• [00:00:13] <bmatusiak_> lol
  • [00:00:35] <bmatusiak_> Spirilis, have you done LFS?
  • [00:01:28] <Spirilis> no
  • [00:01:29] <bmatusiak_> http://trac.cross-lfs.org/ ^_^
  • [00:01:50] <Spirilis> I know enough to realize I don't need to embark on an LFS adventure to get my kicks off
  • [00:01:53] <Spirilis> lol
  • [00:02:23] <bmatusiak_> i did lfs like 10 years ago
  • [00:02:30] <bmatusiak_> 2.4.8 kernel
  • [00:03:09] <bmatusiak_> but it would be cool to write one for ARM processors
  • [00:05:16] <bmatusiak_> o they have a clfs-embeded version already
  • [00:08:35] * vvu|Log is now known as vvu|Log_away
  • [00:14:43] <bmatusiak_> i know i asked this before, http://pastebin.com/raw.php?i=xe1hyBBc == why does "/" show up as /dev/mmcblk0p2 when its actually on /dev/mmcblk1p2
  • [00:17:24] * negril_ (~negril@146-52-229-190-dynip.superkabel.de) has joined #beagle
  • [00:18:00] <Spirilis> linux usually orders devices in the order found, so if there's no sd card (sd card = mmcblk0) then the eMMC ends up being #0 to linux's driver
  • [00:18:14] * pkh (~pkh@124.186.109.166) Quit (Ping timeout: 264 seconds)
  • [00:18:24] <Spirilis> shit like that happens with network drivers, scsi, etc
  • [00:18:47] <Spirilis> I've had plenty of fun in the past with servers mysteriously showing the wrong IPs on interfaces with network card swaps 'n stuff ;-)
  • [00:19:12] <Spirilis> ...before redhat et al started putting the MAC address in the /etc/sysconfig/network-scripts/ifcfg-* stuff
  • [00:23:26] <bmatusiak_> i dont think the kernel is doing that
  • [00:23:36] <bmatusiak_> i think its uboot
  • [00:23:57] * drcasper (~ircap@ip68-7-201-116.sd.sd.cox.net) has joined #beaglebone
  • [00:23:57] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (*.net *.split)
  • [00:23:58] * mag (~mgreer@ip68-3-92-114.ph.ph.cox.net) Quit (*.net *.split)
  • [00:23:58] * jzaw (~jzaw@loki.dzki.co.uk) Quit (*.net *.split)
  • [00:23:58] * agmlego (~agmlego@2607:f4b8:10:1:211:43ff:fed8:6a85) Quit (*.net *.split)
  • [00:23:58] * jesselang (~jesse@c-66-41-109-159.hsd1.mn.comcast.net) Quit (*.net *.split)
  • [00:23:58] * Gareth (~gareth@mulder.wiked.org) Quit (*.net *.split)
  • [00:23:58] * vxe (~vex@vx.si) Quit (*.net *.split)
  • [00:23:58] * signal11 (esteban@abq.quaddro.net) Quit (*.net *.split)
  • [00:23:58] * Sorcier_FXK (~Sorcier_F@unaffiliated/sorcierfxk) Quit (*.net *.split)
  • [00:23:58] * jacekowski (jacekowski@jacekowski.org) Quit (*.net *.split)
  • [00:23:58] * davr (~davr@2604:4300:a:a:6a05:caff:fe0c:6042) Quit (*.net *.split)
  • [00:23:58] * biot (~bert@2a01:7b8:2006:ea81::fce2) Quit (*.net *.split)
  • [00:23:58] * negril (~negril@146-52-229-190-dynip.superkabel.de) Quit (*.net *.split)
  • [00:23:58] * ka6sox (ka6sox@nasadmin/ka6sox) Quit (*.net *.split)
  • [00:24:30] <drcasper> hi guys.. just flashed ubuntu raring to the internal memory.. can i run a gui on this thing?
  • [00:24:39] <drcasper> btw. my hdmi does not work.. anyone had any experience with that?
  • [00:25:54] * mag (~mgreer@ip68-3-92-114.ph.ph.cox.net) has joined #beagle
  • [00:26:18] * mag is now known as Guest81731
  • [00:26:27] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) has joined #beagle
  • [00:28:12] * signal11 (esteban@abq.quaddro.net) has joined #beagle
  • [00:29:29] * pkh (~pkh@124.186.109.166) has joined #beagle
  • [00:29:44] * Sorcier_FXK (~Sorcier_F@unaffiliated/sorcierfxk) has joined #beagle
  • [00:31:59] * jesselang (~jesse@c-66-41-109-159.hsd1.mn.comcast.net) has joined #beagle
  • [01:09:51] * JoeJulian (~JoeJulian@shared.gaealink.net) has joined #beagleboard
  • [01:10:05] * JoeJulian (~JoeJulian@shared.gaealink.net) has left #beagleboard
  • [01:10:11] * JoeJulian (~JoeJulian@shared.gaealink.net) has joined #beagle
  • [01:11:13] * stamina (~stamina@221-163-128-083.dynamic.caiway.nl) Quit (Read error: Operation timed out)
  • [01:35:38] * _dv_ (~quassel@chello080108009040.14.11.vie.surfer.at) has joined #beagle
  • [01:35:38] * _dv_ (~quassel@chello080108009040.14.11.vie.surfer.at) has joined #beagleboard
  • [01:36:35] * dv_ (~quassel@chello080108009040.14.11.vie.surfer.at) Quit (Ping timeout: 260 seconds)
  • [01:44:30] * Defiant (erik@e179197119.adsl.alicedsl.de) Quit (Ping timeout: 264 seconds)
  • [01:46:01] * Guest81731 is now known as mag
  • [01:49:59] * Defiant (erik@e177139186.adsl.alicedsl.de) has joined #beagle
  • [01:51:35] * drcasper (~ircap@ip68-7-201-116.sd.sd.cox.net) Quit (Ping timeout: 256 seconds)
  • [01:54:21] * pkh (~pkh@124.186.109.166) Quit (Ping timeout: 276 seconds)
  • [01:54:33] * drcasper (~ircap@ip68-7-201-116.sd.sd.cox.net) has joined #beaglebone
  • [02:01:16] * pkh (~pkh@124.186.109.166) has joined #beagle
  • [02:01:25] * tchan (~tchan@lunar-linux/developer/tchan) Quit (Quit: WeeChat 0.4.1)
  • [02:09:28] * crunchex (~crunchex@c-24-130-51-221.hsd1.ca.comcast.net) Quit (Quit: Leaving)
  • [02:13:13] * ds2 (noinf@netblock-66-245-251-24.dslextreme.com) has joined #beagle
  • [02:16:01] * tchan (~tchan@lunar-linux/developer/tchan) has joined #beagle
  • [02:17:28] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [02:17:28] * jzaw (~jzaw@loki.dzki.co.uk) has joined #beagle
  • [02:17:28] * agmlego (~agmlego@2607:f4b8:10:1:211:43ff:fed8:6a85) has joined #beagle
  • [02:17:28] * Gareth (~gareth@mulder.wiked.org) has joined #beagle
  • [02:17:28] * vxe (~vex@vx.si) has joined #beagle
  • [02:17:28] * jacekowski (jacekowski@jacekowski.org) has joined #beagle
  • [02:17:28] * davr (~davr@2604:4300:a:a:6a05:caff:fe0c:6042) has joined #beagle
  • [02:17:28] * biot (~bert@2a01:7b8:2006:ea81::fce2) has joined #beagle
  • [02:17:28] * ka6sox (ka6sox@nasadmin/ka6sox) has joined #beagle
  • [02:18:48] * Fuzai (~quassel@c-98-232-38-159.hsd1.wa.comcast.net) Quit (Ping timeout: 252 seconds)
  • [02:23:06] * Fuzai (~quassel@c-98-232-38-159.hsd1.wa.comcast.net) has joined #beagle
  • [02:35:59] * diakonos (~diakonos@cpe-72-190-0-125.tx.res.rr.com) has joined #beaglebone
  • [02:37:10] <diakonos> DaveDavenport - thanks for the feedback. Will you suggest what external components are needed for current monitoring? Thanks again!
  • [02:38:22] * Peuc (~Peuc@ip-96-43-239-73.dsl.netrevolution.com) Quit (Quit: Konversation terminated!)
  • [02:39:19] * djerome (~djerome@ip68-98-228-41.ph.ph.cox.net) Quit (Remote host closed the connection)
  • [02:55:24] * bkearns (~bkearns@75-101-54-23.dsl.static.sonic.net) has joined #beagle
  • [02:57:28] * kevlarmusik (4630c2f9@gateway/web/freenode/ip.70.48.194.249) has joined #beagle
  • [02:57:54] * twospoons (4c16ac80@gateway/web/freenode/ip.76.22.172.128) has joined #beagle
  • [02:58:22] <twospoons> anyone had any luck getting qt embedded running on beaglebone black with ubuntu?
  • [03:02:39] <kevlarmusik> Hi all! I just got the BBB and installed Arch on it. I'm having a few issues getting it set up properly though.
  • [03:03:24] <kevlarmusik> I should preface my problems by letting you know that I'm a fairly novice Linux user. That being said, i've done a ton of research on these particular problems and have come across no obvious solutions. (1) Arch runs fine off the micro SD but won't boot when flashed to the eMMC. (2)I've tried to set up a wi-fi usb dongle, but can't seem to figure out how to get it going.
  • [03:05:24] <kevlarmusik> (3)This one is just functionality that i want to bring back. Getting the ethernet over usb going again. It hasn't been working since i installed Arch.
  • [03:06:15] <magyarm> i might be able to help you with usb-ethernet. I'm running arch on my laptop and my beaglebones
  • [03:06:30] <magyarm> do you have g_ether module loaded on the beaglebone?
  • [03:08:06] * twospoons (4c16ac80@gateway/web/freenode/ip.76.22.172.128) Quit (Quit: Page closed)
  • [03:08:19] <magyarm> for (1) how are you flashing Arch? You should just install it to the emmc once booted into arch on the sdcard
  • [03:08:29] * twospoons (4c16ac80@gateway/web/freenode/ip.76.22.172.128) has joined #beagle
  • [03:09:02] <twospoons> since qt is not working, what are the alternatives for GUI development which does not require a window manager?
  • [03:09:21] <magyarm> for (2): what output do you get from dmesg when you plug/unplug the wifi-dongle
  • [03:09:59] <magyarm> twospoons: I'm afraid I've never used a gui on my *bones so can't recommend anything
  • [03:10:31] <twospoons> I'm so close to getting it working on ubuntu.. I just never felt comfortable running Angstrom
  • [03:10:48] <magyarm> what DE are you using? could it be something with that?
  • [03:11:51] <twospoons> headless
  • [03:12:00] <kevlarmusik> thanks for the quick reply! i'm not quite sure HOW to load g_ether. i looked around but i didn't see anything specific to ARM
  • [03:12:30] <magyarm> kevlawmusik: it's exactly the same as desktop. run modprobe g_ether
  • [03:12:34] <kevlarmusik> and again, being a fairly new linux user, kinda wanted to avoid anything possibly breaking my install
  • [03:13:23] <magyarm> um, I break mine fairly regularly :P especially with arch the possibility is there with how quickly it updates
  • [03:13:43] <magyarm> but, just for getting you going with usb networking
  • [03:14:00] <magyarm> make sure you set g_ether to load on boot
  • [03:14:12] <kevlarmusik> amazing...i'll try this out right now and let you know how it goes
  • [03:14:14] <kevlarmusik> :)
  • [03:14:19] <twospoons> I'll see if I can find Derek Molloy's email address and see if he has figured this out.
  • [03:14:56] <magyarm> after you load g_ether, and get stuck again come back and I'll share my scripts for usb ethernet on arch laptop and arch *bone
  • [03:15:17] <magyarm> or, if you like, I can share them now
  • [03:16:08] <magyarm> on the bone: #!/bin/bash
  • [03:16:08] <magyarm> echo "Configuring usb0 192.168.42.4"
  • [03:16:09] <magyarm> ifconfig usb0 192.168.42.4
  • [03:16:09] <magyarm> echo "Adding Default gateway"
  • [03:16:09] <magyarm> route add default gw 192.168.42.3
  • [03:16:18] * natsurou (~natsurou@201.230.214.215) Quit (Quit: Leaving...)
  • [03:16:40] * natsurou (~natsurou@201.230.214.215) has joined #beagle
  • [03:18:19] <magyarm> then on the arch linux host:
  • [03:18:19] <magyarm> ifconfig usb0 192.168.42.3
  • [03:18:19] <magyarm> iptables --table nat --append POSTROUTING --out-inteerface wlan0 -j MASQUERADE
  • [03:18:19] <magyarm> iptables --append FORWARD --in-interface usb0 -j ACCEPT
  • [03:18:19] <magyarm> echo 1 > /proc/sys/net/ipv4/ip_forward
  • [03:18:56] <magyarm> twospoons: are you logging in with vnc?
  • [03:19:10] <twospoons> no, just ssh
  • [03:19:26] <twospoons> there is no window manager installed or vnc
  • [03:20:11] <magyarm> wouldn't qt have dependancies from a DE? or at least from X11?
  • [03:20:23] <twospoons> basically i was able to compile the qt embedded for arm, and deploy those to the beaglebone. The file compiles properly as ELF, but when I try to run the executable it says "file not found"..
