• [00:02:00] * 18VAASV9V (~mrodrigue@186.32.57.22) Quit (Quit: Leaving.)
  • [00:02:15] * gdm (~gdm@190.55.34.222) Quit (Remote host closed the connection)
  • [00:02:55] * gdm (~gdm@190.55.34.222) has joined #beagle
  • [00:09:05] * _chase_ (~chase@nat/ti/x-jmseskkvuhqkwvwg) Quit (*.net *.split)
  • [00:09:05] * simon42 (~simon@89.238.65.10) Quit (*.net *.split)
  • [00:09:05] * HokieTux (~bhilburn@wireless-5192.wireless.ece.vt.edu) Quit (*.net *.split)
  • [00:09:05] * buZz_ (~buzz@bydogen.stoned-it.com) Quit (*.net *.split)
  • [00:11:10] <beginner> hi, I am trying to connect ethernet over USB-OTG for beagleboard using the instructions given in http://thoughtshubham.blogspot.com/2010/01/ethernet-over-usb-otg-for-beagleboard.html . I am getting Device or resource busy error
  • [00:11:34] <beginner> when I issue insmod g-ether.ko
  • [00:11:50] * buZz (~buzz@bydogen.stoned-it.com) has joined #beagle
  • [00:12:10] * simon42 (~simon@89.238.65.10) has joined #beagle
  • [00:12:44] * _chase_ (~chase@nat/ti/x-pwadmkergtgimmuw) has joined #beagle
  • [00:13:01] * katier (~katierh@nat/ti/x-mjcyibusitlmowcm) Quit ()
  • [00:13:05] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) Quit (Ping timeout: 276 seconds)
  • [00:18:19] * HokieTux (~bhilburn@wireless-5192.wireless.ece.vt.edu) has joined #beagle
  • [00:18:39] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [00:23:33] * djlewis (~djlewis@75.15.65.205) has joined #beagle
  • [00:25:06] * ppotera__ (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [00:25:43] * rsalveti (~rsalveti@187.113.106.240) has joined #beagle
  • [00:26:56] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Ping timeout: 265 seconds)
  • [00:26:56] * ppotera__ is now known as ppotera
  • [00:28:53] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) has joined #beagle
  • [00:29:38] * robtow (~rob@12.156.66.34) has joined #beagle
  • [00:29:46] * gdm (~gdm@190.55.34.222) Quit (Ping timeout: 264 seconds)
  • [00:34:07] * robtow (~rob@12.156.66.34) Quit (Remote host closed the connection)
  • [00:37:45] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [00:46:16] * raster (~raster@enlightenment/developer/raster) has joined #beagle
  • [00:47:11] * rsalveti (~rsalveti@187.113.106.240) Quit (Ping timeout: 245 seconds)
  • [00:47:28] * rsalveti (~rsalveti@189.115.172.36) has joined #beagle
  • [00:48:39] * gdm (~gdm@190.55.34.222) has joined #beagle
  • [00:52:18] * robtow (~rob@12.156.66.34) has joined #beagle
  • [00:53:20] * emeb (~ericb@ip72-223-81-194.ph.ph.cox.net) Quit (Quit: Leaving.)
  • [00:57:38] * dl9pf (~quassel@opensuse/member/dl9pf) has joined #beagle
  • [00:57:49] <dl9pf> hi!
  • [00:58:07] <dl9pf> how can i disable omap_wdt or at least make it happy ?
  • [00:59:48] <dl9pf> [ 25.342041] Freeing init memory: 184K
  • [00:59:48] <dl9pf> [ 29.209350] omap_wdt: Unexpected close, not stopping!
  • [00:59:57] * katier (~katierh@nat/ti/x-qdvjhhbafdoutjwg) has joined #beagle
  • [01:05:06] * robtow (~rob@12.156.66.34) Quit (Ping timeout: 245 seconds)
  • [01:05:50] * r1nu- (~binShellc@unaffiliated/r1nu-) has joined #beagle
  • [01:06:28] * prpplague (~dave123_a@ppp-70-249-147-9.dsl.rcsntx.swbell.net) has joined #beagle
  • [01:07:02] * emeb|mac (~ericb@ip72-223-81-194.ph.ph.cox.net) has joined #beagle
  • [01:08:16] * william_zhang (~william@58.247.126.174) has joined #beagle
  • [01:13:07] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [01:14:05] * khasim (~a0393720@192.163.20.231) has joined #beagle
  • [01:15:11] * katier (~katierh@nat/ti/x-qdvjhhbafdoutjwg) Quit ()
  • [01:16:24] * theholyduck (~holyduck@ip-70-139-106-77.eidsiva.net) Quit (Read error: Connection reset by peer)
  • [01:23:54] * gdm (~gdm@190.55.34.222) Quit (Remote host closed the connection)
  • [01:24:34] * gdm (~gdm@190.55.34.222) has joined #beagle
  • [01:27:46] * khasim (~a0393720@192.163.20.231) Quit (Ping timeout: 246 seconds)
  • [01:31:28] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [01:33:03] <william_zhang> hi all, are there .bb files for video format convert in the recipes directory?
  • [01:33:54] * guybrush (~billybeaw@ppp-58-8-33-177.revip2.asianet.co.th) has joined #beagle
  • [01:36:06] * zeroresidue (~sawdis@modemcable203.209-56-74.mc.videotron.ca) Quit (Quit: Leaving.)
  • [01:39:43] * notzed (~notzed@ppp121-45-21-119.lns20.adl2.internode.on.net) has joined #beagle
  • [01:45:25] * NishanthMenon (~nmenon@nat/ti/x-uvtpzwbntxygnncj) Quit (Quit: Ex-Chat)
  • [01:46:38] * JDuke128 (JDuke128@81.6.95.198) Quit (Ping timeout: 252 seconds)
  • [01:50:59] * JDuke128 (~kadir@81.214.22.138) has joined #beagle
  • [02:16:08] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Remote host closed the connection)
  • [02:16:14] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [02:16:30] * PL (~4c4159b1@gateway/web/freenode/x-gkhtpiwloejzgcvt) has joined #beagle
  • [02:16:37] <PL> hello world
  • [02:16:58] * PL is now known as Guest63069
  • [02:17:28] <Guest63069> hello world
  • [02:18:13] <Guest63069> where can I get uboot source code for Beagle/DevKit8000?
  • [02:20:07] <prpplague> source code is everywhere
  • [02:20:24] <prpplague> Guest63069 start by visiting: http://www.elinux.org/BeagleBoard
  • [02:20:25] <Guest63069> lol, thats the problem,
  • [02:21:49] <Guest63069> ok, git I have that
  • [02:22:16] <prpplague> ever piece of basic source is referenced off that page
  • [02:30:15] * theholyduck (~holyduck@ip-199-138-106-77.eidsiva.net) has joined #beagle
  • [02:39:20] * wroberts1 (~klogd@qbang.org) Quit (Ping timeout: 276 seconds)
  • [02:40:49] * wroberts1 (~klogd@qbang.org) has joined #beagle
  • [02:45:45] * GeneralAntilles (~ryan@Maemo/community/council/GeneralAntilles) Quit (Quit: Leaving.)
  • [02:46:59] * wroberts1 (~klogd@qbang.org) Quit (Ping timeout: 260 seconds)
  • [02:48:53] * wroberts1 (~klogd@qbang.org) has joined #beagle
  • [03:01:13] * cody (~cody@dslb-084-056-126-172.pools.arcor-ip.net) has joined #beagle
  • [03:01:26] * wroberts1 (~klogd@qbang.org) Quit (Ping timeout: 252 seconds)
  • [03:02:02] * wroberts1 (~klogd@qbang.org) has joined #beagle
  • [03:04:30] * cody_ (~cody@dslb-084-056-086-162.pools.arcor-ip.net) Quit (Ping timeout: 265 seconds)
  • [03:13:20] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) has joined #beagle
  • [03:14:50] <DaQatz> ?
  • [03:21:59] * duffolonious (~bryan@75-168-96-194.mpls.qwest.net) Quit (Ping timeout: 260 seconds)
  • [03:24:05] * duffolonious (~bryan@75-168-96-194.mpls.qwest.net) has joined #beagle
  • [03:29:39] * GeneralAntilles (~ryan@Maemo/community/council/GeneralAntilles) has joined #beagle
  • [03:33:14] * cody (~cody@dslb-084-056-126-172.pools.arcor-ip.net) Quit (Ping timeout: 240 seconds)
  • [03:33:33] * cody (~cody@dslb-084-056-126-172.pools.arcor-ip.net) has joined #beagle
  • [03:40:46] * GeneralAntilles (~ryan@Maemo/community/council/GeneralAntilles) Quit (Quit: Leaving.)
  • [03:43:37] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) Quit (Quit: Running with ???. And throwing ?????? at stuff. I ??? Unicode!)
  • [03:48:47] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) Quit (Ping timeout: 246 seconds)
  • [03:50:55] * djlewis (~djlewis@75.15.65.205) Quit (Ping timeout: 246 seconds)
  • [03:54:23] * aholler_ (~aholler@p57B226C4.dip0.t-ipconnect.de) has joined #beagle
  • [03:58:21] * aholler (~aholler@p57B2257D.dip0.t-ipconnect.de) Quit (Ping timeout: 276 seconds)
  • [04:15:33] * tealbird (~poisonivy@70-36-184-147.dsl.static.sonic.net) has joined #beagle
  • [04:16:18] * peksha (~peksha@145.86.broadband10.iol.cz) has joined #beagle
  • [04:17:15] * matthsu (~matt@61-30-10-70.static.tfn.net.tw) Quit (Quit: Lost terminal)
  • [04:19:26] * katie_ (~katierh@nat/ti/x-kmimekqqrysnekoh) has joined #beagle
  • [04:20:21] * hvaibhav (~a0393758@192.163.20.231) has joined #beagle
  • [04:33:30] * ksinkar (~ksinkar@61.17.165.41) has joined #beagle
  • [04:38:42] * tealbird (~poisonivy@70-36-184-147.dsl.static.sonic.net) has left #beagle
  • [04:40:17] * GeneralAntilles (~ryan@Maemo/community/council/GeneralAntilles) has joined #beagle
  • [04:41:49] * tomatoes7 (~fatboy-ub@76.197.13.149) has joined #beagle
  • [04:43:11] * AlTheKiller (~althekill@xbmc/staff/AlTheKiller) Quit (Ping timeout: 260 seconds)
  • [04:47:22] <shashin> for TV-out and NTSC, is it possible to remove the overscan? (I have a myvu crystal taht takes NTSC in, however, the 720x480 makes the display go a little wonky)
  • [04:48:25] * mobidev (~mobidev@94.127.205.30) has joined #beagle
  • [04:54:14] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Ping timeout: 246 seconds)
  • [04:57:14] <_av500_> ntsc is ntsc, nothing to remove
  • [04:57:31] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) has joined #beagle
  • [04:57:56] <_av500_> well, of course, remove it all
  • [04:58:33] <shashin> yeah... i'm starting to investigate if i have to mess around with timings :[
  • [04:59:31] <_av500_> the timings are standard
  • [04:59:35] <_av500_> or should be
  • [04:59:45] <DanaG> !find trousers/tss.h
  • [04:59:47] <DanaG> er
  • [04:59:50] <DanaG> sorry, wrong tab.
  • [04:59:58] <shashin> hahaha =)
  • [05:00:18] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [05:00:20] * _av500_ just found his trousers without a script
  • [05:00:26] <shashin> yeah, so while the ntsc out works fine on my monitor, on the myvu crystals it actually tries to show the entir image, including the overscan
  • [05:00:45] <_av500_> shashin: sure
  • [05:01:17] <shashin> so while the display on the myvu is 640x480, it's trying to show the 720x480 creating some jitter
  • [05:01:32] <_av500_> blame the mzvu
  • [05:01:38] <_av500_> myvu
  • [05:02:26] <shashin> yep, i do. i can't fix it though so i'm looking for a workaround. heh =)
  • [05:03:12] <_av500_> did you try it with another ntsc source?
  • [05:03:50] <shashin> it works somewhat fine from another device, which is weird
  • [05:04:20] <_av500_> hmm
  • [05:05:16] <_av500_> did u try PAL?
  • [05:05:23] <shashin> i've looked at the internals of the myvu and ther's nothing there for me to adjust so i'm trying to find a way to tweak the bb... probably it's out of spec but i'd appreciate any hints.
  • [05:05:36] <ds2> Hmmm
  • [05:05:39] <shashin> pal causes the same.
  • [05:05:53] <_av500_> hmm
  • [05:06:44] <ds2> tried SECAM?
