• [00:00:11] <mru> noway_: on beagle, ls /sys/devices/platform/musb_hdrc
  • [00:00:15] <mru> what does that say?
  • [00:02:28] <noway_> ls: cannot access /sys/devices/platform/musb_hdrc: No such file or directory
  • [00:03:08] * noway_ (~29e313f9@gateway/web/freenode/x-cekammskohwjyhoj) Quit (Quit: Page closed)
  • [00:03:14] * andruk (~chatzilla@unaffiliated/andruk) Quit (Ping timeout: 246 seconds)
  • [00:03:28] * noway (~29e313f9@gateway/web/freenode/x-fzhiqryqlxdnokjn) has joined #beagle
  • [00:07:32] <mru> noway: well, that's a problem...
  • [00:08:17] <mru> try modprobe musb_hdrc
  • [00:09:45] * pablo (~pablo@201.250.183.115) has joined #beagle
  • [00:09:50] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [00:10:08] <noway> mru : FATAL: Module musb_hdrc not found.
  • [00:10:20] * pablo (~pablo@201.250.183.115) Quit (Client Quit)
  • [00:10:41] <mru> dmesg | grep musb
  • [00:13:51] * likewise (~likewise@82-171-51-231.ip.telfort.nl) Quit (Remote host closed the connection)
  • [00:13:59] <noway> mru : http://pastebin.com/n9iqhxhc
  • [00:14:03] <thurbad> he's using debian if that makes a difference
  • [00:14:42] * andruk (~chatzilla@unaffiliated/andruk) has joined #beagle
  • [00:14:59] <mru> noway: your otg port is in host mode
  • [00:15:12] <mru> what kernel version is that btw?
  • [00:15:14] <mru> looks a bit old
  • [00:15:17] <thurbad> damn...
  • [00:15:27] <noway> 2.6.32
  • [00:15:48] <mru> hmm, that's more or less what I'm running
  • [00:15:53] <mru> my output is a bit different
  • [00:16:06] <noway> which one ?
  • [00:16:12] <noway> are u using
  • [00:16:29] <mru> depends on which board...
  • [00:17:00] <noway> thanks anyway
  • [00:17:09] <noway> for you rhelp
  • [00:17:13] <mru> anyway, the driver is registering
  • [00:17:25] <mru> why doesn't it show in /sys...
  • [00:17:45] * noway (~29e313f9@gateway/web/freenode/x-fzhiqryqlxdnokjn) Quit (Quit: Page closed)
  • [00:17:53] * noway (~29e313f9@gateway/web/freenode/x-eddhwxirxferlhlx) has joined #beagle
  • [00:17:59] <noway> sys is empty
  • [00:18:06] <mru> did you mount it?
  • [00:18:10] <mru> you really, really should
  • [00:19:05] * GrizzlyAdams (~Grizzly@ip98-184-88-41.mc.at.cox.net) has joined #beagle
  • [00:20:37] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [00:20:53] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Quit: ppotera)
  • [00:22:35] * alecrim (~alecrim@189.2.128.130) Quit (Read error: Connection reset by peer)
  • [00:24:40] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [00:29:36] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [00:31:25] <pat_> Hi, I loaded Angstrom onto Beagleboard, but Iam not able to connect to internet. I am trying to connect through Ethernet cable which is connected to USB hub ethernet port.
  • [00:31:50] <pat_> Will there be any special I need to make in order to connect.
  • [00:32:32] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [00:32:38] <thurbad> is the device configured?
  • [00:35:02] <pat_> I have no idea how to configure it? any help is appreciated.
  • [00:37:04] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [00:37:39] <thurbad> do you know what interface it's using? ie eth0, usb0?
  • [00:39:19] <thurbad> is it connected to a router with dhcp enabled?
  • [00:42:38] <pat_> I think eth0,
  • [00:42:59] <wroberts1> does beagle board have ethernet?
  • [00:43:07] <DanaG> Not built-in.
  • [00:43:36] <wroberts1> is there an add-on?
  • [00:44:11] <DanaG> You can use USB to add ethernet. For example, there's a USB 2.0 3-port hub with a built-in "asix" USB-ethernet adapter.
  • [00:44:17] <thurbad> does ifconfig show anything for eth0?
  • [00:45:09] <wroberts1> good thing devkit8000 comes with DM9000
  • [00:45:19] <thurbad> if not it just may not be configured yet
  • [00:47:28] <pat_> ifconfig eht0 is showing some values, like Link encap, inet6 addr...
  • [00:47:45] * raster (~raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [00:49:40] * Sept (~bakljg@c-24-131-138-21.hsd1.mn.comcast.net) Quit (Read error: Connection reset by peer)
  • [00:49:41] <thurbad> ok, is it the only interface other than lo that's active?
  • [00:50:00] * Sept (~bakljg@c-24-131-138-21.hsd1.mn.comcast.net) has joined #beagle
  • [00:50:20] <pat_> yes
  • [00:51:17] <thurbad> can you ping 4.2.2.2
  • [00:53:22] <pat_> it is saying netwrok is unreachable
  • [00:53:38] <thurbad> ok, then it's not just a dns issue
  • [00:54:04] <thurbad> does /etc/init.d/networking restart fix anything?
  • [00:54:50] <thurbad> sometimes I have to do that to kick start the device my usb ethernet connection
  • [01:10:59] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Quit: ppotera)
  • [01:13:46] <andruk> rcn-ee: ping
  • [01:14:05] <rcn-ee> andruk, pong
  • [01:14:20] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [01:15:30] <andruk> rcn-ee: emeb helped me get spidev working, here's the instructions: http://members.cox.net/ebrombaugh1/embedded/beagle/index.html if you want, i can try to update the patch for 2.6.32.
  • [01:16:26] <rcn-ee> cool, its simpiler
  • [01:18:17] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [01:19:28] <andruk> rcn-ee: yeah
  • [01:19:45] * andruk will return in 2 hours...
  • [01:23:59] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [01:27:08] * william_zhang (~william@58.247.126.174) has joined #beagle
  • [02:02:20] * DaQatz (~db@c-66-30-48-150.hsd1.nh.comcast.net) Quit (Remote host closed the connection)
  • [02:02:49] <noway> rcn-ee : hi trying debian squeese i get an error in "Install the base system" Debootstrap Error Failed to install the base system The base system installation into /target/ failed, what should i do ?
  • [02:03:34] <noway> after this issue when i open the new partition created i find : media , debootstrap,var, etc when i reboot with the mmc on beagleboard i get [ 23.299102] Warning: unable to open an initial console. [ 23.305847] Kernel panic - not syncing: No init found.
  • [02:07:45] * jkridner (~a0321898@pdpc/supporter/active/jkridner) Quit (Ping timeout: 260 seconds)
  • [02:08:45] * jserv-- (~jserv@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [02:13:05] * robtow (~rob@12.156.66.34) Quit (Ping timeout: 246 seconds)
  • [02:13:20] * noway (~29e313f9@gateway/web/freenode/x-eddhwxirxferlhlx) Quit (Quit: Page closed)
  • [02:16:08] * jkridner (~a0321898@pdpc/supporter/active/jkridner) has joined #beagle
  • [02:18:09] * emeb (~ericb@ip72-223-81-194.ph.ph.cox.net) has left #beagle
  • [02:19:37] * djlewis (~djlewis@75.15.64.20) has joined #beagle
  • [02:22:44] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) Quit (Quit: Leaving)
  • [02:24:06] * emeb|mac (~ericb@ip72-223-81-194.ph.ph.cox.net) has joined #beagle
  • [02:24:47] * levi` (~user@levi.dsl.xmission.com) has joined #beagle
  • [02:28:43] * levi (~user@levi.dsl.xmission.com) Quit (Remote host closed the connection)
  • [02:43:44] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Remote host closed the connection)
  • [02:46:14] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [03:00:39] * cody_ (~cody@dslb-084-056-117-203.pools.arcor-ip.net) has joined #beagle
  • [03:01:44] * koen (~koen@s55917625.adsl.wanadoo.nl) Quit (Ping timeout: 240 seconds)
  • [03:02:25] * _koen_ (~x0115699@nat/ti/x-sfgbuowoucutpyev) Quit (Ping timeout: 264 seconds)
  • [03:03:44] * cody (~cody@dslb-084-056-069-188.pools.arcor-ip.net) Quit (Ping timeout: 240 seconds)
  • [03:26:47] * duffolonious (~bryan@75-168-96-194.mpls.qwest.net) Quit (Ping timeout: 276 seconds)
  • [03:26:51] * jkridner (~a0321898@pdpc/supporter/active/jkridner) Quit (Ping timeout: 260 seconds)
  • [03:28:35] * duffolonious (~bryan@75-168-96-194.mpls.qwest.net) has joined #beagle
  • [03:49:01] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) Quit (Ping timeout: 246 seconds)
  • [03:56:13] * aholler_ (~aholler@p57B22459.dip0.t-ipconnect.de) has joined #beagle
  • [03:59:56] * aholler (~aholler@p57B22D04.dip0.t-ipconnect.de) Quit (Ping timeout: 276 seconds)
  • [04:00:23] * GPSFan (~kenm@64.92.145.112) Quit (Quit: Leaving)
  • [04:02:46] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) Quit (Quit: Ex-Chat)
  • [04:04:49] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Quit: ppotera)
  • [04:14:48] * thaytan (~jan@ppp59-167-167-201.static.internode.on.net) has joined #beagle
  • [04:22:07] * janneg (~janne@chybek.jannau.net) Quit (Read error: Operation timed out)
  • [04:22:11] * janneg (~janne@chybek.jannau.net) has joined #beagle
  • [04:33:15] * BB_ (~86868949@gateway/web/freenode/x-facjnypoabcxsknt) has joined #beagle
  • [04:33:17] * ksinkar (~ksinkar@61.17.164.52) has joined #beagle
  • [04:35:38] <BB_> Hello, I am trying to get wget going but I am not able to connect, it looks like I have to setup my proxy server... can anyone shed some light?
  • [04:36:05] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Quit: jrmuizel)
  • [04:43:41] <thurbad> why would you need a proxy?
  • [04:44:16] <thurbad> how are you connecting to the internet?
  • [04:47:34] <BB_> so here's the problem, I have a beagle board setup in the lab, I am ssh'ing to it. I need to download a file on my beagle board hence I am using "Wget".
  • [04:48:29] <thurbad> why not scp if you can ssh in?
  • [04:48:44] <BB_> but for the wget is not connecting to the given URL, I am thinking I have to config my proxy... I am not sure if that's the right thing to do
  • [04:49:00] <BB_> scp?
  • [04:49:29] <thurbad> secure file copy, uses the same port/encryption as ssh
  • [04:50:01] <thurbad> it's sometimes referred to as sftp
  • [04:50:16] <thurbad> but scp is the shell command
  • [04:51:05] <BB_> cool, let me read about scp then I'll try it.
