• [00:01:27] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [00:03:56] * NishanthMenon (n=nMenon@nat/ti/x-befdc82dd77391b5) Quit ("A day without sunshine is like .... night")
  • [00:29:05] * BThompson (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) has joined #beagle
  • [00:40:58] <mru> sakoman: ping?
  • [01:00:49] * BThompson (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) Quit ("Trillian (http://www.ceruleanstudios.com")
  • [01:05:54] <nathan__> Anyone having any luck with linux-omap git? I rolled back to yesterday's git and it works fine, today's git hangs before printing the Linux Kernel banner.
  • [01:06:30] <mru> have you enabled DEBUG_LL?
  • [01:13:57] <nathan__> Nope, will try that.
  • [01:16:07] <nathan__> I'm wondering if they broke ttyS2 on the Beagleboard. They did change a lot about how timers and interrupts were set up.
  • [01:18:23] <mru> do you get the LED heartbeat?
  • [01:18:38] <mru> it is enabled by default on recent kernels
  • [01:19:01] <nathan__> No heartbeat. Both LEDs stay on.
  • [01:19:16] <mru> then more than rs232 is broken
  • [01:19:23] * bullwood42 (n=bullwood@adsl-99-171-171-142.dsl.aus2tx.sbcglobal.net) has joined #beagle
  • [01:19:33] <mru> anything from DEBUG_LL?
  • [01:19:34] <nathan__> Just confirmed I have CONFIG_LEDS_TRIGGER_HEARTBEAT=y
  • [01:19:40] <nathan__> Still waiting for it to compile.
  • [01:19:45] <mru> ok
  • [01:19:59] <nathan__> Copying now. One minute.
  • [01:21:39] <nathan__> Awesome. Lotsa stuff now.
  • [01:21:58] <mru> anything nasty-looking?
  • [01:22:33] <nathan__> Null pointer at [<c00205d0>] (musb_platform_init+0x0/0x140) from [<c001fb64>] (musb_probe+0x200)
  • [01:22:42] <nathan__> Let me back out my musb patches and try again.
  • [01:24:51] * rsalveti (n=salveti@189.70.78.181) has joined #beagle
  • [01:25:24] * _aleph (n=aleph@trinity.develer.com) Quit ("leaving")
  • [01:26:37] <nathan__> I feel like an idiot. It was one of my MUSB patches. Boots fine now.
  • [01:26:45] <nathan__> Thanks for your help Mans!
  • [01:26:53] <mru> no problem
  • [01:27:26] <mru> if only I could figure out what's causing i2c errors in u-boot
  • [01:28:06] <mru> at least I got it to detect the full 256MB ram
  • [01:28:25] <nathan__> What's your altitude? Maybe it's alpha particle radiation.
  • [01:28:46] <mru> I'm nowhere near the LHC...
  • [01:28:50] <nathan__> Hehe.
  • [01:29:06] <thephilosopher> the pandora sold out
  • [01:29:17] * mru wonders how long lhc jokes will be going
  • [01:29:28] <nathan__> Until they finally get it to work I guess.
  • [01:29:51] <nathan__> So if there is a B6 with ES3.0, will it also have 256MB DRAM?
  • [01:30:08] <mru> yeah, 'cause when they do, we're all doomed
  • [01:30:22] <mru> I've heard of no plans for a B6
  • [01:30:27] <mru> doesn't mean there are none
  • [01:30:55] <mru> rev C might be available with two ram options
  • [01:31:06] <mru> good thing I got auto-detection working...
  • [01:31:40] <nathan__> koen said if rev C takes a while there is a plan B to release ES3.0 with rev B.
  • [01:31:56] <mru> sounds reasonable
  • [01:32:00] <nathan__> I would be very happy with 256MB. Some stuff I've been doing is scraping up against 128MB.
  • [01:32:57] <mru> they've probably stopped making ES2.1 silicon, or will do so shortly
  • [01:33:47] <mru> I can't think of any reason to keep making chips with known bugs when the new version is compatible in every way
  • [01:34:36] <mru> but second-guessing big companies is risky stuff
  • [01:35:27] <mru> sakoman and other u-boot wizards: please check my changes at http://git.mansr.com/?p=u-boot;a=summary
  • [01:35:59] <mru> it seems to work... now you tell me what I should have done differently
  • [01:36:53] <mru> nathan__: what are you planning to use the beagle for?
  • [01:36:56] <mru> just curious...
  • [02:12:37] <Crofton|work> NOTE: package libgnomeui-2.24.0: completed
  • [02:12:37] <Crofton|work> NOTE: Tasks Summary: Attempted 1539 tasks of which 0 didn't need to be rerun and 0 failed.
  • [02:16:06] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Remote closed the connection)
  • [02:16:46] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [02:34:43] * rsalveti (n=salveti@189.70.78.181) Quit (Read error: 110 (Connection timed out))
  • [02:39:50] * calculu5 (n=calculus@gentoo/user/calculus) has joined #beagle
  • [02:43:45] * rsalveti (n=salveti@189.70.63.132) has joined #beagle
  • [02:49:43] * bullwood42 (n=bullwood@adsl-99-171-171-142.dsl.aus2tx.sbcglobal.net) has left #beagle
  • [02:54:33] * calculus (n=calculus@gentoo/user/calculus) Quit (Read error: 110 (Connection timed out))
  • [02:59:49] <thephilosopher> any date for rev C ?
  • [03:10:38] <TangerineTriode> Crofton: do you know OSS?
  • [03:12:12] * rsalveti (n=salveti@189.70.63.132) Quit (Read error: 101 (Network is unreachable))
  • [03:12:38] * jrmuizel_ (n=jrmuizel@173.33.210.62) has joined #beagle
  • [03:28:55] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Read error: 110 (Connection timed out))
  • [03:29:40] * jrmuizel_ (n=jrmuizel@173.33.210.62) Quit (Remote closed the connection)
  • [03:46:12] * slothlove (n=srussell@user-387ggve.cable.mindspring.com) has joined #beagle
  • [03:48:43] * TangerineTriode is now known as TangerineTetrode
  • [03:53:50] * Olipro_ (n=Olipro@uncyclopedia/Olipro) has joined #beagle
  • [04:10:55] * Olipro (n=Olipro@uncyclopedia/Olipro) Quit (Read error: 110 (Connection timed out))
  • [04:13:55] * Olipro_ is now known as Olipro
  • [04:16:10] * rsalveti (n=salveti@189.70.254.7) has joined #beagle
  • [04:25:50] * slothlove (n=srussell@user-387ggve.cable.mindspring.com) Quit ("Leaving.")
  • [04:25:53] * slothlove (n=srussell@user-387ggve.cable.mindspring.com) has joined #beagle
  • [04:33:30] * nooomem (n=chatzill@ip68-100-201-32.dc.dc.cox.net) has joined #Beagle
  • [04:42:43] <nathan__> mru: I have a research robot using a heavy PC for computer vision that I would like to replace with the Beagleboard.
  • [04:44:16] <geist> what klind of cpu requirements do you have for it?
  • [04:44:31] <geist> though the cortex is fast, it's still going to be many times slower than a core2 or so
  • [04:45:58] <ds2> the dsp could help there
  • [04:48:06] <nathan__> The CPU requirements aren't that high. I was using a Via and more recently an Atom. Neither one is a Core 2.
  • [04:48:47] <nathan__> And ds2 is right -- the front end fits well on a DSP because it is all integer MACs working on regular arrays.
  • [04:49:55] <ds2> what are you using as sensors?
  • [04:54:53] <nathan__> USB cameras and a USB sensor board that interfaces to a 6-axis IMU and position and force sensors.
  • [04:55:57] <nathan__> It is nice to go from 24W to 2W on a battery-powered robot.
  • [04:56:15] <ds2> heh indeed
  • [04:58:03] <nathan__> The only downside with the BB right now is that the MUSB drivers still have kinks to be worked out. But Ajay Gupta has been amazing with that.
  • [04:58:28] * slothlove (n=srussell@user-387ggve.cable.mindspring.com) Quit (Read error: 110 (Connection timed out))
  • [04:58:50] <ds2> if you need something working, use an older kernel
  • [04:59:40] <nathan__> Older kernels don't have high speed isochronous support in musb so the cameras won't work.
