• [00:18:18] * pbansal (~PBansal@nat/ti/x-wpavhuauadhbryom) Quit (Ping timeout: 258 seconds)
  • [00:20:14] * Hoolxi (~Openfree@58.37.75.253) Quit (Ping timeout: 244 seconds)
  • [00:21:56] * djlewis (~djlewis@75.15.65.156) has joined #beagle
  • [00:28:40] * zuh (d9921dab05@humboldt.pingu.fi) Quit (Read error: Operation timed out)
  • [00:37:20] * thurbad (~natesewel@cpe-70-124-80-154.austin.res.rr.com) has joined #beagle
  • [00:40:54] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [00:43:35] * DieMumie1 (~DieMumiee@p3E9C2641.dip.t-dialin.net) has joined #beagleboard
  • [00:43:35] * DieMumie1 (~DieMumiee@p3E9C2641.dip.t-dialin.net) has joined #beagle
  • [00:43:43] * zuh (6bb0501c3d@humboldt.pingu.fi) has joined #beagle
  • [00:46:54] * DieMumiee (~DieMumiee@p4FEEAC76.dip.t-dialin.net) Quit (Ping timeout: 255 seconds)
  • [01:07:54] * phantoxe (~destroy@a95-92-86-197.cpe.netcabo.pt) Quit ()
  • [01:28:52] * emeb_mac (~ericb@ip72-223-86-178.ph.ph.cox.net) has joined #beagle
  • [01:58:58] * raster (raster@enlightenment/developer/raster) has joined #beagle
  • [02:03:25] * GPSFan (~kenm@64.92.145.112) Quit (Ping timeout: 240 seconds)
  • [02:03:56] * emeb (~ericb@ip72-223-86-178.ph.ph.cox.net) Quit (Quit: Leaving.)
  • [02:06:46] * signal11 (esteban@gnv.quaddro.net) has joined #beagle
  • [02:10:48] * mikecsh (~mikecsh@113.28.74.33) has joined #beagle
  • [02:22:56] * thweber_ (~thomas@ppp-188-174-84-195.dynamic.mnet-online.de) has joined #beagle
  • [02:26:20] * thweber (~thomas@ppp-93-104-191-44.dynamic.mnet-online.de) Quit (Ping timeout: 260 seconds)
  • [02:41:14] * peabody124 (~peabody12@128.249.96.21) Quit (Quit: peabody124)
  • [02:49:49] * housel (~user@mccarthy.opendylan.org) Quit (Excess Flood)
  • [02:50:10] * housel (~user@mccarthy.opendylan.org) has joined #beagle
  • [02:59:35] * koen (~koen@ip545070eb.adsl-surfen.hetnet.nl) Quit (Ping timeout: 260 seconds)
  • [03:00:57] * peabody124 (~peabody12@108-205-218-4.lightspeed.hstntx.sbcglobal.net) has joined #beagle
  • [03:13:18] * jkridner (~jkridner@pdpc/supporter/active/jkridner) Quit (Remote host closed the connection)
  • [03:36:29] * prpplague (~prpplague@ppp-70-242-126-204.dsl.rcsntx.swbell.net) Quit (Ping timeout: 258 seconds)
  • [03:50:24] * prpplague (~prpplague@ppp-70-242-126-204.dsl.rcsntx.swbell.net) has joined #beagle
  • [04:04:28] * djlewis (~djlewis@75.15.65.156) Quit (Ping timeout: 244 seconds)
  • [04:08:54] * sundar (~quassel@110.234.156.82) has joined #beagleboard
  • [04:09:26] * sundar (~quassel@110.234.156.82) has joined #beagle
  • [04:09:40] * sundar (~quassel@110.234.156.82) Quit (Quit: http://quassel-irc.org - Chat comfortably. Anywhere.)
  • [04:10:04] * sundar (~quassel@110.234.156.82) has joined #beagle
  • [04:10:04] * sundar (~quassel@110.234.156.82) has joined #beagleboard
  • [04:10:31] <sundar> hi all
  • [04:11:04] <sundar> Does angstrom support the chipsee touchscreen?
  • [04:11:31] <thurbad> maybe?
  • [04:12:55] <thurbad> never heard of that driver to be honest
  • [04:12:59] <sundar> i would like to know if angstrom supports chipsee touchscreen for bb xm
  • [04:13:25] <sundar> yeah me too. thats why i am double checking before buying
  • [04:14:16] <thurbad> is it a usb based touchscreen?
  • [04:14:19] <sundar> if the driver is not free or isnt available under mainline kernel then its not worth buying
  • [04:14:33] <sundar> no. it connects through the lcd expansion connector
  • [04:14:39] <thurbad> ah
  • [04:15:07] <thurbad> I've only worked with usb hid touchscreens
  • [04:15:11] <sundar> i have seen some git branches in gitorious for camera expansion board
  • [04:15:37] <sundar> so how different are usb touchscreens from the lcd connector ones?
  • [04:16:14] * hitlin37 (b64723e4@gateway/web/freenode/ip.182.71.35.228) has joined #beagle
  • [04:22:15] * jkridner (~jkridner@nat/ti/x-actrhlayvadseyoj) has joined #beagle
  • [04:22:15] * jkridner (~jkridner@nat/ti/x-actrhlayvadseyoj) has joined #beagleboard
  • [04:22:15] * jkridner (~jkridner@nat/ti/x-actrhlayvadseyoj) Quit (Changing host)
  • [04:22:15] * jkridner (~jkridner@pdpc/supporter/active/jkridner) has joined #beagleboard
  • [04:22:15] * jkridner (~jkridner@pdpc/supporter/active/jkridner) has joined #beagle
  • [04:23:34] <sundar> they say angstrom directly supports the lcd http://tenettech.com/product.php?id_product=1474
  • [04:24:09] <sundar> i dont know if it means the demo angstrom supports the driver
  • [04:33:17] * NulL` (~bleh1@87.254.69.35) has joined #beagle
  • [04:33:17] * NulL` is now known as NulL```
  • [04:37:01] * NulL`` (~bleh1@31.172.184.155) Quit (Ping timeout: 276 seconds)
  • [04:41:53] * bgamari (~ben@pool-96-233-180-23.spfdma.east.verizon.net) Quit (Read error: Operation timed out)
  • [04:47:13] * mnt_real (~mnt_real@bas1-montreal43-2925385398.dsl.bell.ca) Quit (Quit: Leaving)
  • [04:55:44] * sundar (~quassel@110.234.156.82) Quit (Remote host closed the connection)
  • [04:58:13] * pbansal (~PBansal@nat/ti/x-nlpvfnbrfhlkuupc) has joined #beagle
  • [05:00:06] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [05:03:42] <DieMumie1> [34285.163024] PVR_K: (FAIL) SGXInit: Mismatch in client-side and KM driver build options; extra options present in client-side driver: (0x8000). Please check sgx_options.h
  • [05:05:12] <DieMumie1> where can i influence the options used for pvrsrvkm..and how can i find out what options are needed for the client side driver
  • [05:06:34] <dm8tbr> did you use the kernel module source that came with the SGX binaries?
  • [05:06:49] <DieMumie1> yes
  • [05:07:00] <DieMumie1> and 0x8000 seems to stand for SUPPORT_ACTIVE_POWER_MANAGEMENT
  • [05:07:26] <DieMumie1> and i have the feeling that it is enable
  • [05:07:27] <DieMumie1> d
  • [05:07:55] <DieMumie1> grep shows it in o.cmd files
  • [05:08:36] <DieMumie1> 0x1 << 15 hmm
  • [05:10:55] <dm8tbr> sorry, no idea then, maybe someone else will know
  • [05:13:06] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) Quit (*.net *.split)
  • [05:13:06] * Matt_O (~MattOwnby@216.160.243.228) Quit (*.net *.split)
  • [05:13:06] * tmzt_ (~tmzt@adsl-69-208-11-149.dsl.akrnoh.ameritech.net) Quit (*.net *.split)
  • [05:13:07] * nikarul (~link@108-77-59-55.lightspeed.mdsnwi.sbcglobal.net) Quit (*.net *.split)
  • [05:13:07] * tomba (tomba@taika.fi) Quit (*.net *.split)
  • [05:14:12] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  • [05:14:12] * Matt_O (~MattOwnby@216.160.243.228) has joined #beagle
  • [05:14:12] * tmzt_ (~tmzt@adsl-69-208-11-149.dsl.akrnoh.ameritech.net) has joined #beagle
  • [05:14:12] * nikarul (~link@108-77-59-55.lightspeed.mdsnwi.sbcglobal.net) has joined #beagle
  • [05:14:12] * tomba (tomba@taika.fi) has joined #beagle
  • [05:18:53] * chainsawbike (~chainsawb@chainsawbike-1-pt.tunnel.tserv25.sin1.ipv6.he.net) Quit (Excess Flood)
  • [05:21:03] * chainsawbike (~chainsawb@chainsawbike-1-pt.tunnel.tserv25.sin1.ipv6.he.net) has joined #beagle
  • [05:43:43] * Xerion (~xerion@5419A766.cm-5-2c.dynamic.ziggo.nl) Quit (Ping timeout: 248 seconds)
  • [05:49:38] * mranostay (~mranostay@108-64-218-123.lightspeed.moblal.sbcglobal.net) Quit (Quit: leaving)
  • [05:49:55] * mranostay (~mranostay@108-64-218-123.lightspeed.moblal.sbcglobal.net) has joined #beagle
  • [05:49:57] * dr__house (~vattam@unaffiliated/drhouse/x-385045) has joined #beagle
  • [05:51:37] * emeb_mac (~ericb@ip72-223-86-178.ph.ph.cox.net) Quit (Quit: emeb_mac)
  • [05:53:47] <dr__house> hi all, I'm facing a problem with networking on beagleboard. I'm running Ubuntu on it. How can configure the IP manually for the beagleboard? I'm using `ifconfig usb1 down; ifconfig hw ether <macaddr>; ifconfig up; dhclient`. But dhclient doesn't seem to work.