  • [04:51:47] * aditya_1111 (~Aditya@c-69-143-196-44.hsd1.md.comcast.net) has joined #beagle
  • [04:53:15] <thurbad> you may also be able to just open an sftp session in nautilus to access a folder on the beagle, then you can just drag and drop files
  • [04:56:00] <BB_> is this even possible "scp http://gcc-uk.internet.bs/releases/gcc-4.3.3/gcc-fortran-4.3.3.tar.bz2 /home/root" ?
  • [04:57:07] <thurbad> only if you have sh access to that server
  • [04:57:19] <BB_> I don't ;(
  • [04:57:28] <thurbad> however.. you can download the file locally and then transfer it
  • [04:58:06] <thurbad> can you ping 4.2.2.2 from the beagle?
  • [04:58:41] <BB_> yes
  • [04:58:44] <thurbad> if you can, can you ping google.com
  • [04:58:46] <BB_> what's 4.2.2.2?
  • [04:58:58] <thurbad> it's an open dns server
  • [04:59:33] <BB_> okay yes I can ping Google
  • [05:00:25] <thurbad> if you can ping google, you should be able to wget http://gcc-uk.internet.bs/releases/gcc-4.3.3/gcc-fortran-4.3.3.tar.bz2
  • [05:00:39] * mewyn (~mewyn@c-98-228-137-171.hsd1.il.comcast.net) Quit (Ping timeout: 260 seconds)
  • [05:01:42] <BB_> Actually I lied, I can't ping this is what I get root@beagleboard:~# ping www.google.com PING www.google.com (74.125.19.104): 56 data bytes....
  • [05:01:59] * jonmasters (~jcm@dallas.jonmasters.org) Quit (Read error: Operation timed out)
  • [05:03:36] <thurbad> interesting, so you can resolve domain names but can't actually connect?
  • [05:05:07] <BB_> I wonder if my environment variables have to be changed...
  • [05:05:10] <thurbad> are you connected through a pc or a router?
  • [05:06:45] <BB_> I am ssh'ing from my wireless laptop, so I would say a router
  • [05:07:21] <thurbad> are you using dhcp or a static address?
  • [05:08:01] * mewyn (~mewyn@c-98-228-137-171.hsd1.il.comcast.net) has joined #beagle
  • [05:08:56] <BB_> static address
  • [05:09:08] <aditya_1111> I am getting a bunch of these errors when my BB is booting: "end_request: I/O error, dev mtdblock0, sector 0" ... is this bad?
  • [05:09:37] <thurbad> nah, that just means you don't have your nand populated
  • [05:09:53] <aditya_1111> populated by/
  • [05:09:53] <aditya_1111> ?
  • [05:09:57] <javaJake> aditya_1111: totally normal
  • [05:10:19] <aditya_1111> why does it try to access it for no reason?
  • [05:10:28] <thurbad> if you're booting from SD, that's not completely normal
  • [05:10:37] <BB_> umm I just tried ipconfig -a on the terminal and I get "ipconfig not found" .... :(
  • [05:10:43] <thurbad> err, that is completely normal
  • [05:10:51] <DanaG> ifconfig
  • [05:10:57] <thurbad> ipconfig is a windows command
  • [05:10:58] <DanaG> ipconfig is windows. =??
  • [05:11:10] <BB_> ifconfig I meant
  • [05:13:15] * jonmasters (~jcm@dallas.jonmasters.org) has joined #beagle
  • [05:13:37] <javaJake> aditya_1111: you can correct it by setting up the NAND properly, but there's no point, and it's just ignored (which is what those errors are saying, in the end)
  • [05:13:51] <aditya_1111> hmm
  • [05:13:57] <aditya_1111> I used to just ignore them
  • [05:13:58] <javaJake> aditya_1111: I believe something is scanning all file-systems to create /dev nodes but I ould be wrong
  • [05:14:16] <aditya_1111> but now it just sits and hangs at these messages
  • [05:15:08] <thurbad> that's a different story...
  • [05:17:00] <aditya_1111> yeah hmm
  • [05:17:11] <thurbad> BB_, can you open up /etc/network/interfaces in a text editor and check the gateway for your ethernet connection?
  • [05:17:21] * BThompsonGR (~bernie@cpe-76-184-159-129.tx.res.rr.com) Quit (Read error: Connection reset by peer)
  • [05:17:59] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) Quit (Quit: Running with ???. And throwing ?????? at stuff. I ??? Unicode!)
  • [05:18:07] <thurbad> aditya_1111, does it say anything else if you look at the boot progress in a terminal?
  • [05:18:44] * alancam (~a-campbel@nat/ti/x-xxttpoebwsnqkirm) Quit (Ping timeout: 240 seconds)
  • [05:18:51] <thurbad> for instance is ti trying to boot from nand rather than SD?
  • [05:19:06] <aditya_1111> http://pastebin.com/TssRwZ9Q
  • [05:19:09] <aditya_1111> got that in the middle
  • [05:19:16] <aditya_1111> followed by more of the logical block stuff
  • [05:19:28] * hersh (~hersh@nat/ti/x-mwanvfhatleifezc) Quit (Ping timeout: 252 seconds)
  • [05:19:40] <BB_> okay I have the gateway value
  • [05:19:43] <aditya_1111> and then sits and hangs
  • [05:19:56] * alancam (~a-campbel@nat/ti/x-uztbdqnwvwqevpvz) has joined #beagle
  • [05:20:00] <thurbad> EXT3-fs error (device mmcblk0p2): ext3_journal_start_sb: Detected aborted journal <- that's the key message
  • [05:20:07] * hersh (~hersh@nat/ti/x-zqhegvactrgoidnr) has joined #beagle
  • [05:20:14] <thurbad> your SD rootfs is not clean
  • [05:20:48] <thurbad> mount it on a pc and scan it if you can
  • [05:21:47] <thurbad> BB_, does it match your router?
  • [05:23:02] <BB_> no it does not
  • [05:23:23] <thurbad> BB, it should
  • [05:23:57] <thurbad> aditya_1111, mtdblock0 is not your problem it's looking there because ti failed to mount your SD card properly
  • [05:24:39] <thurbad> if I misspell 'i't one more time I'm gonna cry ;'(
  • [05:24:50] <BB_> so here's what I did, I went to the cmd terminal typed ipconfig, it gave me three addresses: IP address, submask and default gateway. I am assuming the default gateway is my router.
  • [05:24:51] <thurbad> grr.. I did it again
  • [05:25:23] <thurbad> it should be, yes, if you're connected through the router
  • [05:26:13] <BB_> is that why the ifconfig command is not found of the beagleboard?
  • [05:27:19] <thurbad> actually, it might be showing the broadcast value which is not your router but usually ends with 255
  • [05:27:49] * GrizzlyAdams (~Grizzly@ip98-184-88-41.mc.at.cox.net) Quit (Quit: Leaving.)
  • [05:28:05] <thurbad> no, ifconfig should be in your path but might not be for some strange reason
  • [05:28:13] <av500> gm
  • [05:28:52] <thurbad> you can try /sbin/ifconfig instead if /sbin isn't in your path for some reason
  • [05:35:20] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) has joined #beagle
  • [05:39:18] <aditya_1111> does anyone here use a windows toolchain for bb development?
  • [05:44:26] * soman (~somnath@stargate.starnet.fi) has joined #beagle
  • [05:44:54] <BB_> I am logged in as "su" when I try /sbin it errors out with "permission denied"
  • [05:45:41] <BB_> But it has no problem calling /sbin/ifconfig
  • [05:45:59] * khasim (~a0393720@192.163.20.231) has joined #beagle
  • [05:47:36] <DanaG> /sbin is a directory.. you can't "run" a directory.
  • [05:48:59] <BB_> duh... I should get some fresh air...
  • [05:49:43] <thurbad> lol
  • [05:50:41] <thurbad> aditya_1111, is there such a thing?
  • [05:51:30] * BB_ (~86868949@gateway/web/freenode/x-facjnypoabcxsknt) Quit (Quit: Page closed)
  • [05:51:49] <thurbad> gcc for windows is pretty far behind gcc on linux, I think mingw is at version 3.4 or something similarly ancient
  • [05:52:00] * KosiNuss (~tom@p4FD1260A.dip0.t-ipconnect.de) has joined #beagle
  • [05:55:37] * jpirko (~jirka@ip-89-103-91-100.karneval.cz) has joined #beagle
  • [06:01:19] * markos_ (~markos@athedsl-434053.home.otenet.gr) has joined #beagle
  • [06:08:07] * khasim (~a0393720@192.163.20.231) Quit (Quit: Leaving.)
  • [06:08:33] * alancam (~a-campbel@nat/ti/x-uztbdqnwvwqevpvz) Quit ()
  • [06:08:58] * filip (~filip@filip.math.uni.lodz.pl) Quit (Ping timeout: 252 seconds)
  • [06:09:25] * filip (~filip@filip.math.uni.lodz.pl) has joined #beagle
  • [06:11:15] * ZeZu (~null@in-67-236-203-217.dhcp.embarqhsd.net) has joined #beagle
  • [06:11:31] * khasim (~a0393720@192.163.20.231) has joined #beagle
  • [06:13:31] * JamieBennett (~JamieBenn@Maemo/community/contributor/JamieBennett) has joined #beagle
  • [06:15:37] * djlewis (~djlewis@75.15.64.20) Quit (Ping timeout: 264 seconds)
  • [06:19:41] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) Quit (Quit: Running with ???. And throwing ?????? at stuff. I ??? Unicode!)
  • [06:19:56] * btr_26 (~5b08a7df@gateway/web/freenode/x-rfkgwvvwiaafdwic) has joined #beagle
  • [06:24:24] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) has joined #beagle
  • [06:28:47] * koen (~koen@s55917625.adsl.wanadoo.nl) has joined #beagle
  • [06:29:38] * jackman (~jackman@c-24-21-216-140.hsd1.or.comcast.net) Quit (Ping timeout: 265 seconds)
  • [06:30:01] * maqr (~maqr@httpcraft/hax) Quit (Ping timeout: 246 seconds)
  • [06:30:15] * jackman (~jackman@c-24-21-216-140.hsd1.or.comcast.net) has joined #beagle
  • [06:30:17] * Septalici (~bakljg@c-24-131-138-21.hsd1.mn.comcast.net) has joined #beagle
  • [06:30:33] * Sept (~bakljg@c-24-131-138-21.hsd1.mn.comcast.net) Quit (Ping timeout: 268 seconds)
  • [06:30:54] * htns (~htns@61.6.64.6) Quit (Read error: Connection reset by peer)
  • [06:31:36] * courville (~courville@sac91-1-82-232-88-182.fbx.proxad.net) has joined #beagle
  • [06:33:31] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) has joined #beagle
  • [06:35:25] * emeb|mac (~ericb@ip72-223-81-194.ph.ph.cox.net) Quit (Ping timeout: 264 seconds)
  • [06:37:01] * andruk (~chatzilla@unaffiliated/andruk) Quit (Quit: ChatZilla 0.9.86-rdmsoft [XULRunner 1.9.1.9/20100401213457])
  • [06:40:56] * maqr (~maqr@httpcraft/hax) has joined #beagle
  • [06:44:43] * ksinkar (~ksinkar@61.17.164.52) Quit (Ping timeout: 246 seconds)
  • [06:45:33] <ghoti> can anybody recommend a linux-compatible GSM900 USB modem? I'm particularly interested in something that doesn't draw much power, and can be powered off easily from the command line...
