• [00:00:02] * tegila (~tegila@189-041-118-233.xd-dynamic.ctbcnetsuper.com.br) has joined #beagle
  • [00:23:19] <jkridner|work1> hi dm8tbr
  • [00:23:54] <jkridner|work1> I provided a GRF, to the best of my understanding of what one is.
  • [00:23:55] * thaytan (~jan@59.167.167.201) Quit (Ping timeout: 260 seconds)
  • [00:27:08] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [00:45:03] <ds2> hmmmm
  • [00:45:10] <ds2> jkridner|work1: ping
  • [00:52:21] <dmajnem2> my beagle board seems to just hang :/
  • [00:52:26] <dmajnem2> any ideas?
  • [00:54:19] <dmajnem2> http://pastebin.com/P1t514su
  • [00:54:54] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) has joined #beagle
  • [01:03:59] <mrsteveman1> dmajnem2: is that a custom kernel
  • [01:05:20] <dmajnem2> mrsteveman1: I do not think so
  • [01:05:26] <dmajnem2> should be debian
  • [01:05:31] <mrsteveman1> ah ok
  • [01:05:39] <mrsteveman1> it just hangs? what is it doing at the time
  • [01:05:50] <rcn-ee> dmajnem2, it's "not ready" since it hangs..
  • [01:06:01] <dmajnem2> the nic never kicks in
  • [01:06:02] <rcn-ee> sr1.5 for dvfs is not upstream
  • [01:06:09] <dmajnem2> it seems to just stop
  • [01:06:15] <rcn-ee> what board?
  • [01:06:22] <dmajnem2> rev A IIRC
  • [01:06:36] <dmajnem2> xM Rev A
  • [01:06:47] <dmajnem2> at least, that is what the bootloader tells me
  • [01:07:04] <rcn-ee> it has a label on it. ;) which kernel is trying to boot?
  • [01:07:57] * leming (~leming@c-67-164-174-68.hsd1.co.comcast.net) has joined #beagle
  • [01:08:01] <rcn-ee> do you have a full boot log you can share?
  • [01:08:15] <rcn-ee> it's missing the more important stuff.
  • [01:09:06] <dmajnem2> rcn-ee: I will get one
  • [01:09:17] <rcn-ee> cool....
  • [01:09:20] <dmajnem2> It says xM on the board, I do not see where it says the revision
  • [01:09:42] <rcn-ee> there's an A, B, or C sticker next to the 2 usb ports on the side
  • [01:09:47] <rcn-ee> next to the two buttons
  • [01:10:44] <dmajnem2> there seems to be nothing on that sticker
  • [01:11:00] <dmajnem2> however, when on the flip side of the board, I do see REV B on the PCB itself
  • [01:11:22] <rcn-ee> that would be a first..
  • [01:11:31] <rcn-ee> the board isn't white is it?
  • [01:12:11] <dmajnem2> quite red
  • [01:12:26] <dmajnem2> the funny thing is, it used to boot just fine
  • [01:12:37] <rcn-ee> what did you change?
  • [01:12:50] <dmajnem2> other people use the device, I wish I knew
  • [01:13:14] <rcn-ee> ah, that happens...
  • [01:13:31] <dmajnem2> full log: http://pastebin.com/LtvD8930
  • [01:13:47] <rcn-ee> thanks
  • [01:14:50] <ds2> is that why it turned red?
  • [01:14:57] <rcn-ee> ah i think i see it.. you've always used the serial port right?
  • [01:15:04] <ds2> Does the entire board glow?
  • [01:15:43] <dmajnem2> rcn-ee: always that serial port, yes
  • [01:16:01] <rcn-ee> getty will run to start the login prompt, but it's probally still setup for /dev/ttyS2.. you need to modify /etc/inittab to use /dev/ttyO2..
  • [01:16:11] <rcn-ee> where you running 2.6.35 before?
  • [01:16:37] <dmajnem2> perhaps, I would believe it
  • [01:17:43] <rcn-ee> i'd mount the card in a pc, as it's pretty hard to modify in the beagle at the moment.. change: "S:2345:respawn:/sbin/getty 115200 ttyS2" -> ttyO2 (O=omap)
  • [01:20:03] <rcn-ee> btw, it also looks like you might be missing the modules as it didn't load the smsc95xx driver.. so double check /lib/modules/2.6.37.3-x4/ exists..
  • [01:25:21] <dmajnem2> when I stick the mmc into my machine, I can only mount the vfat partition
  • [01:25:41] <dmajnem2> e.g., the first partition
  • [01:25:44] * liu (7d47e7ce@gateway/web/freenode/ip.125.71.231.206) has joined #beagle
  • [01:25:53] <dmajnem2> for whatever reason, it does not want to mount the second partition
  • [01:26:35] <rcn-ee> weird.. i've seen 8Gb card's take awhile..
  • [01:27:02] <rcn-ee> it might be running fsck on it..
  • [01:27:11] <rcn-ee> otherwise, anything odd in dmesg?
  • [01:27:36] * prpplague^2 is now known as prpplague
  • [01:29:04] <dmajnem2> figured it out, just some weirdness on the machine
  • [01:30:06] <dmajnem2> I am in inittab but do not see the line you suggest
  • [01:30:17] <dmajnem2> there is no "S:" anywhere in inittab
  • [01:30:22] <rcn-ee> it might not be exactly...
  • [01:30:26] <rcn-ee> search for a ttyS2
  • [01:30:31] <dmajnem2> none
  • [01:30:42] * kaio (~kaio@27-33-161-52.static.tpgi.com.au) has joined #beagle
  • [01:30:42] * kaio (~kaio@27-33-161-52.static.tpgi.com.au) Quit (Changing host)
  • [01:30:42] * kaio (~kaio@fedora/kaio) has joined #beagle
  • [01:30:45] <rcn-ee> humm.. is there a ttyO2 then?
  • [01:30:48] * liu (7d47e7ce@gateway/web/freenode/ip.125.71.231.206) Quit (Ping timeout: 252 seconds)
  • [01:30:58] <dmajnem2> ah, that is because I am slighty dumb
  • [01:31:26] <dmajnem2> "/etc/inittab" != "etc/inittab"
  • [01:31:28] * dmajnem2 sighs
  • [01:31:49] <dmajnem2> there is an O2 already in there
  • [01:31:49] <rcn-ee> yeah, careful don't edit the wrong file..
  • [01:32:06] * liu (7d47e7ce@gateway/web/freenode/ip.125.71.231.206) has joined #beagle
  • [01:32:16] <dmajnem2> T2:23:respawn:/sbin/getty -L ttyO2 115200 vt102
  • [01:32:19] <rcn-ee> crap, then it should work..
  • [01:35:05] <rcn-ee> in the fat parition, are you lucky enought to have an uImage_old/uInitrd_old?
  • [01:35:15] <dmajnem2> let me check
  • [01:35:44] <dmajnem2> I have both
  • [01:36:19] <rcn-ee> well that's good, my install script generates them in a working system, so if you rename them back to uImage/uInitrd, they should boot correctly..
  • [01:38:31] <dmajnem2> renamed, testing it out
  • [01:38:35] * kaio (~kaio@fedora/kaio) Quit (Ping timeout: 276 seconds)
  • [01:39:35] * rcranetx (~rcranetx@nat/ti/x-lscsozwqoquiggsi) has joined #beagle
  • [01:40:35] <dmajnem2> same deal
  • [01:40:36] <liu> yesterday.i tried the angstorm ,it can`t boot.now i`m trying the Android...:(
  • [01:40:54] <dmajnem2> rcn-ee: stops in the same "mmcblk0: p1 p2 < p5 p6 >" place
  • [01:41:28] * kaio (~kaio@fedora/kaio) has joined #beagle
  • [01:41:44] <liu> dmajnem2,are you trying to boot the Angstrom??
  • [01:42:43] <rcn-ee> dmajnem2, after that part it should try to load the filesystem: "EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)"... very weird..
  • [01:44:16] <liu> why i stopped at the ANDROID logo..???:(
  • [01:44:40] <liu> it`s about 10 minutes...
  • [01:45:30] <rcn-ee> liu i think you'l have better luck on #rowboard not a lot of android users here...
  • [01:45:41] <rcn-ee> #rowboat ... sorry..
  • [01:46:08] <liu> ok ,thanks:)
  • [01:47:15] <rcn-ee> dmajnem2, i'm generating a new uImage/modules i'd like you try.... just waiting for it to finish..
  • [01:48:00] <dmajnem2> rcn-ee: thanks :)
  • [01:49:58] * raster (raster@enlightenment2.osuosl.org) has joined #beagle
  • [01:49:58] * raster (raster@enlightenment2.osuosl.org) Quit (Changing host)
  • [01:49:58] * raster (raster@enlightenment/developer/raster) has joined #beagle
  • [01:52:40] * heathkid (~heathkid2@108.114.78.213) has joined #beagle
  • [01:53:09] * heathkid (~heathkid2@108.114.78.213) has left #beagle
  • [01:53:19] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) has joined #beagle
  • [01:53:52] * liu (7d47e7ce@gateway/web/freenode/ip.125.71.231.206) Quit (Ping timeout: 252 seconds)
  • [01:54:45] * ZeZu (~null@c-98-227-57-1.hsd1.in.comcast.net) has joined #beagle
  • [01:55:25] * W1N9Zr0 (~W1N9Zr0@69-165-245-171.cable.teksavvy.com) Quit (Remote host closed the connection)
  • [01:58:48] * tegila (~tegila@189-041-118-233.xd-dynamic.ctbcnetsuper.com.br) Quit (Quit: Leaving.)
  • [02:00:55] * jevin_ (~jevin@c-24-13-122-228.hsd1.in.comcast.net) Quit (Quit: jevin_)
  • [02:03:05] * emeb (~ericb@ip70-190-178-49.ph.ph.cox.net) Quit (Quit: Leaving.)
  • [02:03:36] <rcn-ee> dmajnem2, okay uImage and modules here: http://rcn-ee.homeip.net:81/testing/2.6.38/ (it'll be a little slow, cable internet) Copy the uImage to the fat partition as uImage and untar the modules into the rootfs as root.. don't worry about the uInitrd, it'll get ignored..
  • [02:04:54] <rcn-ee> i'm wondering if this will be better able to find the rootfs partition, or we may just have to add "rootfstype=ext3" to the bootargs
  • [02:05:22] <dmajnem2> downloading it now
  • [02:08:46] <dmajnem2> rcn-ee: sorta off topic, but I noticed on your blog that you managed to get your hands on a pandaboard
  • [02:09:03] <dmajnem2> how did you accomplish that? they seem sold out
  • [02:09:28] * BlInK311 (~Ward@ool-44c42324.dyn.optonline.net) has joined #beagle
  • [02:09:30] <rcn-ee> actually i picked up #3 yesterday... ;)
  • [02:09:37] <rcn-ee> digikey was showing stock till about noon today, but all sold out again..
  • [02:10:48] <rcn-ee> they usually get a shipment every week, so check tuesday afternoon's when the in stock counter gets updated..
  • [02:11:28] <dmajnem2> oh, cool
  • [02:11:31] <dmajnem2> I will be sure to do that
  • [02:12:06] * thurbad (~nate@rrcs-97-79-173-242.sw.biz.rr.com) has joined #beagle
  • [02:16:28] * iry (~irytwo@99-25-90-177.lightspeed.hstntx.sbcglobal.net) has joined #beagle
  • [02:19:00] <dmajnem2> rcn-ee: I replaced the uImage on the vfat partition, do I need to do anything to the ext partition regarding the uImage file?
  • [02:19:39] <rcn-ee> nope... the uImage will load modules from /lib/modules/2.6.xxx thou.. so untarring the modules in the ext partition will take care of that..
  • [02:20:04] <dmajnem2> ok, cool
  • [02:21:11] <thurbad> how long should mtest run in u-boot normally?
  • [02:21:43] <thurbad> it seems to still be on it's first pattern
  • [02:21:57] <dmajnem2> rcn-ee: going to try booting it up now
  • [02:22:11] <rcn-ee> cool
  • [02:22:59] * BlInK311 (~Ward@ool-44c42324.dyn.optonline.net) Quit (Quit: Leaving)
  • [02:23:56] <thurbad> nevermind, I suppose it helps to give it an address
  • [02:24:00] * djerome (~djerome@ip24-251-138-141.ph.ph.cox.net) has joined #beagle
  • [02:24:13] * jevin_ (~jevin@c-24-13-122-228.hsd1.in.comcast.net) has joined #beagle
  • [02:24:53] <dmajnem2> rcn-ee: still sadness, copying the log over
  • [02:25:31] <rcn-ee> dang it just doesn't like that partition..
  • [02:25:46] <dmajnem2> http://pastebin.com/2WBDGGnT
  • [02:26:17] * W1N9Zr0 (~W1N9Zr0@69-165-245-171.cable.teksavvy.com) has joined #beagle
  • [02:26:40] <rcn-ee> humm... this time it didn't even find it...
  • [02:27:50] <rcn-ee> what brand is that 16Gb sd card?
  • [02:28:02] <rcn-ee> (the biggest i have are 4Gb's)
  • [02:28:04] <dmajnem2> "kingmax"
  • [02:28:38] <dmajnem2> I have another SD card with the previous kernel that seems to fail in the same way
  • [02:30:25] <dmajnem2> the other SD is a 4 GB one
  • [02:31:13] <dmajnem2> woah, my apologies
  • [02:31:27] <dmajnem2> 16GB patriot
  • [02:32:22] <dmajnem2> 8GB kingmax
  • [02:32:27] <dmajnem2> 4GB kingston
  • [02:33:52] <rcn-ee> i've had good luck with 2gb patriot's.. mostly have 4gb sandisk.. i'll give one of those 16gb patroit's on amazon a try and see if i run into the same problem..
  • [02:35:00] * Haikarainen (~Haikarain@c-0870e155.98-5-64736c10.cust.bredbandsbolaget.se) Quit (Read error: Connection reset by peer)
  • [02:36:09] <dmajnem2> I am trying the kingston
  • [02:36:49] <dmajnem2> the kingston came with the beagleboard so if anything might work...
  • [02:37:56] <dmajnem2> no dice
  • [02:37:58] <dmajnem2> uploading log
  • [02:38:40] * alancam (~alancam@nat/ti/x-cpmtrfqsjsfrjtrp) has joined #beagle
  • [02:39:25] <dmajnem2> rcn-ee: http://pastebin.com/ddfC6zkK
  • [02:40:19] <rcn-ee> yeah it just doesn't find the mmc card weird.. Can you give this demo image that i uploaded earlyier today a try: http://elinux.org/BeagleBoardUbuntu#Natty_11.04_2
  • [02:40:46] <dmajnem2> sure, I need to relocate from this lab tho
  • [02:40:55] <rcn-ee> on the 4gb kingston that came with the board.. hopefully you dont' have anythign special on it..
  • [02:41:41] <dmajnem2> I have all my code on a git repo
  • [02:48:12] * mrc3 (~ddiaz@189.157.121.77) Quit (Read error: Operation timed out)
  • [02:57:31] * brolin (~brolin@190.250.242.105) has joined #beagle
  • [03:00:01] * dmajnem2 (~dmajnem2@ng.acm.uiuc.edu) Quit (Quit: Lost terminal)
  • [03:03:23] * mrc3 (~ddiaz@189.157.120.178) has joined #beagle
  • [03:05:04] * beagle2 (80775b0d@gateway/web/freenode/ip.128.119.91.13) has joined #beagle
  • [03:05:13] <beagle2> does anyone know how to fix the lag issue with my openCV program?
  • [03:05:26] <beagle2> i have it on super-low resolution, and the fps seems to be rather smooth,
  • [03:05:48] <beagle2> but my output lags a good few hundred miliseconds behind...
  • [03:11:22] <thurbad> maybe cut the buffer size?