  • [05:53:47] * mranostay (~mranostay@108-64-218-123.lightspeed.moblal.sbcglobal.net) Quit (Read error: Connection reset by peer)
  • [05:54:29] <dr__house> It seems like dhclient tries obtaining an IP in the 158.130. range but I want it to use the 192.168. range
  • [05:54:42] <dm8tbr> BB or BBxm?
  • [05:55:58] <dr__house> dm8tbr: BBxm
  • [06:00:54] <doublebeta> well, are you sure your router isn't doing htat?
  • [06:01:16] <dm8tbr> where is that connected to?
  • [06:01:28] <doublebeta> If you're setting a static IP, you don't use dhclient at ALL
  • [06:01:37] <doublebeta> dhclient = DHCP
  • [06:01:48] <doublebeta> the two setups are mutually exclusive.
  • [06:02:18] <dm8tbr> doublebeta: what he posted looks like he tries dhcp after setting the MAC address manually
  • [06:02:38] <dm8tbr> which btw I'm not sure if will be reliable
  • [06:03:44] * mranostay (~mranostay@108-64-218-123.lightspeed.moblal.sbcglobal.net) has joined #beagle
  • [06:04:37] <doublebeta> ah, perhaps if he's trying to get his router to set static by MAC
  • [06:04:49] <doublebeta> tbh just use static configuration -.-"
  • [06:06:18] <dr__house> doublebeta: I tried without dhcp too, just ran ifconfig usb1 add 192.168.1.2 and it returns the prompt but when I try pinging my laptop connected to the same network it says connection unavailable
  • [06:07:35] <doublebeta> /etc/network/interfaces
  • [06:07:56] <doublebeta> 'man interfaces'
  • [06:07:59] <doublebeta> try that.
  • [06:08:09] <dr__house> doublebeta: ok
  • [06:08:11] <dr__house> thanks
  • [06:08:41] * koen (~koen@ip545070eb.adsl-surfen.hetnet.nl) has joined #beagle
  • [06:20:15] <DieMumie1> dm8tbr: yes it was not enabled.. thanks
  • [06:20:33] <DieMumie1> works now.. at least the powervr tests..
  • [06:22:32] <ds2> Hmmmm
  • [06:30:13] <dr__house> doublebeta: thanks, that worked
  • [06:31:54] <doublebeta> :D
  • [06:31:57] <doublebeta> np
  • [06:32:00] <doublebeta> glad to hear
  • [06:32:19] * DJW|Home (djwillis@cpc3-bath5-2-0-cust220.aztw.cable.virginmedia.com) has joined #beagle
  • [06:33:51] * DJWillis (djwillis@cpc3-bath5-2-0-cust220.aztw.cable.virginmedia.com) Quit (Ping timeout: 248 seconds)
  • [06:38:40] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [06:38:58] * structi (c3d69006@gateway/web/freenode/ip.195.214.144.6) has joined #beagle
  • [06:40:24] <structi> Hi, is there anyone who has an information about vlc on angstrom using beagleboard xm?
  • [06:43:22] * devanand (75d3564b@gateway/web/freenode/ip.117.211.86.75) has joined #beagle
  • [06:44:59] * balestrino (~balestrin@illegal-use-181-112.dimnp.unipi.it) has joined #beagle
  • [06:48:28] * DieMumie1 (~DieMumiee@p3E9C2641.dip.t-dialin.net) Quit (Remote host closed the connection)
  • [06:49:19] * flyer-xplorer (~nobody@bunny.guest.ucar.edu) Quit (Ping timeout: 248 seconds)
  • [06:50:15] * flyer-xplorer (~nobody@bunny.guest.ucar.edu) has joined #beagle
  • [07:08:35] <koen> mru: http://www.linaro.org/linaro-blog/2011/10/10/compiling-with-gcc-o3/
  • [07:08:43] <koen> " The -O3 flag enables many of the advanced features that we???ve been contributing to, such as the vectorizer"
  • [07:24:57] <hitlin37> instead of writing a lengthy article,they should show some sample code with effects of their changes in vectorization.
  • [07:26:38] <av500> hitlin37: we dont do differential updates
  • [07:28:03] <hitlin37> hmmmm....ok.anyway,i made the differential patch for kernel in android using their in built script.
  • [07:29:47] <hitlin37> its not generally used in practice as bsdiff generates patch of size same as kernel itself.
  • [07:32:39] * olsen (~sesselast@213.144.157.68) has joined #beagle
  • [07:41:20] * Russ (foobar@ip70-176-251-1.ph.ph.cox.net) has joined #beagle
  • [07:56:51] * derirremitderwaf (~derirremi@HSI-KBW-109-192-158-105.hsi6.kabel-badenwuerttemberg.de) has joined #beagle
  • [07:56:54] * derirremitderwaf (~derirremi@HSI-KBW-109-192-158-105.hsi6.kabel-badenwuerttemberg.de) has left #beagle
  • [08:05:01] * jpsaman (~jpsaman@184-195-ftth.onsbrabantnet.nl) has joined #beagle
  • [08:05:08] * jpsaman (~jpsaman@184-195-ftth.onsbrabantnet.nl) Quit (Changing host)
  • [08:05:08] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [08:08:04] * drakkan1000 (~drakkan@dynamic-adsl-78-12-180-94.clienti.tiscali.it) has joined #beagle
  • [08:20:12] * devanand (75d3564b@gateway/web/freenode/ip.117.211.86.75) Quit (Ping timeout: 252 seconds)
  • [08:22:51] * jpirko (jirka@nat/redhat/x-fbyiukrigdyzkwzt) has joined #beagle
  • [08:39:56] * florian (~fuchs@port-217-146-132-69.static.qsc.de) has joined #beagle
  • [08:40:07] * florian (~fuchs@port-217-146-132-69.static.qsc.de) Quit (Changing host)
  • [08:40:07] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [08:43:28] * dr__house (~vattam@unaffiliated/drhouse/x-385045) has left #beagle
  • [08:43:42] * elektronick (4ebfe142@gateway/web/freenode/ip.78.191.225.66) has joined #beagle
  • [08:44:23] <elektronick> hi dear friends
  • [08:44:42] <elektronick> i have a question for running ubuntu natty
  • [08:45:40] <elektronick> i wrote raw image to sd card and with minicom i tried to start
  • [08:45:46] <elektronick> the board
  • [08:46:45] <elektronick> On a serial console connected to the system, I TRIED to halt any autoboot script and type setenv bootcmd 'mmc init;fatload mmc 0 0x82000000 boot.scr;source 0x82000000'; setenv autostart yes; saveenv; boot
  • [08:47:16] <elektronick> but i cant enter any character from keyboard
  • [08:48:09] <elektronick> do i need to have any process to do before?? thanks
  • [08:50:19] <av500> can you stop the autoboot?
  • [08:50:23] <av500> if not check your serial
  • [08:50:31] <av500> turn flow control OFF
  • [08:53:58] * NotTooDumb3 (~vayavya@122.166.13.141) has joined #beagle
  • [08:54:24] * NotTooDumb3 is now known as Guest59838
  • [08:55:45] <elektronick> hardware and sofware flow is off
  • [08:56:01] <elektronick> but again no input
  • [08:56:42] <elektronick> should i upgrade xloader etc
  • [08:57:44] <av500> what kind of serial connection?
  • [08:58:01] <elektronick> usb to serial ttyUSB0
  • [09:02:20] * Kuri (~Kuri@2a01:e0b:1:129:ca0a:a9ff:fec8:e717) Quit (Remote host closed the connection)
  • [09:02:50] * Kuri (~Kuri@2a01:e0b:1:129:ca0a:a9ff:fec8:e717) has joined #beagle
  • [09:03:13] * olsen (~sesselast@213.144.157.68) Quit (Quit: Leaving.)
  • [09:06:55] * Russ (foobar@ip70-176-251-1.ph.ph.cox.net) Quit (Ping timeout: 255 seconds)
  • [09:09:01] * pbansal (~PBansal@nat/ti/x-nlpvfnbrfhlkuupc) Quit (Ping timeout: 258 seconds)
  • [09:09:50] * Russ (foobar@ip70-176-251-1.ph.ph.cox.net) has joined #beagle
  • [09:11:26] <doublebeta> does the serial port work? Connect RT to TX
  • [09:11:30] <doublebeta> *RX
  • [09:11:36] <doublebeta> it should echo characters
  • [09:12:11] * artib (~artib@122.166.11.13) has joined #beagle
  • [09:13:30] <elektronick> i can get character and see the text : Texas Instruments X-Loader 1.4.4ss (Jul 28 2010 - 16:59:13) Beagle Rev C4
  • [09:13:52] <elektronick> but i cant enter any from computers usb/serial port
  • [09:14:08] <doublebeta> yes...
  • [09:14:17] <doublebeta> that's why I asked you to see if you could echo characters
  • [09:14:24] <doublebeta> to see if the port's transmission worked
  • [09:14:34] * Russ (foobar@ip70-176-251-1.ph.ph.cox.net) Quit (Ping timeout: 255 seconds)
  • [09:16:48] <elektronick> may the reason be usb-serial converter with a long cable?
  • [09:17:43] <av500> elektronick: connect RX to TX and try
  • [09:21:29] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) Quit (Excess Flood)
  • [09:22:40] * olsen (~sesselast@fwe.zhdk.ch) has joined #beagle
  • [09:24:04] * ogra_ (~ogra@80.152.237.3) has joined #beagle
  • [09:24:30] * artib (~artib@122.166.11.13) Quit (Ping timeout: 260 seconds)
  • [09:26:03] <elektronick> i connected converter's tx to rx and there is echo..
  • [09:26:22] <doublebeta> even with the long cable?
  • [09:26:34] * howlymowly (~quassel@tubsat.fb12.tu-berlin.de) has joined #beagleboard
  • [09:26:34] * howlymowly (~quassel@tubsat.fb12.tu-berlin.de) has joined #beagle
  • [09:26:58] <elektronick> yeah long cable
  • [09:27:32] <doublebeta> Good that the cable works, bad the beagle doesn't... hmm...
  • [09:27:39] <doublebeta> can't see any obvious breakage?