  • [05:07:03] <ds2> or maybe NTSC-J?
  • [05:07:26] <shashin> neither! can i just do a omapfb.mode=ntsc-j ?
  • [05:07:46] * ds2 whistles innocently
  • [05:07:54] * shashin hunts through source
  • [05:14:43] * Barts__ (~Barts@c-76-108-137-30.hsd1.fl.comcast.net) Quit (Quit: Leaving)
  • [05:16:15] <shashin> no luck on any of them sadly. still shows the entire area. i'll keep hunting though, i didn't realise there was more than ntsc/pal :D
  • [05:19:33] * RazZziel (~raziel@63.93.117.91.dynamic.mundo-r.com) has joined #beagle
  • [05:22:02] * BThompsonGR (~bernie@cpe-76-184-159-129.tx.res.rr.com) Quit (Read error: Connection reset by peer)
  • [05:22:38] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) Quit (Quit: Running with ???. And throwing ?????? at stuff. I ??? Unicode!)
  • [05:28:18] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Quit: jrmuizel)
  • [05:32:16] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) has joined #beagle
  • [05:36:48] * soman (~somnath@stargate.starnet.fi) has joined #beagle
  • [05:47:57] * Nilly (~75f11110@gateway/web/freenode/x-ijqayjrplqscakld) has joined #beagle
  • [05:52:32] * khasim (~a0393720@192.163.20.231) has joined #beagle
  • [05:55:18] <Nilly> does u-boot pass anything that is verified during kernel something call device id?
  • [05:55:30] <Nilly> if it doesnt match kernel wont boot?
  • [06:06:12] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [06:10:23] <tomatoes7> how come there's no one talking in #gumstix?
  • [06:10:39] <tomatoes7> its dead in there always
  • [06:14:52] <_av500_> yes there is board id
  • [06:15:00] <Animule> maybe... maybe it's because...
  • [06:15:03] <Animule> ....this channel...
  • [06:15:05] <Animule> ...uhm...
  • [06:15:19] <Animule> Look! A rhinocerous with seven pounds of butter in its small intestine!
  • [06:15:29] * Animule runs away
  • [06:15:59] <_av500_> tomatoes7: i can troll you in gumstix as well if you like :)
  • [06:16:49] <Nilly> so i cant use the uimage of one omap3530 board(beagle) to other omap3530(dev3530)?
  • [06:17:21] <_av500_> yes u caN
  • [06:18:08] <_av500_> assuming the kernel knows both boards
  • [06:18:56] <dm8tbr> MACH_ARCHOS :>
  • [06:19:05] * radhermit (~radhermit@radhermit-1-pt.tunnel.tserv3.fmt2.ipv6.he.net) Quit (Quit: WeeChat 0.3.2)
  • [06:19:19] <Nilly> its omap3530 board than it should work probebly some of the peripherals driver wont get loaded and that will not work right?
  • [06:19:34] * radhermit (~radhermit@radhermit-1-pt.tunnel.tserv3.fmt2.ipv6.he.net) has joined #beagle
  • [06:21:31] * RazZziel (~raziel@63.93.117.91.dynamic.mundo-r.com) Quit (Ping timeout: 248 seconds)
  • [06:23:26] * Yuvi (~yuvi@d-69-161-90-167.cpe.metrocast.net) Quit (Ping timeout: 245 seconds)
  • [06:25:12] * Belna (~Thomas@DSL01.212.114.252.242.ip-pool.NEFkom.net) has joined #beagle
  • [06:30:01] * theholyduck (~holyduck@ip-199-138-106-77.eidsiva.net) Quit (Ping timeout: 258 seconds)
  • [06:31:35] * neo01123 (~neo@122.163.113.133) Quit (Remote host closed the connection)
  • [06:32:44] * notzed (~notzed@ppp121-45-21-119.lns20.adl2.internode.on.net) Quit (Ping timeout: 240 seconds)
  • [06:33:08] * GrizzlyAdams (~Grizzly@ip98-184-88-41.mc.at.cox.net) Quit (Quit: Leaving.)
  • [06:33:25] * XorA|gone is now known as XorA
  • [06:34:21] * btr_26 (~5b08a86a@gateway/web/freenode/x-iwjtnubimwbidihu) has joined #beagle
  • [06:38:13] * guybrush (~billybeaw@ppp-58-8-33-177.revip2.asianet.co.th) Quit (Quit: My damn controlling terminal disappeared!)
  • [06:38:29] * jack_lee (~75f11110@gateway/web/freenode/x-zxnhmccqjyreilsb) has joined #beagle
  • [06:39:36] * franktango (~a0746747@nat/ti/x-jsicysnoznntlmuj) has joined #beagle
  • [06:40:36] * emeb|mac (~ericb@ip72-223-81-194.ph.ph.cox.net) Quit (Ping timeout: 276 seconds)
  • [06:42:47] * Yuvi (~yuvi@d-69-161-90-167.cpe.metrocast.net) has joined #beagle
  • [06:43:05] * tsjsieb (~tsjsieb@dejongbeheer.nl) has joined #beagle
  • [06:44:37] * RazZziel (~raziel@udc-cesga.udc.es) has joined #beagle
  • [06:48:19] * GeneralAntilles (~ryan@Maemo/community/council/GeneralAntilles) has left #beagle
  • [06:53:06] <tomatoes7> _av500_, i'm just wondering why its quiet in there all the time
  • [06:58:54] * Guest63069 (~4c4159b1@gateway/web/freenode/x-gkhtpiwloejzgcvt) Quit (Ping timeout: 252 seconds)
  • [07:03:01] * ksinkar (~ksinkar@61.17.165.41) Quit (Remote host closed the connection)
  • [07:06:14] <saschi> hi
  • [07:06:14] * midnight1111 (~80aae00b@gateway/web/freenode/x-fputicvmngmuwkqh) Quit (Ping timeout: 252 seconds)
  • [07:07:31] <saschi> the beagleboard xm comes with die Image Sensor Port Pins of the OMAP connected to a header, right?
  • [07:12:02] <av500> tomatoes7: maybe they are all ahy
  • [07:12:04] <av500> shy
  • [07:14:32] <hrw> morning
  • [07:15:28] * Beagle6 (~Beagle6@ex1.amadoc.jp) has joined #beagle
  • [07:17:24] <Beagle6> can anyone tell me about SGX: cannot create EGL surface, error= 0x300b
  • [07:20:38] <koen> Beagle6: check your /etc/powervr.ini
  • [07:21:14] * nlCortana (~myemail@ip45-216-212-87.adsl2.static.versatel.nl) has joined #beagle
  • [07:21:33] <Beagle6> thanks..it happens to be libpvrQWSQSEGL.so, this error only happens when i try to use QT with opengl
  • [07:22:01] <koen> and is that file present in /usr/lib?
  • [07:22:15] <koen> ls /usr/lib | grep libpvrQWSQSEGL
  • [07:22:31] <Beagle6> it's in LD_LIBRARY_PATH, not enough?
  • [07:22:40] <koen> I think you'll see only the .so.1 is there, so add the .1 to pwervr.ini
  • [07:23:55] * nlCortana (~myemail@ip45-216-212-87.adsl2.static.versatel.nl) has left #beagle
  • [07:23:59] * nlCortana (~myemail@ip45-216-212-87.adsl2.static.versatel.nl) has joined #beagle
  • [07:24:22] * Belna (~Thomas@DSL01.212.114.252.242.ip-pool.NEFkom.net) Quit (Remote host closed the connection)
  • [07:28:19] <Beagle6> koen: i copied libpvrQWSQSEGL.so.1.0.0, but problem persists..the demos work fine though
  • [07:29:42] * jack_lee (~75f11110@gateway/web/freenode/x-zxnhmccqjyreilsb) Quit (Ping timeout: 252 seconds)
  • [07:30:33] * Try`0xff is now known as Tryum
  • [07:30:48] * franktango (~a0746747@nat/ti/x-jsicysnoznntlmuj) has left #beagle
  • [07:30:54] <Beagle6> anyone managed to run qt-4.6.2 with powervr support?
  • [07:37:13] <koen> Beagle6: how does your powervr.ini look *exactly*?
  • [07:37:46] <koen> if should have something like WindowSystem=libpvrQWSQSEGL.so.1.0.0
  • [07:37:53] <koen> it needs the *exact* filename
  • [07:40:29] <Beagle6> k, it looks like: line1: [default] line2: WindowSystem=libpvrQWSWSEGL.so.1.0.0
  • [07:41:16] <Beagle6> typo on the lib name, one i wrote is exact
  • [07:42:14] <koen> and your qt app doesn't start?
  • [07:43:20] <Beagle6> it starts, just that the widget where OpenGL's supposed to be doesnt render
  • [07:44:18] <koen> hellogl_es2 -qws -display powervr ?
  • [07:44:28] <Beagle6> yes, doesnt work..
  • [07:44:48] <koen> hmmm, that does work over here
  • [07:44:56] <Beagle6> what distribution do u use
  • [07:45:04] <Beagle6> and the qt version
  • [07:46:34] * Nilly (~75f11110@gateway/web/freenode/x-ijqayjrplqscakld) Quit (Ping timeout: 252 seconds)
  • [07:53:32] * Nilly (~75f11136@gateway/web/freenode/x-wrzubyrimrjyrkgh) has joined #beagle
  • [07:55:48] * Amit_Karpe (~7beef129@gateway/web/freenode/x-hwwdifekqgoraajs) has joined #beagle
  • [07:56:25] * jack_lee (~75f11136@gateway/web/freenode/x-ztpdwdsrqkhuvqna) has joined #beagle
  • [07:57:49] * florian_kc (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [07:58:20] * florian_kc is now known as florian
  • [07:59:07] * gdm (~gdm@190.55.34.222) Quit (Ping timeout: 248 seconds)
  • [08:01:30] * _roger_ (~a0740758@nat/ti/x-mhewhrqvkgaqooyk) has joined #beagle
  • [08:01:38] * notaz (~notaz@213-190-49-43.static.zebra.lt) Quit (Ping timeout: 258 seconds)
  • [08:02:23] * Psychiatras (~psy@213-190-49-43.static.zebra.lt) Quit (Ping timeout: 276 seconds)
  • [08:02:55] <koen> Beagle6: I use angstrom, which gives you 4.6.2
  • [08:03:49] <Beagle6> how did u install 4.6.2? cross compile or using opkg?
  • [08:04:06] <koen> I only install things using opkg
  • [08:04:40] <Beagle6> tell me more about installing qt using opkg
  • [08:04:54] * Nilly (~75f11136@gateway/web/freenode/x-wrzubyrimrjyrkgh) Quit (Ping timeout: 252 seconds)
  • [08:05:04] <Beagle6> cos i did cross compilation, which might have had side effects
  • [08:05:38] * jack_lee (~75f11136@gateway/web/freenode/x-ztpdwdsrqkhuvqna) Quit (Ping timeout: 252 seconds)
  • [08:07:32] * jpirko (~jirka@nat/redhat/x-uxsvrqwgcyxracjs) has joined #beagle
  • [08:07:39] * nlCortana (~myemail@ip45-216-212-87.adsl2.static.versatel.nl) Quit (Ping timeout: 240 seconds)
  • [08:08:54] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) Quit (Read error: Operation timed out)
  • [08:12:49] <Beagle6> koen: the name of the package will help
  • [08:13:53] <_koen_> there are tons of qt4 packages
  • [08:14:01] <_koen_> opkg list | grep qt4-embedded
  • [08:14:08] <_koen_> for sgx you want at least qt4-embedded-plugin-gfxdriver-gfxpvregl
  • [08:16:18] * Septalici (~bakljg@c-24-131-138-21.hsd1.mn.comcast.net) Quit ()
  • [08:16:38] <Beagle6> strange, i can't find tons of packages even after opkg update
  • [08:17:10] <Beagle6> and the qt4-embedded i find is 4.4.1
  • [08:19:56] * Amit_Karpe (~7beef129@gateway/web/freenode/x-hwwdifekqgoraajs) Quit (Ping timeout: 252 seconds)
  • [08:21:59] <Beagle6> i think my angstrom feeds are old..
  • [08:23:22] * Psychiatras (~psy@213-190-49-43.static.zebra.lt) has joined #beagle
  • [08:24:57] * notaz (~notaz@213-190-49-43.static.zebra.lt) has joined #beagle
  • [08:26:50] <Beagle6> koen: can u tell me the feed url?