  • [03:13:11] <thurbad> not familiar with opencv, but that's what you generally do in video processing.... lag vs fluidity is what you're juggling
  • [03:13:44] * mrc3 (~ddiaz@189.157.120.178) Quit (Read error: Operation timed out)
  • [03:14:51] * drunknbass (~drunknbas@76.91.255.83) has joined #beagle
  • [03:20:39] <beagle2> hmmm, i'm not sure how i'd go about doing that in openCV...but thanks for tip
  • [03:24:17] * matthsu_ (~matt@61.30.10.70) Quit (Quit: Lost terminal)
  • [03:25:31] * mrc3 (~ddiaz@189.157.119.222) has joined #beagle
  • [03:25:52] * GPSFan (~kenm@64.92.145.112) Quit (Remote host closed the connection)
  • [03:31:41] * mrc3 (~ddiaz@189.157.119.222) Quit (Ping timeout: 240 seconds)
  • [03:37:30] * bazbell (~a0192809@nat/ti/x-hcdqumdqhplmonrt) has joined #beagle
  • [03:38:47] * beagle2 (80775b0d@gateway/web/freenode/ip.128.119.91.13) Quit (Ping timeout: 252 seconds)
  • [03:43:59] * mrc3 (~ddiaz@189.157.113.181) has joined #beagle
  • [03:49:23] * mrc3 (~ddiaz@189.157.113.181) Quit (Ping timeout: 246 seconds)
  • [03:54:46] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) has joined #beagle
  • [03:56:28] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [03:57:11] * ZeZu (~null@c-98-227-57-1.hsd1.in.comcast.net) Quit (Ping timeout: 240 seconds)
  • [04:00:04] * alancam (~alancam@nat/ti/x-cpmtrfqsjsfrjtrp) Quit (Ping timeout: 248 seconds)
  • [04:01:01] * kaio (~kaio@fedora/kaio) Quit (Ping timeout: 250 seconds)
  • [04:01:33] * Beagle5 (~Beagle5@pool-173-77-110-37.nycmny.east.verizon.net) has joined #beagle
  • [04:01:45] <Beagle5> hi
  • [04:02:09] * mrc3 (~ddiaz@189.157.107.176) has joined #beagle
  • [04:02:16] <Beagle5> can anyone provide a link for the latest 4gb mmc image
  • [04:03:29] * kaio (~kaio@fedora/kaio) has joined #beagle
  • [04:03:53] * jeremychang (~jeremy@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [04:05:04] * Beagle5 (~Beagle5@pool-173-77-110-37.nycmny.east.verizon.net) Quit (Client Quit)
  • [04:05:49] * ZeZu (~null@c-98-227-57-1.hsd1.in.comcast.net) has joined #beagle
  • [04:07:14] <hitlin37> image of what?
  • [04:07:28] * matthsu (~matt@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [04:25:57] * borillion (~borillion@96.24.74.130) has joined #beagle
  • [04:31:34] * NotTooDumb3 (~vayavya@122.166.13.141) has joined #beagle
  • [04:35:18] * NotTooDumb3 (~vayavya@122.166.13.141) Quit (Client Quit)
  • [04:39:15] * matthsu (~matt@61-30-10-70.static.tfn.net.tw) has left #beagle
  • [04:40:37] * borillion (~borillion@96.24.74.130) has left #beagle
  • [04:44:38] * ZeZu (~null@c-98-227-57-1.hsd1.in.comcast.net) Quit (Ping timeout: 240 seconds)
  • [04:52:08] * djerome (~djerome@ip24-251-138-141.ph.ph.cox.net) Quit (Quit: Leaving)
  • [05:13:07] * l4 (~l4@88.119.128.50) has joined #beagle
  • [05:17:56] * jpirko (~jirka@ip-94-112-98-100.net.upcbroadband.cz) has joined #beagle
  • [05:19:35] * brolin (~brolin@190.250.242.105) Quit (Quit: leaving)
  • [05:21:38] * mrc3 (~ddiaz@189.157.107.176) Quit (Read error: Connection reset by peer)
  • [05:22:22] <_av500_> here it is: http://images.priceme.co.nz/Images/ProductImages/StRetailer13/00000000000000000000000-sdfkenokdsma8s8w-92i_m.jpg
  • [05:32:40] <hitlin37> av500,i have seen this on andriod that clock does not increase by default when i run my app...i can do this in terminal...but any idea why its not moving from 300mhz to 1 ghz
  • [05:33:32] <hitlin37> should i call something from my app that can give cpu an indication to increase cpu
  • [05:33:42] <thurbad> man, if my boot problem is amperage related I'm gonna go postal tomorrow....
  • [05:34:27] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [05:34:38] <thurbad> should say... remaining boot problem as I've squashed a couple of issues
  • [05:35:24] <thurbad> wish I knew for sure how many amps our board needs for certain ~.~
  • [05:36:56] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [05:37:25] <iry> hrm?
  • [05:37:44] <iry> the beagleboard it self?
  • [05:38:34] <thurbad> no, custom board originally based on the beagle
  • [05:38:52] <iry> ah
  • [05:39:16] <iry> I guess you cant jury rig some wires to measure the in then
  • [05:43:11] * kaio (~kaio@fedora/kaio) Quit (Ping timeout: 276 seconds)
  • [05:43:27] <thurbad> nope, traveling at the moment so I don't even have a multimeter
  • [05:44:05] <iry> that's no fun
  • [05:44:27] <_av500_> thurbad: what issues remain?
  • [05:44:41] <_av500_> xload and uboot load?
  • [05:48:30] <thurbad> the system hangs after it uncompresses the kernel
  • [05:48:50] <thurbad> I got the machine ID matched up, so it's not that
  • [05:51:34] <thurbad> I've got low level kernel debugging enabled but nothing prints after "done, booting the kernel"
  • [05:53:31] <_av500_> hmm
  • [05:53:46] <_av500_> well, then start with more printks
  • [05:53:49] <_av500_> step after step
  • [05:54:00] <ds2> CONFIG_GALLOWS=n
  • [05:55:38] <_av500_> thurbad: and/or use jtag to see what happens
  • [05:56:35] <thurbad> don't have a jtag, never used one before either :/
  • [05:56:48] <ds2> are you screwing with the pinmux, memory settings, or clocks at a very eary stage?
  • [05:57:17] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) Quit (Read error: Connection reset by peer)
  • [05:57:32] <thurbad> haven't played with clocks or memory settings yet
  • [05:57:34] <ds2> there isn't that much code that can cause this.
  • [05:57:50] <ds2> do you have sane clocks and memory settings from the bootloader?
  • [05:58:22] * matthsu (~matt@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [05:59:02] <thurbad> the people we contracted to bring up the board said the clocks and memory were ok, but I don't know how they determined that exactly
  • [05:59:53] * lyakh (~lyakh@pD9EB9180.dip0.t-ipconnect.de) has joined #beagle
  • [06:02:01] <thurbad> hmm, would underclocking the memory be a problem?
  • [06:03:17] * arc_mat_ (~matze@LRouen-151-71-119-147.w193-253.abo.wanadoo.fr) has joined #beagle
  • [06:03:49] * hgs (~hgs@82.202-63-132.static.qala.com.sg) has joined #beagle
  • [06:04:44] <thurbad> how hard is it to learn to use jtag?
  • [06:06:27] <thurbad> ... assuming you're already comfortable with debugging in an ide
  • [06:09:43] * novogrammer (~novogramm@w0109-114-22-171-100.uqwimax.jp) has joined #beagle
  • [06:14:21] <_av500_> thurbad: you contracted them to bring up a board without the kernel?
  • [06:17:12] <_av500_> "led blinks, send invoice..."
  • [06:17:22] <thurbad> I don't know the details, I assumed that we had someone on deck to get a kernel going. Didn't think there'd be much involved in that frankly since our previous board revision was compatible with the angstrom stock kernel
  • [06:18:01] <_av500_> what did change on the board?
  • [06:19:17] <thurbad> quite a bit apparently
  • [06:19:51] <_av500_> you added a QAB to the schematic?
  • [06:20:27] * thurbad isn't the hardware designer
  • [06:20:37] <thurbad> I didn't touch the schematics
  • [06:20:52] <_av500_> neither do I but I look at them a lot
  • [06:21:07] <_av500_> and shout at HW designers :)
  • [06:21:14] <thurbad> lol
  • [06:21:58] <arc_mat_> thurbad: mov r1, #machine_id ?
  • [06:22:00] * iry (~irytwo@99-25-90-177.lightspeed.hstntx.sbcglobal.net) Quit (Quit: -poof-)
  • [06:22:20] * drakkan1000 (~drakkan@62.123.237.207) has joined #beagle
  • [06:23:43] <thurbad> no, I added a mach-type... that seemed a bit less hackish
  • [06:24:12] <ds2> become a hardware engineer
  • [06:24:16] <ds2> life is more fun there
  • [06:24:25] <thurbad> yeah.. no
  • [06:24:28] <arc_mat_> no, they smell of soldering solvent...
  • [06:24:35] <thurbad> I can
  • [06:24:42] <thurbad> 't solder straight
  • [06:24:51] <ds2> that's why there are rework techs
  • [06:24:59] <Animule> haha
  • [06:25:11] <Animule> test engineers still have the coolest toys :P
  • [06:25:11] <ds2> have fun, use 0201's all over and have your techs change them out all day long
  • [06:25:20] <Animule> 7.5-digit multimeter? Yes please :D
  • [06:25:28] <_av500_> boring
  • [06:25:29] <ds2> then put in bgas all over
  • [06:26:14] <_av500_> b-gas?
  • [06:26:24] <thurbad> my hardware classes in college were with 8086's ;'(
  • [06:26:27] <_av500_> is that the name for solder fumes?
  • [06:26:32] <ds2> yes... more effective then a-gas but less then c-gas
  • [06:27:36] * Animule snaps his suspenders and announces "Dangling participles!"
  • [06:31:43] * raster (raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [06:32:27] * raster (raster@enlightenment2.osuosl.org) has joined #beagle
  • [06:32:27] * raster (raster@enlightenment2.osuosl.org) Quit (Changing host)
  • [06:32:27] * raster (raster@enlightenment/developer/raster) has joined #beagle
  • [06:35:01] * BB__ (75c44769@gateway/web/freenode/ip.117.196.71.105) has joined #beagle
  • [06:35:01] <arc_mat_> thurbad: mine, too
  • [06:35:30] <arc_mat_> thurbad: even after micro controllers went 32bit all over the place
  • [06:35:45] <_av500_> its the concepts that matter
  • [06:35:47] <arc_mat_> thurbad: I had 8051s, too
  • [06:36:04] <_av500_> "..look, thats a cpu, and it can crash..."
  • [06:36:07] <arc_mat_> _av500_: nobody should learn concepts on an 8086
  • [06:36:26] <arc_mat_> _av500_: it gives you brain farts
  • [06:36:26] <_av500_> arc_mat_: sure, you can learn what NOT to do
  • [06:36:41] <ds2> yeah... at least learn it on an 80186
  • [06:36:51] <_av500_> thurbad: do you toggle the A20 gate before you boot the kernel?
  • [06:37:49] * likewise (~likewise@095-097-098-131.static.chello.nl) has joined #beagle
  • [06:38:20] <arc_mat_> ds2: I later had to program assembler on an 80186. running "sinix".
  • [06:38:21] * likewise (~likewise@095-097-098-131.static.chello.nl) Quit (Client Quit)
  • [06:38:41] <arc_mat_> I don't anyone has ever heard of that thing, sinix
  • [06:39:02] <arc_mat_> some unix clone running on siemens 80186 workstations...
  • [06:39:28] * arc_mat_ goes to have breakfast
  • [06:39:32] <arc_mat_> tata
  • [06:39:33] <_av500_> he i did that too
  • [06:39:46] <ds2> we had to build our 80186's boards
  • [06:39:47] <_av500_> sinix and breakfast...
  • [06:39:50] * arc_mat_ is away: Gone away for now
  • [06:39:51] * arc_mat_ (~matze@LRouen-151-71-119-147.w193-253.abo.wanadoo.fr) Quit (Quit: Konversation terminated!)
  • [06:41:02] <thurbad> a20 gate?
  • [06:43:06] <BB__> http://www.google.co.in/search?client=opera&rls=en&q=a20%20gate&oe=utf-8&channel=suggest&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&hl=en&tab=wi&biw=1024&bih=657
  • [06:43:10] <BB__> a20 gate
  • [06:43:30] <BB__> @thurbab
  • [06:45:43] * A22 (75c44769@gateway/web/freenode/ip.117.196.71.105) has joined #beagle
  • [06:45:46] * mrc3 (~ddiaz@189.157.107.176) has joined #beagle
  • [06:45:51] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [06:46:23] <A22> i m playing video on Beagleboard-xm but its slow.so i want to use DSP to play video.therefore follow;->> 1.http://elinux.org/BeagleBoard/dsp-tools
  • [06:46:36] <A22> http://elinux.org/BeagleBoard/DSP_Howto
  • [06:46:49] <A22> & http://elinux.org/BeagleBoard/gst-dsp
  • [06:47:37] <A22> gst-launch playbin2 uri=file:///big_buck_bunny_480p_surround-fix.avi working GOOD
  • [06:48:35] * BB__ (75c44769@gateway/web/freenode/ip.117.196.71.105) Quit (Ping timeout: 252 seconds)
  • [06:48:53] <A22> now i want to take video from webcam & dislay. what will be change in previous command
  • [06:48:54] <A22> ?
  • [06:50:07] <A22> i m using Angstrom image on beagleboard-xm
  • [06:50:42] <A22> & working on hand gesture .
  • [06:53:36] <A22> help me. . .
  • [06:55:39] <A22> any source from where can i get this ans x-(?
  • [06:57:14] <koen> A22: if you're using angstrom, why not use gstreamer-ti?
  • [06:57:22] <koen> A22: that will use the dsp and is already integrated
  • [06:58:27] <koen> and that's just a 'opkg install gstreamer-ti' away
  • [06:58:41] <A22> i hav done . of course it is working . i told "gst-launch playbin2 uri=file:///big_buck_bunny_480p_surround-fix.avi working GOOD "
  • [06:59:14] <A22> my que- now i want to take video from webcam
  • [06:59:54] <A22> .. which can run on DSP as previous video (big_buck_bunny)
  • [07:00:30] <A22> how can i play video from webcam on DSP??
  • [07:02:56] <A22> Or now when i ll try take video from webcam it will use DSP automatically..
  • [07:04:45] <hitlin37> for that,i guess now u r taking video from live source and not from a file..for that you can make ur own pipeline
  • [07:05:11] <hitlin37> as playbin plays from file
  • [07:05:39] * amitk (~amit@a91-154-114-11.elisa-laajakaista.fi) has joined #beagle
  • [07:05:45] <A22> can you give Example?
  • [07:06:03] <A22> you r right ...
  • [07:06:58] <hitlin37> u can write a sample application for that...u can find that on gstreamer website...what u need to do is to make a pipeline which can behave same as playbin but takes input from a "buffer"
  • [07:07:15] <hitlin37> that buffer will be filled by data received from webcam
  • [07:09:46] <hitlin37> its something like reading from /dev/YOUR_WEBCAM and then playing it from the pipeline..playbin itself a default pipeline and you can create a custom pipeline(after u study at gstreamer examples)
  • [07:10:17] <hitlin37> regarding pipeline ask at #gstreamer
  • [07:11:33] <A22> hitlin37: thank you very much
  • [07:11:48] <_av500_> does that webcam even provide a compressed stream?
  • [07:12:28] * _av500_ goes to build a custom framework
  • [07:17:42] * NotTooDumb3 (~vayavya@122.166.13.141) has joined #beagle
  • [07:19:12] <NotTooDumb3> av500, Hi..when i change resolutions with fbset, this command is not going to my setpar function, i set it correct in fbops..what else could i have missed to give? any idea?? thank you.
  • [07:20:49] * kaio (~kaio@fedora/kaio) has joined #beagle
  • [07:22:35] * woglinde (~heinold@g225075085.adsl.alicedsl.de) has joined #beagle
  • [07:25:40] * trelane` (~trelane@funtoo/staff/trelane) has joined #beagle
  • [07:28:04] * trelane (~trelane@funtoo/staff/trelane) Quit (Ping timeout: 248 seconds)
  • [07:34:06] * aarti (~aarti@122.166.11.13) has joined #beagle
  • [07:34:50] <aarti> hi all, beagleboard-xm is not able to detect the SD card, any idea?
  • [07:35:35] * jkridner|work1 (~a0321898@nat/ti/x-itbfdhpaffmpctxg) Quit (Remote host closed the connection)
  • [07:35:43] <woglinde> use another card
  • [07:37:07] <aarti> i tried
  • [07:37:25] <aarti> tht same card is working with another beagle -xm
  • [07:39:38] <woglinde> same kernel, u-boot, mlo?
  • [07:48:35] * mnt_real (~mnt_real@bas1-montreal43-1177755902.dsl.bell.ca) Quit (Remote host closed the connection)
  • [07:49:24] <aarti> ya
  • [07:50:33] <aarti> i was checking signal on expansion board , it was working i reboot the board at tht time board was not booting up
  • [07:51:59] <A22> aarti: buy new one ..