  • [09:28:52] <elektronick> thanks i will try without long cable
  • [09:29:13] <elektronick> if it doesnoot resolved i will upgrade the x-loader
  • [09:35:28] * flyer-xplorer (~nobody@bunny.guest.ucar.edu) Quit (Ping timeout: 258 seconds)
  • [09:36:01] * flyer-xplorer (~nobody@128.117.47.123) has joined #beagle
  • [09:39:18] <speakman> does OMAP support serial boot?
  • [09:39:39] <speakman> http://www.omappedia.org/wiki/Bootloader_Project says "A simple ID is written out of the serial port. If the host responds correctly within a short window of time, the ROM will read from the serial port and transfer the data to the internal sram."
  • [09:40:03] <speakman> Didn't know of that
  • [09:40:29] <speakman> Anyone know which baudrate?
  • [09:41:08] <av500> 115200
  • [09:41:51] <speakman> ok. I've always had a serial cable connected at that baud rate and never noticed anything on it at boot. Maybe it's not character data at all?
  • [09:42:28] <av500> it prints 40V or so
  • [09:42:36] <speakman> ok
  • [09:42:46] <av500> depends on the boot order, if you check nand + sd first, then you dont see it
  • [09:42:56] <av500> erase nand and remove SD and you will see it
  • [09:43:27] <speakman> Not sure really how this board is designed. But I'm able to set sys_boot[0:5] using a jumper
  • [09:43:41] <av500> no
  • [09:43:48] <av500> only one of them is on the USR button
  • [09:43:56] <av500> the others you need to solder
  • [09:44:00] <av500> check the BBSRM
  • [09:44:18] <speakman> Sorry, I'm (still) on a beagleboard _like_ board :)
  • [09:45:23] <av500> well, check the schemtics then
  • [09:45:24] <speakman> sys_boot[5] I meant
  • [09:46:31] <Guest59838> av500, got a clue about why i am not seeing video on fb1, dispc_setup_plane is not getting called when i give fb1, and is getting called only in case of fb0
  • [09:46:47] <av500> no idea
  • [09:46:56] <av500> enable more debug or put more printk
  • [09:47:04] <av500> omapfb also has debug afaik
  • [09:48:16] <Guest59838> yes it has, i enabled omapfb and omapdss both, after that i got to see the diff
  • [09:49:00] <speakman> can XIP be used on NAND? Or what memory type would it require? Would NOR do? EEPROM?
  • [09:49:27] <speakman> "UART 3: Baud rate 115.2 Kbps, 8 bits, even parity, 1 stop-bit
  • [09:49:43] <speakman> "even parity" is used (pretty uncommon)
  • [09:50:43] <av500> no
  • [09:50:54] <av500> no XIP on nand
  • [09:51:14] <speakman> k
  • [09:51:33] <speakman> (sounds like it would make the product booting real fast!)
  • [09:52:32] <mru> koen: it's true, the vectoriser has got better
  • [09:52:43] <mru> most code doesn't get slower any more
  • [09:53:23] <speakman> "The ROM code can boot directly from XIP devices, such as NOR flash memories,
  • [09:53:25] <speakman> <3
  • [09:53:48] <Guest59838> if you find anything obvious from logs, log while playing video on fb0 http://pastebin.com/hw3uwiCD log while playing video on fb1 http://pastebin.com/pNKumy2d
  • [09:55:00] <Guest59838> av500, mru, any idea if GO LCD has to be set for each overlay?
  • [10:02:45] <av500> Guest59838: did you compare the logs
  • [10:02:47] <av500> ?
  • [10:02:54] <Guest59838> video overlay is not getting initialized properly, after running on fb1 also, DISPC_VID_ATTRIBUTES contents are zero, which has vid1 window enable in it
  • [10:03:30] <av500> Guest59838: did you compare the logs?
  • [10:03:43] <Guest59838> yes i compared, and not knowing why the configure overlay is not getting called in case of fb1
  • [10:04:10] <av500> so why dont you start from the last lines that both have in common?
  • [10:04:19] <av500> and work from there?
  • [10:05:33] <Guest59838> ya i am working, need to see why the diff
  • [10:06:56] <av500> so, what do you find?
  • [10:07:04] <Guest59838> is omap_dss_probe supposed to get called by mplayer, whenever it uses dss?
  • [10:07:04] <av500> its only a few files
  • [10:07:14] <av500> work from the logs
  • [10:07:30] <av500> what is the last common line?
  • [10:07:39] <Guest59838> yes from logs, i went to the differing line and it's calling functions
  • [10:07:45] <av500> which one?
  • [10:09:08] <Guest59838> check_overlay is the first differing line, and it's calling calling...function is omap_dss_probe
  • [10:09:33] <av500> Guest59838: yes, but you have to work from the common lines
  • [10:09:54] <Guest59838> ok i will
  • [10:10:37] * mikecsh (~mikecsh@113.28.74.33) Quit (Quit: mikecsh)
  • [10:10:49] <av500> also, did you put printks into check_overlay to see if it exits early?
  • [10:11:41] <Guest59838> if it exits early meaning?
  • [10:13:17] <av500> http://pastebin.com/0a4Qpn3k
  • [10:13:55] <av500> 1) does dss_check_overlay() get called?
  • [10:14:07] <av500> 2) if yes, does it return before DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n",....
  • [10:14:10] <av500> is that all so hard?
  • [10:16:42] <Guest59838> dss_check_overlay() does not get called in case of fb1, the original call of all these omap_dss_probe itself is not called incase of fb1
  • [10:17:36] <av500> http://pastebin.com/vZwekGSL
  • [10:18:03] <av500> Guest59838: are you doing theory or did you put the printks?
  • [10:19:24] <Guest59838> i will check now with more print
  • [10:20:45] <av500> Guest59838: put pritnks in the whole chain between the last common log and DSSDBG("check_overlay ...
  • [10:20:58] <Guest59838> ok thank you
  • [10:24:44] * erbo (~erik@62.65.124.36) Quit (Ping timeout: 244 seconds)
  • [10:25:32] * erbo (~erik@62.65.124.36) has joined #beagle
  • [10:30:11] * doublebeta is now known as doublebeta-sleep
  • [10:38:00] <koen> mru: the hospital processed your remark, the long function test involved needles to measure the iron content
  • [10:38:17] <mru> can't that be done with magnets?
  • [10:39:50] <av500> or lasers
  • [10:43:54] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Quit: Leaving)
  • [10:49:39] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [10:54:09] * risca (~risca@norr-133-139.eduroam.liu.se) has joined #beagle
  • [10:58:47] <Guest59838> how do we get to know which debug functions corresponds to which debug options in boot args like DBG() corresponds to omapfb.debug in boot args and DSSDBG() corresponds to omapdss.debug
  • [11:02:12] * koen wonders why he is hacking on uboot again
  • [11:06:27] <Guest59838> ok i did not know that we get to know that correlation from uboot
  • [11:06:46] * DJW|Home is now known as DJWillis
  • [11:08:43] * structi (c3d69006@gateway/web/freenode/ip.195.214.144.6) Quit (Quit: Page closed)
  • [11:08:44] <av500> Guest59838: this is irc
  • [11:17:09] <koen> av500: no, this is sparta!
  • [11:17:20] * n00b__ (8af61fde@gateway/web/freenode/ip.138.246.31.222) has joined #beagle
  • [11:17:51] <n00b__> Hello, finally i got the usb mouse/keyboard to work. it was a defect beagle board..
  • [11:17:56] <Guest59838> av500, did not get you, why you are reminding me that it's irc?
  • [11:18:18] <Crofton|work> Guest59838, sometimes we are less serious than other times
  • [11:18:29] <Guest59838> ok
  • [11:18:43] <n00b__> Another question: is it possible to backup the nand flash? because before I write a new u-boot version, i want to be able to restore the previous one.
  • [11:19:23] <n00b__> i don't have the original u-boot.bin
  • [11:19:37] <koen> Beagle xM Rev A
  • [11:19:38] <koen> Recognized Tincantools Beacon board (rev 0 0x0)
  • [11:19:38] <koen> Recognized BeagleBoardToys uLCD-lite board
  • [11:19:42] <koen> \o/
  • [11:22:11] <av500> n00b__: you can always flash a new nand
  • [11:22:50] <av500> Guest59838: because sometimes people are not talking to you
  • [11:23:07] <Guest59838> ok
  • [11:23:39] <av500> its like a cocktail party in the dark
  • [11:23:47] <n00b__> av500: yes, but i want to backup the current u-boot version in use. because i have not the u-boot.bin file for this. Is there something like mmc write?
  • [11:24:27] <av500> you have a super modified uboot and lost the source code?
  • [11:26:08] <n00b__> not really. someone gave me at work this beagle board, and in case something goes wrong i need to recover the u-boot version in use
  • [11:27:03] <n00b__> can linux read nand from the beagle with the dd command?
  • [11:28:43] <DJWillis> n00b__: been a VERY LONG time since I did it but you should be able to scoop it off the correct /dev/mtd* device.
  • [11:28:45] <av500> n00b__: why dont you boot from SD then and leave nand untouched?
  • [11:30:11] <n00b__> av500: when i try to boot with the user button pressed, u-boot boots from nand intead of mmc.. is there another way?
  • [11:30:28] <av500> compile an MLO that ignores nand
  • [11:30:45] <DJWillis> n00b__: boot script (depending on the u-boot installed) or make your SD actually bootable ;)
  • [11:30:45] <n00b__> do i need to flash MLO on nand?
  • [11:30:50] <av500> no
  • [11:30:53] <n00b__> ok
  • [11:31:03] <av500> DJWillis: MLO does not read boot scripts
  • [11:31:22] <av500> DJWillis: MLO from sd still loads uboot from nand
  • [11:31:33] <av500> glare at koen and such
  • [11:32:06] <koen> MLO from SD will load uboot from SD
  • [11:32:11] <DJWillis> av500: no, sorry, I was assuming he wanted to launch another u-boot, you could run that by having the nand u-boot read a script and load the new u-boot on SD from that.
  • [11:32:13] <koen> MLO knows where it loaded from
  • [11:32:25] <av500> koen: last time I asked you told me otherwise
  • [11:32:42] <koen> I was mistaken then
  • [11:33:03] * av500 stops the glare ray
  • [11:33:15] <DJWillis> lol
  • [11:33:20] <n00b__> DJWillis: yes that is it what i need. who do i procede?
