• [00:03:41] * ThomasEgi (n=thomas@pppdyn-57.stud-ko.rz-online.net) Quit (Remote closed the connection)
  • [00:07:31] * Jiuy (i=t6kyha00@rhea.oamk.fi) Quit (wolfe.freenode.net irc.freenode.net)
  • [00:07:31] * kanth (n=chatzill@63.166.115.40) Quit (wolfe.freenode.net irc.freenode.net)
  • [00:07:31] * tzhau__ (n=tzhau@proxy0.sun.ac.za) Quit (wolfe.freenode.net irc.freenode.net)
  • [00:07:31] * methril|work (n=Methril@127.Red-80-38-102.staticIP.rima-tde.net) Quit (wolfe.freenode.net irc.freenode.net)
  • [00:09:58] * Jiuy (i=t6kyha00@rhea.oamk.fi) has joined #beagle
  • [00:14:52] <lemay> anyone have a favorite book for programming in linux that they would recommend?
  • [00:15:20] <mru> the ARM instruction set reference ;-)
  • [00:15:53] <lemay> that seems a little lower level than what I was aiming for :)
  • [00:16:28] <mru> I do read it a lot...
  • [00:16:48] <lemay> yea? Is it handy for coding your own assembly?
  • [00:16:58] <mru> you got it
  • [00:17:28] <lemay> are the compilers just not getting the job done?
  • [00:17:38] <mru> not always
  • [00:18:25] <lemay> I've been developing under windows for a while, and it seems like half of my learning curve is working under linux
  • [00:18:46] <lemay> the other half is the challenge of embedded/arm
  • [00:34:39] * pfoetche1 (n=pfoetche@dslb-088-067-175-050.pools.arcor-ip.net) Quit ("leaving")
  • [00:47:52] <ds2> hmmmm
  • [00:51:38] * magnet_ (n=magnet@AMontpellier-151-1-32-9.w92-143.abo.wanadoo.fr) Quit ("Lost terminal")
  • [00:53:07] * magnet (n=magnet@AMontpellier-151-1-32-9.w92-143.abo.wanadoo.fr) has joined #beagle
  • [00:54:47] * raster (n=raster@enlightenment/developer/raster) has joined #beagle
  • [00:55:24] * ghenriks (n=ghenriks@CPE000f6636c6a1-CM000f9fa6088e.cpe.net.cable.rogers.com) has joined #beagle
  • [00:56:01] * javaJake (n=javaJake@unaffiliated/javajake) Quit ("night")
  • [00:58:00] * jeremychang_ (n=jeremych@61.57.131.211) Quit ("??????")
  • [01:25:48] * robclark (n=robclark@ppp-70-129-137-250.dsl.rcsntx.swbell.net) Quit (Read error: 104 (Connection reset by peer))
  • [01:26:19] * robclark (n=robclark@nat/ti/x-nkjkotrmdwwekrjy) has joined #beagle
  • [01:43:38] * Openfree (n=Openfree@58.33.70.36) Quit (Remote closed the connection)
  • [01:55:11] * argentineBB (i=c9eba513@gateway/web/freenode/x-ncaiylxvkdzuqbqg) has joined #beagle
  • [02:11:09] * magnet (n=magnet@AMontpellier-151-1-32-9.w92-143.abo.wanadoo.fr) Quit (Read error: 60 (Operation timed out))
  • [02:14:57] * magnet (n=magnet@AMontpellier-151-1-8-64.w92-143.abo.wanadoo.fr) has joined #beagle
  • [02:16:04] * _gm_ (n=_gm_@190.173.79.152) Quit (Read error: 110 (Connection timed out))
  • [02:18:54] * _gm_ (n=_gm_@190.173.75.219) has joined #beagle
  • [02:19:42] * jevin (n=jevin@24-148-31-120.mcm-bsr1.chi-mcm.il.static.cable.rcn.com) has joined #beagle
  • [02:21:13] * docelic_ (n=docelic@78.134.199.152) Quit ("http://www.spinlocksolutions.com/")
  • [02:25:49] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [02:26:13] * jevin_ (n=jevin@24-148-31-120.mcm-bsr1.chi-mcm.il.static.cable.rcn.com) has joined #beagle
  • [02:32:27] * Leon_Nardella (n=Leon@200-161-14-111.dsl.telesp.net.br) has joined #beagle
  • [02:36:40] * lcuk (i=lcuk@cpc3-oldh7-0-0-cust590.manc.cable.ntl.com) Quit ("Leaving")
  • [02:41:53] * brolin (n=brolin@adsl190-28-154-31.epm.net.co) Quit (Client Quit)
  • [02:46:51] * Leon_Nardella (n=Leon@200-161-14-111.dsl.telesp.net.br) Quit ("Leaving.")
  • [02:51:18] * jeremychang (n=jeremych@xdn49o206.ee.ntu.edu.tw) has joined #beagle
  • [02:51:18] * jevin (n=jevin@24-148-31-120.mcm-bsr1.chi-mcm.il.static.cable.rcn.com) Quit (Read error: 110 (Connection timed out))
  • [03:04:11] * jkridner|work (n=a0321898@nat/ti/x-qcnrsfurddcomrua) Quit (Remote closed the connection)
  • [03:08:06] * cody__ (n=cody@dslb-084-056-124-064.pools.arcor-ip.net) has joined #beagle
  • [03:15:36] <ds2> @$%$@#$%@#@#$@#%@#$@#$@#$@@#%$@#$@#$
  • [03:20:36] * cody____ (n=cody@dslb-084-056-079-229.pools.arcor-ip.net) Quit (Read error: 110 (Connection timed out))
  • [03:52:25] * rkirti (n=oespirit@203.199.213.3) has joined #beagle
  • [03:54:57] * ubuntu (n=quassel@75.15.65.13) has joined #beagle
  • [03:58:09] * ubuntu (n=quassel@75.15.65.13) Quit (Client Quit)
  • [04:00:38] * _gm_ (n=_gm_@190.173.75.219) Quit (Read error: 110 (Connection timed out))
  • [04:03:13] * _gm_ (n=_gm_@190.173.73.30) has joined #beagle
  • [04:04:00] * jeremychang (n=jeremych@xdn49o206.ee.ntu.edu.tw) Quit ("??????")
  • [04:21:38] * jevin_ (n=jevin@24-148-31-120.mcm-bsr1.chi-mcm.il.static.cable.rcn.com) Quit ("Computer has gone to sleep")
  • [04:38:05] * wardred (n=wardred@75.142.253.144) has joined #beagle
  • [04:43:48] * katier (n=a0270521@192.94.94.1) Quit (Remote closed the connection)
  • [04:52:26] * robclark (n=robclark@nat/ti/x-nkjkotrmdwwekrjy) Quit ()
  • [05:15:43] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [05:19:43] * BThompson (n=Bernie_T@cpe-66-25-52-232.tx.res.rr.com) Quit (Read error: 54 (Connection reset by peer))
  • [05:21:42] * Animule (n=Animal@71-33-164-8.hlrn.qwest.net) has joined #beagle
  • [05:41:45] * Entasis (n=Jarred@ppp121-45-17-89.lns10.adl2.internode.on.net) has joined #beagle
  • [05:49:18] * Entasis (n=Jarred@ppp121-45-17-89.lns10.adl2.internode.on.net) Quit (Read error: 104 (Connection reset by peer))
  • [05:49:19] * Entasis_ (n=Jarred@ppp121-45-17-89.lns10.adl2.internode.on.net) has joined #beagle
  • [05:56:15] * wardred (n=wardred@75.142.253.144) Quit (Remote closed the connection)
  • [06:03:25] * Entasis_ (n=Jarred@ppp121-45-17-89.lns10.adl2.internode.on.net) Quit ("Leaving")
  • [06:03:27] * AlfredBB (i=c9eba513@gateway/web/freenode/x-fxevpohdajcctpwn) has joined #beagle
  • [06:04:29] <AlfredBB> Chattig from my newly configured BeagleBoard! this is awesome!