  • [03:20:32] <twospoons> magyarm, you might be right
  • [03:20:46] <twospoons> the trouble is trying to find what dependencies I'm missing
  • [03:20:53] <magyarm> pardon if stupid question... I've never needed a gui, but I can imagine it needing stuff from X11 at least
  • [03:21:08] <twospoons> Apparently QT can run using the frame buffer directly
  • [03:21:18] <magyarm> aw, cool
  • [03:21:28] <twospoons> Check out Derek Molloy's vidoes on youtube, pretty amazing stuff
  • [03:21:32] * drcasper (~ircap@ip68-7-201-116.sd.sd.cox.net) Quit (Quit: ? IRcap ? 8.72 ?)
  • [03:21:46] <twospoons> I just dislike Angstrom, I can get it working there :)
  • [03:22:03] * wayne__ (4d08db3b@gateway/web/freenode/ip.77.8.219.59) has joined #beagle
  • [03:22:09] <wayne__> hey
  • [03:22:24] <twospoons> or let me rephrase, I'm more familiar with ubuntu
  • [03:22:27] <magyarm> I've watched a few of them. He does great work explaining everything
  • [03:22:36] <wayne__> can someone tell me if the ubuntu 12.04 image has ssh enabled by default?
  • [03:22:41] <magyarm> are you running ubuntu on your beaglebone now?
  • [03:22:42] <twospoons> 13.04 did
  • [03:22:46] <wayne__> becasue the 13.04 has
  • [03:23:08] <twospoons> I just flashed it back to Angstrom, because I gave up.. But I ran it for a long time working with i2c sensors
  • [03:23:39] <wayne__> yeah but it says here that its the ubuntu minimal and ubuntu usually not has ssh enabled by default, i have no screen to connect
  • [03:24:02] <twospoons> hook up a screen to it I guess and enable it
  • [03:24:11] <kevlarmusik> @magyarm - i need to take care of a couple things here. thank you so much for the info so far. i'll be back in about 30 mins. if you're still around i'm gonna need to pick your brain a little more.
  • [03:24:28] <wayne__> I HAVE TO SCREEN to connect!
  • [03:24:30] <wayne__> like i said
  • [03:24:44] <wayne__> that why i would love it someone could tell me
  • [03:24:46] <magyarm> wayne__: do you have a a serial to usb adapter that you can hook up?
  • [03:25:03] <wayne__> no
  • [03:25:20] <twospoons> wayne; http://www.liberiangeek.net/2012/03/enable-ssh-secure-shell-in-ubuntu-12-04-precise-pangolin/
  • [03:25:49] <wayne__> i guess i will just try but i have this feeling that ssh is not on by default http://www.armhf.com/index.php/boards/beaglebone-black/#precise
  • [03:25:49] <magyarm> kevlarmusik: I might be on, depends if current compile finishes in 30 min or not. going to bed once it's done. I hate waking up to a failed halway through the night :P
  • [03:26:23] <wayne__> thanks for the link but that is no use for me since i would need ssh to enable ssh ^^
  • [03:26:41] <twospoons> not if you hook up a screen and a keyboard..
  • [03:26:44] <magyarm> wayne__ my money would be that it is enabled... otherwise no way to connect to it on embedded device
  • [03:27:07] <wayne__> my screen has DVI and i have no micro hdmi to DVI cable
  • [03:27:37] <twospoons> and you tried the obvious ssh ubuntu@192.168.7.2 ?
  • [03:27:45] <twospoons> over usb
  • [03:28:01] <twospoons> that would be the way to go .. getting a usb cable
  • [03:28:33] <wayne__> i have not tryed anything
  • [03:28:51] <magyarm> kevlarmusik: one more thing to mention to you. most things from the arch wiki apply to arch linux arm. Just have to change a couple things. You get access to the AUR too (just change the PKGBUILD's arch to "armv5h")
  • [03:29:08] <twospoons> I mean.. you need to configure the device somehow.. how would you know what the ip address is?
  • [03:29:13] <wayne__> i just thaught baybe someone saids "no is has not" so i would skip the trouble flashing the sd again ...
  • [03:29:24] <wayne__> i will download flash and try now
  • [03:29:53] <magyarm> best way to try:) I flashed mine 3 time already tonight... I screw things up a lot ;)
  • [03:30:42] <twospoons> the device is listed as arm on the network if you have a router where you can get a list of the devices using dhcp
  • [03:32:05] <twospoons> not sure how reflashing will help.. i mean.. you need to know the ip address to ssh into..
  • [03:32:20] <twospoons> since by default it's dhcp
  • [03:35:08] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) Quit (Ping timeout: 245 seconds)
  • [03:45:25] <JoeJulian> I got a BBB at LinuxCon. I booted it up, saw a UI, plugged in the network cord, and it shut off. Now when I power it up, the lights progress through some sequence (I'm not familiar with what that should be), then it shuts off.
  • [03:46:41] * breakds (~breakds@c-24-0-146-43.hsd1.nj.comcast.net) Quit (Quit: Konversation terminated!)
  • [03:48:10] <wayne__> do the lights all light up at b4 it shuts down?
  • [03:48:13] <magyarm> are you powering from a DC power supply or usb?
  • [03:48:52] * breakds (~breakds@c-24-0-146-43.hsd1.nj.comcast.net) has joined #beagle
  • [03:49:11] <JoeJulian> wayne__: yes
  • [03:49:13] <JoeJulian> magyarm: yes
  • [03:49:18] <JoeJulian> magyarm: er, usb
  • [03:49:24] <wayne__> you should just get the newest offical angstrom linux image, flash it with a sd card with the offical instructions and look if it workd fine after
  • [03:49:39] <wayne__> works*
  • [03:50:05] <wayne__> my default angstrom was buggy, ssh refused connection
  • [03:50:12] <wayne__> by no power down ussues
  • [03:50:17] <wayne__> but*
  • [03:50:34] <JoeJulian> I downloaded and flashed the uncompressed BeagleBone Black (eMMC flasher) image and tried booting. I held the boot button and plugged in the usb cord, but there's no indication that that's working.
  • [03:50:59] <wayne__> i got my bbb with a 8gb microsd that is SO TERRIBLE SLOW
  • [03:51:11] <wayne__> it take ages to write a image on it
  • [03:51:21] <magyarm> I aggree with wayne__. please try booting without the ethernet cable plugged in. It could be that the older version of the OS shuts down when on usb and tring to power from usb. The usb supplies much less than dc
  • [03:52:13] <JoeJulian> Yeah, I went back to just a HDMI cord and am powering with usb.
  • [03:52:57] <JoeJulian> I tried using a 1A usb charger to power, too.
  • [03:53:09] <wayne__> well why the screen?
  • [03:53:28] <JoeJulian> Apparently no reason since I can't see anything on it anyway.
  • [03:53:57] <wayne__> i not even have a screen to connect, just get the image on the card put it in, push the power button and let it flash till all lights light up
  • [03:54:09] <wayne__> i would connect nothing else but power and the sd
  • [03:55:24] <wayne__> freaking hell i need a faster sd card
  • [03:55:36] <wayne__> can the bbb boot from usb sticks as well?
  • [04:03:55] <wayne__> ??hm
  • [04:04:19] <wayne__> i man the user button or what its call not the power btn
  • [04:04:26] <wayne__> meant*
  • [04:08:34] <kevlarmusik> still around @magyarm ?
  • [04:09:36] * kingemer2 (~kingemer@69.169.157.172.provo.static.broadweavenetworks.net) Quit (Read error: No route to host)
  • [04:10:33] * kingemer (~kingemer@69.169.157.172.provo.static.broadweavenetworks.net) has joined #beagle
  • [04:14:29] <kevlarmusik> just tried to "route add default gw 192.168.42.3" and it returned "SIOCADDRT: Network is unreachable"
  • [04:23:15] <wayne__> fuck
  • [04:23:24] <wayne__> now everything is screweed up
  • [04:23:58] <wayne__> my laptop does not recongnise the sd and the bbb is not booting all lights up
  • [04:26:50] * alan_o (~alan@c-76-29-154-88.hsd1.fl.comcast.net) Quit (Remote host closed the connection)
  • [04:29:48] * alan_o (~alan@c-76-29-154-88.hsd1.fl.comcast.net) has joined #beagle
  • [04:33:06] * cyronin (~tj@users.757.org) Quit (Ping timeout: 264 seconds)
  • [04:41:52] * Stanto (Stanto@2600:3c03::f03c:91ff:fe70:1e8d) Quit (Quit: quit!)
  • [04:42:00] * Stanto (Stanto@2600:3c03::f03c:91ff:fe70:1e8d) has joined #beagle
  • [05:09:16] * airk000 (dde056a6@gateway/web/freenode/ip.221.224.86.166) has joined #beagle
  • [05:10:21] * breakds (~breakds@c-24-0-146-43.hsd1.nj.comcast.net) Quit (Remote host closed the connection)
  • [05:10:49] * codemagician (~anon@27.130.32.174) has joined #beaglebone
  • [05:10:49] * codemagician (~anon@27.130.32.174) has joined #beagle
  • [05:11:20] <airk000> hey guys, I want run Ubuntu12.04 in my Beaglebone Black into emmc, but I failed, now the BBB don't blink any led while I plug in power. And I followed this:http://learn.adafruit.com/beaglebone-black-installing-operating-systems/ubuntu
  • [05:11:57] <airk000> What should I do next, plz help me!
  • [05:14:21] * twospoons (4c16ac80@gateway/web/freenode/ip.76.22.172.128) Quit (Ping timeout: 250 seconds)
  • [05:16:20] <wayne__> mmcblk1 is the internal space?
  • [05:17:35] <wayne__> because it said fucking "permision deneid" even with sudo when i try to write a image to it
  • [05:18:24] <airk000> How to flash BBB by the right way?
  • [05:18:47] <wayne__> official documentation lol
  • [05:20:18] <wayne__> write image to SD, connent NOTHING, put sd it, push user button on the beard while you apply power, wait for the LEDS to light up
  • [05:20:46] <wayne__> can take up to 45min, have fun
  • [05:21:40] <airk000> yes, I followed this way, too. But the problem is the LEDS don't blink any way. Why???
  • [05:22:17] <wayne__> did you flash the sd the right way?
  • [05:22:32] * codemagician (~anon@27.130.32.174) Quit (Quit: codemagician)
  • [05:22:51] * alan_o (~alan@c-76-29-154-88.hsd1.fl.comcast.net) Quit (Quit: Leaving)
  • [05:22:57] <wayne__> the leds not light at all?
  • [05:22:59] <airk000> I think yes. use windows
  • [05:23:03] <wayne__> not even the lower singel one?
  • [05:23:25] <airk000> the power led light up, others not.
  • [05:23:35] <wayne__> well they should
  • [05:23:39] <wayne__> no idea
  • [05:23:52] <wayne__> u use usb or real power?
  • [05:24:16] <airk000> use power and real power, both tried.
  • [05:24:21] <wayne__> i have read and heared often that usb power is bad
  • [05:24:29] <wayne__> but for me it works fine
  • [05:24:44] <airk000> can I use the usb power???
  • [05:24:47] <wayne__> weiting for a adapter,, baught the wrong DC ;)
  • [05:25:17] <wayne__> like i said, people saiy you should use a real DC power thing
  • [05:25:17] <airk000> I mean, is the flash must use real power?
  • [05:26:27] <airk000> oh, may be I should buy a real one and hdmi BTW
  • [05:26:51] <wayne__> did you now just said you tryed both?
  • [05:27:04] <airk000> oh yes
  • [05:27:25] <airk000> the usb power and DC
  • [05:27:46] <wayne__> so why you need to buy one, look like you ahve one lol
  • [05:27:48] <airk000> the DC power is Nexus7's power
  • [05:28:11] <wayne__> it should be 5V 1A min i think
  • [05:28:19] <airk000> 5V2A
  • [05:28:25] <wayne__> i baught a 5V2A
  • [05:28:33] <wayne__> but connector is wrong
  • [05:28:37] <wayne__> to small
  • [05:28:44] <wayne__> 1,35mm
  • [05:28:55] <airk000> so I don't need an other real one
  • [05:28:56] <airk000> ???
  • [05:29:03] <wayne__> no
  • [05:29:13] <wayne__> the 5V2A should be fine
  • [05:29:35] <wayne__> so you pushed the user button and then put the power cable in?
  • [05:29:36] <airk000> er...but...why!!! I have bean confused 2 days
  • [05:29:46] <airk000> yes, sure.
  • [05:30:08] <wayne__> maybe your beard is broken
  • [05:30:18] <wayne__> 2 days?
  • [05:30:43] <wayne__> you reflashed the sd, does it show up files on windows?
  • [05:30:57] * Vlad_on_the_road (~Vlad_on_t@ip-66.net-82-216-1.versailles2.rev.numericable.fr) has joined #beagle
  • [05:31:18] <airk000> it's a new board, I don't think it broken
  • [05:31:18] <wayne__> not sure it is not a linux only system
  • [05:31:36] <wayne__> what happens if you jsut boot it wihout a sd?
  • [05:31:47] <wayne__> did it work b4 you tryed to flash it?
  • [05:31:49] <airk000> now nothing!
  • [05:32:20] <airk000> only power light.
  • [05:33:06] <airk000> T_T
  • [05:34:16] * joppefan (~joppefan@c-30f370d5.09-16-67626721.cust.bredbandsbolaget.se) has joined #beagle
  • [05:35:09] * tasslehoff (~tasslehof@77.40.182.98) has joined #beagle
  • [05:37:01] * joppefan (~joppefan@c-30f370d5.09-16-67626721.cust.bredbandsbolaget.se) Quit (Client Quit)
  • [05:38:52] <airk000> pushed the user button and then put the power cable in, does it must work whit in-emmc img???