  • [04:59:59] <ds2> ah
  • [05:01:21] * Olipro (n=Olipro@uncyclopedia/Olipro) Quit (Read error: 104 (Connection reset by peer))
  • [05:01:41] <nathan__> I was afraid I would have to wait for Rev C with EHCI to host all this USB stuff, but MUSB is there now. Just a bug or two left.
  • [05:01:58] * Olipro (i=Olipro@uncyclopedia/Olipro) has joined #beagle
  • [05:02:25] <ds2> or start with a slower camera so you don't need HS ISO
  • [05:05:18] <nathan__> For some reason the cameras I have here won't send uncompressed frames in FS mode. Maybe they don't have the memory to buffer a full frame, so they have to stream HS.
  • [05:06:40] <ds2> ah
  • [05:14:49] * bazbell (n=a0192809@nat/ti/x-90fca0a721f7fec7) Quit ("Leaving.")
  • [05:28:21] * nathan__ (n=nathan@adsl-69-106-228-95.dsl.pltn13.pacbell.net) Quit (Read error: 113 (No route to host))
  • [05:29:34] * nathan_ (n=nathan@adsl-69-106-228-95.dsl.pltn13.pacbell.net) has joined #beagle
  • [05:58:00] * jess (n=jess@117.195.132.22) has joined #beagle
  • [06:53:53] * methril|gone is now known as methril|meeting
  • [06:54:59] * RogerMonk (n=a0740758@nat/ti/x-90ff5fc7de7a7a4d) has joined #beagle
  • [07:00:22] * koen (n=koen@s55917625.adsl.wanadoo.nl) Quit ("Reconnecting")
  • [07:07:22] * ldesnogu (n=ldesnogu@fw-tnat.cambridge.arm.com) Quit ("Leaving")
  • [07:12:18] * koen (n=koen@85.145.118.37) has joined #beagle
  • [07:16:33] * pbrook_ (n=paul@78-105-115-80.zone3.bethere.co.uk) has joined #beagle
  • [07:16:41] * pbrook (n=paul@78-105-115-80.zone3.bethere.co.uk) Quit (Read error: 110 (Connection timed out))
  • [07:33:45] * igor321 (n=igor@170-236.dsl.iskon.hr) has joined #beagle
  • [08:03:44] * zedstar (n=john@82-44-200-69.cable.ubr08.haye.blueyonder.co.uk) has joined #beagle
  • [08:03:50] * koen_ (n=koen@s55917625.adsl.wanadoo.nl) has joined #beagle
  • [08:04:09] * koen (n=koen@85.145.118.37) Quit (Nick collision from services.)
  • [08:04:23] * koen_ is now known as koen
  • [08:09:09] <mru> morning
  • [08:09:20] <mru> koen: you around?
  • [08:11:34] <koen> yes
  • [08:11:50] <koen> -b 180 rocks with omapfbplay :)
  • [08:11:59] <mru> ah, you found the u-boot changes
  • [08:12:11] <koen> yes and they work
  • [08:12:16] <mru> did you see I made a kernel change too?
  • [08:12:21] <koen> I also applied th vmalloc patch
  • [08:16:04] <mru> are you using latest u-boot git, or did you apply the patches to an older version
  • [08:20:37] <koen> steves 'common' branch from last week or so
  • [08:20:57] <koen> uboot report 2008.10rc IIRC
  • [08:21:16] <mru> 2008.10-rc2 here
  • [08:21:31] <mru> I'm getting some weird error messages
  • [08:21:36] <mru> timed out in wait_for_bb: I2C_STAT=1000
  • [08:21:42] <mru> timed out in wait_for_pin: I2C_STAT=1000
  • [08:21:49] <mru> I2C read: I/O error
  • [08:21:56] <mru> various combinations of those
  • [08:22:01] <koen> I used to get those as well with the TI one
  • [08:22:22] <koen> it was solved by not using a divisor of '1' and decrementing it in uboot
  • [08:22:33] <mru> where?
  • [08:22:58] <koen> the fix should al;ready by in your uboot
  • [08:23:02] <koen> be*
  • [08:23:07] <mru> hmm
  • [08:23:15] <mru> must be something else then
  • [08:23:25] <mru> it still mostly works
  • [08:23:33] <mru> sometimes it hangs reading mmc
  • [08:40:42] * igor321 (n=igor@170-236.dsl.iskon.hr) Quit ("leavin'")
  • [08:41:33] <koen> heh
  • [08:41:50] <koen> the james bond trailer is a bit more demanding on the beagle than bigbuck bunny :)
  • [08:45:33] <koen> mru: http://www.bat.org/~tomba/git/linux-omap-dss.git/
  • [08:47:14] * dcordes (n=dcordes@unaffiliated/dcordes) has joined #beagle
  • [08:47:17] * zedstar (n=john@82-44-200-69.cable.ubr08.haye.blueyonder.co.uk) Quit (Remote closed the connection)
  • [08:49:01] * GAN800 (n=GeneralA@c-69-244-211-19.hsd1.fl.comcast.net) has joined #beagle
  • [09:05:30] * GeneralAntilles (n=GeneralA@pdpc/supporter/active/generalantilles) Quit (Read error: 110 (Connection timed out))
  • [09:16:45] * nathan_ (n=nathan@adsl-69-106-228-95.dsl.pltn13.pacbell.net) Quit (Read error: 113 (No route to host))
  • [09:17:51] * jess (n=jess@117.195.132.22) has left #beagle
  • [09:29:37] * ldesnogu (n=ldesnogu@fw-tnat.cambridge.arm.com) has joined #beagle
  • [09:55:09] * zedstar (n=john@net26-100.tvu.ac.uk) has joined #beagle
  • [10:00:21] * sweetlilmre|away is now known as sweetlilmre
  • [10:01:03] <sweetlilmre> gm, anyone know why I am getting this: http://pastebin.com/d2c9b34d1 on a git pull against org.openembedded.dev ?
  • [10:03:17] <koen> yes, the master branch vanished
  • [10:03:53] <sweetlilmre> oh... have you found it yet? :)
  • [10:04:26] <sweetlilmre> or is there another branch I should be looking at?
  • [10:08:19] * TAK2004 (n=Administ@dslb-088-072-196-106.pools.arcor-ip.net) has joined #beagle
  • [10:09:58] <koen> org.openembedded.dev
  • [10:10:12] <koen> I didn't know that git defaulted to a bogus 'master' branch
  • [10:10:50] <sweetlilmre> koen: um alright. being a total git n00b, how do I switch to the branch?
  • [10:11:11] * weiles (n=quassel@HSI-KBW-085-216-094-061.hsi.kabelbw.de) Quit (Read error: 110 (Connection timed out))
  • [10:11:15] <kulve> git checkout branchname
  • [10:12:10] <sweetlilmre> error: pathspec 'org.openembedded.dev' did not match any file(s) known to git.
  • [10:12:11] <sweetlilmre> Did you forget to 'git add'?
  • [10:22:13] <koen> plan B is just to a clone from scratch
  • [10:24:04] <sweetlilmre> that would suck
  • [10:25:04] <sweetlilmre> surely I can switch branches somehow?
  • [10:33:27] * thephilosopher (n=chatzill@modemcable108.47-58-74.mc.videotron.ca) Quit ("ChatZilla 0.9.83 [Firefox 3.0.3/2008092417]")
  • [11:00:48] * zedstar (n=john@net26-100.tvu.ac.uk) Quit (Read error: 110 (Connection timed out))
  • [11:09:24] * zedstar (n=john@net26-100.tvu.ac.uk) has joined #beagle
  • [11:10:04] * dcramer (n=davec@dcdsl.ebox.com) Quit ()
  • [11:15:50] * dcramer (n=davec@dcdsl.ebox.com) has joined #beagle
  • [11:35:37] * GAN800 is now known as GeneralAntilles
  • [11:36:17] <Crofton|work> libgnomeui built for me
  • [11:36:27] <Crofton|work> any other packages with issues?
