• [00:00:25] * fastmonkey (46598baa@gateway/web/freenode/ip.70.89.139.170) has joined #beagle
  • [00:00:31] <fastmonkey> greetings
  • [00:02:01] <fastmonkey> I have what appears to be a dead beagleboard black (A5C). It last worked when I powered down from the Ubuntu command line. Now I don't get a power LED. I've used both USB and Wall power, tried holding the power button for 8-seconds. No luck so far.
  • [00:02:22] * tema (~tema@178-16-155-142.obit.ru) has joined #beagle
  • [00:02:50] <fastmonkey> I've been looking through documentation to see if there were any odd combinations, but as far as I can tell the PMIC isn't turning on.
  • [00:03:10] <thews> beagleboard.org/support/rma
  • [00:03:24] <fastmonkey> Heading that way, just wanted to check with the group first, thanks thews.
  • [00:03:39] * dgerlach (~dave@nat/ti/x-axlzzeiscdywlvkg) Quit (Quit: Leaving.)
  • [00:03:53] <thews> no problem, there's no fuses of any sort
  • [00:04:06] <thews> if neither way show anything it's just about guaranteed that the chip is fried
  • [00:04:07] * Rickta59 (~Rickta59@cpe-174-106-144-066.ec.res.rr.com) Quit (Quit: Lost terminal)
  • [00:04:34] <fastmonkey> Is this common?
  • [00:04:54] <thews> from what I can tell, it's not
  • [00:05:12] <thews> it's probably pretty easy to do if you supply too much current into the input pins though
  • [00:05:25] <thews> from outside, or shorting to another pin that has higher current
  • [00:05:35] <thews> like 5v vcc pin
  • [00:05:46] <thews> and it's good to always use it with standoffs
  • [00:06:17] <fastmonkey> It was just sitting there, it runs my music server. I powered it off, unplugged it. Plugged it back in and nothing.
  • [00:06:39] <thews> does it run off of an sd card?
  • [00:06:40] <fastmonkey> Very strange, but requesting an RMA now.
  • [00:06:42] <fastmonkey> Yes
  • [00:06:43] * calculu5 is now known as calculus
  • [00:06:47] <fastmonkey> Yes to SD card
  • [00:06:48] <thews> does it boot w/o sd card?
  • [00:06:55] <fastmonkey> Nope. No lights at all
  • [00:07:05] <fastmonkey> I did try it without the SD card.
  • [00:07:14] <thews> I'd definitely try the rma process then
  • [00:07:22] <fastmonkey> Doing it now.
  • [00:07:48] * tabbek (~tabbek@c-24-17-245-252.hsd1.wa.comcast.net) Quit (Ping timeout: 240 seconds)
  • [00:07:49] <thews> from what I saw on the forums they're pretty good about rmas, and are able to fix the boards pretty easily
  • [00:08:39] <thews> fastmonkey: how long did you hold down the power button?
  • [00:10:25] <fastmonkey> About 20 seconds
  • [00:10:37] <fastmonkey> The docs said 8, but I just kept holding to make sure I was well past that.
  • [00:13:38] * sirtaco (81416039@gateway/web/freenode/ip.129.65.96.57) has joined #beagle
  • [00:15:53] <sirtaco> Hi all, so I have a question about the BeagleBoard-xM. The Angstrom build is giving my team and I trouble with the eth drivers, so we're considering moving to Arch. Is this a good move or not? If so, what experiences/hiccups have you all had with going to and using Arch?
  • [00:18:03] * kiwichris (~textual@CPE-58-172-129-85.nfcz1.ken.bigpond.net.au) Quit (Ping timeout: 245 seconds)
  • [00:18:25] * tabbek (~tabbek@c-24-17-245-252.hsd1.wa.comcast.net) has joined #beagle
  • [00:27:57] * magyarm (~mike@206-248-177-78.dsl.teksavvy.com) has joined #beagle
  • [00:36:47] * magyarm (~mike@206-248-177-78.dsl.teksavvy.com) Quit (Quit: Leaving.)
  • [00:37:00] * magyarm (~mike@206-248-177-78.dsl.teksavvy.com) has joined #beagle
  • [00:37:36] * emeb (~ericb@ip70-176-233-148.ph.ph.cox.net) Quit (Quit: Leaving.)
  • [00:38:07] * dwery (~dwery@nslu2-linux/dwery) Quit (Read error: Operation timed out)
  • [00:38:12] <sirtaco> This place is deaaaaaad.
  • [00:38:17] * sirtaco (81416039@gateway/web/freenode/ip.129.65.96.57) Quit (Quit: Page closed)
  • [00:39:13] * emeb_mac (~ericb@ip70-176-233-148.ph.ph.cox.net) has joined #beagle
  • [00:42:43] * honestly (~luke@unaffiliated/luketheduke) Quit (Quit: reboot!)
  • [00:43:45] * b_52globe (~b_52globe@41.249.81.99) Quit (Remote host closed the connection)
  • [00:43:55] * mranostay (~mranostay@pdpc/supporter/active/mranostay) has left #beagle
  • [00:44:16] * thurgood (~thurgood@64.132.24.36) Quit (Remote host closed the connection)
  • [00:44:42] * thurgood (~thurgood@64.132.24.36) has joined #beagle
  • [00:49:09] * thurgood (~thurgood@64.132.24.36) Quit (Ping timeout: 248 seconds)
  • [00:51:50] * robtow (~robtow@184-105-177-98.static.hilltopinternet.com) has joined #beagle
  • [00:54:42] * luketheduke (~luke@unaffiliated/luketheduke) has joined #beagle
  • [00:55:10] * luketheduke is now known as honestly
  • [01:04:55] * fastmonkey (46598baa@gateway/web/freenode/ip.70.89.139.170) Quit (Ping timeout: 250 seconds)
  • [01:08:56] * zeroem (~dhamilton@nat-225.fw1.la.vclk.net) has left #beagle
  • [01:09:44] * robtow1 (~robtow@184-105-177-98.static.hilltopinternet.com) has joined #beagle
  • [01:10:23] * robtow (~robtow@184-105-177-98.static.hilltopinternet.com) Quit (Ping timeout: 252 seconds)
  • [01:10:49] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit ()
  • [01:13:52] * thurgood (~thurgood@cpe-70-113-204-247.austin.res.rr.com) has joined #beagle
  • [01:21:50] * robtow1 (~robtow@184-105-177-98.static.hilltopinternet.com) Quit (Quit: Leaving.)
  • [01:22:13] * cndiv (~cndiv@wikimedia/cdeubner) Quit (Ping timeout: 272 seconds)
  • [01:26:30] * tema (~tema@178-16-155-142.obit.ru) Quit (Ping timeout: 246 seconds)
  • [01:31:23] * flowsnake (~flowsnake@cpc26-aztw25-2-0-cust894.aztw.cable.virginm.net) Quit (Read error: Connection reset by peer)
  • [01:34:23] * emeb_mac (~ericb@ip70-176-233-148.ph.ph.cox.net) Quit (Quit: emeb_mac)
  • [01:35:58] * flowsnake (~flowsnake@cpc26-aztw25-2-0-cust894.aztw.cable.virginm.net) has joined #beagle
  • [01:36:58] * dogmatic69 (~dogmatic6@cpc10-telf10-2-0-cust20.wolv.cable.virginm.net) Quit (Remote host closed the connection)
  • [01:41:07] * emeb_mac (~ericb@ip70-176-233-148.ph.ph.cox.net) has joined #beagle
  • [01:52:07] * prp^2 is now known as prpplague
  • [01:52:38] * magyarm (~mike@206-248-177-78.dsl.teksavvy.com) Quit (Ping timeout: 245 seconds)
  • [02:07:30] * joel_ (~joel@nat/ti/x-lkpbeaulcqpsdifd) Quit (Ping timeout: 245 seconds)
  • [02:29:57] * prpplague (~prpplague@107-206-64-184.lightspeed.rcsntx.sbcglobal.net) Quit (Ping timeout: 252 seconds)
  • [02:30:49] * kaliatech (~kaliatech@c-71-58-91-18.hsd1.pa.comcast.net) has joined #beagle
  • [02:32:45] * kaliatech2 (~kaliatech@c-71-58-91-18.hsd1.pa.comcast.net) has joined #beagle
  • [02:34:19] * Defiant (erik@e179199219.adsl.alicedsl.de) Quit (Ping timeout: 272 seconds)
  • [02:36:28] * kaliatech (~kaliatech@c-71-58-91-18.hsd1.pa.comcast.net) Quit (Ping timeout: 264 seconds)
  • [02:36:58] * Defiant (erik@e177142123.adsl.alicedsl.de) has joined #beagle
  • [02:37:16] * tema (~tema@178-16-144-245.obit.ru) has joined #beagle
  • [02:46:57] <bahar> i switched the bone to Ubuntu and it went very well, but I can't speak to Arch Linux
  • [02:48:16] <thews> looks like he's gone already
  • [02:50:25] * natsurou (~natsurou@201.230.222.28) Quit (Quit: Leaving...)
  • [02:51:05] <frege> yo
  • [02:51:28] * natsurou (~natsurou@201.230.222.28) has joined #beagle
  • [02:52:51] * vvu|Log is now known as vvu|Log_away
  • [02:53:25] * emeb_mac (~ericb@ip70-176-233-148.ph.ph.cox.net) Quit (Quit: emeb_mac)
  • [02:53:52] * emeb_mac (~ericb@ip70-176-233-148.ph.ph.cox.net) has joined #beagle
  • [02:56:10] * kuldeepdhaka (~kuldeepdh@117.254.216.100) Quit (Ping timeout: 265 seconds)
  • [02:56:27] * kuldeepdhaka_ (~kuldeepdh@117.254.220.180) has joined #beagle
  • [02:58:17] * flo_lap (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [02:59:54] <frege> hey guys
  • [02:59:58] <frege> would you check my circuit
  • [02:59:58] <frege> http://flockdraw.com/cvumwa
  • [03:00:17] <frege> we had this conversation last night for an infrared photodiode
  • [03:00:26] <frege> it used to work but it doesn't now
  • [03:01:48] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Ping timeout: 245 seconds)
  • [03:04:05] * prpplague (~prpplague@107-206-64-184.lightspeed.rcsntx.sbcglobal.net) has joined #beagle
  • [03:04:40] * kaliatech2 (~kaliatech@c-71-58-91-18.hsd1.pa.comcast.net) Quit (Ping timeout: 264 seconds)
  • [03:05:08] * Peuc (~Peuc@ip-50-21-134-236.dsl.netrevolution.com) Quit (Ping timeout: 245 seconds)
  • [03:10:08] <frege> I'm getting 1 all the time
  • [03:10:40] * tema (~tema@178-16-144-245.obit.ru) Quit (Ping timeout: 264 seconds)
  • [03:13:28] * NovaKitty (~Nova@76-217-29-151.lightspeed.yrlnca.sbcglobal.net) has joined #beagle
  • [03:16:47] <NovaKitty> I've used DD to copy the second (rootfs) partition from a SD card to the first partition of a USB hard drive. What file to I edit on the sd card to force it to use the USB drive for the root filesystem instead of the SD card? This is the Debian armhf image.
  • [03:19:57] <vagrantc> which Debian armhf image?
  • [03:21:05] <NovaKitty> the one from armhf.com
  • [03:21:21] <NovaKitty> wheezy
  • [03:21:31] <vagrantc> in any case, you'd need to pass root= on the boot prompt ... possibly in uEnv.txt?
  • [03:23:05] * tabbek (~tabbek@c-24-17-245-252.hsd1.wa.comcast.net) Quit (Ping timeout: 272 seconds)
  • [03:23:21] <frege> guys
  • [03:23:24] <frege> can someone help me here?
  • [03:25:04] <jonpry> it just can't work like that
  • [03:25:22] <jonpry> IR diode is going to have a reverse voltage of < 1V
  • [03:25:29] * tabbek (~tabbek@c-24-17-245-252.hsd1.wa.comcast.net) has joined #beagle
  • [03:25:49] <thews> frege if I remmeber from last night you had just the resistor on one side of the sensor instead of resistor on one side having one end on the ground (pulldown) or the other end on 3.3v (pullup)
  • [03:26:35] <frege> thews: yeah; did you see the circuit?
  • [03:26:47] <NovaKitty> vagrantc: thank you
  • [03:26:47] <thews> I think I did but you showed the resistor in series
  • [03:26:53] <thews> instead of T-d off
  • [03:26:56] <vagrantc> NovaKitty: did you find what you needed?
  • [03:27:11] <frege> thews: this one? http://flockdraw.com/cvumwa
  • [03:27:31] <NovaKitty> vagrantc: I think youre right, I'm just looking for some examples to make sure
  • [03:27:41] <jonpry> short pin is anode?
  • [03:28:06] <NovaKitty> vagrantc: I did this with a Pi and it was the same thing pretty much but a different file
  • [03:28:13] * Sakai (7123b032@gateway/web/freenode/ip.113.35.176.50) has joined #beagle
  • [03:28:44] <frege> thews: ?
  • [03:29:50] <Sakai> We are Japan IT company, we would like to buy 2pcs of beaglebone black Revision A6. where can we buy?
  • [03:30:11] <thews> frege: I would think you would need 3.3v on one side of the sensor by itself, and then the other side going to the pin to your input pin, and then a T off on the input pin that has a resistor and then to ground
  • [03:30:45] <frege> thews: would you draw it for me?
  • [03:30:50] <thews> because the diode needs enough forward voltage to cross the PN junction
  • [03:31:24] <frege> let me try
  • [03:32:29] <NovaKitty> Sakai: Beagleboard.org, if you click the buy button, it presents you with a list of vendors you can buy from. I would see if you can find one of these that is in Japan or ships to Japan
  • [03:33:09] <thews> frege: http://new.dave-auld.net/images/stories/Arduino/BasicIO/AnalogIn-PhotoResistor.jpg
  • [03:33:28] <Sakai> now all is revision A6?
  • [03:33:49] <NovaKitty> I got mine from Makershed in California, USA..it is rev R6
  • [03:34:04] <Sakai> thank you.
