/freenode/ip.200.17.111.3) has joined #beagle
[11:11:45] * jpirko (~jirka@ip-89-102-9-227.net.upcbroadband.cz) Quit (Quit: Leaving)
[11:31:07] * ghexpert (~ghexpert@87-194-17-20.bethere.co.uk) has joined #beagle
[11:32:56] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) Quit (Ping timeout: 252 seconds)
[11:33:19] * ghexpert (~ghexpert@87-194-17-20.bethere.co.uk) has left #beagle
[11:35:55] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
[11:37:23] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Client Quit)
[11:40:13] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
[11:40:18] * lifeeth (~praneeth@unaffiliated/lifeeth) Quit (Quit: Up and at 'em, Atom Ant!)
[11:44:00] * hgs (~hgs@82.202-63-132.static.qala.com.sg) has joined #beagle
[11:46:00] * PierreLuc (~PierreLuc@ip-66-254-44-78.mqdsl.megaquebec.net) has joined #beagle
[11:48:07] * NishanthMenon (~nmenon@nat/ti/x-olwyjfbhqjflnyld) has joined #beagle
[11:50:47] * guesto (~zach@d58-107-149-179.sbr28.nsw.optusnet.com.au) has joined #beagle
[11:51:24] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) has joined #beagle
[11:51:53] <hitlin37> how do i use table lookup for a table of say 1024
[11:52:24] * jkridner|work (~a0321898@nat/ti/x-jozcccafmxoqigbl) has joined #beagle
[11:57:55] <hitlin37> for 256 bits it can be done,but how to do it for bigger table
[11:59:31] * harsh (~harsh@122.248.161.59) Quit (Ping timeout: 240 seconds)
[12:01:27] * rcranetx (~rcranetx@nat/ti/x-rdrjtbqhbyfwriga) has joined #beagle
[12:02:33] * mmarker (~AndChat@41.sub-97-247-97.myvzw.com) has joined #beagle
[12:07:48] <hitlin37> or is it i find VTBL very limiting
[12:08:25] * gustavoz (~gustavoz@host57.190-30-11.telecom.net.ar) has joined #beagle
[12:09:21] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera)
[12:09:31] <mmarker> Yay. Kernel panic! Time to figure out why reading the dieid is causing this oops...
[12:12:20] <hitlin37> if someone could suggest a optimized way of using vtbl....
[12:15:40] * markos_ (~markos@athedsl-424403.home.otenet.gr) has joined #beagle
[12:17:27] * kmargar (~markos@athedsl-435203.home.otenet.gr) Quit (Ping timeout: 265 seconds)
[12:19:22] * harsh (~harsh@122.248.163.1) has joined #beagle
[12:24:15] <hitlin37> manual says full table lookup is automatically performed by hardware
[12:31:00] <mru> hitlin37: what are you trying to do?
[12:31:15] * dougztr (~dougztr__@2001:4830:16e9:0:e84f:1949:50b9:4b69) has joined #beagle
[12:31:55] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
[12:33:00] * zodttd2 (~me@user-0c90n12.cable.mindspring.com) has joined #beagle
[12:36:02] * zodttd (~me@user-0c90n12.cable.mindspring.com) Quit (Ping timeout: 264 seconds)
[12:39:55] * harsh (~harsh@122.248.163.1) Quit (Ping timeout: 240 seconds)
[12:42:21] * djlewis (~djlewis@75.15.67.41) has joined #beagle
[12:43:39] <hitlin37> i want to optimize a func.it reads from a table but table is of size 1536
[12:47:15] <hitlin37> i thought of using VTBl but,my lookup is not linear
[12:47:44] <mru> you're stuck with plain ldr unless there's something you're not telling me
[12:48:01] <jkridner> _koen_: better status feedback on what? I can't easily follow the conversation above.
[12:48:59] * jkridner|work (~a0321898@nat/ti/x-jozcccafmxoqigbl) has left #beagle
[12:49:27] * hitlin37_ (6eea0302@gateway/web/freenode/ip.110.234.3.2) has joined #beagle
[12:51:46] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) Quit (Ping timeout: 252 seconds)
[12:52:54] <hitlin37_> yes in one way,as offset is not linear,so can't use vldr
[12:53:55] * hitlin37_ (6eea0302@gateway/web/freenode/ip.110.234.3.2) Quit (Client Quit)
[12:54:16] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) has joined #beagle
[12:54:26] <mru> hitlin37: what size is each entry in the table?
[12:56:34] <hitlin37> outi=ini_var[fd_table[i]],fd_table is int ,rest float
[12:58:57] <koen> jkridner: narcissus progress
[12:59:15] <hitlin37> fd_table[i] returns anything between 0-1536,but not linearly
[12:59:37] <mru> can you show me the entire function?
[12:59:38] * _don_ (~don@nat/ti/x-uuljseeiekjfmquf) has joined #beagle
[13:00:24] <_koen_> jkridner: the -r90 kernel should fix the flakiness when using both cortex and dsp fully
[13:00:42] * _roger_ (~a0740758@nat/ti/x-koaicxydjmxhiezz) Quit (Quit: Leaving.)
[13:01:31] <_koen_> jkridner: _roger_ and I gave up waiting for PSP to push the patches to their git, so we put them in OE for the time being
[13:02:01] <hitlin37> http://pastebin.com/vtHxSpVQ
[13:02:38] <mru> that's not all of it
[13:03:32] <_koen_> goto fatladysings;
[13:04:07] <Crofton> angstrom-gnome-task annoys me
[13:04:30] <Crofton> is there another task or set of tasks I can use to make a basic x!! image
[13:04:35] <hitlin37> const int fd_table ={83, 1996, 1883, 414, 1....
[13:04:49] * mru gives up
[13:05:00] <hitlin37> const int fd_table[1536]
[13:05:48] * _roger_ (~a0740758@nat/ti/x-hxwypwmrfdrxitar) has joined #beagle
[13:05:51] <hitlin37> not sure,if i can share d table
[13:06:08] <mru> the contents of the able do not matter
[13:06:12] <mru> *table
[13:07:19] * ucasano (~ucasano@95.231.79.71) has joined #beagle
[13:07:55] <_koen_> Crofton: depends on what you want
[13:08:24] <hitlin37> http://pastebin.com/qiiby7k6
[13:08:45] <Crofton> a desktop style image
[13:08:54] <Crofton> but lots of candy is not needed
[13:09:03] <Crofton> it will need to support qt at some point
[13:09:09] <_koen_> angstrom-task-gnome doesn't have lots of candy
[13:09:19] <_koen_> angstrom-task-gnome-big does :)
[13:09:32] <_koen_> but you can choose xfce4 or e17 tasks for something lighter
[13:09:37] <mmarker> Can I piggyback on Crof's question... id like the same thing, butbwith good vid playback support
[13:09:40] <_koen_> or twm + xterm
[13:09:57] <_koen_> mmarker: use narcissus, that gives you tons of options
[13:13:08] <mmarker> Gotcha
[13:13:54] <hitlin37> <mru>a hint will do for me
[13:14:24] <mru> what happens after this?
[13:14:26] <Crofton> well, it sucked in firefox
[13:14:31] <mru> does fd_table ever change?
[13:14:32] <Crofton> and isn't building
[13:14:37] <hitlin37> nopes
[13:14:47] <mmarker> Granted, I also tend to roll my own so I can have the additional packages available. But i'm sick like that.
[13:14:50] <Crofton> k
[13:14:51] <mru> do the contents of ini_var[12] ever change?