  • [08:26:52] <_koen_> Beagle6: hop to http://www.angstrom-distribution.org/narcissus/ and create a new one, the "platform specific" section has the sgx bits for qt, the 'console' section has the qt demos
  • [08:28:05] * siji (~siji@122.169.26.164) has joined #beagle
  • [08:28:20] <Beagle6> k thanks
  • [08:30:44] <Beagle6> thanks for all the help. 1 last question, can i do that by updating feeds in /etc/opkg?
  • [08:31:50] <_koen_> no
  • [08:31:59] <_koen_> the different release are incompatible
  • [08:32:29] <_koen_> not "will not ever work" incompatibale but "strange symbol errors and segfaults" incompatible
  • [08:33:19] * JamieBennett (~JamieBenn@Maemo/community/contributor/JamieBennett) has joined #beagle
  • [08:33:19] <Beagle6> ok thnx. i tried narcissus build before, the site doesnt return me images after few hours. bad luck?
  • [08:33:27] * rcn-ee (~voodoo@65.91.54.2) has joined #beagle
  • [08:34:28] * Amit_Karpe (~dev@123.238.241.41) has joined #beagle
  • [08:35:44] <Beagle6> koen : thnks for your time. narcissus build was fast this time
  • [08:36:43] <koen> narcissus can get quite slow on busy days: http://www.angstrom-distribution.org/narcissus/graph.php?timeframe=90&machine=beagleboard
  • [08:43:19] * Nilly (~744a78d3@gateway/web/freenode/x-xhouooyqgbzzsiff) has joined #beagle
  • [08:44:10] <XorA> did a new batch of beagles get shipped at the weekend :-)
  • [08:45:37] * guillaum1 (~gl@AMontsouris-153-1-81-219.w90-2.abo.wanadoo.fr) Quit (Quit: Leaving.)
  • [08:50:58] <Nilly> aprat from NAND and mmc card any way to load MLO and uboot?
  • [08:51:26] <av500> serial
  • [08:51:27] <av500> usb
  • [08:51:33] <av500> butterflies
  • [08:55:37] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) has joined #beagle
  • [08:56:03] <Nilly> serial?
  • [08:56:06] <Nilly> possible?
  • [08:56:39] <Nilly> but my board doen't boot...
  • [08:56:44] * julianoliver (~julian@g225113242.adsl.alicedsl.de) Quit (Ping timeout: 252 seconds)
  • [08:56:55] * Chris____ (~d456d2d3@gateway/web/freenode/x-jkmvsdoozjetvjzr) has joined #beagle
  • [08:57:52] <av500> yes, serial is possible
  • [08:57:54] * julianoliver (~julian@g225113242.adsl.alicedsl.de) has joined #beagle
  • [08:58:01] * ssvb (~ssvb___@a88-112-120-50.elisa-laajakaista.fi) Quit (Quit: Leaving)
  • [08:58:45] * Chris____ (~d456d2d3@gateway/web/freenode/x-jkmvsdoozjetvjzr) Quit (Client Quit)
  • [08:59:21] * ChrisAVR (~d456d2d3@gateway/web/freenode/x-vgdodecntkwgidlp) has joined #beagle
  • [08:59:27] <ChrisAVR> Hi
  • [08:59:52] * Belna (~Thomas@DSL01.212.114.252.242.ip-pool.NEFkom.net) has joined #beagle
  • [09:01:00] * Nilly (~744a78d3@gateway/web/freenode/x-xhouooyqgbzzsiff) Quit (Ping timeout: 252 seconds)
  • [09:01:09] <av500> Lo
  • [09:01:13] <ChrisAVR> I recently setuped Angstrom/2.6.32/beagleboard and did a reboot from mmc; but it seems the system is stuck after telling me ...done, booting the kernel.
  • [09:01:27] * Beagle6 (~Beagle6@ex1.amadoc.jp) Quit (Quit: Beagle6)
  • [09:01:30] <ChrisAVR> what could go wrong? shouldnt the terminal send something else out?
  • [09:02:52] <ChrisAVR> nobody using angstrom?
  • [09:03:28] * Nilly (~744a78d3@gateway/web/freenode/x-mqkhzrnnxchwncuu) has joined #beagle
  • [09:04:04] <Nilly> av500:thx i will search the data and try booting from serial ...
  • [09:04:34] <Nilly> av500:small question is it possible to boot another u boot from u boot prompt?
  • [09:08:57] <btr_26> <ChrisAVR> I have just downloaded the 2.6.32-r70 from http://www.angstrom-distribution.org/demo/beagleboard/ and it works fine
  • [09:09:39] * neo01124 (~neo@122.163.113.133) has joined #beagle
  • [09:10:03] <ChrisAVR> i recently got a kernel panic...
  • [09:11:31] * Belna (~Thomas@DSL01.212.114.252.242.ip-pool.NEFkom.net) Quit (Remote host closed the connection)
  • [09:11:33] <btr_26> <ChrisAVR> why dont u try with a 2009 stable version
  • [09:11:59] * JamieBennett (~JamieBenn@Maemo/community/contributor/JamieBennett) Quit (Ping timeout: 240 seconds)
  • [09:12:10] <ChrisAVR> i thought the demo was a stable?
  • [09:12:25] <ChrisAVR> [ 26.884307] Waiting for root device /dev/mmcblk0p2...<\r><\n>
  • [09:12:37] <ChrisAVR> 27.164337] Unable to handle kernel NULL pointer dereference
  • [09:13:09] * JamieBennett (~JamieBenn@Maemo/community/contributor/JamieBennett) has joined #beagle
  • [09:13:32] * leochen (~user@note-schen.few.vu.nl) has joined #beagle
  • [09:14:05] <av500> Nilly: yes, but of course the 2nd uboot needs to be linked to a different start address
  • [09:14:58] <Nilly> ok if i rad from mmc card and load it some where else say 0x80000000 than what command i need to run it?
  • [09:16:36] * julianoliver (~julian@g225113242.adsl.alicedsl.de) Quit (Ping timeout: 276 seconds)
  • [09:16:53] * julianoliver (~julian@g225113242.adsl.alicedsl.de) has joined #beagle
  • [09:17:27] * Belna (~Thomas@DSL01.212.114.252.242.ip-pool.NEFkom.net) has joined #beagle
  • [09:18:13] <btr_26> <ChrisAVR> in your case i would give a try with stable version once
  • [09:18:19] * _roger_ (~a0740758@nat/ti/x-mhewhrqvkgaqooyk) has left #beagle
  • [09:20:39] <DaveDavenport> hmm stupid question, how do I put the beagleboard to sleep? (standby whatever)
  • [09:22:08] <koen> sing a lullaby
  • [09:22:23] <koen> if that doesn't work, valium helps
  • [09:24:07] * tomatoes7 (~fatboy-ub@76.197.13.149) Quit (Ping timeout: 260 seconds)
  • [09:24:32] <DaveDavenport> hmmm
  • [09:24:42] <DaveDavenport> standup comedy night is this night
  • [09:24:56] <DaveDavenport> queensday on the markt
  • [09:25:31] * Amit_Karpe (~dev@123.238.241.41) Quit (Ping timeout: 248 seconds)
  • [09:26:29] * Entasis (~Jarred@ppp118-210-175-167.lns20.adl6.internode.on.net) has joined #beagle
  • [09:26:44] <ChrisAVR> <btr_26> thanks for your advice, but how long took it for you after you saw the message 'booting the kernel'?
  • [09:27:15] <ChrisAVR> <btr_26> i suppose something went wrong because the ext3 partition was defect
  • [09:28:47] <DaveDavenport> ok echo'ing mem to /sys/power/state
  • [09:29:57] * _roger_ (~a0740758@nat/ti/x-allcvbqkpswncifk) has joined #beagle
  • [09:31:04] * leochen (~user@note-schen.few.vu.nl) Quit (Remote host closed the connection)
  • [09:31:05] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) has joined #beagle
  • [09:32:18] * lilly (~744a78d3@gateway/web/freenode/x-pdqddppuydzjklch) has joined #beagle
  • [09:32:28] * Nilly (~744a78d3@gateway/web/freenode/x-mqkhzrnnxchwncuu) Quit (Quit: Page closed)
  • [09:32:33] <btr_26> <ChrisAVR> it took me ~30 sec's
  • [09:33:04] <btr_26> <ChrisAVR> the first boot was a bit long
  • [09:33:20] * guillaum1 (~gl@AMontsouris-153-1-81-219.w90-2.abo.wanadoo.fr) has joined #beagle
  • [09:33:37] <lilly> Is there any problem on narcisuus?
  • [09:33:44] <lilly> It build everything but not giving download link to save images
  • [09:34:25] * michale (~744a78d3@gateway/web/freenode/x-wkjgakhupobghasx) has joined #beagle
  • [09:36:02] <ChrisAVR> <btr_26> a bit long like about 10min?
  • [09:36:21] <btr_26> no around a minute :-)
  • [09:37:14] <ChrisAVR> <btr_26> ok, i definitely waited longer. I'll give it another first-boot-try with the 32; on recurring problems i'll check 27
  • [09:40:46] <btr_26> <ChrisAVR> good luck!
  • [09:44:35] * Amit_Karpe (~dev@115.108.145.200) has joined #beagle
  • [09:45:29] <lilly> Can anyone answer my query ?
  • [09:45:45] <av500> maybe just wait?
  • [09:46:41] <lilly> is it possible if my net connection disturbed and it breaks building and creating image
  • [09:48:58] * courvill1 (~courville@wis38-1-82-236-159-101.fbx.proxad.net) Quit (Ping timeout: 264 seconds)
  • [09:51:40] <michale> is there any books for cortex-a8 development
  • [09:52:05] <av500> the ARM ARM
  • [09:52:21] <michale> I have trm from ARM
  • [09:53:00] <lilly> yestrday i waited for 3 hours to complete building, zip process ? But no positive outcome.
  • [09:54:02] * stela (~744a78d3@gateway/web/freenode/x-xuejhusimhwkcmou) has joined #beagle
  • [09:55:31] * julianoliver (~julian@g225113242.adsl.alicedsl.de) Quit (Ping timeout: 245 seconds)
  • [09:56:27] * julianoliver (~julian@g225113242.adsl.alicedsl.de) has joined #beagle
  • [09:57:25] <btr_26> <lilly> just click on the packages link
  • [09:58:26] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Ping timeout: 245 seconds)
  • [09:58:31] <ChrisAVR> <btr_26> thanks, but after 10min i give up; trying 27 now
  • [09:58:50] * dougztr (~quassel@c-76-125-129-233.hsd1.pa.comcast.net) Quit (Quit: No Ping reply in 180 seconds.)
  • [09:58:53] * dougztr (~quassel@2001:4830:16e9:0:20a:e6ff:fed8:419e) has joined #beagle
  • [09:58:54] * TheUni (~quassel@xbmc/staff/theuni) Quit (Quit: No Ping reply in 180 seconds.)
  • [09:59:14] * TheUni (~quassel@xbmc/staff/theuni) has joined #beagle
  • [09:59:41] * DaQatz (~db@c-71-233-36-189.hsd1.nh.comcast.net) Quit (Ping timeout: 245 seconds)
  • [09:59:47] * ppotera_ (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Ping timeout: 246 seconds)
  • [09:59:59] * ppotera_ (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [10:00:09] * mewyn (~mewyn@c-98-228-137-171.hsd1.il.comcast.net) Quit (Ping timeout: 265 seconds)
  • [10:00:50] * mewyn (~mewyn@c-98-228-137-171.hsd1.il.comcast.net) has joined #beagle
  • [10:00:55] <lilly> btr_26 : Assembling images has been completed and uncompressed image size is 938M
  • [10:01:56] <btr_26> <lilly> i had the same problem yesterday, As i expected a image with that size
  • [10:02:15] * DaQatz (~db@c-71-233-36-189.hsd1.nh.comcast.net) has joined #beagle
  • [10:04:56] * jserv-- (~jserv@61-30-10-70.static.tfn.net.tw) Quit (Ping timeout: 252 seconds)
  • [10:05:25] * jserv-- (~jserv@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [10:09:47] * william_zhang (~william@58.247.126.174) Quit (Quit: Leaving)
  • [10:15:20] * nlCortana (~myemail@ip45-216-212-87.adsl2.static.versatel.nl) has joined #beagle
  • [10:15:42] <DaveDavenport> I am booting my new RevC4 and I get *** Warning Bad CRC or NAND, using default environment
  • [10:16:14] * mcgeagh (~mcgeagh@xbmc/staff/mcgeagh) has joined #beagle
  • [10:17:07] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Quit: WeeChat 0.3.2)
  • [10:18:15] <hrw> DaveDavenport: do "save" in uboot
  • [10:18:59] <koen> or not
  • [10:19:11] <koen> it's better to use a boot.scr to poke at vars
  • [10:19:11] <aholler_> start thinking ;)
  • [10:19:39] <koen> peopple messing up the uboot env accounts for 75% of the RMAs AIUI
  • [10:19:56] * aholler_ is now known as aholler
  • [10:19:57] <koen> it's easy enough to fix yourself, though
  • [10:20:07] <hrw> koen: sure, but saving default env should not break anythin
  • [10:20:28] <koen> untill the default env changes :)
  • [10:21:08] * XorA suspects the nand could be happilly removed with most people not noticing :-)
  • [10:21:37] <koen> guess what we did on the xm :)
  • [10:22:05] <aholler> the xm doesn't have nand?
