It is not dual core, it is the am335x supported BBB! Enjoy my take on the build and ideas revolving around the Servo Cape(s)!

GStreamer will be compiled from source to read compressed H264 video directly from an HD webcam to not waste CPU resources on a BeagleBone.

PiTalk uses Quectel EG25-G Cat 4 module With maximum downlink and uplink speeds of 150 Mbps and 50 Mbps under LTE,

Compiling 8821AU WIFI card driver for Linux with BeagleBone Black

The BeagleBone will be controlled through the network and use a serial terminal to communicate with off-board devices such as MCU boards.

Did you want 16 servos in rotation all at once, well... do you?

GPS-RTK HAT for Raspberry Pi extension board with cm-level, high-precision RTK-GPS positioning

Raspberry Pi HAT Launched, Can Detect Location with Centimeter-Level Accuracy

UHF RFID Series is Compatible with Raspberry Pi Boards, Raspberry Pi Pico, Raspberry Pi Pico W

The Automation kit is basically based on LoRa module and powered by Raspberry Pi RP2040 a 32-bit dual ARM Cortex-M0+ microcontroller

USB to TTL - CP2102 USB to Serial/UART with USB Type-C, Micro USB Plug

The RangePi made easier to connect LoRa network from anywhere at any time

This is a simple example showcasing how to control a BleuIO dongle connected to Beaglebone Black using a python script.

Did you want a high performance set of instrumentation/machinery via USB from your BeagleBone Black Rev. C along w/ a compiled C++ SDK?

A simple demo to show how to write an ISR on a BBB in Python running Debian.

Did you ever want your BBB to do more than make a LED light up? You are in luck!

Looking to access your Raspberry Pi or Jetson nano remotely? This guide will help you access VNC & SSH over network in 2 minutes!

Often web server access to remote devices behind a firewall is needed (Wifi router, smart home). This is how you can solve this securely.

Do you like Linux/Embedded Linux? Do you like IoT? What about using SigFox in your Linux IoT projects?

This is how to access Raspberry Pi shell over the internet using any web browser from anywhere worldwide. 5 minute guide!

This project is a wireless drone that can be controlled using the Blynk app on your phone. It has an autonomous mode that avoids objects.

Have you ever been tired of your old hardware and wanted to upgrade with all the fixings?

Did you ever want to use a FET for switching your LED on and off?

Project to show how to use xChips with a BeagleBone Black through a XinaBox bridge on the interface found on the SBC.