  • [06:10:01] <lemay> \o/
  • [06:11:22] <AlfredBB> Wifi+usb host OTG + s-video + Angstrom
  • [06:15:59] * AlfredBB (i=c9eba513@gateway/web/freenode/x-fxevpohdajcctpwn) Quit (Ping timeout: 180 seconds)
  • [06:21:33] <lemay> nice
  • [06:21:41] <lemay> I havent gotten my wifi to work yet
  • [06:21:59] <lemay> what wifi hardware are you using?
  • [06:22:19] <lemay> eh, he's gone
  • [06:24:50] * twatwaffle (n=Animal@71-33-162-232.hlrn.qwest.net) has joined #beagle
  • [06:34:07] * Animule (n=Animal@71-33-164-8.hlrn.qwest.net) Quit (Read error: 113 (No route to host))
  • [06:35:36] * ArteK (n=Artur@81.15.241.96) has joined #beagle
  • [07:04:47] * ElmiTheWizard (n=ElmiTheW@183.52-66-87.adsl-dyn.isp.belgacom.be) Quit (Read error: 110 (Connection timed out))
  • [07:27:57] * Openfree (n=Openfree@58.35.27.57) has joined #beagle
  • [07:29:31] * killring (n=killring@adsl-76-234-169-207.dsl.sfldmi.sbcglobal.net) Quit ()
  • [07:35:28] * Openfree (n=Openfree@58.35.27.57) Quit (Remote closed the connection)
  • [07:43:17] * shenki_ is now known as shenki
  • [07:53:04] * guillaum1 (n=gl@AMontsouris-153-1-17-227.w86-212.abo.wanadoo.fr) has joined #beagle
  • [07:58:17] * Openfree (n=Openfree@58.35.27.57) has joined #beagle
  • [08:25:40] * ArteK (n=Artur@81.15.241.96) has left #beagle
  • [08:28:24] * lcuk (i=lcuk@cpc3-oldh7-0-0-cust590.manc.cable.ntl.com) has joined #beagle
  • [08:34:46] * ArteK (n=Artur@81.15.241.96) has joined #beagle
  • [08:36:33] * FuL|OUT is now known as fulgas
  • [08:45:10] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) has joined #beagle
  • [08:48:28] * Openfree (n=Openfree@58.35.27.57) Quit (Read error: 110 (Connection timed out))
  • [08:53:15] * dual (n=dual@5.79-160-122.customer.lyse.net) has joined #beagle
  • [08:55:32] * chelli (n=chelli@p54B85733.dip.t-dialin.net) has joined #beagle
  • [09:01:36] * booxter (n=booxter@212.98.182.22) Quit ("Lost terminal")
  • [09:01:41] * rkirti is now known as rkirti|afk
  • [09:03:37] * twatwaffle (n=Animal@71-33-162-232.hlrn.qwest.net) Quit (Read error: 145 (Connection timed out))
  • [09:20:39] * ThomasEgi (n=thomas@pppdyn-2f.stud-ko.rz-online.net) has joined #beagle
  • [09:28:25] * mcgeagh (n=McGeagh@xbmc/staff/mcgeagh) has joined #beagle
  • [09:30:48] * Christos_N (n=chatzill@gw5.mycosmos.gr) has joined #beagle
  • [09:31:38] * Christos_N (n=chatzill@gw5.mycosmos.gr) has left #beagle
  • [09:46:10] * raster (n=raster@enlightenment/developer/raster) Quit ("Gettin' stinky!")
  • [09:46:34] * argentineBB (i=c9eba513@gateway/web/freenode/x-ncaiylxvkdzuqbqg) Quit (Ping timeout: 180 seconds)
  • [09:57:24] * raster (n=raster@enlightenment/developer/raster) has joined #beagle
  • [10:05:21] * Entasis (n=Jarred@ppp121-45-48-214.lns11.adl2.internode.on.net) has joined #beagle
  • [10:07:03] * myhrman (n=miranda@ywasurt.odn.sgsnet.se) has joined #beagle
  • [10:13:25] * shankar (n=shankar@122.172.20.52) has joined #beagle
  • [10:16:58] * Entasis_ (n=Jarred@ppp121-45-48-214.lns11.adl2.internode.on.net) has joined #beagle
  • [10:25:36] * MCTouch (n=MCTouch@5acb05ac.bb.sky.com) has joined #beagle
  • [10:31:18] * jkridner (n=jason@99.18.31.220) has joined #beagle
  • [10:34:00] * pfoetchen (n=pfoetche@dslb-188-098-001-221.pools.arcor-ip.net) has joined #beagle
  • [10:35:09] * Entasis (n=Jarred@ppp121-45-48-214.lns11.adl2.internode.on.net) Quit (Read error: 110 (Connection timed out))
  • [10:47:19] * jkridner_ (n=jason@99.21.39.236) Quit (Read error: 110 (Connection timed out))
  • [10:49:41] * myhrman (n=miranda@ywasurt.odn.sgsnet.se) Quit (Read error: 110 (Connection timed out))
  • [10:55:50] * ElmiTheWizard (n=ElmiTheW@155.48-66-87.adsl-dyn.isp.belgacom.be) has joined #beagle
  • [11:01:48] * rkirti|afk is now known as rkirti
  • [11:03:24] * __av500__ is now known as av500
  • [11:07:33] * Christos_N (n=Christos@ppp-94-66-23-74.home.otenet.gr) has joined #beagle
  • [11:07:59] * Christos_N (n=Christos@ppp-94-66-23-74.home.otenet.gr) has left #beagle
  • [11:20:54] * pfoetchen (n=pfoetche@dslb-188-098-001-221.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [11:25:25] * likewise_ (n=chatzill@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [11:28:05] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [11:28:27] * pfoetchen (n=pfoetche@dslb-188-099-087-034.pools.arcor-ip.net) has joined #beagle
  • [11:28:39] * pfoetchen (n=pfoetche@dslb-188-099-087-034.pools.arcor-ip.net) Quit (Client Quit)
  • [11:28:45] * pfoetchen (n=pfoetche@dslb-188-099-087-034.pools.arcor-ip.net) has joined #beagle
  • [11:33:16] * Openfree (n=Openfree@58.33.70.36) has joined #beagle
  • [11:42:44] * rkirti is now known as rkirti|afk
  • [11:45:57] * kanth (n=chatzill@63.166.115.40) has joined #beagle
  • [11:45:57] * tzhau__ (n=tzhau@proxy0.sun.ac.za) has joined #beagle
  • [11:45:57] * methril|work (n=Methril@127.Red-80-38-102.staticIP.rima-tde.net) has joined #beagle
  • [11:55:03] * magnet is now known as Guest36232
  • [12:07:52] * dirk2 (n=dirk@p5B041381.dip0.t-ipconnect.de) has joined #beagle
  • [12:07:57] * raster (n=raster@enlightenment/developer/raster) Quit ("Gettin' stinky!")
  • [12:11:52] <dirk2> people are complaining that most stuff on http://code.google.com/p/beagleboard/wiki/BeagleSourceCode is dead. Any idea how to fix this?