  • [10:22:10] <av500> nope
  • [10:23:19] <XorA> thats going to cut out 75% of #beagle traffic :-D
  • [10:23:30] <av500> and the DB9 the other 25%
  • [10:23:52] * XorA rolls out the tumbleweed in preperation
  • [10:23:55] <koen> that's why we added the memory corruption, to keep this channel alive
  • [10:24:19] * XorA hopes XM ships with a script to format the SD cards :-D
  • [10:24:24] <av500> koen: well, we will have much more time to debate linux distribution subtleties...
  • [10:24:50] <koen> XorA: it will shop with an sd card having angstrom installed + sources
  • [10:24:55] <XorA> there are no subtelties, Angstrom rules with a 10lb lump hammer :-)
  • [10:24:58] <av500> XorA: it should ship with preimages sdcard and the write protect glued shut
  • [10:25:14] <koen> av500: WP on uSD?
  • [10:25:18] <av500> damn
  • [10:25:24] <av500> ok, dont connect /WR :)
  • [10:25:28] <koen> :)
  • [10:29:52] * JamieBennett (~JamieBenn@Maemo/community/contributor/JamieBennett) Quit (Read error: Connection reset by peer)
  • [10:35:58] * lilly (~744a78d3@gateway/web/freenode/x-pdqddppuydzjklch) Quit (Ping timeout: 252 seconds)
  • [10:36:58] * rs (~7aa60de8@gateway/web/freenode/x-tiioaaefdtlvqlfd) has joined #beagle
  • [10:38:46] * _roger_ (~a0740758@nat/ti/x-allcvbqkpswncifk) Quit (Ping timeout: 264 seconds)
  • [10:38:48] * JamieBennett (~JamieBenn@Maemo/community/contributor/JamieBennett) has joined #beagle
  • [10:52:39] <nlCortana> hi, is it possible to connect a standard USB keyboard to the usb host of BB? cause it seems not working
  • [10:53:20] <mru> the ehci port is high-speed only
  • [10:53:30] <mru> you need to use a hub to connect a keyboard
  • [10:53:37] <mru> or any low/full-speed device
  • [10:54:17] * dl9pf_ (~quassel@p5B213F12.dip.t-dialin.net) has joined #beagle
  • [10:54:54] <aholler> disabling saveenv in u-boot would have benn better than to remove the nand, imho.
  • [10:55:06] * dl9pf (~quassel@opensuse/member/dl9pf) Quit (Ping timeout: 245 seconds)
  • [10:55:17] <mru> aholler: how would that have saved money?
  • [10:55:43] <aholler> does nand still cost that much?
  • [10:55:54] <mru> more than nothing
  • [10:57:14] * lilly (~744a78d3@gateway/web/freenode/x-cpsnundsuhqtscnj) has joined #beagle
  • [10:59:41] <aholler> but without nand the beagleboard totally looses it's usage as prototype board.
  • [10:59:58] * noway (~29e3c457@gateway/web/freenode/x-tgpvczsyxybpdrmz) has joined #beagle
  • [11:00:03] <av500> nope
  • [11:00:45] <av500> we prototyped products with it nicely without touching the nand
  • [11:01:40] <av500> koen: composite out on zoom2/3?
  • [11:02:27] <koen> av500: never used it, I think I lack the jack cable for that
  • [11:03:58] <av500> so do we
  • [11:04:07] <av500> 4 pin 2.5mm, nice choise
  • [11:07:15] <stela> is reading of MLO from NAND is possible from uboot prompt?
  • [11:07:56] <adj> yes
  • [11:09:05] <stela> how can one do that?
  • [11:09:13] * Nilly (~744a78d3@gateway/web/freenode/x-rfumlkzolrutgsme) has joined #beagle
  • [11:12:01] * michale (~744a78d3@gateway/web/freenode/x-wkjgakhupobghasx) Quit (Quit: Page closed)
  • [11:14:00] <stela> i am trying nand read 0x80200000 0 80000 but its not wokring
  • [11:14:49] <adj> nand read <memory address to load data to> 0 <size of x-loader>
  • [11:15:12] <adj> that should work. How do you determine that it's not working?
  • [11:15:34] <stela> its not coming again to the u boot prompt
  • [11:15:37] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Remote host closed the connection)
  • [11:15:38] <stela> hanging there
  • [11:15:40] <adj> as it should
  • [11:15:58] <adj> that just reads the data from nand and puts it to the defined memory area, that's it
  • [11:16:26] <stela> ya ...do i have do some kind of init something?
  • [11:16:39] <adj> what would you like to do with the data? run it or save it to a file?
  • [11:16:59] <stela> save it
  • [11:18:36] * rcn-ee (~voodoo@65.91.54.2) Quit (Quit: Leaving)
  • [11:18:40] <stela> is it possible to run MLO from u boot prompt if i have read it in memory address somewhere 0x80200000?
  • [11:23:15] <mru> no
  • [11:23:21] <rs> i have lots of kernel messages comming in dmesg and things get overritten, how can i trap these messages on the fly so that i dont miss any of them?
  • [11:23:39] <mru> rs: use a sane terminal
  • [11:24:19] <stela> mru:uboot?
  • [11:24:19] <aholler> or raise the amount of memory for the messages. there exists an kernel config paramter for
  • [11:24:45] <rs> i increased the dmesg buffer limit - i know there is way of storing these kernel messages to a file, unable to recollect
  • [11:25:43] <mru> stela: mlo (x-load) needs to run from a specific address in sram
  • [11:25:55] <aholler> rs: klogd
  • [11:25:57] <mru> you could probably load it there and run it from u-boot
  • [11:26:27] * Amit_Karpe (~dev@115.108.145.200) Quit (Remote host closed the connection)
  • [11:27:41] <stela> ok ..if i have read u boot in ram than is it possible to run it from u boot?
  • [11:28:44] <stela> i think go <RAM address> will work?
  • [11:29:01] <aholler> not without reconfiguring and recompiling u-boot. you have to change TEXT_BASE to the location you are storing u-boot too. afterwards just execut g addr after loading it
  • [11:30:33] <rs> aholler: i have klogd running and cant see a file which stores these messages in /var
  • [11:30:53] <rs> aholler: which file does it use?
  • [11:31:26] <aholler> rs: from busybox? It might use the bb-ring-buffer (logread).
  • [11:31:49] <rs> i use angstrom filesystem
  • [11:31:55] <rs> which uses busybox
  • [11:32:01] * courvill1 (~courville@80.125.173.63) has joined #beagle
  • [11:32:24] <stela> aholler:which file?
  • [11:35:25] <aholler> beagle u-boot # git grep TEXT_BASE | grep -i beagle
  • [11:35:25] <aholler> board/ti/beagle/config.mk:TEXT_BASE = 0x80e80000
  • [11:39:13] * _roger_ (~a0740758@nat/ti/x-lysiadjwmvutleta) has joined #beagle
  • [11:40:03] * rsalveti (~rsalveti@189.115.172.36) Quit (Remote host closed the connection)
  • [11:53:11] * courvill1 (~courville@80.125.173.63) Quit (Ping timeout: 246 seconds)
  • [11:56:09] * julianoliver (~julian@g225113242.adsl.alicedsl.de) Quit (Ping timeout: 265 seconds)
  • [11:56:50] * julianoliver (~julian@g225113242.adsl.alicedsl.de) has joined #beagle
  • [12:00:40] * JamieBennett (~JamieBenn@Maemo/community/contributor/JamieBennett) has left #beagle
  • [12:01:21] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) Quit (Quit: Lost terminal)
  • [12:01:27] * gremlin[it] (~gremlin@host209-103-static.32-85-b.business.telecomitalia.it) has joined #beagle
  • [12:01:34] <gremlin[it]> hi all
  • [12:02:34] <gremlin[it]> I would like play with a beagle board as a mediacenter ... there is some prebuild images downloadable for that /
  • [12:02:35] <gremlin[it]> ?
  • [12:03:40] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) has joined #beagle
  • [12:04:40] * n3rd_dude (~70879e23@gateway/web/freenode/x-qgfaajxucinkgleq) has joined #beagle
  • [12:05:22] <n3rd_dude> hi
  • [12:05:56] <n3rd_dude> does beagleboard by any chance allow customizations?
  • [12:07:18] <av500> you can paint it any color you like
  • [12:07:27] * billybeaw (~billybeaw@ppp-58-8-33-177.revip2.asianet.co.th) has joined #beagle
  • [12:08:11] <stela> aholler: i have changed the TEXT_BASE = 0x82000000 and than i have read that in to that address and when i doing go 0x82000000 ...it is not booting
  • [12:08:51] <nlCortana> av500: lol
  • [12:09:13] <_koen_> janneg: uploading0.22+svnr24225 packages now :)
  • [12:09:17] <nlCortana> you are really addicted to your crystal ball
  • [12:09:21] <n3rd_dude> av500: fell down and bumped your head by any chance?
  • [12:09:21] <aholler> stela: do you have reconfigured and recompiled it?
  • [12:09:28] <stela> yes
  • [12:09:44] * felipec (~felipec@esprx02x.nokia.com) has joined #beagle
  • [12:09:50] <stela> i have compile again and seen in .map file also the starting address
  • [12:10:01] <_koen_> gremlin[it]: make one with narcissus
  • [12:10:02] <av500> n3rd_dude: how did you know?
  • [12:10:05] <stela> its 0x82000000
  • [12:10:23] <nlCortana> i got my beagleboard and zippy board today, everything seems to work fine, got myself a usb hub so, started playing around
  • [12:10:29] <n3rd_dude> av500: the most idiotic reply for the day
  • [12:11:02] * naeg (~naeg@194.208.239.170) has joined #beagle
  • [12:11:06] <adj> was the question any better?
  • [12:11:17] <stela> m i missing something?
  • [12:11:22] * n3rd_dude (~70879e23@gateway/web/freenode/x-qgfaajxucinkgleq) Quit (Quit: Page closed)
  • [12:11:34] <stela> aholler: m i missing something?
  • [12:11:36] <aholler> stela: I don't know if that address might be in conflict with something else, but that's what I successfully use on another device
  • [12:11:38] <ChrisAVR> question regarding uboot: is version 2010.03-rc1 recommended, as I keep getting kernel panic errors
  • [12:11:42] <nlCortana> anway, tryed gstreamer but gave me an cmem error after executing this: gst-launch videotestsrc ! autovideosink
  • [12:11:50] <av500> cmem loaded?
  • [12:11:58] <av500> paste error
  • [12:11:59] <nlCortana> how to do that?
  • [12:12:01] <av500> paste lsmod
  • [12:12:06] <aholler> stela: check the config in configs/*
  • [12:12:07] <av500> paste kernel command line
  • [12:12:26] <nlCortana> cmem is not loded
  • [12:12:29] * lilly (~744a78d3@gateway/web/freenode/x-cpsnundsuhqtscnj) Quit (Quit: Page closed)
  • [12:12:32] <stela> aholler:may be i wil try another address
  • [12:12:34] <stela> ?
  • [12:12:52] <nlCortana> yeah thats a bit of a problem im working on it as a standalon computer
  • [12:13:17] <nlCortana> keyboard inout is not working through serial so i connected thorugh dvid and usb keyboard
  • [12:13:29] <nlCortana> inout = input
  • [12:13:31] <aholler> don't know, as I said, have a look at the config in configs, u-boot is very customizable and I haven??t had a lokk at the beagel-config
  • [12:14:32] <stela> aholler: ok thx...will try ..
  • [12:15:41] <aholler> stela: you have to load u-boot.bin, not u-boot
  • [12:15:47] <aholler> just in case ;)
  • [12:16:03] <av500> nlCortana: there should be a loadmodules.sh somewhere
  • [12:16:39] <nlCortana> need to execute that?
