• [00:00:25] * rsalveti (n=rsalveti@200.184.118.130) Quit (Remote closed the connection)
  • [00:01:12] * archae0pteryx (n=snewman@207.47.42.130.static.nextweb.net) has joined #beagle
  • [00:03:03] * fulgas is now known as FuL|OUT
  • [00:08:14] * likewise (n=chatzill@82-171-51-231.ip.telfort.nl) Quit (Read error: 60 (Operation timed out))
  • [00:14:20] * factor (n=factor@ip70-189-85-196.ok.ok.cox.net) Quit ("Leaving")
  • [00:17:39] * archae0pteryx1 (n=snewman@207.47.42.130.static.nextweb.net) Quit (Read error: 110 (Connection timed out))
  • [00:19:31] <Scorpiion> is there any reported problems with wireless usb deviecs? or simply does that not work?
  • [00:19:52] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) Quit ("Leaving")
  • [00:20:05] <Scorpiion> becuase my wireless mouse/keyboard that I use in Linux at my desktop did not work...
  • [00:21:09] <Scorpiion> and as I see it either it is becuase they are wireless (one usb adapter for them both) or becuase there is something wrong with my installation..
  • [00:23:01] <Scorpiion> to thoose I talked to earlier I can tell that I now have X working with E17! I just need the keyboard to work.. but I will try go get some usb keyboard from some friend tomorrow adn try that out.. even thought it would be good to hear if anyone else have had any succes with wireless keyboard/mouse.. :)
  • [00:26:09] * dcramer_ (n=davec@dcdsl.ebox.com) Quit (Read error: 104 (Connection reset by peer))
  • [00:26:12] * niclas (n=n-anderb@nat/ti/x-zqdwxfuvwljpnhbp) Quit ()
  • [00:31:28] * robclark (n=robclark@nat/ti/x-itqsfxeedlmfaily) has joined #beagle
  • [00:33:50] * CruNcher (n=luls_lol@dslb-084-058-156-218.pools.arcor-ip.net) has joined #beagle
  • [00:35:16] * dcramer (n=davec@dcdsl.ebox.com) has joined #beagle
  • [00:41:22] * JumpSh0t (n=camerons@CPE-58-160-58-5.vic.bigpond.net.au) has joined #beagle
  • [00:50:07] * hyc_tb (n=hyc@76.91.220.157) Quit (Read error: 104 (Connection reset by peer))
  • [01:01:18] * BThompsonD (n=bernie@cpe-66-25-17-127.tx.res.rr.com) has joined #beagle
  • [01:08:23] * philv (n=huh@lebesgue.cowpig.ca) has joined #beagle
  • [01:14:49] * _tretas (i=d9813953@gateway/web/freenode/x-aanrakvanstecbbs) Quit (Ping timeout: 180 seconds)
  • [01:16:38] * likewise_ (n=chatzill@82-171-51-231.ip.telfort.nl) Quit ("ChatZilla 0.9.85 [Firefox 3.0.13/2009080315]")
  • [01:21:48] * ogra (n=ogra@ubuntu/member/ogra) Quit (Read error: 104 (Connection reset by peer))
  • [01:22:15] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
  • [01:25:34] * Cru_N_cher (n=luls_lol@dslb-084-058-156-218.pools.arcor-ip.net) has joined #beagle
  • [01:26:11] * rsalveti (n=rsalveti@189.70.48.107) has joined #beagle
  • [01:28:23] * CruNcher (n=luls_lol@dslb-084-058-156-218.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [01:30:59] * raster (n=raster@enlightenment/developer/raster) Quit ("Gettin' stinky!")
  • [01:53:07] * djlewis (i=41424c20@gateway/web/freenode/x-clqboojucgrlqbrd) has joined #beagle
  • [01:54:03] <djlewis> hi guys,
  • [01:57:29] <lemay> heya djlewis
  • [01:57:45] <djlewis> how the heck are ya lemay ?
  • [02:06:15] * alecrim (n=alecrim@189.2.128.130) Quit (Remote closed the connection)
  • [02:10:40] * Cru_N_cher is now known as CruNcher
  • [02:24:55] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [02:41:23] <lemay> mru: can you tell me why I should avoid memcpy while doing video processing?
  • [02:42:28] * jipi (n=jipi@bb121-6-205-139.singnet.com.sg) has joined #beagle
  • [02:45:36] * prpplague (n=dave123_@ppp-70-242-113-205.dsl.rcsntx.swbell.net) has joined #beagle
  • [02:45:40] <prpplague> sakoman ping
  • [02:49:55] * hyc (n=hyc@76.91.220.157) has joined #beagle
  • [02:57:56] * watts2 (n=W@7-183-126-200.fibertel.com.ar) has joined #beagle
  • [03:01:22] * cody____ (n=cody@dslb-084-056-077-195.pools.arcor-ip.net) has joined #beagle
  • [03:02:57] * raster (n=raster@enlightenment/developer/raster) has joined #beagle
  • [03:07:20] * sakoman (n=sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) Quit (Remote closed the connection)
  • [03:07:35] * jipi (n=jipi@bb121-6-205-139.singnet.com.sg) Quit (Read error: 110 (Connection timed out))
  • [03:12:28] <sakoman_> prpplague: pong
  • [03:16:47] * Thephi (i=4618d8d7@gateway/web/freenode/x-jnpdkbfxhnusbpdf) has joined #beagle
  • [03:16:52] <Thephi> hi
  • [03:17:07] * Thephi (i=4618d8d7@gateway/web/freenode/x-jnpdkbfxhnusbpdf) Quit (Client Quit)
  • [03:17:39] * philosopher (n=chatzill@bas6-montreal19-1176033495.dsl.bell.ca) has joined #beagle
  • [03:18:21] * javaJake (n=javaJake@unaffiliated/javajake) Quit ("night")
  • [03:18:32] <philosopher> is meamo running on the beagleboard ?
  • [03:19:47] * sakoman__ (n=sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) has joined #beagle
  • [03:20:19] * cody___ (n=cody@dslb-084-056-096-027.pools.arcor-ip.net) Quit (Read error: 110 (Connection timed out))
  • [03:22:36] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [03:24:40] * sakoman_ (n=sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) Quit (Read error: 145 (Connection timed out))
  • [03:24:49] * sakoman__ is now known as sakoman
  • [03:25:56] * javaJake (n=javaJake@unaffiliated/javajake) has joined #beagle
  • [03:28:53] <djlewis> sakoman: taking off the corperate badge?
  • [03:29:07] <djlewis> corporate
  • [03:29:37] <sakoman> nah, corporate badge is leading and trailing underscores
  • [03:29:41] <philosopher> nevermind found something
  • [03:30:12] <djlewis> hmmm, i use a trailing sometimes at the office
  • [03:30:21] <sakoman> I had to reboot my router and that always seems to cause me to pick up a trailing underscore or two
  • [03:31:16] * maczor (i=cb342c66@gateway/web/freenode/x-fuazxyjwvphwmuuf) has joined #beagle
  • [03:31:37] <djlewis> yep, routers like to redirect ;)
  • [03:33:49] * rkirti (n=oespirit@203.199.213.3) Quit (Read error: 104 (Connection reset by peer))
  • [03:37:51] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [03:38:32] * raster (n=raster@enlightenment/developer/raster) Quit ("Gettin' stinky!")