[13:14:55] <Crofton> let me try those out
[13:14:59] <Crofton> I suck at X
[13:15:04] <Crofton> and vi
[13:15:10] <Crofton> I owe AJ a beer or to
[13:15:12] <Crofton> two
[13:15:44] <koen> Crofton: AJ and cliff owe me a beer for fixing the breakage to nodejs
[13:16:05] <Crofton> I suggest we all get together and buy each other beer
[13:16:10] <mmarker> Lien: and do we have a proper place to send beagle specific kernel patches to? I hope to have my xm using dieid for smsc mac address finally ironed out tonight.
[13:16:22] <koen> mmarker: beagle ml
[13:16:32] * ahaczewski (~ahaczewsk@85.232.239.146) has joined #beagle
[13:16:34] <mru> hitlin37: this looks like it's permuting two arrays
[13:16:47] <mru> where does the input come from?
[13:16:52] <mru> what happens to the output?
[13:16:56] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) has joined #beagle
[13:17:37] <mmarker> Koen: good. Need to fix one last thing and test. Hopefully remove this minor heartburn of mine...
[13:17:58] <hitlin37> yes,it changes
[13:18:18] <mru> and where does it come from?
[13:18:24] <mru> why is this performance-critical?
[13:19:10] <hitlin37> its happening in real-time,so....wanted to reduced loops
[13:19:21] <mru> that doesn't answer my question
[13:19:26] <hitlin37> i mean input data is real time streaming
[13:19:35] <mru> that's rather vague
[13:20:17] * raster (~raster@enlightenment/developer/raster) has joined #beagle
[13:20:23] * raster (~raster@enlightenment/developer/raster) Quit (Remote host closed the connection)
[13:21:45] <hitlin37> it comes as a output from fft
[13:22:12] <hitlin37> n fft is already optimized ,so
[13:22:21] <mmarker> What are you trying to do, and how are you trying to do it.
[13:22:31] * BThompson (~a0193480@nat/ti/x-tjyablnopedfzioa) has joined #beagle
[13:22:35] <mru> hitlin37: and then what?
[13:22:40] * brolin (~brolin@190.71.99.203) has joined #beagle
[13:22:47] <mmarker> Always a good place to start to explain a process.
[13:22:56] <mru> what consumes the permuted arrays?
[13:23:14] <hitlin37> and then goes to soft decision
[13:23:19] <mru> could it be changed to expect the order as output from the fft?
[13:24:34] <hitlin37> my order is 11
[13:26:49] <hitlin37> well
[13:26:57] <hitlin37> code is pretty standard
[13:27:15] <mru> standard code can only give standard performance
[13:27:35] <hitlin37> ya,it gives on x86
[13:27:42] <hitlin37> im doing it on arm
[13:28:30] <mru> it sounds like your pouring in glue between ill-fitting blocks
[13:29:11] <_koen_> gorilla glue?
[13:29:45] <mmarker> Gorilla glue is a fine cyanoacrylate. This sounds more like mint flavored paste
[13:29:55] * jconnolly|away is now known as jconnolly
[13:30:03] <hitlin37> i guess i got my answer
[13:31:17] <_av500_> soft decision?
[13:31:21] <mru> next he'll say he's using openmax
[13:31:22] <mmarker> May want to look at what you're trying to accomplish and see of there's a better way. Maybe getting the fft routine to do some of your work for you.
[13:31:47] * dougztr (~dougztr__@2001:4830:16e9:0:e84f:1949:50b9:4b69) Quit (Quit: Leaving)
[13:31:56] <hitlin37> u r right ,but i have both now,openmax n ffmpeg
[13:33:43] <hitlin37> for d second one thanks to mru
[13:34:41] * dougztr (~doug@2001:4830:16e9:0:219:66ff:fea6:6d5a) has joined #beagle
[13:35:19] * raster (~raster@enlightenment/developer/raster) has joined #beagle
[13:35:28] <_koen_> mmarker: gorlila glue is supposed to be polyurethane based :)
[13:35:51] <_koen_> brokenmax?
[13:35:59] <_av500_> not banana based?
[13:36:39] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) Quit (Quit: Page closed)
[13:38:50] <mmarker> You're right, it is. My bad.
[13:39:04] <mru> banana?
[13:39:50] <mru> bananas was an album by deep purple
[13:40:12] <mmarker> Also a good source of potassium
[13:40:14] <_koen_> early onset friday syndrome
[13:40:46] <mru> and there was a cartoon band called gorillaz
[13:41:23] <_koen_> they had sunshine in a bag
[13:43:05] * dougztr (~doug@2001:4830:16e9:0:219:66ff:fea6:6d5a) Quit (Quit: Lights Out!)
[13:43:39] * dougztr (~doug@2001:4830:16e9:0:219:66ff:fea6:6d5a) has joined #beagle
[13:53:55] * emeb|mac (~ericb@ip72-223-86-148.ph.ph.cox.net) has joined #beagle
[13:56:48] * krtaylor (~krtaylor@72.183.125.181) Quit (Ping timeout: 245 seconds)
[13:57:02] * mmadrigal (~mmadrigal@186.4.15.155) has joined #beagle
[14:00:05] <tsaaps_zzz> one git question: should I be using the branch "stable/2009" or "org.openembedded.dev" ?
[14:00:31] <mru> 2009, when was that?
[14:00:33] <tsaaps_zzz> the latter seems to be more active
[14:00:34] * mru can't remember
[14:00:38] <mru> it was so long ago
[14:00:50] * Openfree` (~Openfreer@116.228.88.131) Quit (Read error: Connection reset by peer)
[14:00:53] <tsaaps_zzz> hehe ;)
[14:01:23] <tsaaps_zzz> I think I was following some old guides when I chacked that out this spring
[14:02:36] * rcranetx (~rcranetx@nat/ti/x-rdrjtbqhbyfwriga) Quit (Quit: Leaving.)
[14:02:37] <tsaaps_zzz> good thing i switched to org.openembedded.dev then i guess
[14:05:14] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) Quit (Quit: ppotera)
[14:06:26] * PBansal (~pbansal@nat/ti/x-epcfoeemtkcnhetj) Quit (Ping timeout: 272 seconds)
[14:06:33] * rcranetx (~rcranetx@nat/ti/x-punjernmhklkwbms) has joined #beagle
[14:07:56] <tsaaps_zzz> oh oh and another, unrelated, question: Where do I find an overview of the changes between the different omap kernel versions? (yes, I'm googling on the side) I don't mean the git logs. Did someone compile an overview list?
[14:08:19] <koen> tsaaps_zzz: go to http://www.angstrom-distribution.org/ and read the first post below the introductions
[14:09:11] * chrisAVR (d456d2d3@gateway/web/freenode/ip.212.86.210.211) has joined #beagle
[14:09:24] * b7500af1 (~GH@2001:468:c80:6104:21d:9ff:feb3:555b) has joined #beagle
[14:09:42] * khasim (~a0393720@192.163.20.231) Quit (Remote host closed the connection)
[14:09:45] <chrisAVR> hi, did someone here manage to run xbmc? except koen, for sure :-)
[14:10:14] <chrisAVR> i run xbmc and just get a black screen with a black mouse with some white surrounding pixels
[14:10:25] <chrisAVR> on angstrom built recently with narcissus
[14:10:44] * khasim (~a0393720@192.163.20.231) has joined #beagle
[14:15:06] <dm8tbr> chrisAVR: that sounds like something I've had on my hardware in a different context
[14:15:15] <dm8tbr> chrisAVR: wrong fb mode
[14:16:11] * ahaczewski_ (~ahaczewsk@85.232.239.146) has joined #beagle
[14:16:11] * ahaczewski (~ahaczewsk@85.232.239.146) Quit (Read error: Connection reset by peer)
[14:16:34] <dm8tbr> chrisAVR: in my situation X11 would go black with only a few pixels visible due to some transparency screw-up in ARGB32 mode
[14:16:55] <dm8tbr> ymmv, just an idea
[14:17:12] * guesto (~zach@d58-107-149-179.sbr28.nsw.optusnet.com.au) has left #beagle
[14:19:30] <chrisAVR> dm8btr: ok any hints on how to change fb-usage? I setup video mode in the boot arguments with 1024x768. Is this ok?