  • [03:34:50] <thews> frege: another http://www.me.umn.edu/courses/me2011/arduino/technotes/photocell/schem1.gif
  • [03:35:25] <thews> of course for you the voltage will be 3.3v for digital pins, and resistor value could be different depending on the resistance measured across the photoresistor
  • [03:36:16] <thews> http://www.bristolwatch.com/arduino/img/photores.jpg examples of pull down and pull up
  • [03:36:30] * sharebrained (~sharebrai@mail.sharebrained.com) has left #beagle
  • [03:37:06] <frege> thews: what do you suggest for resistance?
  • [03:37:12] <frege> 10kohm?
  • [03:37:26] <thews> if you have some choices I'd start with maybe 1k or 3k
  • [03:37:36] <thews> unless you have a spec sheet on the sensor
  • [03:37:47] <thews> multimeters take away all of the guesswork
  • [03:38:36] <frege> I will buy one
  • [03:39:04] <thews> you can measure the individual sections of resistance
  • [03:39:33] <thews> at one point the photo resistor should have more resistance than the resistor
  • [03:39:38] <thews> and otherwise have less
  • [03:39:53] <thews> electricity takes the path of least resistance
  • [03:40:14] <thews> depending on the exposure to light
  • [03:41:09] <frege> interesting
  • [03:41:26] <thews> view the photo resistor as a potentiometer
  • [03:41:31] <thews> it's just a variable resistor
  • [03:41:53] <thews> what changes it's resistance is the exposure to what it is sensitive to
  • [03:41:54] <myself> but with only two leads, so you need to pair it with a fixed resistor to get a useful potentiometric output.
  • [03:41:57] <thews> that's what makes it a ssensor
  • [03:42:10] <myself> "potential" is another term for "voltage", by the way. A potentiometer is a voltage divider.
  • [03:42:12] <frege> I had this shit working and it made total sense to me and I got what was what
  • [03:42:22] <jonpry> photodiode != photoresistor
  • [03:42:47] <thews> photodiode allows electricity to flow based on forward current
  • [03:43:11] <jonpry> photodiode is a solar cell, it makes power
  • [03:43:23] <thews> not necessarily
  • [03:43:36] <frege> it's not working
  • [03:44:27] <thews> there are photo diodes that just behave as diodes but have properties to make the PN junction gap lessened
  • [03:44:33] <frege> this is an infrared sensor
  • [03:45:00] <frege> 300nm to 1100nm
  • [03:46:02] <jonpry> that isn't really sufficient to say what it is
  • [03:46:29] <frege> jonpry: PT481
  • [03:46:44] <frege> jonpry: P/N: OPTIC-001484
  • [03:47:08] <frege> jonpry: Photo Transistor Dar. Peak(800nm) 400nm-1000nm
  • [03:47:12] <frege> that's the exact specs
  • [03:47:40] <frege> H.Sen Ic: 10mA Vce(sat):0.7V
  • [03:47:48] <jonpry> yeah phototransistor
  • [03:48:00] <thews> all different things
  • [03:48:10] <frege> so how do I get its value?
  • [03:48:15] <frege> I need a pullup resistor
  • [03:48:40] <frege> between VDD3.5 and longer pin of phototransistor right?
  • [03:48:54] <frege> what should be the resistance?
  • [03:49:02] <frege> I got all sort of resistors in front of me
  • [03:49:16] <frege> from 0 to 1Mohm
  • [03:49:33] <jonpry> i think you have it backward
  • [03:49:46] <jonpry> short lead is the collect and it's pnp device
  • [03:49:53] <jonpry> *collector
  • [03:50:13] <frege> ahh shit
  • [03:50:31] * prpplague (~prpplague@107-206-64-184.lightspeed.rcsntx.sbcglobal.net) Quit (Read error: Operation timed out)
  • [03:51:09] <thews> http://www.flickr.com/photos/61351883@N06/5846338891/
  • [03:51:42] <frege> jonpry: so far VDD -----/\/\10kohm/\/\------(long-leg)(phototransistor)(short-leg)-------?
  • [03:51:46] <frege> what's ?
  • [03:52:06] <jonpry> gnd
  • [03:52:10] <thews> http://dgraves.org/mailboxmonitor
  • [03:52:20] <thews> looked like the long leg was ground on there
  • [03:52:23] <thews> have to get some rest
  • [03:52:27] <frege> weird
  • [03:52:35] <frege> jonpry: what about the input pin?
  • [03:52:58] <jonpry> wait
  • [03:53:29] <jonpry> long leg is gnd
  • [03:53:43] <jonpry> short leg is 10k to 3.3V
  • [03:53:59] <jonpry> input is short leg
  • [03:56:05] * bizarro_1 (~bizarro_1@179.Red-193-152-189.dynamicIP.rima-tde.net) Quit (Quit: Leaving)
  • [03:56:07] <frege> fuck it trurned off
  • [03:56:19] <frege> hopefully nothing burned out
  • [03:56:25] * Peuc (~Peuc@ip-50-21-134-236.dsl.netrevolution.com) has joined #beagle
  • [03:58:08] <Dr{Wh0}> http://hades.mech.northwestern.edu/index.php/Photodiodes_and_Phototransistors
  • [03:59:10] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) has joined #beagle
  • [04:00:02] <NovaKitty> vagrantc: Ok I'm looking at my uEnv.txt...It looks complicated. I pasted it here - http://pastebin.com/0ZyYEpd0. I see a line that looks to me like it sets a variable for "mmcroot" and its set to mmcblk0p2, which is the current rootfs. Is this where I should plug in /dev/sdb1?
  • [04:00:14] * zkxs (~zkxs@129.244.128.133) Quit (Remote host closed the connection)
  • [04:01:00] <NovaKitty> It looks to me like its checking for a SD card, booting from it if present, otherwise booting from the eMMC.
  • [04:01:46] * zkxs (~zkxs@129.244.128.133) has joined #beagle
  • [04:02:39] <vagrantc> NovaKitty: sounds promising
  • [04:03:16] <frege> Dr{Wh0}: good link! thanks man!
  • [04:03:18] <vagrantc> you could set up your own uEnv.txt and put it on an sdcard, probably
  • [04:03:30] * zkxs (~zkxs@129.244.128.133) Quit (Remote host closed the connection)
  • [04:04:02] <frege> Dr{Wh0}: do you know what's RE http://hades.mech.northwestern.edu/images/8/82/Phototransistor_amplifiers.png
  • [04:04:13] <frege> what does E stand for there?
  • [04:04:37] <vagrantc> NovaKitty: just putting it on an SD card will allow you to revert back easily.
  • [04:04:55] * Sakai (7123b032@gateway/web/freenode/ip.113.35.176.50) Quit (Quit: Page closed)
  • [04:07:16] <Dr{Wh0}> Emitter resistance and Collector resistance.
  • [04:07:27] * prpplague (~prpplague@107-206-64-184.lightspeed.rcsntx.sbcglobal.net) has joined #beagle
  • [04:09:14] <frege> I don't think that pullup resistor should connect to ground
  • [04:09:17] <frege> doesn't make sense
  • [04:10:04] <Dr{Wh0}> its not actually a pullup its a bias resistor for the transistor cicruit.
  • [04:11:13] <NovaKitty> vagrantc: yeah i guess i can try. I can edit the fat boot partition from anything.
  • [04:12:19] <Dr{Wh0}> frege: to act as a switch I think your goal then you want a higher resitance value otherwise it is just an amplifier and is used to measer to amount of light.
  • [04:12:49] <frege> Dr{Wh0}: I want to measure the amount of light if it's possible
  • [04:12:57] <frege> Dr{Wh0}: how can I do that?
  • [04:13:30] <Dr{Wh0}> oh.. ok. lower restance value will give you an output of voltage you can measer with a AtoD circuit.
  • [04:14:06] <Dr{Wh0}> <5k but not too low where it will burn out the transistor 2-5k should be right dont go lower than 1k
  • [04:15:02] <frege> I will go 3.3k
  • [04:15:20] <frege> Dr{Wh0}: how can I measure it?
  • [04:15:28] <frege> I'm using P8_10
  • [04:17:03] <frege> Dr{Wh0}: can you give me a circuit please?
  • [04:17:06] <Dr{Wh0}> and A/D converter but a multimeter will do to test.
  • [04:17:31] <Dr{Wh0}> measure your voltage at Vout.
  • [04:18:14] <frege> Dr{Wh0}: http://stuffwemade.net/post/beaglebone-pinout
  • [04:18:18] <frege> where is Vout
  • [04:18:46] <Dr{Wh0}> oh.. no i ment vout from the circuit. on that page I posted.
  • [04:18:58] <frege> which one?
  • [04:19:01] <frege> ahah
  • [04:19:05] <Dr{Wh0}> does the bbb have an a/d? probably.
  • [04:19:19] <frege> hope so
  • [04:20:05] <Dr{Wh0}> to measure the low to high level use the Commond-Collector Amplifier bigger voltage = more light.
  • [04:20:30] <NovaKitty> vagranc: it looks like the change had no effect. The BBB booted normaly to the SD card. I went to "File System" in in the file manager and the capacity indicates it's still the sd card.
  • [04:20:52] <frege> Dr{Wh0}: yeah I made it
  • [04:20:58] <frege> but I'm getting 0
  • [04:21:08] <Dr{Wh0}> http://beaglebone.cameon.net/home/reading-the-analog-inputs-adc
  • [04:24:25] <frege> naaah something is fucked
  • [04:24:40] <Dr{Wh0}> we sure its a photo trans not a diode?
  • [04:24:53] <frege> Dr{Wh0}: what if it's a diode?
  • [04:25:00] <frege> I mean they could label it wrong
  • [04:25:06] <Dr{Wh0}> it will produce a very low signal needing aplification.
  • [04:25:13] <frege> I pasted the label
  • [04:25:27] <Dr{Wh0}> datasheet?
  • [04:25:33] <frege> >>> GPIO.input("P9_39")
  • [04:25:33] <frege> 0
  • [04:25:37] <frege> I keep getting 0
  • [04:26:00] <Dr{Wh0}> dont test with the BBB yet. you will break it :)
  • [04:26:06] <Dr{Wh0}> use a volt meter.
  • [04:27:03] <frege> Dr{Wh0}: http://www.tel.uva.es/personales/tri/pt481-e.pdf
  • [04:27:14] <frege> Dr{Wh0}: I think I've burned this one
  • [04:27:17] <frege> gonna use another one
  • [04:27:29] <frege> it's cheap though 0.98$
  • [04:27:47] <frege> gonna be back in 30 mins
  • [04:28:07] * gadgetoid (~gadgetoid@cpc11-nrwh9-2-0-cust593.4-4.cable.virginm.net) Quit (Ping timeout: 260 seconds)
  • [04:29:26] <Dr{Wh0}> they give you a test circuit and test values use those and test.
  • [04:35:21] <Dr{Wh0}> needs an input resistor to limit current or POOF <50m can go as high as 6v but i think you are doing 3v3? so use the drawing in that schematic but put a limiting resitore on Vcc you can calculate it to get your ~20ma 150ohm at 3v3
  • [04:35:41] <Dr{Wh0}> too late for this math. im out.. need food and zzz night all.
  • [04:38:06] * gadgetoid (~gadgetoid@cpc11-nrwh9-2-0-cust593.4-4.cable.virginm.net) has joined #beagle
  • [04:49:39] * dinesh_ (0fdbc944@gateway/web/freenode/ip.15.219.201.68) has joined #beagle
  • [04:49:43] * bhthompsonGD (~bhthompso@c-67-164-20-68.hsd1.ca.comcast.net) has joined #beagle
  • [04:51:16] * kingemer2 (~kingemer@69.169.157.172.provo.static.broadweavenetworks.net) Quit (Ping timeout: 240 seconds)
  • [04:51:58] * kingemer (~kingemer@69.169.157.172.provo.static.broadweavenetworks.net) has joined #beagle
  • [04:53:09] <dinesh_> hello
  • [04:53:19] <dinesh_> Hello , #include <stdio.h> #include <linux/gpio.h> int main() { const int is17Valid = !!gpio_is_valid(17); if (is17Valid) { printf("17 is valid!"); } else { printf("17 is not valid!"); } return 0; } i am trying to compile this program and getting this error gpio.h No such file or directory tried this in beaglebone black as well as with cross compiler getting same error pls help
  • [04:53:55] <dinesh_> Hello , #include <stdio.h> #include <linux/gpio.h> int main() { const int is17Valid = !!gpio_is_valid(17); if (is17Valid) { printf("17 is valid!"); } else { printf("17 is not valid!"); } return 0; } i am trying to compile this program and getting this error gpio.h No such file or directory tried this in beaglebone black as well as with cross compiler getting same error pls help
  • [04:55:49] * andrew00 (4f703099@gateway/web/freenode/ip.79.112.48.153) has joined #beagle
  • [04:58:29] * dinesh_ (0fdbc944@gateway/web/freenode/ip.15.219.201.68) Quit (Ping timeout: 250 seconds)
  • [05:00:00] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) Quit (Ping timeout: 246 seconds)
  • [05:00:13] * andrew00 (4f703099@gateway/web/freenode/ip.79.112.48.153) Quit (Ping timeout: 250 seconds)
  • [05:01:15] * JetForMe (~JetForMe@157.22.42.2) Quit (Ping timeout: 245 seconds)
  • [05:14:52] * kuldeepdhaka_ (~kuldeepdh@117.254.220.180) Quit (Ping timeout: 265 seconds)
  • [05:18:35] * zkxs (~zkxs@129.244.128.133) has joined #beagle
  • [05:20:20] * Guest86477 (~kuldeepdh@117.254.218.59) has joined #beagle
  • [05:20:23] * dap (dap_@unaffiliated/dap) has joined #beaglebone
  • [05:21:13] * dap (dap_@unaffiliated/dap) has joined #beagle
  • [05:21:39] * dap (dap_@unaffiliated/dap) has left #beaglebone
  • [05:21:48] * Guest86477 (~kuldeepdh@117.254.218.59) Quit (Max SendQ exceeded)
  • [05:25:12] * JetForMe (~JetForMe@c-50-156-127-148.hsd1.ca.comcast.net) has joined #beagle
  • [05:34:09] * Peuc (~Peuc@ip-50-21-134-236.dsl.netrevolution.com) Quit (Quit: Konversation terminated!)