  • [03:41:12] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [03:44:47] * MostAwesomeDude (n=simpson@c-67-170-132-175.hsd1.or.comcast.net) Quit ("leaving")
  • [03:45:46] * MostAwesomeDude (n=simpson@c-67-170-132-175.hsd1.or.comcast.net) has joined #beagle
  • [03:52:53] * MostAwesomeDude (n=simpson@c-67-170-132-175.hsd1.or.comcast.net) Quit ("Changing server")
  • [03:53:22] * MostAwesomeDude (n=simpson@c-67-170-132-175.hsd1.or.comcast.net) has joined #beagle
  • [04:05:36] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [04:08:14] * maczor (i=cb342c66@gateway/web/freenode/x-fuazxyjwvphwmuuf) Quit ("Page closed")
  • [04:16:24] * Openfree (n=Openfree@58.33.69.192) Quit (Remote closed the connection)
  • [04:17:52] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [04:33:06] * rsalveti (n=rsalveti@189.70.48.107) Quit (Remote closed the connection)
  • [04:56:40] * BThompsonD (n=bernie@cpe-66-25-17-127.tx.res.rr.com) Quit ("Leaving.")
  • [05:00:36] * dirk2 (n=dirk@p5B040FB4.dip0.t-ipconnect.de) has joined #beagle
  • [05:37:00] * andersos_ (n=andersos@d991.ip15.netikka.fi) has joined #beagle
  • [05:49:18] * djlewis (i=41424c20@gateway/web/freenode/x-clqboojucgrlqbrd) Quit (Ping timeout: 180 seconds)
  • [06:02:53] * robclark (n=robclark@nat/ti/x-itqsfxeedlmfaily) Quit ()
  • [06:08:57] * Entasis (n=Jarred@121.45.48.214) has joined #beagle
  • [06:19:42] * maelcum (n=horst@g225104252.adsl.alicedsl.de) Quit (Remote closed the connection)
  • [06:24:55] * ArteK (n=Artur@81.15.241.96) has joined #beagle
  • [06:36:09] * watts2 (n=W@7-183-126-200.fibertel.com.ar) has left #beagle
  • [06:57:06] * Scorpiion (n=quassel@213-21-84-107.bon.t3.se) Quit (Read error: 60 (Operation timed out))
  • [07:00:07] * bmc_ (n=bmc@7-183-126-200.fibertel.com.ar) Quit (Read error: 110 (Connection timed out))
  • [07:08:41] * dirk2 (n=dirk@p5B040FB4.dip0.t-ipconnect.de) Quit ("Konversation terminated!")
  • [07:10:00] * killring (n=killring@adsl-76-226-149-227.dsl.sfldmi.sbcglobal.net) Quit ()
  • [07:14:57] * _koen_ (n=x0115699@nat/ti/x-upansitwdbknfgki) Quit (Remote closed the connection)
  • [07:39:46] * Christos_N (n=Christos@ppp-94-66-38-76.home.otenet.gr) has joined #beagle
  • [07:41:08] * MCTouch (n=MCTouch@5acb05b1.bb.sky.com) has joined #beagle
  • [07:51:45] * pH5 (n=ph5@e178218122.adsl.alicedsl.de) has joined #beagle
  • [08:05:06] * jipi (n=jipi@cm37.zeta196.maxonline.com.sg) has joined #beagle
  • [08:09:21] * philosopher (n=chatzill@bas6-montreal19-1176033495.dsl.bell.ca) Quit (Remote closed the connection)
  • [08:39:12] * mrc_001 (n=mrc_001@91-113-124-73.adsl.highway.telekom.at) has joined #beagle
  • [08:41:23] * siji (n=siji@122.170.9.183) has joined #beagle
  • [08:41:34] <siji> hi all
  • [08:41:53] <siji> i am trying to boot beagle board frm nand flash
  • [08:42:08] <siji> but it's direclty booting to SD card
  • [08:42:21] <siji> hw can i boot from nand
  • [08:53:30] * Scorpiion (n=robert@213-21-84-107.bon.t3.se) has joined #beagle
  • [08:54:47] <Scorpiion> Hi, my wireless keyboard does not seam to work with my beagleboard... is this a knowed issue or should wireless keyboards work just as wired? it's an hp wireless keybboard and mouse..
  • [08:57:56] * nrossi (n=na@61.37.96.58.static.exetel.com.au) has joined #beagle
  • [08:59:29] <Scorpiion> no one that have used an wireless keyboard with beagle?
  • [09:02:08] <lemay> my logitech bluetooth keyboard and mouse work fine Scorpiion
  • [09:02:31] <lemay> sometimes I have to restart the beagleboard if it did not detect them on the first try
  • [09:02:37] <lemay> but usually it gets them
  • [09:03:37] <lemay> im using the angstrom distribution and have my bluetooth receiver plugged into a usb hub
  • [09:05:08] <Scorpiion> lemay: okey then there is hope! :)
  • [09:05:48] <Scorpiion> I also have the ??ngstr??m dist..I guess I have to try some more..
  • [09:13:39] * pH5 (n=ph5@e178218122.adsl.alicedsl.de) Quit ("bye")
  • [09:14:58] * jipi (n=jipi@cm37.zeta196.maxonline.com.sg) Quit ("Leaving")
  • [09:16:26] * courville (n=courvill@82.238.73.80) has joined #beagle
  • [09:25:13] * hyc (n=hyc@76.91.220.157) Quit (Read error: 110 (Connection timed out))
  • [09:46:17] * courville (n=courvill@82.238.73.80) Quit (Read error: 148 (No route to host))
  • [09:50:21] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [09:50:48] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) has joined #beagle
  • [09:59:48] * radhermit (n=radhermi@c-24-20-133-71.hsd1.or.comcast.net) Quit (Client Quit)
  • [10:00:14] * surikatga (i=530a0bb0@gateway/web/freenode/x-nhwskutgkoxrlhva) has joined #beagle
  • [10:00:46] <surikatga> hi, how i can check adress of file for passing to 'bootm' argument?
  • [10:01:38] * thaytan (n=jan@A-102-50.cust.iol.ie) has joined #beagle
  • [10:04:33] * lemay (n=chatzill@ip68-107-86-146.sd.sd.cox.net) Quit ("ChatZilla 0.9.85 [Firefox 3.0.13/2009080315]")
  • [10:05:03] * lemay (n=chatzill@ip68-107-86-146.sd.sd.cox.net) has joined #beagle
  • [10:07:48] <siji> How ic an i boot my beagle board to nand gate
  • [10:07:54] <siji> now it's drieclty booting from sd card
  • [10:09:39] <Scorpiion> siji: explain a little more what you want to do?
  • [10:10:41] <siji> I got beagle board ,SD card with angstrom OS
  • [10:10:52] <siji> and it's booting direclty into the sd
  • [10:11:18] <siji> but now i want to boot it from nand memory
  • [10:13:11] <siji> Scorpiion, u there?
  • [10:13:23] <Scorpiion> siji: yeah now I'm here.
  • [10:13:27] <siji> ok :)
  • [10:13:31] * davy (i=9a140594@gateway/web/freenode/x-kniykzvxirmizvtw) has joined #beagle
  • [10:13:37] <Scorpiion> okey
  • [10:13:49] <Scorpiion> one way is to simply take out the SD card.. :)
  • [10:14:00] <siji> yes tried
  • [10:14:05] <Scorpiion> and connect with the serieall interface..
  • [10:14:10] <siji> but still only that beagleboard image is cming
  • [10:14:15] <siji> no command prompt
  • [10:14:16] <Scorpiion> I think you might have missed that?
  • [10:14:30] <Scorpiion> yes but you can't use that way..
  • [10:14:50] <siji> means
  • [10:14:54] <Scorpiion> you need to use a program like hyperterminal (windows) or minicom (linux)..
  • [10:15:05] <Scorpiion> and connect with that..
  • [10:15:10] <siji> yes i tried that too
  • [10:15:16] <siji> through minicom
  • [10:15:19] <Scorpiion> I'll give you a link..