  • [05:41:32] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Remote host closed the connection)
  • [05:42:00] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [05:42:04] * SysEngr (~SysEngr@ip68-228-241-62.ph.ph.cox.net) has joined #beagle
  • [05:46:26] <wayne__> funny
  • [05:46:35] <wayne__> now i have the exact same shit
  • [05:46:51] <wayne__> my beagle is not shoing up any lamps after boot
  • [05:47:02] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Ping timeout: 264 seconds)
  • [05:47:12] <wayne__> tryed to flash 12.04
  • [05:47:15] <wayne__> ubuntu
  • [05:47:41] <wayne__> ffs i have 13.04 running but wanted the LTS realease for a serious secure mailserver
  • [05:48:05] <airk000> http://circuitco.com/support/index.php?title=Ubuntu_On_BeagleBone_Black
  • [05:48:10] <airk000> is this OK?
  • [05:49:42] <airk000> But there's only ubuntu13.04 can be flash on emmc, right?
  • [05:50:07] <wayne__> yes
  • [05:50:13] <wayne__> wait no this like is bad
  • [05:50:22] <wayne__> the mmc flasher is outdated
  • [05:50:28] <wayne__> there is a newer one
  • [05:50:38] <wayne__> i used it and it worked fine
  • [05:50:42] <airk000> er....I thought I downloaded the ubuntu12.04, maybe it's the error.
  • [05:50:59] <wayne__> yes that might be the case
  • [05:51:00] <wayne__> wait
  • [05:51:38] <airk000> Could u show me the newer one?
  • [05:52:02] <wayne__> yes i wanted ... http://elinux.org/BeagleBoardUbuntu#eMMC:_BeagleBone_Black
  • [05:52:10] <wayne__> this it the better page
  • [05:52:27] <wayne__> they are all speard arround and not central organised it seems
  • [05:52:48] <wayne__> this one worked totally fien for me
  • [05:53:00] <airk000> ok, let me see.
  • [05:53:01] * joppefan (~joppefan@c-30f370d5.09-16-67626721.cust.bredbandsbolaget.se) has joined #beagle
  • [05:53:02] <wayne__> and i will flash it again now with that
  • [05:53:11] * joppefan (~joppefan@c-30f370d5.09-16-67626721.cust.bredbandsbolaget.se) Quit (Client Quit)
  • [05:53:25] * zanarama1 (~zanarama@129.21.114.209) Quit (Ping timeout: 268 seconds)
  • [05:53:39] <airk000> wget https://rcn-ee.net/deb/flasher/raring/BBB-eMMC-flasher-ubuntu-13.04-2013-08-24.img.xz
  • [05:53:41] <airk000> use this???
  • [05:54:57] <airk000> download this, and extract it by 7zip, and then flash it to sdcard, and push sdcard into BBB, and push user button, and then plug in power, and wait for the LEDs blink, am I right?
  • [05:55:48] <wayne__> yes somehow the LEDs should light up b4 you shodl realise the user btn i think
  • [05:56:03] <wayne__> and this image takes not as long as teh offical angrom
  • [05:56:26] <airk000> ok, I see, will try it after work, lots of thanks to u!
  • [05:57:56] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [06:02:53] * kevlarmusik (4630c2f9@gateway/web/freenode/ip.70.48.194.249) Quit (Ping timeout: 250 seconds)
  • [06:05:43] * bhthompson_GR (~bhthompso@c-24-130-58-70.hsd1.ca.comcast.net) Quit (Remote host closed the connection)
  • [06:06:51] * jsst (~jsst@82.176.11.120) Quit (Read error: Connection reset by peer)
  • [06:08:26] * felipebalbi (~balbi@192.91.60.11) Quit (Remote host closed the connection)
  • [06:08:34] * felipebalbi (~balbi@192.91.60.10) has joined #beagle
  • [06:10:18] <mrpackethead> ding ding dong
  • [06:11:20] * rob_w (~bob@unaffiliated/rob-w/x-1112029) has joined #beagle
  • [06:11:34] * lyakh (~lyakh@dslb-084-061-108-099.pools.arcor-ip.net) has joined #beagle
  • [06:20:18] <ds2> ROUND !
  • [06:20:21] <ds2> 1
  • [06:21:06] * Vlad_on_the_road (~Vlad_on_t@ip-66.net-82-216-1.versailles2.rev.numericable.fr) Quit (Ping timeout: 264 seconds)
  • [06:22:03] * orbarron (~orbarron@nat/ti/x-hmbdgfjphuammcax) Quit (Remote host closed the connection)
  • [06:22:29] * orbarron (~orbarron@nat/ti/x-exqmneugfdzbcgox) has joined #beaglebone
  • [06:25:12] * Guest62470 (~bleh1@178.16.2.142) has joined #beagle
  • [06:30:14] * panto (~panto@195.97.110.117) has joined #beagle
  • [06:34:03] * tarnzwerg (~tarnzwerg@unaffiliated/tarnzwerg) Quit (Ping timeout: 248 seconds)
  • [06:34:58] * tarnzwerg (~tarnzwerg@a89-183-50-124.net-htp.de) has joined #beagle
  • [06:34:58] * tarnzwerg (~tarnzwerg@a89-183-50-124.net-htp.de) Quit (Changing host)
  • [06:34:58] * tarnzwerg (~tarnzwerg@unaffiliated/tarnzwerg) has joined #beagle
  • [06:38:57] * bearsh|work (~quassel@189-92.77-83.cust.bluewin.ch) has joined #beagle
  • [06:42:23] <airk000> Hosa! Hosa! Hosa!!!
  • [06:47:31] <bmatusiak_> lol all this stuff about a emmc flasher and qt embeded. and someone saying ubuntu 13.04 can only be flashed...
  • [06:47:39] <bmatusiak_> makes me lol
  • [06:51:46] <DaveDavenport> diakonos: I have very little information to go on.. but lets summarize
  • [06:52:55] <DaveDavenport> if I armember correctly you needed to measure several ma's. this makes ahll sensors unsuitable. (the affordable ones for sure)
  • [06:53:40] <DaveDavenport> so small exact shunt resistors + instrumentation amplifier then feed it to ADC
  • [06:54:23] <DaveDavenport> and you probably want some overvoltage protection after the amp, to not destroy your adc
  • [06:58:40] * emeb_mac (~ericb@ip72-223-90-58.ph.ph.cox.net) Quit (Quit: emeb_mac)
  • [07:00:09] * jsst (~jsst@82.176.11.120) has joined #beagle
  • [07:10:43] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [07:15:01] * Guest62470 (~bleh1@178.16.2.142) Quit (Ping timeout: 245 seconds)
  • [07:15:32] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [07:20:08] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Remote host closed the connection)
  • [07:20:36] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [07:24:31] * ant_work (~ant@host54-128-static.10-188-b.business.telecomitalia.it) has joined #beagle
  • [07:25:09] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Ping timeout: 252 seconds)
  • [07:26:00] * Mode-M (~Null@gateway/tor-sasl/mode-m) has joined #beagle
  • [07:31:28] * florian_kc (~fuchs@port-217-146-132-69.static.qsc.de) has joined #beagle
  • [07:31:30] * florian_kc (~fuchs@port-217-146-132-69.static.qsc.de) Quit (Changing host)
  • [07:31:30] * florian_kc (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [07:31:38] * florian_kc is now known as florian
  • [07:33:16] * dogmatic69 (~dogmatic6@cpc10-telf10-2-0-cust20.wolv.cable.virginmedia.com) has joined #beagle
  • [07:38:42] * louiz920 (~a0272879@nat/ti/x-htwfotifipckilbt) has joined #beagle
  • [07:39:03] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [07:43:18] * pkh (~pkh@124.186.109.166) Quit (Ping timeout: 252 seconds)
  • [07:49:27] * kbart (~KBart@213.197.143.19) has joined #beagle
  • [07:51:55] * W1N9Zr0 (~W1N9Zr0@69-165-241-155.cable.teksavvy.com) Quit (Disconnected by services)
  • [07:52:09] * W1N9Zr0 (~W1N9Zr0@69.165.241.155) has joined #beagle
  • [07:52:25] * dys (~user@2a01:1e8:e100:8296:21a:4dff:fe4e:273a) has joined #beagle
  • [07:53:21] * Shadyman (~matthew@unaffiliated/shadyman) Quit (Ping timeout: 245 seconds)
  • [07:54:06] * louiz920 (~a0272879@nat/ti/x-htwfotifipckilbt) Quit (Remote host closed the connection)
  • [07:57:20] * Shadyman (~matthew@unaffiliated/shadyman) has joined #beagle
  • [07:58:26] * bizulk (~sli@h67.cornut.fr) has joined #beagleboard
  • [07:58:26] * bizulk (~sli@h67.cornut.fr) has joined #beagle
  • [07:59:33] * maayan (c3f4172a@gateway/web/freenode/ip.195.244.23.42) has joined #beagle
  • [08:01:54] <maayan> I am trying to do ssh connection for the first time on the beaglebone black via "Gate One" and I keep getting this:
  • [08:01:57] <maayan> ssh_exchange_identification: Connection closed by remote host
  • [08:03:09] <maayan> I am entering "localhost", port 22, user: root
  • [08:04:14] * cyronin (~tj@users.757.org) has joined #beagle
  • [08:15:45] * yejun (18054cba@gateway/web/freenode/ip.24.5.76.186) has joined #beagle
  • [08:17:44] * pkh (~pkh@124.186.109.166) has joined #beagle
  • [08:20:57] * drakkan1000 (~drakkan@dynamic-adsl-94-36-186-15.clienti.tiscali.it) has joined #beagle
  • [08:23:27] * pkh (~pkh@124.186.109.166) Quit (Ping timeout: 252 seconds)
  • [08:28:19] * shaunbaker (~shaunbake@brick-lane.lbi.co.uk) has joined #beagle
  • [08:28:40] * Adam___ (73f91fc2@gateway/web/freenode/ip.115.249.31.194) has joined #beagle
  • [08:30:47] <Adam___> Hi!, i wanna Include GStreamer 1.0 in the Build image i made. any advice on how to go about? I can modify the Recepie directly in Angstrom-Images need to add some stuff etc?
  • [08:34:42] * jackmitchell (~Thunderbi@cbnluk-gw0.cambridgebroadband.com) has joined #beagle
  • [08:35:00] * honschu_ (~honschu@shackspace/j4fun) has joined #beagle
  • [08:36:03] * honschu (~honschu@shackspace/j4fun) Quit (Read error: Operation timed out)
  • [08:37:07] * Shadyman (~matthew@unaffiliated/shadyman) Quit (Quit: Leaving.)
  • [08:37:11] <dm8tbr> Adam___: you'd need to set up the build environment and build it on some host machine if gstreamer 1.0 is not in the repositories
  • [08:37:35] * yejun (18054cba@gateway/web/freenode/ip.24.5.76.186) Quit (Ping timeout: 250 seconds)
  • [08:38:41] * c10ud (~c10ud@emesene/dictator/c10ud) has joined #beagle
  • [08:39:47] <jackmitchell> morning all
  • [08:41:52] <av500> gm
  • [08:42:12] <av500> Adam___: build stock angstrom for a start
  • [08:42:21] <av500> then you have all the toolchain and libs
  • [08:42:30] <av500> then look at the gst recipes and adapt them for 1.0
  • [08:42:41] <av500> deal with all the breakage and other fallout
  • [08:48:51] * Adam___ (73f91fc2@gateway/web/freenode/ip.115.249.31.194) Quit (Ping timeout: 250 seconds)
  • [08:55:43] * drakkan1000 (~drakkan@dynamic-adsl-94-36-186-15.clienti.tiscali.it) Quit (Quit: Ex-Chat)
  • [08:59:41] * maayan (c3f4172a@gateway/web/freenode/ip.195.244.23.42) Quit (Ping timeout: 250 seconds)
  • [09:00:07] * wayne__ (4d08db3b@gateway/web/freenode/ip.77.8.219.59) Quit (Ping timeout: 250 seconds)
  • [09:13:49] * pkh (~pkh@124.186.109.166) has joined #beagle
  • [09:15:42] * ruben___ (d908320e@gateway/web/freenode/ip.217.8.50.14) has joined #beagle
  • [09:16:19] * vvu|Log_away is now known as vvu|Log
  • [09:24:49] * airk000 (dde056a6@gateway/web/freenode/ip.221.224.86.166) Quit (Ping timeout: 250 seconds)
  • [09:28:03] * fzombie (~gplgeek@pdpc/supporter/student/GPLGeek) Quit (Ping timeout: 245 seconds)
  • [09:28:40] * pkh (~pkh@124.186.109.166) Quit (Ping timeout: 264 seconds)
  • [09:36:47] * VirG (~VirGin@c-71-204-168-187.hsd1.ca.comcast.net) Quit (Quit: Leaving.)