  • [11:37:10] <sweetlilmre> no everything after that built fine, until koen killed the master branch.. now starting from scratch again :)
  • [11:37:20] <Crofton|work> well
  • [11:37:26] <Crofton|work> he didn't kill it :)
  • [11:37:51] <Crofton|work> the people doing the update from mtn stopped updating that branch
  • [11:38:02] <sweetlilmre> okay well whoever did. its good exercise and I'll see if I catch any other issues
  • [11:38:07] <Crofton|work> heh
  • [11:38:13] <Crofton|work> good attitude
  • [11:38:21] <sweetlilmre> gotta roll with the punches :)
  • [11:38:23] <Crofton|work> some people just get angry when things go "wrong"
  • [11:38:32] <sweetlilmre> I ate a pizza instead
  • [11:39:11] <sweetlilmre> I could probably have switched to the new branch, but git has me totally confused
  • [11:39:56] <sweetlilmre> so the missing dep. I mentioned, was not a missing dep? (gdk-pixbuf-csource-native)
  • [11:41:59] <Crofton|work> I did bitbake libgnomeui and it built
  • [11:42:03] <Crofton|work> mabye it was fixed
  • [11:42:21] <Crofton|work> maybe there is another path to build that causes issues :)
  • [11:42:25] <sweetlilmre> from scratch?
  • [11:42:30] <Crofton|work> yes
  • [11:42:50] <sweetlilmre> hmm okay well I will see now, just started on beagleboard-demo-image
  • [11:43:27] <sweetlilmre> but then again... didn't clean the work area. so probably won't catch anything
  • [11:45:03] <sweetlilmre> oh boy.. "Running task 524 of 6138" :)
  • [11:49:07] <Crofton|work> you did enabel || mkae ?
  • [11:55:36] <sweetlilmre> no I found out that andLinux doesn't support multicore. (sorry my kid hurt himself so I had to so some comforting :))
  • [11:55:46] <sweetlilmre> does || make use threads?
  • [11:55:57] <Crofton|work> not sure
  • [11:56:10] <Crofton|work> heh
  • [11:56:15] <Crofton|work> kids are funny like that
  • [11:56:26] <sweetlilmre> jumping on the trampoline with his friend :)
  • [11:56:34] <Crofton|work> koen, I gather l-o git does not quite work yet
  • [11:56:38] <Crofton|work> heh
  • [11:57:37] <koen> Crofton|work: the l-o git recipe in OE works great
  • [11:57:58] <koen> I'm using it as my standard kernel on the beagle
  • [11:58:03] <Crofton|work> yeah, I am hoping we can bump the rec soon
  • [11:58:14] <koen> Clocking rate (Crystal/DPLL/ARM core): 26.0/332/600 MHz
  • [11:58:15] <sweetlilmre> koen: sorry about the false accusation :)
  • [11:58:20] <Crofton|work> hasn't check to see if this happened yet :)
  • [11:58:21] <koen> Memory: 128MB 128MB = 256MB total
  • [11:58:22] <koen> Memory: 255104KB available (3976K code, 361K data, 172K init)
  • [11:58:47] <koen> mru and I seem to have super beagles :)
  • [11:59:04] <Crofton|work> this git business is almost as confusing as the finance news this week
  • [11:59:10] <Crofton|work> heh
  • [11:59:16] <Crofton|work> 4 bit bytes?
  • [11:59:37] <koen> Crofton|work: git can't be confusing, that's what people told me
  • [11:59:47] <koen> it is supposed to cure world hunger and stuff
  • [12:00:25] <Crofton|work> heh
  • [12:00:49] <Crofton|work> on the other hand, people flock to it before it is even ready
  • [12:00:52] <sweetlilmre> git clone git://700bn.bailout.plan ?
  • [12:00:55] <koen> I'm having a mild "told you so" moment
  • [12:01:02] <Crofton|work> consumers are crazy
  • [12:01:48] <Crofton|work> the patch you pushed has no impact on people with normal beagles?
  • [12:02:51] <koen> nope
  • [12:03:05] <koen> see kevins reaction on l-o ml
  • [12:03:17] <Crofton|work> I haven't got that far ....
  • [12:03:31] <Crofton|work> still injecting coffee
  • [12:03:42] <sweetlilmre> where can I find these mailing lists?
  • [12:03:47] <Crofton|work> hmm, I am late
  • [12:03:54] <koen> beagle demo image is almost done building with the staging changes
  • [12:04:04] <Crofton|work> http://rafb.net/p/NocOE248.html
  • [12:04:21] <suihkulokki> sweetlilmre: http://news.gmane.org/gmane.linux.ports.arm.omap
  • [12:04:22] <koen> http://news.gmane.org/gmane.linux.ports.arm.omap/cutoff=12310
  • [12:04:33] <sweetlilmre> thanks
  • [12:05:08] <koen> Crofton|work: so your cpu is idling about 77% of the time
  • [12:08:55] <Crofton|work> when I run my sdr program I get some weird results
  • [12:09:05] <Crofton|work> I was comparing with mplayer
  • [12:10:15] <Crofton|work> http://rafb.net/p/oa0zvy43.html
  • [12:11:40] <koen> is that over nfs or something?
  • [12:12:23] <Crofton|work> no
  • [12:12:38] <Crofton|work> it is reading data from sd card
  • [12:12:53] <Crofton|work> mabye I should move that to ramdisk
  • [12:13:24] <Crofton|work> once I am in gear, I need to try more things
  • [12:13:32] * fagius (n=fagius@static-71-111-254-119.rlghnc.dsl-w.verizon.net) has joined #beagle
  • [12:13:41] <Crofton|work> playing with oprofile is fun
  • [12:14:38] * montamer (n=vijay@203.199.213.3) has joined #beagle
  • [12:20:56] * feig (n=ejf3@189.sub-70-198-140.myvzw.com) has joined #beagle
  • [12:30:13] * t_s_o (n=tso@135.84-49-129.nextgentel.com) has joined #beagle
  • [12:44:13] * feig1 (n=ejf3@90.sub-75-223-235.myvzw.com) has joined #beagle
  • [12:48:04] * feig (n=ejf3@189.sub-70-198-140.myvzw.com) Quit (Operation timed out)
  • [12:49:14] * feig1 (n=ejf3@90.sub-75-223-235.myvzw.com) Quit (Remote closed the connection)
  • [12:50:52] * ali_as_ (n=ali_as@ambix.plus.com) Quit ("Later!")
  • [12:51:17] * slothlove (n=srussell@user-387ggve.cable.mindspring.com) has joined #beagle
  • [12:56:52] * felipec (i=c0647cda@gateway/web/ajax/mibbit.com/x-6f442640ea67613b) has joined #beagle
  • [12:58:49] * feig1 (n=ejf3@2.sub-75-193-188.myvzw.com) has joined #beagle
  • [12:59:29] * zedstar (n=john@net26-100.tvu.ac.uk) Quit (Remote closed the connection)
  • [13:02:35] <sweetlilmre> Crofton|work: back on track but build fails on gnome-games aisleriot
  • [13:03:25] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [13:07:30] * NishanthMenon (n=nMenon@nat/ti/x-77657083362f865f) has joined #beagle
  • [13:07:46] <sweetlilmre> I think this is why: http://gitweb.openembedded.net/?p=org.openembedded.dev.git;a=commitdiff;h=e56c661a3cffba7c1c8f2ffc68a6f4f582bf1927;hp=2ffc61952d87fecf8edc49f0af05b86f66b5408b
  • [13:08:57] * montamer (n=vijay@203.199.213.3) Quit (Remote closed the connection)
  • [13:09:28] * montamer (n=vijay@203.199.213.3) has joined #beagle
  • [13:12:41] * igor321 (n=igor@208-125.dsl.iskon.hr) has joined #beagle
  • [13:14:22] <Crofton|work> http://bugs.openembedded.net/show_bug.cgi?id=4585
  • [13:14:32] <Crofton|work> can you attach the config.log to this bug
  • [13:14:40] <Crofton|work> I will be out until after lunch
  • [13:16:04] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [13:18:00] * bazbell (n=a0192809@nat/ti/x-fbc11a360903ca16) has joined #beagle
  • [13:18:18] * prpplague (n=dave@mail.americanmicrosystems.com) has joined #beagle
  • [13:20:24] * rsalveti (n=salveti@189.70.254.7) Quit (Remote closed the connection)
  • [13:22:04] <sweetlilmre> sure, just have to create an account etc. also checking that a rebuild doesn't fix it
  • [13:29:25] <sweetlilmre> Crofton|work: config.log from gnome-games-2.24.0 added to the bug report
  • [13:29:39] <sweetlilmre> Crofton|work: rebuild did not fix it
  • [13:33:39] <Crofton|work> thanks
  • [13:34:23] <sweetlilmre> Crofton|work: no worries, I am temporarily disabling aisleriot to see how the rest of the image goes in the mean time
  • [13:35:14] <Crofton|work> bother Geof is having libgweather issues
  • [13:35:24] <kulve> felipec: I'm having problems with the omx_mpeg4dec and with omapfbsink
  • [13:35:45] <felipec> kulve: what kind of problems?