  • [10:15:24] <siji> ok
  • [10:15:30] <Scorpiion> maybe you have not set it up right.. :)
  • [10:15:35] <siji> oh ok
  • [10:15:52] <siji> i refered one doc frm google code page
  • [10:16:03] <siji> for setting minicom for beagleboard
  • [10:16:09] <siji> anyway pls give me the link
  • [10:16:12] <siji> will try again
  • [10:16:15] <Scorpiion> take out the SD card.
  • [10:16:21] <siji> ok
  • [10:16:24] <Scorpiion> and then follow this tutorial from the start..
  • [10:16:26] <Scorpiion> http://elinux.org/BeagleBoardBeginners
  • [10:16:29] <siji> ok
  • [10:16:40] <siji> let me try
  • [10:16:42] <siji> thanks
  • [10:16:58] <Scorpiion> then you can skip the parts about the sd card since you allready have that.. :)
  • [10:17:02] <Scorpiion> good luck!
  • [10:17:33] <siji> ok thanks
  • [10:17:54] <Scorpiion> come back and tell if it works later.. :)
  • [10:18:36] * dual (n=dual@5.79-160-122.customer.lyse.net) has joined #beagle
  • [10:24:06] <siji> Scorpiion, Sure
  • [10:24:19] <Scorpiion> good
  • [10:32:05] <surikatga> when im booting from mmc i got error: Wrong Image Format for bootm command ERROR: can't get kernel image!
  • [10:32:19] <surikatga> im guess that the loadadress for bootm command is wrong
  • [10:32:54] <Scorpiion> surikatga: first time you use the board?
  • [10:33:01] <surikatga> no
  • [10:33:10] <Scorpiion> ok
  • [10:33:14] <surikatga> i got the BBRevCValidation
  • [10:33:18] <surikatga> firstly
  • [10:33:36] <surikatga> now i try to boot angstrom console-image builded by openembedded+bitbake
  • [10:34:02] <Scorpiion> okey but you have not booted any linux dist yet?
  • [10:35:02] <surikatga> i got the test from the http://code.google.com/p/beagleboard/wiki/BeagleboardRevCValidation
  • [10:35:18] <surikatga> and i booted linux dist
  • [10:36:38] * siji (n=siji@122.170.9.183) Quit ("Leaving")
  • [10:37:35] <Scorpiion> surikatga: okey.. sorry can't help you right now I'm a little busy..
  • [10:37:59] <surikatga> no problem
  • [10:39:27] * nrossi (n=na@61.37.96.58.static.exetel.com.au) has left #beagle
  • [10:40:13] * siji (n=siji@122.170.9.183) has joined #beagle
  • [10:40:14] <surikatga> Scorpiion: can i msg u later?
  • [10:42:42] * neo (i=4e9d08c3@gateway/web/freenode/x-axfkobztxrsbknth) has joined #beagle
  • [10:43:20] * neo (i=4e9d08c3@gateway/web/freenode/x-axfkobztxrsbknth) Quit (Client Quit)
  • [10:58:09] * thaytan (n=jan@A-102-50.cust.iol.ie) Quit ("Ex-Chat")
  • [11:02:43] * Yuvi (n=yuvi@d-69-161-87-68.cpe.metrocast.net) Quit ()
  • [11:03:14] <siji> hey Scorpiion,
  • [11:03:16] <siji> no hope
  • [11:12:33] * Wiedi (n=wiedi@newton-air.w.fruky.net) has joined #beagle
  • [11:14:35] <siji> Scorpiion, there?
  • [11:33:16] * mrc_001 (n=mrc_001@91-113-124-73.adsl.highway.telekom.at) Quit (Read error: 104 (Connection reset by peer))
  • [11:33:19] * mrc_001_ (n=mrc_001@212-183-118-72.adsl.highway.telekom.at) has joined #beagle
  • [11:33:27] * mrc_001_ is now known as mrc_001
  • [11:33:48] <siji> Hi all
  • [11:34:04] <siji> am trying to boot the beagle board from nand memory
  • [11:34:10] <siji> but failed
  • [11:34:29] <siji> i think i configured Minicom as per the docs
  • [11:34:53] <siji> and also tested the port(serial) too
  • [11:37:09] * davy (i=9a140594@gateway/web/freenode/x-kniykzvxirmizvtw) Quit (Ping timeout: 180 seconds)
  • [11:40:58] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) has joined #beagle
  • [11:41:27] * armin76 (n=armin@gentoo/developer/armin76) Quit ()
  • [11:42:17] * alecrim (n=alecrim@201008206043.user.veloxzone.com.br) has joined #beagle
  • [11:45:41] * metanurb (n=dont@p4FE9C15C.dip.t-dialin.net) has joined #beagle
  • [11:46:41] * armin76 (n=armin@gentoo/developer/armin76) has joined #beagle
  • [11:47:37] <siji> hey wht does mean by MLO
  • [11:47:40] <siji> ??
  • [11:53:31] * zuh (i=3547a31e@humboldt.pingu.fi) Quit (Read error: 104 (Connection reset by peer))
  • [11:53:51] * zuh (i=995a4d0f@81.22.249.143) has joined #beagle
  • [12:00:35] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [12:02:37] * tretas_ (i=d9813953@gateway/web/freenode/x-jfizzbrabraqddzz) has joined #beagle
  • [12:04:26] * Crofton|work (n=balister@pool-71-171-22-222.nwrknj.east.verizon.net) Quit ("Leaving")
  • [12:07:38] * Openfree (n=Openfree@222.65.99.6) has joined #beagle
  • [12:07:57] <surikatga> its is possible to use gcc under linux on beagleboard?
  • [12:10:16] * Crofton|work (n=balister@pool-71-171-22-222.nwrknj.east.verizon.net) has joined #beagle
  • [12:11:27] <_av500_> yes
  • [12:15:23] * Yuvi (n=yuvi@d-69-161-87-68.cpe.metrocast.net) has joined #beagle
  • [12:16:41] <surikatga> but i didnt found any gcc in /bin /usr/bin etc.
  • [12:30:04] * thaytan (n=jan@A-102-50.cust.iol.ie) has joined #beagle
  • [12:34:54] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) Quit ()
  • [12:39:51] * FuL|OUT (n=fn@85.138.20.210) Quit (Read error: 113 (No route to host))
  • [12:41:24] * mrc_001_ (n=mrc_001@91-114-191-216.adsl.highway.telekom.at) has joined #beagle
  • [12:42:03] * courville (n=courvill@courville.org) has joined #beagle
  • [12:48:16] * metanurb (n=dont@p4FE9C15C.dip.t-dialin.net) Quit ()
  • [12:59:49] * mrc_001 (n=mrc_001@212-183-118-72.adsl.highway.telekom.at) Quit (Read error: 110 (Connection timed out))
  • [13:01:28] * mrc_001 (n=mrc_001@91-114-181-205.adsl.highway.telekom.at) has joined #beagle
  • [13:05:31] * JumpSh0t (n=camerons@CPE-58-160-58-5.vic.bigpond.net.au) Quit (Read error: 110 (Connection timed out))
  • [13:07:13] * mrc_001_ (n=mrc_001@91-114-191-216.adsl.highway.telekom.at) Quit (Read error: 60 (Operation timed out))
  • [13:15:38] * siji (n=siji@122.170.9.183) Quit ("Leaving")
  • [13:25:34] * CruNcher (n=luls_lol@dslb-084-058-156-218.pools.arcor-ip.net) Quit ()
  • [13:25:38] * CruNcher (n=luls_lol@dslb-084-058-156-218.pools.arcor-ip.net) has joined #beagle
  • [13:29:14] * Christos_N (n=Christos@ppp-94-66-38-76.home.otenet.gr) Quit ("We'll meet again")
  • [13:29:40] * Christos_N (n=Christos@ppp-94-66-38-76.home.otenet.gr) has joined #beagle
  • [13:35:41] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) has joined #beagle
  • [13:43:00] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [13:48:54] * rkirti (n=oespirit@203.199.213.3) has joined #beagle
  • [13:49:34] * Meizirkki (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) has joined #beagle
  • [13:49:42] <Meizirkki> hi all
  • [13:50:16] <Meizirkki> has anyone here teated n900 Xorg driver on beagle?
