There is a new puppy in the family! PocketPilot is a smaller version of the BBBmini Flight Controller.
Learn how to use Blynk with Node.js on a variety of platforms.
Build a car hacking spy device to remotely read and send CAN commands and track GPS location. All based on open source software/hardware.
BBBmini is a state of the art Linux autopilot / flightcontroller Cape for the BeagleBone. It can be used for Copter, Planes or Rovers.
The control of a robot may be painful as you have to develop specific clients for each mobile device. I propose a Web based control
BeagleBone Green Wireless Irrigation Control using HTML5, WebSockets, and Ecmascript 6.
Under $200. Single 2S LiPo battery. Readily available parts. Programmable flight control via Python.
A hand-held synthesizer with cap touch buttons, various modes on a four-key drumpad, and a looper for on-the-go composing.
Amazon Alexa like device running on the Beaglebone.
An experimental skill for using Amazon Alexa to control Bose SoundTouch speakers.
Plug in the board, connect any drawing utensil of your choice, draw paper of your choice, and save your masterpiece digitally!
A quick guide to setting up the $25 computer that fits in an Altoids Smalls tin.
Getting Started with Safe Haptic Neuroprosthesis using the Haptic Cape for BeagleBone Green
Using a BeagleBone Black, this coffee temperature detector works in an Internet of Things to create a comprehensive and useful display.
Here is a demo of voice-controlled home automation using Amazon Alexa and PubNub data stream network.
Design and build a system for monitoring structural movements in smart buildings with Infineon 3D Magnetic 2Go.
Experience the OSD335x performance for industrial applications & robotics by building this cool Rubik's Cube solver using BeagleBone Blue.
An Internet connected device that controls servos and sends sensor (GPS/gyro/accel/compass) updates in real time over a GSM cell link.
Have you ever wanted to use a PocketBeagle? And build a remote car? Well, I have! Here is how you can too!
Using LabVIEW 2014 and LINX 3.0, we created two wirelessly controlled Sumobots.
PRUADC1 - Beaglebone Green and PRU "Programmable Real-Time Unit" Interface to ADC using RemoteProc and RPMsg Framework.
This is a great weekend IoT project which uses the BeagleBone Green to display Temperature Humidity inside and outside your home and more..
Use Yocto on BeagleBone Black.
X10 modules are cheap and everywhere, in order to integrate these modules into your DIY home automation system it is nice to have a bridge.