• [00:01:46] * likewise (n=chatzill@82-171-51-231.ip.telfort.nl) Quit ("ChatZilla 0.9.85 [Firefox 3.0.15/2009102815]")
  • [00:13:45] <infrared_> So just a regular mini A cable like the one that connects my camera will work?
  • [00:15:12] * alecrim (n=alecrim@189.2.128.130) Quit (Remote closed the connection)
  • [00:19:54] * florian (n=fuchs@Maemo/community/contributor/florian) Quit ("Verlassend")
  • [00:25:44] * DJWillis (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) Quit (Client Quit)
  • [00:57:59] <hari234> ifrared: if the miniA is a 5 pin connector., it should...if it is a 4 pin connector., i guess you should either short or force host mode by software as _av500_ suggested..
  • [01:02:02] * ThomasEgi (n=thomas@panda3d/ThomasEgi) Quit (Remote closed the connection)
  • [01:02:05] * j_ack (n=j_ack@p57A4282B.dip0.t-ipconnect.de) Quit (Remote closed the connection)
  • [01:02:58] * andersos (n=andersos@a150.ip4.netikka.fi) Quit (Read error: 104 (Connection reset by peer))
  • [01:09:08] * BThompsonGT (n=bernie@cpe-76-184-159-129.tx.res.rr.com) has joined #beagle
  • [01:22:41] * raster (n=raster@enlightenment/developer/raster) has joined #beagle
  • [01:29:04] * frank2000 (i=4894976a@gateway/web/freenode/x-vvsncelptstqfqyg) has joined #beagle
  • [01:29:09] <frank2000> Hello
  • [01:29:19] <infrared_> hari234: thanks I guess the beagle needs a better way of communicating with the host computer for board bring up.
  • [01:29:25] <infrared_> hello frank
  • [01:31:27] <frank2000> Does anyone knows if beagleboard is planning to have a board similar to OMAP-L137 that has c67x .
  • [01:34:22] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [01:36:52] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit (Client Quit)
  • [01:36:59] <Crofton|work> frank2000, http://www.hawkboard.org/
  • [01:54:33] * raster (n=raster@enlightenment/developer/raster) Quit ("Gettin' stinky!")
  • [01:57:56] * Dingo_aus (i=cbce1b9f@gateway/web/freenode/x-qfxilaxkroqnpksa) has joined #beagle
  • [01:58:08] * raster (n=raster@enlightenment/developer/raster) has joined #beagle
  • [02:06:49] * Entasis (n=Jarred@ppp121-45-85-69.lns20.adl6.internode.on.net) has joined #beagle
  • [02:13:12] * www (i=624dbac6@gateway/web/freenode/x-ozmwphfpivfeieip) Quit ("Page closed")
  • [02:24:14] * frank2000 (i=4894976a@gateway/web/freenode/x-vvsncelptstqfqyg) Quit ("Page closed")
  • [02:35:54] * raster (n=raster@enlightenment/developer/raster) Quit ("Gettin' stinky!")
  • [02:41:30] * rsalveti (n=rsalveti@190.55.142.169) Quit (Read error: 60 (Operation timed out))
  • [02:44:44] * memento_mori (n=memento_@78.144.137.222) Quit ("Leaving")
  • [02:47:05] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [02:54:37] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [03:00:17] * hari234 (n=hari@b01.nat.iastate.edu) Quit ()
  • [03:01:48] * cbrake (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) Quit (Read error: 60 (Operation timed out))
  • [03:03:53] * rsalveti (n=rsalveti@190.55.142.169) has joined #beagle
  • [03:05:35] * GrizzlyAdams (n=Grizzly@ip68-230-167-28.mc.at.cox.net) has joined #beagle
  • [03:08:55] <Dingo_aus> Can anyone inform me how to use Ubuntu on the BB now that I've just booted into it for the first time - ie how to get a window manger up
  • [03:09:24] <Dingo_aus> (I have just installed Ubuntu and have a terminal window up under X and that is about it)
  • [03:16:53] * Yuvie (n=yuvi@resnet-234-148.resnet.umbc.edu) has joined #beagle
  • [03:25:08] <rcn-ee> Dingo_aus, it depends what you want to do with it..
  • [03:27:39] <Dingo_aus> I am looking to set up a Xubuntu environment (later I wish to develop OpenCV apps natively). I got a full desktop when I executed the command "x-session-manager" which was my first concern
  • [03:28:47] <rcn-ee> Dingo_aus, then start with 'sudo apt-get install xfce4 gdm' to get xfce4 running minimally and other things as you need them..
  • [03:29:02] <spvensko> to start X try "startx"
  • [03:29:07] <spvensko> not sure if that's what you're asking for or not
  • [03:31:53] <Dingo_aus> thanks guys - yeah that is what I've after. I just have to setup the usb ethernet now
  • [03:31:57] <Dingo_aus> thanks
  • [03:32:49] <rcn-ee> Dingo_aus, "sudo ifconfig -a" then "sudo dhclient eth#" till you get a /etc/network... script wrote...
  • [03:33:58] <spvensko> Dingo_aus: how do you enjoy it so far?
  • [03:42:22] * infrared_ (i=2090ab16@gateway/web/freenode/x-hksuosqevzvapmxq) Quit (Ping timeout: 180 seconds)
  • [03:45:03] * Yuvi (n=yuvi@resnet-234-148.resnet.UMBC.EDU) Quit (Read error: 110 (Connection timed out))
  • [03:45:04] * Yuvie is now known as Yuvi
  • [03:50:02] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [03:54:13] * htns (n=htns@61.6.64.6) has joined #beagle
  • [03:58:28] * gregoiregentil (n=gregoire@61.145.203.8) has joined #beagle
  • [03:59:10] <Dingo_aus> @spevensko - I'm liking it very much. I've previously worked with the Atmel NGW100 board which is a router-based design. So the ability to output video is great
  • [03:59:23] <Dingo_aus> sorry @spvensko
  • [03:59:45] <Dingo_aus> I got the usb networking up and I'm updating from the repos now
  • [04:00:24] <spvensko> nice :)
  • [04:01:51] <Dingo_aus> what is a good commandline program to sync the clock to the right time?
  • [04:02:01] <rcn-ee> Dingo_aus, ntpdate
  • [04:02:08] <Dingo_aus> thanks
  • [04:02:42] <rcn-ee> Dingo_aus, just as you mentioned updating the repo, that reminded me i really should have that set an a recommended package on elinux.org.. ;)
  • [04:03:03] <Dingo_aus> :)
  • [04:03:22] <Dingo_aus> thanks for setting out all that info on elinux btw
  • [04:03:57] <rcn-ee> no problem
  • [04:04:01] <gregoiregentil> Has anyone managed to load an external initramfs with 2.6.29? The cpio.gz should not be inside the kernel, but separately on the first partition. I tried the following and it didn't work (at the same time, if I only change INITRAMFS_SOURCE in defconfig and compile the initramfs.cpio.gz into the kernel, it works).