  • [12:12:15] <mru> delete it
  • [12:12:31] <av500> or update it
  • [12:13:15] <dirk2> Any links for update?
  • [12:13:46] <av500> the ones you found googling for the broken ones, no? :-)
  • [12:16:10] <dirk2> Hmm, somebody seems to have removed http://beagleboard.googlecode.com/files/ :(
  • [12:19:18] * kanth (n=chatzill@63.166.115.40) Quit (wolfe.freenode.net irc.freenode.net)
  • [12:19:18] * tzhau__ (n=tzhau@proxy0.sun.ac.za) Quit (wolfe.freenode.net irc.freenode.net)
  • [12:19:18] * methril|work (n=Methril@127.Red-80-38-102.staticIP.rima-tde.net) Quit (wolfe.freenode.net irc.freenode.net)
  • [12:40:57] * fulgas is now known as FuL|OUT
  • [12:42:12] <dirk2> Hmm, http://code.google.com/p/beagleboard/wiki/BeagleSourceCode should be better now. All dead links removed and linked to current http://code.google.com/p/beagleboard/wiki/BeagleboardRevCValidation
  • [12:45:12] <XorA|gone> dirk2: you might want to link to this for linux formatting http://www.xora.org.uk/2009/08/14/omap3-sd-booting/
  • [12:45:43] <XorA|gone> dirk2: an whole massive page of instructions as one simple script
  • [12:46:45] <av500> dirk2: maybe also delete the now mislleading comments at the bottom?
  • [12:47:16] <mru> no, keep them
  • [12:47:21] <mru> we'll look smarter that way
  • [12:47:34] <dirk2> XorA|gone: I prefer eLinux wiki as this has (a) a nicer wiki engine and (b) everybody can edit. So regarding your script, maybe you like to add a link or comment at http://elinux.org/BeagleBoardBeginners ?
  • [12:48:28] <dirk2> XorA|gone: comments: There doesn't seem to be the option to remove them? At least not for me? So mru: I can't remove them ;)
  • [12:49:34] <av500> the add one saying "disregard the above comment"
  • [12:50:08] <av500> then
  • [12:54:40] * myhrman (n=miranda@ywasurt.odn.sgsnet.se) has joined #beagle
  • [13:07:46] * Stan-Dave (i=461a47d7@gateway/web/freenode/x-vvpckgmxcjyrqunx) has joined #beagle
  • [13:09:40] <Stan-Dave> I have a question again. Is anyone else running the most recent Angstrom demo had any problems with cron?
  • [13:10:08] <Stan-Dave> I had a cron job running every 10 minutes which executed just fine for a day or two, but then suddenly just stopped.
  • [13:10:31] <Stan-Dave> Bouncing the cron daemon made it start working
  • [13:14:24] * FuL|OUT is now known as fulgas
  • [13:28:28] * etched (i=47aa334b@gateway/web/freenode/x-kfsyiwhwgiqbksao) Quit ("Page closed")
  • [13:28:29] * priddix (n=chatzill@94-171-140-97.cable.ubr10.dudl.blueyonder.co.uk) Quit (Remote closed the connection)
  • [13:30:34] * priddix_ (i=5eab8c61@gateway/web/freenode/x-gcejqcctjrvrlmdi) Quit (Ping timeout: 180 seconds)
  • [13:33:21] <Stan-Dave> interesting, it may have to do with when my clock briefly got reset to 01/01/1969 for some reason
  • [13:41:06] * bobkatzz (n=bobkatzz@c-67-166-164-187.hsd1.va.comcast.net) has joined #beagle
  • [13:41:23] <bobkatzz> gm druids
  • [13:41:57] <bobkatzz> koen: ping
  • [13:42:57] <bobkatzz> ah it's Sunday - almost off to the temple meself - will check back later
  • [13:44:24] * ssvb (n=ssvb___@a88-112-120-50.elisa-laajakaista.fi) Quit ("Leaving")
  • [13:49:05] <av500> bobkatzz: gm
  • [13:49:27] <koen> bobkatzz: pong
  • [13:58:12] <bobkatzz> hey koen
  • [13:58:21] <bobkatzz> lad time :)
  • [13:58:24] <bobkatzz> lag
  • [13:59:12] <bobkatzz> anyway - presented the BB/SoftRock 6.3 to the radio club and it was quite a sensation - lots of interest in the BB
  • [13:59:24] <av500> slides?
  • [13:59:47] <bobkatzz> show Fldgig running iwth the PSK20 on 20 meters in BPSK31
  • [14:01:56] <bobkatzz> av500: speaking of which - I tried to bring up a large pdf and the BB barfed - had to reboot and use a dry board and markers :(
  • [14:02:19] * Stan-Dave (i=461a47d7@gateway/web/freenode/x-vvpckgmxcjyrqunx) Quit (Ping timeout: 180 seconds)
  • [14:02:26] <av500> using what viewer?
  • [14:03:14] <bobkatzz> av500: not sure - I just clicked the file icon (which usually works)
  • [14:03:35] <av500> :-)
  • [14:03:49] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [14:04:05] <av500> koen: what would be the "just clicked the file icon (which usually works)" pdf viewer on BB?
  • [14:04:12] <av500> khasim: try the patch?
  • [14:04:15] <av500> tried?
  • [14:04:22] <bobkatzz> oh crap - forgot I told my wife I'd go to church with her - now I'm late - chatch y'all later (after I've been absolved of all my sins! :P )
  • [14:04:47] <bobkatzz> bbl
  • [14:04:51] <av500> church is not online?....
  • [14:05:01] <bobkatzz> hehe - might be
  • [14:05:14] <bobkatzz> for me = the same
  • [14:05:24] <bobkatzz> be good :)
  • [14:05:32] * bobkatzz (n=bobkatzz@c-67-166-164-187.hsd1.va.comcast.net) has left #beagle
  • [14:09:58] <koen> av500: epdfview or evince
  • [14:10:35] <av500> both most likely xpdf/poppler based..
  • [14:12:03] <koen> both are poppler based
  • [14:15:25] * Stan-Dave (i=461a47d7@gateway/web/freenode/x-zybipuyzrbugyaym) has joined #beagle
  • [14:15:48] <av500> you build poppler with fp support for cortex?
  • [14:15:49] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [14:19:35] <koen> av500: poppler has 2 backends: splash and cairo
  • [14:19:49] <koen> av500: splash is integerbased and cairo, is well, cairo based
  • [14:19:53] <av500> yes, but both do not render pdfs...
  • [14:20:31] <av500> poppler has some fixedp stuff (we used on davinci)
  • [14:20:55] <av500> which is not needed on cortex...
