Create your very own full-size Star Wars BB-8 self-balancing robot using these instructions.
Update: I got covered by.
Determine a solar power plant's power output using data from the Cloud Motion Vector (CMV) Sensor System and a model of the power plant.
Current sprinkler systems leave much to be desired, so we've designed a sprinkler system that works smarter and saves water!
In this project, a microcontroller-based circuit controls an LED designed with a distributed (Xbox 360) user interface.
Project to show how to use xChips with a BeagleBone Black through a XinaBox bridge on the interface found on the SBC.
This will walk you through how to use the PCB Ruler to measure things that are longer than the maximum measuring capacity of the ruler.
We finished the Cobra MiniSumo chassis build in part 1 of this project. Let's add some brain power this time.
A GPRS weather station using BeagleBone with custom firmware for battery saving.
Throwing some motors are okay but making them go with the LoadCape is much more sophisticated.
Ever want to play on the PlayStation 1 again, but without being restricted by the controller's length? Well this project is just for you.
We created a vi that can synthesizes different instrument sounds by generating different ADSR envelopes. Then deployed vi on the BeagleBone.
This project enables ioT applications for your camper van. The central control unit consist of a Python GUI on a BBB.
Get alerted about your grain bin overflowing- before it happens.
Design and build a system for monitoring structural movements in smart buildings with Infineon 3D Magnetic 2Go.
This project merges the electrical control board and chassis of an RC car into one!
Bela is an open-source platform for super responsive audio and sensor processing with the PocketBeagle.
This is a small motor driver based around the L298 dual, H-bridge and the BeagleBone Black. It was typed up in Python.
Using LabVIEW 2014 and LINX 3.0, we created two wirelessly controlled Sumobots.
Saving the precious plants of the millennial.
This project's a proof of concept to use the BeagleBone Black shield to work as a modular structure using different communication protocols.
The BeagleWire is an FPGA (Lattice iCE40HX4k) development platform that has been designed for use with BeagleBone boards.
Set up CrashPlan on Raspberry Pi and make it your Raspbian backup tool using ExaGear Desktop (try it on any ARM board).
Raspberry Pi Project in Seismology of one Eltechs' customer. Ultimate guide on how to use Raspberry Pi for recording seismic data.