  • [04:04:04] <gregoiregentil> setenv bootargs "console=ttyS2,115200n8 root=/dev/ram0 rw initrd=0x81600000 nohz=off nohz=off omapfb.vrfb=1 omapfb.mode=dvi:1024x600MR-16@60 omapdss.def_disp=dvi omapfb.vram=0:8M,1:4M"
  • [04:04:04] <gregoiregentil> setenv loadaddr 0x80300000
  • [04:04:04] <gregoiregentil> setenv bootcmd "mmcinit; mmc init; fatload mmc 0 0x80300000 uImage; fatload mmc 0 0x81600000 initramfs.cpio.gz; bootm"
  • [04:04:05] <gregoiregentil> boot
  • [04:04:46] <gregoiregentil> what could I do wrong in the command line that prevents from working externally?
  • [04:05:06] <rcn-ee> gregoiregentil, i did something like that with debian, i could only get it to work if it wasn't compressed..
  • [04:05:23] * cody_ (n=cody@dslb-084-056-071-159.pools.arcor-ip.net) has joined #beagle
  • [04:05:46] <gregoiregentil> rcn-ee: interesting. could you further elaborate? So it was just a cpio file?
  • [04:07:19] <spvensko> whoaaaa pastebin
  • [04:07:35] <rcn-ee> gregoiregentil, it was debian's "initrd.gz" which they use for net install's, i had to unzip it, and even had to pad the file.. notes are here: http://elinux.org/BeagleBoardDebian#Development_PC:_Setup_SD_U-boot_Partition
  • [04:14:39] <Dingo_aus> hmmm, when running xubuntu - would it be wise to set up a swap partition on my SD card or would that wear out the SD card?
  • [04:18:58] <rcn-ee> Dingo_aus, It'll be fine, i haven't had an SD card wear out in any of my builds yet.. (other then reformating one way too many times..) You can always switch to a usb harddrive install...
  • [04:20:21] * cody (n=cody@dslb-084-056-077-226.pools.arcor-ip.net) Quit (Connection timed out)
  • [04:20:55] * rsalveti (n=rsalveti@190.55.142.169) Quit (Remote closed the connection)
  • [04:22:41] <Dingo_aus> I think I'll plug a usb flash device into my hub to be the swap file - finally a use for all of those promotional usb drives I have lying around ;)
  • [04:23:55] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [04:25:00] * fischer (n=fischer1@fischerfamily.org) Quit (Read error: 110 (Connection timed out))
  • [04:25:20] * fischer (n=fischer1@fischerfamily.org) has joined #beagle
  • [04:29:34] * rcn-ee (n=voodoo@thief-pool1-30.mncable.net) Quit ("Leaving")
  • [04:30:03] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [04:36:11] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit ("Up and at 'em, Atom Ant!")
  • [04:41:12] * alecrim (n=alecrim@201008196090.user.veloxzone.com.br) has joined #beagle
  • [05:22:08] * snowman (n=snowman@c-75-66-187-145.hsd1.tn.comcast.net) has joined #beagle
  • [05:45:50] * j_ack (n=j_ack@p57A40095.dip0.t-ipconnect.de) has joined #beagle
  • [05:46:06] * j_ack (n=j_ack@p57A40095.dip0.t-ipconnect.de) Quit (Read error: 104 (Connection reset by peer))
  • [05:46:43] * Belna (n=Thomas@ppp-93-104-137-105.dynamic.mnet-online.de) has joined #beagle
  • [05:48:39] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [05:52:31] * virals (n=viral@122.181.150.106) has joined #beagle
  • [05:52:51] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Client Quit)
  • [05:59:26] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [06:01:03] <GrizzlyAdams> http://picasaweb.google.com/grizzlytwi/BeagleBox# <- fun stuff
  • [06:04:06] <GrizzlyAdams> runs off a 5v 11w wall wart, has 2.5" notebook drive (in a usb adapter), 4 port usb hub (ports replaced with headers), 25 pin serial port, beagle board, usb ethernet
  • [06:04:42] <GrizzlyAdams> when i'm done and have a metal backplate made tomorrow it will be finished
  • [06:06:31] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [06:08:02] * alecrim (n=alecrim@201008196090.user.veloxzone.com.br) Quit (Read error: 104 (Connection reset by peer))
  • [06:35:48] * virals1 (n=viral@122.181.150.106) has joined #beagle
  • [06:37:26] * virals (n=viral@122.181.150.106) Quit (Read error: 104 (Connection reset by peer))
  • [06:51:45] * virals1 (n=viral@122.181.150.106) Quit ("Leaving.")
  • [06:54:15] * GrizzlyAdams (n=Grizzly@ip68-230-167-28.mc.at.cox.net) Quit (Read error: 104 (Connection reset by peer))
  • [06:58:09] * soman (n=somnath@118.102.130.6) has joined #beagle
  • [07:06:59] * dirk2 (n=dirk@p5B040394.dip0.t-ipconnect.de) has joined #beagle
  • [07:12:01] * Dingo_aus (i=cbce1b9f@gateway/web/freenode/x-qfxilaxkroqnpksa) Quit ("Page closed")
  • [07:25:19] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [07:35:55] * gregoiregentil (n=gregoire@61.145.203.8) Quit (Read error: 110 (Connection timed out))
  • [07:43:41] * Septalici (n=bakljg@c-98-240-226-129.hsd1.mn.comcast.net) Quit (Read error: 110 (Connection timed out))
  • [07:46:33] * BThompsonGT (n=bernie@cpe-76-184-159-129.tx.res.rr.com) Quit (Read error: 104 (Connection reset by peer))
  • [07:47:25] * bazbell (n=bazbell@nat/ti/x-ixworeiwddrrwnlu) has joined #beagle
  • [07:56:48] * Entasis (n=Jarred@ppp121-45-85-69.lns20.adl6.internode.on.net) Quit ("Leaving")
  • [08:15:01] * killring (n=killring@adsl-99-130-64-242.dsl.sfldmi.sbcglobal.net) Quit ()
  • [08:29:45] * rkirti (n=oespirit@203.199.213.3) has joined #beagle
  • [08:36:24] * Meizirkki (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) has joined #beagle
  • [08:47:57] * Ceriand|desktop (n=Ceriand@unaffiliated/ceriand) Quit (Read error: 104 (Connection reset by peer))
  • [08:51:49] * Ceriand|desktop (n=Ceriand@unaffiliated/ceriand) has joined #beagle
  • [09:06:58] * dirk2 (n=dirk@p5B040394.dip0.t-ipconnect.de) Quit (Remote closed the connection)
  • [09:12:26] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit (Read error: 110 (Connection timed out))
  • [09:12:32] * ant__ (n=andrea@host93-250-dynamic.2-87-r.retail.telecomitalia.it) Quit ("Leaving")
  • [09:19:53] * tomba (n=tomba@a88-114-152-102.elisa-laajakaista.fi) has joined #beagle
  • [09:33:31] * spvensko (n=spvensko@12.94.226.158) Quit ()
  • [09:35:29] * Ceriand|desktop (n=Ceriand@unaffiliated/ceriand) Quit ("Leaving.")
