[00:03:28] <atin_> ddompe: I don't thin kthat fixed it ...
[00:03:52] <atin_> ddompe: I still hang on reset button - its unreliable.
[00:07:28] * trisooma (n=remko@82.95.240.160) Quit ("Enuff for today")
[00:10:32] * rsalveti_ (n=salveti@200.184.118.130) Quit (Remote closed the connection)
[00:24:26] * RogerMon1 (n=a0740758@nat/ti/x-a12515624d3c66c6) Quit (Remote closed the connection)
[00:24:32] * NCommander (n=mcasadev@ubuntu/member/ncommander) has joined #beagle
[00:29:15] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
[00:35:18] * bmxr_laptop (n=chatzill@142.232.131.156) Quit (Read error: 113 (No route to host))
[00:35:42] * __alanc__ (n=a-campbe@nat/ti/x-532ad84b35aaa714) Quit ()
[00:37:38] * zedstar (n=john@fsf/member/zedstar) Quit (Remote closed the connection)
[00:41:29] * brolin (n=brolin@190.157.13.75) has joined #beagle
[00:41:41] * rsalveti (n=salveti@189.70.71.70) has joined #beagle
[00:45:51] * BThompsonD (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) has joined #beagle
[00:53:04] * robclark (n=robclark@nat/ti/x-ae11d70485bb885a) Quit (Remote closed the connection)
[00:55:19] * ddompe (n=ddompe@190.10.11.214) Quit ()
[00:55:42] * Crofton (n=balister@12.152.49.66) has joined #beagle
[00:56:00] * NCommander (n=mcasadev@ubuntu/member/ncommander) Quit (Read error: 113 (No route to host))
[00:57:12] * alecrim (n=alecrim@189.2.128.130) Quit (Remote closed the connection)
[01:02:47] * macneib (n=macneib@70.29.47.216) Quit (Remote closed the connection)
[01:04:28] * atin_ (n=atin@c-71-232-7-71.hsd1.ma.comcast.net) Quit ()
[01:24:20] * Crofton (n=balister@12.152.49.66) Quit ("Leaving")
[01:24:42] * SpaceAceX (i=Rakso@CPE001310d5071d-CM0011ae01368a.cpe.net.cable.rogers.com) has joined #Beagle
[01:35:28] * GeneralAntilles (n=GeneralA@c-69-244-211-19.hsd1.fl.comcast.net) Quit ()
[01:44:05] * Septalicia is now known as Sept
[01:52:15] * GeneralAntilles (n=GeneralA@c-69-244-211-19.hsd1.fl.comcast.net) has joined #beagle
[01:53:05] * _don_ (n=don@nat/ti/x-f552233dd0cbaa2c) Quit ()
[02:01:26] * atin_ (n=atin@c-71-232-7-71.hsd1.ma.comcast.net) has joined #beagle
[02:11:49] * jkridner|work (n=a0321898@nat/ti/x-14e773c1347d5294) Quit ("Leaving.")
[02:13:05] * gregoiregentil (n=zonbu@adsl-71-135-115-184.dsl.pltn13.pacbell.net) has joined #beagle
[02:15:22] * atin_ (n=atin@c-71-232-7-71.hsd1.ma.comcast.net) Quit ()
[02:19:42] * nemequ (n=nemequ@ip68-111-215-155.sd.sd.cox.net) has joined #beagle
[02:21:18] * emeb (n=ericb@ip72-223-90-212.ph.ph.cox.net) has left #beagle
[02:21:23] * brolin (n=brolin@190.157.13.75) Quit (Client Quit)
[02:27:41] * Cru_N_cher (n=luls_lol@dslb-084-058-181-150.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
[02:28:46] * CruNcher (n=luls_lol@dslb-084-058-152-083.pools.arcor-ip.net) has joined #beagle
[02:30:44] * davidwang (i=41c7bd06@gateway/web/ajax/mibbit.com/x-3d723935bd4f400a) has joined #beagle
[02:31:10] * davidwang (i=41c7bd06@gateway/web/ajax/mibbit.com/x-3d723935bd4f400a) Quit (Client Quit)
[02:31:59] * davidwang (i=41c7bd06@gateway/web/ajax/mibbit.com/x-c70ec304b9193452) has joined #beagle
[02:37:38] * atin_ (n=atin@c-71-232-7-71.hsd1.ma.comcast.net) has joined #beagle
[02:40:50] <davidwang> hi
[02:41:15] <davidwang> Does anybody come from China?