  • [07:52:08] <A22> simplest solution
  • [07:52:40] <woglinde> hm yeah looks like RMA
  • [07:53:43] * drakkan1000 (~drakkan@62.123.237.207) Quit (Ping timeout: 250 seconds)
  • [07:55:14] * aarti (~aarti@122.166.11.13) Quit (Read error: Connection reset by peer)
  • [07:55:38] * aarti (~aarti@122.166.11.13) has joined #beagle
  • [07:57:15] * aarti (~aarti@122.166.11.13) Quit (Read error: Connection reset by peer)
  • [07:57:31] * aarti (~aarti@122.166.11.13) has joined #beagle
  • [07:58:44] * aarti (~aarti@122.166.11.13) Quit (Read error: Connection reset by peer)
  • [07:58:52] <koen> A22: I said 'gstreamer-ti', not 'gstreamer'
  • [07:59:05] <woglinde> gm koen
  • [07:59:20] * aarti (~aarti@122.166.11.13) has joined #beagle
  • [08:01:44] * aarti (~aarti@122.166.11.13) Quit (Read error: Connection reset by peer)
  • [08:02:04] * aarti (~aarti@122.166.11.13) has joined #beagle
  • [08:03:23] <A22> keon: after that what. gst-launch playbin2 uri=file:///big_buck_bunny_480p_surround-fix.avi playbin but playbin plays from file. i want take video from USB camera & run on dsp
  • [08:03:24] * aarti (~aarti@122.166.11.13) Quit (Read error: Connection reset by peer)
  • [08:03:58] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [08:04:18] * mazzanet_ is now known as mazzanet
  • [08:04:21] * aarti (~aarti@122.166.11.13) has joined #beagle
  • [08:04:28] * florian_kc (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [08:04:37] * florian_kc is now known as florian
  • [08:04:52] * Russ (foobar@ip70-176-251-1.ph.ph.cox.net) Quit (Ping timeout: 248 seconds)
  • [08:05:11] * Russ (foobar@ip70-176-251-1.ph.ph.cox.net) has joined #beagle
  • [08:05:11] * aarti (~aarti@122.166.11.13) Quit (Read error: Connection reset by peer)
  • [08:05:31] * aarti (~aarti@122.166.11.13) has joined #beagle
  • [08:07:21] <A22> keon: after that what. gst-launch playbin2 uri=file:///big_buck_bunny_480p_surround-fix.avi playbin but playbin plays from file. i want take video from USB camera & run on dsp
  • [08:07:32] <woglinde> hm
  • [08:07:36] * drakkan1000 (~drakkan@62.123.237.207) has joined #beagle
  • [08:07:37] <woglinde> why on the dsp?
  • [08:07:57] <woglinde> catch the raw stream from the cam
  • [08:08:42] * beagle_xM (62f69906@gateway/web/freenode/ip.98.246.153.6) has joined #beagle
  • [08:09:19] <beagle_xM> Evening/morning all
  • [08:10:00] <beagle_xM> Need a bit of help with USB power on beagle xM Rev B00
  • [08:10:32] <woglinde> beagle_xM we have to send you power?
  • [08:10:46] <beagle_xM> Serial powers on fine, but ethernet and usb ports do not.
  • [08:11:08] <woglinde> ?
  • [08:11:28] <beagle_xM> I can boot the board and get console output on the serial interface.
  • [08:11:38] <woglinde> yes
  • [08:11:44] <beagle_xM> However - no devices connected to the USB ports receive any power.
  • [08:12:26] <beagle_xM> Ethernet (which is part of the USB hub on Beagle xM, as far as I understand from the spec) also does not detect the ethernet cable, does not send out any packets.
  • [08:12:53] <beagle_xM> D14 LED is on though.
  • [08:13:29] <beagle_xM> Either I'm missing something very basic or the board is faulty. I doubt the latter.
  • [08:13:59] <beagle_xM> Would appreciate any constructive suggestions.
  • [08:14:05] <woglinde> use a multimeter?
  • [08:14:38] <beagle_xM> Not available at the moment.
  • [08:15:24] <beagle_xM> From the spec, it may be related to setting via I2C some registers to provide power to the USB ports.
  • [08:15:47] <beagle_xM> I was wondering if anyone has pointers for this type of information.
  • [08:16:30] <A22> woglinde: i m doing hand gesture recognition & trying to run output video on DSP(for speed). i know how to play video from file (not live) on DSP using ""gst-launch playbin2 uri=file:///big_buck_bunny_480p_surround-fix.avi"".but Don't know how to play video (live) . got it????
  • [08:16:54] <woglinde> A22 read the gstreamer doku
  • [08:17:33] <aarti> A22, i want to fix this board only
  • [08:17:34] <woglinde> by the way you might be better with opencv
  • [08:17:53] <A22> i m using opencv ...
  • [08:17:54] <woglinde> opencv has a v4l capture module
  • [08:18:04] <A22> i m using opencv
  • [08:18:07] <woglinde> opencv has a v4l capture module
  • [08:18:53] <A22> my friend told me "gst-launch v4l2src device=/dev/video0 ! dspmp4venc ! filesink location=./myfile.mp4"
  • [08:20:34] <woglinde> and you friend did regconition with gst?
  • [08:20:46] <woglinde> opencv has a v4l capture module
  • [08:23:05] <koen> A22: http://tinyurl.com/3kcen6s
  • [08:23:09] <woglinde> or what is your goal?
  • [08:23:13] <woglinde> record it first
  • [08:23:19] <woglinde> and the use opencv?
  • [08:23:22] <woglinde> then
  • [08:26:32] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) Quit (Ping timeout: 252 seconds)
  • [08:34:15] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) has joined #beagle
  • [08:41:17] <A22> thanks do searching ing ing . cya
  • [08:41:26] * A22 (75c44769@gateway/web/freenode/ip.117.196.71.105) has left #beagle
  • [08:57:32] * [IDC]Dragon_ (~hohensohn@a89-183-181-178.net-htp.de) has joined #beagle
  • [09:00:36] * beagle_xM (62f69906@gateway/web/freenode/ip.98.246.153.6) Quit ()
  • [09:01:02] * eFfeM_work (~frans@D4B26BC1.static.ziggozakelijk.nl) has left #beagle
  • [09:07:14] <NotTooDumb3> Hi..did any one see the tv screen going blank after a few seconds with angstrom image? same boot.scr worked before, but not working now
  • [09:10:07] <woglinde> use the boot.scr which worked
  • [09:12:51] <NotTooDumb3> woglinde, i am using the same boot.scr which worked, and all other files i again downloaded from demo image site, to remove any confusions for myself
  • [09:13:12] * matthsu (~matt@61-30-10-70.static.tfn.net.tw) Quit (Quit: Lost terminal)
  • [09:15:25] <woglinde> than I dont know
  • [09:15:29] <woglinde> have to reboot
  • [09:15:32] * woglinde (~heinold@g225075085.adsl.alicedsl.de) Quit (Quit: zapp)
  • [09:17:14] <NotTooDumb3> yes i rebooted and tested multiple times, checked s-video luminance output on oscilloscope also, signal itself is not coming out after those few seconds
  • [09:18:30] <NotTooDumb3> and this is happening only with angstrom, other normal kernel boots up and display is there, angstrom also is booting up but tv display is going off
  • [09:32:16] * liu (7d47e7ce@gateway/web/freenode/ip.125.71.231.206) has joined #beagle
  • [09:37:30] * liu (7d47e7ce@gateway/web/freenode/ip.125.71.231.206) Quit (Ping timeout: 252 seconds)
  • [09:44:34] * kaio (~kaio@fedora/kaio) Quit (Ping timeout: 264 seconds)
  • [09:46:27] * raster (raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [09:50:53] * 77CAAIIHM (~cipi@89.238.251.90) has joined #beagle
  • [09:52:12] <jacekowski> oscilloscope
  • [09:52:27] <jacekowski> isn't that a bit of an overkill for that
  • [09:59:49] * NotTooDumb3 (~vayavya@122.166.13.141) Quit (Remote host closed the connection)
  • [10:06:36] * [IDC]Dragon__ (~hohensohn@a89-182-71-128.net-htp.de) has joined #beagle
  • [10:07:55] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) Quit (Excess Flood)
  • [10:08:29] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  • [10:10:03] * [IDC]Dragon_ (~hohensohn@a89-183-181-178.net-htp.de) Quit (Ping timeout: 260 seconds)
  • [10:12:39] * liu_ (7d47e7ce@gateway/web/freenode/ip.125.71.231.206) has joined #beagle
  • [10:12:44] <liu_> hi ,all.i have trouble in booting the Android with the beagleboard-xm.anyone help?
  • [10:14:12] * liu__ (7d47e7ce@gateway/web/freenode/ip.125.71.231.206) has joined #beagle
  • [10:14:27] <liu__> hi ,all.i have trouble in booting the Android with the beagleboard-xm.anyone help?it stoped at the ANDROID LOGO for about 10 minute..
  • [10:15:35] <hitlin37> i guess it should be fairly easy to port xbmc on andriod
  • [10:16:13] <hitlin37> liu__,for the first time ,it takes little more time depending on ur card speed classs
  • [10:16:52] * bradfa (~andrew@cpe-69-207-148-166.rochester.res.rr.com) has joined #beagle
  • [10:17:59] * liu_ (7d47e7ce@gateway/web/freenode/ip.125.71.231.206) Quit (Ping timeout: 252 seconds)
  • [10:19:43] * liu__ (7d47e7ce@gateway/web/freenode/ip.125.71.231.206) Quit (Ping timeout: 252 seconds)
  • [10:25:47] * woglinde (~heinold@g225075085.adsl.alicedsl.de) has joined #beagle
  • [10:27:18] * novogrammer (~novogramm@w0109-114-22-171-100.uqwimax.jp) Quit (Ping timeout: 240 seconds)
  • [10:27:32] * mlip|aw is now known as mlip
  • [10:38:01] <woglinde> hm
  • [10:38:02] <woglinde> "opencv_beagle_sobel.c", line 13: fatal error: could not open source file "include/IMG_sobel_3x3_16.h"
  • [10:38:05] <woglinde> not good
  • [10:42:17] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) Quit (Ping timeout: 250 seconds)
  • [10:42:25] * dm8tbr just read "could not 'open source' file" and was WTF
  • [10:43:00] <woglinde> so now lets see was going wroing
  • [10:43:01] * aarti (~aarti@122.166.11.13) Quit (Read error: Connection reset by peer)
  • [10:43:35] * aarti (~aarti@122.166.11.13) has joined #beagle
  • [10:43:45] <woglinde> hm compiler is right
  • [10:43:49] <woglinde> the file isnt there
  • [10:46:54] <woglinde> lets try the latest version
  • [10:56:30] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) has joined #beagle
  • [11:02:25] * jeremychang (~jeremy@61-30-10-70.static.tfn.net.tw) Quit (Quit: ??????)
  • [11:03:25] <woglinde> hm c6aceel was toi stuff?
  • [11:07:17] * kaio (~kaio@fedora/kaio) has joined #beagle
  • [11:25:41] <koen> woglinde: c6run is toy stuff, c6accel is a bit better
  • [11:26:12] <koen> woglinde: c6accel is a wrapper around the existing optimized DSP kernels in imglib, videolib, etc
  • [11:26:29] <koen> where possible it tries to provide an opencv friendly api
  • [11:26:46] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) Quit (Ping timeout: 252 seconds)
  • [11:27:00] <koen> e.g. IMGlib uses 16bit samples, opencv 8, c6accel hides that
  • [11:27:47] <koen> the problem I have with the current c6accel opencv stuff is that they write their own lib that mimics the opencv api, instead of patching opencv
  • [11:28:33] <koen> so you need to patch your app to use c6accel prefixed opencv calls
  • [11:28:44] <koen> which is crazy, so they are changing that
  • [11:28:56] <woglinde> koen right I am just looking at that
  • [11:29:31] <koen> I need to work up some motivation to try the latest stuff
  • [11:29:43] <koen> but I don't have any good opencv "apps" to use
  • [11:30:31] <woglinde> hm but you have to patch opencv anyway
  • [11:30:39] <woglinde> for cmem support
  • [11:31:01] <koen> I have that patch, that's only 10 lines or so
  • [11:31:11] * stefanc (d53d6c14@gateway/web/freenode/ip.213.61.108.20) has joined #beagle
  • [11:33:10] * tegila (~tegila@189-041-118-233.xd-dynamic.ctbcnetsuper.com.br) has joined #beagle
  • [11:34:17] <woglinde> hm I am looking at if now, if it possible to make transparent
  • [11:35:16] * aarti (~aarti@122.166.11.13) Quit (Read error: Connection reset by peer)
  • [11:35:31] <woglinde> otherwise its suckz and you cannt test your normal opencv programms
  • [11:35:40] * aarti (~aarti@122.166.11.13) has joined #beagle
  • [11:37:08] * gustavoz (~gustavoz@host97.186-109-1.telecom.net.ar) has joined #beagle
  • [11:39:44] <stefanc> hi guys. i just got my second beagleboard xm and its rev. C. Is there any documentation on what changed between rev. B and C?
  • [11:40:06] <woglinde> beagleboard.org?
  • [11:41:13] <stefanc> first place i looked.. newest rev there is rev A3 (which is B afaik)
  • [11:44:26] <koen> woglinde: it wrapped malloc(), so while transparent, not a good idea
  • [11:44:35] * Pranav_rcmas (~prp_rcmas@122.164.192.39) has joined #beagle
  • [11:46:22] <woglinde> koen sure in this form it will not work
  • [11:46:36] <woglinde> there is api flag needed wether to use cmem or normal mem
  • [11:46:42] <koen> right
  • [11:46:54] * arc_mat_ (~matze@233-53.206-83.static-ip.oleane.fr) has joined #beagle
  • [11:46:55] * arc_mat_ is away: Gone away for now
  • [11:49:03] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) Quit (Excess Flood)
  • [11:49:34] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  • [11:50:21] <koen> woglinde: I've sent a mail Gagan to get his latest opencv work, hopefully we can git it to a point where it builds and can be tested
  • [11:51:02] <woglinde> koen who is gagan?
  • [11:51:16] <koen> the guy in charge of the c6accel stuff
  • [11:51:39] * bradfa (~andrew@cpe-69-207-148-166.rochester.res.rr.com) Quit (Quit: Ex-Chat)
  • [11:51:50] * likewise (~likewise@199-76-ftth.onsneteindhoven.nl) has joined #beagle
  • [11:52:03] <woglinde> hm so c6aceel stuff has cv inside or not?
  • [11:52:13] <woglinde> thats what I am not so clear about
  • [11:52:39] <koen> c6accel has an API that is suitable for opencv to hook into
  • [11:52:57] <koen> there's a seperate effort to make opencv use c6accel
  • [11:53:09] <koen> Gagan is in charge of that as well
  • [11:53:16] <woglinde> ah okay
  • [11:53:23] <woglinde> now I understand it
  • [11:53:50] <koen> so from working on opencv they find bugs/gaps/etc in c6accel and fix them
  • [11:55:20] <koen> I wish Crofton|work could convince his minions to try c6accel and send bugreports
  • [11:56:05] <koen> it really needs more real-world usage
  • [11:56:07] * mrc3 (~ddiaz@189.157.107.176) Quit (Read error: Operation timed out)
  • [12:00:51] <woglinde> hm so its not worth at the moment to dig deeper into it
  • [12:02:34] * likewise_ (~likewise@42-81-ftth.onsneteindhoven.nl) has joined #beagle
  • [12:02:38] <koen> not till I get the latest code drop :/
  • [12:05:55] * likewise (~likewise@199-76-ftth.onsneteindhoven.nl) Quit (Ping timeout: 250 seconds)
  • [12:05:55] * likewise_ is now known as likewise
  • [12:09:39] <openfree> df -h
  • [12:09:40] <openfree> ls
  • [12:09:47] * WiseyPS (~prasshant@117.193.160.85) has joined #beagle
  • [12:12:14] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [12:15:37] * GPSFan (~kenm@64.92.145.112) has joined #beagle
  • [12:15:51] * gustavoz (~gustavoz@host97.186-109-1.telecom.net.ar) Quit (Quit: Leaving)
  • [12:17:24] * gustavoz (~gustavoz@host97.186-109-1.telecom.net.ar) has joined #beagle
  • [12:20:09] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) Quit (Excess Flood)
  • [12:20:43] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  • [12:24:08] * likewise (~likewise@42-81-ftth.onsneteindhoven.nl) Quit (Quit: likewise)
  • [12:26:04] <thurbad> well, about time to plug my board into a better power source and see if it gets past kernel decompression ~.~
  • [12:28:19] * Splash (5dc8fcbe@gateway/web/freenode/ip.93.200.252.190) has joined #beagle
  • [12:28:21] * tegila (~tegila@189-041-118-233.xd-dynamic.ctbcnetsuper.com.br) Quit (Quit: Leaving.)
  • [12:29:30] * b7500af1 (~vt@2001:468:c80:4240:21c:bfff:fe8b:9c32) has joined #beagle
  • [12:30:05] <woglinde> thurbad or use the right console device?
  • [12:30:09] * stefanc (d53d6c14@gateway/web/freenode/ip.213.61.108.20) Quit (Quit: Page closed)
  • [12:33:00] <topfs2> ssssh, it sounds so much more fun if he just juice it up, perhaps it will spark and everything :)
  • [12:34:06] * beagle2 (48135c1e@gateway/web/freenode/ip.72.19.92.30) has joined #beagle
  • [12:34:26] <beagle2> does anyone know a quick way to fix my camera's lag on my openCV program?
  • [12:34:57] <AxMountain> lower the resolution ?
  • [12:36:05] <Splash> I have set bitbake up to build an image for the beagleboard. Is it right that it starts building with TARGET_FPU = "hard"? I thought the last time I used bitbake it was soft or softfp?
  • [12:36:50] <koen> "hard" is softfp
  • [12:37:17] <koen> it will use the hardware fpu when available using softfp calling conventions
  • [12:38:40] <Splash> Okay, thanks!