  • [09:38:59] * tomba (n=tomba@a88-114-152-102.elisa-laajakaista.fi) Quit (calvino.freenode.net irc.freenode.net)
  • [10:00:17] * madi (i=7aaf5260@gateway/web/freenode/x-bormhojpcaanwfba) has joined #beagle
  • [10:01:59] * madi (i=7aaf5260@gateway/web/freenode/x-bormhojpcaanwfba) Quit (Client Quit)
  • [10:23:22] * shenki (n=joel@202.174.42.5) Quit (Read error: 104 (Connection reset by peer))
  • [10:27:38] * Belna_ (n=Thomas@ppp-93-104-158-252.dynamic.mnet-online.de) has joined #beagle
  • [10:30:58] * Belna (n=Thomas@ppp-93-104-137-105.dynamic.mnet-online.de) Quit (Read error: 60 (Operation timed out))
  • [10:31:46] * cbrake (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) has joined #beagle
  • [10:36:08] <mru> morning
  • [10:36:33] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [10:38:51] <_av500_> morning
  • [10:39:43] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit (Client Quit)
  • [10:43:35] * rkirti (n=oespirit@203.199.213.3) Quit (Read error: 60 (Operation timed out))
  • [10:43:47] * rkirti (n=oespirit@203.199.213.3) has joined #beagle
  • [10:48:32] * cody (n=cody@dslb-084-056-093-197.pools.arcor-ip.net) has joined #beagle
  • [10:49:05] * Christos_N (n=Christos@ppp-94-66-115-12.home.otenet.gr) has joined #beagle
  • [10:49:40] * Acedip (n=ani@fedora/Acedip) has joined #beagle
  • [10:55:13] * andersos (n=andersos@a150.ip4.netikka.fi) has joined #beagle
  • [11:01:43] * cody_ (n=cody@dslb-084-056-071-159.pools.arcor-ip.net) Quit (Read error: 110 (Connection timed out))
  • [11:03:04] * Acedip (n=ani@fedora/Acedip) Quit (Read error: 60 (Operation timed out))
  • [11:12:12] * eFfeM (n=frans@j192117.upc-j.chello.nl) has joined #beagle
  • [11:14:44] <topi_> mru: have you done any benchmarking on whether there's any perf difference anywhere if you compile everything as armv7 instead of arm4 that the current debian eabi binaries are being compiled in?
  • [11:18:25] * Acedip (n=ani@fedora/Acedip) has joined #beagle
  • [11:19:19] <mru> topi_: building for armv7 will certainly give faster code than armv4
  • [11:23:52] * andrevs is now known as AndrevS
  • [11:25:22] * DJWillis (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) has joined #beagle
  • [11:35:28] * shenki (n=joel@202.174.42.5) has joined #beagle
  • [11:37:08] * agnel (n=joel@122.172.38.24) has joined #beagle
  • [11:39:41] <agnel> Hi, I have a question, can I use USB for initial interaction with the beagleboard?
  • [11:40:24] <agnel> instead of serial?
  • [11:41:06] * Christos_N_ (n=Christos@ppp-94-66-57-109.home.otenet.gr) has joined #beagle
  • [11:41:22] * Christos_N_ (n=Christos@ppp-94-66-57-109.home.otenet.gr) Quit (Client Quit)
  • [11:42:27] * andersos (n=andersos@a150.ip4.netikka.fi) Quit (Remote closed the connection)
  • [11:45:00] <agnel> my bad, stupid question.
  • [11:46:20] * Christos_N (n=Christos@ppp-94-66-115-12.home.otenet.gr) Quit (Read error: 60 (Operation timed out))
  • [11:52:04] * Ceriand|work (n=Ceriand@unaffiliated/ceriand) Quit (Remote closed the connection)
  • [11:52:54] * Acedip (n=ani@fedora/Acedip) Quit (Read error: 110 (Connection timed out))
  • [11:53:44] * Ceriand|work (n=Ceriand@unaffiliated/ceriand) has joined #beagle
  • [12:10:34] * naeg (n=naeg@194.208.239.170) has joined #beagle
  • [12:15:39] * ThomasEgi (n=thomas@panda3d/ThomasEgi) has joined #beagle
  • [12:17:50] * snowman (n=snowman@c-75-66-187-145.hsd1.tn.comcast.net) Quit ("Leaving")
  • [12:20:54] * eFfeM (n=frans@j192117.upc-j.chello.nl) Quit ("Leaving.")
  • [12:43:06] * Meizirkki (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) Quit (Read error: 110 (Connection timed out))
  • [12:43:14] * Meizirkki_ (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) has joined #beagle
  • [12:43:51] * tomba (n=tomba@a88-114-152-102.elisa-laajakaista.fi) has joined #beagle
  • [12:46:45] * naeg (n=naeg@194.208.239.170) Quit ("WeeChat 0.3.0")
  • [12:53:52] <topi_> has anyone here ordered the Touch Book from AI? it's a smartbook design based on the beagle.
  • [12:56:03] <mru> some people here have them
  • [12:56:47] <topi_> cool. I wonder if the kernel in TB is able to fully go to retention mode?
  • [12:56:47] * soman (n=somnath@118.102.130.6) Quit (Read error: 104 (Connection reset by peer))
  • [12:57:10] <topi_> otherwise, they'd have lots of trouble even to achieve the battery effiency of the N900
  • [12:58:03] <mru> sorry, I don't know details
  • [12:58:24] <mru> koen might know
  • [12:58:39] <mru> and gregoire of course, he comes on here sometimes
  • [12:59:16] * uski (n=uski@nor75-27-88-178-184-116.fbx.proxad.net) has joined #beagle
  • [12:59:25] <topi_> maybe gregoire doesn't have the time, since everyone must be bombarding him with questions about their units shipping, like me :)
  • [13:00:08] <topi_> did anyone notice that there's a backlog of Beagle Boards as well? at least 2 weeks ago when I checked Digikey's website. Might these two events be somehow related? :)
  • [13:00:21] <mru> no
  • [13:00:29] <mru> and digikey status on the webpage is always wrong
  • [13:00:34] <topi_> really?
  • [13:00:50] <mru> they always quote a lead time of 15-20 weeks
  • [13:00:59] <topi_> darn... I only ordered a Gumstix Overo because I feared they couldn't ship the BB to me before Christmas
  • [13:01:02] <mru> when in fact it's usually 1-2 weeks
  • [13:01:28] <topi_> well, there's one advantage in the Overo Air I got. It has on-board 802.11g and bluetooth...
  • [13:01:49] <mru> it's a deficiency in digikey's computer system
  • [13:02:12] <topi_> are there other suppliers of Beagles than Digikey?