  • [11:33:37] * mikecsh (~mikecsh@203.145.92.119) has joined #beagle
  • [11:33:40] <n00b__> how*
  • [11:33:52] <DJWillis> n00b__: if MLO knows where it got run just make a bootable SD and leave the whole NAND WELL ALONE ;)
  • [11:34:28] <n00b__> sorry but any guide for this? i have no idea how to do that.?
  • [11:34:32] <av500> aka "boot from SD"
  • [11:35:26] <DJWillis> n00b__: http://www.sakoman.com/OMAP/a-script-for-partitioningformatting-a-bootable-sdmicrosd-card.html + a suitable MLO + your uboot.bin + some luck and booze.
  • [11:36:10] <n00b__> thanks
  • [11:37:43] <n00b__> once i have an MLO file on my sd card, what should i do to load it?
  • [11:37:49] <n00b__> fatload ..?
  • [11:38:04] <av500> no
  • [11:38:10] <av500> the ROM code will load it
  • [11:38:36] <n00b__> so I just need an MLO file on my sd card, and the board loads it automatically on power on. right?
  • [11:38:43] <DJWillis> n00b__: just get a bootable SD and files then boot with the user button, no need to do 'anything' more than that ;).
  • [11:39:50] <av500> http://elinux.org/BeagleBoardRecovery
  • [11:40:19] <av500> and many other pages on elinux and other websites
  • [11:40:25] <DJWillis> av500: much better link ;)
  • [11:40:36] <av500> http://www.angstrom-distribution.org/demo/beagleboard/
  • [11:40:51] <n00b__> regarding the user button, when pressed nothing happens on boot. does the button work only when there a bootable sd + mlo?
  • [11:41:21] <av500> the button always works
  • [11:41:26] <av500> it connects a pin to GND
  • [11:41:26] <n00b__> not here :(
  • [11:41:48] <av500> unless broken, the buttons connects a pin to GND
  • [11:42:05] <av500> but trying to boot from SD without MLO is kinda useless
  • [11:43:00] <n00b__> ok but is this normal with USER button down?
  • [11:43:01] <n00b__> http://pastebin.com/TeqT6x0f
  • [11:43:06] <DJWillis> n00b__: maybe http://blogs.distant-earth.com/wp/?p=79#low will explain more (START = User button on the OpenPandora).
  • [11:43:32] <n00b__> ah nice, thanks
  • [11:44:30] <DJWillis> n00b__: the rest is a 'tiny' bit OP specific but not much, the hardware boot rom and how it works (and decides what to load into SRAM) is the same and nice and consistant ;)
  • [11:44:46] <av500> n00b__: that log is truncated
  • [11:45:27] <Guest59838> In this file drivers/video/omap2/dss/overlay.c, in function, dss_check_overlay() when i play with fb0 ovl->info.enabled=1 and with fb1 ovl->info.enabled=0, so after default_get_resolution() in display.c for dssdev->get_resolution() is not getting called..
  • [11:45:30] <n00b__> yes, lost the # sign
  • [11:46:13] <av500> Guest59838: so overlay 1 is not enabled?
  • [11:46:27] <av500> I told you to check that weeks ago
  • [11:46:45] <Guest59838> overlay1 is enabled, dssdev incase of overlay1 is non zero too
  • [11:47:04] <av500> so where does it return then?
  • [11:47:20] <av500> why does it not prink the check_overlay... debug?
  • [11:47:39] <Guest59838> ok i saw where it is returning
  • [11:48:19] <av500> where?
  • [11:49:16] <Guest59838> http://pastebin.com/xVJj8wZx in this after if (!ovl->info.enabled) return 0;
  • [11:49:27] <Guest59838> in overlay.c
  • [11:49:50] <Guest59838> info = &ovl->info; as it is returning before this, info of fb1 is not getting initialized
  • [11:52:08] * n00b__ (8af61fde@gateway/web/freenode/ip.138.246.31.222) Quit (Ping timeout: 252 seconds)
  • [11:53:41] * jkridner (~jkridner@pdpc/supporter/active/jkridner) Quit (Ping timeout: 260 seconds)
  • [11:53:58] * l4 (~marius@88.119.128.50) has joined #beagle
  • [11:55:13] * kevinsc_ (~anonymous@166.147.66.46) has joined #beagle
  • [11:57:04] <Guest59838> i am forcibly making ovl->info.enabled = 1; and will see if that helps..
  • [12:00:18] <Guest59838> are there any particular reasons for video to flicker when i decrease window size?
  • [12:03:34] <av500> window size?
  • [12:05:25] <Guest59838> ok sorry overlay size like using fbset
  • [12:05:38] * jkridner (~jkridner@nat/ti/x-iuolkorigeomvtsx) has joined #beagle
  • [12:05:38] * jkridner (~jkridner@nat/ti/x-iuolkorigeomvtsx) has joined #beagleboard
  • [12:05:38] * jkridner (~jkridner@nat/ti/x-iuolkorigeomvtsx) Quit (Changing host)
  • [12:05:38] * jkridner (~jkridner@pdpc/supporter/active/jkridner) has joined #beagleboard
  • [12:05:38] * jkridner (~jkridner@pdpc/supporter/active/jkridner) has joined #beagle
  • [12:05:46] * arun (~arun@2001:610:110:4e2:280:5aff:fe69:e130) has joined #beagle
  • [12:05:46] * arun (~arun@2001:610:110:4e2:280:5aff:fe69:e130) Quit (Changing host)
  • [12:05:46] * arun (~arun@unaffiliated/sindian) has joined #beagle
  • [12:13:49] <Guest59838> if i make ovl->info.enabled = 1; forcibly, now i see video on fb1 but not angstrom logo or video on fb0..do not know when that enabled is used and set or reset
  • [12:15:42] <av500> the code tells you
  • [12:16:23] * kevinsc_ (~anonymous@166.147.66.46) Quit (Quit: Colloquy for iPad - http://colloquy.mobi)
  • [12:22:28] * olsen (~sesselast@fwe.zhdk.ch) Quit (Quit: Leaving.)
  • [12:22:31] * olsen1 (~sesselast@fwe.zhdk.ch) has joined #beagle
  • [12:28:19] * kevinsc is now known as kevinsc1
  • [12:28:31] * kevinsc1 is now known as kevinsc_
  • [12:28:40] * kevinsc_ is now known as kevinsc
  • [12:29:34] * derirremitderwaf (~derirremi@HSI-KBW-109-192-158-105.hsi6.kabel-badenwuerttemberg.de) has joined #beagle
  • [12:29:38] * derirremitderwaf (~derirremi@HSI-KBW-109-192-158-105.hsi6.kabel-badenwuerttemberg.de) has left #beagle
  • [12:35:12] <Guest59838> av500, go lcd bit can only be set once, may that is the reason why code is written exclusive for only one overlay at a time?
  • [12:36:51] * kevinsc (~a0214685@nat/ti/x-cbvlveeiwansgjgx) Quit (Ping timeout: 260 seconds)
  • [12:37:13] * raster (raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [12:41:57] * Darren (~darreneth@nat/ti/x-ikthbaymnztmnyzd) has joined #beagle
  • [12:42:35] * novogrammer (~novogramm@w0109-49-134-102-75.uqwimax.jp) has joined #beagle
  • [12:46:44] * thurbad (~natesewel@cpe-70-124-80-154.austin.res.rr.com) Quit (Quit: thurbad)
  • [12:46:48] * prpplague (~prpplague@ppp-70-242-126-204.dsl.rcsntx.swbell.net) Quit (Quit: Later Folks!)
  • [12:47:57] * kevinsc (~a0214685@nat/ti/x-nfxsuzbpwamzlyys) has joined #beagle
  • [12:50:51] * Guest59838 (~vayavya@122.166.13.141) Quit (Quit: Leaving)
  • [12:55:11] * sb_ (4e569229@gateway/web/freenode/ip.78.86.146.41) has joined #beagle
  • [12:55:21] <sb_> hello
  • [12:56:22] <sb_> i have a beagleboard that's has a quick flash on the two mmc led's and d13, d14
  • [12:56:36] <sb_> the power led is on solid and fails to boot from the sd card
  • [12:57:19] * joelagnel (~joel@cpe-76-184-244-226.tx.res.rr.com) has joined #beagle
  • [12:58:08] <sakoman_> koen: have you done a recipe for uboot-spl?
  • [12:59:34] <Crofton|work> -spl?
  • [13:00:49] <mru> ~x-loader
  • [13:01:28] <av500> it should be called IPL
  • [13:01:30] <av500> not spl
  • [13:02:48] <av500> http://publib.boulder.ibm.com/infocenter/iseries/v5r3/index.jsp?topic=%2Frzahc%2Fopt.htm
  • [13:06:36] <DJWillis> av500: unless you count the boot rom as the IPL in this case (I don't) ;)
  • [13:08:13] <av500> DJWillis: I learned the term from my mom who worked with IBM mainframes :)
  • [13:09:11] * bgamari (~ben@pool-96-233-180-23.spfdma.east.verizon.net) has joined #beagle
  • [13:09:24] <mru> av500: oh, yours did that too?
  • [13:09:41] <DJWillis> av500: well it seems I am wrong anyway ;), I always took IPL to be initial program load and SPL to be subsequent (or secondry) program load. Mind you that comes from VAX days ;)
  • [13:09:56] <av500> DJWillis: so uboot it TPL then
  • [13:10:05] <DJWillis> :)
  • [13:11:24] <koen> sakoman_: yes
  • [13:11:54] <koen> sakoman_: http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/meta-texasinstruments/tree/recipes-bsp/u-boot/u-boot_2011.10rc.bb
  • [13:12:13] <koen> sakoman_: 'make' builds spl and uboot.img in one go
  • [13:13:30] <sakoman_> koen: only works with beaglebone?
