A heart rate sensor that measures BPM and SPO2 and a temperature and humidity sensor. All data are displayed on the TFT touchscreen.

Under $200. Single 2S LiPo battery. Readily available parts. Programmable flight control via Python.

Using a small Linux SBC to replace the dashboard of my Nordic Treadmill. It set's goals and logs run and weight-loss history.

This is a small motor driver based around the L298 dual, H-bridge and the BeagleBone Black. It was typed up in Python.

I have this mower that I made from a BBG, Motor Bridge Cape, and there is no engine (YET)!

Quick and easy way to tell time and weather when getting ready!

Not content with an RC type drone, I want to design a flying software testing platform with which to develop new guidance methodologies.

Take the eduMIP and hook it up with the DSTR app in order to control the Mobile Inverted Pendulum from your very own cell phone!

This project will help you set up your PocketBeagle to automatically create a WiFi access point on boot.

I have been working out of a book and I thought of adding some extra oomph.

Data Analysis For Sailing Performance, A Maker's Solution

Turn your BeagleBone Black or BeagleBoard-xM into a stand-alone Super Nintendo appliance. Play your favorite classic SNES games!

A smart thermal camera using FLIR Lepton3 on BeagleBone Blue board. The project won the "FLIR Lepton3/BeagleBone Blue challenge" in 2017.

The "Rescue Repeater" is a drone-based radio repeater solution to allow communications to be rapidly restored or extended over the horizon.

The beginnings of a 210mm quadcopter controlled by the BeagleBoard.org PocketBeagle development board powered by Octavo Systems SiP.

The BeagleWire is an FPGA (Lattice iCE40HX4k) development platform that has been designed for use with BeagleBone boards.

Ever looked to the skies and wondered what it would be like to roam across the stars, look here to create your own 3d-printed drone!!!

Create your own headless music player with the PocketBeagle and Mopidy!

Add buttons and an LCD for an easy to create retrogaming platform. This is the add-on PocketCape and configuration software.

Write a C# App for Beaglebone. Access GPIO & AIN ports and store on Azure using WindowsAzur. Storage lib. Use remote debugging from VS 2017.

Making some motors move for starters w/ Flask, Python, HTML, Bootstrap, and things! Enjoy!

BuddyBot is the first robot programmed entirely with the Swift programming language and uses the SwiftyBones library.

Update: I got covered by.

Ever wondered how many people were in your room? Ever wondered how many people have ever entered your room??? Look no further!!