  • [05:34:16] * mrpackethead (~mrpacketh@koruout.airnz.co.nz) has joined #beagle
  • [05:41:53] * mrpackethead (~mrpacketh@koruout.airnz.co.nz) Quit (Remote host closed the connection)
  • [05:55:46] * dap (dap_@unaffiliated/dap) Quit (Quit: sleep)
  • [06:06:20] * Jinx (~Jinx@unaffiliated/jinx) Quit (Read error: Connection reset by peer)
  • [06:08:02] * zeroem (~dhamilton@76.89.160.217) has joined #beagle
  • [06:19:42] * bhthompsonGD (~bhthompso@c-67-164-20-68.hsd1.ca.comcast.net) Quit (Remote host closed the connection)
  • [06:30:33] * kuldeepdhaka (~kuldeepdh@117.254.216.53) has joined #beagle
  • [06:38:03] * kuldeepdhaka (~kuldeepdh@117.254.216.53) Quit (Ping timeout: 245 seconds)
  • [06:39:10] * tasslehoff (~tasslehof@77.40.182.98) has joined #beagle
  • [06:55:47] * Terminus (~null@unaffiliated/terminus) has joined #beagle
  • [06:56:53] * flo_lap (~fuchs@Maemo/community/contributor/florian) Quit (Ping timeout: 252 seconds)
  • [06:59:46] * bhthompsonGD (~bhthompso@c-67-164-20-68.hsd1.ca.comcast.net) has joined #beagle
  • [07:02:37] * bearsh|work (~quassel@189-92.77-83.cust.bluewin.ch) has joined #beagle
  • [07:11:04] * rob_w (~bob@unaffiliated/rob-w/x-1112029) has joined #beagle
  • [07:26:30] * NulL` (~bleh1@87.254.66.16) has joined #beagle
  • [07:29:08] * christoffer (~christoff@130.243.94.123) has joined #beagle
  • [07:32:41] * RichardPotthoff_ (~richardpo@c-68-38-232-139.hsd1.nj.comcast.net) Quit (Ping timeout: 240 seconds)
  • [07:33:23] * emeb_mac (~ericb@ip70-176-233-148.ph.ph.cox.net) Quit (Quit: emeb_mac)
  • [07:35:07] * tema (~tema@88.128.80.2) has joined #beagle
  • [07:37:03] * RichardPotthoff (~richardpo@c-68-38-232-139.hsd1.nj.comcast.net) has joined #beagle
  • [07:38:51] * Freddie_ (bc0da48f@gateway/web/freenode/ip.188.13.164.143) has joined #beagle
  • [07:41:56] * c10ud (~c10ud@emesene/dictator/c10ud) has joined #beagle
  • [07:42:12] <Freddie_> HI all
  • [07:42:24] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Remote host closed the connection)
  • [07:44:01] * lyakh (~lyakh@dslb-088-076-022-046.pools.arcor-ip.net) has joined #beagle
  • [07:44:02] <Freddie_> How can I read the "value" content of more gpio and collect them to form a binary string with a single command (or script)??
  • [07:44:43] * viv__ (b752618a@gateway/web/freenode/ip.183.82.97.138) has joined #beagle
  • [07:44:45] <Freddie_> (perhaps more of a shell question than a beagle specific one...)
  • [07:45:03] * Nedlinpopo (~james@dsl092-043-139.lax1.dsl.speakeasy.net) has joined #beagle
  • [07:45:32] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [07:45:51] <Nedlinpopo> Has anyone fully understood the BBB USB problems yet?
  • [07:46:24] <Nedlinpopo> I've seen many things suggesting noise/EMI on the data lines
  • [07:46:29] <viv__> hi
  • [07:46:39] <Nedlinpopo> and core voltage switching etc.
  • [07:46:44] <Nedlinpopo> viv__: hello
  • [07:56:40] * eballetbo (~eballetbo@43.Red-2-139-180.staticIP.rima-tde.net) has joined #beagle
  • [07:59:13] * bhthompsonGD (~bhthompso@c-67-164-20-68.hsd1.ca.comcast.net) Quit (Remote host closed the connection)
  • [08:01:58] * NulL`` (~bleh1@87.254.66.16) has joined #beagle
  • [08:01:58] * NovaKitty (~Nova@76-217-29-151.lightspeed.yrlnca.sbcglobal.net) Quit (Quit: Leaving)
  • [08:02:46] * NulL` (~bleh1@87.254.66.16) Quit (Ping timeout: 272 seconds)
  • [08:06:00] * das (~das@217.108.83.254) Quit (Remote host closed the connection)
  • [08:09:50] * dogmatic69 (~dogmatic6@cpc10-telf10-2-0-cust20.wolv.cable.virginm.net) has joined #beagle
  • [08:14:47] * viv__ (b752618a@gateway/web/freenode/ip.183.82.97.138) Quit (Ping timeout: 250 seconds)
  • [08:15:25] * NulL`` (~bleh1@87.254.66.16) Quit (Ping timeout: 272 seconds)
  • [08:16:19] * das (~das@217.108.83.254) has joined #beagle
  • [08:21:11] * kuldeepdhaka (~kuldeepdh@117.254.223.208) has joined #beagle
  • [08:22:34] * uv (~uv@94-21-51-144.pool.digikabel.hu) has joined #beagle
  • [08:25:17] * kuldeepdhaka (~kuldeepdh@117.254.223.208) Quit (Max SendQ exceeded)
  • [08:28:48] * panto (~panto@to-18-64-177.service.infuturo.it) has joined #beagle
  • [08:28:48] * florian_kc (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [08:30:24] * dwery (~dwery@nslu2-linux/dwery) has joined #beagle
  • [08:30:26] * florian_kc is now known as florian
  • [08:33:19] * mythos (~mythos@unaffiliated/mythos) Quit (Ping timeout: 252 seconds)
  • [08:45:51] * viv__ (b752618a@gateway/web/freenode/ip.183.82.97.138) has joined #beagle
  • [08:45:55] * zeroem (~dhamilton@76.89.160.217) has left #beagle
  • [08:46:26] * f-zombie (~gplgeek@pdpc/supporter/student/GPLGeek) has joined #beagle
  • [08:47:43] * Freddie_ (bc0da48f@gateway/web/freenode/ip.188.13.164.143) Quit (Ping timeout: 250 seconds)
  • [08:49:26] * fzombie (fzombie@pdpc/supporter/student/GPLGeek) Quit (Ping timeout: 240 seconds)
  • [08:49:44] * rob_w (~bob@unaffiliated/rob-w/x-1112029) Quit (Remote host closed the connection)
  • [08:52:12] * bfederau (~quassel@service.basyskom.com) has joined #beagle
  • [08:53:41] * mag (~mgreer@ip68-3-92-114.ph.ph.cox.net) Quit (Ping timeout: 272 seconds)
  • [08:55:10] * kiilo (~kiilo@77-56-99-130.dclient.hispeed.ch) has joined #beagle
  • [08:55:24] * mag (~mgreer@ip68-3-92-114.ph.ph.cox.net) has joined #beagle
  • [08:55:48] * mag is now known as Guest5247
  • [08:56:23] * capa66 (~capa66@unaffiliated/capa66) Quit (Ping timeout: 245 seconds)
  • [09:07:11] * uv (~uv@94-21-51-144.pool.digikabel.hu) Quit (Remote host closed the connection)
  • [09:07:27] * Emi (~Emi@cpe-76-176-71-218.san.res.rr.com) has joined #beagle
  • [09:14:52] * flowsnake (~flowsnake@cpc26-aztw25-2-0-cust894.aztw.cable.virginm.net) Quit (Ping timeout: 264 seconds)
  • [09:14:56] <viv__> hi
  • [09:16:34] * flowsnake (~flowsnake@cpc26-aztw25-2-0-cust894.aztw.cable.virginm.net) has joined #beagle
  • [09:21:17] * bizulk (~sli@h67.cornut.fr) Quit (Ping timeout: 272 seconds)
  • [09:23:27] * Shadyman (~matthew@unaffiliated/shadyman) Quit (Quit: Leaving.)
  • [09:24:52] * mythos (~mythos@unaffiliated/mythos) has joined #beagle
  • [09:33:37] * vvu|Log_away is now known as vvu|Log
  • [09:36:40] * bizulk (~sli@h67.cornut.fr) has joined #beagle
  • [09:36:40] * bizulk (~sli@h67.cornut.fr) has joined #beagleboard
  • [09:38:07] * acidfu (~nib@unaffiliated/acidmen) Quit (Ping timeout: 246 seconds)
  • [09:38:51] * viv__ (b752618a@gateway/web/freenode/ip.183.82.97.138) Quit (Ping timeout: 250 seconds)
  • [09:42:34] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [09:52:41] * vvv_ (b752618a@gateway/web/freenode/ip.183.82.97.138) has joined #beagle
  • [09:56:32] * Jalal (55fa6ca1@gateway/web/freenode/ip.85.250.108.161) has joined #beagle
  • [09:56:50] * Jalal (55fa6ca1@gateway/web/freenode/ip.85.250.108.161) Quit (Client Quit)
  • [10:05:13] * acidfu (~nib@24.37.17.210) has joined #beagle
  • [10:05:13] * acidfu (~nib@24.37.17.210) Quit (Changing host)
  • [10:05:13] * acidfu (~nib@unaffiliated/acidmen) has joined #beagle
  • [10:08:16] <Uninstall_> Hello
  • [10:09:03] <Uninstall_> can I use BBW miniusb/serial to type commands into u-boot?
  • [10:09:06] * RichardPotthoff_ (~richardpo@c-68-38-232-139.hsd1.nj.comcast.net) has joined #beagle
  • [10:09:37] * RichardPotthoff (~richardpo@c-68-38-232-139.hsd1.nj.comcast.net) Quit (Read error: Connection reset by peer)
  • [10:10:47] <av500> yes
  • [10:11:13] <Uninstall_> av500: cool... I'm trying to do that with minicom but I don't see any echo or any uboot prompt
  • [10:11:28] <Uninstall_> it doesn't react at all
  • [10:11:46] <av500> hmm
  • [10:12:14] <av500> nothing at all in the terminal?
  • [10:12:35] <Uninstall_> no
  • [10:12:48] <av500> 115200 8.n.1?
  • [10:12:55] <av500> no flow control
  • [10:13:01] <Uninstall_> 115200 8N1
  • [10:13:11] <Uninstall_> Sf Flow Control: No
  • [10:13:16] <Uninstall_> Hw Flow Control: No
  • [10:13:18] <av500> ok
  • [10:13:31] <av500> press reset
  • [10:13:39] <av500> er
  • [10:13:42] <av500> SD card inside?
  • [10:13:49] <av500> and somthing on it?
  • [10:13:51] <Uninstall_> av500: no sd card
  • [10:15:00] * capa66 (~capa66@unaffiliated/capa66) Quit (Ping timeout: 245 seconds)
  • [10:15:11] <Uninstall_> av500: If I press reset I get this: "CCCCCCCC" printed out on minicom
  • [10:15:29] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [10:18:30] <Uninstall_> av500: do I need to have u-boot on my SD card?
  • [10:18:53] * avRoogh3 (~julian@91-65-128-71-dynip.superkabel.de) has joined #beaglebone
  • [10:22:07] <av500> er yes
  • [10:22:17] <av500> CCC is the ROM code begging to be fed with data
  • [10:23:06] <Uninstall_> av500: where can I get some u-boot stock image?
  • [10:23:41] <av500> http://www.angstrom-distribution.org/demo/beaglebone/
  • [10:23:49] <Uninstall_> thank you
  • [10:30:03] * qdk (~qdk@ip1945.frb300.cust.comxnet.dk) Quit (Ping timeout: 246 seconds)
  • [10:30:17] <avRoogh3> is there a recommended way to build my own (Debian) eMMC images? ideally i'd like to customise what i have already running on the board (I have the BBB) and write it to sdcard where I can use the helper script (https://github.com/RobertCNelson/tools/blob/master/scripts/beaglebone-black-copy-microSD-to-eMMC.sh) to flash it.
  • [10:33:13] * tema (~tema@88.128.80.2) Quit (Ping timeout: 252 seconds)
  • [10:33:34] * kilnaar (~kilnaar@c-98-236-141-239.hsd1.pa.comcast.net) has joined #beagle
  • [10:37:19] * dys (~user@2a01:1e8:e100:8296:21a:4dff:fe4e:273a) has joined #beagle
  • [10:39:58] * vvu|Log is now known as vvu|Log_away
  • [10:53:30] * Emi (~Emi@cpe-76-176-71-218.san.res.rr.com) Quit (Ping timeout: 246 seconds)
  • [10:54:36] * Emi (~Emi@cpe-76-176-71-218.san.res.rr.com) has joined #beagle
  • [10:56:59] * tema (~tema@88.128.80.7) has joined #beagle
  • [11:05:25] * tema (~tema@88.128.80.7) Quit (Ping timeout: 245 seconds)
  • [11:13:47] <ragnar76> anyone has an idea why mp3s are not playing on a bbb using mplayer? i mean, they play but i have no hearable output
  • [11:14:02] <av500> over hdmi?
  • [11:14:11] <av500> connected to?
  • [11:14:17] <ragnar76> av500: no, an usb soundcard
  • [11:14:37] <ragnar76> it plays wav, flac, ogg, ... fine but not mp3s
  • [11:14:39] <av500> alsamixer?
  • [11:14:42] <av500> oh
  • [11:15:02] <av500> maybe you dont have the patent license?
  • [11:15:27] * priyanka (b752618a@gateway/web/freenode/ip.183.82.97.138) has joined #beagle
  • [11:15:50] <ragnar76> a license? with mplayer?