  • [13:50:26] <Meizirkki> (Nokia N900)
  • [13:52:21] <XorA|gone> isnt it the Xorg driver OE already uses?
  • [13:52:49] * prpplague (n=dave123_@ppp-70-242-113-205.dsl.rcsntx.swbell.net) has left #beagle
  • [13:57:02] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [14:07:53] * Meizirkki (n=Meizirkk@bbwirelessgw2-feeedc00-64.dhcp.inet.fi) Quit (Read error: 104 (Connection reset by peer))
  • [14:17:22] * courville (n=courvill@courville.org) Quit (Read error: 113 (No route to host))
  • [14:22:13] * Yuvi (n=yuvi@d-69-161-87-68.cpe.metrocast.net) Quit ()
  • [14:26:13] * surikatga (i=530a0bb0@gateway/web/freenode/x-nhwskutgkoxrlhva) Quit (Ping timeout: 180 seconds)
  • [14:38:12] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) Quit (Remote closed the connection)
  • [14:48:59] * ArteK (n=Artur@81.15.241.96) has left #beagle
  • [14:59:45] * rbelem (n=rodrigo@pdpc/supporter/active/rbelem) has joined #beagle
  • [15:00:07] * BThompsonD (n=bernie@cpe-66-25-17-127.tx.res.rr.com) has joined #beagle
  • [15:00:27] * tcpip4000 (n=fulano@190.147.32.47) has joined #beagle
  • [15:03:34] * tcpip4000 (n=fulano@190.147.32.47) has left #beagle
  • [15:03:54] * ssvb (n=ssvb___@a88-112-120-50.elisa-laajakaista.fi) has joined #beagle
  • [15:14:14] * Openfree (n=Openfree@222.65.99.6) Quit (Remote closed the connection)
  • [15:18:21] * Scorpiion (n=robert@213-21-84-107.bon.t3.se) Quit (Read error: 113 (No route to host))
  • [15:28:29] * killring (n=killring@adsl-76-226-120-164.dsl.sfldmi.sbcglobal.net) has joined #beagle
  • [15:31:33] * dcramer (n=davec@dcdsl.ebox.com) Quit (Read error: 113 (No route to host))
  • [15:31:39] * dcramer (n=davec@dcdsl.ebox.com) has joined #beagle
  • [15:45:55] * wardred (n=wardred@75.142.253.144) has joined #beagle
  • [15:55:35] * mrc_001 (n=mrc_001@91-114-181-205.adsl.highway.telekom.at) Quit ()
  • [15:56:13] * rkirti (n=oespirit@203.199.213.3) Quit (Read error: 104 (Connection reset by peer))
  • [15:57:22] * proppy (n=proppy@88.171.43.213) has joined #beagle
  • [16:02:14] * Entasis (n=Jarred@121.45.48.214) Quit ("Leaving")
  • [16:04:04] * pH5 (n=ph5@g229140222.adsl.alicedsl.de) has joined #beagle
  • [16:07:01] * tcpip4000 (n=fulano@190.147.32.47) has joined #beagle
  • [16:16:42] * wardred (n=wardred@75.142.253.144) Quit (Remote closed the connection)
  • [16:22:54] * mrc_001 (n=mrc_001@d86-33-180-75.cust.tele2.at) has joined #beagle
  • [16:23:19] * jconnolly is now known as jconnolly|away
  • [16:36:29] * FuL|OUT (n=fn@85.138.20.210) has joined #beagle
  • [16:39:10] * JoeSchmo (n=jciccone@pool-72-76-241-154.nwrknj.fios.verizon.net) Quit ("The moving cursor writes, and having written, blinks on...")
  • [16:44:39] * rbelem (n=rodrigo@pdpc/supporter/active/rbelem) Quit ("Leaving")
  • [16:49:08] * netio (i=530a0bb0@gateway/web/freenode/x-obwphqzdgmtvuzzc) has joined #beagle
  • [16:54:20] * booxter (n=booxter@212.98.182.22) has joined #beagle
  • [16:55:54] <CruNcher> Iphone 3GS is Omap3 based right ?
  • [17:01:06] <pH5> no. some samsung soc
  • [17:01:22] <pH5> cortex a8, too, though
  • [17:01:44] <mru> or armv7 at least
  • [17:02:06] * andersos_ (n=andersos@d991.ip15.netikka.fi) Quit (Remote closed the connection)
  • [17:05:17] <muriani> iut's A8
  • [17:05:21] <muriani> plus SGX
  • [17:05:31] <CruNcher> yes so the same as beagle ;)
  • [17:05:36] <muriani> and apparently some sick DSP if it's pushing 1080p h.264 like they claim
  • [17:05:51] <muriani> not quite the same. the DSP would be where the difference lies.
  • [17:06:12] <muriani> I think the Nokia N900 is omap3 though?
  • [17:06:25] <CruNcher> muriani no one really tested that intensely it seems to be 720p BP like most other PMPs these days
  • [17:07:10] <muriani> Doesn't really matter to me, iphone doesn't have outputs for 1080p video anyway :p
  • [17:07:15] <muriani> Not yet, at least
  • [17:07:36] * pH5 looking forward to omap4 hdmi output
  • [17:07:36] <CruNcher> im sure the hardware is inside to get HDMI out
  • [17:08:07] <muriani> whether it's hooked up to the dock connector is the next question.
  • [17:08:28] <CruNcher> wait for the next accessory haha ;)
  • [17:09:48] <CruNcher> of course you have to extra pay for this feature
  • [17:11:34] <CruNcher> though comparing 80$ HDMI out capable Chinese PMP with the Iphone 3GS for what (800 $) is a little unfair ;)
  • [17:14:03] * rkirti (n=oespirit@203.199.213.3) has joined #beagle
  • [17:19:00] * cbrake_away is now known as cbrake
  • [17:29:31] * tcpip4000 (n=fulano@190.147.32.47) has left #beagle
  • [17:35:08] * davy (i=9a140594@gateway/web/freenode/x-namcqywqkdbkkmax) has joined #beagle
  • [17:35:38] <davy> hello
  • [17:36:21] * netio (i=530a0bb0@gateway/web/freenode/x-obwphqzdgmtvuzzc) Quit (Ping timeout: 180 seconds)
  • [17:36:23] <davy> i'm having trouble connecting serial
  • [17:36:30] <davy> nothing shows up
  • [17:37:26] <davy> and the display freezes at the beagle logo
  • [17:37:28] <davy> http://img21.imageshack.us/gal.php?g=dsc02986b.jpg
  • [17:38:46] * mrc_001 (n=mrc_001@d86-33-180-75.cust.tele2.at) Quit ()
  • [17:42:08] <AndrevS> hi
  • [17:42:45] <davy> hi
  • [17:42:51] <muriani> CruNcher: the accessory can't do shit unless they actually wired it to the dock connector
  • [17:47:15] * tcpip4000 (n=fulano@190.147.32.47) has joined #beagle
  • [17:47:31] * tcpip4000 (n=fulano@190.147.32.47) has left #beagle
  • [17:52:58] * odesus (n=odesus@200.92.73.152) has joined #beagle
  • [17:57:11] * robclark (n=robclark@nat/ti/x-frghiqscalqyzonj) has joined #beagle
  • [17:57:12] * maelcum (n=horst@g225105129.adsl.alicedsl.de) has joined #beagle
  • [18:07:05] <CruNcher> muriani is it allready clear that it isn't wired to the dock any infos what yet has been found out after reverse engineering the new 3GS ?
