This project is about 2 capes to enable Ardupilot to Run in the BBIA. One is to use the BBBMini cape and the second is a new cape

3d area scanner utilizing off the shelf and 3d printed parts and components.

The GPIOD in the BeagleBone Black relies on Python wrappers to work. Our project allows Python code to work with the GPIOD directly.

Data Analysis For Sailing Performance, A Maker's Solution

Pneumatic walking robot uses vacuum suction cups to traverse almost any indoor surfaces and disinfect them with UV light.

Use the powerful PRU on PocketBeagle or BBAI to capture 16-channel audio from a PDM microphone array.

The "Rescue Repeater" is a drone-based radio repeater solution to allow communications to be rapidly restored or extended over the horizon.

The Smart Analyzer is an extended version of Oscillogram for Utility Grid with advanced resources: fft analysis on voltage and current.

Create your very own full-size Star Wars BB-8 self-balancing robot using these instructions.

Determine a solar power plant's power output using data from the Cloud Motion Vector (CMV) Sensor System and a model of the power plant.

A BeagleBone Blue powered drone that will follow you around on a leash.

We finished the Cobra MiniSumo chassis build in part 1 of this project. Let's add some brain power this time.

This project merges the electrical control board and chassis of an RC car into one!

Sensing, Connected Utility Transport Taxi for Level Environments (SCUTTLE) born in the Mechatronics Engineering Technology Program at TAMU.

Saving the precious plants of the millennial.

The BeagleWire is an FPGA (Lattice iCE40HX4k) development platform that has been designed for use with BeagleBone boards.

This project's a proof of concept to use the BeagleBone Black shield to work as a modular structure using different communication protocols.

Quickly automate any door with facial recognition, motion detection, motor control & text to speech using BeagleBone Black Wireless.

A smart thermal camera using FLIR Lepton3 on BeagleBone Blue board. The project won the "FLIR Lepton3/BeagleBone Blue challenge" in 2017.

Not content with an RC type drone, I want to design a flying software testing platform with which to develop new guidance methodologies.

"Stranger Things" Christmas Light message wall.

Add a touch interface to the steering wheel of any car to control music on your phone!

This article is about porting the Turnigy Fabrikator Mini from HobbyKing to Machinekit. It explains the basics of porting a new 3D printer.

Update: I got covered by.