  • [13:02:16] <mru> they order a few k boards at a time from circuitco
  • [13:02:29] <mru> which are then delievered a few hundred per week
  • [13:02:47] <mru> their system doesn't flag the order as delievered until _all_ of the boards have been received
  • [13:02:52] <topi_> right.
  • [13:03:02] <mru> but they are still able to ship out to customers as soon as boards arrive
  • [13:03:12] <mru> there are other suppliers too
  • [13:03:22] <mru> I know mouser sells them
  • [13:03:28] <mru> maybe others too
  • [13:03:28] <uski> does anyone know what are the differences between rev C3 and rev C4? I heard it's the CPU speed, any other difference?
  • [13:03:41] <mru> then there's the EBV beagle
  • [13:03:48] <mru> same board, different manufacturer
  • [13:04:00] <uski> topi_, I heard IDA systems in India has some beagle in stock
  • [13:04:30] <mru> if you're in the US digikey or mouser are bound to be cheaper and probably no slower
  • [13:04:39] <topi_> currently I'm working with the Gumstix board but if I'm ever going to produce lots of these, I'd look at the Beagle if that woudl be a cheaper way
  • [13:05:02] <uski> topi_, gumstix really sucks if you want to use it industrially
  • [13:05:12] <mru> why is that?
  • [13:05:14] <uski> they publish product change notices and apply the changes immediatly
  • [13:05:30] <uski> they change connectors location, change layout without any advance warning
  • [13:05:39] <mru> ah, that could be a problem
  • [13:05:55] <uski> it's good if you're a hobbyist but if you designed and ordered say 500 molded plastic boxes... you'd be in big trouble
  • [13:06:25] * Meizirkki_ (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) Quit (Read error: 110 (Connection timed out))
  • [13:06:33] * Meizirkki__ (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) has joined #beagle
  • [13:06:46] <uski> http://www.gumstix.net/Hardware/view/Revision-notices/2009-Revision-Notices/112.html
  • [13:06:51] <uski> see PCN 2009-7
  • [13:06:52] <topi_> I'm not industrial guy. I intend to produce a few of my designs to other interested sailors.
  • [13:07:09] <uski> Notification Date: November 27, 2009, Effective Date: November 27, 2009 <<< that is pure joke
  • [13:07:12] <topi_> I'm basically building a "on-board computer" for sailing yachts for 1/10th of the price of the Raymarines
  • [13:07:32] <uski> ok
  • [13:07:39] <uski> should be good enough for you then :)
  • [13:08:25] <uski> i heard the next batch of beagleboard will be 720MHz
  • [13:08:38] <uski> i would have hoped they added an ethernet connector...
  • [13:08:45] <mru> that won't happen
  • [13:08:48] <uski> why?
  • [13:08:51] <mru> the omap3530 doesn't have ethernet
  • [13:09:06] <uski> yea, but why don't they provide access to the expansion bus of the CPU then
  • [13:09:11] <mru> they do
  • [13:09:13] <uski> hmm
  • [13:09:18] <topi_> there's an ethernet IF on my Tobi board for the Overo
  • [13:09:24] <uski> the addresses and data lines?
  • [13:09:38] <uski> topi_, yea i know but the gumstix solution is quite expensive when compared to the beagleboard
  • [13:09:51] <topi_> the SMSC ethernet chip is really small, but the ethernet connector takes up lots of space
  • [13:10:43] <cody> http://igep-platform.com/shop/index.php?main_page=product_info&cPath=1&products_id=23
  • [13:10:49] <cody> somebody tried this?
  • [13:11:37] <uski> well given the size of the gumstix overo boards, im pretty sure the guys who make the beagleboard could manage to put an ethernet connector without making the beagleboard bigger
  • [13:11:44] <uski> (but maybe they don't want to add layers in the pcb to cut costs)
  • [13:11:51] <mru> uski: ethernet would need extra chips
  • [13:12:14] <uski> mru: well, just an ethernet controller (such as the one used by gumstix, it's a small qfn chip) and a connector with integrated magnetics
  • [13:12:28] <uski> i believe the biggest problem with ethernet is the extra signals required
  • [13:12:57] <mru> it still adds cost
  • [13:14:55] <uski> yes
  • [13:14:57] <uski> i agree
  • [13:15:21] <uski> im not saying the beagleboard is bad as-is, but each time i talked about the beagleboard to anyone, the complained about the lack of ethernet
  • [13:15:39] <uski> and reading the schematics in the http://beagleboard.org/static/BBSRM_latest.pdf file, it appears the data/addr bus is not exported onto a connector
  • [13:15:49] <uski> so this means the only way to add ethernet is by using a usb/ethernet converter
  • [13:15:56] <uski> and this also adds cost, probably more to the end user
  • [13:16:12] <mru> or use ethernet gadget mode
  • [13:16:14] <mru> costs nothing
  • [13:16:52] <uski> well im thinking about adding a ENC28J10 SPI to ethernet converter on the SPI bus
  • [13:17:05] <uski> the code to do so already exists
  • [13:17:18] <mru> look at the zippy expansion board
  • [13:17:21] <uski> yea
  • [13:17:22] <uski> that's the idea
  • [13:17:43] <topi_> my Beagle is connected directly to a 100/1000 ethernet switch
  • [13:18:02] <topi_> so i'd be glad to have the Ethernet directly on Beagle instead of going through a usb-ethernet brick
  • [13:18:25] <topi_> the ethernet gadget doesn't really connect with the ethernet switch...
  • [13:18:32] <mru> no...
  • [13:19:04] <topi_> ppl still use ethernet, and for a good reason! it's way more reliable than any 802.11
  • [13:19:21] <mru> the omap3 is meant for phones
  • [13:19:25] <mru> they don't usually have ethernet
  • [13:19:39] <cody> whats the problem with usb ethernet?
  • [13:20:05] <uski> cody: cost, more wires, bigger
  • [13:21:02] <mru> and nobody likes usb
  • [13:26:25] <topi_> also, more power consumption since you have to have the usb powered and also the eth powered
  • [13:26:53] <topi_> I wonder what kind of solution they used for the Touch Book, which does have an ethernet jack.
  • [13:27:18] <cody> the board from the link i posted has ethernet
  • [13:28:12] <uski> cody: nice link
  • [13:28:41] <uski> it even has wifi
  • [13:30:27] <uski> i might buy one, as the beagleboard is out of stock
  • [13:30:36] <uski> at least until january 15th from what i heard
  • [13:31:08] <topi_> what nick does gregoire use, in case he *does* show up here?
  • [13:32:59] <mru> gregoiregentil
  • [13:33:12] <mru> you just missed him in fact
  • [13:33:24] <topi_> damn
  • [13:34:27] <topi_> bloody hell, this angstrom that ships on the gumstix nand is useful and all, but why didn't they include lszrz ??? how am I supposed to upload stuff there now?