  • [06:48:55] <av500> E220
  • [06:49:49] <ghoti> Does the E220 use less power than the E180? They both seem to have the specs I need.
  • [06:49:57] <av500> no idea
  • [06:50:00] <ghoti> :)
  • [06:50:07] <av500> they are 3g modems, the all use a lot of power :)
  • [06:50:56] <ghoti> Hmm. All I need is to make periodic GSM or maybe GPRS data connections from a system powered by solar...
  • [06:52:26] <av500> there are "industrial" 2g/3g modem solutions
  • [06:52:57] * venkat (~ca36af83@gateway/web/freenode/x-ztkpafsqexcupvwu) has joined #beagle
  • [06:53:04] <mIKEjONES> av500: telit has somethings
  • [06:53:08] <mIKEjONES> gm862
  • [06:53:30] <mIKEjONES> it's definitely not 3g
  • [06:53:39] * jpirko (~jirka@ip-89-103-91-100.karneval.cz) Quit (Remote host closed the connection)
  • [06:53:40] <av500> http://www.sparkfun.com/commerce/categories.php?c=66
  • [06:54:22] <av500> 99, not even expensive
  • [06:55:27] <av500> http://www.sparkfun.com/commerce/product_info.php?products_id=9533
  • [06:55:35] <av500> $59, Off mode: <100uA
  • [06:59:32] * chi_ (~4e56e2d8@gateway/web/freenode/x-kslcggapnxphlkxi) has joined #beagle
  • [06:59:42] * chi_ (~4e56e2d8@gateway/web/freenode/x-kslcggapnxphlkxi) Quit (Client Quit)
  • [07:06:20] * _koen_ (~x0115699@nat/ti/x-awhxgfgsxqhbyqql) has joined #beagle
  • [07:06:43] * filip (~filip@filip.math.uni.lodz.pl) Quit (Ping timeout: 252 seconds)
  • [07:10:48] * courville (~courville@sac91-1-82-232-88-182.fbx.proxad.net) Quit (Ping timeout: 276 seconds)
  • [07:11:45] * courville (~courville@archos.rain.fr) has joined #beagle
  • [07:20:31] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) Quit (Ping timeout: 245 seconds)
  • [07:24:27] * aditya_1111 (~Aditya@c-69-143-196-44.hsd1.md.comcast.net) Quit (Ping timeout: 248 seconds)
  • [07:30:01] * rsalveti_ (~rsalveti@189.115.168.181.dynamic.adsl.gvt.net.br) has joined #beagle
  • [07:30:10] * venkat (~ca36af83@gateway/web/freenode/x-ztkpafsqexcupvwu) Quit (Quit: Page closed)
  • [07:30:31] * rsalveti (~rsalveti@187.59.113.66) Quit (Ping timeout: 245 seconds)
  • [07:32:26] <Vegar> wow
  • [07:32:36] * andruk (~chatzilla@unaffiliated/andruk) has joined #beagle
  • [07:32:38] <Vegar> that module is almost a full phone
  • [07:32:49] <av500> most of them are
  • [07:33:03] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) has joined #beagle
  • [07:33:05] <av500> since these chipsets are highly integrated
  • [07:33:08] <Vegar> neat
  • [07:35:09] * dougztr (~quassel@c-76-125-129-233.hsd1.pa.comcast.net) Quit (Quit: No Ping reply in 180 seconds.)
  • [07:35:12] * dougztr (~quassel@2001:4830:16e9:0:20a:e6ff:fed8:419e) has joined #beagle
  • [07:35:21] * florian_kc (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [07:35:56] * jackman (~jackman@c-24-21-216-140.hsd1.or.comcast.net) Quit (Ping timeout: 245 seconds)
  • [07:36:50] * florian_kc is now known as florian
  • [07:37:07] * jackman (~jackman@c-24-21-216-140.hsd1.or.comcast.net) has joined #beagle
  • [07:41:04] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) Quit (Ping timeout: 246 seconds)
  • [07:43:50] * tolbrino (~Adium@cpc2-walt14-2-0-cust112.know.cable.virginmedia.com) has joined #beagle
  • [07:49:07] * tolbrino (~Adium@cpc2-walt14-2-0-cust112.know.cable.virginmedia.com) Quit (Ping timeout: 276 seconds)
  • [07:49:22] * guillaum1 (~gl@AMontsouris-153-1-35-124.w90-2.abo.wanadoo.fr) Quit (Quit: Leaving.)
  • [07:52:11] * jpirko (~jirka@nat/redhat/x-btdrchxuwurjryjx) has joined #beagle
  • [07:59:18] * filip (~filip@filip.math.uni.lodz.pl) has joined #beagle
  • [08:00:31] * gdm (~gdm@190.55.34.222) Quit (Ping timeout: 245 seconds)
  • [08:03:46] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [08:06:07] * filip (~filip@filip.math.uni.lodz.pl) Quit (Ping timeout: 252 seconds)
  • [08:09:16] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Ping timeout: 276 seconds)
  • [08:19:09] * filip (~filip@filip.math.uni.lodz.pl) has joined #beagle
  • [08:21:53] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [08:27:39] * Try`0xff is now known as Tryum
  • [08:30:18] * KosiNuss (~tom@p4FD1260A.dip0.t-ipconnect.de) Quit (Remote host closed the connection)
  • [08:33:47] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) has joined #beagle
  • [08:34:34] * flo_lap (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [08:35:13] * flo_lap (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
  • [08:37:18] * ssvb (~ssvb___@a88-112-120-50.elisa-laajakaista.fi) Quit (Quit: Leaving)
  • [08:38:54] * likewise (~likewise@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [08:38:59] * tolbrino (~Adium@host213-123-170-251.in-addr.btopenworld.com) has joined #beagle
  • [08:40:56] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Ping timeout: 245 seconds)
  • [08:42:40] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) Quit (Read error: Operation timed out)
  • [08:47:50] * hrw|gone is now known as hrw
  • [08:47:55] <hrw> hi
  • [08:48:00] <av500> lo
  • [08:48:48] <adj> hi-Z
  • [08:49:08] <av500> 12V!
  • [08:49:59] <adj> you just fried it, happy now?
  • [08:52:08] * raster (~raster@enlightenment/developer/raster) has joined #beagle
  • [08:52:09] <dm8tbr> 230V
  • [08:53:35] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [08:55:17] <ghoti> av500, I've just spent an hour browsing sparkfun. thanks. :)
  • [08:55:29] <av500> np
  • [08:57:07] <dm8tbr> ghoti: do you know dealextreme yet? SCNR
  • [08:57:44] <ghoti> I think I'll start with USB, though; I have more clue with system stuff than electronics.
  • [08:58:14] <ghoti> dm8tbr, I've looked at DX before. Some impressive prices there.
  • [08:59:48] <av500> http://www.dealextreme.com/details.dx/sku.25085
  • [09:00:13] <DaveDavenport> and often very very very crappy stuff
  • [09:01:26] <ghoti> av500, that looks about my speed to start, though I don't know how to find out if my cell providers block invalid IMEIs.
  • [09:02:21] <av500> invalid? unknown you mean?
  • [09:03:03] <ghoti> Cons: - Adaptor has all-zeroes IMEI. Not a problem for me, but some cellular operators forbids such wrong IMEI.
  • [09:03:14] <av500> ah
  • [09:03:37] * neure (hguj4@xdsl-205-43.nblnetworks.fi) has joined #beagle
  • [09:03:59] <av500> ghoti: I guess you can get an E220/E180 for a start
  • [09:04:30] <av500> and you can add a switch in the usb5v line to power it down completely..
  • [09:05:03] <ghoti> http://www.dealextreme.com/details.dx/sku.12057 looks possible...
  • [09:06:36] <dm8tbr> .oO(and there goes another hour surfing that site)
  • [09:06:37] * neurre (~timo@xdsl-205-43.nblnetworks.fi) Quit (Ping timeout: 252 seconds)
  • [09:06:40] <ghoti> assuming it'll work in Linux, for which there's no indication
  • [09:06:43] <ghoti> ya, really.
  • [09:07:36] <av500> seems like a std usb serial using a prolific
  • [09:07:46] <av500> so AT commands over ttyUSBx
  • [09:08:10] <dm8tbr> mmmh horrific
  • [09:08:35] <av500> terrific!
  • [09:08:56] <ghoti> sorry for silly questions, but ... how does that work? Is there a standard number with every GSM provider that I dial to make a PPP connection?
  • [09:09:29] <av500> yes, some stf AT commands
  • [09:09:31] <av500> std
  • [09:09:39] <av500> to set apn/user/pwd
  • [09:09:41] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Ping timeout: 245 seconds)
  • [09:09:42] <av500> connect
  • [09:09:43] <av500> etc..
  • [09:09:50] <ghoti> then LCP sets everything up for me?
  • [09:10:02] <av500> lcp??
  • [09:10:04] <av500> lcp?
  • [09:10:24] <ghoti> IP address, MRU, etc?
  • [09:10:47] <ghoti> Or is IP set in ICP? It's been a while since I did any PPP. :)
  • [09:11:02] <av500> no idea
  • [09:11:48] <ghoti> Okay, so ... APN. I know the settings I use for that in my blackberry, so presumably the same ones will work for one of these devices.
  • [09:11:54] <ghoti> I guess I can afford $28 to test.
  • [09:12:05] <dm8tbr> ghoti: you just send a few AT commands and as soon as you see a CONNECT you just throw an PPPD at the device
  • [09:12:31] <av500> if the ash cloud lets you connect at all....
  • [09:13:05] <dm8tbr> maybe it was an ash-cloud and not an weatherbaloon over roswell then after all?
  • [09:13:54] <ghoti> maybe the ash cloud is just masking the approach of alien spacecraft towards Europe.
  • [09:14:44] <ghoti> they figured that coming in via wormhole, like they did over Norway a few months ago, generates too much publicity.
  • [09:15:12] <av500> they should have come when the ipad launched, nobody would have noticed...
  • [09:18:31] <dm8tbr> what maximum altitude can an ipad reach when launched?
  • [09:18:34] * hrw is now known as hrw|gone
  • [09:19:11] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [09:20:46] <ogra> dm8tbr, really depends on the amount of volcano ash ...
  • [09:24:58] <ghoti> I suspect Apple provides their own hot air.