  • [18:08:33] <muriani> I don't know
  • [18:08:39] <CruNcher> though maybe apple has no interest in HDMI @ all and doing it over the Wifi 720p should be no problem in those bitrates
  • [18:08:42] <muriani> hence my "unless"
  • [18:08:48] <muriani> haha
  • [18:08:57] <muriani> riiight
  • [18:09:13] <CruNcher> would make sense Apple TV supports Wifi doesn't it ?
  • [18:09:38] <CruNcher> so transmiting it to the AppleTV should make them even more $$$
  • [18:09:39] <CruNcher> :D
  • [18:09:45] <muriani> then it would just act as a fileserver
  • [18:09:49] <muriani> (the ipod)
  • [18:10:09] <muriani> the device would just stream the data, not actually decode it
  • [18:10:14] <muriani> AppleTV would decode
  • [18:10:21] <CruNcher> exactly
  • [18:10:35] <CruNcher> nice costly ecosystem for their customers ;)
  • [18:10:41] <CruNcher> exactly as they like it
  • [18:11:56] * ArteK (n=Artur@81.15.241.96) has joined #beagle
  • [18:12:06] <CruNcher> but not only it would need to be decoded on the AppleTV also decrypted on the fly
  • [18:12:15] <CruNcher> speaking of DRM ;)
  • [18:12:33] <muriani> right
  • [18:12:37] <muriani> ApleTV handles all that
  • [18:12:39] <muriani> not the ipod
  • [18:12:43] <muriani> ipod/iphone
  • [18:12:50] * hrw|gone (n=hrw@chello089078170228.chello.pl) Quit (Read error: 104 (Connection reset by peer))
  • [18:12:58] <muriani> therefore there's no need to have output capability from the iphone itself
  • [18:13:02] <muriani> nor the decoding
  • [18:15:18] <CruNcher> yep their ecosystem
  • [18:15:34] <CruNcher> and all based on very low complex Video
  • [18:15:47] <CruNcher> to reach as much user as possible
  • [18:16:50] <CruNcher> but ok BP itself beats virtualy anything with a good Encoder :)
  • [18:17:04] <CruNcher> not Apples Encoder though ;)
  • [18:18:24] <muriani> I don't know anything about apple's encoder
  • [18:18:30] <muriani> and I don't particularly care
  • [18:20:56] <odesus> Hi! good morning
  • [18:21:10] <odesus> I have some problems running debian over beagleboard
  • [18:21:16] <odesus> can anybody help me?
  • [18:21:45] * andersos_ (n=andersos@d991.ip15.netikka.fi) has joined #beagle
  • [18:21:52] <CruNcher> muriani
  • [18:22:16] <CruNcher> http://x264dev.multimedia.cx/wp-content/uploads/2009/08/quality_chart1.png <- Mathematical Sub HVS efficiency
  • [18:22:28] <muriani> CruNcher: that means absolutely nothing to me.
  • [18:23:01] <muriani> I'm not interested in what goes on in the background with video encoding/decoding.
  • [18:23:05] <CruNcher> hehe the higher the graph the better ;)
  • [18:23:10] <CruNcher> look @ Apple
  • [18:23:27] <muriani> right
  • [18:23:27] * odesus (n=odesus@200.92.73.152) has left #beagle
  • [18:23:31] <muriani> I knew they duck
  • [18:23:33] <muriani> *suck
  • [18:23:37] <CruNcher> and @ x264 BP and compare to the other Video codecs
  • [18:23:38] <muriani> it's obvious in the videos
  • [18:33:35] * florian (n=fuchs@e179101056.adsl.alicedsl.de) has joined #beagle
  • [18:39:08] * odesus (n=odesus@200.92.73.152) has joined #beagle
  • [18:39:12] * bmc_ (n=bmc@7-183-126-200.fibertel.com.ar) has joined #beagle
  • [18:39:36] <odesus> Can anybody help me? I have a problem with beagleboard
  • [18:39:57] <odesus> I have uImage on SD and root fs on USB memory
  • [18:40:14] <odesus> at moment of booting simply stops
  • [18:40:33] <odesus> setenv bootargs 'console=ttyS2,115200n8 root=/dev/sda1 rootwait rootfstype=ext3 ro'
  • [18:40:52] <odesus> can anybody helpme?
  • [18:43:20] <florian> hmm... is ttyS2 the correct console port?
  • [18:44:21] <odesus> yes
  • [18:44:37] <odesus> I can see messages from booting process
  • [18:44:49] <odesus> 'cos if I put ttys0 I don't see anything
  • [18:46:30] <odesus> florian: is there anyway to know what devices is conected to beagleboard from uboot
  • [18:46:49] <florian> ok, where does the boot process stop?
  • [18:47:12] <odesus> here
  • [18:48:07] <odesus> [ 24.911315] Waiting for root device /dev/sda1...
  • [18:48:07] <odesus> [ 24.940734] mmc0: new high speed SD card at address b368
  • [18:48:07] <odesus> [ 24.946929] mmcblk0: mmc0:b368 SD 1.88 GiB
  • [18:48:07] <odesus> [ 24.951782] mmcblk0: p1
  • [18:48:29] * surikatga (i=530a0bb0@gateway/web/freenode/x-xvqjyufwswklbakr) has joined #beagle
  • [18:48:44] * MCTouch (n=MCTouch@5acb05b1.bb.sky.com) Quit ()
  • [18:49:19] <maelcum> odesus: debian, angstrom or something else?
  • [18:49:33] <odesus> maelcum debian release from robert nelson
  • [18:49:47] <maelcum> i've had a similar boot line in u-boot for debian - but it doesn't work with angstrom. angstrom needs the root filesystem mounted rw.
  • [18:49:50] <maelcum> hm
  • [18:50:11] <odesus> I have uImage on sd and root fs on USB
  • [18:50:15] <sakoman> odesus: my guess is that your kernel does not have everthing needed to access usb drive built in
  • [18:50:34] <odesus> sakoman is there any way to know how uboot labels devices
  • [18:50:42] <odesus> I mean can uboot tell us if usb is present?
  • [18:50:51] <maelcum> yeah, an external harddisk also appears as sda1 here, so probably it's just not recognized at all.
  • [18:50:52] <sakoman> i.e. some of the required drivers might be "m" in the defconfig rather than "y"
  • [18:51:24] <odesus> oh I understand sakoman..
  • [18:51:34] <sakoman> odesus: at this point u-boot isn't involved, it is the kernel usb support that is important
  • [18:52:00] <odesus> oh ok.. so I will recompile kernel
  • [18:52:04] <sakoman> good luck - have to leave now
  • [18:52:10] <odesus> thanks sakoman
  • [18:52:27] <odesus> maelcum are working with angstrom?
  • [18:53:22] * pH5 (n=ph5@g229140222.adsl.alicedsl.de) Quit (Read error: 110 (Connection timed out))
  • [18:53:46] * bmc_ (n=bmc@7-183-126-200.fibertel.com.ar) Quit ("Saliendo")
  • [18:53:53] <odesus> well thanks for your comments
  • [18:53:55] * pH5 (n=ph5@g229186096.adsl.alicedsl.de) has joined #beagle
  • [18:54:17] * odesus (n=odesus@200.92.73.152) has left #beagle
  • [18:54:31] * bmc_ (n=bmc@7-183-126-200.fibertel.com.ar) has joined #beagle
  • [18:54:54] <maelcum> impatient people...