  • [12:16:47] <av500> yes
  • [12:16:57] <av500> or at least look inside
  • [12:17:09] <av500> you need to have dsplinkk, lpm and cmem modules loaded
  • [12:17:18] <nlCortana> dsplinkk is loaded
  • [12:17:24] <nlCortana> so we have a start here
  • [12:17:29] <av500> usually TI does that with this loadmodules.sh script in their examples
  • [12:17:39] <av500> kernel cmd line?
  • [12:17:41] * julianoliver (~julian@g225113242.adsl.alicedsl.de) Quit (Ping timeout: 246 seconds)
  • [12:17:48] <nlCortana> ?
  • [12:17:56] <av500> what is your kernel command line
  • [12:18:03] <gremlin[it]> _koen_, mhh can you point me to a site about narcissus ? ... which software will you sugegst ? (xmbc or other)
  • [12:18:23] <nlCortana> sorry i don't understand
  • [12:18:33] <nlCortana> i typed lsmod and saw dsplinkk was loaded
  • [12:18:47] <av500> yes
  • [12:18:55] <nlCortana> by lpm_omap3530
  • [12:19:03] <av500> ok
  • [12:19:13] <av500> so I assume cmem loading failed
  • [12:19:21] <av500> so I need to know your kernel command line
  • [12:19:38] <_koen_> gremlin[it]: http://www.angstrom-distribution.org/narcissus/
  • [12:20:01] <_koen_> nlCortana: cat /proc/cmdline
  • [12:21:10] <gremlin[it]> _koen_, suggestion for the multimedia engine / interface ?
  • [12:21:27] <_koen_> av500: you're getting at the first line of http://www.angstrom-distribution.org/demo/beagleboard/README.txt right?
  • [12:21:50] * NotZed (~notzed@ppp121-45-21-119.lns20.adl2.internode.on.net) has joined #beagle
  • [12:22:13] <av500> _koen_: eventually :)
  • [12:22:22] <av500> but you have to spoil it
  • [12:22:50] <av500> nlCortana: http://www.angstrom-distribution.org/demo/beagleboard/README.txt 1st line
  • [12:24:47] <_koen_> if you use http://dominion.thruhere.net/koen/OE/dsplink.cmd.scr as boot.scr it will set up for 720p display and the memoery hole needed for cmem
  • [12:25:01] * _koen_ waits for av500 to make a remark about the hole size
  • [12:25:19] * NishanthMenon (~nmenon@nat/ti/x-qrxzbzgprqlkqvsz) has joined #beagle
  • [12:27:30] <av500> err
  • [12:28:18] <nlCortana> av500: my commandline: console=ttyS2,115200n8 vram=12M omapfb.mode=devi:1024x768MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  • [12:28:35] <nlCortana> (need to type over from screen, noob i am :P)
  • [12:28:50] <av500> nlCortana: http://www.angstrom-distribution.org/demo/beagleboard/README.txt 1st line
  • [12:30:19] <nlCortana> thanks
  • [12:30:58] <av500> _koen_: it is not 40M, but now only 29?
  • [12:33:09] * RazZziel (~raziel@udc-cesga.udc.es) Quit (Ping timeout: 276 seconds)
  • [12:35:39] * rsalveti (~rsalveti@200.184.118.136) has joined #beagle
  • [12:39:34] <janneg> _koen_: based on 0.22-fixes or 0.23-fixes? 0.23 is ready but the release process was derailed
  • [12:39:57] * DJWillis (djwillis@cpc1-bath2-0-0-cust327.aztw.cable.virginmedia.com) Quit (Read error: Connection reset by peer)
  • [12:40:03] * DJW|Home (djwillis@cpc1-bath2-0-0-cust327.aztw.cable.virginmedia.com) has joined #beagle
  • [12:42:35] * nfl (nfl@unaffiliated/nfl) has joined #beagle
  • [12:43:47] * alecrim (~alecrim@200.184.118.136) has joined #beagle
  • [12:53:25] <_koen_> janneg: 0.22
  • [12:53:33] <_koen_> janneg: .23 breaks protocol again?
  • [12:55:02] <janneg> of course
  • [12:55:46] <_koen_> *sigh*
  • [12:55:56] <_koen_> no .23 for me then
  • [12:57:12] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
  • [13:07:00] <rs> has anyone tried power management with overo on .29 with libertas module?
  • [13:07:37] * XorA is now known as XorA|gone
  • [13:10:16] * rhk (~rhk@adsl-75-44-25-53.dsl.sfldmi.sbcglobal.net) has joined #beagle
  • [13:12:03] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [13:14:13] <janneg> _koen_: there are three problems with protocoll compatibility. 1. single protocoll version for everything, 2. it's used to transfer internal data structures 3. nobody is interested in working on it and testing compatibility
  • [13:14:56] * peksha (~peksha@145.86.broadband10.iol.cz) Quit (Ping timeout: 265 seconds)
  • [13:14:56] * niclas_ (~niclas@nat/ti/x-dgeyumrpgnftrmhr) Quit (Ping timeout: 265 seconds)
  • [13:15:50] <_koen_> janneg: if noone is working on it, it wouldn't change, right? ;)
  • [13:17:01] * cmurillo (~cmurillo@186.32.57.22) has joined #beagle
  • [13:20:51] <janneg> _koen_: noone is working on protocol compatibility
  • [13:21:48] * Meizirkki (~Meizirkki@80-186-252-170.elisa-mobile.fi) has joined #beagle
  • [13:26:54] * prpplague (~dave123_a@ppp-70-249-147-9.dsl.rcsntx.swbell.net) Quit ()
  • [13:29:33] * peksha (~peksha@145.86.broadband10.iol.cz) has joined #beagle
  • [13:32:08] <nlCortana> hi, back again... fixed myself a new idc cable (serial) got a very wrong version left over of my devkit8000
  • [13:32:29] <nlCortana> think i'm better with a soldering iron then in software
  • [13:34:09] * gdm (~gdm@190.55.34.222) has joined #beagle
  • [13:34:28] * oneshel (~jim@c-98-216-198-0.hsd1.nh.comcast.net) has joined #beagle
  • [13:35:51] * nlCortana (~myemail@ip45-216-212-87.adsl2.static.versatel.nl) Quit ()
  • [13:38:56] * alancam (~a-campbel@nat/ti/x-rqjsjxqpwezsxcft) has joined #beagle
  • [13:46:32] * nlCortana (~myemail@ip45-216-212-87.adsl2.static.versatel.nl) has joined #beagle
  • [13:48:06] <nlCortana> av500: i received a url for dsp support, but i'm not very sure on adding the boot arguments, and i dont want to mess up anything. i am familiar with the devkit8000 on this but it looks different here
  • [13:49:03] * robtow (~rob@64.62.142.114) has joined #beagle
  • [13:49:16] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [13:50:17] * r1nu- (~binShellc@unaffiliated/r1nu-) Quit (Quit: #codemasters)
  • [13:50:23] <nlCortana> i have mccargs=setenv bootargs.... and nandargs=setenv bootargs
  • [13:50:57] * siji (~siji@122.169.26.164) Quit (Read error: Connection reset by peer)
  • [13:51:54] <nlCortana> see http://pastebin.com/4W5fatD7 for more details
  • [13:51:58] * emeb|mac (~ericb@ip72-223-81-194.ph.ph.cox.net) has joined #beagle
  • [13:56:22] * RazZziel (~raziel@udc-cesga.udc.es) has joined #beagle
  • [13:58:59] * BThompson (~a0193480@nat/ti/x-fvluvpgvyisovwye) has joined #beagle
  • [14:04:39] * r1nu- (~remmargor@unaffiliated/r1nu-) has joined #beagle
  • [14:06:25] * ssvb (~ssvb___@viktor.cosmicparrot.net) has joined #beagle
  • [14:07:26] <nlCortana> ok fixed the setenv
  • [14:07:36] <nlCortana> do i need to saveenv?
  • [14:08:32] * siji (~siji@122.169.31.119) has joined #beagle
  • [14:09:01] * ppotera (~ppotera@75.150.230.173) has joined #beagle
  • [14:11:03] * brijesh (~brijesh@nat/ti/x-mmtlacvypcuvmwsa) has joined #beagle
  • [14:11:20] <nlCortana> also fixed that part
  • [14:11:48] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Quit: jrmuizel)
  • [14:13:06] <av500> nlCortana: you need to have "cat /proc/cmdline" show that mem setting
  • [14:14:07] <nlCortana> root@beagleboard:~# cat /proc/cmdline
  • [14:14:07] <nlCortana> console=ttyS2,115200n8 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait mem=99M@0x80000000 mem=128M@0x88000000
  • [14:14:39] <nlCortana> lsmod shows that cmemk is now loaded too
  • [14:14:58] * likewise (~likewise@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [14:15:23] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [14:16:04] <av500> good
  • [14:16:28] <nlCortana> thanks, there is a little error during boot up: http://pastebin.com/ZP6LpB2h
  • [14:16:50] <nlCortana> after cmem loading it fails to load g_cdc
  • [14:17:01] <nlCortana> dont know whatever that is, how bas is it?
  • [14:17:02] <nlCortana> :P
  • [14:17:06] <nlCortana> *bad
  • [14:17:57] <av500> thats a usb device module
  • [14:18:18] <av500> ignore that
  • [14:18:24] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Client Quit)
  • [14:19:48] <nlCortana> hmm could be my quickcam messenger
  • [14:20:26] <nlCortana> it doesn't show up as /dev/video0 either
  • [14:20:46] <nlCortana> but the testline gst-launch
  • [14:21:13] <nlCortana> gst-launch videotestsrc ! autovideosink still refuses to work
  • [14:21:53] * maria (~mrodrigue@186.32.57.22) has joined #beagle
  • [14:22:32] <nlCortana> got an error message form GstTIDmai: Unable to initialize display
  • [14:22:36] * robtow (~rob@64.62.142.114) Quit (Ping timeout: 245 seconds)
  • [14:25:20] <koen> nlCortana: use omapdmaifbsink
  • [14:26:01] <koen> nlCortana: TIDmaiVideoSink just needs way too many "unbreakme=5 unbreakme2=fast" type of options
  • [14:26:27] * hvaibhav (~a0393758@192.163.20.231) Quit (Remote host closed the connection)
  • [14:26:27] * khasim (~a0393720@192.163.20.231) Quit (Remote host closed the connection)
  • [14:27:13] * khasim (~a0393720@192.163.20.231) has joined #beagle
  • [14:27:15] * ssvb (~ssvb___@viktor.cosmicparrot.net) Quit (Quit: Leaving)
  • [14:27:23] * hvaibhav (~a0393758@192.163.20.231) has joined #beagle
  • [14:27:40] * ssvb (~ssvb___@viktor.cosmicparrot.net) has joined #beagle
  • [14:28:10] <nlCortana> almost koen: Could not initialies X output
  • [14:28:29] <nlCortana> and could not open display
  • [14:28:53] * katie_ (~katierh@nat/ti/x-kmimekqqrysnekoh) Quit ()
  • [14:30:35] <koen> nlCortana: try 'echo 4000000 > /sys/class/graphics/fb1/size'
  • [14:30:54] * koen is using: console=ttyS2,115200n8 mpurate=600 vram=20M omapfb.mode=dvi:hd720 mem=99M@0x80000000 mem=128M@0x88000000 omapfb.vram=0:12M,1:4M,2:4M omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  • [14:31:47] <nlCortana> damn, you are great _o_
  • [14:31:54] <nlCortana> works
  • [14:32:43] <koen> I keep forgetting some apps don't try to allocate the framebuffer size
  • [14:32:49] <koen> and I put the sizes in bootargs
  • [14:33:08] <nlCortana> aha
  • [14:33:12] * noway (~29e3c457@gateway/web/freenode/x-tgpvczsyxybpdrmz) Quit (Ping timeout: 252 seconds)
  • [14:33:25] <koen> omapfb.vram=0:12M,1:4M,2:4M <- that bit
  • [14:33:29] * siji (~siji@122.169.31.119) Quit (Quit: Leaving)
  • [14:33:42] * av500 shakes head at such archaic methods
  • [14:33:47] <koen> the first fb is so huge to do tripple buffering for 720p 32bit displays
  • [14:33:53] * emeb|mac (~ericb@ip72-223-81-194.ph.ph.cox.net) Quit (Ping timeout: 252 seconds)
  • [14:35:02] <nlCortana> but if i wat to play an encoded video, does it now automatically decode using the dsp?
  • [14:35:11] * av500 has "1:0,2:0"
  • [14:35:21] * tomatoes7 (~fatboy-ub@76.197.13.149) has joined #beagle
  • [14:36:53] <_koen_> av500: to turn those into v4l?