  • [13:34:50] * rbelem (n=rodrigo@pdpc/supporter/professional/rbelem) Quit ("Leaving")
  • [13:39:21] * ant__ (n=andrea@host93-250-dynamic.2-87-r.retail.telecomitalia.it) has joined #beagle
  • [13:39:34] <uski> topi: i don't know what lszrz is, but i used netcat (nc) to send files
  • [13:39:51] <uski> so you can crosscompile lszrz and send it that way
  • [13:40:01] <uski> im going to order one of these IGEPv2 board
  • [13:40:14] * Entasis (n=Jarred@ppp121-45-85-69.lns20.adl6.internode.on.net) has joined #beagle
  • [13:40:35] <uski> it has more ram and more flash than the beagle too
  • [13:40:51] <Entasis> who does?
  • [13:41:18] * Belna_ (n=Thomas@ppp-93-104-158-252.dynamic.mnet-online.de) Quit ("Leaving")
  • [13:42:16] <topi_> uski, if you only have console, and no net conn, you need zmodem
  • [13:42:48] <uski> Entasis, the IGEPv2 (more ram and more flash, if that was ur question)
  • [13:43:18] <Entasis> ah
  • [13:43:22] <uski> it might be a bit more expensive than the beagle but at least it's in stock, it has the 720mhz cpu, ethernet, more connectors, and more memory
  • [13:43:30] <uski> and wifi and bluetooth
  • [13:44:14] <Entasis> its name isn't as good though :p
  • [13:44:30] * ant__ (n=andrea@host93-250-dynamic.2-87-r.retail.telecomitalia.it) Quit ("Leaving")
  • [13:48:00] <uski> Entasis: maybe, but i ordered one
  • [13:48:10] <uski> :)
  • [13:51:56] <uski> lol i got order number ~150, looks like they didn't ship a lot of these
  • [13:53:05] <cody> i think i will buy one too
  • [13:53:20] <cody> because my beagleboards usb is unstable
  • [13:53:31] <cody> hope it works on the igep
  • [14:05:43] * djlewis (n=djlewis@75.15.64.146) has joined #beagle
  • [14:20:10] <djlewis> gm mru
  • [14:20:10] <mru> morning djlewis
  • [14:20:24] <djlewis> 24F here and frosty.
  • [14:20:55] <mru> 10C here
  • [14:20:59] <mru> and not quite raining
  • [14:22:35] <djlewis> oh, nice. so thats -4.4C here, argh
  • [14:23:32] <uski> cody: what do you mean by unstable? having a stable usb is essential for my application
  • [14:26:09] <cody> yes the beagleboard c3 doesnt really work with usb devices
  • [14:26:18] <mru> stable usb is a contradiction in terms
  • [14:26:24] <djlewis> does so, just not reliably ;)
  • [14:26:52] <cody> well, the usb port on my laptop is stable
  • [14:27:01] <cody> so stable usb is possible
  • [14:27:18] <mru> no, you simply haven't plugged any evil devices into it
  • [14:27:27] <cody> yeah of course
  • [14:27:29] <djlewis> seems ok until I webcam mine.
  • [14:27:41] <cody> but i havent plugged evil devices on my beagle too
  • [14:27:45] <cody> and it doesnt work
  • [14:28:23] <djlewis> I have kybd, mouse, wifi and webcam on my BB.
  • [14:28:39] <mru> beagle C3 has some power issues with usb iirc
  • [14:28:42] <cody> which beagle?
  • [14:28:49] <cody> yes
  • [14:28:53] <djlewis> I have watched movies from hard drive through usb.
  • [14:29:13] <mru> I'd personally never use usb for anything remotely critical
  • [14:29:17] * djlewis uses revC2
  • [14:31:32] * vindolin (n=vindolin@tmo-109-248.customers.d1-online.com) has joined #beagle
  • [14:31:34] <djlewis> std ntsc mpeg movies that is.
  • [14:34:19] * Gaston_wrk (n=Miranda@c-012fe353.155-1-64736c11.cust.bredbandsbolaget.se) Quit (Read error: 104 (Connection reset by peer))
  • [14:37:17] * j_ack (n=j_ack@p57A42213.dip0.t-ipconnect.de) has joined #beagle
  • [14:38:53] * GPSFan (n=kenm@64.92.145.112) has joined #beagle
  • [14:41:07] * uski (n=uski@nor75-27-88-178-184-116.fbx.proxad.net) Quit (Remote closed the connection)
  • [14:50:28] * AndChat- (n=vindolin@tmo-109-248.customers.d1-online.com) has joined #beagle
  • [14:50:30] * vindolin (n=vindolin@tmo-109-248.customers.d1-online.com) Quit (Read error: 104 (Connection reset by peer))
  • [14:50:54] * AndChat- is now known as vindolin
  • [14:52:14] * apo_ (n=apo@pD9E7F0F2.dip.t-dialin.net) has joined #beagle
  • [14:57:14] * Gaston|Home (n=Miranda@c-012fe353.155-1-64736c11.cust.bredbandsbolaget.se) has joined #beagle
  • [15:06:18] * brolin (n=brolin@nat212.udea.edu.co) has joined #beagle
  • [15:08:18] * apo (n=apo@pD9E7D603.dip.t-dialin.net) Quit (Read error: 110 (Connection timed out))
  • [15:12:21] * parapete (n=pete@host86-130-27-0.range86-130.btcentralplus.com) has joined #beagle
  • [15:27:51] * Entasis (n=Jarred@ppp121-45-85-69.lns20.adl6.internode.on.net) Quit ("Leaving")
  • [15:28:07] * rcn-ee (n=voodoo@thief-pool1-30.mncable.net) has joined #beagle
  • [15:28:46] * j_ack (n=j_ack@p57A42213.dip0.t-ipconnect.de) Quit ("Verlassend")
  • [15:29:16] * AndChat| (n=vindolin@tmo-098-209.customers.d1-online.com) has joined #beagle
  • [15:29:58] * Yuvi (n=yuvi@resnet-234-148.resnet.umbc.edu) Quit ()
  • [15:30:07] * Yuvi (n=yuvi@resnet-234-148.resnet.umbc.edu) has joined #beagle
  • [15:39:19] * adj (i=antti@hervanta.com) Quit ("S??t?.")
  • [15:42:29] * infrared_ (i=2097e695@gateway/web/freenode/x-foqvhhotpjyrqtbc) has joined #beagle
  • [15:42:35] <infrared_> hi all
  • [15:43:52] * AndChat- (n=vindolin@tmo-101-41.customers.d1-online.com) has joined #beagle
  • [15:44:06] <infrared_> What is the differance between using the OTG port with a hub attached and using the standard USB port with a hub attached on the beagle? I see this has brought much confusion to beginners in the community...
  • [15:44:42] * rbelem (n=rodrigo@pdpc/supporter/professional/rbelem) has joined #beagle
  • [15:47:06] <rcn-ee> infrared_, nothing, other then a few C2/3 boards had issues with the ehci port under heavy load, which has been resolved..