[02:46:15] * robclark (n=robclark@166.128.175.26) has joined #beagle
[02:49:33] * __alanc__ (n=a-campbe@nat/ti/x-fca95cab08bcbfa9) has joined #beagle
[02:51:16] * davidwang (i=41c7bd06@gateway/web/ajax/mibbit.com/x-c70ec304b9193452) Quit ("http://www.mibbit.com ajax IRC Client")
[02:55:01] * Magnetophon (n=bart@a82-95-56-99.adsl.xs4all.nl) has joined #beagle
[02:55:05] * stimp (i=7d65b2b4@gateway/web/ajax/mibbit.com/x-35efefb5ded0efba) has joined #beagle
[02:56:16] * Magnetophon (n=bart@a82-95-56-99.adsl.xs4all.nl) has left #beagle
[03:00:47] * emeb_mac (n=ericb@ip72-223-90-212.ph.ph.cox.net) has joined #beagle
[03:01:07] * SpaceAceX (i=Rakso@CPE001310d5071d-CM0011ae01368a.cpe.net.cable.rogers.com) Quit ()
[03:10:27] * alecrim (n=alecrim@201008195062.user.veloxzone.com.br) has joined #beagle
[03:19:23] * robclark (n=robclark@166.128.175.26) Quit (Read error: 110 (Connection timed out))
[03:22:06] * GeneralAntilles (n=GeneralA@c-69-244-211-19.hsd1.fl.comcast.net) Quit (Remote closed the connection)
[03:22:20] * GeneralAntilles (n=GeneralA@c-69-244-211-19.hsd1.fl.comcast.net) has joined #beagle
[03:24:20] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
[03:28:34] <jkridner> anyone here able to test a u-boot build?
[03:33:25] * BThompsonD (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) Quit ("Trillian (http://www.ceruleanstudios.com")
[03:33:27] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
[03:33:40] * brianpspmod (n=zsirc@m490e36d0.tmodns.net) has joined #beagle
[03:33:55] <brianpspmod> ds2 whats up?
[03:36:14] * brianpspmod (n=zsirc@m490e36d0.tmodns.net) Quit (Client Quit)
[03:36:47] * brianpspmod (n=zsirc@m490e36d0.tmodns.net) has joined #beagle
[03:36:52] <brianpspmod> hey everyone
[03:56:11] * __alanc__ (n=a-campbe@nat/ti/x-fca95cab08bcbfa9) Quit (Remote closed the connection)
[04:00:31] * alecrim (n=alecrim@201008195062.user.veloxzone.com.br) Quit (Remote closed the connection)
[04:03:11] * brianpspmod (n=zsirc@m490e36d0.tmodns.net) Quit (Read error: 104 (Connection reset by peer))
[04:04:37] * DaQatz (n=db@c-66-30-48-54.hsd1.nh.comcast.net) Quit (Remote closed the connection)
[04:05:10] * DaQatz (n=db@c-66-30-48-54.hsd1.nh.comcast.net) has joined #beagle
[04:14:08] * NishanthMenon (n=nmenon@nat/ti/x-229e59d124f3a17f) Quit ("Ex-Chat")
[04:16:40] * atin_ (n=atin@c-71-232-7-71.hsd1.ma.comcast.net) has left #beagle
[04:24:49] * brolin (n=brolin@190.157.13.75) has joined #beagle
[04:24:59] * brolin (n=brolin@190.157.13.75) Quit (Client Quit)
[04:32:57] * jsync (n=jess@59.160.172.220) has joined #beagle
[04:37:06] * Eanmig (i=Eanmig@69.171.155.93) has joined #beagle
[04:44:01] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
[04:46:54] * kozak (n=subbu@117.192.17.156) Quit (Remote closed the connection)
[04:48:44] * gregoiregentil (n=zonbu@adsl-71-135-115-184.dsl.pltn13.pacbell.net) has left #beagle
[04:52:14] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
[04:52:36] * Wowbagger_ (n=wowbagge@d154-20-130-66.bchsia.telus.net) has joined #beagle
[05:08:39] * brianpspmod (n=zsirc@m490e36d0.tmodns.net) has joined #beagle
[05:09:52] <brianpspmod> hey
[05:09:55] <brianpspmod> ds2
[05:10:01] <brianpspmod> you here?
[05:10:35] * rohan (i=3b5cb8ae@gateway/web/ajax/mibbit.com/x-187ba300add190b7) has joined #beagle
[05:11:19] <rohan> Hi can anyone plese help me to interface a stepper motor with beagl board
[05:12:28] * mib_egmmso (i=50bf8a07@gateway/web/ajax/mibbit.com/x-8c324efc75deb61b) has joined #beagle
[05:12:42] <mib_egmmso> Hello there!