  • [12:40:21] * aarti (~aarti@122.166.11.13) Quit (Quit: Leaving)
  • [12:44:47] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) has joined #beagle
  • [12:45:01] * kaio (~kaio@fedora/kaio) Quit (Read error: No route to host)
  • [12:45:39] * kaio (~kaio@fedora/kaio) has joined #beagle
  • [12:49:47] * BlInK311 (~Ward@ool-44c42324.dyn.optonline.net) has joined #beagle
  • [12:50:05] * mctouch (~mctouch@cpc17-sgyl28-2-0-cust34.sgyl.cable.virginmedia.com) has joined #beagle
  • [12:52:07] <thurbad> woglinde I'm using a 2.6.32 kernel so I assume the uboot paramater of ttyS2 is still valid
  • [12:52:24] <thurbad> I tried ttys0.. just in case with no success
  • [12:52:38] <thurbad> err.... ttyS0
  • [12:52:41] * amitk (~amit@a91-154-114-11.elisa-laajakaista.fi) Quit (Quit: leaving)
  • [12:53:45] <woglinde> yes for .32 S0
  • [12:57:08] * WiseyPS (~prasshant@117.193.160.85) Quit (Remote host closed the connection)
  • [13:01:13] * Splash (5dc8fcbe@gateway/web/freenode/ip.93.200.252.190) Quit (Quit: Page closed)
  • [13:03:51] <[IDC]Dragon__> hi, is somebody aware of a fast compression/decompression algorithm? (can be something primitive like run length coding, for gfx bitmaps)
  • [13:04:12] <[IDC]Dragon__> perhaps utilizing neon or such
  • [13:04:26] <Russ> lzop?
  • [13:04:29] <[IDC]Dragon__> need to be fast both ways
  • [13:05:00] * woglinde_ (~heinold@f052065053.adsl.alicedsl.de) has joined #beagle
  • [13:05:36] <[IDC]Dragon__> ah, from Mr. Oberhumer
  • [13:05:48] * pluswave (~zzb@221.219.61.56) has joined #beagle
  • [13:05:54] <[IDC]Dragon__> lzop is GPL, a nogo
  • [13:05:58] * peabody124 (~peabody12@c-98-196-22-185.hsd1.tx.comcast.net) Quit (Read error: Connection reset by peer)
  • [13:06:21] * peabody124 (~peabody12@c-98-196-22-185.hsd1.tx.comcast.net) has joined #beagle
  • [13:06:26] <Russ> there are probably other implementations of lzo
  • [13:07:22] <[IDC]Dragon__> I'd go for an architecture-optimized one ;-)
  • [13:07:53] <Russ> so you want it to be fast, optimized for your arch, AND you want to own it outright?
  • [13:08:14] <[IDC]Dragon__> yes please ;-)
  • [13:08:20] * woglinde (~heinold@g225075085.adsl.alicedsl.de) Quit (Ping timeout: 260 seconds)
  • [13:08:21] <[IDC]Dragon__> worth a try...
  • [13:10:35] <[IDC]Dragon__> (just in case this is a standard nobrainer problem)
  • [13:11:25] * thurbad (~nate@rrcs-97-79-173-242.sw.biz.rr.com) Quit (Quit: Ex-Chat)
  • [13:14:41] * jkridner|work (~a0321898@nat/ti/x-ykzrrovtzhtndjqc) has joined #beagle
  • [13:17:33] * woglinde_ is now known as woglinde
  • [13:17:50] * likewise (~likewise@199-76-ftth.onsneteindhoven.nl) has joined #beagle
  • [13:18:38] * beagle2 (48135c1e@gateway/web/freenode/ip.72.19.92.30) Quit (Ping timeout: 252 seconds)
  • [13:19:32] * likewise_ (~likewise@42-81-ftth.onsneteindhoven.nl) has joined #beagle
  • [13:20:33] <jkridner|work> ds2: pong
  • [13:21:09] * likewise__ (~likewise@42-81-ftth.onsneteindhoven.nl) has joined #beagle
  • [13:21:17] * likewise__ (~likewise@42-81-ftth.onsneteindhoven.nl) Quit (Remote host closed the connection)
  • [13:21:24] * likewise__ (~likewise@42-81-ftth.onsneteindhoven.nl) has joined #beagle
  • [13:21:36] * likewise_ (~likewise@42-81-ftth.onsneteindhoven.nl) Quit (Read error: Connection reset by peer)
  • [13:21:44] * likewise__ (~likewise@42-81-ftth.onsneteindhoven.nl) Quit (Client Quit)
  • [13:22:11] * likewise (~likewise@199-76-ftth.onsneteindhoven.nl) Quit (Ping timeout: 250 seconds)
  • [13:24:42] * jkridner|work1 (~a0321898@nat/ti/x-fefjpnlpqwwisvfi) has joined #beagle
  • [13:24:57] * torez (~torez@cpe-70-113-107-26.austin.res.rr.com) has joined #beagle
  • [13:24:57] * torez (~torez@cpe-70-113-107-26.austin.res.rr.com) Quit (Changing host)
  • [13:24:57] * torez (~torez@linaro/torez) has joined #beagle
  • [13:27:23] * jkridner|work (~a0321898@nat/ti/x-ykzrrovtzhtndjqc) Quit (Ping timeout: 250 seconds)
  • [13:41:19] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
  • [13:42:58] * Openfree^ (~Openfree`@61.170.199.58) has joined #beagle
  • [13:43:19] * Openfree^ (~Openfree`@61.170.199.58) Quit (Read error: Connection reset by peer)
  • [13:50:35] * Pranav_rcmas (~prp_rcmas@122.164.192.39) Quit (Quit: Leaving)
  • [13:52:36] * Openfree^ (~Openfree`@61.170.199.58) has joined #beagle
  • [13:53:33] * l4 (~l4@88.119.128.50) Quit (Quit: Leaving.)
  • [13:53:48] * jkridner|work (~a0321898@nat/ti/x-sjnjzjyabofcfxxr) has joined #beagle
  • [13:55:41] * jkridner|work1 (~a0321898@nat/ti/x-fefjpnlpqwwisvfi) Quit (Ping timeout: 276 seconds)
  • [13:56:06] * smplman (~speery@64.132.167.18) Quit (Quit: smplman)
  • [13:56:22] * woglinde_ (~heinold@f052065006.adsl.alicedsl.de) has joined #beagle
  • [13:56:38] * katier (~katierh@nat/ti/x-zwofqxkdlvszbbrw) has joined #beagle
  • [13:57:28] * alancam (~alancam@nat/ti/x-pltijdluaftbglxw) has joined #beagle
  • [13:57:35] * Mason (75feb43a@gateway/web/freenode/ip.117.254.180.58) has joined #beagle
  • [13:59:03] * BThompson (~a0193480@nat/ti/x-womnxfrmvjnfzcfy) has joined #beagle
  • [13:59:34] * woglinde (~heinold@f052065053.adsl.alicedsl.de) Quit (Ping timeout: 264 seconds)
  • [14:01:51] * bazbell (~a0192809@nat/ti/x-hcdqumdqhplmonrt) has left #beagle
  • [14:04:46] <Mason> hey folks
  • [14:05:04] <Mason> i want to bounce around a few ideas
  • [14:05:31] <Mason> opencv on the beagleboard gives a very slow framerate...any ideas on how we can increase the frame rate?
  • [14:05:37] <woglinde_> lol
  • [14:05:44] <woglinde_> I should specialize on opencv
  • [14:05:53] <woglinde_> and take money for it
  • [14:06:13] <Mason> i have heard that people have used SDL for capturing video streams and used OpenCV for the processing part
  • [14:06:19] <Mason> woglinde: :)
  • [14:06:43] <Mason> woglinde: what do you suggest?
  • [14:07:02] <AxMountain> Mason, have you tride to lower the resolution?
  • [14:07:06] <woglinde_> opencv can capture v4l devices it self
  • [14:07:15] <woglinde_> mason get familar with profling
  • [14:07:27] <woglinde_> ups profiling and analyze your pitfalls
  • [14:07:34] <Mason> yes, i have. i use a standard VGA cam with 640x480, and i reduced it to half.
  • [14:08:03] <Mason> but not a significant omprovement
  • [14:08:05] <Mason> im*
  • [14:08:07] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) Quit (Ping timeout: 250 seconds)
  • [14:08:22] <woglinde_> again opencv can capture v4l devices itself
  • [14:08:25] <woglinde_> try this first
  • [14:08:30] <Mason> okay
  • [14:09:08] <Mason> so in the cVCapturefromCAM, i pass the V4L as a parameter, right?
  • [14:09:27] <woglinde_> should be
  • [14:10:10] * kaio (~kaio@fedora/kaio) Quit (Ping timeout: 260 seconds)
  • [14:10:17] <Mason> alright. that's a good suggestion. just for information's sake, what is the reason behind the low fps in the 1st place?
  • [14:10:27] <woglinde_> http://opencv.willowgarage.com/wiki/Welcome/OS
  • [14:10:37] * kaio (~kaio@fedora/kaio) has joined #beagle
  • [14:10:39] <Mason> (i'll try out the v4l and get back to you asap.)
  • [14:10:39] <woglinde_> mason dont know
  • [14:10:42] <woglinde_> profile
  • [14:11:54] * Openfree^ (~Openfree`@61.170.199.58) Quit (Read error: Connection timed out)
  • [14:11:57] <Mason> okay. so profiling is essentially monitoring the entire process that runs and figuring out which part of the process eats up more time, right? sorry if the question is noob-like, but i actually am new to this! :)
  • [14:12:27] <woglinde_> new to profiling?
  • [14:12:35] <Mason> yes
  • [14:13:24] <Mason> but i'm guessing from the context in which i've seen people use the word profiling, that it has something to do with dynamic program analysis, instead of checking the coding and stuff.
  • [14:13:28] <woglinde_> profiling is about to find out which functions eats the most time
  • [14:13:46] * Openfree^ (~Openfree`@61.170.199.58) has joined #beagle
  • [14:14:07] <Mason> okay.
  • [14:14:34] <woglinde_> you could try oprofile
  • [14:14:43] <woglinde_> which is mostly the easiest
  • [14:16:12] * gxk (~gxk@192.91.60.10) has joined #beagle
  • [14:16:28] <Mason> okay. thanks for the suggestion. get it by opkg?
  • [14:16:40] <woglinde_> opkg update
  • [14:16:49] <woglinde_> opkg list | grep opro
  • [14:19:44] * thurbad (~nate@64.132.24.248) has joined #beagle
  • [14:21:01] <Mason> alright. will try this stuff out. thanks! :)
  • [14:21:05] * Mason (75feb43a@gateway/web/freenode/ip.117.254.180.58) has left #beagle
  • [14:21:43] <woglinde_> hm can u-boot read from ext4 partitions?
  • [14:21:46] * jconnolly (~jconnolly@66.43.64.66) Quit (Remote host closed the connection)
  • [14:22:44] * A22 (75c4475f@gateway/web/freenode/ip.117.196.71.95) has joined #beagle
  • [14:23:08] <woglinde_> hm silly question I can put kernel image with ext4 support onto firstpart
  • [14:24:14] <thurbad> meh, can't even figure out where to start looking into this kernel issue, none of the printk statement seem to fire
  • [14:24:16] <A22> #gstreamer
  • [14:25:19] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Quit: Leaving)
  • [14:31:07] * _av500_ just built a custom framework: http://www.flickr.com/photos/av500/5669643232/in/photostream
  • [14:32:10] * likewise (~likewise@42-81-ftth.onsneteindhoven.nl) has joined #beagle
  • [14:33:10] * jpirko (~jirka@ip-94-112-98-100.net.upcbroadband.cz) Quit (Read error: Operation timed out)
  • [14:36:35] * emeb (~ericb@ip70-190-178-49.ph.ph.cox.net) has joined #beagle
  • [14:39:05] * ands (~ands@89.244.108.99) Quit (Ping timeout: 260 seconds)
  • [14:40:33] <Crofton|work> very talented
  • [14:41:09] * pcacjr__ (~pcacjr@187.78.184.102) Quit (Ping timeout: 248 seconds)
  • [14:41:45] <A22> how to get and show the image from Gstreamer pipeline with Opencv function ?
  • [14:42:24] * jayabharath (~jayabhara@nat/ti/x-pjlfwmczfazfdtrr) has joined #beagle
  • [14:43:21] <_av500_> thurbad: did you check the machine id?
  • [14:43:30] <_av500_> did you change it for your board?
  • [14:43:40] <_av500_> in both uboot and kernel
  • [14:44:21] * drakkan1000 (~drakkan@62.123.237.207) Quit (Ping timeout: 252 seconds)
  • [14:44:45] <_av500_> Crofton|work: it uses threaded bindings
  • [14:45:19] <Crofton|work> rofl
  • [14:46:09] * iry (~irytwo@99-25-90-177.lightspeed.hstntx.sbcglobal.net) has joined #beagle
  • [14:47:04] * jconnolly (~jconnolly@66.43.64.66) has joined #beagle
  • [14:47:16] * mnt_real (~mnt_real@bas1-montreal43-1177755902.dsl.bell.ca) has joined #beagle
  • [14:47:50] * ands (~ands@89.244.123.243) has joined #beagle
  • [14:47:54] <A22> how to get and show the image from Gstreamer pipeline with Opencv function .
  • [14:49:08] * jconnolly (~jconnolly@66.43.64.66) Quit (Client Quit)
  • [14:49:46] <thurbad> av500, yes
  • [14:50:28] <thurbad> av500, added a new board type to Kconfig just now and am checking it
  • [14:50:31] * torez (~torez@linaro/torez) Quit (Quit: Ex-Chat)
  • [14:50:57] <dm8tbr> jkridner|work: so, things on track now?
  • [14:50:57] * torez (~torez@cpe-70-113-107-26.austin.res.rr.com) has joined #beagle
  • [14:50:57] * torez (~torez@cpe-70-113-107-26.austin.res.rr.com) Quit (Changing host)
  • [14:50:57] * torez (~torez@linaro/torez) has joined #beagle
  • [14:51:38] <_av500_> thurbad: do your know what part of the hw changed?
  • [14:52:09] * Xerion (~xerion@5419A4D7.cm-5-2c.dynamic.ziggo.nl) Quit (Quit: )
  • [14:53:01] <thurbad> the major change is we moved away from pop, and are using CUS packaging.. which is a pretty major change
  • [14:55:38] * Xerion (~xerion@5419A4D7.cm-5-2c.dynamic.ziggo.nl) has joined #beagle
  • [14:56:39] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) has joined #beagle
  • [14:57:08] * prpplague (~prpplague@ppp-70-242-115-91.dsl.rcsntx.swbell.net) Quit (Quit: Leaving)
  • [15:00:43] * jeremychang (~jeremy@61.57.131.211) has joined #beagle
  • [15:01:28] * jkridner|work (~a0321898@nat/ti/x-sjnjzjyabofcfxxr) Quit (Remote host closed the connection)
  • [15:02:25] * jkridner|work (~a0321898@nat/ti/x-bvhjesscviqgohch) has joined #beagle
  • [15:03:29] * _koen_ (~x0115699@nat/ti/x-lnmrxiihavqbnwea) Quit (Ping timeout: 276 seconds)
  • [15:05:31] * gustavoz (~gustavoz@host97.186-109-1.telecom.net.ar) Quit (Quit: Leaving)
  • [15:12:38] * drakkan1000 (~drakkan@62.123.237.207) has joined #beagle
  • [15:17:17] * Mason (75feb43a@gateway/web/freenode/ip.117.254.180.58) has joined #beagle
  • [15:17:47] * drakkan1000 (~drakkan@62.123.237.207) Quit (Ping timeout: 276 seconds)
  • [15:21:00] * pluswave (~zzb@221.219.61.56) has left #beagle
  • [15:22:24] <A22> #Gstreamer
  • [15:24:22] <_av500_> yes
  • [15:24:41] * jkridner|work (~a0321898@nat/ti/x-bvhjesscviqgohch) Quit (Ping timeout: 240 seconds)
  • [15:24:43] * jkridner|work1 (~a0321898@nat/ti/x-rgkyjatmgpufodug) has joined #beagle
  • [15:25:44] * l4 (~l4@78-62-153-222.static.zebra.lt) has joined #beagle
  • [15:30:33] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Ping timeout: 252 seconds)
  • [15:31:59] * borillion_ (~borillion@adsl-76-211-225-142.dsl.pltn13.sbcglobal.net) has joined #beagle
  • [15:32:40] * borillion_ (~borillion@adsl-76-211-225-142.dsl.pltn13.sbcglobal.net) Quit (Client Quit)
  • [15:32:54] * borillion (~borillion@adsl-76-211-225-142.dsl.pltn13.sbcglobal.net) has joined #beagle
  • [15:43:37] <A22> .
  • [15:47:05] <A22> can DSP run the pipeline ??
  • [15:48:23] <A22> .
  • [15:48:23] <A22> can DSP run the pipeline ??