  • [15:48:00] * pfoetchen (n=pfoetche@dslb-188-098-014-101.pools.arcor-ip.net) has joined #beagle
  • [15:48:49] * rbelem (n=rodrigo@pdpc/supporter/professional/rbelem) has left #beagle
  • [15:49:33] <infrared_> rcn-ee: thanks. so this is just a board revision issue that is causing the confusion?
  • [15:51:36] * vindolin (n=vindolin@tmo-109-248.customers.d1-online.com) Quit (Read error: 110 (Connection timed out))
  • [15:52:12] <rcn-ee> infrared_, no i wouldn't call it confusion..
  • [15:55:04] <infrared_> alot of How to's that I have read seem to believe the only way to connect usb perphials is to go through the OTG port but I see that early boards did not populate the standard A connector on the board
  • [15:55:54] <mru> yes, the ehci port wasn't working on rev B boards
  • [15:56:01] <mru> so the connector wasn't mounted
  • [15:56:12] <rcn-ee> infrared_, which howto's? ;) That is correct for over a year, you could only purchase boards with an otg connector..
  • [15:56:23] * Gaston|Home (n=Miranda@c-012fe353.155-1-64736c11.cust.bredbandsbolaget.se) Quit (Read error: 104 (Connection reset by peer))
  • [15:56:53] <infrared_> is there a way to keep terminal through USB after I issue the boot command?
  • [15:57:42] <mru> you can configure linux as serial gadget
  • [15:57:54] <mru> you'll probably see a brief disconnect on the pc though
  • [15:57:58] * andersos (n=andersos@a150.ip4.netikka.fi) has joined #beagle
  • [15:58:10] <mru> minicom won't like that
  • [15:58:22] <infrared_> Hyperterm doesnt either
  • [15:59:26] <infrared_> cable clutter sucks lol
  • [16:00:26] <rcn-ee> mru, i know you tested thumb2 on the beagle with gcc, did you ever write up your findings on your blog?
  • [16:01:04] <mru> there's an old post about thumb2 with armcc
  • [16:05:50] * AndChat| (n=vindolin@tmo-098-209.customers.d1-online.com) Quit (Read error: 110 (Connection timed out))
  • [16:07:08] * crwper (n=crwper@d66-222-249-40.abhsia.telus.net) has joined #beagle
  • [16:11:17] <infrared_> thanks rcn-ee, mru... My next hurdle is keyboard and mouse. Im gonna jump back on that after I set up serial gadget and tinker with minicom.
  • [16:17:35] * bazbell (n=bazbell@nat/ti/x-ixworeiwddrrwnlu) Quit (Remote closed the connection)
  • [16:17:55] * bazbell (n=bazbell@nat/ti/x-epeyqehlihfvvnbq) has joined #beagle
  • [16:18:43] * cody (n=cody@dslb-084-056-093-197.pools.arcor-ip.net) Quit ("leaving")
  • [16:18:54] * j_ack (n=j_ack@p57A42213.dip0.t-ipconnect.de) has joined #beagle
  • [16:21:54] * spvensko (n=spvensko@12.94.226.158) has joined #beagle
  • [16:23:23] * infrared_ (i=2097e695@gateway/web/freenode/x-foqvhhotpjyrqtbc) Quit ("Page closed")
  • [16:24:03] * killring (n=killring@adsl-99-130-64-242.dsl.sfldmi.sbcglobal.net) has joined #beagle
  • [16:25:35] * cody (n=cody@dslb-084-056-093-197.pools.arcor-ip.net) has joined #beagle
  • [16:30:59] * pfoetchen (n=pfoetche@dslb-188-098-014-101.pools.arcor-ip.net) Quit ("Lost terminal")
  • [16:36:38] <topi_> what's the "right way" to install ipk packages?
  • [16:36:45] <topi_> i come from a debian background.
  • [16:39:31] <DJWillis> topi_: 'opkg install path-to-package.ipk' or get it from the feeds if you have network access.
  • [16:39:45] <topi_> I just set up eth0 so I do have network :)
  • [16:40:09] <topi_> thanks! it seems to work
  • [16:40:17] <topi_> * ERROR: Cannot satisfy the following dependencies for perl:
  • [16:40:25] <topi_> doesn't seem to resolve dependencies like apt-get :)
  • [16:41:01] <DJWillis> topi_: 'opkg install package' then ;-), opkg is analogous with dpkg. It should resolve deps.
  • [16:41:23] <topi_> aha
  • [16:41:39] <topi_> yay! i have perl now! thanks
  • [16:45:50] * Analias (n=analias@c-68-35-8-162.hsd1.nm.comcast.net) Quit ("Leaving.")
  • [16:45:54] * BThompsonGT (n=bernie@cpe-76-184-159-129.tx.res.rr.com) has joined #beagle
  • [16:48:00] * AndChat- (n=vindolin@tmo-101-41.customers.d1-online.com) Quit (Read error: 104 (Connection reset by peer))
  • [16:48:28] * Analias (n=analias@c-68-35-8-162.hsd1.nm.comcast.net) has joined #beagle
  • [16:50:07] <Crofton> mru, do you have an opinion on liboil?
  • [16:51:26] * adj (i=antti@hervanta.com) has joined #beagle
  • [16:52:06] <mru> snake oil
  • [16:52:24] <Crofton|work> heh
  • [16:52:33] <Crofton|work> I need to take a look at it
  • [16:52:51] <mru> it may be good enough for a fallback when handcrafted asm isn't available
  • [16:52:53] <Crofton|work> see if the end result is better/worse than current gnuradio code
  • [16:53:00] <Crofton|work> that is what I am thinking
  • [16:53:37] <mru> I saw some benchmarks somewhere that suggested its performance was a bit temperamental
  • [16:53:40] <mru> so test carefully
  • [16:54:41] * vindolin (n=vindolin@tmo-101-41.customers.d1-online.com) has joined #beagle
  • [16:56:29] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [17:18:58] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Read error: 104 (Connection reset by peer))
  • [17:20:56] * kulve (i=b8d1c782@81.22.249.143) Quit (Remote closed the connection)
  • [17:22:28] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [17:22:28] * Christos_N (n=Christos@ppp-94-66-64-14.home.otenet.gr) has joined #beagle
  • [17:24:34] * felipec (n=felipec@a91-153-253-80.elisa-laajakaista.fi) has joined #beagle
  • [17:34:20] * eFfeM (n=frans@j192117.upc-j.chello.nl) has joined #beagle
  • [17:37:17] * kulve (i=0b1ee8c5@humboldt.pingu.fi) has joined #beagle
  • [17:46:03] <_av500_> wasnt there a successor to liboil?
  • [17:46:48] <janneg> libfusion?