  • [11:16:25] <av500> :)
  • [11:16:28] <priyanka> hello
  • [11:18:41] <av500> ragnar76: run with -vvv and see difference between mp3 and wav
  • [11:23:25] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) Quit (Remote host closed the connection)
  • [11:23:44] <av500> ragnar76: try -ao pcm and try to play the pcm file
  • [11:24:09] <av500> priyanka: ask here
  • [11:24:11] * janne (~janne@sianko.jannau.net) has joined #beagle
  • [11:24:16] <av500> or send money
  • [11:24:26] <av500> why would I answer you in pm?
  • [11:24:59] <ragnar76> av500: -ao pcm does not work either
  • [11:25:18] <av500> but it works for e.g flac?
  • [11:25:24] <av500> what is the error?
  • [11:25:26] * qdk (~qdk@188.120.76.162) has joined #beagle
  • [11:25:34] <av500> mplayer from angstrom feed?
  • [11:25:52] <ragnar76> gnarf, -ao pcm writes a wav file. i was expecting sound :/
  • [11:26:08] <ragnar76> so, it works
  • [11:26:44] <av500> the wav file works?
  • [11:26:50] <av500> hmm
  • [11:26:54] <ragnar76> but, the audiodump is pure silence
  • [11:26:57] <av500> ah
  • [11:27:10] <av500> ic
  • [11:28:08] * rob_w (~bob@unaffiliated/rob-w/x-1112029) has joined #beagle
  • [11:34:12] <konradoo77> https://gns3.crowdhoster.com/become-an-early-release-member
  • [11:34:33] * ubitux (~ux@did75-21-88-189-231-41.fbx.proxad.net) has joined #beagle
  • [11:34:36] <janne> ragnar76: please try mplayer --ac=ffmp3
  • [11:40:52] <av500> ragnar76: try another mp3 file?
  • [11:40:55] <av500> not John Cage
  • [11:43:32] <janne> or at least a different track than 4'33"
  • [11:43:42] <ragnar76> that works!
  • [11:45:18] <janne> what? --ac=ffmp3?
  • [11:45:54] <ragnar76> yes, that works
  • [11:47:20] <priyanka> hi this is priyanka a student from India, having interest on embedded systems domain. I got introduced to BBB and by far my experience with BBB is enriching, I would like to take this experience forward and try and understand things in more depth. In this journey of my learning I would like to be associated with one of you geeks and take my learning to the next level. please let me know if I can be associated with one of you
  • [11:47:36] <av500> no
  • [11:47:40] <av500> we dont 1:1 mentor people here
  • [11:47:47] <av500> at least not for free
  • [11:47:55] <av500> we help in answering questions
  • [11:48:00] <priyanka> okay
  • [11:48:05] <av500> and there is ample information out there on the internet
  • [11:48:09] <av500> blog posts
  • [11:48:12] <av500> mailing lists
  • [11:48:16] <av500> youtub videos
  • [11:48:20] <av500> etc...
  • [11:48:22] <av500> books
  • [11:48:42] <priyanka> okay thanks
  • [11:50:50] * konradoo77 (~debian@user-31-174-251-185.play-internet.pl) Quit (Ping timeout: 245 seconds)
  • [11:52:07] * priyanka (b752618a@gateway/web/freenode/ip.183.82.97.138) has left #beagle
  • [11:52:29] * f-zombie (~gplgeek@pdpc/supporter/student/GPLGeek) Quit (Ping timeout: 240 seconds)
  • [11:52:40] * konradoo77 (~debian@user-188-33-2-130.play-internet.pl) has joined #beagle
  • [11:59:11] * suihkulokki notes the beaglebone sd card formatting script was written by XorA
  • [12:00:29] <av500> yes
  • [12:00:37] <av500> including the magic values
  • [12:01:39] * nighty^ (~nighty@lns-bzn-49f-62-147-170-46.adsl.proxad.net) Quit (Quit: leaving)
  • [12:04:43] <XorA> magic values?
  • [12:05:14] * tema (~tema@88.128.80.2) has joined #beagle
  • [12:05:21] <ogra_> abracadabra factor
  • [12:06:20] * XorA does not remember any magic
  • [12:07:21] <suihkulokki> looks remarkably less magical than many of the other "oh we need something to make bootable sd card" scripts I'm checking
  • [12:07:25] * vvv_ (b752618a@gateway/web/freenode/ip.183.82.97.138) Quit (Quit: Page closed)
  • [12:09:20] <XorA> denix: is to blame for any magic anyway, I just scripted it
  • [12:15:49] * capa66 (~capa66@unaffiliated/capa66) Quit (Ping timeout: 272 seconds)
  • [12:16:23] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [12:19:00] * tema (~tema@88.128.80.2) Quit (Read error: Operation timed out)
  • [12:21:07] * TooLmaN (~TooLmaN@mail.thomsonplastics.com) has joined #beagle
  • [12:21:24] <av500> echo ,9,0x0C,*
  • [12:21:41] <av500> try it with 8 or 10 on omap3 :)
  • [12:21:59] * av500 foods
  • [12:22:09] * capa66 (~capa66@unaffiliated/capa66) Quit (Ping timeout: 272 seconds)
  • [12:22:36] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [12:26:39] * jkridner (~jkridner@c-98-250-142-42.hsd1.mi.comcast.net) has joined #beagle
  • [12:26:39] * jkridner (~jkridner@c-98-250-142-42.hsd1.mi.comcast.net) Quit (Changing host)
  • [12:26:39] * jkridner (~jkridner@pdpc/supporter/active/jkridner) has joined #beagle
  • [12:26:39] * ChanServ sets mode +o jkridner
  • [12:33:31] * kaliatech (~kaliatech@c-71-58-91-18.hsd1.pa.comcast.net) has joined #beagle
  • [12:39:43] * konradoo77 (~debian@user-188-33-2-130.play-internet.pl) Quit (Ping timeout: 245 seconds)
  • [12:40:04] * kilnaar (~kilnaar@c-98-236-141-239.hsd1.pa.comcast.net) Quit (Quit: kilnaar)
  • [12:41:34] * konradoo77 (~debian@user-31-174-251-185.play-internet.pl) has joined #beagle
  • [12:45:04] * mythos (~mythos@unaffiliated/mythos) Quit (Read error: Operation timed out)
  • [12:47:37] * breakds (~breakds@c-24-0-147-122.hsd1.nj.comcast.net) has joined #beagle
  • [12:47:52] * avRoogh3 (~julian@91-65-128-71-dynip.superkabel.de) Quit (Ping timeout: 264 seconds)
  • [12:52:11] * jmoyerman (~josh@68.202.202.139) Quit (Ping timeout: 272 seconds)
  • [12:52:37] * jmoyerman (~josh@68.202.202.139) has joined #beagle
  • [12:56:42] * uv (~uv@94-21-51-144.pool.digikabel.hu) has joined #beagle
  • [13:02:55] * jmoyerman (~josh@68.202.202.139) Quit (Ping timeout: 245 seconds)
  • [13:03:18] * jmoyerman (~josh@68.202.202.139) has joined #beagle
  • [13:07:43] * DJW|Home (~djwillis@cpc2-trow6-2-0-cust204.aztw.cable.virginm.net) has joined #beagle
  • [13:08:03] * bizarro_1 (~bizarro_1@9.Red-83-49-231.dynamicIP.rima-tde.net) has joined #beagle
  • [13:10:41] * Sam___ (67157c4d@gateway/web/freenode/ip.103.21.124.77) has joined #beagle
  • [13:10:57] <Sam___> hello
  • [13:11:50] * DJWillis (~djwillis@cpc2-trow6-2-0-cust204.aztw.cable.virginm.net) Quit (Ping timeout: 272 seconds)
  • [13:13:28] <Sam___> I build new Angstrom based image for BeagleBone black as per steps on eLinux.org but only user LEDs on BBB working .It is not detected by PC like with factory image ?
  • [13:13:49] <av500> do you have a serial cable?
  • [13:13:56] <Sam___> No
  • [13:14:46] <Sam___> I just delete uImage-3.8.13 and replace it with my uImage
  • [13:15:40] <av500> well networking is hard to debug if you are blind
  • [13:15:57] <av500> when you put back the uimage it works again?
  • [13:16:42] <Sam___> if I put original uImage its again work fine
  • [13:17:46] <Sam___> Its user LEDs are blinking propery with new uImage but can't access via PC
  • [13:19:17] <Sam___> hello
  • [13:20:40] <KotH> echo
  • [13:22:01] <Sam___> So what to do now ? Can use normal USB cable for serial debugging ?
  • [13:22:38] <KotH> yes, yo can use a normal 3.3V serial2usb usb cable for serial debugging
  • [13:24:47] <Sam___> 3.3 v means ? can I use only GND,USB+,USB- as GND.RX,TX for that in case of normal USB wire ?
  • [13:26:05] <av500> no
  • [13:26:09] <av500> 6 pin serial header
  • [13:26:15] <av500> you need a usb2ttl cable
  • [13:26:22] <av500> like $5 on ebay
  • [13:28:45] * myself (~myself@ignignokt.mudkips.net) Quit (Ping timeout: 252 seconds)
  • [13:28:52] * myself (~myself@ignignokt.mudkips.net) has joined #beagle
  • [13:29:23] * Sam___ (67157c4d@gateway/web/freenode/ip.103.21.124.77) Quit (Ping timeout: 250 seconds)
  • [13:30:29] * sam___ (67157c4d@gateway/web/freenode/ip.103.21.124.77) has joined #beagle
  • [13:33:42] <sam___> Can we delete factory uImage of BeagleBone black and replace it with newly build Image to verify it ?
  • [13:33:42] <KotH> nope, we cannot do that
  • [13:33:42] <KotH> you can't for obvious reasony, and i dont own a bbb
  • [13:33:42] <KotH> reasons*
  • [13:33:42] * KotH no typy today
  • [13:33:42] <KotH> and not enough chocolate too
  • [13:33:42] * BeagleBot (~PircBot@ec2-75-101-156-174.compute-1.amazonaws.com) Quit (Ping timeout: 252 seconds)
  • [15:45:36] * BeagleBot (~PircBot@ec2-75-101-156-174.compute-1.amazonaws.com) has joined #beagle
  • [15:45:36] * Topic is 'http://beagleboard.org/chat has a guide on how to ask questions and links to the logs | never ask to ask, just ask | be patient | pastebin a boot log | http://ahsoftware.de/Beaglebone_Black_Boot_explained.svg'
  • [15:45:36] * Set by KotH!~attila@lou-outside.kinali.ch on Tue Oct 29 07:13:11 CDT 2013
  • [15:45:36] * BeagleBot (~PircBot@ec2-75-101-156-174.compute-1.amazonaws.com) has joined #beagleboard
  • [15:45:36] * BeagleBot (~PircBot@ec2-75-101-156-174.compute-1.amazonaws.com) has joined #beaglebone
  • [15:45:53] <SpeedEvil> Much of the time I'm in a very similar state.
  • [15:45:55] <jkridner> Integration into Angstrom images and Debian images, right? What else?
  • [15:46:00] <SpeedEvil> After, for example, doing the washing up.
  • [15:46:07] <SpeedEvil> Anyway - off topic.
  • [15:46:13] <thews> jkridner: that's all that matters to the majority I think
  • [15:46:46] <_vicash_> jkridner: if OpenGL libraries can use the native SGX driver to run that will be great. i think the kernel driver for SGX should be handling that seamlessly
  • [15:46:58] <KotH> SpeedEvil: you're in #beagle
  • [15:47:06] <KotH> SpeedEvil: being on-topic is off-topic here
  • [15:47:33] <jkridner> hmmm... http://logs.nslu2-linux.org/livelogs/beagle/beagle.20131122.txt log seems incomplete.
  • [15:47:50] <thews> for smaller channels staying fully on topic stifles ideas
  • [15:48:15] <SpeedEvil> To restate it - I'm not especially interested in conversing about this in depth. If it was found that cutting my legs off would cure me, I'd have them off tomorrow. I've been doing research into actual clinical outcomes and there is nothing promising.
  • [15:48:15] * jkridner sees nslu2-log
  • [15:48:23] <jkridner> guess it takes a while to refresh?
  • [15:48:32] <thews> must
  • [15:48:54] * f11f12 (~f11f12@2a02:908:f310:4481:5cd9:782c:8afd:7f1d) has joined #beagle
  • [15:51:48] <thews> SpeedEvil: I sent you a pm
  • [15:55:33] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [15:56:25] * kilnaar (~kilnaar@gateway.dvdempire.com) has joined #beagle
  • [15:57:29] <_vicash_> jkridner: maybe you could contact Robert Nelson to get an idea of how much effort it would take to port the SGX from Android JB to Angstrom.
  • [15:58:30] * dugr16otta (~dugr16ott@164.Red-83-33-106.dynamicIP.rima-tde.net) has joined #beagle
  • [15:58:48] * dugr16otta is now known as dury
  • [15:58:50] <thews> if the android jb is on 3.2 as someone said earlier it would be completely different
  • [15:59:04] <thews> but a few TI documents showed 3.8 and 3.12
  • [15:59:12] <thews> one specifically said they were testing 3.8
  • [16:00:53] <thurgood> what port of sgx? they're running a kernel that is still supported
  • [16:00:56] <dury> hi there channel :-) I've just ordered yesterday beagleboard black :-)
  • [16:01:25] <thurgood> namely 3.2
  • [16:01:51] <thurgood> they've just adapted the kernel to run with the bbb
  • [16:01:58] <dury> one unit 56 ? I guess
  • [16:02:24] <dury> what other accessories can I add to it?
  • [16:02:35] <_vicash_> thurgood: if you try to build Angstrom from scratch there is only the option to run linux 3.7 or 3.8 .. if 3.2 works shouldn't that be an option for those who need SGX support
  • [16:02:45] * f11f12 (~f11f12@2a02:908:f310:4481:5cd9:782c:8afd:7f1d) Quit (Ping timeout: 252 seconds)
  • [16:03:13] <dury> a touchscreen display is it possible?