  • [14:37:12] <_koen_> nlCortana: if the ti plugin has a codec for it, yes
  • [14:37:13] <av500> to provide cmem alloced buffers when needed
  • [14:37:22] <av500> not all the time for nothing
  • [14:37:42] <av500> saves you a copy too
  • [14:38:03] <_koen_> nlCortana: but beware that gstreamer autopluggins has a tendency to insert audioresample, swscale, ffmpegcolourspace, etc
  • [14:38:33] * likewise (~likewise@82-171-51-231.ip.telfort.nl) Quit (Quit: likewise)
  • [14:38:38] <nlCortana> yes, i have to create the pipeline myself
  • [14:38:46] <nlCortana> or cross compile thos libs
  • [14:38:51] <_koen_> and for h264 it can only do baseprofile
  • [14:38:52] <av500> _koen_: i hear that gst is becoming indstry std for embedded mm, so above must be the "enterprise" bits :)
  • [14:38:59] * likewise (~likewise@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [14:39:15] <nlCortana> _koen_: what d you mean by baseprofile?
  • [14:39:20] <_koen_> nlCortana: all gst plugins should be already available thru opkg
  • [14:39:21] * likewise (~likewise@82-171-51-231.ip.telfort.nl) Quit (Client Quit)
  • [14:39:30] <av500> nlCortana: H264 base profile
  • [14:39:36] <_koen_> nlCortana: h264 has different profiles
  • [14:40:51] <nlCortana> thanks, i'm wikiing on it now: http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC#Profiles
  • [14:41:08] <nlCortana> but i need to do some h264 encoding
  • [14:41:12] <nlCortana> is it possible?
  • [14:41:19] <av500> no
  • [14:41:34] <av500> well, yes, but not with the free codecs from ti
  • [14:41:50] <nlCortana> whoops. made some mistakes then
  • [14:43:17] <av500> depending on the res, you could try x264
  • [14:43:34] <nlCortana> yes, but then the cortex will do all the work
  • [14:43:52] <nlCortana> ress will be 640x480
  • [14:44:06] <av500> nlCortana: yes
  • [14:44:15] <av500> nlCortana: yes the a8 will do the work
  • [14:44:17] <_koen_> av500: there's a TIVidenc pluging, doesn't that do h264?
  • [14:44:23] <av500> koen: does it?
  • [14:44:28] <av500> no idea
  • [14:44:57] <av500> _koen_: where does the "pluging" take place? :)
  • [14:44:59] * nfl (nfl@unaffiliated/nfl) Quit (Ping timeout: 248 seconds)
  • [14:45:18] <XorA|gone> av500: you know those strange dutch guys, dont ask in public :-D
  • [14:45:24] * _koen_ is king of typos
  • [14:45:52] * katie_ (~katierh@nat/ti/x-vhvqcsyctshthdyl) has joined #beagle
  • [14:46:34] * mcgeagh (~mcgeagh@xbmc/staff/mcgeagh) Quit (Quit: Ex-Chat)
  • [14:46:41] * tsjsieb (~tsjsieb@dejongbeheer.nl) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.5.9/20100401213457])
  • [14:47:32] <nlCortana> haha, lol
  • [14:48:27] * mcgeagh (~mcgeagh@xbmc/staff/mcgeagh) has joined #beagle
  • [14:49:46] <nlCortana> but this site seems to have codecs for me http://software-dl.ti.com/dsps/dsps_public_sw/codecs/OMAP35xx/index_FDS.html
  • [14:51:06] <av500> _koen_: what is in TIVidenc?
  • [14:51:36] * neo01124 (~neo@122.163.113.133) Quit (Remote host closed the connection)
  • [14:52:33] <av500> nlCortana: yes, TI is getting soft, giving away codecs for free like that
  • [14:54:15] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [14:54:51] * guntshi (~c05e5e69@gateway/web/freenode/x-mtdzdwigtlsmdoxo) has joined #beagle
  • [14:54:53] <koen> av500: mpeg4 and h264 according to gst-inspect
  • [14:54:58] <av500> ok
  • [14:55:02] <av500> nlCortana: go encode
  • [14:55:15] <koen> av500: http://pastebin.com/Je4RTzBs
  • [14:56:31] * av500 marvells at the maximum resolution these ti codecs support, must be powerfull dsp indeed
  • [14:56:34] <nlCortana> next step for me is to find out how to install it
  • [14:56:51] <av500> it is installed
  • [14:57:02] <av500> [16:39] <_koen_> nlCortana: all gst plugins should be already available thru opkg
  • [14:57:04] <nlCortana> how do you know that?
  • [14:57:04] <guntshi> is there an OpenVG solution that could be ported to C64+ DSP, this is for a device that does not have an SGX like OMAP3
  • [14:57:06] <av500> installable
  • [14:57:34] * emeb (~ericb@ip72-223-81-194.ph.ph.cox.net) has joined #beagle
  • [14:59:09] * alancam (~a-campbel@nat/ti/x-rqjsjxqpwezsxcft) Quit (Ping timeout: 276 seconds)
  • [14:59:18] * alancam (~a-campbel@nat/ti/x-mcxbyvdfcitpkuck) has joined #beagle
  • [15:00:39] * jpirko (~jirka@nat/redhat/x-uxsvrqwgcyxracjs) Quit (Remote host closed the connection)
  • [15:01:40] * djlewis (~djlewis@75.15.65.205) has joined #beagle
  • [15:03:52] * hvaibhav (~a0393758@192.163.20.231) Quit (Quit: Leaving.)
  • [15:04:28] <nlCortana> anybody experienced with ethernet on zippi combo board?
  • [15:04:30] * soman (~somnath@stargate.starnet.fi) Quit (Read error: Operation timed out)
  • [15:04:44] <av500> yes, but he is not here yet
  • [15:05:06] <nlCortana> when i execute ifconfig i only see the loopback adapter
  • [15:05:26] * soman (~somnath@stargate.starnet.fi) has joined #beagle
  • [15:08:14] <btr_26> <nlCortana> I have the same problem
  • [15:09:44] <nlCortana> btr_26: if i know how to fix it i will tel you
  • [15:10:11] <btr_26> <nlCortana> I have tried with zippy2 demo image and it recognizes ethernet but not my keyboard/mouse
  • [15:10:55] * hansdampf (~moritz@campus-auth001.fh-regensburg.de) has joined #beagle
  • [15:11:09] <nlCortana> hmmm, i just builded an image using narcissus
  • [15:12:17] <nlCortana> zippy support is standard for bb afaik
  • [15:13:09] <btr_26> are u using zippy or zippy2?
  • [15:13:49] <nlCortana> first version i think
  • [15:13:54] <nlCortana> 10base/t?
  • [15:14:29] <_koen_> make sure you use the MLO/uboot from angstrom,not the ones that came with the board
  • [15:14:32] <btr_26> i am using 10/100BaseT
  • [15:14:45] <_koen_> http://www.angstrom-distribution.org/demo/beagleboard/
  • [15:15:04] <_koen_> that uboot will detect the know expansion boards and configure them
  • [15:15:16] <av500> m(
  • [15:15:23] <rs> has anyone tried suspend-resume with libertas wifi module?
  • [15:15:31] * r1nu- (~remmargor@unaffiliated/r1nu-) Quit (Ping timeout: 245 seconds)
  • [15:16:31] <btr_26> <_koen_> good tip..i will try that now
  • [15:17:26] <rs> i find that when the i do suspend and after resume. i dont find the wlan interface
  • [15:19:15] <nlCortana> <_koen_> think my problem is that too, since i only copied uImage to mmc
  • [15:19:26] <nlCortana> it's still using the bb bootloader
  • [15:19:55] <nlCortana> but i have to leave, thanks for the support on this channel
  • [15:20:07] * nlCortana (~myemail@ip45-216-212-87.adsl2.static.versatel.nl) Quit ()
  • [15:20:50] * scrp3l_ (~scrp3l__@201.250.162.95) has joined #beagle
  • [15:24:28] * scrp3l (~scrp3l__@201.250.190.239) Quit (Ping timeout: 265 seconds)
  • [15:25:50] * djlewis (~djlewis@75.15.65.205) Quit (Quit: Leaving.)
  • [15:27:49] * jkridner (~a0321898@pdpc/supporter/active/jkridner) has joined #beagle
  • [15:28:13] <btr_26> <_koen_> my keyboard works but ethernet is still not working :-(
  • [15:28:33] <btr_26> my bootlog : http://pastebin.com/xXhkm5Lr
  • [15:33:58] * soman (~somnath@stargate.starnet.fi) Quit (Ping timeout: 258 seconds)
  • [15:36:29] <jkridner> good morning all
  • [15:36:46] * jayabharath (~a0866114@nat/ti/x-arvflcdqetikbtdn) has joined #beagle
  • [15:37:11] * gremlin[it] (~gremlin@host209-103-static.32-85-b.business.telecomitalia.it) Quit (Quit: Leaving)
  • [15:38:04] * billybeaw (~billybeaw@ppp-58-8-33-177.revip2.asianet.co.th) Quit (Quit: My damn controlling terminal disappeared!)
  • [15:38:59] * _courville_ (~marc@courville.org) has joined #beagle
  • [15:38:59] * _courville_ (~marc@courville.org) Quit (Client Quit)
  • [15:39:04] * _courville_ (~marc@courville.org) has joined #beagle
  • [15:40:45] <av500> gm
  • [15:41:33] <saschi> hi
  • [15:41:41] <saschi> the next beagle board will expose the OMAPs image ports to a header, or?
  • [15:41:58] <saschi> maybe here's the better place to ask ^-^
  • [15:43:01] <DaveDavenport> image ports?
  • [15:43:44] <saschi> image sensor ports, sry
  • [15:44:19] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [15:44:47] <av500> yes
  • [15:46:20] <saschi> av500: and the current linux kernel supports it completely?
  • [15:46:32] * likewise_ (~likewise@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [15:47:09] <saschi> av500: just connect a sensor to the parallel or serial imager interface + i2c for configuration & go?
  • [15:47:45] <av500> lol
  • [15:47:46] <saschi> if so, great :)
  • [15:48:03] <saschi> i mean a supported cmos sensor chip :)
  • [15:50:13] <av500> saschi: per definition a "supported" sensor chip is supported, yes
  • [15:51:19] <saschi> av500: yeah, ok, if the image sensor interface of the SoC is supported
  • [15:52:06] <saschi> av500: i see omap24xx cam foo in the tree but no omap35xx stuff, is it compatible?
  • [15:52:30] <saschi> av500: ok, maybe i should wait for the board and try ;)
  • [15:53:37] <av500> i have no idea, but I doubt stuff will work before the boards are even there
  • [15:53:39] <saschi> alternatively i could read the omap3530 manual & the media/video parts of the kernel, ok ;)
  • [15:53:53] <saschi> av500: yeah
  • [15:53:59] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) Quit (Ping timeout: 246 seconds)
  • [15:54:34] * noway (~29e3c457@gateway/web/freenode/x-zofceamvemtlecdo) has joined #beagle
  • [15:54:40] * oneshel (~jim@c-98-216-198-0.hsd1.nh.comcast.net) Quit (Ping timeout: 258 seconds)
  • [15:55:11] <av500> saschi: yes, read that :)
  • [15:55:15] * likewise_ (~likewise@82-171-51-231.ip.telfort.nl) Quit (Quit: likewise_)
  • [15:55:54] <saschi> av500: and i could try it on a C4 board
  • [15:56:20] <saschi> av500: the complete config should work, if i put the sensor only on i2c
  • [15:56:40] * ddompe (~ddompe@186.32.57.22) has joined #beagle
  • [15:56:45] <saschi> the only thing is, that the interface get's no pixel clock, so the "end of frame" interrupt never arises
  • [15:57:13] <saschi> yeah, i guess, that's an idea to safe time :)
  • [15:57:22] <saschi> for me
  • [16:04:34] * Openfree (~Openfree`@222.65.52.67) Quit (Ping timeout: 265 seconds)
  • [16:04:45] * btr_26 (~5b08a86a@gateway/web/freenode/x-iwjtnubimwbidihu) Quit (Quit: Page closed)
  • [16:05:15] * hrw is now known as hrw|gone
  • [16:06:13] * DJW|Home (djwillis@cpc1-bath2-0-0-cust327.aztw.cable.virginmedia.com) Quit (Read error: Connection reset by peer)
  • [16:06:40] * Entasis (~Jarred@ppp118-210-175-167.lns20.adl6.internode.on.net) Quit (Quit: Leaving)
  • [16:08:05] * theholyduck (~holyduck@77.106.153.36) has joined #beagle
  • [16:08:38] * hansdampf (~moritz@campus-auth001.fh-regensburg.de) Quit (Quit: Leaving.)