  • [13:35:59] <Crofton|work> kulve, in OE?
  • [13:38:52] <sakoman> Crofton|work: I tried clean builds on both machines last night. both fail on gnome-games, but for different reasons :-)
  • [13:39:34] <sakoman> the amd64 fails because it still seems to think it can't find pthread.h (though it is in staginf)
  • [13:40:36] <sakoman> the other machine (32 bit distro on amd64) fails due to an undefined reference in aisleriot
  • [13:40:48] * shoragan (n=shoragan@debian/developer/shoragan) Quit (Read error: 110 (Connection timed out))
  • [13:41:14] * sakoman thinks gnome-games is cursed
  • [13:41:31] * sweetlilmre thinks aisleriot is cursed :)
  • [13:43:19] <koen> sakoman: I think I have a fix for your pthread.h problem
  • [13:44:01] <sakoman> koen: you are my hero :-)
  • [13:44:16] <sakoman> I need to waste time playing solitaire!
  • [13:45:07] <koen> I suspect it fixes the guile.h problem as well
  • [13:45:10] * jrmuizel (n=jrmuizel@bas19-toronto12-1167855509.dsl.bell.ca) has joined #beagle
  • [13:45:26] <koen> sakoman: gnomegames includes the same broken ggz.m4 as ggz-client libs
  • [13:45:36] <koen> sakoman: so I could reuse the patch for that :)
  • [13:46:18] <sakoman> Crofton|work: if you end up going to AZ: http://www.heartattackgrill.com/news.html
  • [13:47:14] <koen> "The Government Requires Us To Inform You That Our "Nurses" Do Not Actually Have Any Accredited Medical Training"
  • [13:47:52] * slothlove1 (n=srussell@user-387ggve.cable.mindspring.com) has joined #beagle
  • [13:48:54] <kulve> Crofton|work: no :)
  • [13:49:49] <kulve> felipec: what gst-launch command do you use?
  • [13:50:19] <kulve> my pipeline gets to "Pipeline is PREROLLING ..." but then nothing
  • [13:50:25] * igor321 (n=igor@208-125.dsl.iskon.hr) Quit ("leavin'")
  • [13:50:30] <kulve> I doubt my DSP stuff is properly set up
  • [13:51:32] * slothlove2 (n=srussell@user-387ggve.cable.mindspring.com) has joined #beagle
  • [13:52:37] * slothlove3 (n=srussell@user-387ggve.cable.mindspring.com) has joined #beagle
  • [13:52:38] <Crofton|work> bbl, need to have the phy therapy guys re-evaluate my shoudler ...
  • [13:53:12] * BThompson (n=BThompso@nat/ti/x-79d3b040b0d8c127) has joined #beagle
  • [13:56:12] * slothlove4 (n=srussell@user-387ggve.cable.mindspring.com) has joined #beagle
  • [13:56:49] * nooomem (n=chatzill@ip68-100-201-32.dc.dc.cox.net) Quit (Read error: 110 (Connection timed out))
  • [13:57:06] * shoragan (n=shoragan@debian/developer/shoragan) has joined #beagle
  • [13:57:40] * slothlove3 (n=srussell@user-387ggve.cable.mindspring.com) Quit (Read error: 104 (Connection reset by peer))
  • [13:57:52] * Openfree (n=df@222.65.132.11) Quit (Remote closed the connection)
  • [14:00:06] * alecrim (n=alecrim@200.184.118.132) has joined #beagle
  • [14:03:13] * Openfree (n=df@222.65.132.11) has joined #beagle
  • [14:03:42] * slothlove (n=srussell@user-387ggve.cable.mindspring.com) Quit (Read error: 110 (Connection timed out))
  • [14:07:56] * slothlove1 (n=srussell@user-387ggve.cable.mindspring.com) Quit (Read error: 110 (Connection timed out))
  • [14:09:10] * slothlove2 (n=srussell@user-387ggve.cable.mindspring.com) Quit (Read error: 110 (Connection timed out))
  • [14:12:32] <sweetlilmre> koen: gnome-games still broken with your patch
  • [14:12:32] * JuanG (n=Juan@nat/ti/x-bd290d12bdcbfb6b) has joined #beagle
  • [14:12:58] * JuanG (n=Juan@nat/ti/x-bd290d12bdcbfb6b) has left #beagle
  • [14:14:59] <koen> it fails in do_compile now?
  • [14:15:43] <sweetlilmre> koen: same place as before (used to configure fine as well): | sol-game.o: In function `aisleriot_game_generate_exception':
  • [14:15:43] <sweetlilmre> | game.c:(.text+0x128): undefined reference to `scm_internal_stack_catch'
  • [14:15:43] <sweetlilmre> | game.c:(.text+0x134): undefined reference to `scm_c_eval_string'
  • [14:16:37] <sweetlilmre> etc.
  • [14:17:09] <koen> right
  • [14:17:51] <sweetlilmre> koen: you need a config.log or anything?
  • [14:18:22] * nooomem (n=chatzill@129.174.106.5) has joined #Beagle
  • [14:25:15] <koen> no, I think I know where the problem is
  • [14:26:50] * TAK2004 (n=Administ@dslb-088-072-196-106.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [14:30:39] * TAK2004 (n=Administ@dslb-088-072-196-106.pools.arcor-ip.net) has joined #beagle
  • [14:34:01] <felipec> kulve: I usually test with: gst-launch-0.10 filesrc location=foo.avi ! avidemux ! omx_mpeg4dec ! omapfbsink
  • [14:34:38] * jess (n=jess@117.195.140.197) has joined #beagle
  • [14:34:40] <felipec> kulve: you can replace omapfbsink with fakesink for starters
  • [14:35:05] <felipec> kulve: and before you can do: export GST_DEBUG=omx:5 and send me the output
  • [14:37:12] * Beagle2 (n=Beagle2@ip68-8-216-53.sd.sd.cox.net) has joined #beagle
  • [14:37:56] * Beagle2 (n=Beagle2@ip68-8-216-53.sd.sd.cox.net) Quit (Client Quit)
  • [14:38:08] * Beagle9 (n=Beagle9@ip68-8-216-53.sd.sd.cox.net) has joined #beagle
  • [14:38:22] * Beagle9 (n=Beagle9@ip68-8-216-53.sd.sd.cox.net) Quit (Client Quit)
  • [14:39:34] * nooomem (n=chatzill@129.174.106.5) Quit (Read error: 110 (Connection timed out))
  • [14:40:13] <kulve> felipec: I'll test that later. Have you modifiex the gst-omx in anyway? I'm using the latest release (and I provide the omx library name to the omx_mpeg4dec.
  • [14:40:26] * rsalveti (n=salveti@200.184.118.132) has joined #beagle
  • [14:40:55] <kulve> with fakesink and ximagesink iget the prerolling state but with omapfb it always fails directly..
  • [14:41:35] <kulve> sorry for typos, I'm on n810..
  • [14:42:15] * methril|meeting is now known as methril
  • [14:42:40] <felipec> kulve: hmm, you don't need to modify anything, but maybe the name of the components by default are not updated... gst-inspect-0.10 omx_mpegdec should output the 'component-name' property.
  • [14:43:39] <kulve> That's what I'm using
  • [14:44:22] <kulve> I'll get the logs to you when I'm back at beagle
  • [14:44:37] * zedstar (n=john@82-44-200-69.cable.ubr08.haye.blueyonder.co.uk) has joined #beagle
  • [14:45:20] <felipec> kulve: not gst-launch, gst-inspect... to find out the configuration... by default it's using bellagio component names, but you can change it at run-time
  • [14:45:48] <kulve> yeah, and that's what I'm doing :)
  • [14:46:25] <felipec> kulve: so you know the component-name?
  • [14:46:44] <kulve> omapfb is another issue I think. I can't get it working even with testsrc
  • [14:47:20] <kulve> yes, I know the component name (I think). omx.ti.vieodecoder or something like that..
  • [14:48:03] <felipec> kulve: I had to patch the kernel for omapfb to work with YUV output
  • [14:48:22] <felipec> kulve: ah, I see, then it should work =/
  • [14:48:29] <kulve> I took all patches from OE couple of days ago
  • [14:49:14] <kulve> is there some ways I can check if bridge is workin?