  • [17:46:52] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Read error: 54 (Connection reset by peer))
  • [17:46:59] <janneg> *scnr*
  • [17:51:26] * alcy (i=3bb4250c@gateway/web/freenode/x-otukujlqjwkuiecq) has joined #beagle
  • [17:51:43] * rkirti (n=oespirit@203.199.213.3) Quit (Read error: 113 (No route to host))
  • [17:53:39] * j_ack (n=j_ack@p57A42213.dip0.t-ipconnect.de) Quit ("Verlassend")
  • [17:54:19] * el_chapo (i=5f1ba579@gateway/web/freenode/x-ykmoqggegmwdctwd) has joined #beagle
  • [17:54:57] <el_chapo> hello everyone :)
  • [17:57:26] <el_chapo> I'm looki ng for the help with libsdl-mixer_1.2.11
  • [17:57:37] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [17:58:14] * el_chapo (i=5f1ba579@gateway/web/freenode/x-ykmoqggegmwdctwd) Quit (Client Quit)
  • [18:04:23] * rkirti (n=oespirit@203.199.213.3) has joined #beagle
  • [18:04:23] * rkirti (n=oespirit@203.199.213.3) Quit (Remote closed the connection)
  • [18:04:34] * rkirti (n=oespirit@203.199.213.3) has joined #beagle
  • [18:05:12] * Meizirkki__ is now known as Meizirkki
  • [18:08:49] * alcy (i=3bb4250c@gateway/web/freenode/x-otukujlqjwkuiecq) Quit ("Page closed")
  • [18:10:54] * GPSFan (n=kenm@64.92.145.112) Quit ("Ex-Chat")
  • [18:11:01] <eFfeM> anyone who can help me with the new staging? It does not stage a file that I need, but no idea how to add it (if I make a do_stage the default beahviour does not take place and if I do an _append it complains that there is no do_stage)
  • [18:13:18] * montamer (n=montamer@203.199.213.3) has joined #beagle
  • [18:22:23] * j_ack (n=j_ack@p57A42213.dip0.t-ipconnect.de) has joined #beagle
  • [18:22:58] * agnel (n=joel@122.172.38.24) Quit (Read error: 110 (Connection timed out))
  • [18:29:35] * j_ack (n=j_ack@p57A42213.dip0.t-ipconnect.de) Quit (Remote closed the connection)
  • [18:31:42] * Satish (i=75c0f195@gateway/web/freenode/x-wasbbabzeevxandx) has joined #beagle
  • [18:32:00] * Satish (i=75c0f195@gateway/web/freenode/x-wasbbabzeevxandx) Quit (Client Quit)
  • [18:32:21] * j_ack (n=j_ack@p57A42213.dip0.t-ipconnect.de) has joined #beagle
  • [18:37:42] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [18:42:10] * robclark (n=robclark@nat/ti/x-zfsbatmdjvpoyoxg) has joined #beagle
  • [18:48:09] * vindolin (n=vindolin@tmo-101-41.customers.d1-online.com) Quit (Read error: 104 (Connection reset by peer))
  • [18:48:24] * vindolin (n=vindolin@tmo-101-41.customers.d1-online.com) has joined #beagle
  • [19:05:18] * akshat (i=7aa3dd25@gateway/web/freenode/x-eaepltsqngwpeynh) has joined #beagle
  • [19:05:31] <akshat> hi
  • [19:06:44] * GPSFan (n=kenm@64.92.145.112) has joined #beagle
  • [19:07:11] * mrc3 (n=ddiaz@189.157.113.233) Quit (Read error: 110 (Connection timed out))
  • [19:07:23] * vindolin (n=vindolin@tmo-101-41.customers.d1-online.com) Quit (Read error: 104 (Connection reset by peer))
  • [19:07:28] * vindolin (n=vindolin@tmo-101-41.customers.d1-online.com) has joined #beagle
  • [19:08:09] <akshat> somebody sugested using the FTDI ttl-232r device for communicating with the beagle (http://groups.google.com/group/beagleboard/browse_thread/thread/60d79985a34047f5) but how is it possible for a TTL device to work with the RS232 levels?
  • [19:09:04] <akshat> the logic high in RS232 s a negative voltage, how can the TTL device understand it?
  • [19:09:13] <akshat> *is
  • [19:15:06] <akshat> hello?
  • [19:17:20] <rcn-ee> akshat, that's an old thread, he never actually said he used it, it would depend on the ftdi ttl-232r to also supports rs232 levels..
  • [19:21:34] * mru is now known as _troll_
  • [19:24:12] <akshat> rcn-ee: ok, but from what I know the ttl-232r is only ttl no rs232 level
  • [19:24:50] <akshat> rcn-ee: have you tried usb tty?
  • [19:25:35] <rcn-ee> akshat, that email was bad advice... nope, i'm using old serial idc connectors...
  • [19:26:00] <akshat> ok
  • [19:26:24] <akshat> rcn-ee: any inforation on how I can use usbtty?
  • [19:26:31] <akshat> *information :)
  • [19:27:03] <rcn-ee> akshat, check the elinux wiki, my musb/otg port is always conected to an external usb drive..
  • [19:27:50] <akshat> rcn-ee: ok. Thanks :)
  • [19:31:53] <Christos_N> Hi guys, did anyone payed attention on audio channels eg L-R swaping in BB?