  • [16:03:20] <thurgood> 3.2 default does not support the bbb
  • [16:03:22] <thews> dury: since the BBB has several interfaces there are almost unlimited possibilities
  • [16:03:48] <_vicash_> dury: yes there are many possibilities check elinux.org for more details on what you can do with LCDs and which LCDs to pick
  • [16:03:55] <thews> dury: there are touchscreen capes, also you can use hdmi + another interface
  • [16:05:35] <dury> are there any video on youtube or whatever to see the possibilities?
  • [16:06:19] <_vicash_> dury: Yes please read this guy's blog . he does a lot of work on the BBB and has great tutorial videos http://derekmolloy.ie/beaglebone/
  • [16:07:22] <dwery> dury: check the cape list
  • [16:07:40] * capa66 (~capa66@unaffiliated/capa66) Quit (Ping timeout: 246 seconds)
  • [16:07:43] <jkridner> _vicash_: he's already looking at it
  • [16:08:12] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [16:08:26] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) has joined #beagle
  • [16:08:39] <_vicash_> jkridner: that's cool
  • [16:08:45] <dury> dwery cape list... sorry to ask ... but where is it
  • [16:09:07] <dwery> dury: http://elinux.org/Beagleboard:BeagleBone_Capes
  • [16:10:10] * emeb (~ericb@ip70-176-233-148.ph.ph.cox.net) has joined #beagle
  • [16:11:37] * falstaff_ (~quassel@62-12-202-152.pool.cyberlink.ch) has joined #beaglebone
  • [16:11:37] * falstaff_ (~quassel@62-12-202-152.pool.cyberlink.ch) has joined #beagle
  • [16:12:18] <ubitux> any arm64 beagle boards available?
  • [16:13:03] * f11f12 (~f11f12@2a02:908:f310:4481:5cd9:782c:8afd:7f1d) has joined #beagle
  • [16:13:11] <thews> ubitux: I don't think any arm64 popular devboards will be around for a while
  • [16:13:40] <ubitux> that's unfortunate
  • [16:13:41] <dury> dwery: so I can use BBB as personal computer as well
  • [16:13:51] * falstaff (~quassel@62-12-226-036.pool.cyberlink.ch) Quit (Ping timeout: 252 seconds)
  • [16:14:01] <dwery> well..it depends on what you want to do with it
  • [16:14:44] <thews> ubitux: http://microcontrollershop.com/product_info.php?products_id=4129 pretty cheap, but the popular arm64 stuff is just getting started
  • [16:14:46] <dury> what are the possibilities then?
  • [16:15:38] <dwery> dury: embedded, home automation, micro server, etc
  • [16:16:09] * calcifea (~rasla@gateway/tor-sasl/gitsu-sa) Quit (Quit: calcifea)
  • [16:16:20] <thews> dury: you might be interested in ninja blocks, which use BBB
  • [16:16:37] <thews> http://ninjablocks.com/collections/ninja-blocks/products/ninja-shield-for-beaglebone-black
  • [16:17:23] <_vicash_> dury: you can run Debian on the BBB and use it as a Linux PC to do things except run 3D software. it maybe be slightly slower than an x86 PC depending on what you're trying to do but otherwise works fine. I build display software that runs on the BBB connected to a TV via HDMI
  • [16:17:25] * calcifea (~rasla@gateway/tor-sasl/gitsu-sa) has joined #beagle
  • [16:17:50] <thews> or watch videos in many formats
  • [16:18:45] <thews> arm7 devices are considerably slower than atom x86 for almost everything unless there are onboard chips that handle specific tasks
  • [16:19:10] * f11f12 (~f11f12@2a02:908:f310:4481:5cd9:782c:8afd:7f1d) Quit (Quit: ziiiip)
  • [16:19:18] <thews> but they're much cheaper and can accomplish a wide range of tasks very well
  • [16:22:17] * elyezer (b1420402@gateway/web/freenode/ip.177.66.4.2) Quit (Ping timeout: 250 seconds)
  • [16:22:59] <bbm> hii
  • [16:23:23] <bbm> can anyone please see why this is coming
  • [16:23:36] <bbm> file included from /myspace/board-support/board-port-labs/sitara-board-port-uboot/include/image.h:37, from aisimage.c:29: /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead! In file included from aisimage.c:29: /myspace/board-support/board-port-labs/sitara-board-port-uboot/include/image.h:190: error: syntax error before "__be32" /myspace/board-support/board-port-
  • [16:23:54] <dury> can I connect a sata HD with BBB?
  • [16:24:12] <bbm> i am cmpiling the u boot
  • [16:25:11] <_vicash_> bbm: u-boot has a separate channel on #u-boot . you will get more help there
  • [16:25:30] <bbm> thanks
  • [16:25:30] <_vicash_> dury: via USB you can connect anything to the BBB
  • [16:28:23] <dury> can it build a dronner?
  • [16:28:38] * bbm (7aa9dbc3@gateway/web/freenode/ip.122.169.219.195) Quit (Quit: Page closed)
  • [16:28:57] * sharebrained (~sharebrai@mail.sharebrained.com) has joined #beagle
  • [16:31:08] <dury> a drone I mean sorry
  • [16:32:00] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit (Remote host closed the connection)
  • [16:32:29] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) has joined #beagle
  • [16:32:46] <ubitux> dury: yes; as said, everything is through usb, so you have to plug this and you're done: https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcQyULr0l0OVhR-UgjrPOuwmUruqV9Ca00CKloVau1ZsuVvoaqmD
  • [16:34:21] <dury> ubitux all right
  • [16:34:24] <Nedlinpopo> have any of you guys had awesome hard lockups with a *lot* of USB traffic?
  • [16:34:45] * flufmnstr (~rawr@66-215-175-118.dhcp.snbr.ca.charter.com) Quit (Ping timeout: 272 seconds)
  • [16:34:51] <thews> Nedlinpopo: I've had strange lockups, but I don't know what to account it to
  • [16:34:52] * kevinsc (~kevinsc@nat/ti/x-ldzmceycajelwahz) has joined #beagle
  • [16:34:57] * kevinsc (~kevinsc@nat/ti/x-ldzmceycajelwahz) has left #beagle
  • [16:35:03] <ubitux> (dury: that was a joke, right?)
  • [16:35:21] <Nedlinpopo> thews: do you have any USB devices attached which do big bulk transfers?
  • [16:35:28] <dury> no worries
  • [16:35:56] <Nedlinpopo> i.e. cameras, network dongles, GSM modems, some soundcards
  • [16:36:15] <thews> Nedlinpopo: I've maxed out usb on data transfer, and I've had a few lockups early on, I'm not sure if it was because of wifi drivers that also gave me problems, or usb drive or what
  • [16:36:30] <Nedlinpopo> bummer
  • [16:36:33] <thews> Nedlinpopo: I also have video and sound through hdmi, but usually don't run X
  • [16:36:45] <thews> Nedlinpopo: everything is much more stable now
  • [16:36:51] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit (Ping timeout: 246 seconds)
  • [16:36:55] <thews> Nedlinpopo: the major thing was compiling my own wifi driver
  • [16:36:55] <Nedlinpopo> what kernel are you running?
  • [16:37:10] <Nedlinpopo> (with which patches)
  • [16:37:11] <thews> 3.8.13-bone20 or 30 I think
  • [16:37:14] <thews> not at home right now
  • [16:37:55] * LordDVG (~LordDVG@unaffiliated/lorddvg) has joined #beagle
  • [16:37:56] <Nedlinpopo> where did you get the source?
  • [16:37:59] <thews> Nedlinpopo: https://github.com/justinledwards/beaglebone-debian-scripts/blob/master/wireless-fix.sh
  • [16:38:08] <Nedlinpopo> great
  • [16:38:10] <Nedlinpopo> thanks
  • [16:38:10] <thews> that's some of the stuff I did for the wireless drivers
  • [16:39:22] <Nedlinpopo> My work had had some serious sucking with USB, and on the previous project there wasn't time to debug it, but now i'm getting back to it. Hopefully I'll fix it for good. I've heard rumors of EMI/noise issues as well there.
  • [16:39:39] <thews> I haven't had those problems with the BBB
  • [16:39:58] <thews> I've majority had those problems when working with long traces / wires with other ICs
  • [16:40:04] <thews> majorly
  • [16:40:17] <Nedlinpopo> heh, you know the sayuing:
  • [16:40:18] * bizarro_1 (~bizarro_1@18.Red-88-19-138.staticIP.rima-tde.net) has joined #beagle
  • [16:40:47] <Nedlinpopo> "there are 2 kinds of electrical engineers, those with Signal integrity problems, and those who will have them"
  • [16:40:58] <thews> definitely
  • [16:41:21] <thews> I toss capacitors on most things now and try to keep the busses as short as possible
  • [16:41:50] <Nedlinpopo> my rule of thumb is one cap per power pin
  • [16:41:54] <thews> not worth the complications that happen otherwise
  • [16:42:18] <thews> I put a cap on every IC that takes / pushes signaling if they're not really close together
  • [16:42:28] <thews> and cap the power on input and output
  • [16:42:51] <thews> if there is voltage regulation / conversion
  • [16:43:26] <Nedlinpopo> i'm always leery ov caps on signal wires, but otherwise sound advice
  • [16:43:49] <Nedlinpopo> also, apparently i can't type to save my life today
  • [16:43:55] <thews> for SPI you can cap the latch I think, that's about all for signalling
  • [16:44:44] * _vicash_ (~vicash@208.123.162.2) has left #beagle
  • [16:44:46] * bpetersen (46590045@gateway/web/freenode/ip.70.89.0.69) has joined #beagle
  • [16:46:16] <dury> all right guys... really appreciate your suggestions. I'll be back in other time cheeerss :-)
  • [16:46:21] <thews> yeah capacitor on the latch pin for SPI doesn't hurt, stops flickering
  • [16:47:34] <Nedlinpopo> sounds plausible. some chips rely on set-up time from that, but probably fine mostly
  • [16:47:34] * emeb (~ericb@ip70-176-233-148.ph.ph.cox.net) Quit (Read error: Connection reset by peer)
  • [16:47:58] * ogra_ (~ogra_@p5098ed03.dip0.t-ipconnect.de) Quit (Read error: Operation timed out)
  • [16:48:06] * emeb (~ericb@ip70-176-233-148.ph.ph.cox.net) has joined #beagle
  • [16:48:52] <bpetersen> Anyone know good chats about electrical design? For example, I have a power mosfet and I want to test the output current using a load resistor. How do I determine a good power rating for the load resistor
  • [16:50:33] * prpplague (~danders@rrcs-97-77-26-26.sw.biz.rr.com) has joined #beagle
  • [16:51:55] <Nedlinpopo> just do ohms law
  • [16:51:58] <Nedlinpopo> and watts law
  • [16:52:05] <Nedlinpopo> I*I*R
  • [16:52:18] <Nedlinpopo> and add 20% for safety
  • [16:54:38] * c10ud (~c10ud@emesene/dictator/c10ud) Quit (Remote host closed the connection)
  • [16:54:45] <corrosion> is Gerald from the google group here?
  • [16:55:01] * dury (~dugr16ott@164.Red-83-33-106.dynamicIP.rima-tde.net) Quit (Quit: Leaving)
  • [16:57:17] * konradoo77 (~debian@user-31-174-251-185.play-internet.pl) Quit (Ping timeout: 272 seconds)
  • [16:58:09] * malcom2073 (~quassel@unaffiliated/malcom2073) Quit (Quit: No Ping reply in 180 seconds.)
  • [16:58:26] * malcom2073 (~quassel@unaffiliated/malcom2073) has joined #beagle
  • [16:59:16] * viv (~vivek@183.83.119.16) has joined #beagle
  • [16:59:18] * karl-s (~karl.s@pool-173-51-92-61.lsanca.fios.verizon.net) Quit (Ping timeout: 245 seconds)
  • [17:00:47] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) has joined #beagle
  • [17:01:21] * ogra_ (~ogra_@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  • [17:03:55] * konradoo77 (~debian@user-94-254-147-183.play-internet.pl) has joined #beagle
  • [17:04:12] * bkearns (~bkearns@216-75-239-130.static.wiline.com) Quit (Quit: Leaving.)
  • [17:05:32] <Nedlinpopo> okay, off to the races. thanks for the info
  • [17:05:44] * kuldeepdhaka (~kuldeepdh@117.254.218.120) has joined #beagle
  • [17:05:47] * kaliatech (~kaliatech@c-71-58-91-18.hsd1.pa.comcast.net) Quit (Ping timeout: 272 seconds)
  • [17:07:10] * viv (~vivek@183.83.119.16) Quit (Ping timeout: 246 seconds)
  • [17:08:55] * bearsh|work (~quassel@189-92.77-83.cust.bluewin.ch) Quit (Ping timeout: 246 seconds)
  • [17:09:39] * Nedlinpopo (~james@dsl092-043-139.lax1.dsl.speakeasy.net) Quit (Ping timeout: 240 seconds)
  • [17:11:06] * bpetersen (46590045@gateway/web/freenode/ip.70.89.0.69) Quit (Quit: Page closed)
  • [17:11:07] * paolo_ (4e987c9f@gateway/web/freenode/ip.78.152.124.159) has joined #beagle
  • [17:11:08] <paolo_> hi
  • [17:11:09] * mythos (~mythos@unaffiliated/mythos) has joined #beagle
  • [17:11:45] <paolo_> the BeagleBone Black boot up when i insert a power supplay?
  • [17:12:22] <paolo_> or i can push power botton?
  • [17:14:40] * pitsch (~pitsch@g229053142.adsl.alicedsl.de) has joined #beagle
  • [17:15:27] <paolo_> please answere
  • [17:15:40] * cndiv (~cndiv@wikimedia/cdeubner) has joined #beagle
  • [17:15:43] <paolo_> the BeagleBone Black boot up when i insert a power supplay? or i can push power botton?
  • [17:15:49] <carpman> paolo_: it will boot as soon as you connect power.
  • [17:15:59] <paolo_> ok tenk you!!!