  • [15:48:49] <A22> can DSP run the pipeline ??can DSP run the pipeline ??can DSP run the pipeline ??can DSP run the pipeline ??can DSP run the pipeline ??can DSP run the pipeline ??
  • [15:49:01] * inx (~inx@95.209.85.249.bredband.tre.se) has joined #beagle
  • [15:49:38] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [15:50:43] * kimitake_idle (~kimitake@netblock-68-183-233-221.dslextreme.com) Quit (Ping timeout: 252 seconds)
  • [15:50:51] <A22> can DSP run the pipeline ??
  • [15:52:03] * arc_mat_ (~matze@233-53.206-83.static-ip.oleane.fr) Quit (Remote host closed the connection)
  • [15:52:42] * kimitake_idle (~kimitake@netblock-68-183-233-221.dslextreme.com) has joined #beagle
  • [15:53:02] * gustavoz (~gustavoz@host20.186-109-4.telecom.net.ar) has joined #beagle
  • [15:53:13] <A22> Gstreamer use DSP for video
  • [15:53:16] <A22> m i right?
  • [15:53:34] <A22> i hav made opencv gstreamer plugin
  • [15:54:32] <A22> now when i do run any opencv program , will video processing be done on DSP now???
  • [15:54:41] * jkridner|work1 (~a0321898@nat/ti/x-rgkyjatmgpufodug) Quit (Ping timeout: 240 seconds)
  • [15:54:57] <woglinde_> A22 its not setteld yet
  • [15:55:15] <woglinde_> you can try this http://code.google.com/p/opencv-dsp-acceleration/wiki/Instruction_For_Building_Examples
  • [15:58:02] <A22> woglinde: - NOT that. i hav to do Video encoding /decoding on DSp through Gstreamer
  • [15:59:03] * Openfree^ (~Openfree`@61.170.199.58) Quit (Ping timeout: 250 seconds)
  • [15:59:45] <A22> i hav done "GStreamer Bad Plug-ins" with opencv . (opencv gstreamer plugin)
  • [15:59:58] <A22> got it? what is my problem??
  • [16:00:01] * Openfree^ (~Openfree`@61.170.193.222) has joined #beagle
  • [16:02:20] <woglinde_> hm and the gstreamer opencv plugin works?
  • [16:03:10] <A22> someone told me . what do you think abt that??
  • [16:03:22] * arc_mat (~matze@p50996ded.dip0.t-ipconnect.de) Quit (Remote host closed the connection)
  • [16:03:25] <woglinde_> try it
  • [16:03:26] * jevin_ (~jevin@c-24-13-122-228.hsd1.in.comcast.net) Quit (Quit: jevin_)
  • [16:03:34] <A22> do you know any thing told me???
  • [16:03:38] * arc_mat (~matze@p50996ded.dip0.t-ipconnect.de) has joined #beagle
  • [16:03:56] <A22> *tell me
  • [16:04:07] <woglinde_> google opencv gstreamer?
  • [16:04:10] <thurbad> so for 2.6.32 is the correct console ttyS0 or ttys2 ?
  • [16:04:17] <woglinde_> ttyS2
  • [16:04:31] <A22> woglinde: - doing for 2 days
  • [16:04:45] <thurbad> that's what I thought, but I keep seeing conflicting posts
  • [16:12:19] <woglinde_> thurbad what?
  • [16:13:36] <woglinde_> hm intressting on debian opencv is not compiled
  • [16:15:01] * prpplague_afk is now known as prpplague
  • [16:19:03] <woglinde_> here are some python examples
  • [16:19:05] <woglinde_> http://bazaar.launchpad.net/~michael-sheldon/gst-opencv/trunk/files/head:/examples/python/
  • [16:19:21] <woglinde_> but you have to convert it to actual stuff
  • [16:20:36] * A22 (75c4475f@gateway/web/freenode/ip.117.196.71.95) Quit (Ping timeout: 252 seconds)
  • [16:21:05] * jevin_ (~jevin@184.17.65.84) has joined #beagle
  • [16:34:33] * woglinde (~heinold@g225006194.adsl.alicedsl.de) has joined #beagle
  • [16:36:55] * woglinde_ (~heinold@f052065006.adsl.alicedsl.de) Quit (Ping timeout: 252 seconds)
  • [16:37:12] * torez (~torez@linaro/torez) Quit (Quit: Ex-Chat)
  • [16:37:59] <koen> woglinde: gst-opencv is now merged in to main gst-plugins-bad
  • [16:39:29] * rcranetx (~rcranetx@nat/ti/x-lscsozwqoquiggsi) Quit (Ping timeout: 252 seconds)
  • [16:40:06] <woglinde> I know
  • [16:40:43] <woglinde> koen but the examples wasnt merged
  • [16:43:18] * 77CAAIIHM (~cipi@89.238.251.90) Quit (Read error: Connection reset by peer)
  • [16:49:18] * BlInK311 (~Ward@ool-44c42324.dyn.optonline.net) Quit (Ping timeout: 240 seconds)
  • [16:52:19] * novogrammer (~novogramm@w0109-114-22-168-35.uqwimax.jp) has joined #beagle
  • [16:52:33] <_av500_> koen: what does gst-opencv do?
  • [16:52:40] <Mason> can anyone here tell me the basic difference between these 2 methods for opencv with dsp? http://pramodpoudel.blogspot.com/ and gst-opencv?
  • [16:52:43] <_av500_> koen: does it run the pipeline?
  • [16:53:58] * eFfeM (~frans@j200125.upc-j.chello.nl) has joined #beagle
  • [16:54:19] <Mason> anybody?
  • [16:55:37] <_av500_> what does gst-opencv do?
  • [16:56:18] <woglinde> av500 the normal opencv function in the pipeline
  • [16:56:26] <woglinde> like facedected
  • [16:56:29] <woglinde> or sobel
  • [16:58:11] <Mason> woglinde: so does it allow us to implement only fixed algorithms? or say if i'm doing a color tracking application, then can i use gstreamer to get the input video feed? or does it do the processing part?
  • [16:58:24] * likewise (~likewise@42-81-ftth.onsneteindhoven.nl) Quit (Quit: likewise)
  • [17:00:37] <woglinde> hm okay
  • [17:02:40] <_av500_> Mason: http://26-26-54.hardwarebug.org/30
  • [17:03:33] <Mason> :D
  • [17:03:39] * rcranetx (~rcranetx@nat/ti/x-lgqzuquhxfnztylx) has joined #beagle
  • [17:04:36] <woglinde> hm I still wonder why the debian packages have opencv plugins disabled
  • [17:04:50] <Mason> I agree with you, sir. my biggest short-coming is that i'm not into the CS side of things, and I am concentrating more on using opencv to develop my programs and applications for my project. i'm only trying to speed things up using the dsp if i can, else my programs do work pretty well.
  • [17:04:56] <koen> _av500_: gst-opencv allows you to use a small set of functions from opencv inside a gst pipeline
  • [17:05:03] * mlip is now known as mlip|aw
  • [17:05:28] <koen> _av500_: e.g. v4lsource ! ffmpegcolorspace ! facedetect ! ffmpegcolorspace ! v4l2sink
  • [17:05:47] * arun_ (~arun@unaffiliated/sindian) Quit (Ping timeout: 250 seconds)
  • [17:05:48] <koen> _av500_: as you might have noticed, it expects RGB
  • [17:06:11] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [17:06:51] * kblin (~kai@samba/team/kai) Quit (Ping timeout: 240 seconds)
  • [17:06:58] * kblin (~kai@kblin.org) has joined #beagle
  • [17:10:27] <_av500_> Mason: drop the sir please
  • [17:10:41] <_av500_> koen: ic
  • [17:11:01] <Mason> okay! :)
  • [17:11:19] <_av500_> Mason: so what gst-opencv does and what pramods stuff does are 2 different things
  • [17:11:28] <prpplague> koen: dont make me get upset with you - http://imagebin.org/150829
  • [17:12:02] <_av500_> one uses parts of opencv inside gst, the other uses the dsp for parts of opencv
  • [17:12:29] <koen> prpplague: I remember the sharp sticks as well
  • [17:12:41] * _koen_ (~x0115699@nat/ti/x-uaaqrtrjcgdyyspt) has joined #beagle
  • [17:12:46] <_av500_> prpplague: kids running away screaming? or dying of laughter?
  • [17:14:22] * pcacjr (~pcacjr@unaffiliated/pcacjr) Quit (Ping timeout: 246 seconds)
  • [17:15:05] <Mason> av500: okay. so let us say if i were to use gstreamer to get a video stream from the source, for eg a webcam, then it would be faster than the standard cvCaptureFromCAM function? [PS: I do know that OpenCV has V4L modules. :) just asking out of curiosity.]
  • [17:17:12] * A22 (75c4434a@gateway/web/freenode/ip.117.196.67.74) has joined #beagle
  • [17:17:20] * [IDC]Dragon__ spots _av500_
  • [17:18:10] <_av500_> Mason: why would it be faster?
  • [17:18:34] * arun_ (~arun@unaffiliated/sindian) has joined #beagle
  • [17:18:37] <_av500_> getting a cam image from v4l is not that hard
  • [17:18:53] <_av500_> there is even an example file somewhere
  • [17:19:01] <Mason> i dont know if it would be faster, and hence i'm asking. :)
  • [17:19:04] * jevin_ (~jevin@184.17.65.84) Quit (Quit: jevin_)
  • [17:19:51] <Mason> well, acc to the opencv intel manual, cvCaptureFromCAM takes V4L as a parameter when we call the function. i guess that would be the method.
  • [17:20:38] * borillion (~borillion@adsl-76-211-225-142.dsl.pltn13.sbcglobal.net) Quit (Ping timeout: 276 seconds)
  • [17:21:16] <Mason> what do you think?
  • [17:23:16] * BlInK311 (~Ward@ool-44c42324.dyn.optonline.net) has joined #beagle
  • [17:23:51] <Mason> av500: ?
  • [17:24:18] <Mason> i definitely do intend to try and figure out. just bouncing about ideas here. :)
  • [17:25:10] * peabody124 (~peabody12@c-98-196-22-185.hsd1.tx.comcast.net) Quit (Quit: peabody124)
  • [17:25:40] <_av500_> Mason: i have no idea, i use neither opencv nor gst :)
  • [17:26:00] <Mason> okay.
  • [17:28:22] <woglinde> av500 sure for v4l opencv has a plugin
  • [17:28:27] <woglinde> but for nothing else
  • [17:28:58] * [IDC]Dragon__ (~hohensohn@a89-182-71-128.net-htp.de) Quit (Quit: Ex-Chat)
  • [17:29:05] <_av500_> woglinde: i understand that ppl use opencv and v4l, so i was puzzled by the question....
  • [17:31:43] <Mason> djlewis: any opinion on this matter?
  • [17:32:53] <_av500_> Mason: since opencv can capture from v4l2, why dont you just use it?
  • [17:33:18] <_av500_> then, if you find out that it spends too much time during capture, you can start looking for alternatives
  • [17:33:30] <_av500_> but only then,,,
  • [17:34:04] <Mason> i am going to! program ready! just waiting for tomorrow so that i can get to an LCD tv and check how it works. :)
  • [17:34:22] <_av500_> good
  • [17:34:30] <Mason> as i said, i'm just asking people to know what they think. :) i'm not asking for a solution!
  • [17:34:46] * pcacjr (~pcacjr@186.215.206.130) has joined #beagle
  • [17:34:46] * pcacjr (~pcacjr@186.215.206.130) Quit (Changing host)
  • [17:34:46] * pcacjr (~pcacjr@unaffiliated/pcacjr) has joined #beagle
  • [17:35:59] <Mason> i've also heard about people using SDL for capturing for that matter, but that is something i dont want to go into. woglinde's earlier suggestion about using V4L sounds better.
  • [17:36:41] * mlip|aw is now known as mlip
  • [17:36:47] <A22> mason: PPF
  • [17:37:31] <Mason> A22: excuse me?
  • [17:38:04] <A22> u r RAjanikant
  • [17:47:36] <woglinde> args
  • [17:47:40] <woglinde> stupid opencv
  • [17:47:45] <woglinde> is using lrint in header
  • [17:49:57] <A22> i hav to make project which involve video processing (any thing encodin/decoding/ any algorithm) on DSP of BB-xm . any idea Friend??. i have a few days & complete project otherwise i will be completed by prof.
  • [17:50:14] <woglinde> a22 what?
  • [17:51:27] <A22> woglinde: want a project which run on DSP of BB-xm.
  • [17:52:03] <dm8tbr> in 'a few days'? bwahahaha
  • [17:52:09] <woglinde> and where is your problem?
  • [17:52:40] <Mason> woglinde: lrint eats up processing power in casting from floating to int, is that so?
  • [17:53:01] <woglinde> mason the error is to use it in header file
  • [17:53:11] <woglinde> and forget -lm in the .pc file
  • [17:53:14] <Mason> aha.
  • [17:53:37] <Mason> any way we can solve this issue?
  • [17:53:39] <A22> i m using BB-xm but i m not using DSP in my application . so want any idea or program anything which run on DSP of BB-xm??
  • [17:53:56] <woglinde> gst-ti
  • [17:54:09] <A22> gst-ti??
  • [17:54:13] <A22> what is that?
  • [17:54:28] <woglinde> gstreamer from ti?
  • [17:54:34] <woglinde> with dsp accel?
  • [17:55:24] <woglinde> and now I understand why the debian maintainer didnt enabled it
  • [17:55:33] <woglinde> but he could fix this easily too
  • [17:57:13] <A22> GStreamer DMAI plug-in??
  • [17:59:02] <A22> woglinde: using gst-ti , what can i do??
  • [17:59:34] <A22> means which type of project or program i can make......
  • [17:59:38] <woglinde> using the dsp?
  • [18:00:08] <A22> yes
  • [18:01:32] <A22> woglinde: yes, using the DSP ..
  • [18:04:20] <A22> .
  • [18:05:04] <woglinde> yes
  • [18:05:09] <woglinde> thats what you wanted
  • [18:05:15] <woglinde> using the dsp
  • [18:06:41] * rcranetx (~rcranetx@nat/ti/x-lgqzuquhxfnztylx) Quit (Ping timeout: 240 seconds)
  • [18:06:44] <A22> but using the dsp what can i do with dsp-ti? can u any application name ?
  • [18:07:51] <woglinde> using gstreamer?
  • [18:08:02] <woglinde> which uses dsp
  • [18:08:16] * jayabharath (~jayabhara@nat/ti/x-pjlfwmczfazfdtrr) Quit (Ping timeout: 246 seconds)
  • [18:08:20] <A22> k
  • [18:09:17] <Mason> woglinde: i thought gstreamer doesnt use dsp?
  • [18:09:40] <woglinde> the opencv dont uses the dsp
  • [18:10:02] <woglinde> +plugin
  • [18:10:20] <Mason> oh okay
  • [18:10:24] <Mason> :)
  • [18:11:09] * woglinde looks of we build the opencv plugin in oe
  • [18:11:43] <woglinde> yes we do
  • [18:11:44] <woglinde> good
  • [18:13:28] * rcranetx (~rcranetx@nat/ti/x-rxrckhkcbjyczqyw) has joined #beagle
  • [18:14:24] <_av500_> http://26-26-54.hardwarebug.org/43
  • [18:14:41] * Xerion (~xerion@5419A4D7.cm-5-2c.dynamic.ziggo.nl) Quit (Ping timeout: 250 seconds)
  • [18:15:39] * Xerion (~xerion@5419A4D7.cm-5-2c.dynamic.ziggo.nl) has joined #beagle
  • [18:15:56] <mlip> :)
  • [18:16:10] <Mason> :)
  • [18:16:53] <A22> i wish too :)
  • [18:17:54] <A22> he is hitler
  • [18:19:02] <woglinde> 26+26 is hitler?
  • [18:19:06] <woglinde> nice try
  • [18:19:12] <woglinde> but you are wrong
  • [18:19:43] <A22> ?
  • [18:20:06] <woglinde> !
  • [18:20:20] <woglinde> av500 I just forgot
  • [18:20:23] <woglinde> its friday
  • [18:21:42] * Mason (75feb43a@gateway/web/freenode/ip.117.254.180.58) has left #beagle
  • [18:23:15] <A22> here saturday now..
  • [18:24:54] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Quit: Leaving)
  • [18:29:04] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
  • [18:30:05] <Crofton> hmm, I guess that means I should shower and get dressed
  • [18:31:29] * peabody124 (~peabody12@128.249.96.123) has joined #beagle
  • [18:33:34] <woglinde> crofotn for what?
  • [18:35:12] * jeremychang (~jeremy@61.57.131.211) Quit (Quit: ??????)
  • [18:35:14] <koen> woglinde: normal people don't need a reason for that :)
  • [18:36:58] <djlewis_> What! there are noemal people on irc?
  • [18:37:02] <djlewis_> normal
  • [18:38:06] * lesterwm (~mike@137.112.146.114) Quit (Read error: Connection reset by peer)
  • [18:38:25] <_av500_> woglinde: for damage, for what else?