[05:15:20] * jbungo (i=d98c6e17@gateway/web/ajax/mibbit.com/x-9cbbdeba507c7aa0) has joined #beagle
[05:15:52] <jbungo> hello
[05:16:09] * khasim (n=a0393720@192.163.20.231) has joined #beagle
[05:16:42] * Crofton|bold (n=Crofton|@166.199.10.87) has joined #beagle
[05:17:19] * mib_egmmso (i=50bf8a07@gateway/web/ajax/mibbit.com/x-8c324efc75deb61b) Quit (Client Quit)
[05:18:16] <jbungo> I reflashed my SD card today with the latest Koen Angstrom demo, and now when I try to use omapfbplay to play Big Buck Bunny, I get mmap: invalid argument
[05:18:25] <jbungo> any ideas why?
[05:18:49] <Crofton|bold> I am still sitting in airplane waiting for de icing
[05:20:01] * gregoiregentil (n=zonbu@adsl-71-142-99-190.dsl.pltn13.pacbell.net) has joined #beagle
[05:20:05] * Viral_Sachde (n=Viral_Sa@59.97.2.11) has joined #beagle
[05:20:57] * jbungo (i=d98c6e17@gateway/web/ajax/mibbit.com/x-9cbbdeba507c7aa0) Quit ("http://www.mibbit.com ajax IRC Client")
[05:21:00] * Crofton|bold (n=Crofton|@166.199.10.87) Quit ("jmIrc destroyed by the OS")
[05:21:35] * BeagleNewbie (i=d98c6e17@gateway/web/ajax/mibbit.com/x-0018c09e76d07161) has joined #beagle
[05:22:52] <BeagleNewbie> When I try to play Big Buck Bunny_720p with omapfbplay in the latest Angstrom Koen demo, I get "mmap: invalid argument". Any idea why??
[05:24:37] <BeagleNewbie> is anyone here?
[05:25:25] <kulve> no
[05:28:07] <sakoman> Crofton|bold: what city now?
[05:29:01] <BeagleNewbie> When I try to play Big Buck Bunny_720p with omapfbplay in the latest Angstrom Koen demo, I get "mmap: invalid argument". Any idea why??
[05:29:37] <sakoman> if people know the answer they will reply
[05:32:59] <BeagleNewbie> of course it was working fine until I updated
[05:36:37] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
[05:36:47] <BeagleNewbie> maybe I need to redo setenv bootargs
[05:37:16] * rohan (i=3b5cb8ae@gateway/web/ajax/mibbit.com/x-187ba300add190b7) Quit ("http://www.mibbit.com ajax IRC Client")
[05:37:19] <raster> sakoman: yo yo
[05:42:57] <sakoman> raster: yo
[05:43:14] <raster> sakoman: i be needing to bring a certain overo to life
[05:44:20] <raster> i doth have myself an ftdi device..
[05:44:23] <sakoman> any issues?
[05:44:56] <sakoman> so no driver on your development machine?
[05:45:19] <raster> well...
[05:45:28] <raster> ttyUSB1... is dead jim
[05:45:29] <raster> dead
[05:45:38] <raster> i hear no signs of life on serial
[05:46:14] <raster> (ttyUSB1 is the serial device that pops up)
[05:46:30] <sakoman> does the green LED light up when you plug in the usb cable to the USB console port?
[05:46:30] <raster> ftdi etc. module is up and kicking
[05:46:31] * rohan (i=3b602052@gateway/web/ajax/mibbit.com/x-7fa194b991ee011a) has joined #beagle
[05:46:36] <raster> yup
[05:46:38] <raster> green for go
[05:46:44] <raster> but no life on serial
[05:46:57] <sakoman> are you using kerit?
[05:47:01] <sakoman> kermit
[05:47:02] <rohan> can we interface stepper with the board??
[05:47:05] <rohan> motor
[05:47:16] <raster> nup
[05:47:19] <raster> neocon actually
[05:47:29] <raster> just a small serial console app
[05:47:32] <raster> it doesnt dial etc.
[05:47:44] * rohan (i=3b602052@gateway/web/ajax/mibbit.com/x-7fa194b991ee011a) Quit (Client Quit)
[05:48:11] <raster> just opens the serial device in raw moide at a given baudrate
[05:48:34] <raster> and sets console up appropriately
[05:48:38] <raster> (on the client end)
[05:49:04] <ds2> checked the obvious like flow control is disabled?