  • [13:19:24] * rcranetx (~rcranetx@nat/ti/x-lesgtuhwxnmxruuh) has joined #beagle
  • [13:20:02] * gustavoz (~gustavoz@host49.186-109-136.telecom.net.ar) has joined #beagle
  • [13:26:57] * thurbad (~natesewel@64.132.24.248) has joined #beagle
  • [13:27:42] <koen> sakoman_: there's a branch that also works on xm, but I haven't tried that
  • [13:30:27] * jkridner (~jkridner@pdpc/supporter/active/jkridner) Quit (Ping timeout: 258 seconds)
  • [13:33:00] <mdp> also works on 387x/814x in my github tree
  • [13:33:39] * fairytale223 (4cb8f4e2@gateway/web/freenode/ip.76.184.244.226) has joined #beagle
  • [13:35:04] <mdp> Tartarus was working on both BB variants and his oct7 branch probably works
  • [13:38:41] * rcranetx (~rcranetx@nat/ti/x-lesgtuhwxnmxruuh) Quit (Remote host closed the connection)
  • [13:40:07] * rcranetx (~rcranetx@nat/ti/x-nxbtlamaktndkrhf) has joined #beagle
  • [13:42:26] * emeb_mac (~ericb@ip72-223-86-178.ph.ph.cox.net) has joined #beagle
  • [13:43:23] * rcranetx (~rcranetx@nat/ti/x-nxbtlamaktndkrhf) Quit (Remote host closed the connection)
  • [13:44:22] * jkridner (~jkridner@pdpc/supporter/active/jkridner) has joined #beagle
  • [13:44:22] * jkridner (~jkridner@pdpc/supporter/active/jkridner) has joined #beagleboard
  • [13:44:27] * drakkan1000 (~drakkan@dynamic-adsl-78-12-180-94.clienti.tiscali.it) Quit (Quit: Ex-Chat)
  • [13:45:58] * rcranetx (~rcranetx@nat/ti/x-qfowfhayijplqgiv) has joined #beagle
  • [13:46:36] * rcranetx (~rcranetx@nat/ti/x-qfowfhayijplqgiv) Quit (Remote host closed the connection)
  • [13:49:28] * sb_ (4e569229@gateway/web/freenode/ip.78.86.146.41) Quit (Ping timeout: 252 seconds)
  • [13:52:25] * l4 (~marius@88.119.128.50) Quit (Quit: l4)
  • [13:54:35] * mranostay waves
  • [13:54:56] * rcranetx (~rcranetx@nat/ti/x-lenuzdnjthgcqacb) has joined #beagle
  • [13:57:20] * peabody124 (~peabody12@108-205-218-4.lightspeed.hstntx.sbcglobal.net) Quit (Quit: peabody124)
  • [13:58:00] * jkridner (~jkridner@pdpc/supporter/active/jkridner) Quit (Ping timeout: 255 seconds)
  • [13:58:50] * panto (~panto@athedsl-4368406.home.otenet.gr) has joined #beagle
  • [14:07:20] * djerome (~djerome@ip24-251-138-141.ph.ph.cox.net) has joined #beagle
  • [14:08:43] * djerome (~djerome@ip24-251-138-141.ph.ph.cox.net) has left #beagle
  • [14:09:49] * mikecsh (~mikecsh@203.145.92.119) Quit (Quit: mikecsh)
  • [14:14:16] * hitlin37 (b64723e4@gateway/web/freenode/ip.182.71.35.228) Quit (Quit: Page closed)
  • [14:15:30] * elektronick (4ebfe142@gateway/web/freenode/ip.78.191.225.66) Quit (Ping timeout: 252 seconds)
  • [14:19:00] * Matt_O (~MattOwnby@216.160.243.228) Quit (*.net *.split)
  • [14:19:00] * tmzt_ (~tmzt@adsl-69-208-11-149.dsl.akrnoh.ameritech.net) Quit (*.net *.split)
  • [14:19:01] * nikarul (~link@108-77-59-55.lightspeed.mdsnwi.sbcglobal.net) Quit (*.net *.split)
  • [14:19:01] * tomba (tomba@taika.fi) Quit (*.net *.split)
  • [14:20:18] * killring (~killring@76.226.207.91) has joined #beagle
  • [14:21:01] * CMoH-office (~cipi@89.238.251.90) has joined #beagle
  • [14:21:01] * CMoH-office (~cipi@89.238.251.90) Quit (Changing host)
  • [14:21:01] * CMoH-office (~cipi@unaffiliated/c-moh) has joined #beagle
  • [14:21:07] * emeb_mac (~ericb@ip72-223-86-178.ph.ph.cox.net) Quit (Quit: emeb_mac)
  • [14:22:40] * myhrman (~arune@83.140.94.129.biz.sta.port80.se) Quit (Ping timeout: 276 seconds)
  • [14:22:43] <koen> where's prpplague hiding?
  • [14:22:56] * BlInK311 (~Ward@ool-435317d6.dyn.optonline.net) has joined #beagle
  • [14:23:05] <koen> I added the WS2801 driver to the beagle kernel
  • [14:23:15] <koen> and activated the heartbeat trigger for it
  • [14:23:32] <koen> no I see LED shaped spots floating in my vising
  • [14:23:41] * myhrman (~arune@83.140.94.129) has joined #beagle
  • [14:23:42] <koen> that thing is too darn BRIGHT
  • [14:24:25] * emeb (~ericb@ip72-223-86-178.ph.ph.cox.net) has joined #beagle
  • [14:24:27] * Matt_O (~MattOwnby@216.160.243.228) has joined #beagle
  • [14:24:27] * tmzt_ (~tmzt@adsl-69-208-11-149.dsl.akrnoh.ameritech.net) has joined #beagle
  • [14:24:27] * nikarul (~link@108-77-59-55.lightspeed.mdsnwi.sbcglobal.net) has joined #beagle
  • [14:24:27] * tomba (tomba@taika.fi) has joined #beagle
  • [14:24:46] <av500> koen: its a heartDRUMbeat
  • [14:25:20] * jkridner (~jkridner@pdpc/supporter/active/jkridner) has joined #beagle
  • [14:25:20] * jkridner (~jkridner@pdpc/supporter/active/jkridner) has joined #beagleboard
  • [14:26:55] * prpplague (~danders@nat/ti/x-lhtyylcqxpxcoipx) has joined #beagle
  • [14:27:28] * bgamari (~ben@pool-96-233-180-23.spfdma.east.verizon.net) Quit (Ping timeout: 245 seconds)
  • [14:29:27] * Hoolxi (~Openfree@116.237.88.101) has joined #beagle
  • [14:31:47] * djlewis (~djlewis@75.15.65.156) has joined #beagle
  • [14:35:48] * Hoolxi (~Openfree@116.237.88.101) Quit (Ping timeout: 260 seconds)
  • [14:36:04] * peabody124 (~peabody12@128.249.96.21) has joined #beagle
  • [14:47:45] * jconnolly (~jconnolly@66.43.64.66) Quit (Remote host closed the connection)
  • [14:48:19] * jconnolly (~jconnolly@66.43.64.66) has joined #beagle
  • [14:57:56] * rcranetx (~rcranetx@nat/ti/x-lenuzdnjthgcqacb) Quit (Quit: Leaving.)
  • [14:58:47] * Matt_O1 (~MattOwnby@216.160.243.228) has joined #beagle
  • [15:01:28] * rcranetx (~rcranetx@nat/ti/x-yfusngvgyaweeywp) has joined #beagle
  • [15:02:37] * risca (~risca@norr-133-139.eduroam.liu.se) Quit (Ping timeout: 260 seconds)
  • [15:02:59] * tmzt (~tmzt@adsl-69-208-11-149.dsl.akrnoh.ameritech.net) has joined #beagle
  • [15:05:24] * bgamari (~ben@physicsnat56.physics.umass.edu) has joined #beagle
  • [15:05:31] * kevinsc (~a0214685@nat/ti/x-nfxsuzbpwamzlyys) Quit (Quit: Leaving.)
  • [15:05:34] * tomba (tomba@taika.fi) Quit (Ping timeout: 256 seconds)
  • [15:05:34] * Matt_O (~MattOwnby@216.160.243.228) Quit (Ping timeout: 256 seconds)
  • [15:05:35] * tmzt_ (~tmzt@adsl-69-208-11-149.dsl.akrnoh.ameritech.net) Quit (Ping timeout: 256 seconds)
  • [15:05:43] * tomba (~tomba@taika.fi) has joined #beagle
  • [15:07:42] * kevinsc (~a0214685@nat/ti/x-sfqqrdhsqyygeyda) has joined #beagle
  • [15:16:30] * BlInK311 (~Ward@ool-435317d6.dyn.optonline.net) Quit (Quit: Leaving)
  • [15:20:43] * olsen (~sesselast@fwe.zhdk.ch) has joined #beagle
  • [15:21:39] * olsen2 (~sesselast@fwe.zhdk.ch) has joined #beagle
  • [15:22:39] * olsen1 (~sesselast@fwe.zhdk.ch) Quit (Ping timeout: 252 seconds)
  • [15:25:04] * olsen (~sesselast@fwe.zhdk.ch) Quit (Ping timeout: 258 seconds)
  • [15:26:05] * brma (~brma@187.78.134.55) has joined #beagleboard
  • [15:26:05] * brma (~brma@187.78.134.55) has joined #beagle
  • [15:27:11] * eagle (c21b487a@gateway/web/freenode/ip.194.27.72.122) has joined #beagle
  • [15:30:01] <eagle> hi , ?? bougt a beagleboard*xm rev C i can boot it but 4 usb port and ethernet don't work(no power)
  • [15:30:35] <thurbad> which distro are you using?
  • [15:30:53] <eagle> is there any configuration file to fix this problem
  • [15:31:00] <eagle> angstrom
  • [15:31:08] <thurbad> you need to fix the kernel
  • [15:31:16] * Zoxc (Zoxc@ti0128a380-dhcp0301.bb.online.no) Quit (Read error: Connection reset by peer)
  • [15:31:26] <thurbad> do you still have the one that came on the SD you got with the board?