  • [14:49:42] <felipec> kulve: yes, there's a ping application TI is providing
  • [14:49:54] <kulve> bbl
  • [14:52:05] <felipec> kulve: http://groups.google.com/group/beagleboard/browse_thread/thread/be4d5f55bd4f8b19/9f094c37bd9beadd?lnk=gst&q=How+to+get+DSP+working+in+beagleboard%3F#9f094c37bd9beadd
  • [14:52:32] <felipec> the binary is here: https://omapzoom.org/gf/download/frsrelease/132/632/dspbridge_binaries.tar.bz2
  • [14:52:46] * koen stabs guile
  • [14:53:28] <koen> Crofton|work, sweetlilmre: guile problem should be gone
  • [14:54:44] <sweetlilmre> koen: checking now :)
  • [15:03:36] <kulve> felipec: I've patched the kernel and configure it with the 14M setting (it's found from the linux.onarm.com site as well as the patched kernel sources)
  • [15:04:25] * methril is now known as methril|gone
  • [15:06:23] <koen> prpplague: there's a flyswatter on my desk now :)
  • [15:06:34] <prpplague> koen: fun fun
  • [15:06:39] <prpplague> koen: you got the adapters too?
  • [15:08:49] <kulve> felipec: the omapfb failure: http://tuomas.kulve.fi/tmp/fail-omapfb.log
  • [15:08:53] <koen> prpplague: yes
  • [15:10:24] <sweetlilmre> koen: NOTE: package gnome-games-2.24.0-r1: task do_compile: completed :))))
  • [15:11:52] <kulve> felipec: http://tuomas.kulve.fi/tmp/fail-omx.log
  • [15:11:53] <prpplague> koen: let me know what you think
  • [15:12:01] <kulve> felipec: but I think those logs doesn't say much..
  • [15:13:17] <felipec> kulve: can you also paste the output of gst-inspect of those elements?
  • [15:14:26] <kulve> omapfb: http://pastebin.com/m25f58ceb
  • [15:15:28] <kulve> omx_mpeg4dec: http://pastebin.com/d3c02d50
  • [15:15:38] <koen> prpplague: will do
  • [15:15:50] <felipec> kulve: it's omapfbsink, omapfb is the plugin
  • [15:16:03] * feig (n=ejf3@61.sub-75-194-43.myvzw.com) has joined #beagle
  • [15:16:10] <kulve> sry :)
  • [15:16:35] <kulve> http://pastebin.com/m71262d99
  • [15:16:55] <felipec> kulve: ok, gst-openmax is using the bellagio components, I need to create a branch with the TI ones by default, but in the meantime:
  • [15:17:18] <kulve> gst-launch gnomevfssrc location=/root/big_buck_bunny_480p_surround-fix.avi ! avidemux ! omx_mpeg4dec library-name=/lib/libOMX_Core.so component-name=OMX.TI.Video.Decoder ! fakesink
  • [15:17:31] <kulve> that's how I run it
  • [15:18:40] <kulve> and all it prints is:
  • [15:18:41] <kulve> Setting pipeline to PAUSED ...
  • [15:18:42] <kulve> Pipeline is PREROLLING ...
  • [15:20:03] <felipec> kulve: aha, I don't remember documenting that component-name stuff, good catch :)
  • [15:21:18] <felipec> kulve: regarding the omapfbsink it looks really weird, because the caps clearly mention UYVY on gst-inspect, and on the log it says omapfbsink0:(any)
  • [15:21:55] <kulve> # gst-launch-0.10 -v videotestsrc ! omapfbsink
  • [15:21:58] <kulve> ERROR: Pipeline doesn't want to pause.
  • [15:22:10] <felipec> kulve: and regarding the mpeg4dec I think maybe the DSP binaries provided by TI are not up to date =/
  • [15:22:35] <kulve> didn't you use the provided binary..?
  • [15:23:06] <kulve> how can I test the DSP ping? Is it described on some wiki pagE?
  • [15:24:27] <felipec> kulve: Hiroshi described in that mail, I'll add it to the wiki
  • [15:28:22] <felipec> kulve: done, regarding the omapfb, do you have the overlay setup? /dev/fb1?
  • [15:28:40] <kulve> no :/
  • [15:28:56] <kulve> felipec: page url?
  • [15:29:17] <felipec> kulve: for the wiki stuff? http://elinux.org/BeagleBoard/DSP_Howto
  • [15:29:31] <kulve> thanks
  • [15:30:11] * dcramer (n=davec@dcdsl.ebox.com) Quit ()
  • [15:33:40] <felipec> kulve: I just added the omapfb stuff, basically video=omapfb:vram:2M,vram:4M
  • [15:33:52] <kulve> ah, I don't give those..
  • [15:34:11] <kulve> Kernel command line: console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootdelay=1
  • [15:34:20] <kulve> that's my whole kernel arg list
  • [15:34:43] <felipec> kulve: I think the overlay is not setup by default
  • [15:35:00] <kulve> I used the OE default config
  • [15:38:59] <kulve> I loaded the module like this: insmod bridgedriver.ko base_img=/lib/dsp/baseimage.dof
  • [15:39:02] <kulve> and then:
  • [15:39:05] <kulve> # ./ping.out
  • [15:39:05] <kulve> DSP device detected !!
  • [15:39:05] <kulve> DSPNode_Allocate failed: 0x8000801d
  • [15:39:32] * feig1 (n=ejf3@2.sub-75-193-188.myvzw.com) Quit (Connection timed out)
  • [15:42:01] <felipec> kulve: probably the dsp node is not there... let me check the source code
  • [15:43:32] <felipec> kulve: maybe you need the pingdyn_3430.dll64P binary on /lib/dsp
  • [15:43:37] * Olipro (i=Olipro@uncyclopedia/Olipro) Quit (Read error: 104 (Connection reset by peer))
  • [15:43:50] * Olipro (i=Olipro@uncyclopedia/Olipro) has joined #beagle
  • [15:44:59] <kulve> now I have it there, but no change
  • [15:45:05] <kulve> same allocate failed
  • [15:45:52] <kulve> I haven't done anything else DSP related that loaded the dsp module (and built the libbridge.so user space library)
  • [15:47:31] <felipec> kulve: the sourcecode says that it should be configured in the baseimage, so I think you need to use ddbase_tiomap3430.dof64P instead
  • [15:47:58] <kulve> so I give that the insmod when loading the kernel module?
  • [15:48:45] <felipec> kulve: yes, modprobe bridgedriver base_img=ddbase_tiomap3430.dof64P
  • [15:49:01] <kulve> I used insmod instead of modprobe, but no change.. :/
  • [15:49:34] <kulve> same thing with modpobe
  • [15:50:12] <felipec> kulve: yeah, insmod=modprobe... so you get the same message?
  • [15:50:22] <kulve> DSPNode_Allocate failed: 0x80008008
  • [15:50:23] <kulve> yep
  • [15:50:43] <felipec> now the message is different, let me see what it actually means
  • [15:51:28] <kulve> ah, true
  • [15:51:31] <felipec> "A general failure occurred"
  • [15:51:32] <felipec> pff
  • [15:51:39] <kulve> :)
  • [15:51:54] <kulve> open("/dev/DspBridge", O_RDWR) = 3
  • [15:51:56] <kulve> ioctl(3, 0x18, 0xbeefab40) = -2147450872
  • [15:51:58] <kulve> write(1, "DSPNode_Allocate failed: 0x80008"..., 36DSPNode_Allocate failed: 0x80008008
  • [15:52:47] * gkarabin (n=gkarabin@64.212.175.249) has joined #beagle
  • [15:52:59] * gkarabin (n=gkarabin@64.212.175.249) has left #beagle
  • [15:55:35] * docelic (n=docelic@78.134.202.217) has joined #beagle
  • [15:58:22] <felipec> kulve: hmm, apparently that's an allocation problem
  • [15:58:37] <felipec> kulve: you have CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=14 ?
  • [15:58:51] <kulve> # zcat /proc/config.gz |grep OMAP_CONSIS
  • [15:58:51] <kulve> CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=14
  • [15:59:39] <kulve> is it ok that I haven't limited memory with mem=XXXM as a kernel arg?