  • [18:58:28] * viridior (n=viridis@ip98-169-152-164.dc.dc.cox.net) has left #beagle
  • [19:00:00] * pH5 (n=ph5@g229186096.adsl.alicedsl.de) Quit ("Leaving")
  • [19:02:45] * ElmiTheWizard (n=ElmiTheW@70.76-245-81.adsl-dyn.isp.belgacom.be) Quit (Read error: 110 (Connection timed out))
  • [19:03:01] * Watts1 (n=W@7-183-126-200.fibertel.com.ar) has joined #beagle
  • [19:06:37] * xxiao (n=chatzill@24.174.117.226) has joined #beagle
  • [19:08:24] * rbelem (n=rodrigo@pdpc/supporter/active/rbelem) has joined #beagle
  • [19:21:23] * davy (i=9a140594@gateway/web/freenode/x-namcqywqkdbkkmax) Quit (Ping timeout: 180 seconds)
  • [19:21:59] * BThompsonD (n=bernie@cpe-66-25-17-127.tx.res.rr.com) Quit ("Leaving.")
  • [19:22:09] * BThompsonD (n=bernie@cpe-66-25-17-127.tx.res.rr.com) has joined #beagle
  • [19:28:10] * thaytan (n=jan@A-102-50.cust.iol.ie) Quit (Read error: 110 (Connection timed out))
  • [19:28:42] * brolin_ (n=brolin@200.24.16.56) has joined #beagle
  • [19:28:58] * thaytan (n=jan@78.16.42.131) has joined #beagle
  • [19:30:11] * dcramer (n=davec@dcdsl.ebox.com) Quit (Read error: 104 (Connection reset by peer))
  • [19:30:25] * dcramer (n=davec@dcdsl.ebox.com) has joined #beagle
  • [19:36:37] * DaQatz (n=db@c-66-30-48-150.hsd1.nh.comcast.net) Quit (Read error: 110 (Connection timed out))
  • [19:37:00] * hyc (n=hyc@76.91.220.157) has joined #beagle
  • [19:41:49] * DaQatz (n=db@c-66-30-48-150.hsd1.nh.comcast.net) has joined #beagle
  • [19:52:33] * brolin_ (n=brolin@200.24.16.56) Quit ("Lost terminal")
  • [20:08:40] * jyelloz (n=jyelloz@adsl-75-51-164-88.dsl.lsan03.sbcglobal.net) has joined #beagle
  • [20:21:55] * killring (n=killring@adsl-76-226-120-164.dsl.sfldmi.sbcglobal.net) Quit ()
  • [20:35:36] * _FuL|OUT (n=fn@85.138.20.210) has joined #beagle
  • [20:43:39] * mrc_001 (n=mrc_001@d86-33-180-75.cust.tele2.at) has joined #beagle
  • [20:56:29] * ant__ (n=andrea@host31-251-dynamic.8-87-r.retail.telecomitalia.it) has joined #beagle
  • [20:59:36] * surikatga (i=530a0bb0@gateway/web/freenode/x-xvqjyufwswklbakr) Quit (Ping timeout: 180 seconds)
  • [21:02:46] * alecrim (n=alecrim@201008206043.user.veloxzone.com.br) Quit (Remote closed the connection)
  • [21:03:32] * Scorpiion (n=robert@213.21.84.107) has joined #beagle
  • [21:03:57] <Scorpiion> Hello.. anyone in here that uses the zd1211rw wireless chip? :)
  • [21:04:41] <Scorpiion> I'm very close to get to work on my Beagle Board with Arch linux on it but I just thought I could ask if anyone else uses this?
  • [21:05:21] * FuL|OUT (n=fn@85.138.20.210) Quit (Connection timed out)
  • [21:05:28] * _FuL|OUT is now known as FuL|OUT
  • [21:14:11] <cbrake> I'm trying to get 2.6.31 from git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git:master to boot on my beagle board
  • [21:14:14] <cbrake> should this work?
  • [21:14:39] <sakoman> cbrake: nah, not out of the box
  • [21:14:43] <cbrake> I get Uncompressing Linux, dots, and then nothing
  • [21:15:35] <lifeeth> kernel needs to be asked to print the rest on your serial port
  • [21:16:14] <sakoman> cbrake: I have it working both on overo and beagle, but it required several patches
  • [21:17:22] <cbrake> sakoman: are they available anywhere, or can you push to your git repo?
  • [21:17:47] <sakoman> cbrake: most of it is in my git repo
  • [21:17:57] <sakoman> let me check what I haven't pushed yet
  • [21:17:59] <cbrake> sakoman: I'm trying to do some testing with the rt patch on OMAP3
  • [21:18:11] <sakoman> I think there is one more ehci related patch I haven't pushed
  • [21:18:22] <sakoman> but otherwise all basic functionality is there
  • [21:18:36] <sakoman> it even works with a unified beagle/overo build
  • [21:18:47] <cbrake> sakoman: there are curently no differences between git://gitorious.org/linux-omap/mainline.git:master and git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git:master
  • [21:19:04] <cbrake> sakoman: is master the correct branch in your repo?
  • [21:19:46] <sakoman> actualy I haven't pushed things to my linux omap git
  • [21:19:55] <sakoman> I've been working with OE & patches
  • [21:20:52] <sakoman> http://www.sakoman.net/cgi-bin/gitweb.cgi?p=openembedded.git;a=commit;h=8d80f1dd00956bcf1b65304f6a0bd4eea21084d4
  • [21:21:21] <sakoman> let me put together another commit with the latest beagle stuff
  • [21:21:27] * dl9pf (n=dl9pf@opensuse/member/dl9pf) has joined #beagle
  • [21:21:43] * BThompsonD (n=bernie@cpe-66-25-17-127.tx.res.rr.com) Quit ("Leaving.")
  • [21:23:47] <cbrake> sakoman: which recipe builds the 2.6.31 kernel?
  • [21:24:13] <sakoman> cbrake: http://www.sakoman.net/cgi-bin/gitweb.cgi?p=openembedded.git;a=blob;f=recipes/linux/linux-omap3_git.bb;h=085ed8f704ed68f4402e77c4940cee756af40e65;hb=8d80f1dd00956bcf1b65304f6a0bd4eea21084d4
  • [21:25:56] <sakoman> I will push a revision in a moment -- you'll need it to get ehci working
  • [21:30:15] <sakoman> cbrake: OK, here's my latest checkpoint commit. still a work in progress
  • [21:30:23] <sakoman> http://www.sakoman.net/cgi-bin/gitweb.cgi?p=openembedded.git;a=commit;h=7c77a938ecb36071d3ac21db837fea255c10eab7
  • [21:30:59] * Scorpiion (n=robert@213.21.84.107) Quit (Remote closed the connection)
  • [21:32:25] * Wiedi (n=wiedi@newton-air.w.fruky.net) Quit ("^C")
  • [21:43:03] <cbrake> sakoman: thanks for all the help -- I'll give it a try
  • [21:53:18] * fischer1 (n=fischer1@fischerfamily.org) has joined #beagle
  • [21:54:22] * fischer (n=fischer1@fischerfamily.org) Quit (Read error: 110 (Connection timed out))
  • [21:54:49] * dl9pf (n=dl9pf@opensuse/member/dl9pf) Quit ("KVIrc 3.4.2 Shiny http://www.kvirc.net/")
  • [21:58:10] * ArteK (n=Artur@81.15.241.96) has left #beagle
  • [22:04:55] * gator (i=cf2f2cf6@gateway/web/freenode/x-yocgtsciiphdtuam) has joined #beagle
  • [22:05:36] * cbrake is now known as cbrake_away
  • [22:11:42] <gator> Just powered up my beagle with a serial term. It just starts spewing garbage to my term non-stop. Tried different baud rates. Anyone experience this?