  • [15:32:03] <eagle> ?? have card but i changed files
  • [15:32:35] <thurbad> ok, try the uimage from the demo page on the angstrom site
  • [15:32:43] <eagle> i wrote final image 2011.09.27
  • [15:32:47] * jayabharath (~jayabhara@nat/ti/x-mgxachdjhtuckmeh) has joined #beagle
  • [15:33:05] <thurbad> drop that in /boot on the rootfs of the SD
  • [15:33:09] <eagle> i tried different images
  • [15:33:21] <eagle> 4*5 images
  • [15:33:30] <eagle> 4-5 imge that i tried
  • [15:33:35] <thurbad> new uboot doesn't use the old uImage location on the boot partition
  • [15:34:17] <thurbad> so putting it on the boot partition won't do it
  • [15:34:40] <eagle> actually i downloaded the final image for beagle-xm
  • [15:34:52] <eagle> what should i do different
  • [15:35:04] <thurbad> where did you put uImage?
  • [15:35:21] <eagle> i didn't put any where because
  • [15:35:50] <eagle> image files can be written directly to card wit h win32 disk manager
  • [15:36:15] <thurbad> oh... you're using windows for desktop
  • [15:36:24] <eagle> yes
  • [15:36:36] <eagle> ?? used also linux
  • [15:36:42] <eagle> but it didnt work
  • [15:36:59] * balestrino (~balestrin@illegal-use-181-112.dimnp.unipi.it) Quit (Ping timeout: 260 seconds)
  • [15:37:08] <eagle> i asked about my teacher
  • [15:37:18] <thurbad> put a new uImage on the boot partition then, boot into angstrom and place the uImage into /boot
  • [15:37:29] <eagle> he said it should be software problem
  • [15:38:11] <thurbad> it is a problem in the kernel, the rev C changed the polarity of the USB power enable pin
  • [15:38:15] <eagle> there is a uImage in boot partition
  • [15:38:28] <thurbad> replace it
  • [15:38:53] <eagle> ok but what's different
  • [15:39:07] * Zoxc (Zoxc@ti0128a380-dhcp0301.bb.online.no) has joined #beagle
  • [15:39:16] <thurbad> the new kernel checks for rev C and corrects the polarity problem
  • [15:40:50] <eagle> kernel that i used is announced last
  • [15:41:48] <eagle> do u think kernel that is in the angstrom demo files is newer than mine
  • [15:43:13] <thurbad> http://www.circuitco.com/support/index.php?title=Circuitco_Support_Wiki#Rev_C
  • [15:44:11] * jpirko (jirka@nat/redhat/x-fbyiukrigdyzkwzt) Quit (Quit: Leaving)
  • [15:44:40] <eagle> i know this page because i tried xMx_4.25 image
  • [15:44:52] <eagle> xMc_4.25
  • [15:46:14] <thurbad> ddiyou place the uImage from it in your /boot folder?
  • [15:46:35] <eagle> there is also different image i use that now
  • [15:47:05] <eagle> no i didn't yet because my beagle not with me now
  • [15:47:56] <eagle> http://beagleboard.org/static/presentations/boston2011/beagleboard101/#(7) in tis presentation there is a final sd card image
  • [15:48:00] <eagle> i use that
  • [15:48:41] <eagle> if u pay attention u see date on the file
  • [15:50:58] * CMoH-office (~cipi@unaffiliated/c-moh) Quit (Read error: Connection reset by peer)
  • [15:53:38] <eagle> thurbab
  • [15:54:10] <thurbad> I don't see a kernel in there
  • [15:56:44] <eagle> ok now u say ?? shold copy to uImage to /boot from /narcissus/boot
  • [15:56:49] <eagle> am i right
  • [15:57:36] <thurbad> yes, copy the latest version of uImage to /boot
  • [15:58:42] <eagle> where can i find
  • [16:00:07] <eagle> http://www.angstrom-distribution.org/demo/beagleboard/
  • [16:00:29] <thurbad> have you tried the one there?
  • [16:00:38] <eagle> is this kernel is the latest
  • [16:00:54] <thurbad> should be current enough
  • [16:00:56] <eagle> yes i did but with different imge
  • [16:01:17] <eagle> not with this image
  • [16:02:38] <eagle> and do u now how can i access to usb file in this image
  • [16:02:47] <eagle> i'm gonna try this
  • [16:03:24] <thurbad> usb is support is part of the kernel
  • [16:03:34] <thurbad> uImage is the kernel
  • [16:04:01] <thurbad> oops extra is after usb
  • [16:04:31] * chrisw957 (~chris@mail.tacticalelectronics.com) Quit (Ping timeout: 248 seconds)
  • [16:04:58] <eagle> what do you mean icouldn't understand last sentencce
  • [16:09:03] <eagle> thank you thurbad
  • [16:09:30] <koen> Crofton|work: blkid patch is in master now
  • [16:13:59] <thurbad> got it working now eagle?
  • [16:17:53] <eagle> nop i havent tried if it works im gonna write to u
  • [16:19:45] * benmcnelly (~ben@adsl-99-38-78-150.dsl.spfdmo.sbcglobal.net) has joined #beagle
  • [16:20:01] * Russ_ (foobar@ip70-176-251-1.ph.ph.cox.net) has joined #beagle
  • [16:22:52] * elektronick (58f86e80@gateway/web/freenode/ip.88.248.110.128) has joined #beagle
  • [16:23:14] * rcranetx (~rcranetx@nat/ti/x-yfusngvgyaweeywp) Quit (Quit: Leaving.)
  • [16:23:33] <elektronick> when i write setenv bootcmd 'mmc init;fatload mmc 0 0x82000000 boot.scr;source 0x82000000';
  • [16:23:54] <elektronick> i got error Writing to Nand... done Usage: mmcinit - init mmc card ** Unable to use mmc 0:1 for fatload **
  • [16:24:43] <elektronick> when i write mmcinit instead of mmc init
  • [16:25:05] <elektronick> i got error like that Writing to Nand... done reading boot.scr ** Unable to read "boot.scr" from mmc 0:1 **
  • [16:25:59] * rcranetx (~rcranetx@nat/ti/x-imyrgzxfvkuahyww) has joined #beagle
  • [16:26:14] <elektronick> anyone has any suggestion?(U-Boot 2009.01-dirty (Feb 19 2009 - 12:22:31)) am i update u-boot
  • [16:29:17] * Russ_ (foobar@ip70-176-251-1.ph.ph.cox.net) Quit (Ping timeout: 255 seconds)
  • [16:29:25] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
  • [16:40:20] * eagle (c21b487a@gateway/web/freenode/ip.194.27.72.122) Quit (Ping timeout: 252 seconds)
  • [16:46:09] * Hoolxi (~Openfree@116.237.94.116) has joined #beagle
  • [16:47:15] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Remote host closed the connection)
  • [17:00:23] * Darren (~darreneth@nat/ti/x-ikthbaymnztmnyzd) Quit (Ping timeout: 245 seconds)
  • [17:08:02] * joelagnel is now known as joel-afk
  • [17:08:23] * joel-afk is now known as joelagnel
  • [17:11:03] * virals (~viral@122.179.111.25) has joined #beagle
  • [17:14:32] * djlewis (~djlewis@75.15.65.156) Quit (Quit: Leaving.)
  • [17:16:31] * panto (~panto@athedsl-4368406.home.otenet.gr) Quit (Ping timeout: 244 seconds)
  • [17:23:36] * elektronick (58f86e80@gateway/web/freenode/ip.88.248.110.128) Quit (Ping timeout: 252 seconds)
  • [17:25:10] * panto (~panto@athedsl-4368406.home.otenet.gr) has joined #beagle
  • [17:31:35] * GPSFan (~kenm@64.92.145.112) has joined #beagle
  • [17:37:21] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [17:47:31] * Darren (~darreneth@nat/ti/x-uvqoorhowxflokkv) has joined #beagle
  • [17:51:12] * jayabharath_ (~jayabhara@nat/ti/x-cdvgbmfffmzkvsrw) has joined #beagle
  • [17:53:26] * jayabharath (~jayabhara@nat/ti/x-mgxachdjhtuckmeh) Quit (Ping timeout: 260 seconds)
  • [18:02:04] * BThompson (bhthompson@nat/google/x-tvyzfrfblvvrprno) Quit (Quit: Leaving.)
  • [18:05:34] * jayabharath_ (~jayabhara@nat/ti/x-cdvgbmfffmzkvsrw) Quit (Remote host closed the connection)
  • [18:06:14] * jayabharath (~jayabhara@nat/ti/x-kabuxlpitbsdbejw) has joined #beagle
  • [18:14:46] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Read error: Connection timed out)
  • [18:15:31] * djlewis (~djelwis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
  • [18:20:34] * Xerion (~xerion@5419A766.cm-5-2c.dynamic.ziggo.nl) has joined #beagle
  • [18:32:27] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [18:50:33] * pbansal (~PBansal@nat/ti/x-wrgkotdpjgbjqqob) has joined #beagle
  • [18:52:16] * chrisw957 (~chris@mail.tacticalelectronics.com) has joined #beagle
  • [18:52:16] * djlewis (~djelwis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Read error: Connection reset by peer)
  • [18:53:54] <prpplague> koen: ping
  • [18:54:12] <koen> prpplague: pong
  • [18:54:22] <koen> prpplague: I'll send you my medical bill
  • [18:54:29] * djlewis (~djelwis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
  • [18:54:30] <koen> prpplague: that *@$(*#($@ beacon blinded me
  • [18:54:35] <koen> :p
  • [18:54:45] <prpplague> koen: hehe
  • [18:55:31] * bteets (81ae5b69@gateway/web/freenode/ip.129.174.91.105) has joined #beagle
  • [18:55:55] <prpplague> koen: added the led drive then?
  • [18:55:59] <koen> yes
  • [18:56:01] <koen> prpplague: http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/meta-texasinstruments/commit/?id=7bab703f4ac28a1982eb9b16eea97330579404c6
  • [18:56:10] <bteets> hey, does anyone know how I can set up the beagleboard to use for asynchronous serial communication?