  • [14:21:16] <koen> def get_poppler_fpu_setting(bb, d):
  • [14:21:16] <koen> if bb.data.getVar('TARGET_FPU', d, 1) in [ 'soft' ]:
  • [14:21:16] <koen> return "--enable-fixedpoint"
  • [14:21:16] <koen> return ""
  • [14:21:44] <koen> so for beagle (which sets TARGET_FPU to hard) angstrom will build the flopo version
  • [14:21:51] <av500> nice
  • [14:22:07] <av500> I think we never benchmarked the fixed vs float on cortex
  • [14:25:12] <koen> http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=367efff872c112572bc4e54a2e3ef4cb4578fb14
  • [14:25:23] <koen> that's what happens when you're bored on christman
  • [14:25:32] <koen> s/man/mas/
  • [14:28:06] <av500> next time you are bored, find out if its really faster :-)
  • [14:28:50] <koen> according to the irex guys it's faster on pxa25x
  • [14:29:22] <koen> but they are using it in greyscale mode, so I don't know how it performs on colour stuff
  • [14:45:59] * ogra (n=ogra@ubuntu/member/ogra) Quit (Read error: 104 (Connection reset by peer))
  • [14:49:23] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
  • [14:54:16] * memento_mori (n=memento_@89.243.227.161) has joined #beagle
  • [14:55:35] * jipi (n=jipi@bb121-6-204-181.singnet.com.sg) has joined #beagle
  • [15:12:43] * jevin (n=jevin@24-148-31-120.mcm-bsr1.chi-mcm.il.static.cable.rcn.com) has joined #beagle
  • [15:12:45] * myhrman (n=miranda@ywasurt.odn.sgsnet.se) Quit ()
  • [15:14:25] * rkirti|afk is now known as rkirti
  • [15:15:13] * gregoiregentil (n=gregoire@adsl-71-135-127-167.dsl.pltn13.pacbell.net) has joined #beagle
  • [15:43:17] * jipi (n=jipi@bb121-6-204-181.singnet.com.sg) Quit (Remote closed the connection)
  • [15:43:43] * shankar (n=shankar@122.172.20.52) Quit ("Leaving")
  • [15:45:01] * BThompson (n=Bernie_T@66.25.52.232) has joined #beagle
  • [15:45:54] * Entasis_ (n=Jarred@ppp121-45-48-214.lns11.adl2.internode.on.net) Quit ("Leaving")
  • [15:47:37] * wardred (n=wardred@75.142.253.144) has joined #beagle
  • [15:52:35] * rsalveti (n=rsalveti@189.70.48.107) Quit (Remote closed the connection)
  • [15:54:33] * javaJake (n=javaJake@unaffiliated/javajake) has joined #beagle
  • [16:02:18] * killring (n=killring@76.234.137.5) has joined #beagle
  • [16:04:02] * rsalveti (n=rsalveti@189.70.48.107) has joined #beagle
  • [16:07:38] * kozak1 (n=subbu@122.166.48.72) has joined #beagle
  • [16:14:30] * wardred (n=wardred@75.142.253.144) Quit (Remote closed the connection)
  • [16:14:34] * robclark (n=robclark@nat/ti/x-kpgtslhvaxjsbyfq) has joined #beagle
  • [16:16:07] * jevin (n=jevin@24-148-31-120.mcm-bsr1.chi-mcm.il.static.cable.rcn.com) Quit ("Computer has gone to sleep")
  • [16:26:12] * jevin (n=jevin@24-148-31-122.mcm-bsr1.chi-mcm.il.static.cable.rcn.com) has joined #beagle
  • [16:29:58] * jevin (n=jevin@24-148-31-122.mcm-bsr1.chi-mcm.il.static.cable.rcn.com) Quit (Client Quit)
  • [16:43:13] * pfoetchen (n=pfoetche@dslb-188-099-087-034.pools.arcor-ip.net) Quit (Read error: 110 (Connection timed out))
  • [16:47:18] * ghenriks (n=ghenriks@CPE000f6636c6a1-CM000f9fa6088e.cpe.net.cable.rogers.com) Quit (Remote closed the connection)
  • [17:23:55] <av500> why do ppl answer emails writen by "Tar Gz"?
  • [17:24:50] <mru> isn't that a czech name?
  • [17:28:13] * Animule (n=Animal@71-33-162-232.hlrn.qwest.net) has joined #beagle
  • [17:28:15] <av500> I guess not: http://www.behindthename.com/php/search.php?terms=tar&nmd=n&gender=both&operator=or
  • [17:28:24] <av500> must be a ferengi
  • [17:31:42] * javaJake (n=javaJake@unaffiliated/javajake) Quit (Read error: 110 (Connection timed out))
  • [17:37:03] <koen> av500: maybe they want the person to stop sending every email 5 times
  • [17:37:30] <mru> what list is this happening on?
  • [17:37:43] <av500> l-o
  • [17:39:25] <av500> .id, not .cz
  • [17:39:27] <koen> looking at git.mansr.com reminds me that I should revive my avr32 boards
  • [17:40:13] <koen> ah, indonesia
  • [17:40:32] <av500> yes, but at least he admits his low IQ: http://www.forumsains.com/index.php?action=profile;u=266
  • [17:42:21] <koen> actually, that impossible
  • [17:42:32] <koen> since it's a quotient
  • [17:42:34] <koen> wait
  • [17:42:40] * koen needs more coffee
  • [17:44:06] <av500> looks like it start with "1"...
  • [17:45:13] <koen> so it's ceil(mental age / physical age)
  • [17:46:01] <mru> koen: what avr32 do you have?
  • [17:46:18] <koen> the stk1000 (32MB ram) and the ngw
  • [17:46:27] * javaJake (n=javaJake@unaffiliated/javajake) has joined #beagle
  • [17:46:34] * mru has stk1006
  • [17:46:47] <mru> 64MB ram
  • [17:51:21] <av500> mru: not enuf to buffer all BBB frames :-)
  • [17:51:38] <mru> heh, no...
  • [17:51:48] <mru> but then it only has a tiny lcd attached
  • [17:51:53] * jeremychang (n=jeremych@61.57.131.211) has joined #beagle
  • [17:52:57] <koen> and it's like 140MHz
  • [17:53:36] <av500> it could decode the missing BBB audio on the BB :-)
  • [17:55:45] * ThomasEgi (n=thomas@pppdyn-2f.stud-ko.rz-online.net) Quit (Remote closed the connection)
  • [17:56:19] * ThomasEgi (n=thomas@pppdyn-2f.stud-ko.rz-online.net) has joined #beagle
  • [18:26:46] * rkirti (n=oespirit@203.199.213.3) Quit (Remote closed the connection)
  • [18:26:59] * gregoiregentil (n=gregoire@adsl-71-135-127-167.dsl.pltn13.pacbell.net) has left #beagle
  • [18:28:16] * edufelipe23 (i=96a2df06@gateway/web/freenode/x-bhmdtouqcbmearzx) has joined #beagle
  • [18:28:30] * edufelipe_ (n=edufelip@notebook6.wireless.ufsc.br) has joined #beagle
  • [18:28:42] <edufelipe_> Hi there!
  • [18:28:54] * fulgas is now known as FuL|OUT
  • [18:29:00] <edufelipe_> Could someone help me figure out power supply info?
  • [18:29:45] <edufelipe_> The manual says: "A regulated 5V DC supply of at least 500mA is required"
  • [18:30:42] <edufelipe_> And I've bought a power supply that has a symbol containing 3 dashes under a bigger dash, does that mean it's DC?
  • [18:31:01] * edufelipe23 (i=96a2df06@gateway/web/freenode/x-bhmdtouqcbmearzx) Quit (Client Quit)
  • [18:31:28] * kozak1 (n=subbu@122.166.48.72) Quit ("Leaving.")
  • [18:44:58] <adj> edufelipe_: yes
  • [18:46:17] * pfoetchen (n=pfoetche@dslb-188-099-087-034.pools.arcor-ip.net) has joined #beagle
  • [18:46:33] <edufelipe_> Also, that power supply says 2.5A, but the manual recommends a maximum of 2A. Is it safe to plug it on?
  • [18:46:44] * jeremychang (n=jeremych@61.57.131.211) Quit (Remote closed the connection)
  • [18:46:58] <edufelipe_> I mean, I always thought that amperage was only an upper limit, not a requisite.