  • [16:00:20] <felipec> kulve: if you are using the latest dsp bridge patches then it should be ok, you can try tough
  • [16:00:43] <kulve> well, the board is at the office and I'm at home so I can't test it before tomorrow :)
  • [16:01:07] <felipec> kulve: ahh, I see
  • [16:02:57] <felipec> I will try that ping, maybe rewrite it to be more useful, but anyway, if you still have issues please send those to linux-omap
  • [16:03:32] <felipec> but I think omapfb would work, once you set that video param
  • [16:04:04] <Crofton|work> koen, thanks
  • [16:06:50] <kulve> felipec: is the param enough or do I need to change some kernel configuration?
  • [16:06:55] <kulve> and rebuild the kernel?
  • [16:08:13] * nathan (n=nathan@adsl-69-106-228-95.dsl.pltn13.pacbell.net) has joined #beagle
  • [16:08:51] * nathan is now known as nathanm
  • [16:13:12] <felipec> kulve: for the omapfb? just the param, assuming your config is OK, and I guess the OE is
  • [16:13:46] <kulve> great, I'll test that tomorrow
  • [16:14:22] * doog (n=doug@cpe-75-80-160-171.san.res.rr.com) has joined #beagle
  • [16:20:37] * RogerMonk (n=a0740758@nat/ti/x-90ff5fc7de7a7a4d) Quit (Remote closed the connection)
  • [16:23:41] * pbrook_ is now known as pbrook
  • [16:27:43] * Olipro_ (n=Olipro@uncyclopedia/Olipro) has joined #beagle
  • [16:27:53] * Olipro (i=Olipro@uncyclopedia/Olipro) Quit (Nick collision from services.)
  • [16:27:55] * Olipro_ is now known as Olipro
  • [16:39:19] <doog> FYI, a fresh git and build of bb-demo-image from git.openembedded.dev resulted in a build error in libgweather but adding libsoup-2.4 to its DEPENDS got through that and then it stopped at gnome-panel_2.24.
  • [16:41:35] <koen> prpplague: serial port works :)
  • [16:42:00] <prpplague> koen: good deal
  • [16:42:06] <koen> doog: the libsoup thing got added yesterday, so it seems your git tree isn't up to date
  • [16:43:29] * likewise (n=Leon_Woe@atwork-186.r-212.178.104.atwork.nl) Quit ("ChatZilla 0.9.83 [Firefox 3.0/2008061015]")
  • [16:48:51] <kulve> mru: have you planned to make that memcpy_armneon.S to copy also size that are not multiple of 128?
  • [16:50:07] <kulve> is there any documentation for the instruction timings?
  • [16:51:02] * slothlove4 (n=srussell@user-387ggve.cable.mindspring.com) Quit (Read error: 110 (Connection timed out))
  • [16:51:04] <mru> nothing planned, nothing decided to the contrary...
  • [16:51:33] <kulve> we made some memcpy tests and it's a bit unfair since that skips some "corner cases" :)
  • [16:52:31] <mru> timings: http://infocenter.arm.com/help/topic/com.arm.doc.ddi0344b/Cfacfihf.html
  • [16:52:53] <kulve> thanks
  • [16:53:02] <kulve> (not that I understand anything about those ;)
  • [16:53:08] <kulve> I pasted the link forward
  • [17:02:01] * valhalla (n=valhalla@81-174-37-208.dynamic.ngi.it) has joined #beagle
  • [17:02:03] <doog> koen: I heard that before and since I'll have to learn the guts of git to figure out how to update, I cloned anew on a different computer last night only to still fail on libgweather. So, it makes me wonder 'where's Waldo' when it comes to these fixes cause they don't seem to be making it into git.openembedded.net dev tree.
  • [17:04:09] <doog> koen: though I do see many updates via the getweb UI ... two different repos it seems.
  • [17:06:51] * benvk (n=ben@d137223.upc-d.chello.nl) has joined #beagle
  • [17:09:27] * _apk (n=kows@85-18-136-98.fastres.net) has joined #beagle
  • [17:19:24] * jrmuizel (n=jrmuizel@bas19-toronto12-1167855509.dsl.bell.ca) Quit ()
  • [17:20:37] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [17:22:10] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit (Client Quit)
  • [17:26:51] * JuanG (n=Juan@nat/ti/x-782375b67ac2ec28) has joined #beagle
  • [17:26:56] * JuanG (n=Juan@nat/ti/x-782375b67ac2ec28) has left #beagle
  • [17:50:11] * dcordes_ (n=dcordes@unaffiliated/dcordes) has joined #beagle
  • [17:50:45] <sweetlilmre> demo image builds beautifully thanks to koen's fix, and with that, good night all :)
  • [17:51:03] <koen> 'night sweetlilmre
  • [17:51:18] <Crofton|work> awesome
  • [17:51:21] <Crofton|work> gn
  • [17:51:23] <sweetlilmre> :)
  • [17:51:39] <Crofton|work> koen, does x11-image have a chance at working
  • [17:51:53] * sweetlilmre (i=sweetlil@196-209-179-205-rndf-esr-5.dynamic.isadsl.co.za) Quit ("all good things come to those who persist! :)")
  • [17:52:35] <koen> Crofton|work: it should
  • [17:52:41] <Crofton|work> ok
  • [17:52:58] <koen> Crofton|work: I still need to find time to update it to matchbox-*-2
  • [17:53:09] <Crofton|work> they annoying thing is it sounds like I'll have some paying work for a few weeks
  • [17:53:17] <Crofton|work> which will slow my sdr progress
  • [17:53:38] <Crofton|work> on the other hand, one of the GNU Radio guys is getting interested in Beagle
  • [17:54:14] <koen> I received a mail from a guy wanting to work on link for beagle
  • [17:54:39] <koen> TI told him it wasn't working yet and then he discovered that it was demo-ed at LRL :)
  • [17:54:51] <Crofton|work> heh :)
  • [17:54:54] <Crofton|work> chaos
  • [17:55:19] <koen> non-public software :)
  • [17:55:26] <Crofton|work> yeah
  • [17:55:32] <Crofton|work> I think that is public now?
  • [17:55:51] <koen> not all of it AIUI
  • [17:56:23] <koen> iirc DSP/BIOS has some problems
  • [17:56:44] <koen> it will be fun when OE support DSP codegen
  • [17:56:55] * noeska (n=chatzill@ip565e6edd.direct-adsl.nl) has joined #beagle
  • [17:56:59] <koen> MACHINE=c64x bitbake ffmpeg :)
  • [17:57:42] <Crofton|work> ok
  • [17:58:12] <noeska> what is the current status of opengl es 2.0 development for the beagleboard?
  • [17:58:22] <koen> Crofton|work: pulseaudio is going to be in gnome=mobile, so keep an eye on poky
  • [17:58:24] * jrmuizel (n=jrmuizel@bas19-toronto12-1167855509.dsl.bell.ca) has joined #beagle
  • [17:58:32] <Crofton|work> ok
  • [17:58:36] <Crofton|work> I can make it work
  • [17:58:38] <koen> noeska: you can get a beta if you sell your soul
  • [17:58:46] <noeska> hmm
  • [17:58:50] <Crofton|work> you do not want pulse audio to resample
  • [17:59:06] <Crofton|work> libsamplerate needs NEON optimizations .....
  • [17:59:15] <noeska> when is the real thing to come for free or $ ?
  • [17:59:47] <koen> should be free as in beer
  • [18:00:06] <noeska> any release date?
  • [18:00:59] <koen> "next year"
  • [18:01:16] <felipec> Crofton|work: that would be nice :)
  • [18:02:48] <noeska> thanks
  • [18:03:20] <felipec> Crofton|work: did you find the interrupt issue?
  • [18:03:32] * noeska (n=chatzill@ip565e6edd.direct-adsl.nl) Quit ("ChatZilla 0.9.83 [Firefox 3.0.1/2008070208]")
  • [18:03:41] <Crofton|work> not yer
  • [18:03:54] <Crofton|work> going to try putting the source file on ramdisk
  • [18:04:13] <felipec> ah
  • [18:04:37] * dcordes (n=dcordes@unaffiliated/dcordes) Quit (Read error: 110 (Connection timed out))
  • [18:11:15] * heena (n=heenasin@dslb-084-057-076-243.pools.arcor-ip.net) has joined #beagle
  • [18:11:32] <felipec> sweet
  • [18:11:35] <felipec> http://www.eetimes.com/news/latest/showArticle.jhtml?articleID=179101800
  • [18:11:46] * heena i heard there is some problem with alsa on beagle
  • [18:11:51] <heena> is it true
  • [18:11:52] <heena> ??