  • [09:26:12] <ogra> lol
  • [09:30:25] * Phrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) has joined #beagle
  • [09:30:51] * RazZziel (~raziel@63.93.117.91.dynamic.mundo-r.com) Quit (Ping timeout: 248 seconds)
  • [09:31:23] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) has joined #beagle
  • [09:37:19] * raster (~raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [09:37:34] * Entasis (~Jarred@ppp118-210-175-167.lns20.adl6.internode.on.net) has joined #beagle
  • [09:46:41] * ant_work (~andrea@host214-85-static.34-85-b.business.telecomitalia.it) has joined #beagle
  • [09:53:03] * _roger_ (~a0740758@nat/ti/x-ignllvhxccsmperz) has joined #beagle
  • [10:06:32] <_koen_> XorA|gone: did you get a response to your bitbake mrror bugreport?
  • [10:17:02] * william_zhang (~william@58.247.126.174) Quit (Quit: Leaving)
  • [10:21:57] * courville (~courville@archos.rain.fr) Quit (Ping timeout: 260 seconds)
  • [10:23:30] * khasim (~a0393720@192.163.20.231) Quit (Quit: Leaving.)
  • [10:23:32] * courville (~courville@233-53.206-83.static-ip.oleane.fr) has joined #beagle
  • [10:29:05] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  • [10:29:31] * _roger_ (~a0740758@nat/ti/x-ignllvhxccsmperz) Quit (Ping timeout: 248 seconds)
  • [10:29:34] * ogra (~ogra@ubuntu/member/ogra) Quit (Read error: No route to host)
  • [10:30:32] * ogra_ is now known as ogra
  • [10:30:39] * ogra (~ogra@p5098ed03.dip0.t-ipconnect.de) Quit (Changing host)
  • [10:30:39] * ogra (~ogra@ubuntu/member/ogra) has joined #beagle
  • [10:31:47] * courville (~courville@233-53.206-83.static-ip.oleane.fr) Quit (Ping timeout: 258 seconds)
  • [10:33:58] * mcgeagh (~mcgeagh@xbmc/staff/mcgeagh) has joined #beagle
  • [10:36:11] * nlCortana (~johan@87.212.216.45) has joined #beagle
  • [10:48:33] * courville (~courville@233-53.206-83.static-ip.oleane.fr) has joined #beagle
  • [10:56:55] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [10:57:54] * khasim (~a0393720@192.163.20.231) has joined #beagle
  • [10:58:01] * courvill1 (~courville@archos.rain.fr) has joined #beagle
  • [10:58:06] * courvill1 (~courville@archos.rain.fr) Quit (Client Quit)
  • [10:59:21] * _roger_ (~a0740758@nat/ti/x-ratjacsazegusrei) has joined #beagle
  • [11:00:01] * courville (~courville@233-53.206-83.static-ip.oleane.fr) Quit (Ping timeout: 264 seconds)
  • [11:00:22] * courville (~courville@archos.rain.fr) has joined #beagle
  • [11:05:01] * nicobari (~cb6ef6e6@gateway/web/freenode/x-jqjhrgsgrnqwsuae) has joined #beagle
  • [11:05:20] * nicobari (~cb6ef6e6@gateway/web/freenode/x-jqjhrgsgrnqwsuae) Quit (Client Quit)
  • [11:06:44] * kanru (~kanru@61-228-163-60.dynamic.hinet.net) has joined #beagle
  • [11:09:37] * rsalveti_ (~rsalveti@189.115.168.181.dynamic.adsl.gvt.net.br) Quit (Remote host closed the connection)
  • [11:10:44] * _roger_ (~a0740758@nat/ti/x-ratjacsazegusrei) has left #beagle
  • [11:11:06] * _roger_ (~a0740758@nat/ti/x-iaxxrxaicrfvdkap) has joined #beagle
  • [11:13:31] * nlCortana_ (~johan@ip45-216-212-87.adsl2.static.versatel.nl) has joined #beagle
  • [11:16:10] * aholler_ is now known as aholler
  • [11:17:04] * jkridner (~a0321898@pdpc/supporter/active/jkridner) has joined #beagle
  • [11:17:15] * jkridner (~a0321898@pdpc/supporter/active/jkridner) Quit (Remote host closed the connection)
  • [11:17:18] * nlCortana_ (~johan@ip45-216-212-87.adsl2.static.versatel.nl) Quit (Client Quit)
  • [11:17:52] * nlCortana__ (~johan@ip45-216-212-87.adsl2.static.versatel.nl) has joined #beagle
  • [11:18:26] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Quit: ppotera)
  • [11:21:53] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) has joined #beagle
  • [11:22:22] * Phrog_ (~chatzilla@ip-87-82-198-210.easynet.co.uk) has joined #beagle
  • [11:26:10] * Phrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) Quit (Ping timeout: 264 seconds)
  • [11:26:19] * Phrog_ is now known as Phrog
  • [11:27:22] * hrw|gone is now known as hrw
  • [11:30:04] <hrw> ghoti: basically you need few AT commands to send and you are logged into gsm network. making gprs connection then is often few next AT commands
  • [11:31:11] <neure> does busybox execute any user script on login?
  • [11:34:14] * NotZed (~notzed@ppp118-210-6-88.lns20.adl2.internode.on.net) Quit (Quit: ircII EPIC4-2.10 -- Are we there yet?)
  • [11:35:26] * NotZed (~notzed@ppp118-210-6-88.lns20.adl2.internode.on.net) has joined #beagle
  • [11:40:53] * RazZziel (~raziel@udc-cesga.udc.es) has joined #beagle
  • [11:42:16] * filip (~filip@filip.math.uni.lodz.pl) Quit (Ping timeout: 252 seconds)
  • [11:45:52] * KosiNuss (~tom@p4FD1260A.dip0.t-ipconnect.de) has joined #beagle
  • [11:55:33] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) Quit (Remote host closed the connection)
  • [11:57:01] * andruk (~chatzilla@unaffiliated/andruk) Quit (*.net *.split)
  • [11:57:01] * mrc3 (~mrc3@nat/ti/x-wotdudgrqpfezjaj) Quit (*.net *.split)
  • [11:57:01] * brijesh (~brijesh@nat/ti/x-hqiqqjkeqcajjkzp) Quit (*.net *.split)
  • [11:57:01] * sakoman (~sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) Quit (*.net *.split)
  • [11:57:01] * signal11 (esteban@gnv.quaddro.net) Quit (*.net *.split)
  • [11:57:17] * LaptopBrain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) Quit (Ping timeout: 240 seconds)
  • [11:57:33] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) has joined #beagle
  • [11:58:02] * ogra (~ogra@ubuntu/member/ogra) Quit (Read error: Connection reset by peer)
  • [11:58:10] * ogra (~ogra@ubuntu/member/ogra) has joined #beagle
  • [12:00:30] * cwillu_at_work (~cwillu@cwillu.com) has joined #beagle
  • [12:00:30] * LaptopBrain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) has joined #beagle
  • [12:02:57] * gdm (~gdm@190.55.34.222) has joined #beagle
  • [12:03:51] * andruk (~chatzilla@unaffiliated/andruk) has joined #beagle
  • [12:03:51] * mrc3 (~mrc3@nat/ti/x-wotdudgrqpfezjaj) has joined #beagle
  • [12:03:51] * brijesh (~brijesh@nat/ti/x-hqiqqjkeqcajjkzp) has joined #beagle
  • [12:03:51] * sakoman (~sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) has joined #beagle
  • [12:03:51] * signal11 (esteban@gnv.quaddro.net) has joined #beagle
  • [12:09:47] * rcranetx (~rcranetx@nat/ti/x-giegfzplmnxpqmix) has joined #beagle
  • [12:12:46] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [12:14:37] * LaptopBrain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) Quit (Read error: Connection reset by peer)
  • [12:14:50] * LaptopBrain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) has joined #beagle
  • [12:17:38] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Client Quit)
  • [12:19:30] * rsalveti (~rsalveti@200.184.118.130) has joined #beagle
  • [12:22:17] * RazZziel (~raziel@udc-cesga.udc.es) Quit (Read error: Operation timed out)
  • [12:26:47] * nlCortana__ (~johan@ip45-216-212-87.adsl2.static.versatel.nl) Quit (Ping timeout: 260 seconds)
  • [12:33:56] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [12:42:15] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [12:43:00] <btr_26> <hrw> i am able to build phoneme-adavanced-personal successfully. where should i look for executables?
  • [12:43:02] * rsalveti (~rsalveti@200.184.118.130) Quit (Remote host closed the connection)
  • [12:43:55] <hrw> in package
  • [12:49:02] <btr_26> In angstrom-dev/deploy/glibc/ipkg i found phoneme-advanced-personal-dbg_mr2b135-r3.2.1_armv7a.ipk, phoneme-advanced-personal-dev_mr2b135-r3.2.1_armv7a.ipk & phoneme-advanced-personal_mr2b135-r3.2.1_armv7a.ipk
  • [12:49:12] <hrw> phoneme-advanced-personal_mr2b135-r3.2.1_armv7a.ipk
  • [12:49:27] * felipec (~felipec@esprx02x.nokia.com) has joined #beagle
  • [12:50:00] * rsalveti (~rsalveti@200.184.118.130) has joined #beagle
  • [12:51:16] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [12:51:28] * Meizirkki (~Meizirkki@80-186-222-219.elisa-mobile.fi) has joined #beagle
  • [12:51:37] <btr_26> <hrw> i have to install this ipk on beagleboard? and test it with any java program
  • [12:52:01] <hrw> btr_26: please read more about java ok? I only know how to build it
  • [12:52:32] <mru> do yourself a favour and read about java until you decide never to touch it
  • [12:53:04] <hrw> mru: nuf said
  • [12:53:13] <av500> damn, i touched it
  • [12:55:08] <mru> some make the mistake of not reading enough soon enough, and so start using java before they reach that decision
  • [12:55:26] <mru> eventually it will arrive, but by then they're stuck with a huge pile of code
  • [12:57:20] * GPSFan (~kenm@64.92.145.112) has joined #beagle
  • [12:58:33] * djlewis (~djlewis@75.15.64.20) has joined #beagle
  • [12:59:12] <dm8tbr> av500: you touch it you own it
  • [12:59:13] * jkridner (~a0321898@pdpc/supporter/active/jkridner) has joined #beagle
  • [12:59:39] <av500> Hi jkridner
  • [12:59:53] <jkridner> hi av500!
  • [13:00:10] * jkridner needs to figure out the time for that #gsoc meeting tomorrow...
  • [13:00:14] <jkridner> don't want to miss it!
  • [13:00:24] <btr_26> <hrw>anyway..thanx for your pointer
  • [13:01:17] <NotZed> 29 hours apparently
  • [13:10:41] * NishanthMenon (~nmenon@nat/ti/x-iabopibouqbrcpro) has joined #beagle
  • [13:11:26] * Laptop_Brain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) has joined #beagle
  • [13:11:52] * LaptopBrain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) Quit (Read error: Connection reset by peer)
  • [13:11:55] <s_edrik> Hi guys, when I run configure, it fails telling me that cpp fails the sanity check, when I look in config.log I find this error /usr/include/bits/local_lim.h:39:26: error: linux/limits.h: No such file or directory
  • [13:12:23] <s_edrik> I have checked and I have clib6-dev installed and that supplies limits.h, bur where do I find linux/limits.h
  • [13:12:25] * Laptop_Brain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) Quit (Read error: Connection reset by peer)
  • [13:12:26] <s_edrik> ?