  • [09:55:29] * vasanth_ (dfef8e14@gateway/web/freenode/ip.223.239.142.20) has joined #beagle
  • [09:55:34] <vasanth_> hi
  • [09:59:05] * vvu|Log is now known as vvu|Log_away
  • [09:59:15] * vvu|Log_away is now known as vvu|Log
  • [09:59:17] * codemagician (~anon@27.130.32.174) has joined #beaglebone
  • [09:59:18] * codemagician (~anon@27.130.32.174) has joined #beagle
  • [09:59:27] * stamina (~stamina@221-163-128-083.dynamic.caiway.nl) has joined #beaglebone
  • [09:59:55] * vasanth_ (dfef8e14@gateway/web/freenode/ip.223.239.142.20) Quit (Ping timeout: 250 seconds)
  • [10:00:54] * SysEngr (~SysEngr@ip68-228-241-62.ph.ph.cox.net) Quit (Remote host closed the connection)
  • [10:02:24] * dwery (~dwery@nslu2-linux/dwery) has joined #beagle
  • [10:04:56] * Wipster (~Wip@host81-137-80-202.in-addr.btopenworld.com) has joined #beagle
  • [10:06:39] * Mode-M (~Null@gateway/tor-sasl/mode-m) Quit (Remote host closed the connection)
  • [10:17:20] * pkh (~pkh@124.186.109.166) has joined #beagle
  • [10:17:26] * c10ud (~c10ud@emesene/dictator/c10ud) Quit (Ping timeout: 240 seconds)
  • [10:23:35] * vvu|Log is now known as vvu|Log_away
  • [10:34:48] * mythos (~mythos@unaffiliated/mythos) Quit (Read error: Operation timed out)
  • [10:53:30] * ezequielgarcia (~elezegarc@190.2.109.79) has joined #beagle
  • [11:05:46] * vvu|Log_away is now known as vvu|Log
  • [11:09:42] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Remote host closed the connection)
  • [11:10:11] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [11:11:34] * backjlack (~quassel@unaffiliated/backjlack) has joined #beagle
  • [11:13:31] * Fusty|Away (~Fusty@2607:5300:60:b49::1) Quit (Ping timeout: 260 seconds)
  • [11:13:44] * backjlack (~quassel@unaffiliated/backjlack) Quit (Remote host closed the connection)
  • [11:14:29] * Fusty|Away (~Fusty@ks4002544.ip-198-100-148.net) has joined #beagle
  • [11:14:35] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Ping timeout: 248 seconds)
  • [11:14:53] * nash__ (2e26b1e4@gateway/web/freenode/ip.46.38.177.228) has joined #beagle
  • [11:15:52] <KotH> a wonderfull, JIHAD!
  • [11:16:05] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [11:17:41] <nash__> Hi all, I would like to know how to port linux kernel on to beagleboard xm REV-C. I am new to this and would like to learn and implement the same from scratch. Like how to build patches for particular board and how to get cross compilers etc. Thank you in advance for any information
  • [11:17:59] * yuyu (6a33bc0b@gateway/web/freenode/ip.106.51.188.11) has joined #beagle
  • [11:18:05] * c10ud (~c10ud@emesene/dictator/c10ud) has joined #beagle
  • [11:18:07] <av500> its already ported
  • [11:19:04] <nash__> Yes, I know its already ported and myself have ported ubuntu using some scripts
  • [11:19:18] <nash__> but I want to do it from scratch
  • [11:19:36] <yuyu> helloo...I connected max7318 Ic as slave to my BBB using external pull-up resistors....But when i type i2cdetect -y -r 0 / i2cdetect -y -r 1...its not detecting any device....
  • [11:19:46] <av500> you did not port ubuntu
  • [11:19:49] <av500> you installed it
  • [11:20:22] <nash__> I'm sorry yes I installed it and its working fine
  • [11:21:32] <yuyu> <av500> any suggestion.....???
  • [11:21:51] * backjlack (~quassel@unaffiliated/backjlack) has joined #beagle
  • [11:22:00] <av500> no...!!!
  • [11:22:08] * backjlack (~quassel@unaffiliated/backjlack) Quit (Remote host closed the connection)
  • [11:22:28] <yuyu> av500...what may be the problem...??
  • [11:22:31] * cbrake (~cbrake@oh-67-76-203-50.sta.embarqhsd.net) Quit (Quit: Lost terminal)
  • [11:22:42] <KotH> yuyu: the problem is that you have not read the data sheet
  • [11:22:54] <KotH> yuyu: not all i2c devices can be detected
  • [11:23:00] <nash__> <av500> Please any info regarding porting
  • [11:23:07] <yuyu> i have read it..yuyu
  • [11:23:21] <KotH> nash__: if you want to port the linux kernel, then you need to learn linux very very very very very very very very very very very very very very very well
  • [11:23:24] <av500> nash__: do you understand what "porting" means?
  • [11:23:46] * pkh (~pkh@124.186.109.166) Quit (Ping timeout: 245 seconds)
  • [11:23:46] <KotH> av500: he knows what _he_ means with porting
  • [11:23:56] <yuyu> koth..then how can i know whether my device is working or not...??
  • [11:23:57] <av500> that is not what I asked
  • [11:24:38] <KotH> yuyu: connect a logic analyzer and see what is going over the wire
  • [11:24:39] * cbrake (~cbrake@oh-67-76-203-50.sta.embarqhsd.net) has joined #beagle
  • [11:24:50] <KotH> yuyu: or use an osciloscope
  • [11:27:10] <nash__> porting is something means making the operating system work on unfamiliar hardware
  • [11:27:15] <yuyu> <KotH>...on oscilloscope i am not able to find anything....So i connected a slave and tried with 'i2cdetect' command....but in the response it is not showing any device...
  • [11:27:18] <nash__> Thats what i think
  • [11:27:38] * codemagician (~anon@27.130.32.174) Quit (Ping timeout: 245 seconds)
  • [11:27:40] <nash__> apology if im wrong
  • [11:27:46] <KotH> yuyu: "not detect anything" means you dont see any signal?
  • [11:28:13] <yuyu> t@beaglebone:~# i2cdetect -y -r 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- UU -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- UU -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: UU -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -
  • [11:28:17] <KotH> nash__: in theory you are right, but i think you do not understand what it actually means
  • [11:28:20] <av500> nash__: yes
  • [11:28:21] <KotH> yuyu: use pastebin
  • [11:28:27] <yuyu> this is the response am getting....
  • [11:28:48] <av500> nash__: and as I said, it has been ported already
  • [11:29:03] <yuyu> only 'UU' IS there...
  • [11:29:05] <av500> as for cross compiler, google it
  • [11:29:16] * codemagician (~anon@14.207.6.66) has joined #beaglebone
  • [11:29:16] * codemagician (~anon@14.207.6.66) has joined #beagle
  • [11:29:19] <av500> and what does that mean?
  • [11:30:39] * backjlack (~quassel@unaffiliated/backjlack) has joined #beagle
  • [11:31:43] * StyxAlso (~mark@27-32-54-38.static.tpgi.com.au) has joined #beaglebone
  • [11:32:30] * mythos (~mythos@unaffiliated/mythos) has joined #beagle
  • [11:33:47] <nash__> I really very week with all these concepts... please help me learn
  • [11:34:40] <LetoThe2nd> nash__: read the book "Building embedded linux systems" by Karim Yaghmour. Come back afterwars.
  • [11:34:46] <LetoThe2nd> afterwards, even.
  • [11:34:58] <LetoThe2nd> KotH: you on the other hand may come back after wars.
  • [11:35:03] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Remote host closed the connection)
  • [11:35:31] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [11:36:27] <nash__> Thank you LetoThe2nd
  • [11:36:28] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Read error: Connection reset by peer)
  • [11:36:46] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [11:38:01] * KyleYankan (KyleYankan@hive76/member/KyleYankan) has joined #beagle
  • [11:40:11] * yuyu (6a33bc0b@gateway/web/freenode/ip.106.51.188.11) Quit (Quit: Page closed)
  • [11:43:33] * codemagician (~anon@14.207.6.66) Quit (Quit: codemagician)
  • [11:44:43] * KSRANA (KSRANA@91.72.175.10) has joined #beagle
  • [11:45:06] * KSRANA (KSRANA@91.72.175.10) has left #beagle
  • [11:51:55] * natsukao (~natsukao@dynamic-adsl-94-37-175-21.clienti.tiscali.it) Quit (Ping timeout: 248 seconds)
  • [11:51:57] <av500> nash__: go and play around with Linux for some time
  • [11:51:59] <av500> build a kernel
  • [11:52:06] <av500> etc
  • [11:52:11] <av500> get yourself familiar
  • [11:52:16] <KotH> LetoThe2nd: the war is nearly over
  • [11:52:24] <av500> then you will be able to answer many questions yourself
  • [11:52:24] <KotH> LetoThe2nd: i have to give my military equipment back
  • [11:52:58] <KyleYankan> Morning everyone. Just got my first beaglebone at maker faire for a project. Thought it was well suited.
  • [11:53:11] <KotH> greetings KyleYankan
  • [11:53:16] <KotH> and welcome to the beagle family
  • [11:53:44] <KyleYankan> Heh. I'm researching more specifics now to find out more about it, specifically the GPIO
  • [11:54:44] <KotH> gpio is easy
  • [11:55:18] <LetoThe2nd> KyleYankan: have fun. just remember one thing: whenever someone tells you to poke /dev/kmem, he/she is certainly wrong :)
  • [11:55:43] <KyleYankan> Just curious, early morning googling here is non-productive (first cup of coffee is still being prepeared) but can it do things like i2c, uart, etc via GPIO? Is it certain pins like the Atmel controllers?
  • [11:55:53] <KyleYankan> LetoThe2nd: Can I `touch` it instead? :-P
  • [11:57:04] <av500> KyleYankan: GPIO pins have other functions yes.
  • [11:57:10] <KotH> KyleYankan: you can do i2c and spi with hardware support (recommended) or on gpio (aka bitbanging, not recommended)
  • [11:57:21] <KotH> KyleYankan: for more information read the TRM
  • [11:57:25] <av500> but unlike arduino, most other functions are behind kernel drivers
  • [11:57:44] <av500> so you do not e.g. write to the I2C registers directly
  • [11:57:48] <av500> you used the I2C driver
  • [11:57:55] <KyleYankan> I see, I see.
  • [11:57:57] <av500> same for UART, SPI etc...
  • [11:58:16] <KyleYankan> I'm looking for the TRM now.
  • [11:58:59] <KyleYankan> Sounds like an excellent platform. Kind of a great mix between the RPi/Arduino, yet somehow more powerful than both.
  • [11:59:41] * Peuc (~Peuc@ip-96-43-239-73.dsl.netrevolution.com) has joined #beagle
  • [12:00:59] * palesius (6152d602@gateway/web/freenode/ip.97.82.214.2) has joined #beagle
  • [12:01:47] <KotH> KyleYankan: and you have the PRU too :)
  • [12:02:21] <palesius> I had a few questions about the USB on the beagleboards (specifically the beaglebone black). Does anyone know how many endpoints are supported as a client (and can they be bidirectional)?
  • [12:02:45] <KotH> palesius: that's written in the TRM as well
  • [12:03:05] <palesius> Also can the client/host usb ports simulate a physical disconect (so enumeration is redone)
  • [12:03:11] <KyleYankan> KotH: PRU?
  • [12:04:10] <KotH> KyleYankan: something like a uC on your system, with which you can set GPIOs cycle exact with up to 200MHz
  • [12:04:18] <palesius> duh thanks, sorry just found it
  • [12:04:23] <KotH> np
  • [12:04:50] <KotH> palesius: http://26-26-54.hardwarebug.org/196
  • [12:05:05] <KyleYankan> Ah, sweet computah of missoula.
  • [12:05:43] <KotH> KyleYankan: if you want to know more about the PRU, read the revision c of the TRM (it's floating around on the intarwebz)
  • [12:06:31] <KyleYankan> i'm on elinux.org's article on it - http://elinux.org/ECE497_BeagleBone_PRU
  • [12:07:11] * yuyu (6a33bc0b@gateway/web/freenode/ip.106.51.188.11) has joined #beagle
  • [12:07:23] <KyleYankan> I mean, I know I'm new to this, but I kind of feel like a fool buying a RPi. I like their educational goals and all, and am glad to support them, but for projects? this seems like the better solution
  • [12:08:03] <yuyu> <koth>...is there any otherway to check i2c...???
  • [12:08:41] <KotH> KyleYankan: there are rumors that the rpi was meant to sell of the old stock of chips and the "educational" part is just a cover for it
  • [12:08:58] <KotH> yuyu: beside using a logic analyzer or an oscilloscope?
  • [12:09:30] <KotH> yuyu: well, that's like asking whether there is a way to check whether you have power other than measuring the voltage
  • [12:09:46] <KotH> yuyu: yes, there are, but they are not reliable
  • [12:10:07] <yuyu> after connecting oscilloscope...can i check with command 'i2cdetect -y -r 0'...
  • [12:10:08] <KyleYankan> KotH: I'm sure there's lot sof rumors. I've met with a fe wof the Rpi guys. I don't know how true that is asmuch as it is about sticking to the entirely open source model
  • [12:10:30] <yuyu> to check whether it is providing clock or not
  • [12:10:38] <KotH> KyleYankan: do they finally have all kernel stuff opensource?
  • [12:10:41] <KyleYankan> But for guys like me, who love me some open source but are on a budget/need to get projects done... some closed source stuff is acceptable, like the ARM istructions.
  • [12:10:58] <KotH> KyleYankan: arm instructions?
  • [12:11:02] <KyleYankan> KotH: Not sur eif it's 100%, but I was told it's dang close. I'm not a kernel guy. Just get me running perl or python on it and I'm good.
  • [12:11:19] <panto> err, you just lost us here
  • [12:11:28] * Graf__ (897a4022@gateway/web/freenode/ip.137.122.64.34) has joined #beagle
  • [12:11:30] <KyleYankan> KotH: The instruction set? https://www.scss.tcd.ie/john.waldron/3d1/QRC0001H_rvct_v2.1_arm.pdf
  • [12:11:42] <KotH> KyleYankan: that's not closed source
  • [12:12:04] <KyleYankan> Oh. I thought it was relatively undocument/closed source for most newer processors in the ARM family.
  • [12:12:12] <KotH> KyleYankan: unless you mean that arm doesn't like anyone building a cpu that does implement the arm ISA
  • [12:12:14] <KyleYankan> Maybe I just need more coffee. My mistake.