  • [22:13:38] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit ("Up and at 'em, Atom Ant!")
  • [22:14:59] <booxter> gator: 1) check serial cable; 2) check terminal program settings.
  • [22:16:50] <gator> Thanks, tried all differnt combinations in term program. Suppose my cable could be faulty (bad gnd return or something) Wierd that it spews garbage non-stop
  • [22:18:17] <jyelloz> Hello. I've built an angstrom image recently but I'm not completely sure how to deploy it properly. I placed the kernel on my first partition and extracted the rootfs on the second partition and it starts up okay but I don't know what to do with the modules and the u-boot file.
  • [22:18:36] <jyelloz> Have you tried making your own serial cable?
  • [22:19:14] <jyelloz> From what I remember you only need a few wires and you can easily sort out how to make it work.
  • [22:22:16] <gator> Just bought a null-modem cable from Fry's and plugged it in. You're right, the serial port should be pretty straight fwd (TX, RX and GND). Seems unlikely to be something with the cable but I guess it is possible
  • [22:22:20] * davidthings (n=chatzill@adsl-69-236-103-24.dsl.pltn13.pacbell.net) has joined #beagle
  • [22:25:26] <jyelloz> Well there are some pictures in the latest manual that might give you some guidance. There's little risk in just switching two of the wires, right?
  • [22:25:48] <jyelloz> Anyway, does anyone here have experience in properly deploying angstrom linux?
  • [22:26:00] * proppy (n=proppy@88.171.43.213) Quit ("Leaving.")
  • [22:26:08] <jyelloz> http://beagleboard.org/static/BBSRM_latest.pdf
  • [22:30:11] * andersos_ (n=andersos@d991.ip15.netikka.fi) Quit (Remote closed the connection)
  • [22:31:18] * bmc_ (n=bmc@7-183-126-200.fibertel.com.ar) Quit (Read error: 110 (Connection timed out))
  • [22:31:49] * ant__ (n=andrea@host31-251-dynamic.8-87-r.retail.telecomitalia.it) has left #beagle
  • [22:32:29] * FuL|OUT is now known as fulgas
  • [22:46:10] * fischer1 (n=fischer1@fischerfamily.org) Quit (Remote closed the connection)
  • [22:49:36] * bmc_ (n=bmc@7-183-126-200.fibertel.com.ar) has joined #beagle
  • [22:50:16] * angstrom (n=angstrom@88.247.173.26) has joined #beagle
  • [22:51:41] * ElmiTheWizard (n=ElmiTheW@91.182.187.236) has joined #beagle
  • [22:52:07] <angstrom> hi is there any uboot that has no splash of beagleboard.org ? i just need binary to download its hard to compile sources codes
  • [22:52:12] <angstrom> ?
  • [22:53:32] <jyelloz> I have one from angstrom linux built. Do you want to try it?
  • [22:54:02] <angstrom> yea
  • [22:54:08] <angstrom> can you send it to web_
  • [22:54:09] <angstrom> ?
  • [22:54:11] <angstrom> uboot
  • [22:54:22] <jyelloz> Yeah I'll make it available in a few moments.
  • [22:54:23] <angstrom> without splash or beagleboard.org beagle logo
  • [22:54:40] <jyelloz> I don't know if it has anything. I haven't deployed it.
  • [22:54:51] <jyelloz> I just built it a week or so ago.
  • [22:55:02] <angstrom> latest uboot a week ago ?
  • [22:55:10] <angstrom> new uboot versions doesnt have logo
  • [22:55:15] <jyelloz> It's whatever angstrom linux comes with.
  • [22:55:20] <angstrom> uboot size?
  • [22:55:27] <angstrom> size of uboot file ?
  • [22:55:55] <jyelloz> 180k
  • [22:56:09] <angstrom> waow that seems what we want
  • [22:57:03] <angstrom> are you new on beagleboard too ?
  • [22:57:24] <jyelloz> Well I've had mine for about a year but I've been inactive for a while.
  • [22:57:46] <jyelloz> I have a rev B4 if that's any indication.
  • [22:57:46] <angstrom> ahh
  • [22:57:50] <angstrom> i c..
  • [22:57:57] <angstrom> np
  • [22:58:03] <angstrom> u send rapidshare?
  • [22:59:54] <angstrom> u send file thru rapidshare?
  • [23:01:56] <jyelloz> I don't know how to use that. Give me a moment, I'm adding some stuff to my web server.
  • [23:02:15] <angstrom> ok thnx alot...
  • [23:04:04] <jyelloz> ok, just tell me how it works because I'm interested in using it.
  • [23:04:32] <jyelloz> I'm working on a graduate school project that is lagging far behind.
  • [23:04:48] <jyelloz> I built it with bitbake and openembedded.
  • [23:05:18] <jyelloz> It sets up an entire environment for cross-compiling and packaging software.
  • [23:05:21] <angstrom> ahh i c
  • [23:05:35] <angstrom> uImage is same as uboot ?
  • [23:05:39] <jyelloz> No.
  • [23:05:43] <jyelloz> uImage is the linux kernel.
  • [23:05:51] <angstrom> uboot ?
  • [23:05:59] <jyelloz> u-boot is the bootloader.
  • [23:06:09] <jyelloz> Do you know how to deploy it?
  • [23:06:12] * surikatga (i=530a0bb0@gateway/web/freenode/x-rufbjcuhclvywigv) has joined #beagle
  • [23:06:50] <angstrom> i heard about codesourcery
  • [23:06:56] <angstrom> 2007q3
  • [23:07:02] <angstrom> we couldnt install it on our system
  • [23:07:23] <angstrom> it seems commercial
  • [23:07:31] <angstrom> any opensource solutions
  • [23:07:35] <jyelloz> Ok well bitbake/openembedded is probably the best solution for serious free development.
  • [23:08:19] <angstrom> i think
  • [23:08:47] <angstrom> r u using msn ?
  • [23:08:59] <jyelloz> no
  • [23:10:00] <angstrom> where is uboot located on sd card ? i ve looked and just saw uimage on my sdcard and linux path on other partition...
  • [23:10:09] <angstrom> there is no file named uboot
  • [23:10:22] <angstrom> i ll rename uboot to uimage ?
  • [23:10:30] <jyelloz> http://www.angstrom-distribution.org/building-angstrom
  • [23:10:46] <jyelloz> u-boot has to be placed on the NVRAM, I believe.
  • [23:12:13] <jyelloz> don't rename uboot to uimage.
  • [23:12:16] <jyelloz> They are different things.
  • [23:12:40] <booxter> you can place u-boot.bin to the card. then it will be chain-loaded by redboot (found in your nvram)
  • [23:12:48] <angstrom> hmm i c...
  • [23:13:07] <booxter> if there is no u-boot.bin then it loads generic stock u-boot found in nvram
  • [23:13:32] <angstrom> booxter , on FAt32 partition ?
  • [23:13:37] <angstrom> root of FAT32 ?
  • [23:13:56] <surikatga> Hello, it is possible to run SGX drivers under angstrom 2.6.29 ?
  • [23:13:59] <booxter> angstrom: yes, your first sd card partition
  • [23:14:06] <booxter> surikatga: yes
  • [23:14:17] <booxter> surikatga: that's what i do
  • [23:14:32] <angstrom> thnx
  • [23:15:27] <booxter> stock u-boot from nvram is a little obsolete and doesn't have some needed patches (f.e. usb networking doesn't work stable with it)
  • [23:15:35] <surikatga> booxter: thanks, im downloading .bin now and will try to build and install on target
  • [23:15:44] <booxter> but for bringup it's good enough
  • [23:16:00] <angstrom> is it possible to change nvram inside default u-boot ? if yes , how ?
  • [23:16:11] <jyelloz> yes.