  • [19:38:14] * andersos (n=andersos@a150.ip4.netikka.fi) Quit (Remote closed the connection)
  • [19:41:42] * _troll_ is now known as mru
  • [19:46:59] * akshat (i=7aa3dd25@gateway/web/freenode/x-eaepltsqngwpeynh) has left #beagle
  • [19:55:01] * al_ (i=83b2d22f@gateway/web/freenode/x-rtyeaiuuyagetjgd) has joined #beagle
  • [19:57:11] <al_> hi
  • [19:57:37] <al_> i want to know if any body can help me
  • [19:58:00] <al_> i can't get webcam works with beagleboard
  • [19:59:33] * al_ (i=83b2d22f@gateway/web/freenode/x-rtyeaiuuyagetjgd) Quit (Client Quit)
  • [20:18:54] * guillaum1 (n=gl@AMontsouris-153-1-19-42.w86-212.abo.wanadoo.fr) Quit (Read error: 60 (Operation timed out))
  • [20:26:22] * lynx (i=4bb938fc@gateway/web/freenode/x-jmelpyethzexuksz) has joined #beagle
  • [20:26:34] <lynx> ok
  • [20:26:50] * lynx is now known as Guest87786
  • [20:27:49] <Guest87786> i have been looking and unfortunatly because of a certain linux journal, i can't seem to find any beagle boards left
  • [20:28:24] <Guest87786> does anyone have any suggestions
  • [20:29:49] * Guest87786 (i=4bb938fc@gateway/web/freenode/x-jmelpyethzexuksz) Quit (Client Quit)
  • [20:30:28] * lynx_ (i=4bb938fc@gateway/web/freenode/x-ulzwyrizzwfblfow) has joined #beagle
  • [20:30:44] <lynx_> sorry on beagle's site
  • [20:31:01] <lynx_> anyone here
  • [20:31:24] * lynx_ is now known as lynx2112
  • [20:32:03] * lynx2112 (i=4bb938fc@gateway/web/freenode/x-ulzwyrizzwfblfow) Quit (Client Quit)
  • [20:35:30] * guillaum1 (n=gl@AMontsouris-153-1-14-16.w86-212.abo.wanadoo.fr) has joined #beagle
  • [20:35:33] * puppy2 (n=puppy2@bas1-windsor12-1128690953.dsl.bell.ca) has joined #beagle
  • [20:35:34] * memento_mori (n=memento_@78.144.137.222) has joined #beagle
  • [20:43:42] * puppy2 (n=puppy2@bas1-windsor12-1128690953.dsl.bell.ca) Quit (Read error: 60 (Operation timed out))
  • [20:50:46] * Ceriand|desktop (n=Ceriand@unaffiliated/ceriand) has joined #beagle
  • [20:52:17] * hrw|gone (n=hrw@chello089078170228.chello.pl) Quit ()
  • [20:53:30] * hrw (n=hrw@chello089078170228.chello.pl) has joined #beagle
  • [20:54:38] <hrw> morning
  • [20:54:48] <mru> morning hrw
  • [20:55:24] * expert (i=18063b54@gateway/web/freenode/x-qelzeivixnuidlny) has joined #beagle
  • [20:58:11] <expert> Hi all, I mistakenly connected a 12v adaptor (which was NOT connected to the wall AC outlet) to the beagleboard's 5v socket. As it was not connected to the wall outled only the stored charge got used up, but now the beagleboard has stopped working
  • [20:58:19] <expert> i only get the pwr led
  • [20:58:35] <expert> the usr leds and all otheer leds are off
  • [20:59:01] <expert> when i connect it thru usb-otg i dont get any led on
  • [20:59:13] <expert> is the board repairable ??
  • [21:03:19] * rkirti (n=oespirit@203.199.213.3) Quit (Read error: 60 (Operation timed out))
  • [21:03:20] <mru> maybe
  • [21:03:31] <mru> depends on what you fried
  • [21:04:09] <mru> interesting choice of nick btw
  • [21:04:42] <expert> any way to check what i fired
  • [21:04:43] <mru> _av500_: did you see this? we have a fresh case of 12V
  • [21:04:47] * memento_mori is now known as pie
  • [21:05:02] * pie is now known as zmm
  • [21:06:43] <expert> Thanks for the reply. Any way to check what i fried??
  • [21:07:01] <Crofton|work> search the mailiing list for 12 volts ....
  • [21:07:05] <Crofton|work> there have been some emails
  • [21:07:16] <expert> ok.
  • [21:07:19] <expert> Thanks
  • [21:11:02] * expert (i=18063b54@gateway/web/freenode/x-qelzeivixnuidlny) Quit ("Page closed")
  • [21:13:09] * zmm (n=memento_@78.144.137.222) has left #beagle
  • [21:13:17] <mru> is 12V still the record?
  • [21:13:36] <mru> I guess it's rare to have higher-voltage supplies with that plug
  • [21:15:30] <ThomasEgi> mru, donate ma a board and i'll go up to 30V :P
  • [21:22:13] * kukyakya (i=6e4c5fda@gateway/web/freenode/x-zkgjkllgtexnnutj) has joined #beagle
  • [21:22:20] * memento_mori (n=memento_@78.144.137.222) has joined #beagle
  • [21:22:40] * AndChat| (n=vindolin@p5B24E9F7.dip.t-dialin.net) has joined #beagle
  • [21:25:57] <kukyakya> i'm trying to build X-Loader and U-boot with NEON support
  • [21:26:08] <kukyakya> is putting -mfpu=neon -mfloat-abi=softfp to CFLAGS all i should do??
  • [21:26:31] * ant__ (n=andrea@host93-250-dynamic.2-87-r.retail.telecomitalia.it) has joined #beagle
  • [21:26:55] <kukyakya> it seems that it nicely works but i'm not so sure im doing right
  • [21:28:06] * hrw is now known as hrw|gone
  • [21:28:52] * vindolin (n=vindolin@tmo-101-41.customers.d1-online.com) Quit (Read error: 110 (Connection timed out))
  • [21:41:55] * Meizirkki (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) Quit (Remote closed the connection)
  • [21:45:51] * bazbell (n=bazbell@nat/ti/x-epeyqehlihfvvnbq) Quit (Remote closed the connection)
  • [21:49:59] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [21:56:18] * brolin (n=brolin@nat212.udea.edu.co) Quit (Client Quit)
  • [22:10:14] <topi_> has anyone considered using these Nanovision Mimo 7" USB screens with the Beagle? I can't find any info on these DisplayLink chips. I wonder if there's Linux sources so that you don't need x86.
  • [22:11:42] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [22:27:00] * Gaston|Home (n=Miranda@c-012fe353.155-1-64736c11.cust.bredbandsbolaget.se) has joined #beagle
  • [22:28:58] * andersos (n=andersos@a150.ip4.netikka.fi) has joined #beagle
  • [22:39:16] * tegila (n=tegila@189-015-108-188.xd-dynamic.ctbcnetsuper.com.br) has joined #beagle
  • [22:40:44] * memento_mori (n=memento_@78.144.137.222) Quit ("Leaving")
  • [22:44:39] * roar (i=51bf3b88@gateway/web/freenode/x-imprmxevpvdtrkgp) has joined #beagle
  • [22:47:01] * tegila (n=tegila@189-015-108-188.xd-dynamic.ctbcnetsuper.com.br) has left #beagle
  • [22:47:51] * roar (i=51bf3b88@gateway/web/freenode/x-imprmxevpvdtrkgp) Quit (Client Quit)
  • [22:52:22] <topi_> ok, I found out that there is a displaylink driver in 2.6.31 kernel and there's a xf86 video module for it as well
  • [22:56:09] * XorA|gone is now known as XorA
  • [22:57:02] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [23:02:18] * eFfeM (n=frans@j192117.upc-j.chello.nl) Quit ("Leaving.")
  • [23:11:37] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [23:14:42] * davidcb (n=David@c-24-0-1-239.hsd1.nj.comcast.net) has joined #beagle
  • [23:16:49] * Analias (n=analias@c-68-35-8-162.hsd1.nm.comcast.net) Quit ("Leaving.")
  • [23:17:54] * flo_lap (n=fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [23:18:07] * flo_lap is now known as florian
  • [23:33:46] * AndrevS is now known as andrevs
  • [23:44:40] * spvensko (n=spvensko@12.94.226.158) Quit (Read error: 60 (Operation timed out))
  • [23:51:47] * spvensko (n=spvensko@12.94.226.158) has joined #beagle
  • [23:59:08] * florian (n=fuchs@Maemo/community/contributor/florian) Quit (Read error: 113 (No route to host))