[14:19:40] * lifeeth (~praneeth@unaffiliated/lifeeth) has joined #beagle
[14:19:46] <tasslehoff> hm. would you guys recommend data=ordered or data=writeback for an ext3 partition on my sd-card?
[14:19:50] <chrisAVR> dm8btr: on BB XM btw
[14:19:54] * katie (~katierh@nat/ti/x-nnqmulkvyiudvlvn) has joined #beagle
[14:20:15] * nhg (~a0864305@nat/ti/x-iidetpztxuzvhwkl) has joined #beagle
[14:20:31] <jacekowski> tasslehoff: don't use ext3 on sd card
[14:21:04] <jacekowski> writeback is fast but files sometimes get mangle
[14:21:06] <jacekowski> mangled*
[14:22:41] <tasslehoff> jacekowski: because of wear? I use XorA's script, and that creates and ext3-partition.
[14:23:02] <jacekowski> because it's not filesystem designed to work from flash drives
[14:23:08] <jacekowski> and wear
[14:23:10] * raster (~raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
[14:23:10] <jacekowski> and performance
[14:23:15] <jacekowski> and reliability
[14:23:33] <dm8tbr> chrisAVR: you've got a typo, that doesn't hilight ;)
[14:23:35] <tasslehoff> jacekowski: so ext2 would be better?
[14:23:39] <jacekowski> no
[14:23:41] <jacekowski> worse
[14:23:46] <jacekowski> jffs
[14:23:52] <jacekowski> reiserfs
[14:23:55] <jacekowski> vfat
[14:23:56] <_koen_> heh
[14:24:02] <_koen_> jffs on block devices is stupid
[14:24:09] <_koen_> sd cards to internal wear leveling
[14:24:16] <dm8tbr> chrisAVR: better ask _koen_ what fb mode to use
[14:24:17] * ppotera (~ppotera@99-100-130-116.lightspeed.stlsmo.sbcglobal.net) has joined #beagle
[14:24:25] <jacekowski> _koen_: i'm not so sure
[14:24:27] <_koen_> I use 720p on all my beagles
[14:24:35] <jacekowski> _koen_: i did some tries on sd cards
[14:24:42] <tasslehoff> _koen_: yeah. I chose ext3 after reading about the internal wear leveling
[14:24:53] <jacekowski> _koen_: and constantly writing same sectors kills it faster than writing whole card
[14:25:53] <jacekowski> so that wear leveling is at least suboptimal
[14:26:32] <tasslehoff> On my board, the ext3 partitions are mounted with: (rw,noatime,errors=continue,data=writeback)
[14:27:07] <chrisAVR> _koen_: so setting 720p60 is ok?
[14:27:22] <jacekowski> i've heard that data=writeback is an alias for lose_data_on_powerloss=true
[14:27:31] * hrw (~hrw@chello087207212063.chello.pl) Quit (Ping timeout: 252 seconds)
[14:29:31] * pcacjr (~pcacjr@187.78.104.152) has joined #beagle
[14:29:31] * pcacjr (~pcacjr@187.78.104.152) Quit (Changing host)
[14:29:31] * pcacjr (~pcacjr@unaffiliated/pcacjr) has joined #beagle
[14:29:34] <tasslehoff> jacekowski: hehe.
[14:31:21] * pcacjr__ (~pcacjr@187.78.104.152) Quit (Read error: Connection reset by peer)
[14:31:23] <tasslehoff> I wonder why it mounts as writeback. can't remember doing anything to make it.
[14:31:55] * mmarker (~AndChat@41.sub-97-247-97.myvzw.com) Quit (Ping timeout: 252 seconds)
[14:32:39] <mru> jacekowski: unless you mount it with -o sync, you can always lose data on power failure
[14:33:10] <mru> the idea with journaling is that no matter what happens, you can recover a consistent filesystem easily
[14:33:21] * harsh (~harsh@122.172.28.144) has joined #beagle
[14:33:37] <jacekowski> well, but with data=ordered you may lose data
[14:33:42] <mru> properly written apps use fsync() to ensure important data gets written out
[14:33:44] <jacekowski> with data=writeback you will lose data
[14:33:57] * mmarker (~AndChat@41.sub-97-247-97.myvzw.com) has joined #beagle
[14:34:28] * hrw (~hrw@chello087207212063.chello.pl) has joined #beagle
[14:34:38] <tasslehoff> I changed it to mount with -o noatime instead of -o sync, since it felt dreadfully slow.
[14:34:54] <mru> sync is slow and kills stuff
[14:35:06] <mru> it does a full sync after _every_ write
[14:35:34] <tasslehoff> mru: hm. why is it the default in udev?
[14:35:34] * ahaczewski_ (~ahaczewsk@85.232.239.146) Quit (Read error: Connection reset by peer)
[14:35:39] * ahaczewski_ (~ahaczewsk@85.232.239.146) has joined #beagle
[14:35:54] <mru> sync is not the default anywhere I've seen
[14:35:59] <mru> and udev does not mount stuff
[14:36:39] <mru> idiot systems like gnome like to mount removable media sync so it "works" when idiot users unplug without unmounting
[14:36:49] <mru> gnome, by idiots for idiots
[14:37:32] <tasslehoff> mru: I compile angstrom with OE, and udev has a script for media automounting (/etc/udev/scripts/mount.sh), which does $MOUNT -t auto -o sync $DEVNAME "/media/$name".
[14:37:44] <mru> that's not udev
[14:37:54] <mru> that's a script that someone has hooked up to be called by udev
[14:38:05] <mru> so whatever troll wrote that script is to blame
[14:38:06] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) Quit (Ping timeout: 272 seconds)
[14:38:17] * _roger_ (~a0740758@nat/ti/x-hxwypwmrfdrxitar) Quit (Ping timeout: 276 seconds)
[14:38:29] * mmarker (~AndChat@41.sub-97-247-97.myvzw.com) Quit (Ping timeout: 255 seconds)
[14:38:51] * Zoxc (~zoxc@ti0128a380-dhcp0073.bb.online.no) has joined #beagle
[14:39:19] <tasslehoff> mru: heh. ok. anyway, I changed that script to do -noatime instead, and wonder if I should do make it use data=ordered as well
[14:39:26] * mrc3 (~mrc3@nat/ti/x-ojpzsgiaexokvjzk) Quit (Ping timeout: 276 seconds)
[14:39:54] <tasslehoff> at least that's what I thought of until the discussioned turned to whether ext3 is a good idea at all :)
[14:40:41] * cwillu_at_work (~cwillu@cwillu.com) Quit (Ping timeout: 276 seconds)
[14:42:08] * XorA very quickly removes that sync from script
[14:42:11] * brijesh (~brijesh@nat/ti/x-bbxkmuaytceuecoz) has joined #beagle
[14:42:16] * mrc3 (~mrc3@nat/ti/x-dlmrjvgklbsrgdzh) has joined #beagle
[14:43:41] <tasslehoff> XorA: the mount.sh script I presume?