  • [18:56:32] <koen> prpplague: so beacon will work out of the box as soon as the sd card refreshes
  • [18:56:37] <prpplague> dandy
  • [18:56:56] <koen> provided the eeprom is flashed with the IDs
  • [18:57:00] * koen keeps forgetting that
  • [18:57:23] <prpplague> i need to post that info on flashing the eeprom
  • [18:58:06] <koen> I changed the ws2801 to match beagle
  • [18:58:42] <prpplague> koen: np, i'll pass along an additional patch soon that will setup the stuff in the platform data
  • [18:59:08] <koen> I wanted to get something finished today, so I used the old patch
  • [18:59:39] <koen> the lcd board + beacon now get autodetected and don't require any user intervention to work
  • [18:59:48] <koen> the only thing left is calibration data for the ts
  • [19:00:40] <prpplague> koen: dandy
  • [19:03:09] <prpplague> koen: now i got to finish up the 7 seg driver
  • [19:03:41] * olsen (~sesselast@195.176.0.201) has joined #beagle
  • [19:04:54] * olsen2 (~sesselast@fwe.zhdk.ch) Quit (Ping timeout: 252 seconds)
  • [19:05:50] * rcf (~rcf@53.63-243-81.adsl-dyn.isp.belgacom.be) has joined #beagle
  • [19:09:51] * RCFout (~rcf@53.63-243-81.adsl-dyn.isp.belgacom.be) has joined #beagle
  • [19:11:13] * rcf (~rcf@53.63-243-81.adsl-dyn.isp.belgacom.be) Quit (Ping timeout: 244 seconds)
  • [19:15:48] * bteets (81ae5b69@gateway/web/freenode/ip.129.174.91.105) Quit (Ping timeout: 252 seconds)
  • [19:18:06] <prpplague> koen: you get openocd working yet?
  • [19:18:14] <koen> never tried
  • [19:18:45] <prpplague> bad koen
  • [19:19:01] <djlewis> he was goofing off in texas
  • [19:19:57] <prpplague> djlewis: indeed
  • [19:23:05] * prpplague (~danders@nat/ti/x-lhtyylcqxpxcoipx) Quit (Quit: Leaving)
  • [19:23:25] * prpplague (~danders@nat/ti/x-qhaoyvzupujgxdfw) has joined #beagle
  • [19:36:34] * olsen (~sesselast@195.176.0.201) Quit (Quit: Leaving.)
  • [19:38:55] * chrisw957 (~chris@mail.tacticalelectronics.com) Quit (Ping timeout: 248 seconds)
  • [19:39:48] * panto (~panto@athedsl-4368406.home.otenet.gr) Quit (Read error: Connection timed out)
  • [19:41:35] * virals (~viral@122.179.111.25) Quit (Quit: Leaving.)
  • [19:41:49] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Ping timeout: 240 seconds)
  • [19:56:00] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [19:58:08] * chrisw957 (~chris@mail.tacticalelectronics.com) has joined #beagle
  • [20:03:47] * cipher (~cipher@unaffiliated/cipher) Quit (Read error: Connection reset by peer)
  • [20:06:27] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Ping timeout: 248 seconds)
  • [20:07:05] * panto (~panto@ppp-94-65-59-42.home.otenet.gr) has joined #beagle
  • [20:08:44] * troyl (4dc8390c@gateway/web/freenode/ip.77.200.57.12) has joined #beagle
  • [20:08:50] <troyl> hello all
  • [20:10:04] * fairytale223 (4cb8f4e2@gateway/web/freenode/ip.76.184.244.226) Quit (Ping timeout: 252 seconds)
  • [20:10:12] <troyl> i need help, i've a BBxM connected to an 22" LCD. It's running under Angstrom distrib. how can I manage to set the screen resolution to 1680x1050 ?
  • [20:10:16] * cipher (~cipher@monica.cs.rpi.edu) has joined #beagle
  • [20:10:42] * cipher is now known as Guest28758
  • [20:10:57] <troyl> I've do the setup in uEnv.txt to add the boot argument to manage this but the resolution is automatically set to 1400x1050 instead of my wanted 1680x1050
  • [20:11:43] * Zoxc (Zoxc@ti0128a380-dhcp0301.bb.online.no) Quit ()
  • [20:12:04] <troyl> please i need help about this
  • [20:15:37] <troyl> hi all
  • [20:16:58] <troyl> is it possible for the beagleboard xm to have a screen resolution of 1680x1050 ? If yes, how is it possible ? When I set this mode in my bootargs, the resolution automtically switch to 1400x1050
  • [20:22:20] <djlewis> this came up a couple days back. I tried 1680x1050 on my revC2.
  • [20:22:32] <djlewis> Th3e revC2 will do it and the monitor but not together
  • [20:22:49] <djlewis> I settled for the next lower wide screen rez
  • [20:23:04] <djlewis> 1440x900 iirc
  • [20:23:18] <troyl> 1440x900 isn't supported by my screen
  • [20:23:23] <djlewis> ugh
  • [20:23:48] <djlewis> do you get a good image with what does work?
  • [20:23:52] <troyl> that I don't understand is why the resolution automatically switch to 1400x1050 (a 4:3 aspect)
  • [20:24:06] <troyl> with the demo image
  • [20:24:46] <djlewis> anyone?
  • [20:25:12] <troyl> with bootargs settled to dvi mode 1680x1050MR-16@60
  • [20:30:18] <troyl> Can be managed if i down the refresh rate ?
  • [20:31:49] <troyl> one more detail : my monitor is connected on its dvi port with an hdmi to dvi adapter
  • [20:34:18] <djlewis> If you got a good screen at whatever rez then the cable should be fine
  • [20:35:32] <troyl> with hd720 it works great
  • [20:35:45] <troyl> but I really need a resolution of 1680x1050
  • [20:40:39] <_av500_> 1680x1050@60fps is out of spec for the omap3
  • [20:40:52] <_av500_> limit is at 720p
  • [20:42:10] <_av500_> limitation of the max pixel clock in the dss
  • [20:42:11] <troyl> but at 1400x1050 it's work great (but the aspect is 4/3 instead of 16/9)
  • [20:42:32] <_av500_> troyl: enable all the dss debug and watch the logs
  • [20:42:44] <_av500_> it should tell you why it falls back to that res
  • [20:42:51] <_av500_> dss debug and omapfb debug
  • [20:43:04] <troyl> if I downgrade the refresh rate, will it work ?
  • [20:43:19] <_av500_> you monitor is unlikely to accept it
  • [20:43:25] <_av500_> but you can try of course
  • [20:43:34] <_av500_> some ppl could do 1920x1080 at 24fps
  • [20:43:42] <troyl> how enable these logs ?
  • [20:43:49] <_av500_> kernel command line
  • [20:44:03] <_av500_> dunno the exact syntax, google does
  • [20:44:10] <troyl> I want this resolution because the screen is smoothed in 1280x720
  • [20:44:55] <_av500_> understood
  • [20:45:28] <_av500_> but i recall 1680x1050 as not working in the past
  • [20:45:56] <troyl> really bad news for me
  • [20:46:00] <_av500_> otoh i recall that tomba had a trick to make 1600x1200 work
  • [20:48:05] <troyl> ok, so I have to wait the raspberry pi
  • [20:48:53] <troyl> lol
  • [20:49:21] <troyl> is there anyone board at this price that can have this resolution ?
  • [20:54:01] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Quit: Leaving)
  • [20:57:26] * rcranetx (~rcranetx@nat/ti/x-imyrgzxfvkuahyww) Quit (Quit: Leaving.)
  • [20:59:53] <djlewis> troyl: http://www.flickr.com/photos/thyboo/3896287908/ not so good
  • [21:01:48] <troyl> ok, it's definetly impossible to have this rez work on this boad
  • [21:01:55] <_av500_> no
  • [21:02:01] <_av500_> as said there was that trick
  • [21:02:06] <_av500_> but tomba is asleep :)
  • [21:02:45] <mru> you hire one former nokia engineer per pixel to paint them for you
  • [21:03:53] <_av500_> mru: aiui, there is a /2 divider inthe pixel clock chain that the trm says is needed but you can put it to /1
  • [21:03:54] <troyl> lol but on this photo, it don't take all the screen
  • [21:04:03] <_av500_> mru: hence you double the pixel clock
  • [21:04:15] <mru> you can't do scaling then
  • [21:04:27] * ka6sox is now known as zz_ka6sox
  • [21:05:32] <_av500_> mru: true
  • [21:10:48] <troyl> what are the 16/9 rez bigger than 1280x1024 and under 1680x1050 ?
  • [21:11:14] <_av500_> 720p
  • [21:11:25] <_av500_> but its not bigger
  • [21:11:31] * joelagnel (~joel@cpe-76-184-244-226.tx.res.rr.com) Quit (Ping timeout: 276 seconds)
  • [21:12:02] <damjan> 1440x810 :)
  • [21:12:29] <troyl> 720p is not 1280x1024 ?
  • [21:12:29] <mru> any NxM such that N/M = 16/9 and 1280<N<1680
  • [21:12:43] <mru> if it were, why would it be called 720?
  • [21:12:45] <djlewis> so 1440x900 will have to do ya ;)
  • [21:13:41] <troyl> is 1440x900 supported by the bb ?
  • [21:13:49] <djlewis> is on mine :)
  • [21:13:49] <mru> or get a monitor that isn't do damn fussy
  • [21:14:13] <djlewis> troyl: i mentioned earlier I had to settle for that over 1680x1050
  • [21:14:25] * prpplague (~danders@nat/ti/x-qhaoyvzupujgxdfw) Quit (Quit: Leaving)
  • [21:14:54] * under (~under@adsl-ull-206-205.40-151.net24.it) has joined #beagle
  • [21:14:57] <under> Hi
  • [21:15:07] <troyl> ok but i 've a doubt in already try this rez but my monitor doesn't support
  • [21:15:12] <troyl> it's samsung b2240mw
  • [21:15:16] <troyl> 22"
  • [21:15:26] <under> My beagleboard cant boot. how can i do?
  • [21:16:14] <_av500_> it can boot
  • [21:16:34] <_av500_> so far they boot unless you applied 12V
  • [21:16:36] <under> it doesnt send any signal
  • [21:16:42] <djlewis> under: follow links for Beagleboard for Beginners at beagleboard.org
  • [21:16:43] <under> to tv via hdmi
  • [21:16:59] <_av500_> under: connect the serial first
  • [21:17:06] <_av500_> and make sure that works
  • [21:17:18] <under> ok
  • [21:17:31] * joelagnel (~joel@cpe-76-184-244-226.tx.res.rr.com) has joined #beagle
  • [21:17:33] <_av500_> and follow all the beginners stuff
  • [21:19:10] <troyl> I've understand how I can set the psplash screen but how to change the boot logo (beagleboard.org) ?