  • [12:12:20] <KotH> KyleYankan: google for "ARM ARM"
  • [12:12:58] <KotH> KyleYankan: arm is not stupid enough to think that closing the cpu specs would give them any advantage
  • [12:13:36] <panto> KotH, don't assume anything about the stupidity of huge corporations
  • [12:13:41] <panto> *cough*secure worlds*cough*
  • [12:13:42] <KyleYankan> Ah, I gotcha. Makes sense. So what are they still keeping closed source?
  • [12:14:22] <KotH> panto: i dont assume anything either. it's just that arm proved to have some minimal inteligence....until now
  • [12:14:30] * firemanxbr (~firemanxb@187.107.49.183) has joined #beagle
  • [12:14:39] <KotH> KyleYankan: the actual VHDL source is closed
  • [12:14:54] <KotH> KyleYankan: but people writing OSS have never cared about building their own hardware
  • [12:15:13] <KotH> KyleYankan: it was always these freaks of electrical engineers who were obsessed with building things you can touch
  • [12:15:50] <KyleYankan> Oh, I see. I was pretty far off the mark there. This kind of stuff is much deeper than my interest/skill-level lie, TBH.
  • [12:16:31] <panto> lunch
  • [12:16:36] <KotH> dont worry, you'll absorb most of that knowledge by osmosis, if you stick to us for long enough
  • [12:16:40] <KotH> panto: en guete!
  • [12:17:16] * _dv_ is now known as dv_
  • [12:17:43] * Graf__ (897a4022@gateway/web/freenode/ip.137.122.64.34) Quit (Ping timeout: 250 seconds)
  • [12:18:13] * gustavoz (~gustavoz@host126.190-136-121.telecom.net.ar) has joined #beagle
  • [12:20:48] * NishanthMenon (~nmenon@nat/ti/x-yahfhrsodkcesvcu) has joined #beagle
  • [12:23:46] * firemanxbr (~firemanxb@187.107.49.183) Quit (Quit: Leaving)
  • [12:24:31] * yuyu (6a33bc0b@gateway/web/freenode/ip.106.51.188.11) Quit (Quit: Page closed)
  • [12:27:11] * firemanxbr (~firemanxb@187.107.49.183) has joined #beagle
  • [12:28:36] * shaunbaker (~shaunbake@brick-lane.lbi.co.uk) Quit (Remote host closed the connection)
  • [12:29:47] * StyxAlso (~mark@27-32-54-38.static.tpgi.com.au) Quit (Ping timeout: 248 seconds)
  • [12:30:18] * shaunbaker (~shaunbake@public.lbi.co.uk) has joined #beagle
  • [12:30:32] * illum (~illum@dynamic-acs-24-101-9-34.zoominternet.net) Quit (Remote host closed the connection)
  • [12:32:14] * illum (~illum@dynamic-acs-24-101-9-34.zoominternet.net) has joined #beagle
  • [12:32:58] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Remote host closed the connection)
  • [12:33:25] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [12:36:50] * graf__ (897ac977@gateway/web/freenode/ip.137.122.201.119) has joined #beagle
  • [12:37:23] * StyxAlso (~mark@27-32-54-38.static.tpgi.com.au) has joined #beaglebone
  • [12:38:16] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Ping timeout: 264 seconds)
  • [12:38:58] * alan_o (~alan@c-76-29-154-88.hsd1.fl.comcast.net) has joined #beagle
  • [12:41:07] * graf__ (897ac977@gateway/web/freenode/ip.137.122.201.119) Quit (Ping timeout: 250 seconds)
  • [12:41:37] * thurgood (~thurgood@cpe-70-113-204-247.austin.res.rr.com) Quit (Remote host closed the connection)
  • [12:42:21] <diakonos> thanks DaveDvenport! Appreciate it!
  • [12:43:04] * intern_ (4b91f021@gateway/web/freenode/ip.75.145.240.33) has joined #beagle
  • [12:43:13] <intern_> hey good morning
  • [12:44:51] * StyxAlso (~mark@27-32-54-38.static.tpgi.com.au) Quit (Quit: Leaving)
  • [12:47:31] * jackmitchell (~Thunderbi@cbnluk-gw0.cambridgebroadband.com) Quit (Read error: Connection reset by peer)
  • [12:48:06] * jackmitchell (~Thunderbi@cbnluk-gw0.cambridgebroadband.com) has joined #beagle
  • [12:54:05] * codemagician (~anon@14.207.6.66) has joined #beaglebone
  • [12:54:05] * codemagician (~anon@14.207.6.66) has joined #beagle
  • [12:55:54] * awozniak (~awozniak@74.82.132.35) Quit (Ping timeout: 264 seconds)
  • [12:56:17] * codemagician (~anon@14.207.6.66) Quit (Client Quit)
  • [12:57:33] * awozniak (~awozniak@74.82.132.35) has joined #beagle
  • [12:58:28] * thurgood (~thurgood@64.132.24.36) has joined #beagle
  • [13:02:09] * drakkan1000 (~drakkan@dynamic-adsl-94-36-186-15.clienti.tiscali.it) has joined #beagle
  • [13:05:24] * VirG (~VirGin@63.110.51.11) has joined #beagle
  • [13:06:24] * eikeon (~eikeon@c-98-218-6-128.hsd1.dc.comcast.net) Quit (Quit: eikeon)
  • [13:08:08] * dgerlach (~dave@nat/ti/x-topwtkopsmghngrq) has joined #beagle
  • [13:10:34] * shaunbaker (~shaunbake@public.lbi.co.uk) Quit (Remote host closed the connection)
  • [13:11:05] <av500> https://wiki.openjdk.java.net/display/OpenJFX/DukePad
  • [13:11:06] <av500> java all the thinks
  • [13:15:49] * KotH converts av500 to java
  • [13:16:07] * shaunbaker (~shaunbake@public.lbi.co.uk) has joined #beagle
  • [13:17:10] * shaunbak_ (~shaunbake@brick-lane.lbi.co.uk) has joined #beagle
  • [13:20:51] * shaunbaker (~shaunbake@public.lbi.co.uk) Quit (Ping timeout: 245 seconds)
  • [13:27:26] * robert-km (d956bc71@gateway/web/freenode/ip.217.86.188.113) has joined #beagle
  • [13:27:40] * tasslehoff (~tasslehof@77.40.182.98) Quit (Quit: WeeChat 0.4.0)
  • [13:28:38] <robert-km> Hi, I need a little help with capemgr. I wrote my simple I2C driver, inserted it into a kernel, but don't know how to call probe method.
  • [13:29:07] <robert-km> Previously, there should be written platform_data for the i2c subsystem
  • [13:29:52] <robert-km> but now, I don't know what and where put this data into dts files.
  • [13:36:09] * mrj10 (~mrj10@207-45-85-192.nexgenisp.net) has left #beagle
  • [13:36:59] <robert-km> I suspect, there is no change needed in the kernel side, so dev_get_platdata should work just fine
  • [13:37:20] * NishanthMenon (~nmenon@nat/ti/x-yahfhrsodkcesvcu) Quit (Quit: You should go home too.)
  • [13:42:12] * illum (~illum@dynamic-acs-24-101-9-34.zoominternet.net) Quit (Ping timeout: 276 seconds)
  • [13:42:51] * illum (~illum@dynamic-acs-24-101-9-34.zoominternet.net) has joined #beagle
  • [13:44:37] <panto> robert-km, there are no platform data anymore
  • [13:44:42] <panto> gone
  • [13:44:44] <panto> *poof*
  • [13:45:16] <LetoThe2nd> panto: not p????f?
  • [13:45:30] <panto> pfft means something different
  • [13:45:58] <mru> p????f
  • [13:46:13] <LetoThe2nd> \o/ mru
  • [13:47:38] * shaunbak_ (~shaunbake@brick-lane.lbi.co.uk) Quit (Read error: Connection reset by peer)
  • [13:48:03] * shaunbaker (~shaunbake@brick-lane.lbi.co.uk) has joined #beagle
  • [13:48:43] * ruben___ (d908320e@gateway/web/freenode/ip.217.8.50.14) Quit (Ping timeout: 250 seconds)
  • [13:48:44] <robert-km> So how to describe register address?
  • [13:49:09] <panto> http://elinux.org/BeagleBone_and_the_3.8_Kernel
  • [13:50:04] <robert-km> if my driver is called atmega on address 0x09, should I write atmega@09 {compatible="atmega; reg=<0x09>; } in i2c dts file?
  • [13:51:31] <panto> depends on the DT binding
  • [13:51:56] <mru> p????f
  • [13:52:05] <panto> look in Documentation/devicetree/bindings/ for the bindings of the device
  • [13:52:27] <panto> I feel like I've missed some joke in #beagle
  • [13:52:59] <mru> panto: #beagle is the joke
  • [13:53:02] <LetoThe2nd> ah wh???
  • [13:53:24] <LetoThe2nd> panto: it's all about more dots. more dots -> more evil.
  • [13:53:28] * jackmitchell (~Thunderbi@cbnluk-gw0.cambridgebroadband.com) Quit (Quit: jackmitchell)
  • [13:53:34] <panto> .......
  • [13:53:47] <LetoThe2nd> http://en.wikipedia.org/wiki/Heavy_metal_umlaut
  • [13:53:48] <mru> ?????????
  • [13:54:18] * darknighte_znc is now known as darknighte
  • [13:55:01] <dm8tbr> LetoThe2nd: you rang?
  • [13:55:08] <LetoThe2nd> \o/
  • [13:55:28] <dm8tbr> \m/
  • [13:55:34] <LetoThe2nd> dm8tbr: you got a trigger on "more evil"?
  • [13:55:49] <dm8tbr> no on
  • [13:55:54] <dm8tbr> mu
  • [13:56:05] <dm8tbr> dont ask...
  • [13:56:14] <LetoThe2nd> hrhrhr
  • [13:56:36] <dm8tbr> it's fun tho
  • [13:56:53] * _chase_ (~a0271661@nat/ti/x-wqyivjnybqroqldl) has joined #beagle
  • [13:58:54] * prpplague is now known as prp^2
  • [14:01:13] * dgerlach (~dave@nat/ti/x-topwtkopsmghngrq) Quit (Remote host closed the connection)
  • [14:01:59] * drakkan1000 (~drakkan@dynamic-adsl-94-36-186-15.clienti.tiscali.it) Quit (Quit: Ex-Chat)
  • [14:03:16] <KotH> dm8tbr: why?
  • [14:05:38] * shaunbaker (~shaunbake@brick-lane.lbi.co.uk) Quit (Ping timeout: 264 seconds)
  • [14:07:00] * palesius (6152d602@gateway/web/freenode/ip.97.82.214.2) Quit (Quit: Page closed)
  • [14:10:15] * eikeon (~eikeon@140.147.245.140) has joined #beagle
  • [14:10:17] <mru> KotH: ??
  • [14:11:26] <panto> mru, ??
  • [14:11:32] <VirG> Hello People
  • [14:14:18] <dm8tbr> KotH: because I can!
  • [14:16:21] * prp^2 (~prpplague@107-206-64-184.lightspeed.rcsntx.sbcglobal.net) Quit (Quit: Leaving)
  • [14:17:40] * shaunbak_ (~shaunbake@brick-lane.lbi.co.uk) has joined #beagle
  • [14:18:30] <KotH> dm8tbr: yappari!
  • [14:18:59] <dm8tbr> yipiekayay!
  • [14:19:11] * jackmitchell (~Thunderbi@cbnluk-gw0.cambridgebroadband.com) has joined #beagle
  • [14:19:30] <LetoThe2nd> http://www.youtube.com/watch?v=zFKzsM4gJnc
  • [14:20:14] * nick-dev (4a0a4842@gateway/web/freenode/ip.74.10.72.66) has joined #beagle
  • [14:24:41] * nick-dev (4a0a4842@gateway/web/freenode/ip.74.10.72.66) Quit (Ping timeout: 250 seconds)
  • [14:28:38] * josh1 (~josh@67.8.72.102) Quit (Ping timeout: 240 seconds)
  • [14:28:55] * emeb_mac (~ericb@ip72-223-90-58.ph.ph.cox.net) has joined #beagle
  • [14:30:28] <KotH> dm8tbr: yipieyayeh schweinebacke?
  • [14:30:45] <dm8tbr> that one
  • [14:32:08] <LetoThe2nd> KotH: exactly.
  • [14:33:11] * joel_ (~joel@nat/ti/x-yhyeuudbsiygvriw) has joined #beagle
  • [14:33:28] * LordDVG (~LordDVG@unaffiliated/lorddvg) has joined #beagle
  • [14:46:59] * rob_w (~bob@unaffiliated/rob-w/x-1112029) Quit (Quit: Ex-Chat)
  • [14:50:43] * dgerlach (~dave@nat/ti/x-uvairlqssqekgfgo) has joined #beagle
  • [14:51:17] * sedtx (~sedtx@pool-71-123-167-69.dllstx.dsl-w.verizon.net) Quit (Ping timeout: 248 seconds)
  • [14:55:26] * m_billybob drags himself in out of the forrest
  • [14:55:33] <m_billybob> morning . . .
  • [14:56:15] <LordDVG> does beaglebone black need external oscillator to support audio over hdmi
  • [14:56:16] * kbart (~KBart@213.197.143.19) Quit (Remote host closed the connection)
  • [14:56:21] <LordDVG> or is it already assembled?
  • [14:56:46] <m_billybob> LordDVG not 100% positive but mostly sure its an out of the box experience
  • [14:57:26] <LordDVG> does that mean that I need to buy oscillator?