[14:43:48] <XorA> yeah
[14:43:59] <XorA> sync goes badly wrong when transmisison is running :-)
[14:44:18] <chrisAVR> _koen_: I tried with 720p60 but the monitor remains black.. any hints?
[14:44:43] * _roger_ (~a0740758@nat/ti/x-zzkvisjxospyfttr) has joined #beagle
[14:45:08] <mru> hi _roger_
[14:45:14] <tasslehoff> XorA: do you also have data=writeback on your ext3-partition?
[14:45:20] <XorA> no idea
[14:45:27] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) has joined #beagle
[14:45:44] * cwillu_at_work (~cwillu@cwillu.com) has joined #beagle
[14:47:19] <XorA> my SD loses power no more often than my desktop though
[14:47:28] <XorA> which is about once every 2 years at going rate
[14:47:41] * emeb|mac (~ericb@ip72-223-86-148.ph.ph.cox.net) Quit (Ping timeout: 240 seconds)
[14:49:18] * kerute (~kerute@kerunix.com) Quit (Ping timeout: 245 seconds)
[14:49:42] <Crofton> ok, gicing xfce46 a go
[14:51:24] * prpplague (~danders@nat/ti/x-oqzaoempfiuionrs) has joined #beagle
[14:52:09] * ahaczewski_ (~ahaczewsk@85.232.239.146) Quit (Read error: Connection reset by peer)
[14:52:10] * ahaczewski__ (~ahaczewsk@85.232.239.146) has joined #beagle
[14:53:03] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Ping timeout: 245 seconds)
[14:56:00] * Gareth (~gareth@www.wiked.org) Quit (Ping timeout: 272 seconds)
[14:57:19] * mza__ (~mza@2001:470:dc88:2:21f:e2ff:fe10:3fa) Quit (Read error: Operation timed out)
[14:57:29] * Gareth (~gareth@www.wiked.org) has joined #beagle
[14:58:03] * Entasis (~Jarred@ppp121-45-8-229.lns20.adl2.internode.on.net) Quit (Quit: Leaving)
[14:58:18] * rcranetx (~rcranetx@nat/ti/x-punjernmhklkwbms) Quit (Quit: Leaving.)
[14:59:00] * ahaczewski__ (~ahaczewsk@85.232.239.146) Quit (Ping timeout: 272 seconds)
[15:00:35] * _don_ (~don@nat/ti/x-uuljseeiekjfmquf) Quit (Ping timeout: 240 seconds)
[15:01:20] * _roger_ (~a0740758@nat/ti/x-zzkvisjxospyfttr) Quit (Quit: Leaving.)
[15:01:21] * rcranetx (~rcranetx@nat/ti/x-umkvhhxuliphakng) has joined #beagle
[15:01:30] * pcacjr (~pcacjr@unaffiliated/pcacjr) Quit (Remote host closed the connection)
[15:02:28] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
[15:03:18] * kevinsc (~a0214685@nat/ti/x-upwyvmuzlgogvror) has joined #beagle
[15:07:04] * franktango (~a0746747@nat/ti/x-uecuurjhzhioamql) has left #beagle
[15:07:29] * ahaczewski__ (~ahaczewsk@85.232.239.146) has joined #beagle
[15:12:01] * GrouchoMarx (~gmarx@rrcs-67-53-159-201.west.biz.rr.com) has joined #beagle
[15:13:22] * emeb (~ericb@ip72-223-86-148.ph.ph.cox.net) has joined #beagle
[15:19:11] <tasslehoff> koen: did you have a post somewhere where you had tested read/write speed to sdcards?
[15:19:51] <koen> read speeds match the label, write speeds max out at 6-7MB/s
[15:22:46] * kevinsc (~a0214685@nat/ti/x-upwyvmuzlgogvror) Quit (Remote host closed the connection)
[15:22:54] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Read error: Connection reset by peer)
[15:23:34] * alancam (~a-campbel@nat/ti/x-ggcufdroomxoypie) has joined #beagle
[15:23:46] * franktango (~a0746747@nat/ti/x-jjaomsecgbqgtzma) has joined #beagle
[15:23:51] <tasslehoff> ok. my test gave 4.6MB/s for a class 2 card on Ubuntu using dd on a 1Gb file. I'll test it on my hardware next.
[15:23:55] * hatten| (~chatzilla@pc-21-191.teknik.uu.se) Quit (Ping timeout: 240 seconds)
[15:25:16] * mmarker (~AndChat@138.sub-97-63-191.myvzw.com) has joined #beagle
[15:28:41] * franktango (~a0746747@nat/ti/x-jjaomsecgbqgtzma) Quit (Ping timeout: 240 seconds)
[15:31:18] * lifeeth (~praneeth@unaffiliated/lifeeth) Quit (Ping timeout: 240 seconds)
[15:31:50] <koen> "class X" is useless
[15:32:02] <koen> sandisk realized that and prints MB/s on the label
[15:32:16] <koen> since kingstom class X performs like sandisk class X-3
[15:40:32] * jpsaman_ (~jpsaman@2001:4cb8:17:1:21d:9ff:fec6:18ac) Quit (Quit: Leaving)
[15:42:53] * naeg (~naeg@194.208.239.170) has joined #beagle
[15:44:13] <_koen_> jkridner: ping
[15:44:32] <jkridner> pong, but frantic.
[15:45:15] * rcranetx (~rcranetx@nat/ti/x-umkvhhxuliphakng) Quit (Quit: Leaving.)
[15:45:56] * Ceriand|work1 (~Ceriand@chemgroups.ucdavis.edu) has joined #beagle
[15:46:46] * _don_ (~don@nat/ti/x-noyglxslhxqwxuta) has joined #beagle
[15:46:51] * nhg (~a0864305@nat/ti/x-iidetpztxuzvhwkl) Quit (Quit: Leaving.)
[15:47:39] * mmarker (~AndChat@138.sub-97-63-191.myvzw.com) Quit (Quit: Bye)
[15:48:51] * rcranetx (~rcranetx@nat/ti/x-encsxnqhhljcrplm) has joined #beagle
[15:49:24] * gustavoz (~gustavoz@host57.190-30-11.telecom.net.ar) Quit (Quit: Leaving)
[15:50:09] * kanru (~kanru@118-160-162-37.dynamic.hinet.net) has joined #beagle
[15:53:45] * Proxyles (~henrik@c-9f93e255.56-4-64736c14.cust.bredbandsbolaget.se) Quit (Remote host closed the connection)
[15:57:18] * jayabharath (~jayabhara@nat/ti/x-lbufdkxbnogrgszs) has joined #beagle
[15:57:54] * Centauri_ (568c402b@gateway/web/freenode/ip.86.140.64.43) has joined #beagle
[15:58:38] * alancam (~a-campbel@nat/ti/x-ggcufdroomxoypie) Quit (Ping timeout: 252 seconds)
[15:58:59] * alancam (~a-campbel@nat/ti/x-yxilfhmyoeanywun) has joined #beagle
[15:59:02] * _koen_ (~x0115699@nat/ti/x-qiwdsbvrclmpybba) Quit (Ping timeout: 255 seconds)
[16:01:01] <tasslehoff> koen: ok. I got ~3MB/s on the beagle using if=/dev/zero of=<file-on-ext3-partition>
[16:01:32] <koen> there's something not quite right in the mmc driver for omap3
[16:03:12] <tasslehoff> now if I only had a sandisk class -1 to test with (I have kingston)...