  • [17:19:44] * etch (~etch@pool-71-184-94-122.bstnma.fios.verizon.net) Quit ()
  • [17:21:05] * rob_w (~bob@unaffiliated/rob-w/x-1112029) Quit (Quit: Ex-Chat)
  • [17:21:05] * jackmitchell (~Thunderbi@cbnluk-gw0.cambridgebroadband.com) Quit (Quit: jackmitchell)
  • [17:22:53] * capa66 (~capa66@unaffiliated/capa66) Quit (Ping timeout: 272 seconds)
  • [17:23:07] * paolo_ (4e987c9f@gateway/web/freenode/ip.78.152.124.159) Quit (Quit: Page closed)
  • [17:24:39] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [17:25:01] * daydreaming (758819d5@gateway/web/freenode/ip.117.136.25.213) has joined #beagle
  • [17:27:17] * bizulk (~sli@h67.cornut.fr) Quit (Quit: Leaving.)
  • [17:27:53] * madez (~madez@p57B2D529.dip0.t-ipconnect.de) has joined #beagle
  • [17:28:26] * daydreaming (758819d5@gateway/web/freenode/ip.117.136.25.213) Quit (Client Quit)
  • [17:30:50] * capa66 (~capa66@unaffiliated/capa66) Quit (Ping timeout: 245 seconds)
  • [17:31:18] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [17:37:53] * etch (~etch@pool-71-184-94-122.bstnma.fios.verizon.net) has joined #beagle
  • [17:37:54] * pitsch (~pitsch@g229053142.adsl.alicedsl.de) Quit (Read error: Connection reset by peer)
  • [17:39:24] * NulL`` (~bleh1@87.254.66.16) has joined #beagle
  • [17:39:43] * konradoo77 (~debian@user-94-254-147-183.play-internet.pl) Quit (Ping timeout: 245 seconds)
  • [17:40:10] * capa66 (~capa66@unaffiliated/capa66) Quit (Ping timeout: 265 seconds)
  • [17:40:39] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [17:44:05] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) has joined #beagle
  • [17:46:54] * zeroem (~dhamilton@nat-225.fw1.la.vclk.net) has joined #beagle
  • [17:48:53] * kuldeepdhaka (~kuldeepdh@117.254.218.120) Quit (Ping timeout: 245 seconds)
  • [17:49:14] * djlewis (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
  • [17:50:09] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Quit: Client exiting)
  • [17:51:22] * garyamort (~gmort@cpe-204-210-137-32.hvc.res.rr.com) has joined #beagle
  • [17:52:08] * etch (~etch@pool-71-184-94-122.bstnma.fios.verizon.net) Quit ()
  • [17:52:48] * capa66 (~capa66@unaffiliated/capa66) Quit (Ping timeout: 246 seconds)
  • [17:53:19] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [17:53:38] * ljenkins_ (~ljenkins@2001:1948:212::a) Quit (Ping timeout: 264 seconds)
  • [17:54:46] * ljenkins_ (~ljenkins@137.190.80.249) has joined #beagle
  • [17:55:40] * zeroem (~dhamilton@nat-225.fw1.la.vclk.net) Quit (Quit: Leaving.)
  • [17:55:57] * zeroem (~dhamilton@nat-225.fw1.la.vclk.net) has joined #beagle
  • [17:57:56] * bkearns (~bkearns@216-75-239-130.static.wiline.com) has joined #beagle
  • [17:57:59] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [17:58:05] * etch (~etch@pool-71-184-94-122.bstnma.fios.verizon.net) has joined #beagle
  • [17:58:26] * bkearns (~bkearns@216-75-239-130.static.wiline.com) has left #beagle
  • [17:59:08] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [17:59:08] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [18:04:29] * kuldeepdhaka (~kuldeepdh@117.254.218.26) has joined #beagle
  • [18:05:52] * R2E4 (~IceChat9@207.164.206.172) Quit (Read error: Connection reset by peer)
  • [18:06:28] * prp^2 (~prpplague@107-206-64-184.lightspeed.rcsntx.sbcglobal.net) Quit (Ping timeout: 264 seconds)
  • [18:07:07] * contempt (contempt@unaffiliated/contempt) Quit (Remote host closed the connection)
  • [18:07:34] * sh1v (~sh1v@confluxhost.com) Quit (Ping timeout: 252 seconds)
  • [18:07:34] * sh1v (~sh1v@confluxhost.com) has joined #beagle
  • [18:07:35] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [18:07:35] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [18:13:40] * honschu (~honschu@shackspace/j4fun) Quit (Read error: Operation timed out)
  • [18:14:00] * kiilo (~kiilo@77-56-99-130.dclient.hispeed.ch) Quit (Ping timeout: 240 seconds)
  • [18:14:40] * R2E4 (~IceChat9@207.164.206.172) has joined #beaglebone
  • [18:15:00] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [18:15:23] * rob_w (~rob@unaffiliated/rob-w/x-1112029) has joined #beagle
  • [18:16:13] * honschu (~honschu@shackspace/j4fun) has joined #beagle
  • [18:16:34] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [18:16:34] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [18:19:35] * awozniak (~awozniak@71-93-61-178.static.snlo.ca.charter.com) Quit (Quit: Ex-Chat)
  • [18:24:23] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [18:25:37] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [18:25:38] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [18:26:13] * karl-s (~karl.s@pool-173-51-92-61.lsanca.fios.verizon.net) has joined #beagle
  • [18:28:12] * madez (~madez@p57B2D529.dip0.t-ipconnect.de) Quit (Remote host closed the connection)
  • [18:31:40] * vinifr (~vini@177.98.171.220) has joined #beagle
  • [18:31:45] * mn_ (7aa9dbc3@gateway/web/freenode/ip.122.169.219.195) has joined #beagle
  • [18:31:52] <mn_> hi
  • [18:32:34] * cjoe (~customerj@fibhost-66-7-177.fibernet.hu) Quit (Ping timeout: 246 seconds)
  • [18:33:21] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 240 seconds)
  • [18:34:44] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [18:34:44] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [18:35:02] * zkxs (~zkxs@129.244.128.133) Quit (Remote host closed the connection)
  • [18:35:12] * SyNko (~SyNko@78-134-88-11.v4.ngi.it) has joined #beagle
  • [18:36:15] * madez (~madez@p57B2D529.dip0.t-ipconnect.de) has joined #beagle
  • [18:37:48] * thews (~thews@209.65.135.146) Quit (Remote host closed the connection)
  • [18:41:11] * Nedlinpopo (~james@12.0.85.3) has joined #beagle
  • [18:42:41] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 240 seconds)
  • [18:43:01] * Nedlinpopo (~james@12.0.85.3) Quit (Client Quit)
  • [18:43:20] * Nedlinpopo (~james@12.0.85.3) has joined #beagle
  • [18:43:48] <mn_> im unable boot from sd card
  • [18:43:58] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [18:43:58] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [18:44:04] <mn_> can anybody help me out
  • [18:44:27] <mn_> im new to embedded linux
  • [18:45:00] <mn_> i ve downloaded u boot source code and compiled it..
  • [18:45:03] * cjoe (~customerj@fibhost-66-7-177.fibernet.hu) has joined #beaglebone
  • [18:45:04] * cjoe (~customerj@fibhost-66-7-177.fibernet.hu) has joined #beagleboard
  • [18:45:07] * cjoe (~customerj@fibhost-66-7-177.fibernet.hu) has joined #beagle
  • [18:45:17] <mn_> i got MLO N UBOOT IMAGE FILES
  • [18:46:15] <mn_> i've kept these in sd card and tried to boot from it.. but its not working..
  • [18:46:22] <mn_> plz help me out..
  • [18:46:38] * asfagadgsh (~corrosion@pool-71-184-94-122.bstnma.fios.verizon.net) has joined #beagle
  • [18:46:57] <_av500_> what board?
  • [18:47:10] <_av500_> on BBB, you need to hold the boot button while powerin up
  • [18:47:29] <_av500_> also, get a serial cable
  • [18:47:29] * etch (~etch@pool-71-184-94-122.bstnma.fios.verizon.net) Quit (Ping timeout: 252 seconds)
  • [18:47:30] * corrosion (~corrosion@pool-71-184-94-122.bstnma.fios.verizon.net) Quit (Ping timeout: 272 seconds)
  • [18:47:39] * etch (~etch@pool-71-184-94-122.bstnma.fios.verizon.net) has joined #beagle
  • [18:47:54] <mn_> im using bbb.. im doing the same..ive everything with me..
  • [18:48:06] <mn_> i'll paste the logs here..
  • [18:48:10] <mn_> plz wait..
  • [18:48:49] <thurgood> use pastebin please
  • [18:49:15] <mn_> mmc0 is current device micro SD card found mmc0 is current device gpio: pin 54 (gpio 54) value is 1 SD/MMC found on device 0 reading uEnv.txt ** Unable to read file uEnv.txt ** gpio: pin 55 (gpio 55) value is 1 ** Invalid partition 2 ** U-Boot# U-Boot SPL 2013.04-dirty (Jun 19 2013 - 09:57:14) musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 mus
  • [18:49:27] <mn_> these are the logs
  • [18:49:42] <_av500_> pastebin please
  • [18:50:04] <thurgood> invalid partition 2... where is your rootfs?
  • [18:50:21] <mn_> i dont want to boot linux
  • [18:50:30] <mn_> i want to boot only uboot
  • [18:50:43] <mn_> which i have compiled
  • [18:51:31] <mn_> i want the 1st bootloader to detect sd card and boot MLO and uboot.img from ext sd card
  • [18:51:40] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [18:51:53] * corrosion (~corrosion@pool-71-184-94-122.bstnma.fios.verizon.net) has joined #beagle
  • [18:52:16] <_av500_> pastebin please
  • [18:52:46] <vinifr> you already did get :)
  • [18:52:57] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [18:52:57] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [18:52:59] <mn_> what is pastebin
  • [18:53:05] <mn_> i didnt get you
  • [18:53:49] * asfagadgsh (~corrosion@pool-71-184-94-122.bstnma.fios.verizon.net) Quit (Ping timeout: 272 seconds)
  • [18:54:04] <vinifr> http://pastebin.com/
  • [18:54:41] * kaliatech (~kaliatech@c-71-58-91-18.hsd1.pa.comcast.net) has joined #beagle
  • [18:54:41] * thurgood (~thurgood@64.132.24.36) Quit (Read error: Connection reset by peer)
  • [18:55:05] * thurgood (~thurgood@64.132.24.36) has joined #beagle
  • [18:55:43] <mn_> http://pastebin.com/gvJAchWF
  • [18:56:14] <mn_> could you check there please
  • [18:56:22] * madez (~madez@p57B2D529.dip0.t-ipconnect.de) Quit (Ping timeout: 246 seconds)
  • [18:56:54] <thurgood> that's uboot trying to hand off to the rootfs
  • [18:57:05] <mn_> yeah...
  • [18:57:18] <mn_> but it is not from my sd card
  • [18:57:31] <mn_> it is executing from emmc card
  • [18:57:36] <thurgood> probably from the emmc
  • [18:58:08] <mn_> yes but.. I am trying to boot u boot from my sd card
  • [18:58:19] <mn_> where I have some changes to u boot
  • [18:58:21] <thurgood> you should be able to hold the boot button while applying power
  • [18:58:23] * madez (~madez@p57B2D529.dip0.t-ipconnect.de) has joined #beagle
  • [18:58:49] <thurgood> to change the boot order
  • [18:58:59] <mn_> yes.... i am holding it for a long time but there is not response
  • [18:59:12] <mn_> no led is blinking
  • [18:59:39] <mn_> as long as i press the boot button
  • [19:00:39] <vinifr> mn_, you booted from SD card, not emmc. "MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1"
  • [19:00:42] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 240 seconds)
  • [19:00:56] * zkxs (~zkxs@129.244.128.133) has joined #beagle
  • [19:01:34] <mn_> I didnot get you vinifr
  • [19:01:40] <mn_> how to confirm that
  • [19:02:07] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [19:02:07] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [19:04:19] <vinifr> "MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1" and "micro SD card found" and "mmc0 is current device"
  • [19:04:36] * sam___ (6f77e3d9@gateway/web/freenode/ip.111.119.227.217) has joined #beagle
  • [19:04:48] <vinifr> eMMC is a nand memory
  • [19:05:13] <vinifr> "NAND: No NAND device found!!!"
  • [19:05:35] <mn_> the uboot from emmc is detecting the sd card
  • [19:05:38] <sam___> can we use BF-810 (GND,Rx,TX pins) as serial debug wire for Beaglebone Black ?
  • [19:05:52] <mn_> I hope this is happening
  • [19:06:13] <thurgood> check the date of uboot...
  • [19:08:12] <mn_> it is june 19 2013
  • [19:08:17] <mn_> not my build date
  • [19:08:24] <mn_> I have built just now
  • [19:10:04] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 264 seconds)
  • [19:10:44] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [19:10:44] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [19:10:59] <vinifr> If you remove the sd, is the log the same?
  • [19:11:07] <mn_> yes
  • [19:11:12] <mn_> the same log
  • [19:11:20] <vinifr> :o
  • [19:11:43] <mn_> expect sd card detection
  • [19:11:44] <sam___> can we use Bafo BF-810 (GND,Rx,TX pins) as serial debug wire for Beaglebone Black ?
  • [19:11:45] <mn_> :)
  • [19:12:17] <mn_> @sam_s you can use
  • [19:13:20] * NulL` (~bleh1@87.254.66.16) has joined #beagle
  • [19:13:39] <sam___> But can this damage 3.3v pins ?
  • [19:13:56] <vinifr> mn_, how do you write uboot-image for SD?
  • [19:15:21] * NulL`` (~bleh1@87.254.66.16) Quit (Ping timeout: 272 seconds)
  • [19:15:35] <mn_> first im formating the sd card in FAT32. then im copying the MLO and u-boot Image files inti it..
  • [19:15:58] <thurgood> also did you set the partition to bootable?
  • [19:16:23] <mn_> ]and connecting to the board and holding the boot button gave the power.