  • [14:57:45] <m_billybob> ive had abbb for around abouts 3-4 months, but never actually *used* hdmi
  • [14:57:57] <m_billybob> that means i think no, you do not need to buy one
  • [14:58:21] <LordDVG> OK, thank you m_billybob
  • [14:59:08] <m_billybob> no problem
  • [15:05:00] * maxinux (maxinux@nizzles.net) Quit (Ping timeout: 260 seconds)
  • [15:06:10] * ant_work (~ant@host54-128-static.10-188-b.business.telecomitalia.it) Quit (Quit: Leaving)
  • [15:06:45] * illum (~illum@dynamic-acs-24-101-9-34.zoominternet.net) Quit (Ping timeout: 248 seconds)
  • [15:07:10] * maxinux (maxinux@nizzles.net) has joined #beagle
  • [15:08:33] * emeb_mac (~ericb@ip72-223-90-58.ph.ph.cox.net) Quit (Quit: emeb_mac)
  • [15:09:28] * mythos (~mythos@unaffiliated/mythos) Quit (Ping timeout: 264 seconds)
  • [15:11:45] * prpplague (~danders@adsl-68-88-75-241.dsl.rcsntx.swbell.net) has joined #beagle
  • [15:16:46] * bkearns (~bkearns@75-101-54-23.dsl.static.sonic.net) Quit (Quit: Leaving.)
  • [15:20:25] * robert-km (d956bc71@gateway/web/freenode/ip.217.86.188.113) Quit (Quit: Page closed)
  • [15:24:26] * octopus_ (b8472b8e@gateway/web/freenode/ip.184.71.43.142) has joined #beagle
  • [15:24:42] <octopus_> hi there, i have recurring dns lookup issues
  • [15:24:49] <octopus_> i wonder if someone can help me?
  • [15:25:14] <octopus_> when i first reboot, i can find servers by name fine
  • [15:25:23] <octopus_> but shortly afterwards name lookups fail
  • [15:25:28] <octopus_> i can still ping by ip
  • [15:25:30] <octopus_> ???
  • [15:26:09] <octopus_> resolve.conf has only one entry for nameserver and it is 127.0.0.1
  • [15:26:24] <octopus_> how is that even a valid dns?
  • [15:27:06] <octopus_> a reboot usually sorts its name lookups but only temporarily
  • [15:31:44] <KotH> of course it's a valid dns server address
  • [15:31:53] <KotH> it's localhost, the machine itself
  • [15:32:05] <KotH> just make sure your dns resolver on the machine is working properly
  • [15:33:06] <lyakh> koenkooi: hi, you worked on cape support, do I see it right, that at the moment no run-time DT patching is available in the kernel mainline?
  • [15:34:49] <octopus_> well i guess the resolver fails after a short time.
  • [15:35:13] <octopus_> can i tell it to use an internet DNS instead?
  • [15:35:32] <octopus_> or how do i fix the resolver
  • [15:35:43] <octopus_> i have the same problem on white and black beaglebones
  • [15:36:04] <KotH> lyakh: koen is AWOL and will not answer any requests until further notice
  • [15:36:17] <bmatusiak_> octopus_, add "8.8.8.8" and "8.8.3.3" to your resolve.conf
  • [15:36:23] <bmatusiak_> lol
  • [15:36:26] <lyakh> KotH: ok, thanks
  • [15:36:28] <bmatusiak_> 8.8.4.4
  • [15:36:28] <KotH> octopus_: i dont know whether you can do it, but it's generally possible
  • [15:36:32] <bmatusiak_> not 3.3
  • [15:36:35] <octopus_> yes, ive tried that, but when i reboot conn manager rewrites the file
  • [15:36:47] <bmatusiak_> disable dhcp
  • [15:36:51] <bmatusiak_> o wait
  • [15:36:53] <bmatusiak_> i know
  • [15:37:10] <bmatusiak_> /etc/dhcp/dhcp_client.conf or something like that
  • [15:37:24] <bmatusiak_> you need to appedn dns in there
  • [15:38:20] <bmatusiak_> dhcp is the culprit for changing the resolve.conf
  • [15:38:27] <octopus_> hmmmmm, no dhcp folder under etc
  • [15:38:37] <bmatusiak_> it may be called something else
  • [15:38:37] <octopus_> and a search for dhcp found nothing
  • [15:38:51] <bmatusiak_> angstrom?
  • [15:39:15] <octopus_> it is angstrom yes
  • [15:41:09] <bmatusiak_> type "whereis dhcp"
  • [15:41:17] <bmatusiak_> does that say anything
  • [15:41:54] <octopus_> it says "dhcp: "
  • [15:42:47] * shaunbak_ (~shaunbake@brick-lane.lbi.co.uk) Quit (Remote host closed the connection)
  • [15:42:51] * bearsh|work (~quassel@189-92.77-83.cust.bluewin.ch) Quit (Ping timeout: 260 seconds)
  • [15:43:31] <bmatusiak_> yea
  • [15:43:54] <bmatusiak_> i know its the dhcp client doing that.. i remember i had same problem...
  • [15:44:13] <bmatusiak_> i no longer use angstrom...
  • [15:44:22] <bmatusiak_> b/c of stuff like that
  • [15:45:56] <octopus_> makes sense
  • [15:52:01] * m_billybob needs some good turkish coffee right about now
  • [15:52:32] * joel_ (~joel@nat/ti/x-yhyeuudbsiygvriw) Quit (Remote host closed the connection)
  • [15:55:54] * josh1 (~josh@67.8.72.102) has joined #beagle
  • [16:00:58] * hatguy (~hatguy@1.38.27.35) has joined #beagle
  • [16:01:25] <av500> +1
  • [16:01:35] <bmatusiak_> lol
  • [16:02:09] <bmatusiak_> more like +1 for every problem i had :P so like +30
  • [16:02:56] <bmatusiak_> anyways i found a dhcp client file example....
  • [16:03:00] <bmatusiak_> http://nesl.ee.ucla.edu/fw/han/old_machine_backup/overo-oe/tmp/work/armv7a-angstrom-linux-gnueabi/dhcp-3.1.2p1-r11.0/dhclient.conf
  • [16:04:32] <bmatusiak_> prepend domain-name-servers DNSIP; is where you add your custom dns
  • [16:07:27] * Ceriand (~ceriand@unaffiliated/ceriand) has joined #beagle
  • [16:08:04] <bmatusiak_> .... also another trick is to install bind9. and tell bind9 to fwd incoming dns quieries to google pub dns ips
  • [16:12:05] <bmatusiak_> im so ready to get my enc28j60 in the mail
  • [16:13:49] <octopus_> okay thanks @bmatusiak
  • [16:13:53] <octopus_> i also found this http://www.gigamegablog.com/2012/02/06/beaglebone-linux-101-assigning-a-static-ip-address-with-connman/
  • [16:14:03] <octopus_> that tells how to configure connman
  • [16:15:04] * natsurou (~natsurou@201.230.214.215) Quit (Ping timeout: 260 seconds)
  • [16:15:09] <octopus_> but it fails with a stack trace :(
  • [16:15:36] * emeb (~ericb@ip72-223-90-58.ph.ph.cox.net) has joined #beagle
  • [16:16:03] * nash__ (2e26b1e4@gateway/web/freenode/ip.46.38.177.228) Quit (Ping timeout: 250 seconds)
  • [16:16:25] <bmatusiak_> octopus_, here another link that can help
  • [16:16:25] <bmatusiak_> http://www.gigamegablog.com/2012/01/29/beaglebone-linux-101-configuring-angstrom-linux/
  • [16:16:33] <octopus_> might try the bind solution
  • [16:17:12] * lyakh (~lyakh@dslb-084-061-108-099.pools.arcor-ip.net) Quit (Quit: thanks, bye)
  • [16:17:18] <octopus_> yeah i saw that one too and there is no /etc/network folder :/
  • [16:17:19] <octopus_> sheesh
  • [16:17:25] <bmatusiak_> lol
  • [16:17:50] <bmatusiak_> why not try a ubuntu image?
  • [16:17:50] * rob_w (~rob@unaffiliated/rob-w/x-1112029) has joined #beagle
  • [16:18:02] <octopus_> yeah thats a possibility too
  • [16:18:26] <bmatusiak_> theres more support for ubuntu then angstrom....
  • [16:18:42] <bmatusiak_> make me wonder why is angstrom pre-installed on beaglebones
  • [16:18:42] * mythos (~mythos@unaffiliated/mythos) has joined #beagle
  • [16:19:24] * riotz (riotz@gateway/shell/sh3lls.net/x-geqkvqnobiqwfegi) Quit (Remote host closed the connection)
  • [16:19:57] <bmatusiak_> it should come blank emmc and with a micro sd card like the BBW
  • [16:20:00] * riotz (riotz@gateway/shell/sh3lls.net/x-yhwcttlrsimyqgmt) has joined #beagle
  • [16:20:06] <bmatusiak_> so the user can choose what distro to use
  • [16:20:09] <LetoThe2nd> bmatusiak_: certainly not.
  • [16:20:42] <bmatusiak_> LetoThe2nd, what part?
  • [16:20:50] * bkearns (~bkearns@216-75-239-130.static.wiline.com) has joined #beagle
  • [16:20:54] <LetoThe2nd> bmatusiak_: we've seen where that leads on the panda, and its waaaaaaay worse than an angstrom preintalled emmc
  • [16:21:18] <bmatusiak_> lol
  • [16:21:24] <octopus_> well ive done quite a bit with this angstrom distrib
  • [16:21:33] <LetoThe2nd> bmatusiak_: just because most users are too stupid... erm lame... erm... little caring about getting their stuff set up correctly.
  • [16:21:35] <nash> anyone who knows where to find the beagleboard black enclosure dimensions?
  • [16:21:36] <octopus_> just probs with dns
  • [16:22:14] <LetoThe2nd> bmatusiak_: also, there ubuntu was the distro chosen for official support, and it did not work out too well.
  • [16:22:54] <bmatusiak_> nash, idk if this helps http://www.logicsupply.com/products/bb100
  • [16:23:03] * Wipster (~Wip@host81-137-80-202.in-addr.btopenworld.com) Quit (Ping timeout: 245 seconds)
  • [16:23:16] <av500> you dont need a box to be cool
  • [16:23:32] <bmatusiak_> i need a box to keep my cat out of my wires
  • [16:23:42] <nash> and my beer out of the bb
  • [16:23:45] <LetoThe2nd> bmatusiak_: so, from about 3 years of continuous support for the ti community board, i can guarantee you that preinstalled angstrom is the thing that absolutely works best so far.
  • [16:23:49] <bmatusiak_> lol nash
  • [16:24:31] <bmatusiak_> LetoThe2nd, i get where you are coming from..
  • [16:24:53] <bmatusiak_> nash, that help?
  • [16:26:53] * fraz_ (~fraz@12.233.153.4) has joined #beagle
  • [16:27:17] * fraz_ (~fraz@12.233.153.4) has left #beagle
  • [16:28:37] * intern_ (4b91f021@gateway/web/freenode/ip.75.145.240.33) Quit (Ping timeout: 250 seconds)
  • [16:28:42] <bmatusiak_> pin P9_9 PWR_BUT... is that a + or a -
  • [16:28:46] * octopus_ (b8472b8e@gateway/web/freenode/ip.184.71.43.142) Quit (Quit: Page closed)
  • [16:30:54] <nash> need 3d pdf adobe viewer bmatusiak_ xD
  • [16:31:07] <bmatusiak_> lol
  • [16:31:25] <bmatusiak_> "2.4" x 0.82" x 3.54" ^_^
  • [16:33:53] * jackmitchell (~Thunderbi@cbnluk-gw0.cambridgebroadband.com) Quit (Ping timeout: 245 seconds)
  • [16:34:11] <bmatusiak_> i like the lgx bb box because of the telescoping lid
  • [16:34:37] <nash> that was not what i meant :P
  • [16:34:47] <nash> need the dimensions of the connectors etc
  • [16:34:56] <nash> holes blablal
  • [16:34:56] <nash> :P
  • [16:35:39] * zeroem (~Darrell_H@nat-225.fw1.la.vclk.net) has joined #beagle
  • [16:35:53] * flo_lap (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [16:37:53] <bmatusiak_> dont feel like breaking out the Micrometer
  • [16:37:57] <bmatusiak_> ^_^
  • [16:39:00] * NulL (~bleh1@178.16.2.142) has joined #beagle
  • [16:39:23] * NulL is now known as Guest6126
  • [16:39:33] <nash> ok good look, gimmi the url when you're done ;x
  • [16:39:40] <nash> luck even ;/
  • [16:40:05] * Desert (~quassel@192.100.196.72) Quit (Remote host closed the connection)
  • [16:40:14] * Desert (~quassel@192.100.196.72) has joined #beagle
  • [16:40:30] * uv (~uv@94-21-122-212.pool.digikabel.hu) has joined #beagle
  • [16:41:20] <bmatusiak_> nash, BBB_SRM.pdf page 112
  • [16:41:40] * djerome (~djerome@ip68-98-228-41.ph.ph.cox.net) has joined #beaglebone
  • [16:45:09] <bmatusiak_> i wish the emmc was 4gb
  • [16:46:08] <bmatusiak_> Abracadabra
  • [16:46:14] <agmlego> Just change the chip out.
  • [16:46:56] * zeroem (~Darrell_H@nat-225.fw1.la.vclk.net) Quit (Quit: Leaving.)
  • [16:47:11] <bmatusiak_> lol then it wouldnt be a offical beaglebone
  • [16:47:43] <bmatusiak_> it it would leave me out of the support loop
  • [16:48:48] <agmlego> Only if you have issues with the eMMC.