  • [13:12:33] * nlCortana__ (~johan@ip45-216-212-87.adsl2.static.versatel.nl) has joined #beagle
  • [13:12:34] * Laptop_Brain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) has joined #beagle
  • [13:15:04] * Openfree (~df@58.33.76.151) has joined #beagle
  • [13:15:13] * Keyboard_Warrior (~holyduck@ip-24-139-106-77.eidsiva.net) has joined #beagle
  • [13:16:04] * Keyboard_Warrior (~holyduck@ip-24-139-106-77.eidsiva.net) Quit (Client Quit)
  • [13:20:42] * RazZziel (~raziel@udc-cesga.udc.es) has joined #beagle
  • [13:24:05] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Quit: jrmuizel)
  • [13:28:39] <aholler> s_edrik: linux-headers
  • [13:29:17] * hrw is now known as hrw|gone
  • [13:32:10] <s_edrik> aholler: I got a failed to instal from opkg :(
  • [13:32:15] <s_edrik> install
  • [13:33:32] <aholler> maybe the package has another name, search for kernel or linux
  • [13:35:55] <s_edrik> found one named linux-libc-headers-dev will try that one :)
  • [13:39:35] <s_edrik> hmm, it collides with some other packages.. will look more into too it, need to go now though :/
  • [13:39:38] <s_edrik> thanks aholler
  • [13:40:06] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [13:40:52] * KosiNuss (~tom@p4FD1260A.dip0.t-ipconnect.de) Quit (Remote host closed the connection)
  • [13:41:26] <jkridner> did you opkg update before trying to install linux-headers?
  • [13:43:50] <s_edrik> yeah
  • [13:44:24] <topfs2> jkridner, according to my calendar its 20
  • [13:46:01] <topfs2> sorry, 21
  • [13:46:11] <topfs2> I guess gmt+2
  • [13:56:48] * robtow (~rob@64.62.142.114) has joined #beagle
  • [13:59:08] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) has joined #beagle
  • [14:03:45] * BThompson (~a0193480@nat/ti/x-kfhgnbssaxmcfyro) has joined #beagle
  • [14:07:28] <jkridner> yeah, it is tomorrow... just need to check which time.
  • [14:09:49] * jrmuizel (~jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Quit: jrmuizel)
  • [14:10:05] <av500> ugt?
  • [14:11:39] <topfs2> according to http://socghop.appspot.com/document/show/gsoc_program/google/gsoc2010/faqs#timeline it seems to be TBD still
  • [14:11:54] * cmurillo (~cmurillo@186.32.57.22) has joined #beagle
  • [14:12:00] <topfs2> My icall I downloaded from gsoc says 21 something
  • [14:12:08] <topfs2> but I dobut that one is to be trusted :)
  • [14:13:26] * cmurillo (~cmurillo@186.32.57.22) Quit (Client Quit)
  • [14:13:35] * cmurillo (~cmurillo@186.32.57.22) has joined #beagle
  • [14:14:13] * jconnoll1|away is now known as jconnolly
  • [14:15:55] <ppotera_> g'morning all
  • [14:18:09] * emeb|mac (~ericb@ip72-223-81-194.ph.ph.cox.net) has joined #beagle
  • [14:20:07] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) Quit (Ping timeout: 252 seconds)
  • [14:21:27] * peksha (~peksha@145.86.broadband10.iol.cz) has joined #beagle
  • [14:23:17] * alancam (~a-campbel@nat/ti/x-agaehoqegidunwiy) has joined #beagle
  • [14:23:23] * 77CAAJSFD (~mrodrigue@186.32.57.22) has joined #beagle
  • [14:27:19] * khasim (~a0393720@192.163.20.231) Quit (Remote host closed the connection)
  • [14:27:30] * Zoxc (~zoxc@ti0128a340-dhcp0330.bb.online.no) has joined #beagle
  • [14:28:29] * khasim (~a0393720@192.163.20.231) has joined #beagle
  • [14:33:26] * tolbrino (~Adium@host213-123-170-251.in-addr.btopenworld.com) Quit (Ping timeout: 245 seconds)
  • [14:47:02] * ant_work (~andrea@host214-85-static.34-85-b.business.telecomitalia.it) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.3/20100401080539])
  • [14:49:31] * khasim (~a0393720@192.163.20.231) Quit (Quit: Leaving.)
  • [14:50:32] * safal_soni (~75c770c2@gateway/web/freenode/x-nkmgrvkzerspbvqe) has joined #beagle
  • [14:50:48] * midnight1111 (~80aae00b@gateway/web/freenode/x-btamtumwspgehkfm) has joined #beagle
  • [14:51:02] <midnight1111> Hello I have a quick newbie question... anyone home?
  • [14:51:13] <av500> no, at work
  • [14:51:48] <midnight1111> I built the openembedded images but I am not sure which image goes where on the SD card... can you help?
  • [14:51:54] <safal_soni> cmurillo:where can i have the ARM processor?
  • [14:52:01] * robtow (~rob@64.62.142.114) Quit (Ping timeout: 252 seconds)
  • [14:52:04] <av500> midnight1111: http://beagleboard.org
  • [14:52:29] <nlCortana__> midnight11111: did you create two partitions?
  • [14:52:31] * mru is at home _and_ at work
  • [14:52:45] <midnight1111> Yes I have gone through the website and openembedded website... the problem is I have several images but they need to map to images on the sd card..
  • [14:53:17] <midnight1111> Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.jffs2
  • [14:53:30] <nlCortana__> xloader uboot and the kernel goes to the first partition, rootfs to the second
  • [14:53:50] <midnight1111> I need to map the names of the images that I built to the names of the images on the SD card
  • [14:54:14] <midnight1111> Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.jffs2
  • [14:54:21] <nlCortana__> kernel is called uImage
  • [14:54:24] <midnight1111> Angstrom-base-image-glibc-ipk-2010.4-test-20100415-om-gta01.rootfs.tar
  • [14:54:32] <midnight1111> base-image-om-gta01.jffs2
  • [14:54:35] <nlCortana__> rootfs can be extracted to the SD
  • [14:54:47] <nlCortana__> afaik
  • [14:54:48] <midnight1111> modules-2.6.24-oe5+gitrfb42ce6724576fc173faf8abfb04aa2c36d213b7-r1-om-gta01.tgz
  • [14:55:00] <midnight1111> uImage-om-gta01-latest.bin
  • [14:55:02] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [14:55:12] <nlCortana__> rename it to just uImage
  • [14:55:27] <nlCortana__> but it's in the docs
  • [14:55:42] <nlCortana__> beagle board has fairly good documentation
  • [14:55:52] <nlCortana__> you are so lucky :)
  • [14:56:26] * KosiNuss (~tom@p4FD1260A.dip0.t-ipconnect.de) has joined #beagle
  • [14:56:32] <midnight1111> Okay I have gone through openembedded and beagleboard... but no "copy this <file> to this <file> on the sd card" that I can see... Yes beagle board is well documented
  • [14:56:56] <nlCortana__> i have read it in the beagleboard docs im sure
  • [14:57:36] <midnight1111> Huh okay I can look again. thx
  • [14:57:56] <nlCortana__> http://pixhawk.ethz.ch/tutorials/omap/copy_gumstix_overo_on_sd_card
  • [14:58:11] <nlCortana__> this is for a different board, but i think it will work for you
  • [14:58:35] <nlCortana__> you also know how to properly format the SD?
  • [14:59:23] * Entasis (~Jarred@ppp118-210-175-167.lns20.adl6.internode.on.net) Quit (Quit: Leaving)
  • [14:59:40] * jpirko (~jirka@nat/redhat/x-btdrchxuwurjryjx) Quit (Quit: Leaving)
  • [14:59:44] <midnight1111> Yes I have an sd card working now with the prebuilt images
  • [15:00:45] * emeb|mac (~ericb@ip72-223-81-194.ph.ph.cox.net) Quit (Ping timeout: 276 seconds)
  • [15:01:45] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) Quit (Quit: Lost terminal)
  • [15:03:42] <koen> ehm
  • [15:03:57] <koen> why are people trying to run kernels for brokenmoko machines on beagle?
  • [15:04:18] <av500> lulz?
  • [15:05:46] * ppotera__ (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [15:06:08] * ppotera__ (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Remote host closed the connection)
  • [15:06:14] * ppotera__ (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [15:06:26] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Read error: Connection reset by peer)
  • [15:06:26] * ppotera__ is now known as ppotera
  • [15:07:14] * alecrim (~alecrim@189.2.128.130) has joined #beagle
  • [15:08:01] * Eko_ (~eko@lawn-128-61-16-67.lawn.gatech.edu) has joined #beagle
  • [15:08:24] * alecrim (~alecrim@189.2.128.130) Quit (Remote host closed the connection)
  • [15:09:11] * alecrim (~alecrim@189.2.128.130) has joined #beagle
  • [15:10:44] * jayabharath (~a0866114@nat/ti/x-llkkamivldpqrgbg) has joined #beagle
  • [15:13:43] * DanaG (~dana@pcp057509pcs.wireless.calpoly.edu) has joined #beagle
  • [15:14:15] <jkridner> anyone here know Janu0204 ?
  • [15:14:36] <jkridner> the individual requested to be a BeagleBoard.org GSoC mentor.
  • [15:17:19] * emeb (~ericb@ip72-223-81-194.ph.ph.cox.net) has joined #beagle
  • [15:27:08] * nlCortana (~johan@87.212.216.45) Quit (Remote host closed the connection)
  • [15:28:52] * DanaG (~dana@pcp057509pcs.wireless.calpoly.edu) Quit (Ping timeout: 252 seconds)
  • [15:30:01] * mewyn (~mewyn@c-98-228-137-171.hsd1.il.comcast.net) Quit (Ping timeout: 258 seconds)
  • [15:30:44] * nlCortana__ (~johan@ip45-216-212-87.adsl2.static.versatel.nl) Quit (Ping timeout: 240 seconds)
  • [15:35:26] * btr_26 (~5b08a7df@gateway/web/freenode/x-rfkgwvvwiaafdwic) Quit (Quit: Page closed)
  • [15:35:39] * DanaG (~dana@pcp057509pcs.wireless.calpoly.edu) has joined #beagle
  • [15:36:40] * mewyn (~mewyn@c-98-228-137-171.hsd1.il.comcast.net) has joined #beagle
  • [15:41:20] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [15:41:25] * tolbrino (~Adium@host213-123-170-251.in-addr.btopenworld.com) has joined #beagle
  • [15:43:50] * BB_ (~86868949@gateway/web/freenode/x-orbmvqvhmhwyczcc) has joined #beagle
  • [15:45:08] * DanaG (~dana@pcp057509pcs.wireless.calpoly.edu) Quit (Read error: Operation timed out)
  • [15:47:25] * LaptopBrain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) has joined #beagle
  • [15:47:28] * Laptop_Brain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) Quit (Read error: Connection reset by peer)
  • [15:53:44] * _roger_ (~a0740758@nat/ti/x-iaxxrxaicrfvdkap) Quit (Quit: Leaving.)