  • [18:48:09] <mru> the beagle board alone should be fine with 0.5A
  • [18:49:30] <edufelipe_> Yeah, but I don't have a 0.5A power supply right now. I only have a 2.5.
  • [18:49:38] <mru> 2.5 > 0.5
  • [18:49:45] <mru> you could power five beagles with that
  • [18:50:10] <edufelipe_> Yeah, but the manual says: " The maximum current should not exceed 2A. "
  • [18:50:33] <edufelipe_> That's the source of my doubt.
  • [18:53:49] <mru> the beagle is well within 2A
  • [18:53:58] * Zagrophyte (n=zagg@c-24-98-43-131.hsd1.ga.comcast.net) has joined #beagle
  • [18:58:41] <edufelipe_> Thanks!
  • [18:58:48] * edufelipe_ (n=edufelip@notebook6.wireless.ufsc.br) has left #beagle
  • [19:01:37] <Zagrophyte> Has anyone gotten mono working on the BB?
  • [19:02:14] * koen prefers stereo
  • [19:02:56] <Zagrophyte> ;)
  • [19:05:21] <Zagrophyte> I'm going to buy a beagleboard next week and am interested in what types of development environments exist. I know about Eclipse/Java/C, was wondering if it was worth it to pursue C# development on the device
  • [19:05:43] <ThomasEgi> hm. aint that quite a memory hog?
  • [19:05:57] <av500> no, it runs fine in 6GB...
  • [19:06:22] <ThomasEgi> ah .. kay .looks like i messed up 2 different things then..
  • [19:07:22] <ThomasEgi> Zagrophyte, why are you wondering? i mean. it sure should compile afaik. i mean i run ubuntu on it and that should include mono by default
  • [19:08:04] <Zagrophyte> ThomasEgi: I guess I'm not sure how restricted things are for OMAP vs for x86, want to make sure I don't have any pitfalls I'm not expecting
  • [19:09:32] <ThomasEgi> restriction would be that you have little memory to waste. and as far as i know c# is not very suited to keep it low.
  • [19:09:46] <ThomasEgi> but i might be wrong too. since i'm not doing c# stuff myself
  • [19:09:53] <Zagrophyte> So I'd want to stick to straight C?
  • [19:09:55] <lemay> is there a c# compiler that targets the bb?
  • [19:10:12] <av500> what is gain of e.g. c# vs c or c++?
  • [19:10:14] <av500> +the
  • [19:10:31] <ThomasEgi> with c# you gain a microsoft lawsuit for free
  • [19:10:43] <lemay> managed memory speeds development
  • [19:10:57] <lemay> by creating less bugs
  • [19:11:08] <lemay> but its a bit more abstracted
  • [19:11:33] * ThomasEgi sticks with python
  • [19:11:43] <ThomasEgi> might be a tad slow on heavy math.
  • [19:11:47] <koen> lemay: isn't the point of c# that you don't need a compiler for each platform?
  • [19:12:24] <av500> yes, compile once, deploy everywhere, now where did I hear that before :-)
  • [19:12:49] <lemay> I hadn't heard that, but that just might mean I wasn't listening
  • [19:12:55] <koen> my first patch that went upstream was for a c# program
  • [19:13:28] <koen> for dashboard, which morphed into beagle :)
  • [19:13:47] <koen> come to think of it, that was 5 years ago
  • [19:14:06] <lemay> so the c# compiler issue is not an issue?
  • [19:14:49] <koen> it's the vm or whatever it's called in mono speak that's the problem
  • [19:15:25] <koen> after 2 years I gave up on trying to explain that hardcoding a specific arm ABI is bad
  • [19:15:53] <koen> thankfully they now hardcoded eabi
  • [19:18:06] * rkirti (n=oespirit@203.199.213.3) has joined #beagle
  • [19:21:42] * DavidThings_ (n=chatzill@207.47.6.166.static.nextweb.net) has joined #beagle
  • [19:23:38] * BThompson1 (n=Bernie_T@cpe-66-25-52-232.tx.res.rr.com) has joined #beagle
  • [19:24:06] * BThompson (n=Bernie_T@66.25.52.232) Quit (Read error: 145 (Connection timed out))
  • [19:25:08] <Zagrophyte> My second question is how easy is it to access the GPIO on the expansion headers? I'm going to be making a robot (I'm currently working with Arduino, so it's a big jump, I expect to be learning a lot) with the beagleboard at the core. Should I just use serial->Arduino as the GPIO handler, or is it trivial to do I
  • [19:25:16] <Zagrophyte> I/O directly fromt he beagleboard
  • [19:25:52] <tomba> hmm I wonder, perhaps I should some day port my Mono continuation code to arm. that'd be a good excercise on arm assembly code also
  • [19:26:04] <Zagrophyte> I/O being sensors etc running at 5v
  • [19:26:50] <Zagrophyte> I'm guessing it would at least be more modular to leave the low level stuff to the arduino
  • [19:26:57] <ThomasEgi> http://blog.makezine.com/archive/2009/02/blinking_leds_with_the_beagle_board.html
  • [19:27:02] <ThomasEgi> Zagrophyte, might help
  • [19:27:06] <Zagrophyte> ah, thanks
  • [19:27:43] <Zagrophyte> 1.8v, d'oh! :)
  • [19:28:06] <ThomasEgi> jeah
  • [19:28:14] <ThomasEgi> dont even try 5V there
  • [19:28:47] * dirk2 (n=dirk@p5B041381.dip0.t-ipconnect.de) Quit ("Konversation terminated!")
  • [19:31:40] <Zagrophyte> Wow, looks quite involved, I suppose I'll use the AVR for now, until some wrapper libraries, etc, develop
  • [19:32:41] <Zagrophyte> was not expecting file system based :D
  • [19:37:26] <koen> tomba: thanks for squashing all those patches together!
  • [19:44:05] * robclark (n=robclark@nat/ti/x-kpgtslhvaxjsbyfq) Quit (Remote closed the connection)
  • [19:47:10] <Zagrophyte> http://www.tincantools.com/product.php?productid=16147&cat=0&page=1&featured ooh.
  • [19:48:41] <av500> ah, the zippy
  • [19:50:17] * dual (n=dual@5.79-160-122.customer.lyse.net) Quit (Remote closed the connection)
  • [19:52:39] <koen> the zippy works quite well
  • [19:53:12] * robclark (n=robclark@nat/ti/x-uzvupkghmsdvcpbj) has joined #beagle
  • [19:53:23] <koen> I love how my beagle now keeps time over reboot
  • [19:53:32] <koen> cold reboot, that is
  • [19:55:30] <ThomasEgi> you addded a battery?
  • [19:55:38] <Zagrophyte> koen: You've got a prototype?
  • [19:56:40] <koen> Zagrophyte: I have a prototype with only mmc and a 'final' version with everything
  • [19:57:01] <Zagrophyte> nice, any idea when it will be available to the masses?
  • [19:57:08] <XorA|gone> how many mmc slots do you guys need :-)
  • [19:57:09] * BThompson (n=Bernie_T@cpe-66-25-52-232.tx.res.rr.com) has joined #beagle
  • [19:57:14] <koen> you'd have to ask tincantools
  • [19:57:18] <koen> XorA|gone: always one more :)
  • [19:57:37] <XorA|gone> although it would be ten secs of wiring to add more
  • [19:59:35] <koen> XorA|gone: and 2 days of pinmuxing :)
  • [19:59:50] <XorA|gone> yeah that probably take longer than the soldering :-D
  • [20:04:23] * florian (n=fuchs@e179101062.adsl.alicedsl.de) has joined #beagle
  • [20:05:16] * jkridner|web (i=45962215@gateway/web/freenode/x-cmjiapdxppgisubd) has joined #beagle
  • [20:05:27] <jkridner|web> any interest in http://wiki.omap.com/index.php/ETechDays_Lightning_Talks ?