[05:49:18] <sakoman> that was my next question :-)
[05:49:24] <sakoman> that and baud rate
[05:49:43] * bad (i=c0a314e7@gateway/web/ajax/mibbit.com/x-38f9349183b2f709) has joined #beagle
[05:49:58] <raster> default is 115200
[05:50:13] <raster> t.c_iflag &= ~(IXON | IXOFF);
[05:50:13] <raster> t.c_cflag |= CLOCAL;
[05:50:13] <raster> t.c_cflag &= ~CRTSCTS;
[05:50:36] <raster> i've been using this for my gta02's and beagleboard
[05:50:43] <sakoman> have you applied power? ;-)
[05:50:47] <raster> been using it for uboot
[05:50:49] <raster> yup
[05:50:52] <raster> power supply in
[05:51:04] <sakoman> you should get a green light on the overo motherboard too
[05:51:11] <ds2> checked dmesg to make sure it didn't come back and appear another /dev/ttyUSBn device?
[05:51:21] <raster> ooho
[05:51:26] <raster> anopther green light
[05:52:42] <Gareth> raster: howdy :)
[05:53:05] <raster> Gareth: yo
[05:53:15] <raster> ds2: i checked
[05:53:19] <raster> its ttyUSB1
[05:53:24] <raster> its what pops up when i plug it in
[05:53:28] <sakoman> you should see 2 green lights - one near the usb connector, the other on the motherboard
[05:53:29] <raster> i think its the other power issue...
[05:53:33] <raster> only 1 light...
[05:53:37] <raster> i think i may know now...
[05:54:55] <sakoman> the ftdi is powered by USB
[05:55:10] <sakoman> lets you yank power to the overo without losing your serial connection
[05:55:24] <raster> yeah
[05:55:25] <raster> i get that
[05:55:27] <raster> no mains
[05:56:40] <sakoman> did they send a universal wall wart?
[05:57:14] <raster> seems not
[05:57:17] <raster> 11-120v only
[05:57:21] <raster> and i may have blown it
[05:57:27] <raster> as i plugged it into 240
[05:57:42] <raster> as every other damn wart i have is universal
[05:57:49] <sakoman> grumble - you think they would know that by now!
[05:58:20] <raster> grrr
[05:58:24] <sakoman> Do you have any universal wall warts
[05:58:27] <raster> that would explain the... lifelessness
[05:58:36] <raster> well i have a large collection
[05:58:43] <raster> but none that are universal with the adaptors
[05:58:47] <raster> i can grab one from dickies
[05:58:49] <raster> no problems
[05:58:51] <sakoman> it needs 5V @ 1A
[05:58:54] <raster> yup
[05:58:59] <raster> thats simple enough these days
[05:58:59] <sakoman> center prong positive
[05:59:04] <sakoman> I will yell at them!
[05:59:18] <sakoman> no excuse for that kind of screwup
[05:59:20] * raster kicks himself for not reading the wart mini-label
[05:59:31] <raster> i dont mind us ac prongs
[05:59:46] <raster> i have enough of them so i have lots of us/jp style power boards and plugs
[06:00:05] <raster> but i just expect anything these days to come in a "handles 100-220v" land
[06:00:08] <sakoman> I have a bunch of them here, wish I could just hand one to you!
[06:00:11] <raster> its ok
[06:00:18] <raster> i can pick them up
[06:00:36] <raster> my bad for not reading thr tiny writing next to the power prongs
[06:00:51] <raster> unfortunately i dont have a compatible one here with the same plug
[06:00:55] <sakoman> heh, I think it isn't your fault!
[06:01:07] <raster> but.. in theory that serial port should have me a console and uboot - right?
[06:01:16] <raster> nah - i should read the fine print
[06:01:22] <raster> with these warts
[06:01:32] * BeagleNewbie (i=d98c6e17@gateway/web/ajax/mibbit.com/x-0018c09e76d07161) Quit ("http://www.mibbit.com ajax IRC Client")
[06:01:45] <raster> i just get so used to them being universal that i forget... unless they come with a huge sticker reminding me "100v only you fool!"
[06:01:46] <raster> :)
[06:02:23] <raster> i'll pick one up at dickies next
[06:02:42] <raster> i just needed the tidbit of info that.. i was missing a green led!