  • [21:19:17] <troyl> by recompile u-boot ?
  • [21:19:57] <_av500_> leave the logo, do some real work
  • [21:20:32] <under> _av500_, btw, the led on board works
  • [21:20:38] <troyl> it's for a commercial project ...
  • [21:21:04] <troyl> all the coding of my gtk is terminated
  • [21:21:36] <troyl> I need to launch this product before the launch of the raspberry pi so I'm seeking solutions
  • [21:24:41] <thurbad> the beagle logo is in the kernel
  • [21:25:14] <under> for serial connection, there are instruction for linux only, I've windows -.-
  • [21:25:56] <troyl> you have to use hypertrm on windows
  • [21:26:00] <_av500_> windows can do serial too
  • [21:26:03] <_av500_> since win3.11
  • [21:26:12] * benmcnelly (~ben@adsl-99-38-78-150.dsl.spfdmo.sbcglobal.net) Quit (Quit: Leaving.)
  • [21:27:53] <under> I talked about instructions
  • [21:28:14] <_av500_> copying stuff to SD cards work in windows too
  • [21:28:27] <_av500_> or just copy a demo image to a card
  • [21:28:58] <_av500_> http://www.angstrom-distribution.org/demo/beagleboard/
  • [21:29:30] <_av500_> http://www.angstrom-distribution.org/demo/beagleboard/sd-images/2gb/
  • [21:29:53] <troyl> thurbad : by installing debian on the beagleboard, the beagleboard.org logo will disappear ?
  • [21:30:14] <_av500_> a debian logo might appear
  • [21:30:18] <troyl> ok great
  • [21:30:27] <_av500_> those pesky logos
  • [21:30:51] <troyl> it greater for a commercial product to leave this logo
  • [21:30:59] <troyl> to hide this logo
  • [21:31:03] <_av500_> you can also recompile the angstrom kernel and drop the logo
  • [21:31:14] <under> _av500_, just format sd, extract bz2 and copy stuff into sd?
  • [21:31:57] <troyl> I don't know how to recompile the kernel
  • [21:32:45] <troyl> and I don't know where in the source code the logo is
  • [21:33:24] <_av500_> its a config optio
  • [21:34:41] <troyl> the kernel is uImage ?
  • [21:35:04] <_av500_> yes
  • [21:35:39] <troyl> ok, I've to learn how to compile a kernel
  • [21:36:14] <troyl> I've a bug in angstrom
  • [21:36:22] <troyl> at the startup of Gnome
  • [21:36:25] <troyl> with auto login
  • [21:36:49] <troyl> The screen go in sleep mode and I've to press a key to continue gdm to launch the desktop
  • [21:36:51] <troyl> any idea ?
  • [21:37:05] <_av500_> i dont do gnome
  • [21:37:19] <troyl> ok
  • [21:37:28] <under> _av500_, just format sd, extract bz2 and copy stuff into sd?
  • [21:38:15] * brma (~brma@187.78.134.55) Quit (Ping timeout: 258 seconds)
  • [21:38:19] <_av500_> under: yes, the ~300MB one
  • [21:38:49] <under> sure, the sd-image
  • [21:38:57] <troyl> there is a script to make this sd
  • [21:39:23] <under> yes?
  • [21:39:29] <_av500_> troyl: no need for the script if you dd the image
  • [21:39:52] <under> maybe he talks about the script to format it
  • [21:39:53] <troyl> ok, sorry
  • [21:40:10] <troyl> yes, to print the partition table on the sd
  • [21:40:12] <under> mkcard.txt this
  • [21:40:21] <_av500_> if you ddd the image you dont need that
  • [21:40:23] <_av500_> dd
  • [21:40:31] <troyl> true
  • [21:40:51] <under> ovviusly a LINUX SCRIPT -.-
  • [21:41:15] <_av500_> under: yes
  • [21:41:20] <_av500_> sucks to be windows
  • [21:42:05] <troyl> under: donwload ubuntu live cd, you'll win time
  • [21:42:17] <under> troyl, I did, it wont boot!
  • [21:42:38] <djlewis> didnt create iso image on cd?
  • [21:43:22] <under> cd??
  • [21:43:29] <_av500_> cd?
  • [21:43:32] <_av500_> what is that?
  • [21:43:33] * jayabharath (~jayabhara@nat/ti/x-kabuxlpitbsdbejw) Quit (Quit: jayabharath)
  • [21:43:48] <under> what you mean bro?
  • [21:43:55] * djlewis sticks tongue out at _av500_
  • [21:44:16] <_av500_> djlewis: cds is what you hang in the field to scare birds, no?
  • [21:44:24] <djlewis> lol
  • [21:44:25] <troyl> lol
  • [21:44:42] <_av500_> moight make them angry in fact
  • [21:45:07] <troyl> under: buy an arduino
  • [21:45:30] <under> why?
  • [21:46:17] <troyl> what would you do with the beagleboard ?
  • [21:47:03] <under> just view a little web page in my shop
  • [21:47:16] <under> on a monitor ovviously
  • [21:51:23] <_av500_> under: then run the demo image
  • [21:51:29] <_av500_> that should be fine for your use case
  • [21:52:05] <under> this? Angstrom-Beagleboard-demo-image-glibc-ipk-2010.3-beagleboard.sd-image-2GiB.img.bz2
  • [21:53:05] <troyl> yes
  • [21:53:37] <under> ok, in wich filesystem have I format the sd?
  • [21:54:24] <troyl> tomba ? sleeping ?
  • [21:54:47] <troyl> no need
  • [21:55:18] <under> what? :D
  • [21:55:37] <_av500_> under: you unzip the bz2
  • [21:55:44] <_av500_> and you dd it to the card
  • [21:55:51] <_av500_> starting from sector 0
  • [21:55:57] <_av500_> its a full image
  • [21:56:00] <_av500_> like an .iso
  • [21:56:10] <under> do have i to format it?
  • [21:56:19] <under> first
  • [21:56:23] <troyl> no need to format the sd card, dd will burn it raw directly
  • [21:56:34] <under> ok, got it
  • [21:56:59] <troyl> I can sell you pre-installed sd card..... lol
  • [21:57:20] <under> i think i can do this lol
  • [21:57:32] <troyl> lol I wish
  • [21:57:51] <under> thanks
  • [21:58:25] <troyl> after that, find me a trick to make my bb works at 1680x1050 rez
  • [21:59:35] <_av500_> troyl: ask to tomba during the day
  • [21:59:40] <troyl> ok
  • [22:00:30] <troyl> ok, thank you very much for your help
  • [22:00:47] <troyl> bye
  • [22:00:54] <under> thanks bye
  • [22:01:08] * novogrammer (~novogramm@w0109-49-134-102-75.uqwimax.jp) Quit (Remote host closed the connection)
  • [22:01:40] * eagle (556c27e2@gateway/web/freenode/ip.85.108.39.226) has joined #beagle
  • [22:02:01] * troyl (4dc8390c@gateway/web/freenode/ip.77.200.57.12) Quit ()
  • [22:02:43] * Darren (~darreneth@nat/ti/x-uvqoorhowxflokkv) Quit (Ping timeout: 252 seconds)
  • [22:06:10] * bgamari__ (~ben@physicsnat56.physics.umass.edu) has joined #beagle
  • [22:06:24] * bgamari__ (~ben@physicsnat56.physics.umass.edu) has left #beagle
  • [22:09:55] * kevinsc1 (~a0214685@nat/ti/x-vnknflaqcgqkpzii) has joined #beagle
  • [22:12:33] * kevinsc (~a0214685@nat/ti/x-sfqqrdhsqyygeyda) Quit (Ping timeout: 255 seconds)
  • [22:21:10] * panto (~panto@ppp-94-65-59-42.home.otenet.gr) Quit (Quit: Leaving)
  • [22:48:05] * eagle (556c27e2@gateway/web/freenode/ip.85.108.39.226) Quit (Quit: Page closed)
  • [22:50:35] * under (~under@adsl-ull-206-205.40-151.net24.it) Quit (Quit: Leaving)
  • [22:55:34] <ds2> do not stare into the beacon with the remaining eye.
  • [23:01:23] <djlewis> later . . .
  • [23:01:34] * djlewis (~djelwis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Quit: Leaving.)
  • [23:09:06] * rsalveti (~rsalveti@linaro/rsalveti) Quit (Quit: Coyote finally caught me)
  • [23:09:34] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Quit: Verlassend)
  • [23:22:54] * contempt (contempt@unaffiliated/contempt) Quit (Quit: leaving)
  • [23:23:36] * contempt (contempt@unaffiliated/contempt) has joined #beagleboard
  • [23:23:36] * contempt (contempt@unaffiliated/contempt) has joined #beagle
  • [23:27:03] * dbr (86799e30@gateway/web/freenode/ip.134.121.158.48) has joined #beagle
  • [23:27:56] <dbr> If I recompile the kernel on my host pc, what files do I put on the beagleboard SD card and where should they go?
  • [23:33:25] <ds2> anywhere you like
  • [23:33:46] <ds2> just adjust your bootloader as appropriate
  • [23:36:26] <dbr> do I need to do more than replace the uImage file?
  • [23:37:41] <ds2> only if you want to
  • [23:37:50] <ds2> or if you are using a incompatible kernel
  • [23:37:58] <ds2> or ....
  • [23:39:12] <dbr> I replace the uImage file in my boot partition with the newly compiled uImage, then when I boot, it stills shows the kernel as being the old one
  • [23:40:30] * rcranetx (~rcranetx@nat/ti/x-jqxcufuxnueqnnlz) has joined #beagle
  • [23:50:44] * BlInK311 (~Ward@ool-ad03430c.dyn.optonline.net) has joined #beagle
  • [23:51:14] * killring (~killring@76.226.207.91) Quit (Quit: leaving)
  • [23:56:53] * gustavoz (~gustavoz@host49.186-109-136.telecom.net.ar) Quit (Quit: Leaving)
  • [23:58:05] * kevinsc1 (~a0214685@nat/ti/x-vnknflaqcgqkpzii) Quit (Quit: Leaving.)