  • [16:12:37] * naeg (~naeg@194.208.239.170) Quit (Ping timeout: 264 seconds)
  • [16:16:57] * ssvb (~ssvb___@viktor.cosmicparrot.net) Quit (Remote host closed the connection)
  • [16:22:52] * jayabharath (~a0866114@nat/ti/x-arvflcdqetikbtdn) Quit (Remote host closed the connection)
  • [16:23:49] * jayabharath (~a0866114@nat/ti/x-ckwnbgqwgmaxjfhc) has joined #beagle
  • [16:25:48] * niclas_ (~niclas@nat/ti/x-pjdeynyimhhzvuqt) has joined #beagle
  • [16:26:16] * tharvey (~tharvey@adsl-76-205-222-173.dsl.snlo01.sbcglobal.net) Quit (Remote host closed the connection)
  • [16:26:46] * naeg (~naeg@194.208.239.170) has joined #beagle
  • [16:28:56] * robtow (~rob@12.156.66.34) has joined #beagle
  • [16:30:50] * NotZed (~notzed@ppp121-45-21-119.lns20.adl2.internode.on.net) Quit (Ping timeout: 240 seconds)
  • [16:33:30] * mcgeagh (~mcgeagh@xbmc/staff/mcgeagh) Quit (Quit: Ex-Chat)
  • [16:35:00] * mobidev (~mobidev@94.127.205.30) Quit (Quit: I go offline...)
  • [16:39:04] * brijesh (~brijesh@nat/ti/x-mmtlacvypcuvmwsa) Quit (Quit: Leaving)
  • [16:39:28] * brijesh (~brijesh@nat/ti/x-yvoyrppylggyzgyx) has joined #beagle
  • [16:39:55] * brijesh (~brijesh@nat/ti/x-yvoyrppylggyzgyx) Quit (Client Quit)
  • [16:40:07] * brijesh (~brijesh@nat/ti/x-zfpwwzixsqxsyudf) has joined #beagle
  • [16:40:16] * brijesh (~brijesh@nat/ti/x-zfpwwzixsqxsyudf) Quit (Client Quit)
  • [16:41:00] * TheUni (~quassel@xbmc/staff/theuni) Quit (Quit: http://quassel-irc.org - Chat comfortably. Anywhere.)
  • [16:41:38] * TheUni (~quassel@xbmc/staff/theuni) has joined #beagle
  • [16:44:38] * khasim (~a0393720@192.163.20.231) Quit (Quit: Leaving.)
  • [16:50:01] * prpplague (~danders@nat/ti/x-kvslmvrdyqupyzcg) has joined #beagle
  • [16:56:38] * kg4giy (~kg4giy@pool-138-88-132-225.esr.east.verizon.net) has joined #beagle
  • [16:56:38] * kg4giy (~kg4giy@pool-138-88-132-225.esr.east.verizon.net) Quit (Changing host)
  • [16:56:38] * kg4giy (~kg4giy@linuxjournal/staff/DavidLane) has joined #beagle
  • [16:56:49] * oneshel (~jim@li38-254.members.linode.com) has joined #beagle
  • [16:57:20] * noway (~29e3c457@gateway/web/freenode/x-zofceamvemtlecdo) Quit (Quit: Page closed)
  • [17:05:05] * robtow (~rob@12.156.66.34) Quit (Remote host closed the connection)
  • [17:05:54] * _silentAssassin (~sauron@iws3.iiita.ac.in) Quit (Remote host closed the connection)
  • [17:06:43] * Keyboard_Warrior (~holyduck@77.106.156.195) has joined #beagle
  • [17:07:07] * _silentAssassin (~sauron@iws3.iiita.ac.in) has joined #beagle
  • [17:07:30] * theholyduck (~holyduck@77.106.153.36) Quit (Ping timeout: 258 seconds)
  • [17:07:47] * noway (~29e3c457@gateway/web/freenode/x-frhebvzgajvqcsiz) has joined #beagle
  • [17:13:37] * naeg (~naeg@194.208.239.170) Quit (Quit: WeeChat 0.3.2)
  • [17:21:28] * RobotGrrl (~RobotGrrl@bas2-montreal50-1176032947.dsl.bell.ca) has joined #beagle
  • [17:23:58] * jkridner (~a0321898@pdpc/supporter/active/jkridner) Quit (Ping timeout: 246 seconds)
  • [17:24:45] * Keyboard_Warrior (~holyduck@77.106.156.195) Quit (Ping timeout: 258 seconds)
  • [17:31:38] * jkridner (~a0321898@pdpc/supporter/active/jkridner) has joined #beagle
  • [17:33:54] * RazZziel (~raziel@udc-cesga.udc.es) Quit (Ping timeout: 260 seconds)
  • [17:37:09] * DJWillis (djwillis@cpc1-bath2-0-0-cust327.aztw.cable.virginmedia.com) has joined #beagle
  • [17:43:55] * DaQatz (~db@c-71-233-36-189.hsd1.nh.comcast.net) Quit (Read error: Connection reset by peer)
  • [17:46:21] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [17:46:23] * Xerion (~xerion@84.25.7.202) Quit (Ping timeout: 252 seconds)
  • [17:46:44] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [17:47:22] <ds2> morning
  • [17:48:24] <ghoti> morning?
  • [17:48:36] <ghoti> 13:46 < ds2> morning
  • [17:48:38] <av500> UGT
  • [17:48:49] <av500> ghoti: irc is on UGT
  • [17:49:25] <ghoti> ah, right.
  • [17:50:10] <ghoti> does UGT imply a flexible day length?
  • [17:51:07] <av500> it implies not to discuss it
  • [17:51:21] <av500> "...Now, instead of spending time figuring out what time of day is it for every member of the channel, we spend time explaining newcomers benefits of UGT. ..."
  • [17:51:38] <ghoti> and a flexible day length isn't considered a benefit?
  • [17:51:56] * ghoti would like 28 or 30 hour days.
  • [17:52:10] <ghoti> I'm just not sure how effective they'd be if I was in IRC the entire time.
  • [17:52:15] <ds2> 48works well for me
  • [17:52:32] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
  • [17:52:43] <ds2> Thu Apr 29 10:52:39 PDT 2010
  • [17:52:53] <ds2> also - localtime
  • [17:52:54] <djlewis_> Good Morning All, as the birds chirp and sing .... :)
  • [17:53:07] <ds2> djlewis: got slingshot? :D
  • [17:53:12] <djlewis_> rat shot
  • [17:53:48] * robtow (~rob@12.156.66.34) has joined #beagle
  • [17:53:49] * djlewis_ just loves Universal Goodmorning Time (UGT)
  • [17:56:28] * ppotera__ (~ppotera@75.150.230.173) has joined #beagle
  • [17:56:34] * ppotera__ (~ppotera@75.150.230.173) Quit (Client Quit)
  • [17:57:31] * _roger_ (~a0740758@nat/ti/x-lysiadjwmvutleta) Quit (Quit: Leaving.)
  • [17:58:53] * ppotera (~ppotera@75.150.230.173) Quit (Read error: Operation timed out)
  • [18:00:29] * likewise (~likewise@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [18:01:44] * RazZziel (~raziel@63.93.117.91.dynamic.mundo-r.com) has joined #beagle
  • [18:04:53] * Xerion (~xerion@84.25.7.202) has joined #beagle
  • [18:05:10] <robtow> beginner - any luck with you programming?
  • [18:06:54] * mobidev (~mobidev@94.127.205.30) has joined #beagle
  • [18:07:20] * noway (~29e3c457@gateway/web/freenode/x-frhebvzgajvqcsiz) Quit (Ping timeout: 252 seconds)
  • [18:17:32] * RobotGrrl (~RobotGrrl@bas2-montreal50-1176032947.dsl.bell.ca) Quit (Quit: RobotGrrl)
  • [18:25:35] * rkirti (~oespirit@203.199.213.3) has joined #beagle
  • [18:28:02] * oneshel (~jim@li38-254.members.linode.com) Quit (Remote host closed the connection)
  • [18:28:53] * oneshel (~jim@c-98-216-198-0.hsd1.nh.comcast.net) has joined #beagle
  • [18:31:51] * khasim (~a0393720@192.163.20.231) has joined #beagle
  • [18:37:15] * oneshel (~jim@c-98-216-198-0.hsd1.nh.comcast.net) has left #beagle
  • [18:45:58] * khasim (~a0393720@192.163.20.231) Quit (Ping timeout: 264 seconds)
  • [18:46:44] * brijesh (~brijesh@nat/ti/x-ojyvxvvhrujkewtp) has joined #beagle
  • [18:47:46] * Meizirkki (~Meizirkki@80-186-252-170.elisa-mobile.fi) Quit (Ping timeout: 264 seconds)
  • [18:48:25] * brijesh (~brijesh@nat/ti/x-ojyvxvvhrujkewtp) Quit (Client Quit)
  • [18:52:08] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Read error: Operation timed out)
  • [18:53:10] * Eko_ (~eko@lawn-128-61-24-55.lawn.gatech.edu) has joined #beagle
  • [18:54:32] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [18:56:14] * DaveDavenport (~qball@unaffiliated/qball) Quit (Ping timeout: 252 seconds)
  • [18:57:17] * gdm (~gdm@190.55.34.222) Quit (Ping timeout: 240 seconds)
  • [19:01:42] * gdm (~gdm@190.55.34.222) has joined #beagle
  • [19:09:25] * DaveDavenport (~qball@unaffiliated/qball) has joined #beagle
  • [19:19:10] * Meizirkki (~Meizirkki@80-186-0-161.elisa-mobile.fi) has joined #beagle
  • [19:19:46] * JDuke128 (~kadir@81.214.22.138) Quit (Read error: Connection reset by peer)
  • [19:25:22] * peksha (~peksha@145.86.broadband10.iol.cz) Quit (Quit: Leaving.)
  • [19:25:39] * JDuke128 (~kadir@81.214.22.138) has joined #beagle
  • [19:26:14] * felipec (~felipec@esprx02x.nokia.com) Quit (Quit: Leaving)
  • [19:30:41] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [19:30:52] * Eko_ (~eko@lawn-128-61-24-55.lawn.gatech.edu) Quit (Quit: Leaving)
  • [19:33:09] * levi` (~user@levi.dsl.xmission.com) has joined #beagle
  • [19:33:36] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [19:33:59] * levi (~user@levi.dsl.xmission.com) Quit (Remote host closed the connection)
  • [19:35:21] * ppotera__ (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [19:36:43] * robtow (~rob@12.156.66.34) Quit (Ping timeout: 248 seconds)
  • [19:37:47] * jayabharath (~a0866114@nat/ti/x-ckwnbgqwgmaxjfhc) Quit (Quit: Leaving.)
  • [19:39:10] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Ping timeout: 265 seconds)
  • [19:39:10] * ppotera__ is now known as ppotera
  • [19:41:48] * robtow (~rob@12.156.66.34) has joined #beagle
  • [19:45:03] * Eko_ (~eko@lawn-128-61-24-55.lawn.gatech.edu) has joined #beagle
  • [19:49:54] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Remote host closed the connection)
  • [19:50:00] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [19:51:23] * NTICompass (~NTICompas@cpe-67-247-132-84.rochester.res.rr.com) has joined #beagle
  • [19:53:25] * Ragha (~Ragha@nat/ti/x-ryqmtmjthmiztnjs) has joined #beagle
  • [19:54:30] <NTICompass> I can't seem to get the OMAP3 prompt on my beagleboard
  • [19:54:36] <NTICompass> im using a serial->USB
  • [19:54:41] * JDuke128_ (~51d6168a@gateway/web/freenode/x-bieldnapupinsbgx) has joined #beagle
  • [19:54:43] <NTICompass> and curecom
  • [19:54:46] <NTICompass> cutecom*
  • [19:55:08] <_av500_> check cabling
  • [19:55:25] * levi` is now known as levi
  • [19:55:47] <NTICompass> i did
  • [19:55:51] <NTICompass> mutiple times
  • [19:56:01] <_av500_> loopback works?
  • [19:56:11] <djlewis_> #1 cause of bad serial data to BB is cabling. #2 is port config on wkstn
  • [19:56:15] <NTICompass> what do you mean?
  • [19:56:28] <_av500_> short tx and rx
  • [19:56:32] <_av500_> without BB
  • [19:57:00] <NTICompass> i've used these cables for other stuff before
  • [19:57:14] * Meizirkki (~Meizirkki@80-186-0-161.elisa-mobile.fi) Quit (Ping timeout: 240 seconds)
  • [19:57:15] <NTICompass> my friend did try to write a bootloader to the NAND
  • [19:57:27] <NTICompass> is it possible that bootloader is doing something odd?