  • [18:38:53] * MikeLester (~mike@137.112.146.114) Quit (Read error: Connection reset by peer)
  • [18:39:34] * inx (~inx@95.209.85.249.bredband.tre.se) Quit (Remote host closed the connection)
  • [18:40:10] <woglinde> maybee his wife comes home
  • [18:42:20] * mlip is now known as mlip|aw
  • [18:43:02] <A22> :)
  • [18:43:47] <A22> what is diff. between gst-dmai & gst-openmax?
  • [18:44:12] <koen> one is actually used in real life, the other implements a khronos standard
  • [18:44:35] <woglinde> *g*
  • [18:44:39] <woglinde> that eas diplomatic
  • [18:44:44] <woglinde> ups was
  • [18:50:24] <_av500_> is that jk? https://meego.com/sites/all/files/users/admin/5644438725_840a0459b0.jpg
  • [18:50:34] <woglinde> jk?
  • [18:50:38] <woglinde> jkridner?
  • [18:54:19] <_av500_> yes
  • [18:54:31] <_av500_> on the right
  • [18:55:04] * tegila (~tegila@189-041-118-233.xd-dynamic.ctbcnetsuper.com.br) has joined #beagle
  • [18:55:54] * frank (58e4d301@gateway/web/freenode/ip.88.228.211.1) has joined #beagle
  • [18:56:15] <frank> hi, i need help for using Narcissus to build angstrom image. what should i select (options from narcissus web page) to build image running on beagleboard, Anybody knows?
  • [18:58:02] * katier (~katierh@nat/ti/x-zwofqxkdlvszbbrw) Quit (Ping timeout: 240 seconds)
  • [18:58:11] <woglinde> frank machine beagleboard?
  • [18:58:20] <A22> ;)
  • [18:58:36] <frank> yes
  • [18:58:37] * jayabharath (~jayabhara@nat/ti/x-xhtjmntzbywufwui) has joined #beagle
  • [18:58:49] * katier (~katierh@nat/ti/x-nhlpbgwkkjdotgxq) has joined #beagle
  • [19:00:17] <woglinde> burgs
  • [19:00:19] <woglinde> symbol av_get_random_seed, version LIBAVUTIL_50 not defined in file
  • [19:03:24] <A22> gst-dsp Vs gst-dmai
  • [19:03:38] <woglinde> ?
  • [19:04:01] <woglinde> gst-ti is using dmai which is using codecengine which is using dsplink
  • [19:04:08] <woglinde> thats it
  • [19:04:19] <_av500_> which is using XDM and XDAIS codecs
  • [19:04:38] <woglinde> pff
  • [19:06:09] * frank (58e4d301@gateway/web/freenode/ip.88.228.211.1) Quit (Quit: Page closed)
  • [19:09:43] <A22> https://gstreamer.ti.com/gf/project/gstreamer_ti/frs/?action=&br_pkgrlssort_by=release_name&br_pkgrlssort_order=desc
  • [19:10:48] * rcranetx (~rcranetx@nat/ti/x-rxrckhkcbjyczqyw) Quit (Ping timeout: 260 seconds)
  • [19:11:25] * likewise (~likewise@095-097-098-131.static.chello.nl) has joined #beagle
  • [19:11:42] <A22> i m going to download " gst-ti-plugin-full-1.02.00.tar.gz"
  • [19:11:49] <A22> & install it on BB-xm
  • [19:12:32] <A22> This package contains open-source base components required to build and run GStreamer on TI DaVinci platforms, as well as a plugin that provides GStreamer elements that interfaces with Codec Engine.
  • [19:12:58] <_av500_> yes, thats the one
  • [19:13:23] <A22> but there is gstreamer-0.10.25 in that ..
  • [19:13:25] <koen> A22: why not opkg install gstreamer-ti ?
  • [19:14:30] <A22> koen: giving me "UNKNOWN PACKAGE"
  • [19:14:34] <koen> (judging from the questions you ask, you're not up to building and patching it yourself)
  • [19:14:45] <koen> I doubt that
  • [19:14:52] <koen> opkg doesn't output in all caps
  • [19:15:41] <A22> Unknow package K?
  • [19:15:46] * koen tries on the beagle on his desk
  • [19:15:55] <koen> yep, works beautifully
  • [19:16:03] <koen> A22: you did do an 'opkg update', right?
  • [19:16:23] <A22> yes
  • [19:17:50] * likewise (~likewise@095-097-098-131.static.chello.nl) Quit (Quit: likewise)
  • [19:17:55] <koen> and that update didn't show any errors?
  • [19:18:15] <A22> Nope
  • [19:21:13] <A22> koen: http://imagebin.org/150845
  • [19:22:32] <A22> _av500_ : there is gstreamer-0.10.25 in that .so will it work or i hav to install higher version like 0.10.30 ??
  • [19:23:20] <woglinde> he has only sakoman feeds
  • [19:23:28] <woglinde> no wonder he finds nothing
  • [19:25:17] <A22> therefore i m going to download & install "gst-ti-plugin-full-1.02.00.tar.gz" manaully ..
  • [19:25:28] <woglinde> o.O
  • [19:26:27] <_av500_> A22: I know nothing about gstreamer
  • [19:26:37] <A22> keon told me b4 to use opkg install gstreamer-ti ,i tries too but it didn't work......
  • [19:26:51] <A22> _av500_ : K
  • [19:26:59] <woglinde> a22 because you dont have angstroem feed in
  • [19:27:01] <woglinde> only sakoman
  • [19:27:14] <A22> yes
  • [19:27:31] <woglinde> now guess where the gstreamer-ti packages live
  • [19:27:44] <woglinde> in sakoman or in angstroem feeds?
  • [19:27:45] <A22> Angstrom feed
  • [19:28:03] * tegila (~tegila@189-041-118-233.xd-dynamic.ctbcnetsuper.com.br) Quit (Quit: Leaving.)
  • [19:29:26] * rcranetx (~rcranetx@nat/ti/x-gtxrrbepbgtljpms) has joined #beagle
  • [19:29:59] <A22> woglinde tell me 1 thing after installing "gst-ti-plugin-full-1.02.00.tar.gz" , if i decode any video file , it will be on DSP for EX:- gst-launch -v filesrc location=sample.264 ! TIViddec2 codecName=h264dec engineName=codecServer ! TIDmaiVideoSink videoStd=VGA videoOutput=LCD sync=false , it should be work on DSP , m i right???
  • [19:30:25] <_av500_> yes, TIViddec2 is a dsp codec
  • [19:31:24] <woglinde> hm wasn there another sink for beagle?
  • [19:31:37] <_av500_> there are so many
  • [19:32:20] <_av500_> koen: "apt-get opkg upgrade" does not work here...
  • [19:33:48] <A22> _av500_ : like..
  • [19:33:54] <A22> abt sink..
  • [19:34:19] <_av500_> quoi?
  • [19:34:27] <A22> i know one & only one "TIDmaiVideoSink"
  • [19:34:36] * l4 (~l4@78-62-153-222.static.zebra.lt) Quit (Quit: Leaving.)
  • [19:34:45] <A22> quoi??
  • [19:34:50] * Luca256 (~coelho@88.115.104.185) Quit (Ping timeout: 258 seconds)
  • [19:35:22] * ddompe (~ddompe@201.196.107.110) has joined #beagle
  • [19:35:32] <_av500_> A22: there are other gst video sinks
  • [19:36:15] <_av500_> A22: anyway, since you just need to show that you use the dsp, why worry about what sink it is....
  • [19:36:34] <woglinde> If you are using Angstrom distribution on beagleboard then you can use "omapdmaifbsink" instead of "TIDmaiVideoSink" to display the video inside the X windowing system.
  • [19:36:37] <woglinde> there it is
  • [19:36:43] <woglinde> http://processors.wiki.ti.com/index.php/Example_GStreamer_Pipelines
  • [19:37:01] <_av500_> woglinde: is that the memcpy one?
  • [19:37:03] * jconnoll1 (~jconnolly@66.43.64.66) has joined #beagle
  • [19:37:03] <A22> i have read it
  • [19:37:23] <_av500_> and why is one camelCase and the otherisnot?
  • [19:38:52] <woglinde> hm intressting got the exmaple running
  • [19:39:06] <woglinde> but it dont regconizes the example
  • [19:39:07] <woglinde> haha
  • [19:39:10] <woglinde> face
  • [19:40:11] * rcranetx (~rcranetx@nat/ti/x-gtxrrbepbgtljpms) Quit (Ping timeout: 276 seconds)
  • [19:41:42] * jconnoll1 (~jconnolly@66.43.64.66) Quit (Remote host closed the connection)
  • [19:42:12] <woglinde> lets try the other example
  • [19:45:30] <A22> if i want to get video from webcam & same time display that video on other side (using Gstreamer only{by Encoding/Decoding}), what to do 4 that? i m just asking . .
  • [19:45:46] * torez (~torez@linaro/torez) has joined #beagle
  • [19:45:48] * negril (~negril@2002:bcc0:631f:0:21f:d0ff:fed4:7584) Quit (Ping timeout: 260 seconds)
  • [19:46:46] <woglinde> pipeline
  • [19:46:56] * jconnolly (~jconnolly@66.43.64.66) has joined #beagle
  • [19:47:13] * torez (~torez@linaro/torez) Quit (Read error: Connection reset by peer)
  • [19:48:10] <A22> can u tell in detail ?
  • [19:48:10] * Luca256 (~coelho@a88-115-104-185.elisa-laajakaista.fi) has joined #beagle
  • [19:48:48] <woglinde> no
  • [19:48:55] <woglinde> find out the pipline yourself
  • [19:48:57] <A22> k
  • [19:49:14] * BlInK311 (~Ward@ool-44c42324.dyn.optonline.net) Quit (Quit: Leaving)
  • [19:49:21] * negril (~negril@2002:bcc0:631f:0:21f:d0ff:fed4:7584) has joined #beagle
  • [19:53:02] * rcn-ee (~voodoo@thief-pool3-55.mncable.net) Quit (Remote host closed the connection)
  • [19:54:18] * OrazioTortuga (~user@host107-156-dynamic.1-79-r.retail.telecomitalia.it) has joined #beagle
  • [20:00:36] <A22> woglinde atleast tell me abt which pipelines r u talking .. this is also pipeline "gst-launch -v filesrc location=sample_ntsc_D1.mpeg4 ! TIViddec2 engineName=codecServer codecName=mpeg4dec ! TIDmaiVideoSink videoStd=D1_NTSC videoOutput=COMPOSITE sync=FALS" is n't it ??
  • [20:01:00] * dl9pf_ (~quassel@p5B215A84.dip.t-dialin.net) has joined #beagle
  • [20:01:32] <thurbad> is there any reason that uboot compiled with the cross-compiler used by bitbake would be incompatible with a kernel created with bitbake?
  • [20:01:39] <woglinde> whoop
  • [20:01:42] <woglinde> templematch works
  • [20:01:48] <woglinde> ups template match
  • [20:02:00] * dl9pf (~quassel@opensuse/member/dl9pf) Quit (Ping timeout: 263 seconds)
  • [20:04:42] <_av500_> A22: yes, this is also a pipeline
  • [20:05:04] <_av500_> one that wants to output on composite/NTSC it seems
  • [20:05:14] <_av500_> NTD3: ^^^^
  • [20:05:44] <woglinde> av500 templatematch works
  • [20:05:49] <_av500_> A22: why dont you finally opkg install that gstreamer-ti and start playing with it?
  • [20:06:03] <_av500_> av500: what match??
  • [20:06:14] <_av500_> thurbad: what`
  • [20:06:15] <woglinde> av500 gst-opencv
  • [20:06:19] <_av500_> ah
  • [20:06:31] <_av500_> thurbad: what?
  • [20:06:41] <woglinde> but the facereg seems works worser
  • [20:06:51] <_av500_> thurbad: you can always verify it by running on stock BB
  • [20:06:59] <_av500_> woglinde: worse :)
  • [20:07:32] <thurbad> no we're using CUS packaging
  • [20:07:47] <_av500_> thurbad: yes, but oe will allow you to build for BB and your HW
  • [20:07:58] <_av500_> so you can rule out toolchain issues
  • [20:07:58] * phantoxe (~destroy@a95-92-86-197.cpe.netcabo.pt) has joined #beagle
  • [20:08:15] <_av500_> its not like gcc will bug on a cpu package....
  • [20:08:51] <thurbad> I'm just at my wit's end here ;'(
  • [20:09:41] <thurbad> I've modified the sources to use a CUS package already
  • [20:11:11] <thurbad> I originally tried the stock BB kernel and it complained about a machine ID mismatch between uboot and the kernel
  • [20:11:48] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Ping timeout: 260 seconds)
  • [20:11:50] * djlewis_1 (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
  • [20:12:04] <djlewis_1> damn self rebooting computer!
  • [20:12:19] <thurbad> I got that fixed but still can't get past the message "done, booting the kernel"
  • [20:13:18] <_av500_> thurbad: you ran a stock kernel on your hw?
  • [20:13:33] <_av500_> and it complained hpw?
  • [20:13:35] <_av500_> how?
  • [20:14:05] <thurbad> http://pastebin.com/pM6W4gkq
  • [20:14:31] <_av500_> context?
  • [20:14:35] <_av500_> the kernel prints that?
  • [20:14:43] <_av500_> after done booting?
  • [20:16:07] <thurbad> that message appears after the message "done, booting the kernel" but I'm not certain that uboot has completed the handoff
  • [20:17:33] <_av500_> the msg is from the kernel
  • [20:17:44] <_av500_> linux/arch/arm/kernel/head-common.S
  • [20:17:59] <thurbad> hmm, so it's getting into the kernel, but not running
  • [20:18:04] <_av500_> yes
  • [20:18:11] <_av500_> kernel crashes somewhere
  • [20:18:19] <thurbad> well at least that's something
  • [20:18:38] <_av500_> so, since kernel has a serial setup at that time you can printf your way out of there
  • [20:18:48] <_av500_> or toggle a gpio with a led
  • [20:18:54] <_av500_> or jtag
  • [20:19:11] <_av500_> printf or jtag is what we do here usually
  • [20:19:31] * ZeZu (~null@c-98-227-57-1.hsd1.in.comcast.net) has joined #beagle
  • [20:19:36] <thurbad> it doesn't seem to be getting into the the board init section as none of the printk's I put in there print back
  • [20:19:56] <_av500_> thurbad: and CONFIG_DEBUG_LL is enabled?
  • [20:20:13] <thurbad> yes, that's how I got the mismatch message to show
  • [20:20:41] <_av500_> thurbad: so, mismatch with your kernel and see if it reaches that point
  • [20:21:10] <thurbad> ok, I'll try that
  • [20:21:24] <_av500_> or mod the source to alwayy error there...
  • [20:21:43] <_av500_> adding a printf in asm code is also not hard
  • [20:21:45] <koen> A22: if you want to use the DSP, use plain angstrom
  • [20:21:46] <_av500_> see the file
  • [20:22:46] <thurbad> does printf work in the kernel, or just printk?
  • [20:23:10] <_av500_> thurbad: printf is a generic term
  • [20:23:21] <woglinde> so my wife updates to natty
  • [20:23:21] <thurbad> ah, fair enough
  • [20:23:29] <_av500_> for this debugging technique
  • [20:23:46] <_av500_> woglinde: you can update your wife?
  • [20:23:53] <woglinde> yeah
  • [20:24:06] <woglinde> launcher and dashboard
  • [20:24:16] <woglinde> than
  • [20:24:39] <thurbad> yes, but they will uninstall if you try running girlfriend at the same time.... bah dum puh
  • [20:25:02] <_av500_> thurbad: run girlfriend in a VM
  • [20:25:12] <_av500_> that way you can try several...
  • [20:25:20] <thurbad> they'll fight over usb then
  • [20:25:44] <_av500_> universal shoe business?
  • [20:25:55] <thurbad> yeah, something like that
  • [20:26:52] * woglinde_ (~heinold@f052228142.adsl.alicedsl.de) has joined #beagle
  • [20:27:11] * _koen_ (~x0115699@nat/ti/x-uaaqrtrjcgdyyspt) Quit (Ping timeout: 252 seconds)
  • [20:27:22] * peabody124 (~peabody12@128.249.96.123) Quit (Quit: peabody124)
  • [20:27:50] <thurbad> yup I still get that error if I mismatch them on purpose
  • [20:28:10] <_av500_> ok, so it happens asfter that
  • [20:30:10] * woglinde (~heinold@g225006194.adsl.alicedsl.de) Quit (Ping timeout: 264 seconds)
  • [20:31:56] * woglinde_ is now known as wogline
  • [20:32:01] * wogline is now known as woglinde
  • [20:33:34] * djlewis1 (~bubba@adsl-65-64-30-12.dsl.ltrkar.swbell.net) has joined #beagle
  • [20:34:35] * negril (~negril@2002:bcc0:631f:0:21f:d0ff:fed4:7584) Quit (Read error: Operation timed out)
  • [20:34:43] * negril (~negril@2002:bcc0:631f:0:21f:d0ff:fed4:7584) has joined #beagle
  • [20:34:48] * djlewis_1 (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Ping timeout: 240 seconds)
  • [20:37:36] <_av500_> koen: cant you cut a long story short by making a demo image with opencv and gst-ti?