[16:05:20] * likewise (~likewise@82-170-243-215.ip.telfort.nl) Quit (Quit: likewise)
[16:09:07] * cwillu (~cwillu@cwillu.com) Quit (Ping timeout: 240 seconds)
[16:10:10] * cwillu (~cwillu@cwillu.com) has joined #beagle
[16:11:48] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) Quit (Ping timeout: 245 seconds)
[16:11:50] * naeg (~naeg@194.208.239.170) Quit (Ping timeout: 272 seconds)
[16:15:38] * Centauri_ (568c402b@gateway/web/freenode/ip.86.140.64.43) Quit (Ping timeout: 252 seconds)
[16:17:55] * ucasano (~ucasano@95.231.79.71) Quit (Quit: ucasano)
[16:20:15] * ghexpert1 (~ghexpert@87-194-17-20.bethere.co.uk) has joined #beagle
[16:20:18] * ghexpert1 is now known as ghexpert
[16:20:20] * ghexpert (~ghexpert@87-194-17-20.bethere.co.uk) has left #beagle
[16:25:33] * kanru (~kanru@118-160-162-37.dynamic.hinet.net) Quit (Ping timeout: 245 seconds)
[16:26:06] * hrw is now known as hrw|gone
[16:28:09] * PBansal (~pbansal@nat/ti/x-woniohiqwutorpfz) has joined #beagle
[16:28:43] * akumar (~mm4@122.170.30.152) Quit (Ping timeout: 240 seconds)
[16:29:00] * ghexpert (~ghexpert@87-194-17-20.bethere.co.uk) has joined #beagle
[16:29:07] * ghexpert (~ghexpert@87-194-17-20.bethere.co.uk) has left #beagle
[16:35:18] * tsaaps_zzz (~tsaaps@alpha7.isip.uni-luebeck.de) Quit (Ping timeout: 265 seconds)
[16:41:47] * dougztr (~doug@2001:4830:16e9:0:219:66ff:fea6:6d5a) Quit (Quit: Lights Out!)
[16:46:13] * dougztr (~doug@2001:4830:16e9:0:219:66ff:fea6:6d5a) has joined #beagle
[16:52:30] * killring (~killring@76.226.192.190) has joined #beagle
[16:54:53] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
[16:59:47] * djlewis (~djlewis@75.15.67.41) Quit (Quit: Leaving.)
[17:00:36] <ds2> a
[17:02:06] * jrmuizel (~jrmuizel@209.118.182.75) has joined #beagle
[17:02:10] * eFfeM (~frans@j200125.upc-j.chello.nl) has joined #beagle
[17:04:43] * courville (~courville@archos.rain.fr) Quit (Ping timeout: 245 seconds)
[17:06:44] <emeb> s
[17:10:35] * lifeeth (~praneeth@unaffiliated/lifeeth) has joined #beagle
[17:11:38] <mru> d
[17:13:55] * dougztr (~doug@2001:4830:16e9:0:219:66ff:fea6:6d5a) Quit (Quit: ... time for a nap)
[17:14:22] <ogra> f
[17:18:24] * khasim (~a0393720@192.163.20.231) Quit (Quit: Leaving.)
[17:21:07] <emeb> :)
[17:22:48] * ghoti_ (~paul@38.117.126.254) has joined #beagle
[17:25:48] * ghoti (~paul@74-51-38-192.telnetcommunications.com) Quit (Ping timeout: 240 seconds)
[17:32:23] * jrmuizel (~jrmuizel@209.118.182.75) Quit (Quit: jrmuizel)
[17:33:37] * tsaaps (~tsaaps@alpha7.isip.uni-luebeck.de) has joined #beagle
[17:33:48] <_av500_> ???
[17:35:29] * jrmuizel (~jrmuizel@209.118.182.75) has joined #beagle
[17:39:36] <dm8tbr> ???
[17:40:20] * mmarker (~AndChat@202.sub-97-0-164.myvzw.com) has joined #beagle
[17:40:33] <_av500_> it was a fancy char here. but i guees android and irrsi and screen fraked it up
[17:40:47] <mmarker> /j #milestone-modding
[17:40:56] <mmarker> Dammit
[17:41:03] <_av500_> sledgehammer?
[17:41:25] <_av500_> or dremel?
[17:42:20] * jrmuizel (~jrmuizel@209.118.182.75) Quit (Quit: jrmuizel)
[17:42:46] <mru> thermic lance
[17:44:55] <_av500_> right. for the efuses...
[17:45:12] <_av500_> that'll fuse em
[17:50:55] <woglinde_> re
[17:56:41] * drakkan1000 (~drakkan@62.123.237.207) Quit (Remote host closed the connection)
[18:02:38] * b7500af1 (~GH@2001:468:c80:6104:21d:9ff:feb3:555b) Quit (Quit: Leaving)
[18:06:34] <dm8tbr> _av500_: the TM made it to be viewable here
[18:06:35] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
[18:08:12] <woglinde_> jo djlewis
[18:11:20] * signal11 (esteban@gnv.quaddro.net) Quit (Ping timeout: 276 seconds)
[18:11:44] * signal11 (esteban@gnv.quaddro.net) has joined #beagle
[18:13:37] <djlewis_> wazzup woglinde_
[18:14:04] <mru> friday is drawing near...
[18:14:11] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
[18:14:40] * Ceriand|work1 (~Ceriand@chemgroups.ucdavis.edu) Quit (Ping timeout: 252 seconds)
[18:15:03] <djlewis_> yep yep yep, uh huh, uh huh, yep yep yep
[18:15:24] * khasim (~a0393720@192.163.20.231) has joined #beagle
[18:15:58] <djlewis_> spoken in the spirit od a sesame street character whose name I dont recall.
[18:16:06] <djlewis_> s/od/of
[18:16:31] <emeb> I believe I remember those muppet sketches.
[18:16:38] <emeb> something with a telephone....
[18:17:02] * mru never watched them
[18:17:32] <djlewis_> his only other words were nope nope nope ununh ununh, nope nope nope . . .
[18:18:46] <emeb> http://www.youtube.com/watch?v=z_trSIBCgF0
[18:18:53] <isbric> could somone tell me whats going on with my beagleboard, i updated the ubuntu 10.04 kernel a week ago and i had some problem booting, then it just started to boot normally again with no reason
[18:19:18] <isbric> now im getting this again: Verifying Checksum ... Bad Data CRC
[18:19:24] <isbric> http://pastebin.com/34vgCLy9
[18:20:20] <woglinde_> hm you dont need dsp and sgx support
[18:20:56] <woglinde_> try a diffrent loadadress
[18:21:06] <woglinde_> 80008000 is maybee to low
[18:21:29] * nhg (~a0864305@nat/ti/x-jcsvjdyxetdcepxc) has joined #beagle
[18:21:40] <mmarker> Woglide: doesn't the error imply maybe a crap media the kernel image is on?
[18:21:57] <woglinde_> mmarker could ne too
[18:22:01] <mru> probably
[18:22:02] <woglinde_> ups be
[18:22:23] <mru> Legacy Image at 80000000, hmm...
[18:22:46] * woglinde_ personal wouldnt run stock ubuntu kernel on beagle
[18:22:47] <mru> that's going to clash with the unpacked kernel at 80008000
[18:23:08] * mru wouldn't run stock ubuntu, full stop
[18:24:21] * jrmuizel (~jrmuizel@nat/mozilla/x-nogwxnlynmujqnvo) has joined #beagle
[18:24:38] * stcguy (18646d55@gateway/web/freenode/ip.24.100.109.85) has joined #beagle
[18:25:11] <woglinde_> hm seems isbric needed only attention not a solution
[18:25:20] <isbric> im not sure im understanding the problem.
