It is not dual core, it is the am335x supported BBB! Enjoy my take on the build and ideas revolving around the Servo Cape(s)!
Did you want 16 servos in rotation all at once, well... do you?
This is a newer version SBC w/ a SoC from Beagleboard. org that incorporates two A-72 microprocessors at 2Ghz.
We use the compounded knowledge we have gained in class to make an autonomous RC car that follows a lane and stops at a red box stop.
GStreamer will be compiled from source to read compressed H264 video directly from an HD webcam to not waste CPU resources on a BeagleBone.
The BeagleBone will be controlled through the network and use a serial terminal to communicate with off-board devices such as MCU boards.
PiTalk uses Quectel EG25-G Cat 4 module With maximum downlink and uplink speeds of 150 Mbps and 50 Mbps under LTE,
Compiling 8821AU WIFI card driver for Linux with BeagleBone Black
GPS-RTK HAT for Raspberry Pi extension board with cm-level, high-precision RTK-GPS positioning
Did you want a high performance set of instrumentation/machinery via USB from your BeagleBone Black Rev. C along w/ a compiled C++ SDK?
Did you want to work on the edge and learn along with a nice community?
Raspberry Pi HAT Launched, Can Detect Location with Centimeter-Level Accuracy
Learn how to use Blynk with Node.js on a variety of platforms.
UHF RFID Series is Compatible with Raspberry Pi Boards, Raspberry Pi Pico, Raspberry Pi Pico W
The Automation kit is basically based on LoRa module and powered by Raspberry Pi RP2040 a 32-bit dual ARM Cortex-M0+ microcontroller
The RangePi made it easier to connect LoRa network from anywhere at any time
USB to TTL - CP2102 USB to Serial/UART with USB Type-C, Micro USB Plug
The RangePi made easier to connect LoRa network from anywhere at any time
Did you want linuxCNC to work and make it work w/ the BBG? You came to the right place!
This is a simple example showcasing how to control a BleuIO dongle connected to Beaglebone Black using a python script.
Oh! Hello... did you want OpenCV to work and finally get your edge. py file to work on call?
With a new installment of Bullseye on the BBAI, did you think Tensorflow-Lite was a possibility?
Did you ever want to record video from your USB Camera with the AI with OpenCV?
A simple demo to show how to write an ISR on a BBB in Python running Debian.