  • [18:12:26] <TangerineTetrode> do people develop dircectly on the beagle, or do they use cross-compilers?
  • [18:12:57] <koen> sakoman, Crofton|work: http://dominion.thruhere.net/koen/OE/staging-patch.txt
  • [18:13:20] <Crofton|work> TangerineTetrode, mostly cross
  • [18:13:35] <Crofton|work> although I've heard you can ru compilers on the beagle
  • [18:13:58] * jrmuizel (n=jrmuizel@bas19-toronto12-1167855509.dsl.bell.ca) Quit (Read error: 104 (Connection reset by peer))
  • [18:14:19] <koen> jkridner_ is doing native compilation for demos IIRC
  • [18:15:13] <TangerineTetrode> that's cool
  • [18:15:34] <koen> you mean 'slow' :)
  • [18:15:53] <Crofton|work> cheap
  • [18:16:03] <TangerineTetrode> i have a fast machine (i do dm355 compiles on it)
  • [18:16:04] <Crofton|work> you can do beagle training self hosted
  • [18:17:13] <TangerineTetrode> 3500 mhz athlon
  • [18:18:58] <TangerineTetrode> my first beagle is showing up today, and I'm kind of excited
  • [18:19:38] <koen> Crofton|work: what do you think of the patch?
  • [18:21:30] * jrmuizel (n=jrmuizel@bas19-toronto12-1167855509.dsl.bell.ca) has joined #beagle
  • [18:21:51] <Crofton|work> good, if it works :)
  • [18:23:17] * bazbell (n=a0192809@nat/ti/x-fbc11a360903ca16) Quit ("Leaving.")
  • [18:24:21] * benvk (n=ben@d137223.upc-d.chello.nl) Quit (Remote closed the connection)
  • [18:27:47] * igor321 (n=igor@212-2.dsl.iskon.hr) has joined #beagle
  • [18:37:46] <TangerineTetrode> Yay, I have a beagle
  • [18:38:14] <igor321> me2
  • [18:40:51] * TAKI (n=Administ@dslb-088-072-207-158.pools.arcor-ip.net) has joined #beagle
  • [18:41:38] * jrmuizel_ (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [18:43:26] * pbrook (n=paul@78-105-115-80.zone3.bethere.co.uk) Quit (Read error: 60 (Operation timed out))
  • [18:43:37] * pbrook (n=paul@78-105-115-80.zone3.bethere.co.uk) has joined #beagle
  • [18:43:53] * TAKI (n=Administ@dslb-088-072-207-158.pools.arcor-ip.net) Quit (Client Quit)
  • [18:44:02] * TAKI (n=Administ@dslb-088-072-207-158.pools.arcor-ip.net) has joined #beagle
  • [18:47:27] * valhalla (n=valhalla@81-174-37-208.dynamic.ngi.it) Quit ("Leaving")
  • [18:52:00] * JamieBennett (n=jamie@5ac884e1.bb.sky.com) has joined #beagle
  • [18:57:47] * jrmuizel (n=jrmuizel@bas19-toronto12-1167855509.dsl.bell.ca) Quit (Read error: 110 (Connection timed out))
  • [18:58:54] * TAK2004 (n=Administ@dslb-088-072-196-106.pools.arcor-ip.net) Quit (Read error: 110 (Connection timed out))
  • [18:59:25] <nathanm> For a while I compiled my kernels native on BB. Takes about 90 minutes.
  • [19:15:06] <TangerineTetrode> ouch
  • [19:21:39] * hli (i=chaton@vig91-2-82-232-97-149.fbx.proxad.net) has joined #beagle
  • [19:25:33] * guillaum2 (n=Guillaum@AMontsouris-153-1-40-176.w90-2.abo.wanadoo.fr) has joined #beagle
  • [19:25:38] * docelic (n=docelic@78.134.202.217) Quit (Read error: 110 (Connection timed out))
  • [19:33:52] * igor321 (n=igor@212-2.dsl.iskon.hr) Quit ("leavin'")
  • [19:35:04] * dcramer (n=davec@missdsl.ebox.com) has joined #beagle
  • [19:43:12] * likewise (n=likewise@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [19:44:59] * like2wise (n=chatzill@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [19:45:21] <like2wise> hey all
  • [19:45:50] <JamieBennett> hi
  • [19:46:29] <koen> hey like2wise
  • [19:46:42] <GeneralAntilles> Hi, JamieBennett.
  • [19:47:11] <JamieBennett> Hi GeneralAntilles, having fun with your beagle board?
  • [19:47:21] <GeneralAntilles> Not at the moment, no.
  • [19:48:39] <JamieBennett> Just picked one up today. Lots to learn it seems
  • [19:50:57] <Crofton|work> gm
  • [19:51:06] <hli> hi
  • [19:52:03] <hli> i'd like to know if there is a VMware linux distribution for BeagleBoard Software development. I'm under Windows but have a VMWare player
  • [19:55:34] <nathanm> It didn't take me long to get Ubuntu set up with the CodeSourcery tools, hli. I know you can get Ubuntu in VMWare form.
  • [19:56:12] <hli> k
  • [19:56:39] <hli> CodeSourcery is the only thing to have ?
  • [19:57:46] <hli> because I also thought about DSP gcc compiler (i don't really know how it is available in binary or in source)
  • [19:57:47] * dcramer (n=davec@missdsl.ebox.com) Quit (Read error: 113 (No route to host))
  • [20:00:13] <nathanm> TI gives away DSP tools for non-commercial uses. There is a gcc that targets the C64x in the Beagleboard, but it is very limited and buggy -- probably not worth using.
  • [20:03:01] * jess (n=jess@117.195.140.197) has left #beagle
  • [20:03:09] * dcramer (n=davec@pdynbrd3-210.xDSL-1mm.sentex.ca) has joined #beagle
  • [20:04:16] <nathanm> koen has said the DSP might not be working on current BeagleBoards, so if you decide to do DSP coding there might not many who can help you. There's a link here describing how to get it set up: http://elinux.org/BeagleBoard/DSP_Howto
  • [20:05:03] * dcramer_ (n=davec@206.51.24.132) has joined #beagle
  • [20:07:07] * dcramer__ (n=davec@p56l1llp-d4-dynamic.xDSL-1mm.sentex.ca) has joined #beagle
  • [20:08:46] * dcramer (n=davec@pdynbrd3-210.xDSL-1mm.sentex.ca) Quit (Read error: 60 (Operation timed out))
  • [20:09:01] * dcramer (n=davec@p212l21lp-d4-dynamic.xDSL-1mm.sentex.ca) has joined #beagle
  • [20:10:35] * dcramer (n=davec@p212l21lp-d4-dynamic.xDSL-1mm.sentex.ca) Quit (Client Quit)
  • [20:13:19] * garren (n=garren@dsl-243-99-185.telkomadsl.co.za) has joined #beagle
  • [20:15:07] <felipec> nathanm: it is working
  • [20:15:20] <garren> lo all
  • [20:16:34] <felipec> oh, C64x gcc? where is that?
  • [20:18:11] <doog> hli: I've done liveCDs for developing for the Zaurus and was thinking about doing either a Beagle-LiveCD or a VMWare image. Would you be looking for something you would ssh into or a full GUI/Desktop kind of thing?
  • [20:18:39] <hli> huh
  • [20:18:59] * garren (n=garren@dsl-243-99-185.telkomadsl.co.za) Quit ("Ex-Chat")
  • [20:19:07] <doog> was that a question or are you thinking?
  • [20:19:08] <hli> full GUI/Desktp
  • [20:19:20] <doog> ah, ok
  • [20:20:36] <hli> nathanm : DSP is buggy or is it just the DSP gcc is buggy ?
  • [20:21:18] <doog> Not sure when I'll get to it but as soon as I can get a working build I can then move on to seeing what/how building ones own apps could be wrapped into a vm image.
  • [20:22:32] * fagius (n=fagius@static-71-111-254-119.rlghnc.dsl-w.verizon.net) Quit ("Leaving")
  • [20:22:48] <suihkulokki> felipec: I guess thise one http://mailman.tu-chemnitz.de/pipermail/gcc-c6x/2008-March/000035.html
  • [20:23:00] <doog> I currently get build failures and the DVI video output freq is not compatible with a few LCD monitors( 51Hz ) due to missing patches.