  • [16:49:35] <bmatusiak_> with my luck.... that would happen
  • [16:50:08] * firemanxbr (~firemanxb@187.107.49.183) Quit (Ping timeout: 245 seconds)
  • [16:50:27] <nash> :D
  • [16:50:41] <agmlego> Just change your luck module out.
  • [16:50:49] <bmatusiak_> haha
  • [16:50:52] * firemanxbr (~firemanxb@187.107.49.183) has joined #beagle
  • [16:51:01] <bmatusiak_> my Luck-Cape
  • [16:51:52] <bmatusiak_> i just got ordered one from adafruit... (luck-cape/module)
  • [16:52:17] <bmatusiak_> next thing i know. im going to get struck by lightning
  • [17:01:20] * zeroem (~Darrell_H@nat-225.fw1.la.vclk.net) has joined #beagle
  • [17:01:54] <bmatusiak_> pin P9_9 PWR_BUT = 5v+
  • [17:10:52] * Zaite (5b870ccd@gateway/web/freenode/ip.91.135.12.205) has joined #beagle
  • [17:12:08] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [17:12:27] <Zaite> Hello. I've compiled a replacement V4L kernel module on my Beaglebone Black. When I try to load the module I'm getting "ERROR: could not insert 'tm6000': Exec format error". I've checked the file format and it's the same as the original module. Any ideas? :/
  • [17:13:17] * LordDVG (~LordDVG@unaffiliated/lorddvg) Quit (Quit: Leaving)
  • [17:14:01] * LordDVG (~LordDVG@unaffiliated/lorddvg) has joined #beagle
  • [17:15:09] * dwery (~dwery@nslu2-linux/dwery) Quit (Remote host closed the connection)
  • [17:21:54] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Remote host closed the connection)
  • [17:22:21] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [17:26:48] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Ping timeout: 245 seconds)
  • [17:28:24] * flo_lap (~fuchs@Maemo/community/contributor/florian) Quit (Ping timeout: 276 seconds)
  • [17:29:11] * Stanto (Stanto@2600:3c03::f03c:91ff:fe70:1e8d) Quit (Quit: quit!)
  • [17:29:39] * Stanto (Stanto@2600:3c03::f03c:91ff:fe70:1e8d) has joined #beagle
  • [17:29:43] * Zaite (5b870ccd@gateway/web/freenode/ip.91.135.12.205) Quit (Ping timeout: 250 seconds)
  • [17:31:27] * jackmitch|home (~Thunderbi@cpc22-cmbg15-2-0-cust21.5-4.cable.virginmedia.com) has joined #beagle
  • [17:34:27] * german (250f409d@gateway/web/freenode/ip.37.15.64.157) has joined #beagle
  • [17:34:44] <german> hello
  • [17:35:29] <german> i want to select a hardware platform in order to use android
  • [17:37:37] <german> I should use diferent peripherals like: lcd 4.3 + touch(capacitive), some usb peripherals with linux support drivers and wifi/gsm communications modules
  • [17:39:10] <german> could you confirm that beagle bone hardware platform it's a good selection?
  • [17:39:11] * NishanthMenon (~nmenon@nat/ti/x-lgvcqwlmozmmjejb) has joined #beagle
  • [17:39:16] <german> thank you
  • [17:48:34] * SyNko (~SyNko@81-174-50-150.v4.ngi.it) has joined #beagle
  • [17:51:19] <m_billybob> german, the beaglebone black is an excellent platform, although I do not know if anyone could answer your questions except for you. ~$45 . . . really isnt much for a test though. Also I do not know about the 4.3" LCD but chipsee seems to be doing fairly well with their 7" LCD. I have no personal hands on with it, but have seen some videos on youtube
  • [17:51:31] * djlewis (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
  • [17:52:13] <CareBear\> german : you described *any* android system with an lcd interface and a usb host
  • [17:52:40] <CareBear\> german : the hardware you buy doesn't really matter - if you do not already know the software environment you will spend many months if not years learning about it
  • [17:53:00] <m_billybob> i can atest to that
  • [17:53:02] <CareBear\> german : and by the time you have a good understanding of the software, whatever hardware you started out with has gone obsolete
  • [17:53:37] <m_billybob> ^^^ and in that context personally i think the BBB would be a great place to start
  • [17:53:58] <m_billybob> I mean really $45 . . . thats a darned good price
  • [17:56:22] * joel_ (~joel@cpe-76-185-12-202.tx.res.rr.com) has joined #beagle
  • [17:57:14] * Vlad_on_the_road (~Vlad_on_t@ip-66.net-82-216-1.versailles2.rev.numericable.fr) has joined #beagle
  • [17:59:12] <german> thanks m_billybob and CareBear
  • [18:03:02] * rotorgeek (~quassel@71-33-154-232.hlrn.qwest.net) has joined #beagle
  • [18:06:08] * sedtx (~sedtx@167.220.26.14) has joined #beagle
  • [18:09:11] * german (250f409d@gateway/web/freenode/ip.37.15.64.157) Quit (Quit: Page closed)
  • [18:11:35] * mag (~mgreer@ip68-3-92-114.ph.ph.cox.net) Quit (Quit: Terminated with extreme prejudice - dircproxy 1.0.5)
  • [18:11:45] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [18:12:04] * jackmitch|home (~Thunderbi@cpc22-cmbg15-2-0-cust21.5-4.cable.virginmedia.com) Quit (Quit: jackmitch|home)
  • [18:15:09] * tema (~tema@178-16-155-142.obit.ru) has joined #beagle
  • [18:17:10] * mag (~mgreer@ip68-3-92-114.ph.ph.cox.net) has joined #beagle
  • [18:20:03] * suboptimus (~suboptimu@wsip-184-179-104-130.oc.oc.cox.net) has joined #beagle
  • [18:21:40] * gprera (c831af23@gateway/web/freenode/ip.200.49.175.35) has joined #beagle
  • [18:23:18] <gprera> hello, I have a problem. I accidentally erase the memory of the beaglebone, the /media/BEAGLEBONE
  • [18:23:44] <gprera> and reboot the board.
  • [18:24:09] <gprera> and I can't connect with him, by 192.168.7.2 and in my pc said me that is unknow device
  • [18:24:21] <LetoThe2nd> reflash it
  • [18:24:33] <vvu|Log> yep reflash the BBB
  • [18:24:47] <LetoThe2nd> http://circuitco.com/support/index.php?title=Updating_The_Software
  • [18:25:16] * falstaff (~quassel@62-12-206-094.pool.cyberlink.ch) has joined #beaglebone
  • [18:25:16] * falstaff (~quassel@62-12-206-094.pool.cyberlink.ch) has joined #beagle
  • [18:27:30] * falstaff_ (~quassel@62-12-212-228.pool.cyberlink.ch) Quit (Ping timeout: 245 seconds)
  • [18:28:39] <gprera> ok, thanks
  • [18:28:49] <gprera> i will try
  • [18:30:28] * Gaston|Home (~jonma@ua-83-227-239-139.cust.bredbandsbolaget.se) Quit (Ping timeout: 264 seconds)
  • [18:32:09] * daniel_ohh (~danielohh@dhcp-196-174.ece.utexas.edu) has joined #beagle
  • [18:34:10] * zeroem (~Darrell_H@nat-225.fw1.la.vclk.net) Quit (Quit: Leaving.)
  • [18:34:28] <daniel_ohh> Has anybody got hostapd to work on the BBB with the Edimax EW7811 adapter?
  • [18:37:14] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Remote host closed the connection)
  • [18:37:18] <KotH> daniel_ohh: have you checked whether the linux driver of said wifi adapter supports ap mode?
  • [18:37:41] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [18:37:51] <KotH> daniel_ohh: not all hardware supports ap mode, and of those who support it, not all drivers have the functionality
  • [18:37:55] * flo_lap (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [18:38:00] * hatguy (~hatguy@1.38.27.35) Quit (Quit: Bye.)
  • [18:40:09] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Disconnected by services)
  • [18:40:12] * flo_lap is now known as florian
  • [18:40:40] * florian_kc (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [18:42:19] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Ping timeout: 260 seconds)
  • [18:42:52] * zeroem (~Darrell_H@nat-225.fw1.la.vclk.net) has joined #beagle
  • [18:48:17] * pkh (~pkh@124.186.109.166) has joined #beagle
  • [18:49:28] * daniel_ohh_ (~danielohh@nat-128-62-28-2.public.utexas.edu) has joined #beagle
  • [18:51:10] * daniel_ohh (~danielohh@dhcp-196-174.ece.utexas.edu) Quit (Ping timeout: 246 seconds)
  • [18:52:52] * dwery (~dwery@nslu2-linux/dwery) has joined #beagle
  • [18:57:15] * bbfan (6b015eec@gateway/web/freenode/ip.107.1.94.236) has joined #beagle
  • [18:59:14] * uv (~uv@94-21-122-212.pool.digikabel.hu) Quit (Remote host closed the connection)
  • [19:00:13] * VirG (~VirGin@63.110.51.11) Quit (Quit: Leaving.)
  • [19:01:53] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [19:03:24] * SyNko (~SyNko@81-174-50-150.v4.ngi.it) Quit (Quit: ChatZilla 0.9.90.1 [Firefox 24.0/20130910160258])
  • [19:03:44] * SyNko (~SyNko@81-174-50-150.v4.ngi.it) has joined #beagle
  • [19:03:59] * bbfan (6b015eec@gateway/web/freenode/ip.107.1.94.236) Quit (Quit: Page closed)
  • [19:09:26] * stamina (~stamina@221-163-128-083.dynamic.caiway.nl) Quit (Ping timeout: 240 seconds)
  • [19:10:07] * old-papa-work (~wl@65-117-102-210.dia.static.qwest.net) Quit ()
  • [19:10:12] * Mode-M (~Null@gateway/tor-sasl/mode-m) has joined #beagle
  • [19:13:28] * rotorgeek (~quassel@71-33-154-232.hlrn.qwest.net) Quit (Remote host closed the connection)
  • [19:18:46] * daniel_ohh_ (~danielohh@nat-128-62-28-2.public.utexas.edu) Quit (Ping timeout: 245 seconds)
  • [19:21:12] * maxinux (maxinux@nizzles.net) Quit (Ping timeout: 260 seconds)
  • [19:23:57] * maxinux (maxinux@nizzles.net) has joined #beagle
  • [19:25:19] * LordDVG (~LordDVG@unaffiliated/lorddvg) Quit (Quit: Leaving)
  • [19:25:30] * hno (~hno@squid/developer/hno) Quit (Excess Flood)
  • [19:25:37] * hno (~hno@squid/developer/hno) has joined #beagle
  • [19:26:10] * eFfeM (~frans@c73189.upc-c.chello.nl) has joined #beagle
  • [19:34:15] * krajo1 (~krajo1@ip4-83-240-125-22.cust.nbox.cz) has joined #beagle
  • [19:34:28] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Remote host closed the connection)
  • [19:34:55] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [19:35:58] * Shadyman (~matthew@unaffiliated/shadyman) has joined #beagle
  • [19:39:02] * hitoribocchi (~Stove@178-116-204-28.access.telenet.be) has joined #beagle
  • [19:39:43] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Ping timeout: 260 seconds)
  • [19:40:21] <hitoribocchi> Does the beagle have as much flash corruption problems as the raspberry pi?
  • [19:41:19] <djlewis> i thought most flash corruption was user caused
  • [19:41:48] <vvu|Log> hitoribocchi: the kernel flash corruption problem on pi? i know that shit and it`s freaking bad
  • [19:42:09] <vvu|Log> the BBB works like charm 3 months with the same sw on it
  • [19:42:20] * ka6sox is now known as zz_ka6sox
  • [19:43:06] <mru> what flash?
  • [19:43:17] <mru> do you mean sd card?
  • [19:44:26] * stamina (~stamina@221-163-128-083.dynamic.caiway.nl) has joined #beaglebone
  • [19:45:23] <hitoribocchi> sorry phone
  • [19:45:25] <hitoribocchi> sec
  • [19:46:58] <hitoribocchi> yeah well, it's just that it's the second time my SD image is ruined due to me powering off the raspberry pi
  • [19:47:21] <hitoribocchi> The beagle has what, 2GB onboard flash and a nano sd card slot?
  • [19:47:39] <hitoribocchi> Would it be equally suseptible to such corruption by powering it off?
  • [19:47:59] <hitoribocchi> susceptible*
  • [19:48:27] <hitoribocchi> yes it's BAD, vvu|Log
  • [19:48:31] <hitoribocchi> thanks for confirming
  • [19:48:41] <hitoribocchi> second time in 3 days
  • [19:49:03] <hitoribocchi> But I did short out the 5V a couple of times... BUT STILL
  • [19:50:32] * daniel_ohh (~danielohh@66-90-152-11.dyn.grandenetworks.net) has joined #beagle
  • [19:51:14] * felipealmeida (~user@177.40.164.115) has joined #beagleboard
  • [19:51:42] * felipealmeida (~user@177.40.164.115) has joined #beagle
  • [19:52:42] * zz_ka6sox is now known as ka6sox
  • [19:53:31] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [19:54:24] * old-papa-work (~wl@65-117-102-210.dia.static.qwest.net) has joined #beagle
  • [19:54:24] * old-papa-work (~wl@65-117-102-210.dia.static.qwest.net) has joined #beaglebone
  • [19:54:55] * old-papa-work (~wl@65-117-102-210.dia.static.qwest.net) Quit (Client Quit)
  • [19:55:45] * old-papa-work (~wl@65-117-102-210.dia.static.qwest.net) has joined #beagle
  • [19:55:45] * old-papa-work (~wl@65-117-102-210.dia.static.qwest.net) has joined #beaglebone
  • [19:57:41] * isaacbw (~ubuntu@ec2-54-235-250-85.compute-1.amazonaws.com) has joined #beaglebone
  • [19:57:46] * isaacbw (~ubuntu@ec2-54-235-250-85.compute-1.amazonaws.com) has joined #beagleboard
  • [19:57:49] * isaacbw (~ubuntu@ec2-54-235-250-85.compute-1.amazonaws.com) has left #beagleboard
  • [19:58:48] * louiz920 (~a0272879@nat/ti/x-dwtjyjfgudfbblfz) has joined #beagle
  • [19:58:49] * isaacbw (~ubuntu@ec2-54-235-250-85.compute-1.amazonaws.com) has joined #beagle
  • [19:58:52] * isaacbw (~ubuntu@ec2-54-235-250-85.compute-1.amazonaws.com) has left #beaglebone
  • [19:59:13] <isaacbw> is it possible that my usb wifi adapter is causing a kernel panic on the beaglebone?