  • [19:57:30] <_av500_> and?
  • [19:57:42] <_av500_> press user button and boot from sd
  • [19:58:03] <_av500_> see validation wiki
  • [19:59:16] <NTICompass> oh ok
  • [19:59:24] <NTICompass> ill see what i can do
  • [19:59:26] * NTICompass (~NTICompas@cpe-67-247-132-84.rochester.res.rr.com) Quit (Quit: Ex-Chat)
  • [20:03:06] * Eko_ (~eko@lawn-128-61-24-55.lawn.gatech.edu) Quit (Quit: Leaving)
  • [20:03:07] * kg4giy (~kg4giy@linuxjournal/staff/DavidLane) Quit (Quit: Time to track the dreaded Jabberwocky!)
  • [20:07:58] <JDuke128_> hi , i want to use omapfbplay on highest performance , therefore i disabled X window system and i want to do is , force omapfbplay to use L1 and L2 caches and highest priority , how can i do these all on angstrom linux with highest performance video play ?
  • [20:08:39] <_av500_> it already uses l1 and l2
  • [20:10:07] * markos_ (~markos@athedsl-423956.home.otenet.gr) Quit (Remote host closed the connection)
  • [20:11:18] <JDuke128_> hmm , av500 any C code can force Linux to run on L1 and L2 codes ?
  • [20:11:24] <JDuke128_> i know register keyword on C
  • [20:11:29] <_av500_> it already uses l1 and l2
  • [20:11:31] <JDuke128_> but its only for cache
  • [20:11:47] <JDuke128_> but its playing 720p xvid files really slow
  • [20:12:27] <JDuke128_> i got ~25fps , i ve seen some commercial video players for beagleboard that plays even h264 on omap3
  • [20:12:33] <JDuke128_> very interesting
  • [20:12:41] <JDuke128_> i think i got driver missing ?
  • [20:12:47] <_av500_> no
  • [20:13:05] <JDuke128_> so something we need to fix for omapfbplay...
  • [20:13:29] <JDuke128_> omapfbplay gives highest priority on process automatically ?
  • [20:14:04] <_av500_> what other process should there be?
  • [20:15:00] <JDuke128_> ssh server teardrop and some standard services
  • [20:16:23] <_av500_> so notrhing that consumes cpu...
  • [20:16:23] * NTICompass (~NTICompas@cpe-67-247-132-84.rochester.res.rr.com) has joined #beagle
  • [20:16:27] * NTICompass (~NTICompas@cpe-67-247-132-84.rochester.res.rr.com) Quit (Client Quit)
  • [20:17:13] <JDuke128_> how these guys did something like this : http://www.youtube.com/watch?v=ERK6ETRytFM
  • [20:17:52] <JDuke128_> omap3 is playing 720p hd with full speed....
  • [20:18:15] <_av500_> 1) base profile = useless
  • [20:18:23] <_av500_> 2) on the dsp
  • [20:19:06] <JDuke128_> hmm they do fully dsp optimize
  • [20:19:29] <_av500_> 2) on the dsp
  • [20:20:26] <JDuke128_> i ve 600mhz beagle maybe they use 720mhz
  • [20:21:48] <JDuke128_> omapfbplay doesnt have audio , which one is fastest directfb player using audio ?
  • [20:22:36] <_av500_> JDuke128_: you cannot do 720p on the arm only
  • [20:22:43] <_av500_> if you want to have sound as well
  • [20:23:05] <_av500_> you can have limited mpeg4 720p with omapfbplay, but no sound then
  • [20:23:29] <JDuke128_> with sound any good player ? i may use with 19fps too... :S
  • [20:23:43] <_av500_> you cannot use 19fps
  • [20:23:52] <_av500_> you have to decode all frames
  • [20:24:03] <_av500_> unless you encode it with 15fps or so
  • [20:24:27] <_av500_> but then it makes more sense to encode in SD and upscale
  • [20:24:40] <JDuke128_> VP8 will be released soon , with VP8 i think we can play 720p
  • [20:24:55] <JDuke128_> on2
  • [20:25:08] <_av500_> m(
  • [20:25:09] <JDuke128_> google will opensource on2 vp8 as i read last blogs and websites
  • [20:25:49] <_av500_> yes, please wait for vp8
  • [20:28:13] * alancam (~a-campbel@nat/ti/x-mcxbyvdfcitpkuck) Quit (Ping timeout: 264 seconds)
  • [20:30:27] * jayabharath (~a0866114@nat/ti/x-nyzxibqmjmbebkly) has joined #beagle
  • [20:33:37] * alancam (~a-campbel@nat/ti/x-cjzcizsalodfcpdc) has joined #beagle
  • [20:47:38] * JDuke128 (~kadir@81.214.22.138) Quit (Ping timeout: 246 seconds)
  • [20:49:05] * JDuke128_ (~51d6168a@gateway/web/freenode/x-bieldnapupinsbgx) Quit (Quit: Page closed)
  • [20:54:53] * djlewis_ waiting 4980 seconds for a HD test to complete, argh...
  • [20:56:13] <_av500_> bring a book
  • [20:56:33] <djlewis_> surfing :)
  • [20:57:07] <djlewis_> that gets boring too when I run out of surfing interests..
  • [20:59:47] * rsalveti (~rsalveti@200.184.118.136) Quit (Remote host closed the connection)
  • [21:00:58] * ka1ser (~jbustaman@nat/ti/x-usffhpbnpdbserzq) has joined #beagle
  • [21:01:28] * rsalveti (~rsalveti@200.184.118.130) has joined #beagle
  • [21:04:55] * DanaG (~dana@pcp057409pcs.wireless.calpoly.edu) has joined #beagle
  • [21:13:15] * DanaG (~dana@pcp057409pcs.wireless.calpoly.edu) Quit (Read error: Operation timed out)
  • [21:15:20] * DanaG (~dana@pcp057409pcs.wireless.calpoly.edu) has joined #beagle
  • [21:17:05] * rhk (~rhk@adsl-75-44-25-53.dsl.sfldmi.sbcglobal.net) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.3/20100401080539])
  • [21:22:11] * rcranetx (~rcranetx@nat/ti/x-qswajdwobuwtrgxe) Quit (Quit: Leaving.)
  • [21:36:11] * Sept (~bakljg@c-24-131-138-21.hsd1.mn.comcast.net) has joined #beagle
  • [21:46:56] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [21:57:18] * DanaG (~dana@pcp057409pcs.wireless.calpoly.edu) Quit (Read error: Operation timed out)
  • [21:58:00] * DanaG (~dana@pcp057409pcs.wireless.calpoly.edu) has joined #beagle
  • [22:01:09] * rsalveti (~rsalveti@200.184.118.130) Quit (Remote host closed the connection)
  • [22:03:34] * jayabharath (~a0866114@nat/ti/x-nyzxibqmjmbebkly) has left #beagle
  • [22:09:06] * midnight1111 (~80aae00b@gateway/web/freenode/x-jyxzsjapoceacsqf) has joined #beagle
  • [22:09:57] <midnight1111> I built a u-boot.bin that doesn't work and booted with it. The script replaced the u-boot.bin on the beagleboard with my bad one.. now the board doesn't boot, can I replace the onboard u-boot?
  • [22:12:02] * alecrim (~alecrim@200.184.118.136) Quit (Ping timeout: 252 seconds)
  • [22:12:08] <Ceriand|work> midnight1111: yes, use mmc boot
  • [22:12:09] <djlewis_> http://elinux.org/BeagleBoardRecovery
  • [22:12:44] * Ceriand|work thinks we need to put that URL in the topic
  • [22:12:57] <djlewis_> yep, this is the season.
  • [22:13:10] <djlewis_> several times this week?
  • [22:13:27] <Ceriand|work> is this channel registered with Chanserv?
  • [22:14:47] <midnight1111> thx I will try it
  • [22:15:12] <dm8tbr> Ceriand|work: 22:14:38-ChanServ(ChanServ@services.)- Channel #beagle is not registered.
  • [22:20:33] * cwillu_at_work (~cwillu@cwillu.com) Quit (Remote host closed the connection)
  • [22:21:07] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [22:21:12] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [22:22:22] * cwillu_at_work (~cwillu@cwillu.com) has joined #beagle
  • [22:25:43] * tharvey (~tharvey@adsl-76-205-222-173.dsl.snlo01.sbcglobal.net) has joined #beagle
  • [22:27:23] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Ping timeout: 248 seconds)
  • [22:28:26] * DanaG (~dana@pcp057409pcs.wireless.calpoly.edu) Quit (Read error: Operation timed out)
  • [22:31:02] * mobidev (~mobidev@94.127.205.30) Quit (Quit: I go offline...)
  • [22:33:43] * beginner (~816e055a@gateway/web/freenode/x-xxlrjhvrqyxjgjms) has left #beagle
  • [22:38:03] * ddompe (~ddompe@186.32.57.22) Quit (Quit: ddompe is leaving)
  • [22:39:23] * DanaG (~dana@pcp057409pcs.wireless.calpoly.edu) has joined #beagle
  • [22:43:17] * mrc3 (~mrc3@nat/ti/x-oezzavfamwqdsxyc) Quit (Remote host closed the connection)
  • [22:43:59] * mrc3 (~mrc3@nat/ti/x-fjynskgnitqlbrsi) has joined #beagle
  • [22:44:22] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Quit: Leaving.)
  • [22:47:39] * mrc3 (~mrc3@nat/ti/x-fjynskgnitqlbrsi) Quit (Remote host closed the connection)
  • [22:47:50] * mrc3 (~mrc3@nat/ti/x-srnuyvfyknqupncl) has joined #beagle
  • [22:48:58] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Quit: L?mnar)
  • [22:49:50] * mrc3 (~mrc3@nat/ti/x-srnuyvfyknqupncl) Quit (Remote host closed the connection)
  • [22:57:22] * BThompson (~a0193480@nat/ti/x-fvluvpgvyisovwye) Quit (Read error: Connection reset by peer)
  • [22:57:28] * guntshi (~c05e5e69@gateway/web/freenode/x-mtdzdwigtlsmdoxo) Quit (Quit: Page closed)
  • [22:59:25] * RazZziel (~raziel@63.93.117.91.dynamic.mundo-r.com) Quit (Ping timeout: 264 seconds)
  • [23:10:13] * prpplague (~danders@nat/ti/x-kvslmvrdyqupyzcg) Quit (Quit: Leaving)
  • [23:11:49] * cwillu_at_work (~cwillu@cwillu.com) Quit (Remote host closed the connection)
  • [23:12:25] * cwillu_at_work (~cwillu@cwillu.com) has joined #beagle
  • [23:12:53] * Yuvi (~yuvi@d-69-161-90-167.cpe.metrocast.net) Quit (Ping timeout: 246 seconds)
  • [23:14:42] * tomatoes7 (~fatboy-ub@76.197.13.149) Quit (Ping timeout: 276 seconds)
  • [23:17:23] * Tryum is now known as Try`0xff
  • [23:17:46] * beginner (~816e055a@gateway/web/freenode/x-oktdbuqpxshduidg) has joined #beagle
  • [23:22:49] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) has joined #beagle
  • [23:27:58] * BThompsonGR (~bernie@cpe-76-184-159-129.tx.res.rr.com) has joined #beagle
  • [23:28:38] * maqr (~maqr@httpcraft/hax) Quit (Ping timeout: 246 seconds)
  • [23:29:37] * niclas_ (~niclas@nat/ti/x-pjdeynyimhhzvuqt) Quit ()
  • [23:30:32] * maqr (~maqr@httpcraft/hax) has joined #beagle
  • [23:33:11] * likewise (~likewise@82-171-51-231.ip.telfort.nl) Quit (Quit: likewise)
  • [23:39:14] * katie_ is now known as katier
  • [23:43:44] * likewise (~likewise@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [23:44:43] * heathkid (~heathkid2@99-202-146-153.pools.spcsdns.net) has joined #beagle
  • [23:44:56] <bgamari_> f
  • [23:56:11] * noay (~29e3a536@gateway/web/freenode/x-awtowqcwaoffvvqz) has joined #beagle
  • [23:56:15] * noay (~29e3a536@gateway/web/freenode/x-awtowqcwaoffvvqz) Quit (Client Quit)
  • [23:56:23] * noway (~29e3a536@gateway/web/freenode/x-rapprrnthtacoqbr) has joined #beagle
  • [23:57:30] <noway> is there a display resolution less than 1280x720?
  • [23:57:41] * maria (~mrodrigue@186.32.57.22) Quit (Quit: Leaving.)