  • [20:38:30] <_av500_> and we sell that as a cmputer vision SDK :)
  • [20:38:41] <woglinde> *g*
  • [20:39:00] <djlewis1> then people wouldn't need either any longer
  • [20:39:11] <_av500_> woglinde: you have not replied for the owlboard
  • [20:39:21] <djlewis1> it would go away like a "murphy" thing
  • [20:39:34] <_av500_> djlewis1: that is my intent :)
  • [20:39:48] <djlewis1> yeah
  • [20:41:16] <woglinde> av500 for what?
  • [20:41:31] <_av500_> woglinde: our new project, the owlboard
  • [20:41:41] <woglinde> uhm
  • [20:41:46] <_av500_> its a BB with 2 usb cameras and opencv preinstalled :)
  • [20:41:47] <woglinde> free as in beer?
  • [20:41:58] <_av500_> we will be rich $$$$
  • [20:42:05] <woglinde> hm
  • [20:42:17] <woglinde> we would have at least 10 customers
  • [20:42:37] <_av500_> and we ask double for students with projects due in a week....
  • [20:43:12] <_av500_> woglinde: I will write a dsp based green detector for it as well
  • [20:44:32] <woglinde> *g*
  • [20:44:34] * flo_lap (~fuchs@sign-4d0947d6.pool.mediaWays.net) has joined #beagle
  • [20:44:34] * flo_lap (~fuchs@sign-4d0947d6.pool.mediaWays.net) Quit (Changing host)
  • [20:44:34] * flo_lap (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [20:45:15] <_av500_> and it will have ntsc video output hardwired
  • [20:47:14] * alcy (~chatzilla@122.179.39.209) has joined #beagle
  • [20:48:25] <alcy> folks, just wanted to ask if there still are images around for the c3 boards - particularly the debian one
  • [20:48:27] <A22> _av500_ : i m using sakoman . can u tell me what is IP add of BB-xm by default??
  • [20:48:42] <djlewis1> no default IP
  • [20:49:02] <_av500_> A22: why not use stock angstrom?
  • [20:49:42] <djlewis1> A22: configure it for static IP and it will remain the same each boot.
  • [20:51:20] <A22> i hav tried but after that net was disable . i hav tried 2-3 times such thing , isn't it weird ?
  • [20:52:11] <A22> once i assign static Ip, opkg doesn't work...
  • [20:53:53] <djlewis1> A22: you are defining your gateway and DNS?
  • [20:54:05] * CMoH (~cipi@unaffiliated/c-moh) has joined #beagle
  • [20:54:51] <A22> i m defining gateway but not DNS
  • [20:55:29] <_av500_> A22: why not use stock angstrom?
  • [20:56:04] <A22> i don't want
  • [20:56:42] <A22> i like sakoman , i hav Angstrom Os on other SD card too..
  • [20:57:36] <_av500_> well then...
  • [20:58:34] * jayabharath (~jayabhara@nat/ti/x-xhtjmntzbywufwui) Quit (Quit: bye)
  • [21:01:23] <djlewis1> A22: stick to your guns, Don't let them pressure you ;)
  • [21:06:06] <_av500_> djlewis1: I actually dont care :)
  • [21:06:09] <_av500_> I use neither :)
  • [21:06:25] * b7500af1 (~vt@2001:468:c80:4240:21c:bfff:fe8b:9c32) Quit (Quit: Leaving)
  • [21:06:51] <_av500_> but then, I dont have a project due in a week...
  • [21:07:44] <A22> djlewis1 : i hav image on which net is not working after assigning static IP
  • [21:09:02] <djlewis1> _av500_: hmm, another late comer taking on too large a project in too short a time huh
  • [21:09:22] <A22> djlewis : how can i enble internet on that image now?
  • [21:09:35] <djlewis1> did you enter your DNS yet?
  • [21:10:02] <A22> no
  • [21:10:06] <djlewis1> or in a pinch put it back on dhcp and use it
  • [21:10:27] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) Quit (Excess Flood)
  • [21:10:30] <A22> not getting you
  • [21:10:32] <_av500_> yeah, what is wrong with dhcp?
  • [21:10:38] <djlewis1> hehee
  • [21:10:58] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  • [21:10:58] <_av500_> A22: why do you now worry about a static ip?
  • [21:11:05] <_av500_> dont you have more urgent matters?
  • [21:11:56] <A22> bcoz i want to use vncviewer or Desktop viewer
  • [21:12:05] <_av500_> and?
  • [21:12:16] <_av500_> ifconfig will tell you happily the IP
  • [21:12:21] <A22> for that we have to give IP add. to Beagleboard
  • [21:12:44] <_av500_> dhcp will give you an ip
  • [21:14:22] <A22> after doing ifconfig USB0 192.168.1.1 netmask 255.255.255.0 on my beagleboard , my internet on BB is not running
  • [21:14:27] <A22> got it ?
  • [21:14:45] <_av500_> 1) get an ip via dhcp
  • [21:14:53] <_av500_> 2) run ifconfig to print the IP
  • [21:14:53] <A22> how
  • [21:14:59] <_av500_> 3) use that ip in vnc
  • [21:15:07] <_av500_> how what?
  • [21:15:11] <djlewis1> A22: 1.1 is often a router IP
  • [21:15:20] <_av500_> yeah, 1,1.....
  • [21:15:30] <_av500_> A22: sakoman does not do dhcp?
  • [21:15:52] <A22> i hav Angstrom having same probelm
  • [21:16:23] <_av500_> A22: your internet works before you do ifconfig, right?
  • [21:16:25] * kevinsc (~a0214685@nat/ti/x-uritvbpibpgduruy) Quit (Remote host closed the connection)
  • [21:16:28] <_av500_> so you have an IP
  • [21:16:34] <_av500_> then where is the problem?
  • [21:16:39] * flo_lap is now known as florian
  • [21:16:54] <A22> yea b4 work
  • [21:17:15] <_av500_> so, where is the issue?
  • [21:17:20] <_av500_> you have an ip
  • [21:17:25] <_av500_> enter it in vnc...
  • [21:17:50] <A22> it can't
  • [21:17:57] <_av500_> why?
  • [21:18:09] <A22> i hav tried diff Ip add ...
  • [21:18:10] <_av500_> what ip do you get?
  • [21:18:13] <A22> don't know
  • [21:18:26] <A22> its weird .
  • [21:18:29] <_av500_> ifconfig will tell yoi
  • [21:18:31] <_av500_> you
  • [21:18:40] <A22> i know
  • [21:18:43] * thurbad (~nate@64.132.24.248) Quit (Ping timeout: 258 seconds)
  • [21:18:46] <_av500_> and?
  • [21:19:05] <A22> 192.168.1.1
  • [21:19:11] <_av500_> nah
  • [21:19:21] <A22> usb0
  • [21:19:49] <_av500_> what does it printf after "inet addr:"?
  • [21:20:20] <A22> 192.168.1.1
  • [21:20:54] <_av500_> after you did: ifconfig USB0 192.168.1.1 netmask 255.255.255.0, right?
  • [21:21:18] <_av500_> A22: what is the IP you get from ifconfig when internet works
  • [21:21:26] * _av500_ is getting bored
  • [21:22:14] * mctouch (~mctouch@cpc17-sgyl28-2-0-cust34.sgyl.cable.virginmedia.com) Quit (Quit: Leaving...)
  • [21:22:15] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [21:22:22] <A22> that time i did not assign IP to BB
  • [21:22:36] <A22> directly use Opkg ....
  • [21:22:38] * Openfree^ (~Openfree`@61.170.193.222) Quit (Ping timeout: 260 seconds)
  • [21:22:40] <A22> & its work
  • [21:22:45] <_av500_> yes, and what is thew IP?
  • [21:22:52] <_av500_> type: ifconfig ENTER
  • [21:23:18] * pcacjr_ (~pcacjr@unaffiliated/pcacjr) has joined #beagle
  • [21:23:29] <A22> nothing
  • [21:23:39] <_av500_> nothing?
  • [21:23:41] <A22> as no default IP
  • [21:24:06] <A22> i hav checked on other image
  • [21:26:03] <A22> may be my ethernet port is not working . i m currently using internet on USB port
  • [21:26:28] <_av500_> your internet "works" but you have no IP....
  • [21:26:43] <_av500_> well, since you have magic internet access, I would not tinker with it...
  • [21:28:13] <jacekowski> IPoA maybe
  • [21:28:19] <A22> ya. i m also shocked
  • [21:30:06] * gustavoz (~gustavoz@host20.186-109-4.telecom.net.ar) Quit (Quit: Leaving)
  • [21:30:21] * rcranetx (~rcranetx@nat/ti/x-muvgkbelasyevsbc) has joined #beagle
  • [21:30:23] <A22> _av500_ : http://imagebin.org/150860
  • [21:30:44] * mpoirier (~quassel@S0106002369de4dac.cg.shawcable.net) Quit (Read error: Operation timed out)
  • [21:30:54] <_av500_> you have an ip
  • [21:31:15] <_av500_> i asked you for "inet addr:"
  • [21:31:19] <_av500_> you said "nothing"
  • [21:31:20] * CMoH (~cipi@unaffiliated/c-moh) Quit (Read error: Connection reset by peer)
  • [21:31:23] <jacekowski> on lo
  • [21:31:25] <_av500_> I see "something"
  • [21:31:41] <jacekowski> not on ethernet
  • [21:31:42] <_av500_> no, on usb0
  • [21:31:51] <jacekowski> no
  • [21:32:02] <jacekowski> he doesn't have ip on usb0
  • [21:32:17] <A22> yea
  • [21:32:20] <jacekowski> A22: route
  • [21:32:25] <_av500_> jacekowski: what is the string that statrs with "fe80:...."
  • [21:32:25] <A22> still internet working
  • [21:32:31] <_av500_> starts
  • [21:32:34] <jacekowski> av500: ipv6
  • [21:32:37] <_av500_> and?
  • [21:32:41] <_av500_> thta is not IP?
  • [21:32:44] <jacekowski> no
  • [21:32:51] <_av500_> ok, gn
  • [21:32:54] <jacekowski> that's ipv6
  • [21:33:17] <jacekowski> different protocol doing same thing using similiar names
  • [21:33:19] <A22> _av500_ i hav not assigned static IP & still internet working
  • [21:33:28] <A22> got it _av500_ ??
  • [21:33:42] * prpplague (~danders@nat/ti/x-cduejagmbobzpcxd) Quit (Quit: Leaving)
  • [21:33:55] <_av500_> A22: you have a dynamic IP
  • [21:34:09] <A22> k
  • [21:34:20] <jacekowski> no
  • [21:34:29] <A22> ???
  • [21:34:34] <_av500_> A22: please ask jacekowski, he knows better...
  • [21:34:36] <jacekowski> ifconfig
  • [21:34:39] <_av500_> bye
  • [21:34:45] <jacekowski> show us your routes
  • [21:35:02] * mctouch (~mctouch@cpc17-sgyl28-2-0-cust34.sgyl.cable.virginmedia.com) has joined #beagle
  • [21:35:06] <A22> wat?
  • [21:35:21] <A22> wat & how??
  • [21:35:30] <jacekowski> just type route
  • [21:35:37] <jacekowski> or ip r s
  • [21:37:21] <A22> http://imagebin.org/150861
  • [21:37:26] <A22> jacekowski: http://imagebin.org/150861
  • [21:37:38] * rsalveti (~rsalveti@201.82.68.14) Quit (Ping timeout: 240 seconds)
  • [21:38:11] <jacekowski> pffff
  • [21:38:21] <jacekowski> you have stuff working via eth0
  • [21:38:25] <jacekowski> not usb0
  • [21:39:11] * rsalveti (~rsalveti@201.82.68.14) has joined #beagle
  • [21:39:14] <A22> i m using internet on USB port of BB-xm
  • [21:39:33] <jacekowski> nopw
  • [21:39:38] <A22> K
  • [21:39:49] <jacekowski> you are using it via ethernet interface
  • [21:40:09] <A22> k
  • [21:40:45] <jacekowski> my train started moving
  • [21:41:02] <A22> can we try on other image in which internet is not working ?
  • [21:41:03] * alcy (~chatzilla@122.179.39.209) Quit (Ping timeout: 260 seconds)
  • [21:41:05] <jacekowski> so i'm probably going to lose connection soon
  • [21:41:26] <A22> & find solution y net is not working
  • [21:41:40] <A22> 5 min
  • [21:41:57] <jacekowski> type ifconfig eth0
  • [21:42:29] <A22> sorry insert diff. SD card
  • [21:42:59] <A22> in this image , internet is not working
  • [21:43:32] <jacekowski> because you have no ethernet/dhcp support
  • [21:43:54] <jacekowski> ygo back to working card
  • [21:44:14] <A22> how can i work..
  • [21:44:22] <woglinde> hm gst and textoverlay makes fun
  • [21:44:23] <jacekowski> and type ifconfig eth0
  • [21:44:28] <woglinde> and templatematch
  • [21:44:55] * thurbad (~nate@64.132.24.248) has joined #beagle
  • [21:44:59] <A22> k
  • [21:45:02] * ssc|home__ (~ssc@port-92-203-79-134.dynamic.qsc.de) has joined #beagle
  • [21:46:13] <A22> jacekowski: http://imagebin.org/150863
  • [21:48:23] * ssc|home_ (~ssc@port-92-203-120-170.dynamic.qsc.de) Quit (Ping timeout: 248 seconds)
  • [21:48:24] <jacekowski> i said on working card
  • [21:48:51] <A22> K
  • [21:48:54] <A22> just 2 min
  • [21:49:44] <A22> but y net is not working on that card?? do u have any idea or solution ??
  • [21:49:58] * ZeZu (~null@c-98-227-57-1.hsd1.in.comcast.net) Quit (Ping timeout: 240 seconds)
  • [21:50:34] * risca (~risca@m90-130-202-17.cust.tele2.se) has joined #beagle
  • [21:50:49] <A22> jacekowski: http://imagebin.org/150864
  • [21:50:52] <jacekowski> probably no dhcp client running
  • [21:51:32] <A22> means..
  • [21:52:01] <jacekowski> start not working card
  • [21:52:07] <A22> k
  • [21:53:10] <A22> on that recently i hav done "ifconfig eht0 192.168.1.x" "ifconfig usb0 192.168.1.x"
  • [21:53:13] <jacekowski> and type dhcp then press tab and check if it autocompletes it
  • [21:53:25] <A22> booting.....
  • [21:53:38] <A22> it is taking more time
  • [21:53:44] <A22> too much installd
  • [21:53:45] <jacekowski> correct command may be dhcpclient udhcpcd dhcpcd or one similiar
  • [21:54:07] <jacekowski> there is like million different dhcp clients
  • [21:54:45] * jrmuizel_ (~jrmuizel@rrcs-71-41-122-186.se.biz.rr.com) has joined #beagle
  • [21:54:54] <A22> what to write?
  • [21:55:00] <A22> "dhcp'??
  • [21:55:09] <jacekowski> after you find out which one is the one you have installed you have to type - that command eth0
  • [21:55:13] <jacekowski> yes
  • [21:55:17] <jacekowski> and press tab
  • [21:55:19] <jacekowski> twice
  • [21:55:35] <jacekowski> it should give you list
  • [21:55:40] <A22> dhcp: command not found
  • [21:55:58] <jacekowski> i never said press enter
  • [21:56:35] <A22> wat then?
  • [21:56:36] * iry (~irytwo@99-25-90-177.lightspeed.hstntx.sbcglobal.net) Quit (Quit: -poof-)
  • [21:56:38] <A22> TAB??
  • [21:56:54] <jacekowski> yes
  • [21:56:59] <jacekowski> twice
  • [21:57:24] <A22> dhcprelay coming
  • [21:57:32] <A22> now press Enter??
  • [21:57:37] <jacekowski> dhcp<tab><tab>
  • [21:57:43] <jacekowski> no
  • [21:57:51] <jacekowski> that's not the one
  • [21:58:09] <A22> i m doing dhcp<tab><tab>
  • [21:58:13] * pcacjr (~pcacjr@unaffiliated/pcacjr) Quit (Ping timeout: 260 seconds)
  • [21:58:40] <jacekowski> try udhcp
  • [21:58:50] <A22> write dhcp then press tab so it come dhcprelay automatically
  • [21:58:57] * killring (~killring@76.226.163.105) has joined #beagle
  • [21:59:12] * alcy (~chatzilla@122.179.39.209) has joined #beagle
  • [21:59:19] <A22> nothing ..
  • [21:59:28] <A22> udhcp nothing....