  • [20:00:11] <isaacbw> here's what's going on after a little while when booting with the adapter installed: http://pastie.org/8349744
  • [20:02:29] <isaacbw> oh, it may be because I'm only powering the bb over usb?
  • [20:02:44] <thurgood> isaacbw: depending on how you're powering everything, yes
  • [20:03:31] <isaacbw> I'm powering it from my desktop's usb port
  • [20:03:37] <isaacbw> so that's probably what's going on
  • [20:04:40] <thurgood> yeah, most likely
  • [20:06:29] * CalcMan (~Calc@pool-108-51-16-106.washdc.fios.verizon.net) has joined #beagle
  • [20:07:27] * rotorgeek (~quassel@71-33-154-232.hlrn.qwest.net) has joined #beagle
  • [20:10:04] * Calc (~Calc@pool-108-51-16-106.washdc.fios.verizon.net) Quit (Ping timeout: 256 seconds)
  • [20:10:12] * darknighte is now known as darknighte_znc
  • [20:13:53] * Guest6126 (~bleh1@178.16.2.142) Quit (Ping timeout: 245 seconds)
  • [20:26:02] * suboptimus (~suboptimu@wsip-184-179-104-130.oc.oc.cox.net) Quit (Quit: suboptimus)
  • [20:31:16] * firemanxbr (~firemanxb@187.107.49.183) Quit (Quit: Leaving)
  • [20:31:36] * firemanxbr (~firemanxb@187.107.49.183) has joined #beagle
  • [20:32:10] * rsalveti (~rsalveti@unaffiliated/rsalveti) Quit (Ping timeout: 261 seconds)
  • [20:32:27] * eFfeM (~frans@c73189.upc-c.chello.nl) Quit (Quit: Leaving.)
  • [20:34:09] * Mode-M (~Null@gateway/tor-sasl/mode-m) Quit (Ping timeout: 240 seconds)
  • [20:38:08] * rsalveti (~rsalveti@unaffiliated/rsalveti) has joined #beagle
  • [20:40:22] * _SY_ (HydraIRC@acquire.demon.co.uk) has joined #beagle
  • [20:40:44] <_SY_> hello
  • [20:42:40] * m_billybob (~billybob@wulfman.com) has left #beagle
  • [20:44:06] * Mode-M (~Null@gateway/tor-sasl/mode-m) has joined #beagle
  • [20:44:15] * rob_w (~rob@unaffiliated/rob-w/x-1112029) Quit (Read error: Connection reset by peer)
  • [20:46:32] * vagrantc (~vagrant@freegeek/vagrantc) has joined #beagle
  • [20:46:42] * _SY_ (HydraIRC@acquire.demon.co.uk) Quit (Quit: HydraIRC -> http://www.hydrairc.com <- Organize your IRC)
  • [20:47:24] * SysEngr (~SysEngr@uawifi-nat-210-111.arizona.edu) has joined #beagle
  • [20:49:15] * SyNko (~SyNko@81-174-50-150.v4.ngi.it) Quit (Remote host closed the connection)
  • [20:50:51] * sedtx (~sedtx@167.220.26.14) Quit (Ping timeout: 245 seconds)
  • [20:50:52] * Vlad_on_the_road (~Vlad_on_t@ip-66.net-82-216-1.versailles2.rev.numericable.fr) Quit (Ping timeout: 264 seconds)
  • [20:53:39] * tema (~tema@178-16-155-142.obit.ru) Quit (Ping timeout: 251 seconds)
  • [20:58:44] * maxinux (maxinux@nizzles.net) Quit (Ping timeout: 260 seconds)
  • [21:01:09] * maxinux (maxinux@2001:1868:208::ea7:beef) has joined #beagle
  • [21:03:25] * shaunbaker (~shaunbake@97e69e6b.skybroadband.com) has joined #beagle
  • [21:11:01] * pkh (~pkh@124.186.109.166) Quit (Ping timeout: 248 seconds)
  • [21:12:45] * darknighte_znc is now known as darknighte
  • [21:13:12] * maxinux (maxinux@2001:1868:208::ea7:beef) Quit (Ping timeout: 260 seconds)
  • [21:14:38] * Mode-M (~Null@gateway/tor-sasl/mode-m) Quit (Remote host closed the connection)
  • [21:15:04] * maxinux (maxinux@nizzles.net) has joined #beagle
  • [21:15:33] * shaunbaker (~shaunbake@97e69e6b.skybroadband.com) Quit (Remote host closed the connection)
  • [21:15:59] * shaunbaker (~shaunbake@195.69.155.61) has joined #beagle
  • [21:19:23] * suboptimus (~suboptimu@wsip-184-179-104-130.oc.oc.cox.net) has joined #beagle
  • [21:21:44] * Jimbo (5e1e35b5@gateway/web/freenode/ip.94.30.53.181) has joined #beagle
  • [21:23:08] * Jimbo (5e1e35b5@gateway/web/freenode/ip.94.30.53.181) has left #beagle
  • [21:25:57] * fabo (~fabo@linaro/fabo) has joined #beagle
  • [21:29:03] * maxinux (maxinux@nizzles.net) Quit (Ping timeout: 260 seconds)
  • [21:31:05] * maxinux (maxinux@nizzles.net) has joined #beagle
  • [21:31:11] * dys (~user@2a01:1e8:e100:8296:21a:4dff:fe4e:273a) Quit (Remote host closed the connection)
  • [21:31:14] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Remote host closed the connection)
  • [21:31:41] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [21:35:46] * ezequielgarcia (~elezegarc@190.2.109.79) Quit (Quit: Leaving)
  • [21:36:01] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Ping timeout: 246 seconds)
  • [21:37:15] * SysEngr_ (~SysEngr@uawifi-nat-210-81.arizona.edu) has joined #beagle
  • [21:39:39] * SysEngr (~SysEngr@uawifi-nat-210-111.arizona.edu) Quit (Ping timeout: 248 seconds)
  • [21:46:27] * hitoribocchi (~Stove@178-116-204-28.access.telenet.be) Quit (Ping timeout: 276 seconds)
  • [21:47:24] * Guest30772 (~yak@198-84-130-148.cpe.teksavvy.com) Quit (Ping timeout: 268 seconds)
  • [21:51:04] * awyea (ad162a27@gateway/web/freenode/ip.173.22.42.39) has joined #beagle
  • [21:51:19] * NishanthMenon (~nmenon@nat/ti/x-lgvcqwlmozmmjejb) Quit (Quit: Bank error in my favor. Gone to collect $200.)
  • [21:51:59] * metalinjection (~metalinje@kssl-4db0c57e.pool.mediaWays.net) has joined #beagle
  • [21:52:04] <metalinjection> hello
  • [21:52:43] <metalinjection> sry to bother but I just got a BBB and installed ubuntu on it. However I can't find anywhere in the web the login password
  • [21:53:03] <metalinjection> So far I found out the user is ubuntu but what is the pw
  • [21:53:17] <metalinjection> anyone? thanks in advance
  • [21:55:35] * dgerlach (~dave@nat/ti/x-uvairlqssqekgfgo) Quit (Quit: Leaving.)
  • [21:55:51] <daniel_ohh> try temppwd
  • [21:56:53] <metalinjection> that's it! cheers mate
  • [21:59:04] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [21:59:24] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) has joined #beagle
  • [21:59:26] * krajo1 (~krajo1@ip4-83-240-125-22.cust.nbox.cz) Quit (Quit: Konversation terminated!)
  • [22:03:19] * eikeon (~eikeon@140.147.245.140) Quit (Quit: eikeon)
  • [22:03:26] * m_billybob (~billybob@wulfman.com) has joined #beagle
  • [22:08:21] * awyea (ad162a27@gateway/web/freenode/ip.173.22.42.39) Quit (Ping timeout: 250 seconds)
  • [22:09:21] * vagrantc (~vagrant@freegeek/vagrantc) Quit (Quit: leaving)
  • [22:11:52] * c10ud (~c10ud@emesene/dictator/c10ud) Quit (Remote host closed the connection)
  • [22:12:12] * [yAK] (~yak@198-84-130-148.cpe.teksavvy.com) has joined #beagle
  • [22:12:35] * [yAK] is now known as Guest20869
  • [22:13:24] * maxinux (maxinux@nizzles.net) Quit (Ping timeout: 260 seconds)
  • [22:15:39] * maxinux (maxinux@nizzles.net) has joined #beagle
  • [22:16:53] * honestly (~luke@unaffiliated/luketheduke) Quit (Quit: reboot imminent)
  • [22:17:02] * SysEngr_ (~SysEngr@uawifi-nat-210-81.arizona.edu) Quit (Ping timeout: 264 seconds)
  • [22:24:24] * firemanxbr (~firemanxb@187.107.49.183) Quit (Excess Flood)
  • [22:25:14] * firemanxbr (~firemanxb@187.107.49.183) has joined #beagle
  • [22:30:17] * djlewis (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Quit: Leaving.)
  • [22:30:35] * SysEngr (~SysEngr@uawifi-nat-210-109.arizona.edu) has joined #beagle
  • [22:35:07] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) Quit (Ping timeout: 248 seconds)
  • [22:42:31] <metalinjection> i am off - thx for help @daniel_ohh .. bye bye
  • [22:42:45] * metalinjection (~metalinje@kssl-4db0c57e.pool.mediaWays.net) has left #beagle
  • [22:45:17] * shoragan (~jlu@debian/developer/shoragan) Quit (Read error: Connection timed out)
  • [22:45:59] * shoragan (~jlu@debian/developer/shoragan) has joined #beagle
  • [22:46:11] * eikeon (~eikeon@c-98-218-6-128.hsd1.dc.comcast.net) has joined #beagle
  • [22:56:36] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Remote host closed the connection)
  • [22:57:05] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [22:58:08] * thurgood (~thurgood@64.132.24.36) Quit (Remote host closed the connection)
  • [23:00:40] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) Quit (Read error: No route to host)
  • [23:00:53] * mrpackethead (~mrpacketh@147.200.109.203.static.cust.vf.net.nz) has joined #beagle
  • [23:01:07] * dgerlach (~dave@nat/ti/x-hwxjesfjnmainzzm) has joined #beagle
  • [23:02:05] * gprera (c831af23@gateway/web/freenode/ip.200.49.175.35) Quit (Ping timeout: 250 seconds)
  • [23:10:32] * eikeon (~eikeon@c-98-218-6-128.hsd1.dc.comcast.net) Quit (Quit: eikeon)
  • [23:12:21] * Stanto (Stanto@2600:3c03::f03c:91ff:fe70:1e8d) Quit (Quit: quit!)
  • [23:12:40] * Stanto (Stanto@2600:3c03::f03c:91ff:fe70:1e8d) has joined #beagle
  • [23:17:32] * thurgood (~thurgood@cpe-70-113-204-247.austin.res.rr.com) has joined #beagle
  • [23:20:52] * darknighte is now known as darknighte_znc
  • [23:30:27] * sakoman1 (~steve@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) Quit (Ping timeout: 276 seconds)
  • [23:30:49] * biot (~bert@2a01:7b8:2006:ea81::fce2) Quit (Ping timeout: 246 seconds)
  • [23:31:02] * biot (~bert@2a01:7b8:2006:ea81::fce2) has joined #beagle
  • [23:34:11] * daniel_ohh (~danielohh@66-90-152-11.dyn.grandenetworks.net) Quit (Ping timeout: 245 seconds)
  • [23:35:20] * dj_pi (~dj@c-107-5-25-243.hsd1.mi.comcast.net) has joined #beagle
  • [23:39:58] * pkh (~pkh@124.186.109.166) has joined #beagle
  • [23:44:39] * daniel_ohh (~danielohh@66-90-152-11.dyn.grandenetworks.net) has joined #beagle
  • [23:52:06] * daniel_ohh (~danielohh@66-90-152-11.dyn.grandenetworks.net) Quit (Ping timeout: 245 seconds)
  • [23:54:16] * daniel_ohh (~danielohh@66-90-152-11.dyn.grandenetworks.net) has joined #beagle
  • [23:56:29] <daniel_ohh> Any suggestions on a USB WiFi dongle that will play nice with hostapd? I have the Edimax ew7811 dongle working with WiFi (RTL8192CU chipset) but can't get hostapd to work.
  • [23:57:15] <daniel_ohh> I read that Atheros chipsets work better but I don't have a huge budget for trail and error buying different adapters.
  • [23:57:24] * sakoman (~steve@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) has joined #beagle
  • [23:58:14] * SysEngr (~SysEngr@uawifi-nat-210-109.arizona.edu) Quit (Remote host closed the connection)
  • [23:59:00] * bkearns (~bkearns@216-75-239-130.static.wiline.com) Quit (Quit: Leaving.)