The BeagleBone will be controlled through the network and use a serial terminal to communicate with off-board devices such as MCU boards.

PiTalk uses Quectel EG25-G Cat 4 module With maximum downlink and uplink speeds of 150 Mbps and 50 Mbps under LTE,

GPS-RTK HAT for Raspberry Pi extension board with cm-level, high-precision RTK-GPS positioning

Did you want a high performance set of instrumentation/machinery via USB from your BeagleBone Black Rev. C along w/ a compiled C++ SDK?

Did you want to work on the edge and learn along with a nice community?

Raspberry Pi HAT Launched, Can Detect Location with Centimeter-Level Accuracy

UHF RFID Series is Compatible with Raspberry Pi Boards, Raspberry Pi Pico, Raspberry Pi Pico W

The Automation kit is basically based on LoRa module and powered by Raspberry Pi RP2040 a 32-bit dual ARM Cortex-M0+ microcontroller

The RangePi made it easier to connect LoRa network from anywhere at any time

USB to TTL - CP2102 USB to Serial/UART with USB Type-C, Micro USB Plug

The RangePi made easier to connect LoRa network from anywhere at any time

Oh! Hello... did you want OpenCV to work and finally get your edge. py file to work on call?

With a new installment of Bullseye on the BBAI, did you think Tensorflow-Lite was a possibility?

Did you ever want to record video from your USB Camera with the AI with OpenCV?

A simple demo to show how to write an ISR on a BBB in Python running Debian.

Did you ever want to lock your door from your computer or via WiFi?

Did you want to change from ARM to RISC-V Processing and did not know how to make the jump? BeagleV!

Looking to access your Raspberry Pi or Jetson nano remotely? This guide will help you access VNC & SSH over network in 2 minutes!

Have you ever been tired of your old hardware and wanted to upgrade with all the fixings?

Did you ever want to have a nice LED blink off and on while OpenCV recorded video from your WebCam?

Did you want to handle some 12v servos with your BBBW and make them available with an already completed SDK?

In this series of posts, we will explore Linux's hardware-software interface using a BeagleBoard.

My personal experience testing out features on the PocketBeagle by Beagleboard and technical knowledge I learned along the way!

In this tutorial, I will demonstrate how to use Seeed Studio Wio Terminal as a USB HMI display for BeagleBone.