  • [20:23:11] * dcramer_ (n=davec@206.51.24.132) Quit (Read error: 110 (Connection timed out))
  • [20:23:42] <nathanm> hli: Just DSP gcc is buggy. felipec says DSP itself is working with TI tools.
  • [20:24:16] <nathanm> felipec: Thanks for the info. I was a little worried that DSP would have to wait for ES3.0. I plan to try it next week.
  • [20:24:26] <Crofton|work> the DSP works, we need to work out tool and library access with TI
  • [20:25:10] <doog> hli: another thing I'm looking at is something like x2x on a beagle build so we can run everything from just a USB gadget connection. ie, the keyboard and mouse are you desktops kbd/mouse and you internet comes over the USB connection. This setup requires no external powersupply and no USB hub.
  • [20:25:18] * dcramer__ (n=davec@p56l1llp-d4-dynamic.xDSL-1mm.sentex.ca) Quit (Read error: 113 (No route to host))
  • [20:25:27] <hli> doog : well i could try a ssh but i'm not familiar with
  • [20:25:44] <nathanm> felipec: What suihkulokki said. I looked into it and it was a student project that has been abandoned. It compiles trivial codes but has bugs.
  • [20:27:12] <hli> doog: that would be great indeed !
  • [20:27:50] <TangerineTetrode> what are the serial setting for the beagle?
  • [20:27:51] <doog> hli: everything I've run across is currently commandline based so using ssh is like using a dos prompt on windows. An option for a small and lightweight vm would be to have it with no GUI and you would connect to it via ssh or get one terminal from the VMWare player window.
  • [20:28:32] <nathanm> 115200 n81 no hw/sw flow control
  • [20:28:43] <TangerineTetrode> thx
  • [20:30:53] <nathanm> Crofton: Is the intention to release tools with the BB or as part of OE? My understanding was that you can get the tools already (separately).
  • [20:31:31] <koen> like2wise: do you have a link to a preempt-rt patch for .27rc?
  • [20:32:17] <like2wise> koen: 1 sec
  • [20:33:36] <like2wise> git://opensource1.windriver.com/people/paulg/rt/patches
  • [20:33:37] <like2wise> git://opensource1.windriver.com/people/paulg/rt/linux-2.6
  • [20:34:09] <like2wise> first one for broken out patches against 2.6.27-rc7, second one a fully patched tree.
  • [20:34:43] <like2wise> koen: but last official is: http://rt.et.redhat.com/download/patch-2.6.26.3-rt8.bz2
  • [20:35:47] <koen> will look at that next week or so
  • [20:37:10] * felipec (i=c0647cda@gateway/web/ajax/mibbit.com/x-6f442640ea67613b) Quit (Client Quit)
  • [20:37:21] * montamer (n=vijay@203.199.213.3) Quit (Remote closed the connection)
  • [20:38:24] * t_s_o (n=tso@135.84-49-129.nextgentel.com) Quit ("Konversation terminated!")
  • [20:43:49] <hli> doog: tell me the next time i connect here when you've made those VMWare images
  • [20:50:24] * thephilosopher (n=chatzill@modemcable108.47-58-74.mc.videotron.ca) has joined #beagle
  • [20:50:51] <thephilosopher> allo all
  • [20:53:41] * alecrim (n=alecrim@200.184.118.132) Quit (Read error: 113 (No route to host))
  • [21:00:37] <Crofton|work> is there a good page for setting up oe with git?
  • [21:00:54] * feig (n=ejf3@61.sub-75-194-43.myvzw.com) Quit ("Konversation terminated!")
  • [21:03:00] <sakoman> Crofton|work: here's what I did for the Overo beta: http://www.gumstix.net/Overo/view/Overo/Setting-up-a-build-environment/115.html
  • [21:03:20] <dcordes_> git clone git://git.linuxtogo.org/home/angstrom/openembedded.git; cd openembedded; git-checkout -b org.openembedded.dev
  • [21:05:25] * alecrim (n=alecrim@200.184.118.132) has joined #beagle
  • [21:08:16] * rsalveti (n=salveti@200.184.118.132) Quit (Remote closed the connection)
  • [21:13:38] * jrmuizel_ (n=jrmuizel@mozca02.ca.mozilla.com) Quit ()
  • [21:17:16] * dcordes_ (n=dcordes@unaffiliated/dcordes) Quit ("leaving")
  • [21:22:42] * guillaum2 (n=Guillaum@AMontsouris-153-1-40-176.w90-2.abo.wanadoo.fr) Quit ("Leaving.")
  • [21:25:14] * dcramer (n=davec@dcdsl.ebox.com) has joined #beagle
  • [21:29:24] * Olipro_ (n=Olipro@uncyclopedia/Olipro) has joined #beagle
  • [21:29:43] <doog> dcordes: you're talking about a _dev_ tree and you leave off how to update that? I could see if it was stable but not dev.
  • [21:31:21] <doog> cd $OE_HOME/org.openembedded.dev; git pull git://git.openembedded.net/org.openembedded.dev org.openembedded.dev does that.
  • [21:33:44] * zedstar (n=john@82-44-200-69.cable.ubr08.haye.blueyonder.co.uk) Quit (Remote closed the connection)
  • [21:34:01] * Olipro (n=Olipro@uncyclopedia/Olipro) Quit (Nick collision from services.)
  • [21:34:02] * Olipro_ is now known as Olipro
  • [21:34:36] * rsalveti (n=salveti@189.70.254.7) has joined #beagle
  • [21:40:43] * banderson (n=irc@63.230.135.220) Quit (Remote closed the connection)
  • [21:59:19] * like2wise (n=chatzill@82-171-51-231.ip.telfort.nl) Quit ("ChatZilla 0.9.83 [Firefox 3.0/2008061015]")
  • [22:00:31] * likewise (n=likewise@82-171-51-231.ip.telfort.nl) Quit ("Doing something else")
  • [22:00:52] * cbrake is now known as cbrake_away
  • [22:02:20] * [X]Spot (n=stancho@78.90.115.116) Quit (Read error: 110 (Connection timed out))
  • [22:06:37] * gkarabin (n=gkarabin@64.212.175.249) has joined #beagle
  • [22:06:44] * gkarabin (n=gkarabin@64.212.175.249) has left #beagle
  • [22:10:52] <vlad_> anyone know how I can force gcc (and binutils?) to generate eabi v4 flags in the elf header, instead of v5?
  • [22:10:56] <vlad_> I have some old tools that don't know about b5
  • [22:11:20] <vlad_> oh, this is an arg to as
  • [22:11:51] * john280z (n=johnm@user-0c2h5av.cable.mindspring.com) has joined #beagle
  • [22:12:35] * thephilosopher (n=chatzill@modemcable108.47-58-74.mc.videotron.ca) Quit (Read error: 104 (Connection reset by peer))
  • [22:23:31] * alecrim (n=alecrim@200.184.118.132) Quit (Read error: 113 (No route to host))
  • [22:24:05] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [22:29:05] * alecrim (n=alecrim@200.184.118.132) has joined #beagle
  • [22:29:23] * bazbell (n=a0192809@nat/ti/x-136e0a566b22c14c) has joined #beagle
  • [22:42:48] * prpplague (n=dave@mail.americanmicrosystems.com) Quit ("Leaving")
  • [22:52:41] * woski (n=woski@65.182.51.67) has joined #beagle
  • [22:59:49] * alecrim (n=alecrim@200.184.118.132) Quit (Remote closed the connection)
  • [23:02:27] * BThompson (n=BThompso@nat/ti/x-79d3b040b0d8c127) Quit ("Trillian (http://www.ceruleanstudios.com")
  • [23:13:24] * rsalveti (n=salveti@189.70.254.7) Quit (Read error: 110 (Connection timed out))
  • [23:14:18] * hansin (n=eric@c-67-173-251-102.hsd1.co.comcast.net) has joined #beagle
  • [23:20:33] * hli (i=chaton@vig91-2-82-232-97-149.fbx.proxad.net) Quit (Read error: 104 (Connection reset by peer))
  • [23:43:56] * NishanthMenon (n=nMenon@nat/ti/x-77657083362f865f) Quit ("Life without danger is a waste of oxygen")
  • [23:52:50] * john280z (n=johnm@user-0c2h5av.cable.mindspring.com) Quit (Remote closed the connection)