[18:25:40] <woglinde_> try to load the kernel at 80000000
[18:25:48] <isbric> how would i do that?
[18:25:54] <woglinde_> *sigh*
[18:25:56] <mru> woglinde_: he's doing that
[18:26:02] <mru> and that's the problem
[18:26:10] <woglinde_> hm?
[18:26:11] * stcguy (18646d55@gateway/web/freenode/ip.24.100.109.85) Quit (Client Quit)
[18:26:16] <woglinde_> he is loading at 80008000
[18:26:26] <mru> ## Booting kernel from Legacy Image at 80000000
[18:26:50] <mru> the uimage payload is then copied to 80008000
[18:27:00] <mru> where it overwrites the original
[18:27:06] <mru> causing the error
[18:27:18] <woglinde_> ah hm
[18:27:20] <woglinde_> sorry
[18:27:36] * jrmuizel (~jrmuizel@nat/mozilla/x-nogwxnlynmujqnvo) Quit (Client Quit)
[18:27:36] <woglinde_> 80008000 is where the kernel really starts
[18:27:36] <mru> the script needs to be changed to load the uimage to a high address
[18:27:41] <mru> like 80200000
[18:28:03] <woglinde_> yes
[18:28:37] <mru> actually, I'm not quite sure where the "Load Address" comes from
[18:28:42] <woglinde_> hm he is loading an initrd too
[18:28:42] * harsh (~harsh@122.172.28.144) Quit (Read error: Connection reset by peer)
[18:28:52] <woglinde_> maybee thats the problem too
[18:28:52] <mru> crazy
[18:29:03] <woglinde_> the initrd maybee overwrite the end of kernel
[18:29:14] <isbric> can i try to load the image to some other adress?
[18:29:23] <woglinde_> yes
[18:29:27] <woglinde_> fix the mmc-script
[18:29:40] <mmarker> But...randomly working again? Did anything knowingly change?
[18:31:34] <isbric> woglinde_: then id need to mount the mmc to some other box witch i dont have :/
[18:32:02] <woglinde_> hm yes
[18:32:08] <woglinde_> or a cardreader
[18:32:17] <woglinde_> cardreader is men best friend
[18:32:26] <mru> or type the commands manually for testing
[18:32:30] <djlewis_> emeb: gm, no that wasnt the character.
[18:32:59] <isbric> got a laptop with a cardreader but its running windows, when i loaded the image i had loads of hassle getting the cardreader working on a linux livecd.
[18:33:18] <mru> huh
[18:33:22] <isbric> mru: what command?
[18:33:36] * khasim (~a0393720@192.163.20.231) Quit (Remote host closed the connection)
[18:33:41] * kevinsc (~a0214685@nat/ti/x-rxdqovprcttlsvdb) has joined #beagle
[18:34:07] * khasim (~a0393720@192.163.20.231) has joined #beagle
[18:34:13] * nhg (~a0864305@nat/ti/x-jcsvjdyxetdcepxc) has left #beagle
[18:34:17] <isbric> i woudnt know what to look for if i downloaded the stuff from elinux wiki again.
[18:35:41] <woglinde_> here are some commands http://code.google.com/p/beagleboard/wiki/BeagleNANDFlashing
[18:35:56] <woglinde_> help on the u-boot console helps too
[18:36:08] <woglinde_> mmcinit
[18:36:23] <woglinde_> fatload mmc 0 0x80300000 uImage
[18:36:24] <mru> isn't that "mmc init" now?
[18:36:28] <woglinde_> yes
[18:36:47] <woglinde_> didnt find the proper site that fast
[18:36:57] <mru> uboot is a bit funny treating all numbers as hex too
[18:37:05] <mru> took me a few moments to realise
[18:44:30] <isbric> giving manual commands whas harder then i thought
[18:44:52] * harsh (~harsh@122.172.28.144) has joined #beagle
[18:45:14] <isbric> could i get nand to load the image to another adress?
[18:45:25] <mru> ignore nand
[18:46:22] * jrmuizel (~jrmuizel@nat/mozilla/x-belrrrfrpvcphngm) has joined #beagle
[18:46:46] <woglinde_> yeah sorry
[18:47:00] <woglinde_> I didnt metioned you dont need the nand commands
[18:47:06] <woglinde_> they are mostly for flashing
[18:47:12] <woglinde_> internal mem
[18:47:27] <isbric> yeah i figured but it got me thinking i might use it?
[18:48:53] <isbric> hm, well im thying the bootm 0x80300000 but i get the same result.
[18:49:19] <isbric> it even says the same old adresses: Load Address: 80008000
[18:49:33] <mru> of course it does
[18:49:48] <mru> that's how the image was built
[18:49:53] <mru> and is probably fine
[18:50:03] <ds2> try using a naked image instead ;)
[18:50:33] <isbric> so what does this manual testing tell us?
[18:51:09] * kevinsc1 (~a0214685@nat/ti/x-bkvvcmgxaibsflil) has joined #beagle
[18:52:21] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) Quit (Quit: leaving)
[18:53:43] * kevinsc (~a0214685@nat/ti/x-rxdqovprcttlsvdb) Quit (Ping timeout: 252 seconds)
[18:54:21] * harvy (4d64102e@gateway/web/freenode/ip.77.100.16.46) has joined #beagle
[18:54:45] <harvy> hi guys any word on uk beagleboard-xm shipping?
[18:55:46] * kerute (~kerute@kerunix.com) has joined #beagle
[19:01:58] * harvy (4d64102e@gateway/web/freenode/ip.77.100.16.46) Quit (Quit: Page closed)
[19:02:08] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
[19:06:14] * Sog (72180180@gateway/web/freenode/ip.114.24.1.128) has joined #beagle
[19:08:32] * Summeli (summeli@irc.summeli.fi) Quit (Ping timeout: 272 seconds)
[19:08:41] <Sog> I am building rowboat-eclair-dsp...
[19:12:09] <isbric> mru: so whats next? is the mmc card bad?
[19:13:08] <Sog> Just waiting the building steps :P
[19:13:36] <Sog> I use rowboat-eclair-dsp version.
[19:13:53] <Sog> I am waiting the ti-dsp folder build ok...
[19:15:08] * Summeli (summeli@irc.summeli.fi) has joined #beagle
[19:18:58] * rodrigo_golive (c8116f03@gateway/web/freenode/ip.200.17.111.3) Quit (Ping timeout: 252 seconds)
[19:20:12] * djlewis_ struggles with getting compuserve dialup working for a client :(
[19:24:09] <mru> dialup? that really is a 3rd-world country...
[19:26:14] <djlewis_> yep. :(
[19:26:37] <mmarker> Where the he'll is this? Texas?
[19:27:36] <djlewis_> a unique fellow with a old compaq celeron running winme ,, dbl argh!!
[19:28:50] <mmarker> oh wow! Call the Smithsonian.
[19:31:08] <ds2> compuserve?
[19:31:13] * |nfecteD (~xx@41.80-203-33.nextgentel.com) Quit (Read error: Connection reset by peer)
[19:32:01] <djlewis_> not so bad, its a 800 Mhz celeron
[19:32:50] <djlewis_> ds2: yes, we too looked at one another when we saw that. Seems when AOL shut down compuserve there was a sibling compuserve2000 company they moved existing clients to.