  • [21:59:38] <jacekowski> hmm
  • [21:59:46] <jacekowski> then do it manually
  • [22:00:07] * pcacjr (~pcacjr@177.17.54.150) has joined #beagle
  • [22:00:07] * pcacjr (~pcacjr@177.17.54.150) Quit (Changing host)
  • [22:00:07] * pcacjr (~pcacjr@unaffiliated/pcacjr) has joined #beagle
  • [22:00:08] <A22> wat manaully??
  • [22:00:26] <woglinde> ifconfig
  • [22:00:27] <jacekowski> ifconfig eth0 192.168.1.3
  • [22:00:28] <woglinde> route
  • [22:00:32] <woglinde> or ip
  • [22:00:46] <jacekowski> to set your ip
  • [22:01:06] <jacekowski> and hmm i don't remember how to set routing with roue
  • [22:01:21] <jacekowski> i've been using iproute2 for too long
  • [22:02:05] <jacekowski> iirc it was route add 0.0.0.0 gw 192.168.1.1
  • [22:02:08] <woglinde> route add
  • [22:02:16] <woglinde> default gw
  • [22:03:59] * mctouch (~mctouch@cpc17-sgyl28-2-0-cust34.sgyl.cable.virginmedia.com) Quit (Quit: Leaving...)
  • [22:04:28] <A22> route add "which add" gw 192.168.1.1
  • [22:04:41] <A22> simple 0.0.0.0 or default
  • [22:04:43] <A22> ??
  • [22:04:49] <jacekowski> default
  • [22:05:11] <A22> done
  • [22:05:21] <jacekowski> it should work now
  • [22:05:35] * OrazioTortuga (~user@host107-156-dynamic.1-79-r.retail.telecomitalia.it) Quit (Ping timeout: 240 seconds)
  • [22:06:00] <woglinde> ping
  • [22:06:01] <A22> jacekowski: http://imagebin.org/150867
  • [22:07:06] <jacekowski> i don't see route add there
  • [22:07:25] <jacekowski> ehhhhhhhh
  • [22:07:38] <jacekowski> just do udhcpc eth0
  • [22:08:30] <A22> k
  • [22:09:42] * DaveDavenport (~qball@unaffiliated/qball) Quit (Ping timeout: 258 seconds)
  • [22:10:04] * OrazioTortuga (~user@host228-100-dynamic.180-80-r.retail.telecomitalia.it) has joined #beagle
  • [22:10:14] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [22:10:53] <A22> jacekowski: http://imagebin.org/150869
  • [22:11:58] <jacekowski> hmmm
  • [22:12:15] <jacekowski> dunno
  • [22:12:34] <jacekowski> and i have to get of the train
  • [22:12:43] <A22> k
  • [22:12:51] <A22> thank you very muck
  • [22:12:58] <jacekowski> i'll be at home later
  • [22:12:59] <A22> * much
  • [22:13:23] <jacekowski> but you have to setup your routing manually and check if it's working
  • [22:13:38] <A22> how?
  • [22:14:11] <A22> you can go man. bye
  • [22:14:21] <woglinde> route add
  • [22:14:34] <A22> k
  • [22:14:47] <A22> i hav tried
  • [22:14:55] <woglinde> ifconfig on beagle
  • [22:14:55] <A22> but not working.
  • [22:15:05] <woglinde> do you have xm?
  • [22:15:12] <A22> yes
  • [22:15:31] <woglinde> and the lights are on?
  • [22:15:38] <woglinde> from the ethernetcard?
  • [22:15:47] * alcy (~chatzilla@122.179.39.209) Quit (Read error: Connection reset by peer)
  • [22:16:07] <A22> woglinde: http://imagebin.org/150870
  • [22:17:18] <A22> i m trying to use internet on USB port of BB-xm . i m not using Ethernet cable
  • [22:17:43] * trelane` (~trelane@funtoo/staff/trelane) Quit (Ping timeout: 248 seconds)
  • [22:18:44] <A22> woglinde: watch this too http://imagebin.org/150872
  • [22:20:24] <A22> woglinde: helllo..
  • [22:24:32] * eFfeM (~frans@j200125.upc-j.chello.nl) Quit (Quit: Leaving.)
  • [22:32:06] <A22> .
  • [22:36:20] * risca (~risca@m90-130-202-17.cust.tele2.se) Quit (Quit: L?mnar)
  • [22:40:04] * jrmuizel_ (~jrmuizel@rrcs-71-41-122-186.se.biz.rr.com) Quit (Quit: jrmuizel_)
  • [22:41:13] * jrmuizel_ (~jrmuizel@rrcs-71-41-122-186.se.biz.rr.com) has joined #beagle
  • [22:41:13] * jrmuizel_ (~jrmuizel@rrcs-71-41-122-186.se.biz.rr.com) Quit (Client Quit)
  • [22:41:14] * ZeZu (~null@c-98-227-57-1.hsd1.in.comcast.net) has joined #beagle
  • [22:44:11] <woglinde> ah eth vs usb
  • [22:44:17] <woglinde> udhcpc usb0
  • [22:44:32] * thurbad (~nate@64.132.24.248) Quit (Quit: Ex-Chat)
  • [22:50:53] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Quit: Verlassend)
  • [22:51:29] * awozniak (~awozniak@adsl-76-205-222-174.dsl.snlo01.sbcglobal.net) Quit (Quit: Leaving)
  • [22:51:46] <jacekowski> ehh
  • [22:51:48] <jacekowski> no he's not
  • [22:51:49] <A22> woglinde: http://imagebin.org/150878
  • [22:51:57] <A22> jacekowski: hi
  • [22:51:58] <jacekowski> on his working config he has internet from ethernet card
  • [22:52:15] <jacekowski> is your ethernet cable plugged in?
  • [22:52:19] * jkridner|work (~a0321898@nat/ti/x-posoywgnbirlcwea) has joined #beagle
  • [22:52:30] <A22> i m using internet on USB port of BB-xm not from ethernet port......
  • [22:52:44] <jacekowski> is your ethernet cable plugged in?4
  • [22:52:55] <A22> no
  • [22:53:11] <jacekowski> so why there are recieved packets on your ethernet interface?
  • [22:53:40] <jacekowski> why on previous pictures you had eth0 configured and routing setup via eth0
  • [22:54:13] <jacekowski> to get internet via usb0 you have to setup your computer first
  • [22:54:15] <jacekowski> and then beagle
  • [22:54:26] <A22> i m using this cable
  • [22:54:28] <A22> http://www.google.co.in/imgres?imgurl=http://img.zdnet.com/techDirectory/USB.GIF&imgrefurl=http://www.zdnet.com/topics/usb&usg=__yn6wirB-zOLjX6hLbNCMfLQSuOY=&h=332&w=452&sz=11&hl=en&start=52&zoom=1&tbnid=BI_q8YhHrjDJCM:&tbnh=118&tbnw=161&ei=hEG7TZFDh_a_A6H8_csF&prev=/search%3Fq%3Dmini%2BB%2Bto%2BA%26um%3D1%26hl%3Den%26client%3Dfirefox-a%26sa%3DN%26rls%3Dcom.ubuntu:en-US:unofficial%26biw%3D1024%26bih%3D545%26tbm%3Disch0%2C1197&um=1&itbs=1
  • [22:54:33] <woglinde> *sigh*
  • [22:54:46] <woglinde> you will have to nat your bb
  • [22:55:10] <A22> type B at my modem & type A at USB port of BB-xm
  • [22:55:26] <jacekowski> ehhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
  • [22:55:30] <jacekowski> fucking hell
  • [22:55:34] <jacekowski> seriously?
  • [22:55:40] <jacekowski> it's not usb0 then
  • [22:55:45] <jacekowski> usb0 is for usb networking
  • [22:55:54] <jacekowski> what you have is modem behaving like a network card probabl
  • [22:55:57] <jacekowski> usb network card
  • [22:56:15] <jacekowski> lsusb
  • [22:56:25] <jacekowski> show me what lsusb is giving you
  • [22:56:28] <jacekowski> and ifconfig -a
  • [22:56:42] <jacekowski> and use pastebin.com not image pasting thing
  • [22:57:22] <A22> http://imagebin.org/150882
  • [22:57:48] <A22> i can't paste word here so sorry ...
  • [22:58:11] <jacekowski> not here, to pastebin.com
  • [22:58:20] <A22> http://imagebin.org/150883
  • [22:58:42] <jacekowski> http://imagebin.org/150882
  • [22:58:56] <jacekowski> unplug your modem
  • [22:58:58] <jacekowski> and do same thing
  • [22:59:02] * lyakh (~lyakh@pD9EB9180.dip0.t-ipconnect.de) Quit (Quit: thanks, bye)
  • [22:59:03] * jkridner|work (~a0321898@nat/ti/x-posoywgnbirlcwea) Quit (Remote host closed the connection)
  • [22:59:20] <A22> K
  • [23:00:07] <A22> http://imagebin.org/150884
  • [23:01:06] * djlewis1 (~bubba@adsl-65-64-30-12.dsl.ltrkar.swbell.net) Quit (Quit: Leaving.)
  • [23:01:49] <jacekowski> plug it back in start working image and do ifconfig -a there
  • [23:02:28] <A22> k
  • [23:04:03] <A22> http://imagebin.org/150886
  • [23:04:52] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) Quit (Excess Flood)
  • [23:05:26] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  • [23:05:44] <A22> jacekowski: what happend?
  • [23:06:00] <jacekowski> where?
  • [23:06:30] <A22> in working imahe:- ifconfig -a :-> /media/Angstrom/boot/uImage-2.6.32
  • [23:06:39] <A22> sorry
  • [23:06:47] <A22> in working imahe:- ifconfig -a http://imagebin.org/150886
  • [23:06:49] <jacekowski> lsusb?
  • [23:07:29] <A22> same as in not working card
  • [23:08:09] <jacekowski> do you have that modem plugged in now?
  • [23:08:27] <A22> yes
  • [23:08:56] <jacekowski> do you have that broadcom corp. ppirelli remote ndis device on the list?
  • [23:09:06] <A22> yes
  • [23:09:10] <jacekowski> hmmm
  • [23:09:11] <jacekowski> strange
  • [23:09:14] <jacekowski> unplug it
  • [23:09:16] <jacekowski> and plug it back in
  • [23:09:19] <jacekowski> and then do ifconfig -a
  • [23:09:20] <A22> k
  • [23:10:37] <A22> diff this time
  • [23:10:59] <A22> http://imagebin.org/150887
  • [23:11:29] <jacekowski> dmesg now
  • [23:11:50] <A22> done
  • [23:12:10] <jacekowski> what does it say?
  • [23:12:22] <A22> long list
  • [23:12:29] <jacekowski> pastebin.com
  • [23:13:36] <A22> dude i m using gtk-term in which we can't copy or paste. so i can't send bulk data on pastebin.
  • [23:14:24] <jacekowski> just selecting piece of text copies it
  • [23:14:56] <A22> just 2 min
  • [23:14:57] <jacekowski> or ctrl + insert does it
  • [23:17:03] <A22> i hav new Angstrom image. do u want to try on that? internet is not working here
  • [23:17:24] <A22> 1st time boot image
  • [23:17:33] <A22> nothing do with this image
  • [23:17:37] <jacekowski> i want to see at least last 10 lines of dmesg
  • [23:17:48] <jacekowski> and then boot that not working image
  • [23:17:54] <A22> k
  • [23:19:32] <woglinde> good bnite
  • [23:19:44] * woglinde (~heinold@f052228142.adsl.alicedsl.de) Quit (Quit: good ite)
  • [23:19:52] <A22> http://imagebin.org/150892
  • [23:20:13] <A22> jacekowski: http://imagebin.org/150892 dmesg
  • [23:20:57] <jacekowski> now start that not working image
  • [23:22:03] <A22> not working image 1.old 2.new
  • [23:22:07] <A22> tell me
  • [23:22:18] <A22> which do u want?
  • [23:22:21] <jacekowski> old
  • [23:22:25] <A22> k
  • [23:25:18] <A22> http://imagebin.org/150894
  • [23:26:00] <A22> & this http://imagebin.org/150896
  • [23:26:36] <jacekowski> unplug it and plug it back in and show me that dmesg again
  • [23:28:10] <A22> when i plug again i m getting http://imagebin.org/150897
  • [23:28:22] <A22> not dmesg
  • [23:28:54] <A22> last line "eth0 not ready"
  • [23:29:03] <A22> like that
  • [23:30:24] <A22> i hav ethernet cable now . my friend is bringing.do u want try on that??
  • [23:31:01] <A22> jacekowski: i hav ethernet cable now . my friend is bringing.do u want try on that??
  • [23:31:05] <jacekowski> no
  • [23:31:09] <A22> k
  • [23:32:04] * thurbad (~nate@rrcs-97-79-173-242.sw.biz.rr.com) has joined #beagle
  • [23:32:10] <A22> not working "NEW" image do u want try on that?????
  • [23:32:50] <jacekowski> now type
  • [23:32:58] <jacekowski> ifconfig eth0 192.168.1.1
  • [23:33:00] <jacekowski> ifconfig eth0 192.168.1.3
  • [23:33:10] <jacekowski> route add default gw 192.168.1.1
  • [23:33:53] <A22> done
  • [23:34:06] <jacekowski> try ping now
  • [23:34:26] <A22> not working
  • [23:35:09] <jacekowski> ifconfig eth0 up
  • [23:35:12] <jacekowski> and try now
  • [23:35:27] <A22> done
  • [23:35:47] <A22> now wat?
  • [23:35:53] <jacekowski> ping
  • [23:36:06] <A22> not working
  • [23:36:35] <jacekowski> hmmm
  • [23:36:39] <jacekowski> strange
  • [23:36:54] <A22> lets try on new image(going to boot 1st time) with ethernet cable
  • [23:36:57] <A22> k?
  • [23:37:11] <jacekowski> ok
  • [23:37:36] <A22> ifconfig usb0 192.168.1.3 & route add default gw 192.168.1.1
  • [23:38:01] <A22> for that i have to disconncet my PC from modem in short net
  • [23:38:13] <A22> so plz wait for 5 min
  • [23:38:15] <A22> k??
  • [23:38:53] <A22> i m testing , i m telling u result in 5 min . just disconnecting net from Pc for 5 min
  • [23:43:40] <jacekowski> not usb
  • [23:43:41] <jacekowski> eth
  • [23:44:12] * A22 (75c4434a@gateway/web/freenode/ip.117.196.67.74) Quit (Ping timeout: 252 seconds)
  • [23:44:15] * A22_ (75c44292@gateway/web/freenode/ip.117.196.66.146) has joined #beagle
  • [23:45:28] <A22_> jacekowski: http://imagebin.org/150901
  • [23:46:01] <jacekowski> ehhh
  • [23:46:08] <jacekowski> 01:43 < jacekowski> not usb
  • [23:46:08] <jacekowski> 01:43 < jacekowski> eth
  • [23:46:17] <jacekowski> ifconfig usb0 down
  • [23:46:18] <jacekowski> ifconfig usb0 0.0.0.0
  • [23:46:22] <jacekowski> ifconfig eth0 192.168.1.3
  • [23:46:30] <A22_> this time i hav connected ethernet cable
  • [23:46:32] <jacekowski> forget about usb0
  • [23:46:58] <A22_> "ethernet cable" at ethernet port
  • [23:47:21] <A22_> let connect mini a to B
  • [23:48:37] <A22_> & route add default gw xxxxxxx??
  • [23:48:55] <A22_> 192.168.1.1
  • [23:49:25] <A22_> still ping not working
  • [23:49:32] <jacekowski> show ifconfig -a again
  • [23:50:25] <A22_> http://imagebin.org/150903
  • [23:52:00] <A22_> hey wat do u think?
  • [23:52:10] <A22_> its weird.
  • [23:52:22] <jacekowski> ok
  • [23:52:30] <A22_> ?
  • [23:52:34] <jacekowski> route now
  • [23:53:30] <A22_> http://imagebin.org/150904
  • [23:54:38] <A22_> ??
  • [23:55:04] <jacekowski> is it working now?
  • [23:55:26] <A22_> of course not
  • [23:55:56] <A22_> what r you doing on Beagelboard-xm??
  • [23:56:15] <A22_> or beagleboard?
  • [23:56:35] <jacekowski> i have old beagle c3
  • [23:56:38] <jacekowski> but hmm
  • [23:56:59] <jacekowski> if it's not working now then it's probably drivers issue
  • [23:57:41] <A22_> but in Both Angstrom images?
  • [23:57:53] * ddompe (~ddompe@201.196.107.110) Quit (Quit: ddompe is leaving)
  • [23:57:56] <A22_> how can i fix?
  • [23:58:03] <A22_>
  • [23:58:04] <A22_>
  • [23:58:12] <jacekowski> different kernel
  • [23:58:23] * ZeZu (~null@c-98-227-57-1.hsd1.in.comcast.net) Quit (Ping timeout: 252 seconds)
  • [23:58:43] <jacekowski> thing is i could probably fix it if i would have your setup in front of me in less than 30 minutes
  • [23:59:01] <A22_> what have you done with ur beagleboard c3, opencv,Gstreamer , what????
  • [23:59:18] <jacekowski> 3 phase power analyser