  • [15:55:42] * soman (~somnath@stargate.starnet.fi) Quit (Ping timeout: 258 seconds)
  • [15:55:51] * Phrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) Quit (Ping timeout: 260 seconds)
  • [15:56:52] * BB_ (~86868949@gateway/web/freenode/x-orbmvqvhmhwyczcc) Quit (Ping timeout: 248 seconds)
  • [15:57:27] * BB_ (~86868949@gateway/web/freenode/x-uvoqgsuxqpkmehhg) has joined #beagle
  • [16:01:03] * bearsh (~quassel@adsl-245-48-fixip.datacomm.ch) Quit (Read error: Connection reset by peer)
  • [16:02:16] * bearsh (~quassel@adsl-245-48-fixip.datacomm.ch) has joined #beagle
  • [16:04:30] * Crofton (~balister@adsl-75-36-176-185.dsl.pltn13.sbcglobal.net) has joined #beagle
  • [16:07:26] * Eko_ (~eko@lawn-128-61-16-67.lawn.gatech.edu) Quit (Quit: This computer has gone to sleep)
  • [16:07:56] * robtow (~rob@12.156.66.34) has joined #beagle
  • [16:09:52] * Eko_ (~eko@lawn-128-61-16-67.lawn.gatech.edu) has joined #beagle
  • [16:12:26] * Eko_ (~eko@lawn-128-61-16-67.lawn.gatech.edu) Quit (Client Quit)
  • [16:12:40] * Phrog_ (~chatzilla@ip-87-82-198-210.easynet.co.uk) has joined #beagle
  • [16:13:08] * Phrog_ is now known as Phrog
  • [16:13:15] * likewise (~likewise@82-171-51-231.ip.telfort.nl) Quit (Quit: likewise)
  • [16:15:20] * robtow1 (~rob.tow@12.156.66.34) has joined #beagle
  • [16:15:50] * robtow1 (~rob.tow@12.156.66.34) Quit (Client Quit)
  • [16:20:14] * levi` is now known as levi
  • [16:20:40] * naeg (~naeg@194.208.239.170) has joined #beagle
  • [16:24:09] * neo01124 (~neo@122.163.112.247) has joined #beagle
  • [16:25:43] * StevenC (~steven.co@78-22-115-173.access.telenet.be) Quit (Ping timeout: 260 seconds)
  • [16:27:48] * safal_soni (~75c770c2@gateway/web/freenode/x-nkmgrvkzerspbvqe) Quit (Ping timeout: 248 seconds)
  • [16:27:56] * djlewis (~djlewis@75.15.64.20) Quit (Ping timeout: 240 seconds)
  • [16:28:17] * jayabharath (~a0866114@nat/ti/x-llkkamivldpqrgbg) Quit (Quit: Leaving.)
  • [16:28:26] * Openfree (~df@58.33.76.151) Quit (Remote host closed the connection)
  • [16:30:32] * StevenC (~steven.co@78-22-115-173.access.telenet.be) has joined #beagle
  • [16:39:20] * jayabharath (~a0866114@nat/ti/x-eikkfnsozrwpxhir) has joined #beagle
  • [16:39:43] * Phrog_ (~chatzilla@87.113.240.138) has joined #beagle
  • [16:40:59] * midnight1111 (~80aae00b@gateway/web/freenode/x-btamtumwspgehkfm) has left #beagle
  • [16:41:31] * Phrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) Quit (Ping timeout: 265 seconds)
  • [16:41:40] * Phrog_ is now known as Phrog
  • [16:44:21] * Belna_ (~Thomas@ppp-88-217-99-158.dynamic.mnet-online.de) has joined #beagle
  • [16:45:41] * awozniak (~awozniak@adsl-76-205-222-173.dsl.snlo01.sbcglobal.net) Quit (Quit: Leaving)
  • [16:46:01] * awozniak (~awozniak@76.205.222.173) has joined #beagle
  • [16:48:14] * StevenC (~steven.co@78-22-115-173.access.telenet.be) Quit (Ping timeout: 276 seconds)
  • [16:51:01] * khasim (~a0393720@192.163.20.231) has joined #beagle
  • [16:51:40] <BB_> Dumb Question: I am trying to find the files that are currently loaded on my SD card, how do i get to the path?
  • [16:54:09] * Laptop_Brain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) has joined #beagle
  • [16:54:58] <mru> koen: any more speculation on the memory corruption?
  • [16:55:05] * LaptopBrain (~brain@cpc2-mapp3-0-0-cust318.nott.cable.ntl.com) Quit (Read error: Connection reset by peer)
  • [16:57:52] * tatane (~5a2c85ec@gateway/web/freenode/x-pofhfpitsidjdcnt) has joined #beagle
  • [16:58:28] <tatane> hello
  • [16:59:06] * Phrog (~chatzilla@87.113.240.138) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.3/20100401080539])
  • [17:00:01] <tatane> I need somme help to force the mcspi driver in PIO mode and i wasn't able to find documentation on internet could someone give me advice ?
  • [17:00:44] * naeg (~naeg@194.208.239.170) Quit (Ping timeout: 240 seconds)
  • [17:02:02] <tatane> I have done the necessary patchin it is just the omap2_mcspi_device_config struct i need advice on
  • [17:03:06] <BB_> I new here and I trying to learn as I stumble my way through trail and error... can anyone tell me where I can learn more about "mmcblk0p1"?
  • [17:04:27] <neure> anyone used valgrind on arm?
  • [17:04:45] <mru> is it out yet?
  • [17:05:03] <neure> i have no idea
  • [17:05:19] <neure> ?ngstr?m doesnt seem to have such package, at least
  • [17:05:24] <neure> :/
  • [17:06:46] * tolbrino (~Adium@host213-123-170-251.in-addr.btopenworld.com) Quit (Quit: Leaving.)
  • [17:07:11] * prpplague (~danders@nat/ti/x-dhbkuiaxmodqofhg) has joined #beagle
  • [17:09:07] * GeneralAntilles (~ryan@Maemo/community/council/GeneralAntilles) has left #beagle
  • [17:09:21] * _chase_ (~chase@nat/ti/x-ahtygziwbtoyxvdm) has joined #beagle
  • [17:11:35] <mewyn> BB_: That device is the SD card reader. You interface with it just like any block device
  • [17:13:43] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
  • [17:14:25] * naeg (~naeg@194.208.239.170) has joined #beagle
  • [17:15:23] * courville (~courville@archos.rain.fr) Quit (Ping timeout: 248 seconds)
  • [17:15:35] * tolbrino (~Adium@host213-123-170-251.in-addr.btopenworld.com) has joined #beagle
  • [17:16:28] * theholyduck (~holyduck@ip-24-139-106-77.eidsiva.net) Quit (Read error: Connection reset by peer)
  • [17:16:56] * rcranetx (~rcranetx@nat/ti/x-giegfzplmnxpqmix) Quit (Quit: Leaving.)
  • [17:18:22] * andruk (~chatzilla@unaffiliated/andruk) Quit (Ping timeout: 264 seconds)
  • [17:24:32] * tatane (~5a2c85ec@gateway/web/freenode/x-pofhfpitsidjdcnt) Quit (Quit: Page closed)
  • [17:25:49] * khasim (~a0393720@192.163.20.231) Quit (Ping timeout: 264 seconds)
  • [17:26:28] * BB_ (~86868949@gateway/web/freenode/x-uvoqgsuxqpkmehhg) Quit (Ping timeout: 248 seconds)
  • [17:26:33] <sakoman> koen: did you see the response to my question re: linux-omap compatibility for the 06 SGX release?
  • [17:26:47] <sakoman> koen: http://e2e.ti.com/support/embedded/f/354/p/42105/147390.aspx#147390
  • [17:27:11] * ssvb (~ssvb___@a88-112-120-50.elisa-laajakaista.fi) has joined #beagle
  • [17:27:53] <sakoman> koen: I interpret the response to be "use the PSP kernel, you are on your own if you choose to use linux-omap kernel"
  • [17:34:01] * vyas021 (~dinesh@117.254.222.94) has joined #beagle
  • [17:34:45] * RazZziel (~raziel@udc-cesga.udc.es) Quit (Ping timeout: 276 seconds)
  • [17:42:18] * DanaG (~dana@pcp057413pcs.wireless.calpoly.edu) has joined #beagle
  • [17:42:34] * andruk (~chatzilla@unaffiliated/andruk) has joined #beagle
  • [17:48:22] * naeg (~naeg@194.208.239.170) Quit (Quit: WeeChat 0.3.1.1)
  • [17:57:13] * andruk (~chatzilla@unaffiliated/andruk) Quit (Ping timeout: 258 seconds)
  • [17:59:34] <koen> sakoman: that is sadly the one of the 2 blanket statements
  • [17:59:39] * andruk (~chatzilla@unaffiliated/andruk) has joined #beagle
  • [17:59:44] <koen> sakoman: the other is "you're not using the EVM"
  • [17:59:56] <sakoman> sigh
  • [18:00:00] <koen> sakoman: but we're looking at it internally to get it fixed
  • [18:00:28] <sakoman> great! that would be much appreciated
  • [18:00:38] * DanaG (~dana@pcp057413pcs.wireless.calpoly.edu) Quit (Read error: Operation timed out)
  • [18:00:58] <sakoman> I'll continue using the previous version for now
  • [18:01:36] <koen> sakoman: posting to e2e usually gets noticed by "the powers that be", which gives more weight to me pushing for it
  • [18:01:54] * koen is still equivalent to an intern for most things in TI
  • [18:02:27] <sakoman> koen: I understand how big companies work :-(
  • [18:02:59] <koen> sakoman: but the guy responsible for the bc_cat module is on holiday for the next 2 weeks
  • [18:03:02] <robtow> sakoman, koen - what's the issue you are discussing in reference to TI?
  • [18:03:13] <koen> not that that would matter since the next release is still a few months off
  • [18:03:39] <koen> robtow: kernel modules for the powervr only working on TI kernel, but not on mainline or tony kernels
  • [18:03:49] <koen> robtow: http://e2e.ti.com/support/embedded/f/354/p/42105/147390.aspx#147390
  • [18:03:51] <sakoman> robtow: http://e2e.ti.com/support/embedded/f/354/p/42105/147390.aspx#147390
  • [18:04:05] <sakoman> heh, koen is faster than me :-)
  • [18:04:15] <robtow> Ah.
  • [18:04:44] <koen> the bc_cat.c error is largely my doing, but the resource.h isn't
  • [18:05:32] <robtow> I must admit that I will soon have an interest in signal processing on the OMAP, and using hardware acceleration would be most advantageous.
  • [18:05:35] <koen> sakoman: I'll try to raise it during the gfx confcall tomorrow
  • [18:05:52] <sakoman> thanks, koen, I appreciate it
  • [18:07:35] <koen> sakoman: the memory corruption is rumoured to be due to us using 13MHz as mainclock instead of 26MHz
  • [18:07:59] <koen> sakoman: which comes back to "37xx clock tree is still a mess"
  • [18:08:20] <neure> hi
  • [18:08:36] <neure> can i set the cpu clock speed easily?