  • [19:16:31] <vinifr> do you use 'cp' or 'dd'?
  • [19:16:39] <mn_> cp
  • [19:16:55] <mn_> im doing it in windows..
  • [19:17:32] <vinifr> so really does not work :)
  • [19:18:14] <mn_> what am i supposed to do now.. plz help me out..
  • [19:18:15] * LordDVG (~LordDVG@unaffiliated/lorddvg) Quit (Remote host closed the connection)
  • [19:18:19] <thurgood> you can do the boot partition in windows fine, although in general I'd suggest having a linux box for dev work with the bbb
  • [19:18:33] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 246 seconds)
  • [19:18:37] <thurgood> did you set the partition to bootable?
  • [19:18:51] <mn_> i've linux in my laptop..
  • [19:19:02] <mn_> how to do that..?
  • [19:19:50] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [19:19:50] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [19:20:03] <sam___> is Bafo BF-810 is compatible for Beaglebone Black serial debug pins ?Are you sure they don't destroy GND,Tx,RX pin On Beaglebone Black ?
  • [19:20:04] <mn_> im new to use this board..
  • [19:20:52] <thurgood> not entirely sure on windows but you should be able to do it through the disk management panel
  • [19:21:17] <vinifr> mn_, there is a site, but in portuguese: http://sergioprado.org/desenvolver-sistema-linux-zero-beaglebone-black/
  • [19:21:26] <thurgood> it may use the term active rather than bootable
  • [19:24:06] * sam___ (6f77e3d9@gateway/web/freenode/ip.111.119.227.217) Quit (Quit: Page closed)
  • [19:27:33] <mn_> i didnt get it completely
  • [19:27:46] <mn_> Can you tell now pls
  • [19:28:05] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 248 seconds)
  • [19:28:25] * IamTrying (~IamTrying@82.143.92.22) Quit (Quit: Leaving)
  • [19:29:32] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [19:29:32] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [19:32:51] <mn_> vinifr ??
  • [19:33:30] <vinifr> Can Google Translate help you?
  • [19:34:42] <vinifr> i can translate, but take a while :o
  • [19:35:13] <mn_> Can I do in any other way like in linux
  • [19:35:25] <mn_> Can I do dd
  • [19:35:31] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [19:35:32] <mn_> to these files
  • [19:35:51] <mn_> mailny I dont want linux to boot as of now
  • [19:36:00] * sam____ (6f77e3d9@gateway/web/freenode/ip.111.119.227.217) has joined #beagle
  • [19:36:18] <sam____> is Bafo BF-810 is compatible for Beaglebone Black serial debug pins ?Are you sure they don't destroy GND,Tx,RX pin On Beaglebone Black ?
  • [19:36:45] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [19:36:45] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [19:37:35] <mn_> @sam__ yes
  • [19:37:47] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) Quit (Ping timeout: 272 seconds)
  • [19:37:56] <sam____> Thank You !!
  • [19:38:35] <vinifr> i think you can use 'dd'
  • [19:38:43] <thurgood> mn, in linux just use fdisk to set the paritition active/bootable
  • [19:39:29] * orbarron (~orbarron@nat/ti/x-nsoussxjbitmvlbo) Quit (Remote host closed the connection)
  • [19:39:31] <mn_> in bootable partition if i write the MLO and uboot.img
  • [19:39:42] <mn_> will it boot from sd
  • [19:39:46] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) has joined #beagle
  • [19:39:55] * orbarron (~orbarron@nat/ti/x-ebhqedhrwexkhbkf) has joined #beaglebone
  • [19:40:59] <thurgood> it should
  • [19:41:12] <vinifr> mn_, http://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-Bootloader:U-Boot
  • [19:41:20] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit (Remote host closed the connection)
  • [19:41:49] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) has joined #beagle
  • [19:42:03] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 240 seconds)
  • [19:42:35] <vinifr> http://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-SetupmicroSD/SDcard
  • [19:43:38] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [19:43:38] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [19:44:16] <mn_> vinifr I dont know why he is using dd
  • [19:44:34] <mn_> it is only making 0 of 1MB memory
  • [19:45:17] * TooLmaN (~TooLmaN@mail.thomsonplastics.com) Quit (Quit: Off to save the world!)
  • [19:46:04] <vinifr> erase SD memory
  • [19:46:13] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit (Ping timeout: 248 seconds)
  • [19:46:49] * sam____ (6f77e3d9@gateway/web/freenode/ip.111.119.227.217) Quit (Ping timeout: 250 seconds)
  • [19:47:51] <vinifr> you must follow step by step
  • [19:48:31] <vinifr> mn_, Setup microSD/SD card, Install Bootloader, uEnv.txt based bootscript
  • [19:49:43] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [19:51:04] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [19:51:04] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [19:52:05] <mn_> is uEnv.txt is necesary
  • [19:52:06] <mn_> ??
  • [19:52:24] <mn_> I want to stop after the U boot propt only
  • [19:52:27] * lyakh (~lyakh@dslb-088-076-022-046.pools.arcor-ip.net) Quit (Quit: thanks, bye)
  • [19:53:40] <mn_> vinifr what is this http://pastebin.com/t2xXTb4i
  • [19:53:45] <mn_> how to do that
  • [19:54:47] <vinifr> it create 2 partitions
  • [19:56:19] * chaincrusher (~zzzzzzzzz@68.15.179.90) has joined #beaglebone
  • [19:56:53] <vinifr> try type the whole command
  • [19:58:21] <vinifr> EOF split the command in lines
  • [19:58:45] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [19:59:28] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) has joined #beagle
  • [20:00:08] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [20:00:08] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [20:00:21] <vinifr> for my particular board I use: (Format) http://rhombus-tech.net/allwinner_a10/a10_mmc_boot/
  • [20:00:59] <mn_> ok
  • [20:01:17] <mn_> I have created the two partitons
  • [20:01:22] * Emi (~Emi@cpe-76-176-71-218.san.res.rr.com) has joined #beagle
  • [20:01:45] <mn_> and i have copied the MLO and uboot.img to the /dev/sdb1 partion
  • [20:02:15] <mn_> do i need to create any boot directory in the /dev/sdb1
  • [20:02:16] <mn_> ??
  • [20:02:59] <vinifr> i think that is enough
  • [20:03:02] <thurgood> nope,
  • [20:03:15] <mn_> ok i will check it on the board once
  • [20:06:13] * chaincrusher1 (~sherman@68.15.179.90) has joined #beaglebone
  • [20:06:43] <mn_> no....
  • [20:06:56] * chaincrusher1 (~sherman@68.15.179.90) has left #beaglebone
  • [20:07:12] <mn_> nothng is happening on the board
  • [20:07:24] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) Quit (Ping timeout: 240 seconds)
  • [20:07:57] <vinifr> mn_, "uEnv.txt based bootscript"
  • [20:08:04] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 240 seconds)
  • [20:08:30] <chaincrusher> can't connect to my bbb over ssh "ssh_exchange_identification: read: Connection reset by peer"
  • [20:08:51] <mn_> what is it compulsary to load the uboot from sd card
  • [20:09:04] <mn_> when i press the boot button CCCCCCCCCCCCCCCCCCCCCCCCCCCC
  • [20:09:22] <mn_> this format is prining in tera term
  • [20:09:25] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [20:09:25] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [20:09:36] <chaincrusher> I can connect to the starter page, change the LED lights etc
  • [20:09:43] * f-zombie (fzombie@pdpc/supporter/student/GPLGeek) has joined #beagle
  • [20:09:44] <chaincrusher> ping the ip
  • [20:09:58] <vinifr> mn_, sorry, uEnv.tx is only for load linux
  • [20:10:08] <mn_> yes
  • [20:10:08] <mn_> hmm
  • [20:10:26] <chaincrusher> I have the feeling dropbear isn't up or is misconfigured
  • [20:10:32] <vinifr> nothing? log?
  • [20:10:43] <mn_> no log
  • [20:10:52] <mn_> only CCCCCC are priniting
  • [20:11:12] <vinifr> how did you compile images?
  • [20:11:51] <vinifr> "make ARCH=arm CROSS_COMPILE=${CC} am335x_evm_config"?
  • [20:12:04] <mn_> make ARCH=arm CROSS_COMPILE=/myspace/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-
  • [20:12:07] <mn_> yes
  • [20:12:10] <mn_> i did that
  • [20:12:37] <mn_> after that i have given the above command
  • [20:13:56] <mn_> is the first stage bootlade able to detect sd card and load the MLO??
  • [20:14:05] <vinifr> strange! unfortunately I do not have a bbb
  • [20:14:53] <thurgood> should be able to do that as it does for other boards like the xM
  • [20:15:06] <mn_> hmm
  • [20:15:36] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [20:16:09] <mn_> If I overwrite the emmc with my uboot from sd card
  • [20:16:25] <mn_> I can boot my own image na
  • [20:16:28] <mn_> ??
  • [20:17:24] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 240 seconds)
  • [20:18:05] * spm_Draget (~quassel@ip-178-202-251-59.unitymediagroup.de) Quit (Remote host closed the connection)
  • [20:18:06] <vinifr> bbb is strange, because i use 'dd', not 'cp' in order to install uboot
  • [20:18:18] <vinifr> in my board
  • [20:18:33] <thurgood> yeah, but it sounds like you don't want to do that
  • [20:18:36] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [20:18:37] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [20:18:42] * capa66 (~capa66@unaffiliated/capa66) Quit (Ping timeout: 272 seconds)
  • [20:18:52] <mn_> in dd how many files you have given
  • [20:18:58] <vinifr> "dd if=spl/sunxi-spl.bin of=/dev/sdX bs=1024 seek=8"
  • [20:19:09] <vinifr> "dd if=u-boot.bin of=/dev/sdX bs=1024 seek=32"
  • [20:19:22] <vinifr> my board is cubieboard
  • [20:19:23] <thurgood> the evm board is not the same as the bbb as far as I know... could be wrong there for the sake of MLO
  • [20:19:49] * Vostok_ is now known as Vostok
  • [20:20:08] <vinifr> yes, they are differents
  • [20:20:47] <vinifr> both are arm, but still differents
  • [20:21:08] <mn_> how to overwrite emmc image
  • [20:21:09] <thurgood> same CPU line, but different boards
  • [20:21:49] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [20:21:52] <mn_> i want to overwrite MLO and Uboot.img images in the emmc
  • [20:22:01] <thurgood> it'd be like flashing a bios for one mobo onto a different mobo and hoping it works because they boath support the same CPU
  • [20:23:03] <mn_> how to this any idea
  • [20:26:40] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 246 seconds)
  • [20:27:11] * dgilmore (~dgilmore@fedora/dgilmore) Quit (Ping timeout: 272 seconds)
  • [20:27:43] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [20:27:43] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [20:29:38] <honestly> augh, which package is ptrace in in ubuntu?
  • [20:31:13] * Jinx (~Jinx@unaffiliated/jinx) has joined #beagle
  • [20:31:56] <thurgood> try the command at the console, it will probably tell you the package if it's not already installed
  • [20:32:43] <honestly> nope
  • [20:32:51] <thurgood> hmm
  • [20:33:30] <mn_> why my uboot.img is PPCimage
  • [20:33:33] <thurgood> python ptrace?
  • [20:33:37] <thurgood> python-ptrace?
  • [20:33:40] <honestly> no.
  • [20:34:00] <honestly> oh nvm
  • [20:34:03] <honestly> ptrace is a system call
  • [20:34:09] <mn_> [root@vijay mnt]# file u-boot.img u-boot.img: PPCBoot image
  • [20:34:26] <honestly> I dun goofed
  • [20:34:32] * vvu|Log_away is now known as vvu|Log
  • [20:34:42] * vvu|Log is now known as vvu|Log_away
  • [20:35:23] <thurgood> ah...
  • [20:36:09] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [20:36:26] * _chase_ (~a0271661@nat/ti/x-pponzkkexcgutsqh) Quit (Ping timeout: 272 seconds)
  • [20:36:35] * SilicaGel (~quassel@leavenworth78.main.ad.rit.edu) Quit (Read error: Operation timed out)
  • [20:36:58] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [20:36:58] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [20:38:25] * CanyonMan (~quassel@leavenworth78.main.ad.rit.edu) has joined #beagle
  • [20:38:26] * CanyonMan (~quassel@leavenworth78.main.ad.rit.edu) Quit (Remote host closed the connection)
  • [20:40:36] * nohearth2 (40772f3a@gateway/web/freenode/ip.64.119.47.58) has joined #beagle
  • [20:41:08] <nohearth2> dose any know the ubuntu 13.10 root password i try useing ubuntu ubuntu but it did not work.
  • [20:43:33] * nohearth2 (40772f3a@gateway/web/freenode/ip.64.119.47.58) Quit (Client Quit)
  • [20:44:02] * nohearth2 (40772f3a@gateway/web/freenode/ip.64.119.47.58) has joined #beagle
  • [20:45:16] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 265 seconds)
  • [20:46:09] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [20:46:09] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [20:46:44] <nohearth2> ow can one link one or more BBB together ?
  • [20:47:15] <nohearth2> how *
  • [20:47:57] * uv (~uv@94-21-51-144.pool.digikabel.hu) has joined #beagle
  • [20:48:15] <agmlego> Ethernet? SPI? I2C? RS232? USB? GPIB on the GPIO lines?
  • [20:52:27] <nohearth2> ah ok thank you :) one last think thou i have a BBB with ubuntu 12.04.3 i log as ubuntu ubuntu but i just get the command line windowed how get to the normal ubuntu 12.04 desktop ?
  • [20:52:37] * madez (~madez@p57B2D529.dip0.t-ipconnect.de) Quit (Ping timeout: 272 seconds)
  • [20:53:57] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 248 seconds)
  • [20:54:03] * madez (~madez@p57B2DC09.dip0.t-ipconnect.de) has joined #beagle
  • [20:55:14] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [20:55:14] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [20:56:28] <nohearth2> any one :O
  • [20:58:22] * mark4 (~mark4@cpe-192-136-220-10.tx.res.rr.com) has joined #beagle
  • [20:58:23] * gustavoz (~gustavoz@host36.190-225-101.telecom.net.ar) Quit (Ping timeout: 252 seconds)
  • [20:59:22] <nohearth2> is any one running ubuntu are there BBB ?