[19:33:03] <ds2> wow
[19:33:25] <ds2> 800Mhz isn't that old... wasn't the original eeePC a 800MHz celery?
[19:33:56] <djlewis_> isnt this the BB competetor ;)
[19:35:23] * |nfecteD (~xx@41.80-203-33.nextgentel.com) has joined #beagle
[19:36:02] <ds2> he he he
[19:36:21] <isbric> sorry if im slow but what shuld i do about my problem?
[19:36:28] * GNUtoo|laptop (~gnutoo@host55-144-dynamic.54-79-r.retail.telecomitalia.it) has joined #beagle
[19:36:37] <ds2> it is certainly a superior machine... what beagle board can keep you warm in the upcoming cold dark winter? :D
[19:37:14] <GNUtoo|laptop> hi,is there a howto to get xrandr -o 1 work or something that achieve the same goal(like echo 1 > /sys/class/graphics/fb2/rotate)
[19:39:32] <djlewis_> isbric: did you try last suggestion?
[19:40:12] * PBansal (~pbansal@nat/ti/x-woniohiqwutorpfz) Quit (Ping timeout: 272 seconds)
[19:41:16] <isbric> yeah i tryed doing : mmc init, fatload mmc1 0 0x80300000 uImage, bootm 0x80300000
[19:41:24] * alancam (~a-campbel@nat/ti/x-yxilfhmyoeanywun) Quit (Ping timeout: 252 seconds)
[19:42:25] <djlewis_> isbric: iirc the last suggestions were to try another boot image
[19:42:58] <isbric> how would i do that without a propper way to load a new image to the mmc?
[19:43:07] <Sog> Hi, all I got home/sog/rowboat-android-eclair/external/ti-dsp/dvsdk_3_01_00_10/codec_engine_2_25_05_16/cetools/packages/ti/sdo/linuxutils/cmem: No such file or directory. Stop.
[19:43:58] <Sog> cmem
[19:46:30] <djlewis_> isbric: most of us have a card reader and a pc.
[19:47:06] <mru> the rest have butterflies
[19:47:39] <djlewis_> oooh, butterflies.... lovely butterflies...
[19:48:03] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) Quit (Ping timeout: 245 seconds)
[19:48:05] <isbric> hmm, guess ill loos everything on the scard anyway.
[19:48:24] <djlewis_> and spare SD cards
[19:50:42] <foobaz_> What do you guys use in angstrom for rendering on the beagleboard? OpenGL ES? Is that the preferred way?
[19:51:59] * Sog (72180180@gateway/web/freenode/ip.114.24.1.128) Quit (Quit: Page closed)
[19:53:22] <prpplague> foobaz_: i use this - http://www.slashfood.com/2006/01/13/how-to-render-lard/
[19:53:30] * lag (~lag@cpc2-aztw21-0-0-cust264.aztw.cable.virginmedia.com) has joined #beagle
[19:56:05] <foobaz_> heh
[19:56:50] <Crofton> koen, you bumped the perl version?
[19:56:58] * awozniak_ (~awozniak@adsl-76-205-222-173.dsl.snlo01.sbcglobal.net) has joined #beagle
[19:56:59] * awozniak__ (~awozniak@adsl-76-205-222-173.dsl.snlo01.sbcglobal.net) has joined #beagle
[19:59:53] * awozniak_ (~awozniak@adsl-76-205-222-173.dsl.snlo01.sbcglobal.net) Quit (Client Quit)
[19:59:55] * awozniak__ (~awozniak@adsl-76-205-222-173.dsl.snlo01.sbcglobal.net) Quit (Client Quit)
[20:14:55] <isbric> hmm, seams i can mount the sd card, could i edit the boot.scr to load stuff elseware?
[20:15:02] * amitk (~amit@a91-154-124-12.elisa-laajakaista.fi) Quit (Quit: leaving)
[20:23:31] * mmarker (~AndChat@202.sub-97-0-164.myvzw.com) Quit (Quit: Bye)
[20:30:12] * woglinde_ (~heinold@f052235224.adsl.alicedsl.de) Quit (Ping timeout: 265 seconds)
[20:31:55] * woglinde (~heinold@f052239245.adsl.alicedsl.de) has joined #beagle
[20:41:13] * hlide (~chaton@vig91-4-82-247-134-92.fbx.proxad.net) has joined #beagle
[20:45:36] * cwillu_at_work (~cwillu@cwillu.com) Quit (Remote host closed the connection)
[20:52:37] * cwillu_at_work (~cwillu@cwillu.com) has joined #beagle
[20:57:30] * GNUtoo|laptop (~gnutoo@host55-144-dynamic.54-79-r.retail.telecomitalia.it) Quit (Ping timeout: 265 seconds)
[20:57:59] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) Quit (Quit: Lost terminal)
[20:59:46] * pH5_ (~ph5@e178209002.adsl.alicedsl.de) Quit (Quit: bye)
[21:01:29] * GNUtoo|laptop (~gnutoo@host55-144-dynamic.54-79-r.retail.telecomitalia.it) has joined #beagle
[21:03:31] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Ping timeout: 252 seconds)
[21:05:11] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
[21:05:57] * preben_ (~prebenno@login1.uio.no) Quit (Ping timeout: 246 seconds)
[21:09:47] * woglinde (~heinold@f052239245.adsl.alicedsl.de) Quit (Quit: zaoo)
[21:15:07] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) has joined #beagle
[21:17:10] * rbarraud_ (~rbarraud@118-92-27-88.dsl.dyn.ihug.co.nz) has joined #beagle
[21:19:18] * rcranetx (~rcranetx@nat/ti/x-encsxnqhhljcrplm) Quit (Quit: Leaving.)
[21:19:18] * harsh (~harsh@122.172.28.144) Quit (Read error: Connection reset by peer)
[21:19:40] * harsh (~harsh@122.172.28.144) has joined #beagle
[21:25:47] * cwillu_at_work (~cwillu@cwillu.com) Quit (Remote host closed the connection)
[21:26:08] * lifeeth (~praneeth@unaffiliated/lifeeth) Quit (Quit: Up and at 'em, Atom Ant!)
[21:31:36] * cwillu_at_work (~cwillu@cwillu.com) has joined #beagle
[21:33:43] * alancam (~a-campbel@nat/ti/x-pmbjdpxelsroeieq) has joined #beagle
[21:34:37] * GNUtoo|laptop (~gnutoo@host55-144-dynamic.54-79-r.retail.telecomitalia.it) Quit (Quit: Program received signal SIGSEGV, Segmentation fault.)
[21:35:26] * spin76 (8e1f403d@gateway/web/freenode/ip.142.31.64.61) has joined #beagle
[21:35:44] <spin76> Hello beagleboard abusers.
[21:36:12] <djlewis_> hmmm
[21:36:52] * jrmuizel (~jrmuizel@nat/mozilla/x-belrrrfrpvcphngm) Quit (Quit: jrmuizel)
[21:37:04] * PBansal (~pbansal@nat/ti/x-znnhenrkspccsalc) has joined #beagle
[21:37:25] <spin76> Just out of curiosity, what are you guys using for a terminal emulator on a windows 7 machine?