  • [18:08:44] <sakoman> koen: indeed -- I've suspected the clock code myself, just haven't had a chance to look into it
  • [18:09:02] <koen> neure: opkg install cpufrequtils ; cpufreq-set -f 500
  • [18:09:28] <neure> thanks!
  • [18:09:34] <neure> what about gpu frequency?
  • [18:09:52] <neure> what range of frequencies i can use?
  • [18:10:00] <koen> that should always run at max speed when used
  • [18:10:22] <neure> cant i set it to run at lower speeds?
  • [18:10:35] <neure> ive also read something about gpu running at half speeds
  • [18:10:46] * fisch_ (~Thomas@ppp-88-217-100-156.dynamic.mnet-online.de) has joined #beagle
  • [18:11:00] <koen> the current driver doesn't expose that
  • [18:11:07] <koen> you could devmem2 it, though
  • [18:11:22] <neure> any idea how to do that?
  • [18:12:48] <koen> it should be in the beagle mailinglist somewhere
  • [18:13:10] <neure> gnn
  • [18:13:21] <koen> google "devmem2 sgx"
  • [18:13:22] <neure> setting the frequency killed my display
  • [18:14:33] <neure> is the frequence setting stored across reboots?
  • [18:14:46] * Belna_ (~Thomas@ppp-88-217-99-158.dynamic.mnet-online.de) Quit (Ping timeout: 264 seconds)
  • [18:15:05] <neure> also, i did cpufreq-set -f 250 and the cpufreq-info tells me the frequency is 125 MHz
  • [18:15:26] <neure> cpufreq stats: 720 MHz:0.00%, 600 MHz:0.00%, 550 MHz:0.00%, 500 MHz:99.90%, 250 MHz:0.00%, 125 MHz:0.10% (1)
  • [18:15:29] <neure> what does that mean?
  • [18:17:33] <koen> that means it's running at 500MHz most of the time
  • [18:17:42] <koen> try 'cpufreq-set -g ondemand'
  • [18:17:43] <neure> most of the time?
  • [18:18:01] <koen> 99.90% according to your output
  • [18:18:07] <neure> what about my display?
  • [18:18:25] <neure> is it normal that i get black screen?
  • [18:18:33] <neure> and does this setting affect next boot as well?
  • [18:19:04] * andruk (~chatzilla@unaffiliated/andruk) Quit (Ping timeout: 258 seconds)
  • [18:22:50] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [18:23:35] * riccardo (~riccardo@net-93-146-192-161.t2.dsl.vodafone.it) has joined #beagle
  • [18:25:20] * andruk (~chatzilla@unaffiliated/andruk) has joined #beagle
  • [18:25:49] * dm8tbr waits for nz to claim the prize
  • [18:32:18] <jkridner> BeagleBoard already mentioned 3 times in the WindRiver Android presentation.
  • [18:33:38] <robtow> Does cpufrequtils work on the Gumstix as well?
  • [18:35:31] * andruk (~chatzilla@unaffiliated/andruk) Quit (Read error: Connection reset by peer)
  • [18:36:14] * DanaG (~dana@pcp057413pcs.wireless.calpoly.edu) has joined #beagle
  • [18:41:21] * vyas021 (~dinesh@117.254.222.94) Quit (Ping timeout: 245 seconds)
  • [18:43:50] * felipec (~felipec@esprx02x.nokia.com) Quit (Quit: Leaving)
  • [18:44:47] * jkridner (~a0321898@pdpc/supporter/active/jkridner) Quit (Quit: Leaving.)
  • [18:46:07] <ds2> hmmm
  • [18:56:05] <koen> mru: could you try a kernel with CONFIG_PM disabled and recheck memory corruption (you probably need to pass mpurate=800 to get it at >500MHz)
  • [18:59:47] * bob_wolff68 (~bob.wolff@c-67-169-87-179.hsd1.ca.comcast.net) has joined #beagle
  • [19:04:28] * peksha (~peksha@145.86.broadband10.iol.cz) Quit (Quit: Leaving.)
  • [19:04:49] <_av500_> dm8tbr: eh?
  • [19:05:22] * theholyduck (~holyduck@95.169.60.60) has joined #beagle
  • [19:08:27] * tolbrino (~Adium@host213-123-170-251.in-addr.btopenworld.com) Quit (Ping timeout: 265 seconds)
  • [19:14:55] <mru> koen: will try that
  • [19:16:35] <mru> what about the 26MHz clock?
  • [19:25:18] * Meizirkki (~Meizirkki@80-186-222-219.elisa-mobile.fi) Quit (Quit: Leaving)
  • [19:25:22] * neo01124 (~neo@122.163.112.247) Quit (Remote host closed the connection)
  • [19:30:54] * jayabharath (~a0866114@nat/ti/x-eikkfnsozrwpxhir) Quit (Quit: Leaving.)
  • [19:32:16] * RazZziel (~raziel@63.93.117.91.dynamic.mundo-r.com) has joined #beagle
  • [19:34:14] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Ping timeout: 240 seconds)
  • [19:35:14] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [19:35:35] <koen> mru: a patch to make it use that still doesn't exist
  • [19:36:32] <mru> is anyone working on one?
  • [19:37:21] <dm8tbr> _av500_: ?
  • [19:37:28] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [19:37:31] <koen> mru: the memory corruption seems to only manifest itself with the 512MB part, the 37xx evm doesn't show it because it's using the 256MB part (that's our theory)
  • [19:37:44] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [19:37:46] <dm8tbr> _av500_: ah, archosfans forum :)
  • [19:38:01] <koen> mru: we're working on getting a board with the symptons into the right hands at TI now
  • [19:38:13] * DanaG (~dana@pcp057413pcs.wireless.calpoly.edu) Quit (Read error: Operation timed out)
  • [19:38:21] <mru> ok, as long as someone is doing something...
  • [19:38:33] <mru> rebooting xm...
  • [19:40:58] <mru> still failing
  • [19:47:33] <koen> mru: yeah, my first boot was without failures, but that was pure luck, subsequent boots still showed problems
  • [19:49:23] <mru> this is weird... I turned PM back on, and now it's much more stable
  • [19:49:50] <mru> must have changed something else as well
  • [19:51:31] <mru> how do you test yours?
  • [19:53:50] <koen> unplug power, update kernel with card reader, reapply power, boot into GDM and log in
  • [19:54:01] <tsaaps> hey all, is kernel 2.6.33 out yet within openembedded? or still unstable?
  • [19:54:08] <koen> and watch serial console
  • [19:54:14] <mru> koen: and how do you detect if it's broken?
  • [19:54:37] <koen> mru: oopses on serial console, file corruption, etc
  • [19:54:44] <mru> that's worse than mine then
  • [19:55:00] <mru> I very rarely get an oops
  • [19:55:30] <mru> running the h264 test suite in ffmpeg seems reliable in triggering the errors
  • [19:55:34] <koen> tsaaps: not yet, and the sgx driver doesn't build against .33
  • [19:55:37] <mru> no oops, but bad output
  • [19:55:56] <tsaaps> ah ok, thanks
  • [19:59:22] * jkridner (~a0321898@pdpc/supporter/active/jkridner) has joined #beagle
  • [20:00:09] * rcranetx (~rcranetx@nat/ti/x-abvaiejavpesqkss) has joined #beagle
  • [20:20:24] * fisch_ (~Thomas@ppp-88-217-100-156.dynamic.mnet-online.de) Quit (Remote host closed the connection)
  • [20:21:52] * BB_ (~86868949@gateway/web/freenode/x-zdiaabvzljublvpu) has joined #beagle
  • [20:28:55] * DanaG (~dana@pcp057465pcs.wireless.calpoly.edu) has joined #beagle
  • [20:33:26] * mrc3 (~mrc3@nat/ti/x-wotdudgrqpfezjaj) Quit (Remote host closed the connection)
  • [20:33:54] * mrc3 (~mrc3@nat/ti/x-rhdfiotgsiheflsl) has joined #beagle
  • [20:38:03] * andruk (~chatzilla@unaffiliated/andruk) has joined #beagle
  • [20:43:55] * DanaG (~dana@pcp057465pcs.wireless.calpoly.edu) Quit (Ping timeout: 240 seconds)
  • [20:48:27] * neo01124 (~neo@122.163.112.247) has joined #beagle
  • [20:48:45] * tolbrino (~Adium@cpc2-walt14-2-0-cust112.know.cable.virginmedia.com) has joined #beagle
  • [20:49:22] * neo01124 (~neo@122.163.112.247) has left #beagle
  • [20:50:25] * paul_pwsan (~paul@pdpc/supporter/active/paul-pwsan) has joined #beagle
  • [20:50:31] <paul_pwsan> hello all
  • [20:50:44] <paul_pwsan> just wanted to drop in for a quick comment
  • [20:51:13] <paul_pwsan> looks like people are working on 36xx/37xx clock tree on some xm prototypes
  • [20:53:21] <paul_pwsan> in the event that there are any problems with the 36xx clock tree data that are found, patches of course would be welcomed on l-o mailing list
  • [20:55:25] <paul_pwsan> it might also be worth looping in vishwanath bs who originally contributed those patches: http://markmail.org/message/hpkc377xdc3xvq2e
  • [20:55:51] <paul_pwsan> good luck
  • [20:56:07] <mru> hi paul_pwsan
  • [20:56:07] * paul_pwsan (~paul@pdpc/supporter/active/paul-pwsan) has left #beagle
  • [20:56:10] <mru> damn
  • [20:56:42] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Quit: Client exiting)
  • [20:56:52] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [20:57:22] * KosiNuss (~tom@p4FD1260A.dip0.t-ipconnect.de) Quit (Remote host closed the connection)
  • [20:57:39] * paul_pwsan (~paul@pdpc/supporter/active/paul-pwsan) has joined #beagle
  • [20:57:45] <paul_pwsan> hi mru
  • [20:58:33] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [20:58:54] <mru> paul_pwsan: we're seeing some data corruption on the xm prototypes
  • [20:59:02] <mru> someone suggested clocks might be to blame
  • [20:59:24] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [21:00:44] <paul_pwsan> could be, i've heard some rumors that some devices have timings that don't seem to be correct. have asked for more info but it hasn't arrived yet
  • [21:01:57] <paul_pwsan> it might be worth enabling CONFIG_PM_DEBUG and CONFIG_DEBUG_FS and checking the clock tree debugfs files under /debug/clock (or wherever)
  • [21:01:58] <mru> one potential source of errors or at least confusion is x-loader and u-boot assuming ES1.0 means 3430 ES1
  • [21:02:04] <mru> and applying all manner of quirks
  • [21:02:26] <mru> I fixed one such case, but there are more
  • [21:03:00] <paul_pwsan> ouch, yes that could account for many problems
  • [21:04:49] <paul_pwsan> also, i don't know what RAM timings are in use, but they could easily be wrong if CORE (and thus the RAM) is run at 185MHz (3430 only supported 166MHz)
  • [21:05:27] <mru> the RAM chip is specced at 200MHz
  • [21:05:27] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Quit: L?mnar)
  • [21:05:28] * Tryum (~Tryum@e-corporation.info) Quit (Read error: Operation timed out)
  • [21:05:31] * Tryum (~Tryum@e-corporation.info) has joined #beagle
  • [21:05:57] <mru> the sdrc parameters set my x-loader match the ram datasheet
  • [21:06:10] <mru> I suspect it's not actually using a 200MHz clock though
  • [21:06:21] <mru> no idea what effect that might have
  • [21:08:08] <BB_> I am installing fortran but i am having issues getting through the configuration process. Has anyone done the installation/configuration?