  • [20:59:25] <etch> nohearth2 I believe the default user is ubuntu and pass is temppwd. If you want a root user password, you can set one with sudo passwd
  • [21:00:48] <chaincrusher> updating angstrom fixed it
  • [21:02:09] * kilnaar (~kilnaar@gateway.dvdempire.com) Quit (Quit: Leaving)
  • [21:03:02] <nohearth2> allright i try temppwd will it take just to the command line windowed or the environment
  • [21:03:28] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 264 seconds)
  • [21:04:01] <etch> nohearth2 never used a BBB with a monitor so I'm not sure. Always used the prompt
  • [21:04:22] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [21:04:22] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [21:04:33] <nohearth2> ah ok thank you etch
  • [21:04:54] <nohearth2> can the BBB run Xbmc or no ?
  • [21:05:52] <nohearth2> i got to go guy but thank you for the help :D
  • [21:06:03] <etch> i see no reason why it can't. UI won't be as snappy as a PC
  • [21:06:05] * nohearth2 (40772f3a@gateway/web/freenode/ip.64.119.47.58) Quit (Quit: Page closed)
  • [21:06:05] <etch> np
  • [21:09:02] * tomD (bcbfcd4f@gateway/web/freenode/ip.188.191.205.79) has joined #beagle
  • [21:10:33] * mn_ (7aa9dbc3@gateway/web/freenode/ip.122.169.219.195) Quit (Quit: Page closed)
  • [21:11:05] * jkridner (~jkridner@pdpc/supporter/active/jkridner) Quit (Remote host closed the connection)
  • [21:11:23] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [21:11:43] * spm_Draget (~quassel@ip-178-202-251-59.unitymediagroup.de) has joined #beagle
  • [21:12:46] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [21:12:46] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [21:13:06] * kilnaar (~kilnaar@172.56.11.6) has joined #beagle
  • [21:13:55] * tomD (bcbfcd4f@gateway/web/freenode/ip.188.191.205.79) Quit (Ping timeout: 250 seconds)
  • [21:18:56] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit ()
  • [21:18:57] * Ceriand (~ceriand@unaffiliated/ceriand) Quit (Ping timeout: 246 seconds)
  • [21:19:43] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [21:20:48] * eggzeck (~eggzeck@c-71-199-220-139.hsd1.fl.comcast.net) has joined #beagle
  • [21:21:15] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [21:21:15] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [21:28:45] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [21:29:04] * Tenkawa (~Tenkawa@99.17.242.8) has joined #beagle
  • [21:29:04] * Tenkawa (~Tenkawa@99.17.242.8) Quit (Changing host)
  • [21:29:04] * Tenkawa (~Tenkawa@unaffiliated/tenkawa) has joined #beagle
  • [21:30:13] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [21:30:13] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [21:31:41] * vagrantc (~vagrant@freegeek/vagrantc) Quit (Quit: leaving)
  • [21:33:07] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) Quit (Ping timeout: 265 seconds)
  • [21:34:04] * avRoogh3 (~julian@91-64-73-247-dynip.superkabel.de) Quit (Ping timeout: 264 seconds)
  • [21:38:07] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [21:38:30] * cndiv (~cndiv@wikimedia/cdeubner) Quit (Ping timeout: 272 seconds)
  • [21:39:05] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [21:39:06] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [21:39:19] * djlewis (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Quit: Leaving.)
  • [21:43:20] * flo_lap (~fuchs@sign-4db6bb99.pool.mediaWays.net) has joined #beagle
  • [21:43:20] * flo_lap (~fuchs@sign-4db6bb99.pool.mediaWays.net) Quit (Changing host)
  • [21:43:20] * flo_lap (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [21:43:49] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Ping timeout: 272 seconds)
  • [21:44:41] * flo_lap is now known as florian
  • [21:46:29] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 246 seconds)
  • [21:46:53] * BobCat (~bobcat@ool-44c35b0f.dyn.optonline.net) has joined #beagle
  • [21:46:54] * Ceriand (~ceriand@unaffiliated/ceriand) has joined #beagle
  • [21:47:04] * mrpackethead (~mrpacketh@216.9.110.9) has joined #beagle
  • [21:48:00] * NulL` (~bleh1@87.254.66.16) Quit (Ping timeout: 272 seconds)
  • [21:48:07] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [21:48:07] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [21:48:34] * Shadyman (~matthew@135.23.117.98) has joined #beagle
  • [21:48:40] * Shadyman (~matthew@135.23.117.98) Quit (Changing host)
  • [21:48:40] * Shadyman (~matthew@unaffiliated/shadyman) has joined #beagle
  • [21:50:27] * kilnaar (~kilnaar@172.56.11.6) Quit (Quit: kilnaar)
  • [21:56:35] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [21:57:17] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [21:57:17] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [22:01:24] * prpplague (~danders@rrcs-97-77-26-26.sw.biz.rr.com) Quit (Quit: Leaving)
  • [22:02:21] * capa66 (~capa66@unaffiliated/capa66) Quit (Ping timeout: 246 seconds)
  • [22:04:43] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [22:05:38] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [22:05:38] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [22:05:52] * avRoogh3 (~julian@91-65-128-71-dynip.superkabel.de) has joined #beaglebone
  • [22:06:23] * NishanthMenon (~nmenon@nat/ti/x-jiwcwnpdokgujpzs) Quit (Quit: Deeply attached to friends and acquaintances.)
  • [22:07:07] * kiwichris (~textual@203-206-130-106.perm.iinet.net.au) has joined #beagle
  • [22:07:37] * jmoyerman (~josh@68.202.202.139) Quit (Ping timeout: 272 seconds)
  • [22:11:22] * vagrantc (~vagrant@freegeek/vagrantc) has joined #beagle
  • [22:13:35] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [22:14:33] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [22:14:33] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [22:14:49] * jmoyerman (~josh@68.202.202.139) has joined #beagle
  • [22:19:09] * cipolla (~scaloroma@93-32-119-195.ip33.fastwebnet.it) has joined #beagle
  • [22:19:52] * cipolla (~scaloroma@93-32-119-195.ip33.fastwebnet.it) Quit (Read error: Connection reset by peer)
  • [22:20:41] * uv (~uv@94-21-51-144.pool.digikabel.hu) Quit (Read error: Connection reset by peer)
  • [22:22:11] * mrpackethead (~mrpacketh@216.9.110.9) Quit (Ping timeout: 272 seconds)
  • [22:22:25] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 265 seconds)
  • [22:23:35] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [22:23:35] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [22:23:42] * kiwichris (~textual@203-206-130-106.perm.iinet.net.au) Quit (Quit: My MacBook Pro has gone to sleep. ZZZzzz???)
  • [22:28:13] * cndiv (~cndiv@wikimedia/cdeubner) has joined #beagle
  • [22:28:54] * capa66 (~capa66@195.99.240.72) has joined #beagle
  • [22:28:54] * capa66 (~capa66@195.99.240.72) Quit (Changing host)
  • [22:28:54] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [22:29:49] * kiwichris (~textual@203-206-130-106.perm.iinet.net.au) has joined #beagle
  • [22:30:50] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [22:32:08] * kiwichris (~textual@203-206-130-106.perm.iinet.net.au) Quit (Client Quit)
  • [22:32:28] * mrjazzcat (~mrjazzcat@c-24-8-176-66.hsd1.co.comcast.net) has joined #beagle
  • [22:32:29] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [22:32:30] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [22:34:56] * kiwichris (~textual@203-206-130-106.perm.iinet.net.au) has joined #beagle
  • [22:39:13] * konradoo77 (~debian@user-94-254-196-73.play-internet.pl) has joined #beagle
  • [22:39:22] * kiwichris (~textual@203-206-130-106.perm.iinet.net.au) Quit (Client Quit)
  • [22:40:01] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 246 seconds)
  • [22:40:38] * f-zombie (fzombie@pdpc/supporter/student/GPLGeek) Quit (Ping timeout: 240 seconds)
  • [22:40:57] * capa66 (~capa66@unaffiliated/capa66) Quit (Remote host closed the connection)
  • [22:41:04] * kilnaar (~kilnaar@c-98-236-141-239.hsd1.pa.comcast.net) has joined #beagle
  • [22:41:19] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [22:41:20] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [22:41:35] * kiwichris (~textual@203-206-130-106.perm.iinet.net.au) has joined #beagle
  • [22:41:51] * capa66 (~capa66@unaffiliated/capa66) has joined #beagle
  • [22:44:12] * kiwichris (~textual@203-206-130-106.perm.iinet.net.au) Quit (Client Quit)
  • [22:44:38] * thurgood (~thurgood@64.132.24.36) Quit (Remote host closed the connection)
  • [22:45:04] * thurgood (~thurgood@64.132.24.36) has joined #beagle
  • [22:48:04] * dwery (~dwery@nslu2-linux/dwery) Quit (Ping timeout: 246 seconds)
  • [22:49:03] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [22:49:15] * thurgood (~thurgood@64.132.24.36) Quit (Ping timeout: 246 seconds)
  • [22:49:22] * jvalleroy (~jvalleroy@c-68-62-95-185.hsd1.mi.comcast.net) has joined #beagle
  • [22:49:22] * jvalleroy (~jvalleroy@c-68-62-95-185.hsd1.mi.comcast.net) has joined #beaglebone
  • [22:49:46] * janne (~janne@sianko.jannau.net) Quit (Ping timeout: 245 seconds)
  • [22:50:07] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [22:50:07] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [22:53:34] * Tenkawa (~Tenkawa@unaffiliated/tenkawa) Quit (Quit: cheers)
  • [22:55:48] * janne (~janne@sianko.jannau.net) has joined #beagle
  • [22:57:23] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [22:58:32] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [22:58:33] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [22:59:09] * jmoyerman (~josh@68.202.202.139) Quit (Ping timeout: 240 seconds)
  • [22:59:35] * georgem_home (~max@cpe-69-76-171-38.kc.res.rr.com) has joined #beagle
  • [22:59:45] * rob_w (~rob@unaffiliated/rob-w/x-1112029) Quit (Quit: Leaving)
  • [22:59:58] * avRoogh3 (~julian@91-65-128-71-dynip.superkabel.de) Quit (Ping timeout: 246 seconds)
  • [23:00:25] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) has joined #beagle
  • [23:01:00] * jmoyerman (~josh@68.202.202.139) has joined #beagle
  • [23:01:02] * bfederau (~quassel@service.basyskom.com) Quit (Remote host closed the connection)
  • [23:01:18] * bfederau (~quassel@service.basyskom.com) has joined #beagle
  • [23:04:10] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [23:05:16] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [23:05:16] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [23:05:50] * kaliatech (~kaliatech@c-71-58-91-18.hsd1.pa.comcast.net) Quit (Quit: Leaving)
  • [23:08:24] * thurgood (~thurgood@cpe-70-113-204-247.austin.res.rr.com) has joined #beagle
  • [23:13:29] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 272 seconds)
  • [23:14:00] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [23:14:00] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [23:15:54] * nighty^ (~nighty@lns-bzn-49f-62-147-170-46.adsl.proxad.net) has joined #beagle
  • [23:15:54] * nighty^ (~nighty@lns-bzn-49f-62-147-170-46.adsl.proxad.net) has joined #beagleboard
  • [23:18:06] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) has joined #beagle
  • [23:18:29] * cndiv (~cndiv@wikimedia/cdeubner) Quit (Ping timeout: 240 seconds)
  • [23:20:14] * kuldeepdhaka_ (~kuldeepdh@117.254.221.200) has joined #beagle
  • [23:20:33] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [23:20:58] * kuldeepdhaka (~kuldeepdh@117.254.218.26) Quit (Ping timeout: 245 seconds)
  • [23:22:06] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [23:22:06] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [23:26:44] * kiwichris (~textual@203-206-130-106.perm.iinet.net.au) has joined #beagle
  • [23:28:53] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 245 seconds)
  • [23:29:22] * konradoo77 (~debian@user-94-254-196-73.play-internet.pl) Quit (Ping timeout: 246 seconds)
  • [23:30:14] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [23:30:15] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [23:31:08] * konradoo77 (~debian@user-94-254-194-204.play-internet.pl) has joined #beagle
  • [23:33:03] * kuldeepdhaka_ (~kuldeepdh@117.254.221.200) Quit (Ping timeout: 245 seconds)
  • [23:34:09] * etch (~etch@pool-71-184-94-122.bstnma.fios.verizon.net) Quit ()
  • [23:37:31] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 252 seconds)
  • [23:38:08] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) Quit (Remote host closed the connection)
  • [23:38:53] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [23:38:54] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [23:40:49] * vinifr (~vini@177.98.171.220) Quit (Quit: Saindo)
  • [23:45:14] * cndiv (~cndiv@wikimedia/cdeubner) has joined #beagle
  • [23:45:25] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) Quit (Ping timeout: 272 seconds)
  • [23:46:31] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 265 seconds)
  • [23:46:51] * madez (~madez@p57B2DC09.dip0.t-ipconnect.de) Quit (Remote host closed the connection)
  • [23:47:37] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [23:47:37] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [23:51:21] * chaincrusher (~zzzzzzzzz@68.15.179.90) Quit (Ping timeout: 265 seconds)
  • [23:51:55] * kuldeepdhaka (~kuldeepdh@117.254.218.168) has joined #beagle
  • [23:53:22] * dgerlach (~dave@nat/ti/x-shjqhwhdnygteisr) Quit (Quit: Leaving.)
  • [23:55:03] * contempt (contempt@unaffiliated/contempt) Quit (Ping timeout: 246 seconds)
  • [23:56:24] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [23:56:24] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [23:57:13] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Quit: Verlassend)
  • [23:59:38] * willingc (~willingc@cpe-75-80-19-24.san.res.rr.com) has joined #beagle