  • [20:05:49] <koen> another wiki, cute
  • [20:05:54] * FuL|OUT is now known as fulgas
  • [20:07:37] <jkridner|web> koen: it has been around for a while. wasn't sure if this was right for elinux.org.
  • [20:08:41] * edufelipe_ (n=edufelip@notebook6.wireless.ufsc.br) has joined #beagle
  • [20:08:53] <av500> jkridner|web: you need to add an entry there, nobody wants to be 1st....
  • [20:09:19] <koen> hmmm
  • [20:09:26] <koen> that's during feeding time
  • [20:09:29] * ArteK (n=Artur@81.15.241.96) has left #beagle
  • [20:09:34] * ArteK (n=Artur@81.15.241.96) has joined #beagle
  • [20:09:37] <koen> wait
  • [20:09:42] <koen> I screw up timezones again
  • [20:10:46] <edufelipe_> Folks, have any of you seen VLC working on beagleboard?
  • [20:10:48] * BThompson2 (n=Bernie_T@cpe-66-25-52-232.tx.res.rr.com) has joined #beagle
  • [20:10:52] <koen> and grammar as well
  • [20:11:05] * jkridner|web cannot remember my wiki.omap.com password, so I'll need to add one tomorrow.
  • [20:11:18] <edufelipe_> Like, reeealy working? Displaying video and audio on HDMI?
  • [20:11:21] <koen> edufelipe_: sure, it work, but quite slow, because it doesn't seem to be using the neon ffmpeg bits
  • [20:11:35] <koen> jkridner|web: you a-id doesn't work?
  • [20:11:56] <jkridner|web> i didn't use my a-id.
  • [20:11:56] <edufelipe_> There is no way of making it use the gstreamer backend?
  • [20:12:35] * BThompson1 (n=Bernie_T@cpe-66-25-52-232.tx.res.rr.com) Quit (Read error: 110 (Connection timed out))
  • [20:12:42] <av500> edufelipe_: patches welcome
  • [20:13:00] <edufelipe_> As I understand the gstreamer is hardware accelerated right?
  • [20:13:28] <koen> gstreamer can use the cpu, yes
  • [20:13:53] <av500> anythin' that runs glib...
  • [20:14:33] <edufelipe_> No the CPU, the DSP, isn't it?
  • [20:14:50] <koen> I meant what I said :)
  • [20:16:00] * AlfredoBB (i=c9eba513@gateway/web/freenode/x-oinalxvkixaleefx) has joined #beagle
  • [20:16:07] <jkridner|web> there are plug-ins for GStreamer that use the DSP.
  • [20:16:10] <edufelipe_> Funny. I read on the list that now gstreamer is able to use the dsp for video decoding
  • [20:16:18] <bisco_> neon is CPU, not DSP
  • [20:17:16] <edufelipe_> What is neon?
  • [20:17:28] <edufelipe_> The TMS320C64x+ dsp?
  • [20:17:44] <jkridner|web> http://gstreamer.ti.com has information about the plug-ins.
  • [20:18:08] <jkridner|web> NEON is different--it is part of the ARM Cortex-A8 that handles vector instructions.
  • [20:18:37] <jkridner|web> FFmpeg supports NEON instructions today.
  • [20:18:57] <jkridner|web> Hopefully C64x+ support will come.
  • [20:19:37] <bisco_> edufelipe, read here: http://en.wikipedia.org/wiki/ARM_architecture#Advanced_SIMD_.28NEON.29
  • [20:21:44] <edufelipe_> But what about this: http://groups.google.com/group/beagleboard/browse_thread/thread/0a88dccbb7acc06c# ?
  • [20:24:33] <edufelipe_> So, even using NEON VLC is still too slow to be usable?
  • [20:24:47] <koen> jkridner|web: Is neon mandatory on a8?
  • [20:24:49] <jkridner|web> it is possible to use the DSP in GStreamer. Some of the required binary bundles have moved and I suspect there might be some tiny issues in gathering up all the right bits now with bad pointers, but the bits are available.
  • [20:25:17] <edufelipe_> I kinda wanted to build a media center using Beagleboard, so I am soulsearching for solutions.
  • [20:25:32] <jkridner|web> koen: no, i believe it is possible to have an A8 without NEON. ldesnogu?
  • [20:25:50] <edufelipe_> I talked to the guy porting XBMC, but they don't have video playback yet.
  • [20:25:54] <ldesnogu> jkridner|web, no it's not possible
  • [20:26:01] <ldesnogu> A9 can be without NEON, but not the A8
  • [20:26:18] <jkridner|web> thanks ldesnogu.
  • [20:26:20] * BThompson (n=Bernie_T@cpe-66-25-52-232.tx.res.rr.com) Quit (Read error: 110 (Connection timed out))
  • [20:26:23] <ldesnogu> np :-)
  • [20:26:38] * koen assumed arm11x6 had mandatory vfp, but qualcomm proved me wrong
  • [20:27:30] <jkridner|web> the fact that it is optional on A9 makes it bad to assume it is always there on A8+, making coders lives more difficult.
  • [20:28:07] <edufelipe_> koen: Isn't you the one that posted the video on youtube about dsp decoding on bb?
  • [20:28:10] <koen> I suspect a9 dropped the neon requirement to avoid having to put 1 neon block per core
  • [20:28:12] <jkridner|web> well, i must run. edufelipe_: good luck. I know it is possible. might help to hang out a bit on #gst_ti to get some answers on how.
  • [20:28:24] <_av500_> jkridner|web: thatswhy we should all use java...
  • [20:28:34] <_av500_> :)
  • [20:28:38] <jkridner|web> :)
  • [20:28:45] <koen> _av500_: no, javascript!
  • [20:28:53] <_av500_> lua
  • [20:29:15] <edufelipe_> Lua is sooo awsome =D
  • [20:29:44] <edufelipe_> koen?
  • [20:29:56] <_av500_> just provide the right bindings
  • [20:29:59] <edufelipe_> Are you koenkool?
  • [20:30:12] <_av500_> way kool!
  • [20:31:07] <_av500_> edufelipe_: yes he is kool
  • [20:31:12] * _gm_ (n=_gm_@190.173.73.30) Quit (Remote closed the connection)
  • [20:31:34] <edufelipe_> hahahaha. No really. Well, koenkooi, did what I'm trying to do, he just never shared how...
  • [20:32:03] <koen> nonsense, all the instructions are on the interweb and on the beagle mailinglist
  • [20:32:06] <_av500_> hes secretive
  • [20:33:05] <edufelipe_> On the announcement email? The "Beagleboard demo image, now with 100% more DSP"?
  • [20:35:05] * jevin (n=jevin@24-148-31-122.mcm-bsr1.chi-mcm.il.static.cable.rcn.com) has joined #beagle
  • [20:35:08] <Zagrophyte> "BeagleBoard can be connected to a DVI monitor using HDMI female to DVI male cable. " is that correct? I'm only finding male-male online, female looks like the actual port
  • [20:35:54] <_av500_> bb has hdmi, for dvi whatever the monitor has...