  • [21:08:56] * Crofton (~balister@adsl-75-36-176-185.dsl.pltn13.sbcglobal.net) Quit (Read error: Connection reset by peer)
  • [21:09:20] * prpplague (~danders@nat/ti/x-dhbkuiaxmodqofhg) Quit (Remote host closed the connection)
  • [21:09:22] <BB_> when I do ../gcc/configure [option ...] [target..] i get an error indicating configure does nof found
  • [21:10:09] <paul_pwsan> mru, just sent you a crappy little utility, hacked up here to verify ram timing calculations, along with instructions
  • [21:10:41] <paul_pwsan> i guess the big question is what clock speed the RAM is running at
  • [21:11:23] <mru> gaaaah, this is madness
  • [21:11:30] <mru> u32 get_cpu_rev(void) {
  • [21:11:37] <mru> if (...) return CPU_3430_ES1;
  • [21:11:41] <paul_pwsan> that should be derivable from x-loader clock programming though
  • [21:11:42] <mru> else return CPU_3430_ES2;
  • [21:11:53] <mru> #define CPU_3430_ES1 1
  • [21:11:56] <mru> #define CPU_3430_ES2 1
  • [21:12:01] <ppotera_> that check for r0 of A8 is still there, eh?
  • [21:12:09] <mru> yep
  • [21:12:22] <mru> but both branches do the same thing
  • [21:12:22] <mru> ugh
  • [21:14:33] <mru> oh, no... it gets worse
  • [21:14:45] <mru> a different file defines those as 1 and 2
  • [21:16:41] <ppotera_> are you still dealing with ES1 and ES2? Or is it somehow affecting later revs?
  • [21:16:58] <mru> we have a new chip with ES1
  • [21:17:08] <ppotera_> ah
  • [21:17:12] <mru> and some code is confusing it with the old 34xx ES1
  • [21:17:29] <mru> think of this one as ES4
  • [21:17:57] <paul_pwsan> heh yep sounds familiar, we always need to do multiple rounds of feedback on the patches we get for the kernel's mach-omap2/id.c code. might be worth looking at mach-omap2/id.c:omap3_check_revision() in the kernel, btw
  • [21:18:02] <ppotera_> Ah, I thought that you have some custom chip with 34xx es1 in it
  • [21:18:02] * Crofton (~balister@adsl-75-36-176-185.dsl.pltn13.sbcglobal.net) has joined #beagle
  • [21:18:18] <paul_pwsan> and that existing mach-omap2/id.c _still_ needs massive cleanup...
  • [21:21:54] <Crofton> what happens when you plug the usb cable from a pc host to the ehci host on an overo
  • [21:22:01] <Crofton> harder to do on the beagle :)
  • [21:22:36] <ppotera_> direct host to host cable?
  • [21:22:45] <Crofton> a to mini b
  • [21:24:11] <ppotera_> nothing good :)
  • [21:24:48] <mru> which way do the power pins end up connected?
  • [21:28:02] * riccardo (~riccardo@net-93-146-192-161.t2.dsl.vodafone.it) Quit (Quit: leaving)
  • [21:28:36] * BB_ (~86868949@gateway/web/freenode/x-zdiaabvzljublvpu) Quit (Ping timeout: 248 seconds)
  • [21:28:51] * tolbrino (~Adium@cpc2-walt14-2-0-cust112.know.cable.virginmedia.com) Quit (Quit: Leaving.)
  • [21:29:59] * paul_pwsan (~paul@pdpc/supporter/active/paul-pwsan) has left #beagle
  • [21:30:10] * jconnolly is now known as jconnolly|away
  • [21:32:50] * tolbrino (~Adium@cpc2-walt14-2-0-cust112.know.cable.virginmedia.com) has joined #beagle
  • [21:33:58] <Crofton> sakoman, ping
  • [21:36:28] <koen> mru: xload is completely messed up for ES1?
  • [21:36:50] <Crofton> urg have any eeprom programming scripts?
  • [21:37:05] <Crofton> i need to set some board id's
  • [21:37:06] <mru> koen: I don't know how bad it is
  • [21:37:23] <mru> and it seems some of the code that _claims_ it checks the chip rev doesn't
  • [21:37:29] <mru> it only checks the A8 rev
  • [21:38:21] <koen> Crofton: http://www.sakoman.net/cgi-bin/gitweb.cgi?p=openembedded.git;a=commit;h=73f8e5656e061e480dbf8cc3bb3c25030c380538
  • [21:38:37] <Crofton> ah
  • [21:38:38] <Crofton> thanks
  • [21:43:46] * prpplague (~danders@nat/ti/x-udpwlcdjwokfuunc) has joined #beagle
  • [21:47:11] * DanaG (~dana@pcp057472pcs.wireless.calpoly.edu) has joined #beagle
  • [21:47:25] * zodttd (~me@user-0c90n1c.cable.mindspring.com) Quit (Ping timeout: 264 seconds)
  • [21:55:54] * Tryum is now known as Try`0xff
  • [22:01:09] * BB_ (~86868949@gateway/web/freenode/x-oynazhhlonunjyvx) has joined #beagle
  • [22:05:04] * DanaG (~dana@pcp057472pcs.wireless.calpoly.edu) Quit (Read error: Operation timed out)
  • [22:07:36] <Crofton> ok, made a note of that url this time :)
  • [22:08:24] <prpplague> Crofton: ??
  • [22:08:42] <Crofton> the one for sakoman's board id writing script
  • [22:09:19] <prpplague> Crofton: oh oh, give me as well
  • [22:09:30] <Crofton> http://www.sakoman.net/cgi-bin/gitweb.cgi?p=openembedded.git;a=commit;h=73f8e5656e061e480dbf8cc3bb3c25030c380538
  • [22:09:35] <Crofton> from koean
  • [22:09:36] * prpplague looks
  • [22:09:37] <Crofton> koen,
  • [22:09:40] <Crofton> I mena
  • [22:10:34] <emeb> hmmm - that'll be useful for me too. Thnx guys...
  • [22:15:42] <emeb> I guess you need to bitbake lmsensors to get the i2cset command, eh?
  • [22:17:09] <prpplague> Crofton: interesting
  • [22:17:30] <prpplague> Crofton: ive been just creating a file with the contects i need
  • [22:17:38] <prpplague> Crofton: then flashing that to the eeprom
  • [22:18:32] <emeb> prpplague: what do you do to flash?
  • [22:18:57] <prpplague> emeb: i am sorry, i did not understand the question
  • [22:19:29] <emeb> prpplague: you create a file with the contents you need & then flash into EEPROM. How do you flash into EEPROM?
  • [22:19:46] <emeb> (what commands do you use?)
  • [22:20:21] <prpplague> emeb: i2c tools has an eeprom read/write util
  • [22:20:28] <prpplague> emeb: basically like dd for eeproms
  • [22:20:58] <emeb> prpplague: OK - thanks. Have little experience w/ I2C on Linux - just getting feet wet on that now.
  • [22:21:23] <prpplague> emeb: download/build the i2ctools
  • [22:21:36] <prpplague> emeb: it has all the basic utils
  • [22:22:06] <emeb> prpplague: OK - will need to study that. Will be useful for several projects I'm working on now...
  • [22:22:59] * likewise (~likewise@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [22:26:45] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) has joined #beagle
  • [22:27:30] * tolbrino (~Adium@cpc2-walt14-2-0-cust112.know.cable.virginmedia.com) Quit (Quit: Leaving.)
  • [22:28:57] * BThompson (~a0193480@nat/ti/x-kfhgnbssaxmcfyro) Quit (Read error: Connection reset by peer)
  • [22:30:56] * kanru (~kanru@61-228-163-60.dynamic.hinet.net) Quit (Ping timeout: 245 seconds)
  • [22:32:35] * DanaG (~dana@pcp057472pcs.wireless.calpoly.edu) has joined #beagle
  • [22:33:04] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [22:33:27] * mrc3 (~mrc3@nat/ti/x-rhdfiotgsiheflsl) Quit (Remote host closed the connection)
  • [22:34:00] * mrc3 (~mrc3@nat/ti/x-egzjomnqrlzrhils) has joined #beagle
  • [22:40:15] * DanaG (~dana@pcp057472pcs.wireless.calpoly.edu) Quit (Ping timeout: 240 seconds)
  • [22:43:16] * rcranetx (~rcranetx@nat/ti/x-abvaiejavpesqkss) Quit (Quit: Leaving.)
  • [22:48:11] * NishanthMenon (~nmenon@nat/ti/x-iabopibouqbrcpro) Quit (Quit: Ex-Chat)
  • [22:48:24] * NishanthMenon (~nmenon@nat/ti/x-uyzzzvzauoirzkrr) has joined #beagle
  • [22:53:44] * niclas_ (~niclas@nat/ti/x-zycyhvcqhufozjth) has joined #beagle
  • [22:59:55] * BThompsonGR (~bernie@cpe-76-184-159-129.tx.res.rr.com) has joined #beagle
  • [23:01:36] * rsalveti (~rsalveti@200.184.118.130) Quit (Remote host closed the connection)
  • [23:01:41] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Remote host closed the connection)
  • [23:03:05] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [23:04:52] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) has joined #beagle
  • [23:06:02] * prpplague (~danders@nat/ti/x-udpwlcdjwokfuunc) Quit (Quit: Leaving)
  • [23:16:31] * 77CAAJSFD (~mrodrigue@186.32.57.22) Quit (Quit: Leaving.)
  • [23:17:36] * robtow (~rob@12.156.66.34) Quit (Ping timeout: 268 seconds)
  • [23:20:33] * RazZziel (~raziel@63.93.117.91.dynamic.mundo-r.com) Quit (Ping timeout: 276 seconds)
  • [23:22:06] * Openfree (~df@58.33.76.151) has joined #beagle
  • [23:23:03] * andruk (~chatzilla@unaffiliated/andruk) Quit (Ping timeout: 258 seconds)
  • [23:26:59] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
  • [23:43:12] * Cru_N_cher (~luls_lol@dslb-088-069-115-022.pools.arcor-ip.net) has joined #beagle
  • [23:46:28] * alancam (~a-campbel@nat/ti/x-agaehoqegidunwiy) Quit ()