  • [23:16:17] <jyelloz> I'll find the directions.
  • [23:16:30] * djlewis (i=41424c20@gateway/web/freenode/x-vfooxhqwqfnczlea) has joined #beagle
  • [23:17:12] <jyelloz> http://code.google.com/p/beagleboard/wiki/BeagleNANDFlashing
  • [23:17:31] <surikatga> booxter: does the opkg must be updated with "opkg update" to properly install the sgx package?
  • [23:17:55] <angstrom> nice...
  • [23:17:59] <surikatga> im asking coz i dont have internet connection for beagle yet
  • [23:19:19] <angstrom> btw , when i open angstrom it shows , login password gui , i want to show my own java swing/awt app on board begins.Where will i put my swing app on startup file ? /etc/init.d /????
  • [23:19:37] <angstrom> as soon as board starts it opens swing app instead of angstrom
  • [23:19:50] <angstrom> instead of login screen
  • [23:23:09] <jyelloz> you have to learn how to package software with bitbake and know a little about how to set up the startup sequence for unix systems.
  • [23:23:24] <jyelloz> And I didn't know they had java for ARM.
  • [23:23:28] <angstrom> guess so
  • [23:23:39] <angstrom> need to work on init seq
  • [23:24:15] * likewise_ (n=chatzill@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [23:24:20] <angstrom> what about cross conpiling things
  • [23:24:31] <jyelloz> All of this is handled by bitbake.
  • [23:24:43] <jyelloz> It's a lot of reading.
  • [23:26:15] * mrc_001 (n=mrc_001@d86-33-180-75.cust.tele2.at) Quit (Read error: 110 (Connection timed out))
  • [23:26:21] <angstrom> btw i have tried the file but it didnt boot
  • [23:26:29] <angstrom> what may go wrong
  • [23:28:00] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) Quit ("sl??n")
  • [23:28:16] <jyelloz> u-boot doesn't boot into linux.
  • [23:28:33] <jyelloz> It boots into u-boot, which can load linux or some other os.
  • [23:29:09] <angstrom> i want to load linux
  • [23:29:18] * javaJake (n=javaJake@unaffiliated/javajake) Quit ("leaving")
  • [23:29:20] <angstrom> without beagle logo
  • [23:29:46] <jyelloz> Ok so do you know if people are already doing this?
  • [23:29:54] <angstrom> upstream version of u=boot seemed the way
  • [23:30:52] <angstrom> doing this?
  • [23:30:55] <jyelloz> it might be the way. But it's possible that the beagle logo is happening before u-boot is loaded. I really don't know enough about the early startup to tell you if it's currently possble or how to do it.
  • [23:31:12] <jyelloz> Do you know if people are currently able to boot without the beagleboard logo?
  • [23:31:32] <angstrom> yep removed the sdcard and the beagle showed up
  • [23:32:03] <angstrom> but at least using the ups. ver. of u boot it may not appear
  • [23:32:40] <djlewis> angstrom: you have a lot of studying to do :)
  • [23:32:50] <jyelloz> ok. From where do you have this information? I'm full of outdated information on this topic.
  • [23:33:00] <angstrom> google forums
  • [23:33:16] <angstrom> should be a file 160 kb file
  • [23:33:27] <jyelloz> Ok. Well that's approximately what you got from me.
  • [23:33:31] * mrc_001 (n=mrc_001@212-183-113-244.adsl.highway.telekom.at) has joined #beagle
  • [23:34:12] <angstrom> rite
  • [23:35:11] <angstrom> java part is peace of cake but this consumes time
  • [23:35:32] <angstrom> boot seq recompile etc
  • [23:35:46] <jyelloz> I would recommend you get started with angstrom.
  • [23:35:52] <jyelloz> Are you running Linux?
  • [23:35:56] <angstrom> maybe board revision is different
  • [23:36:24] <angstrom> yep currently 2 machines win on netbook ubuntu on notebook angstrom on beagleboard
  • [23:36:35] <jyelloz> ok, good.
  • [23:36:45] * pfoetchen (n=pfoetche@dslb-094-217-199-253.pools.arcor-ip.net) has joined #beagle
  • [23:36:48] <jyelloz> So remember that building angstrom page?
  • [23:36:54] <jyelloz> http://www.angstrom-distribution.org/building-angstrom
  • [23:36:57] <angstrom> yep
  • [23:37:02] <angstrom> got it
  • [23:37:08] <angstrom> will read over
  • [23:37:30] <jyelloz> get Git first so you can checkout the package repository.
  • [23:37:38] <angstrom> not the elinux page
  • [23:37:44] * javaJake (n=javaJake@unaffiliated/javajake) has joined #beagle
  • [23:37:56] <jyelloz> Well this page worked for me.
  • [23:38:33] <angstrom> hmm
  • [23:39:13] * javaJake (n=javaJake@unaffiliated/javajake) Quit (Client Quit)
  • [23:39:31] * javaJake (n=javaJake@unaffiliated/javajake) has joined #beagle
  • [23:39:37] <jyelloz> I can give you all the files I built last week but if you want to keep current and get comfortable with developing, it would be beneficial to learn how to build it yourself.
  • [23:39:58] <angstrom> agreed
  • [23:39:59] <jyelloz> And you are going to need it if you want to package your own software on top of the distribution.
  • [23:40:41] <jyelloz> I'll give you the rootfs and the kernel if you want so you can start up a pretty recent angstrom distribution.
  • [23:41:02] <angstrom> would be greatfull
  • [23:41:28] <jyelloz> When you start, you get a shell on the serial terminal and a graphical interface if you plug in a monitor to the HDMI port.
  • [23:41:51] <jyelloz> Do you have the USB working so you can plug in a keyboard/mouse
  • [23:41:53] <jyelloz> ?
  • [23:41:59] <angstrom> the one on my sdcard goes to xwindows directly
  • [23:42:09] <angstrom> yep via usb hub
  • [23:42:15] <jyelloz> That's what mine does, too.
  • [23:42:35] <jyelloz> Let me try some stuff out on my board.
  • [23:43:12] <angstrom> it is connected to hdtv
  • [23:44:53] <jyelloz> I'm going to try to save the u-boot I just sent you on my beagle board to see what happens.
  • [23:45:00] <angstrom> ok
  • [23:49:46] <jyelloz> Actually I might have some problems because all the downloads at the google code site are for rev c and I have a B4.
  • [23:50:18] <jyelloz> Does anyone know if I can use the x-load stuff for rev c on my rev b4 board?
  • [23:51:27] <angstrom> hmm
  • [23:51:29] <angstrom> rev b4
  • [23:52:12] <angstrom> my rev is c2
  • [23:52:27] <jyelloz> well you're lucky
  • [23:52:44] <jyelloz> Mine only has a single USB and it's the tiny kind.
  • [23:53:00] * angstrom_tr (n=kayhan@88.247.173.26) has joined #beagle
  • [23:53:10] <angstrom> yo
  • [23:53:23] <angstrom_tr> hi
  • [23:54:08] <jyelloz> If you check out http://www.igep-platform.com/ there's a clone that has integrated bluetooth and 802.11 networking.
  • [23:54:29] <jyelloz> But it's not for sale yet. I'm going to replace mine with that.
  • [23:54:47] <angstrom> http://www.angstrom-distribution.org/building-angstrom
  • [23:55:16] <angstrom> package software with bitbake and know a little about how to set up the startup sequence for unix systems
  • [23:58:24] * killring (n=killring@adsl-76-226-111-164.dsl.sfldmi.sbcglobal.net) has joined #beagle
  • [23:59:11] <angstrom_tr> b??tbake is the chaintool as it seems on the page
  • [23:59:39] <angstrom_tr> but dont we need libs to get integreted with GCC to cross compile