  • [20:36:06] <_av500_> could be typo
  • [20:36:32] * jkridner|web (i=45962215@gateway/web/freenode/x-cmjiapdxppgisubd) Quit ("Page closed")
  • [20:36:40] <Zagrophyte> http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10231&cs_id=1023104&p_id=2405&seq=1&format=2 so this should work?
  • [20:37:10] <_av500_> cant grok that ul atm...
  • [20:37:14] <_av500_> url
  • [20:37:17] <Zagrophyte> k
  • [20:37:31] <jevin> bb has a female hdmi port
  • [20:37:38] * janneg (n=janne@tichy.grunau.be) Quit ("reboot")
  • [20:37:48] <Zagrophyte> jevin: Ah must be typo then
  • [20:37:50] <jevin> i used a male hdmi - male dvi for my dell monitor
  • [20:37:55] <jevin> and i suspect that is the norm
  • [20:38:04] <Zagrophyte> http://elinux.org/BeagleBoard#DVI
  • [20:38:19] <Zagrophyte> also should say DVI-D
  • [20:38:45] * xpg (n=pf@port234.ds1-gjp.adsl.cybercity.dk) has joined #beagle
  • [20:39:14] * janneg (n=janne@tichy.grunau.be) has joined #beagle
  • [20:44:30] <AlfredoBB> Hi all, yesterday I managed to make Wifi+S-Video+USB working all togheter, using the Debian 2.6.29 Kernel *but* with the Angstrom distribution
  • [20:45:41] <AlfredoBB> To answer a question, I used a zd1211b dongle. It works terrible but you have to plug it in and out many times until the firmware loads, it's weird, sometimes it works, sometimes not.
  • [20:49:39] <AlfredoBB> Works Ok. My girlfriend asked "It's turned on? why it's so cool?" : P
  • [20:50:12] <AlfredoBB> She was talking about the BeagleBoard off course.
  • [20:53:23] * _gm_ (n=_gm_@190.173.72.125) has joined #beagle
  • [20:53:32] * edufelipe_ (n=edufelip@notebook6.wireless.ufsc.br) Quit ()
  • [20:57:27] * _gm_ (n=_gm_@190.173.72.125) Quit (Client Quit)
  • [20:57:43] * MCTouch (n=MCTouch@5acb05ac.bb.sky.com) Quit ("Leaving...")
  • [20:57:44] * _gm_ (n=_gm_@190.173.72.125) has joined #beagle
  • [21:03:15] * chelli (n=chelli@debian/developer/tschmidt) Quit ("IRC is just multiplayer notepad")
  • [21:06:16] * guillaum1 (n=gl@AMontsouris-153-1-17-227.w86-212.abo.wanadoo.fr) Quit (Read error: 110 (Connection timed out))
  • [21:11:40] <ldesnogu> koen, Neon is indeed a large piece of silicon that isn't needed by all SoC vendors
  • [21:11:58] <ldesnogu> that might make your life harder in the future :-)
  • [21:14:53] <Crofton|work> heh, we need to come up with some code to check for NEON at run time
  • [21:16:52] * mcgeagh (n=McGeagh@xbmc/staff/mcgeagh) Quit ("Leaving")
  • [21:18:11] * bobkatzz (n=bobkatzz@c-67-166-164-187.hsd1.va.comcast.net) has joined #beagle
  • [21:18:37] <bobkatzz> koen: ping
  • [21:19:56] * bisco_ (i=5a9301eb@gateway/web/freenode/x-avnlkegojzlouujc) Quit ("Page closed")
  • [21:19:56] <bobkatzz> sakoman_: ping
  • [21:20:04] <ldesnogu> Crofton|work, there's a bit in one of the features register IIRC
  • [21:20:17] <sakoman_> bobkatzz: pong
  • [21:20:21] <ldesnogu> but I don't know if that register is avail in user space
  • [21:20:23] <bobkatzz> hey there
  • [21:20:52] <bobkatzz> that's dediction - hanging out in here on Sunday afternoon! :P
  • [21:20:59] <bobkatzz> dedication heh
  • [21:21:06] <sakoman_> :-)
  • [21:21:14] <bkero> All the cool people are on IRC on sunday.
  • [21:21:15] <Crofton|work> http://connect.garmin.com/activity/11317580
  • [21:21:20] <robclark> well, I suppose you could try to execute some NEON instruction, and handle the SIGBUS error ;-)
  • [21:21:25] <Crofton|work> not so excited about running around atm
  • [21:21:30] <Crofton|work> yeah
  • [21:21:39] <Crofton|work> I think that is the appraoch used on x86
  • [21:21:59] <robclark> (it is just a little bit ugly.. tho)
  • [21:21:59] <bobkatzz> sakoman_: finally gave my presentation for the "BeagleBrick" and it was very well received
  • [21:22:03] <ldesnogu> you can also read /proc/cpuinfo
  • [21:22:40] <bobkatzz> even though I didn't have the 6.3 transmitting I did show that it worked (via Fldigi in receive mode)
  • [21:22:52] <robclark> hmm, I have neon, but /proc/cpuinfo claims I only have vfp:
  • [21:22:53] <robclark> Features : swp half thumb fastmult vfp edsp
  • [21:23:21] <sakoman_> bobkatzz: glad to hear it! I suppose you sold a few beagles? :-)
  • [21:23:22] <bobkatzz> today I'm working with SDR-Shell and although koen got that running it relies on Jackd and dttsp
  • [21:24:45] <bobkatzz> yeah there was a big "whoa, Yeah wow"! when I wrote $149 on my white board
  • [21:25:14] <bobkatzz> so I'm sure that there will be some projects involving that when the Ham Radio Users Group fires up this fall
  • [21:26:22] <bobkatzz> first I'd like to get everything prettied up so I can just burn SD' cards for the guys so they don't have to go through OE/bitbake fun
  • [21:27:04] * ddompe (n=ddompe@ip221-27-10-190.ct.co.cr) has joined #beagle
  • [21:28:28] * rkirti is now known as rkirti|brb
  • [21:29:24] <bobkatzz> oh - BTW - speaking of recipes - - take one unit of each - (i.e. 1/4 cup) black peppercorns, fennel seed, coriander seed = grind coarse then add 4 sprigs of rosemary chopped fine and 3 bays leaves crushed - add to jar and store in freezer
  • [21:30:04] * Animule (n=Animal@71-33-162-232.hlrn.qwest.net) Quit (Read error: 60 (Operation timed out))
  • [21:30:49] <bobkatzz> when the time comes (whenever) take a nice porterhouse, flatiron steak or hanger staek and sprinkle with mixer - rub in - let "hang out" min 3 hrs with a bit of Pinot Noir or Merlot on it - then grill
  • [21:31:11] <bobkatzz> A-mazing!
  • [21:31:34] <bobkatzz> got it from an old "Saveur" - "the steak issue"
  • [21:31:50] <sakoman_> sounds great!
  • [21:31:53] <jevin> mmmmmmmmmmmmm
  • [21:32:00] <bobkatzz> been using it for about 2 years now - time to pass it on :D
  • [21:33:10] <bobkatzz> yeah - the combo of blk pepper, fennel and coriandder is really unusual - if you want to do a one-off batch try roasting them in a pan first - that makes it even more amazing
  • [21:33:39] <bobkatzz> next week - my Tandoori chicken rub recipe - stay tuned :P
  • [21:35:34] <jevin> cant wait :D
  • [21:35:57] <bobkatzz> so anyway - I've got SDR-shell running but since it needs jack-server and dttsp it wasn't actually picking up any signals so I'm working on that and now have opkg'd both of those
  • [21:36:02] * likewise_ (n=chatzill@82-171-51-231.ip.telfort.nl) Quit (Remote closed the connection)
  • [21:37:14] <bobkatzz> and now hacking the Debian version of the startup file to reference the proer directories etc. since they are different then in Edson Pereiera's directions
  • [21:37:36] <bobkatzz> proper
  • [21:39:12] <bobkatzz> the reason for that is that SDR-Shell is now got some code to allow it to program the Si570 chip on the 6.3 and once that's done I think I'll be able to transmit. ----- yeee haaa!