[21:37:46] <djlewis_> not too many folk here use windoze
[21:38:04] <mru> at least not once we're finished with them
[21:39:48] <djlewis_> I like to open mine when the temps are nice :)
[21:41:53] * PierreLuc (~PierreLuc@ip-66-254-44-78.mqdsl.megaquebec.net) Quit (Quit: Bye)
[21:42:38] * lifeeth (~praneeth@202.3.77.232) has joined #beagle
[21:42:38] * lifeeth (~praneeth@202.3.77.232) Quit (Changing host)
[21:42:38] * lifeeth (~praneeth@unaffiliated/lifeeth) has joined #beagle
[21:42:52] <dm8tbr> djlewis_: I live in Finland, you rarely want to open windows here. Go figure that Linus is from here ;)
[21:42:53] <spin76> djlewis_: what if I were to run a terminal emulator through cygwin/
[21:43:41] <spin76> unfortunately, i'm on a windows machine w/o a linux distro installed. i figured that the tools would be there ...
[21:44:48] * jrmuizel (~jrmuizel@nat/mozilla/x-sniuryqxnnnyavzm) has joined #beagle
[21:50:34] * 16SAAFMYP (~krishna@nat/ti/x-qduwnukgdvbfzzbj) has joined #beagle
[21:50:56] <dm8tbr> spin76: putty could work
[21:52:29] * PBansal (~pbansal@nat/ti/x-znnhenrkspccsalc) Quit (Ping timeout: 276 seconds)
[21:54:23] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Quit: Verlassend)
[21:55:38] * GrouchoMarx (~gmarx@rrcs-67-53-159-201.west.biz.rr.com) Quit (Quit: [BX] Were you born a fat, slimy, scumbag, puke, piece of shit or did you have to work on it?)
[21:58:18] <koen> Crofton: yes, that has some fallout that needs fixing, but that's what's -next is for :)
[21:59:26] <Crofton> does next support 2010?
[21:59:40] * ghoti_ is now known as ghoti
[21:59:50] <koen> -next is 2010
[22:00:06] <Crofton> where is that hostsed?
[22:00:09] * koen had one cosmo too many tonight
[22:00:14] <Crofton> heh
[22:01:05] <spin76> i'm having difficulty getting a return signal from the beagleboard (connected by serial). anyone willing to help?
[22:01:10] <koen> hosted as in git tree?
[22:01:16] <Crofton> yeah
[22:02:02] * torez (~torez@32.97.110.58) Quit (Read error: Connection reset by peer)
[22:03:02] <djlewis_> spin76: which board? the BBSRM's have a excellent explanation and diagnosis steps
[22:05:21] <spin76> I've got the C4 rev
[22:05:38] <koen> Crofton: you can use 2010 in .dev if you don't need to upload packages
[22:05:55] <koen> Crofton: -next-rebase only has one patch for feed paths
[22:06:04] <Crofton> ok
[22:06:05] * harsh (~harsh@122.172.28.144) Quit (Read error: Connection reset by peer)
[22:06:13] <Crofton> will you be around in the am?
[22:06:15] <Crofton> my am
[22:06:26] * harsh (~harsh@122.172.28.144) has joined #beagle
[22:06:34] <spin76> I've been following the beginner's wiki. I'm on step 1: initiating contact. On my serial device, there are Rx and Tx lights. When I send commands to the board, the Tx command turns on, but no Rx, therefore, nothing happens.
[22:06:35] <koen> I'll be awake in ~8 hours
[22:06:40] <Crofton> ok
[22:06:56] <Crofton> I am having some stupid issues I will look at in my am
[22:07:17] <Crofton> gn
[22:07:26] <koen> I think we need to bump DISTRO_PR for 2010
[22:07:36] <djlewis_> spin76: i'm kinda tied up but you can go to beagleboard.org and look at both the BBSRM and beagleboardbeginners links. on the last one have a look at serial under contents.
[22:08:06] <Crofton> I was doing a clean build
[22:08:08] <djlewis_> 3. serial connection http://elinux.org/BeagleBoardBeginners
[22:08:24] * torez (~torez@32.97.110.58) has joined #beagle
[22:08:55] <spin76> duly noted. i just might be back later then.
[22:09:54] <djlewis_> ok
[22:12:45] * mmarker (~crichton@2001:470:8:77e:211:9ff:fedc:61e4) has joined #beagle
[22:21:42] * rlameiro (~lameiro@87-196-198-184.net.novis.pt) has joined #beagle
[22:24:02] * jayabharath (~jayabhara@nat/ti/x-lbufdkxbnogrgszs) Quit (Ping timeout: 264 seconds)
[22:24:23] * BThompson (~a0193480@nat/ti/x-tjyablnopedfzioa) Quit (Remote host closed the connection)
[22:24:28] * espindola (~espindola@CPE001a704e2b6d-CM001225dd5348.cpe.net.cable.rogers.com) has joined #beagle
[22:26:28] <mmarker> Finally, got a MAC address based on the die id for the xM onboard ethernet.
[22:27:23] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Ping timeout: 255 seconds)
[22:32:02] <djlewis_> mmarker: makes progress :)
[22:33:05] * hlide (~chaton@vig91-4-82-247-134-92.fbx.proxad.net) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.9/20100824153629])
[22:33:46] <mmarker> And it's posted to the beagleboard ML
[22:33:55] <mmarker> But it WORKSFORME
[22:33:55] <harsh> hmm
[22:34:05] <mmarker> now a constant MAC addy, so IPv6 is happy
[22:34:24] <mmarker> and I somehow destroyed my GIT tree with a rebase.
[22:34:32] <mmarker> time to rebuild it :\
[22:37:20] * spin76 (8e1f403d@gateway/web/freenode/ip.142.31.64.61) Quit (Ping timeout: 252 seconds)
[22:37:39] * mmarker (~crichton@2001:470:8:77e:211:9ff:fedc:61e4) Quit (Quit: Leaving)
[22:42:18] * prpplague (~danders@nat/ti/x-oqzaoempfiuionrs) Quit (Quit: Leaving)
[22:44:09] * prpplague (~danders@nat/ti/x-tddhclpueawmisnd) has joined #beagle
[22:55:20] * rbarraud_ (~rbarraud@118-92-27-88.dsl.dyn.ihug.co.nz) Quit (Ping timeout: 276 seconds)
[22:57:19] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Quit: Leaving.)
[22:57:50] * killring (~killring@76.226.192.190) Quit (Quit: killring)
[22:59:47] * hansdampf1 (~moritz@p549257A2.dip.t-dialin.net) has joined #beagle
[22:59:47] * katie (~katierh@nat/ti/x-nnqmulkvyiudvlvn) Quit (Ping timeout: 265 seconds)
[23:01:14] * brijesh (~brijesh@nat/ti/x-bbxkmuaytceuecoz) Quit (Quit: Leaving)
[23:16:10] * espindola (~espindola@CPE001a704e2b6d-CM001225dd5348.cpe.net.cable.rogers.com) Quit (Quit: Ex-Chat)
[23:22:03] * rbarraud_ (~rbarraud@202-180-88-252.callplus.net.nz) has joined #beagle
[23:26:15] * kanru (~kanru@118-160-162-37.dynamic.hinet.net) has joined #beagle
[23:28:16] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) has joined #beagle
[23:31:23] * GrizzlyAdams (~Grizzly@ip98-184-88-41.mc.at.cox.net) has joined #beagle
[23:37:31] * PBansal (~pbansal@nat/ti/x-eqktieqozbskrjbt) has joined #beagle
[23:38:45] * XorA is now known as XorA|gone
[23:40:51] * rbarraud_ is now known as rbarraud
[23:47:12] * djlewis (~djlewis@75.15.67.41) has joined #beagle
[23:53:00] * Zoxc (~zoxc@ti0128a380-dhcp0073.bb.online.no) Quit ()