  • [21:39:45] <bobkatzz> through the USB ATtiny chip on the I2C board that is
  • [21:39:54] <bobkatzz> otherwise is Klugy
  • [21:41:21] * rkirti|brb is now known as rkirti
  • [21:43:19] <ThomasEgi> attiny with usb?? whut?
  • [21:43:39] <bobkatzz> sakoman - it would be nice to get the final piece of the package done as well and that is SDR-Core which ties in alot of the DSP stuff and will allow the creation of signal analysers, frequency generators and all kinds of test bench tools - maybe even an oscilloscope - all on the BB! It would be a real boon to hams!
  • [21:44:56] <jevin> it uses VUSB, formerly known as AVR-USB
  • [21:44:57] <bobkatzz> ThomasEgi: Google: Soft Rock 6.3 I2C USB and that'll keep you busy for a few days hehe
  • [21:44:58] <jevin> at least im guessing
  • [21:45:16] <bobkatzz> yeah - I think you're right jevin
  • [21:45:41] <jevin> its a software implementation of usb for most AVRs, the restriction being that it is only low-speed, must run at a few specific clock rates, and the interrupt load is pretty high
  • [21:46:28] <jevin> there is another software implementation by an igor, IIRC, that isnt as developed
  • [21:46:48] <bobkatzz> but at chip clock level speeds it's still pretty high and only has to trigger the Si570 which I believe is 10ns to switch frequencies
  • [21:47:21] <bobkatzz> so you can have virtually smooth tuning
  • [21:47:59] * zedstar (n=john@fsf/member/zedstar) Quit (Read error: 110 (Connection timed out))
  • [21:48:17] * rkirti (n=oespirit@203.199.213.3) Quit (Remote closed the connection)
  • [21:49:08] * edufelipe_ (n=edufelip@189.34.54.219) has joined #beagle
  • [21:49:12] <bobkatzz> I recently heard that even though. for instance, you may have the center frq set at like 7.050 (40 meters) the Si570 is so dynamic one guy dialed it all the way down to AM radio band and was picking up AM stations hehe - all without changing the BFO - which is a bit wierd
  • [21:49:47] <bobkatzz> so there was a lot of interest in just that chip at the presentation as well
  • [21:54:28] <bobkatzz> hmmm - well the script is now running at 70% rather than 40% - still got some directory issues with the location of dttsp
  • [21:55:41] <bobkatzz> wich is variously called dttsp, DttSP, DTTSP, and DTTsp - on a system that's case-sensitive - grrrr! :P
  • [21:58:25] * ArteK (n=Artur@81.15.241.96) has left #beagle
  • [22:00:53] <bobkatzz> sakoman_ bummer - my roma tomatoes, for some reason have gotten "late blight" - nasdaq!
  • [22:01:26] <bobkatzz> leaves turn brown and the tips of the fruit go kinda funky
  • [22:01:38] <bobkatzz> not on all of em - but a few
  • [22:02:29] <sakoman_> bobkatzz: I hear that is quite a problem this year in the eastern half of the country
  • [22:03:00] <ds2> why won't the @#$@%@$@#$# squash grow
  • [22:03:38] <bobkatzz> really? ds2? mine are all over the frikkin place!
  • [22:04:04] <ds2> bobkatzz: they are shorter then the largest dimension of a BB :(
  • [22:04:24] <bobkatzz> I have to keep picking them up off the grass and put em back in the garden or they be lookin up my neighbor's dress!
  • [22:04:54] <bobkatzz> what kind?
  • [22:04:56] <bobkatzz> I have butternut
  • [22:04:56] <ds2> wonder if i ought to get a yard of compost
  • [22:05:04] <ds2> butternut
  • [22:05:32] <bobkatzz> unfortunately I picke d abunch and THEN read online that you're supposed to leave them until the next frowt - dang!
  • [22:05:45] <ds2> oh heh
  • [22:05:45] <bobkatzz> frost
  • [22:05:57] <bobkatzz> but there's plenty more
  • [22:06:22] <bobkatzz> ok - gotta go sizzle some streak - bbl
  • [22:06:25] <ds2> yeah... all winter squashes are need that
  • [22:06:27] <bobkatzz> staek
  • [22:06:33] <ds2> okay late lunch, bbl too
  • [22:06:38] <bobkatzz> hmmmm - let's try steak
  • [22:08:19] * xpg (n=pf@port234.ds1-gjp.adsl.cybercity.dk) Quit ("Leaving")
  • [22:15:09] * robtmr (n=robtmr@S010600179a9bd155.vc.shawcable.net) has joined #beagle
  • [22:20:40] <lemay> anyone here running an ftp server on their BB?
  • [22:30:39] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit ("Sleep :|")
  • [22:30:40] * robtmr (n=robtmr@S010600179a9bd155.vc.shawcable.net) Quit (Read error: 131 (Connection reset by peer))
  • [22:30:42] * jevin (n=jevin@24-148-31-122.mcm-bsr1.chi-mcm.il.static.cable.rcn.com) Quit (Read error: 60 (Operation timed out))
  • [22:31:29] * robtmr (n=robtmr@S010600179a9bd155.vc.shawcable.net) has joined #beagle
  • [22:33:02] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) Quit ("Leaving")
  • [22:52:02] * Wiedi|Har (n=wiedi@newton-air.w.fruky.net) has joined #beagle
  • [22:53:18] * fulgas is now known as FuL|OUT
  • [22:53:27] <bkero> Hey guys. I want to run Solaris 10 on my Beagle Board. Can you help me?
  • [22:54:35] * robtmr (n=robtmr@S010600179a9bd155.vc.shawcable.net) Quit (Read error: 113 (No route to host))
  • [22:54:53] * AlfredoBB (i=c9eba513@gateway/web/freenode/x-oinalxvkixaleefx) Quit ("Page closed")
  • [22:56:11] * _gm__ (n=_gm_@190.173.72.125) has joined #beagle
  • [22:56:53] * _gm__ (n=_gm_@190.173.72.125) Quit (Read error: 131 (Connection reset by peer))
  • [23:14:09] * florian (n=fuchs@e179101062.adsl.alicedsl.de) Quit ("Verlassend")
  • [23:24:40] * ThomasEgi (n=thomas@pppdyn-2f.stud-ko.rz-online.net) Quit (Remote closed the connection)
  • [23:25:57] * Animule (n=Animal@71-33-165-23.hlrn.qwest.net) has joined #beagle
  • [23:48:38] * guillaum1 (n=gl@AMontsouris-153-1-22-194.w86-212.abo.wanadoo.fr) has joined #beagle
  • [23:58:08] <mru> bkero: linux not good enough?
  • [23:58:32] <bkero> mru: It's not enterprise enough.
  • [23:58:45] <mru> so it's not bad enough
  • [23:58:57] <bkero> Now you're starting to get the picture ;)
  • [23:59:43] * Wiedi|Har (n=wiedi@newton-air.w.fruky.net) Quit ("^C")