[06:02:46] <raster> thus no life
[06:02:47] <sakoman> Yeah, I know they carry universal supplies. I just don't understand why they bother carrying a 110 only
[06:02:55] <sakoman> :-(
[06:03:11] <raster> (one green led made me think "ok.. so... where's my life? it has power. thar be green ahoy!"
[06:03:12] <raster> :)
[06:03:24] <raster> 'tis ok
[06:03:29] <raster> i'll be back later with one in hand
[06:03:31] <sakoman> I still do that occasionaly :-)
[06:03:42] <sakoman> twice today even :-)
[06:03:43] <raster> i have enouhg 240->110v ac->ac convertors too
[06:03:55] <raster> i just need to be told when i need them
[06:03:57] <raster> :)
[06:04:01] <raster> like now
[06:04:02] <raster> :)
[06:04:13] <raster> god the wall behind my desk is wart-heaven
[06:04:21] <raster> wall warts galore!
[06:04:51] <raster> i have 10 usb ports full of goop
[06:05:00] <raster> just to connect/power stuff
[06:05:18] <raster> you get lazy after a while on it all and just wonder where wireless power has gone
[06:05:18] <raster> :)
[06:05:35] <raster> but cool- i know i need a migic green led on the motherobard
[06:05:47] <raster> bbl
[06:05:52] <raster> wart-hunting
[06:09:01] * brianpspmod (n=zsirc@m490e36d0.tmodns.net) Quit (Read error: 110 (Connection timed out))
[06:12:35] * bmxr_laptop (n=chatzill@d64-180-251-177.bchsia.telus.net) has joined #beagle
[06:15:27] * bad (i=c0a314e7@gateway/web/ajax/mibbit.com/x-38f9349183b2f709) Quit ("http://www.mibbit.com ajax IRC Client")
[06:26:41] * emeb_mac (n=ericb@ip72-223-90-212.ph.ph.cox.net) Quit ()
[06:27:35] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
[06:27:50] * khasim (n=a0393720@192.163.20.231) has joined #beagle
[06:31:12] * emeb_mac (n=ericb@ip72-223-90-212.ph.ph.cox.net) has joined #beagle
[06:36:59] * gregoiregentil (n=zonbu@adsl-71-142-99-190.dsl.pltn13.pacbell.net) Quit (Read error: 110 (Connection timed out))
[06:41:12] * emeb_mac (n=ericb@ip72-223-90-212.ph.ph.cox.net) Quit ()
[06:47:36] * gregoiregentil (n=zonbu@adsl-71-135-96-77.dsl.pltn13.pacbell.net) has joined #beagle
[06:49:42] * garren|work (n=chatzill@mail.dm.co.za) has joined #beagle
[06:52:29] <raster> aha!
[06:52:33] <raster> warts away
[06:52:42] <raster> we have 2 green led's
[06:53:10] <raster> but...
[06:53:15] <raster> garbage on serial
[06:55:06] <raster> so whats the serial setup for this baby
[06:55:13] <raster> 115200 8n1?
[06:57:26] <sakoman> yes
[06:58:17] <sakoman> no flow control
[06:58:44] <garren|work> morning all
[06:58:54] <raster> hmm ok
[06:58:54] <sakoman> gm!
[06:59:00] <raster> then i just get garbage for now
[06:59:06] <raster> when i press reset
[06:59:11] <raster> no uboot console or anything
[06:59:36] <raster> @D?????? @
[06:59:38] <raster> basically
[07:00:43] <sakoman> I get maybe a dozen charaters of trash, then the X-Loader banner
[07:00:52] <raster> no xloader
[07:00:54] <raster> thats the problem
[07:01:09] <raster> i am wondering if mine is emty/unflashed with anything?
[07:01:10] <sakoman> Did they ship it with a microSD card installed?
[07:01:16] <raster> nup
[07:01:36] <raster> microsd slot empty
[07:01:44] <raster> no microsd card with it
[07:01:55] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
[07:02:12] <ds2> does any of it look like 40T or 40D?
[07:02:26] <sakoman> they usually flash nand on the production units
[07:02:30] * Wowbagger_ (n=wowbagge@d154-20-130-66.bchsia.telus.net) Quit ("Leaving")
[07:02:40] <raster> ds2: nup
[07:02:45] <sakoman> but I think yours might be a proto, so I'm not sure what they did
[07:02:45] <raster> well i have a @D
[07:02:49] <raster> thats as close as it gets
[07:02:59] <raster> neither am i
[07:03:08] <sakoman> you don't see the 40T with the USB console
[07:03:11] <raster> thus why i'm asking as i have somethnig in a totally unknown state :)
[07:03:15] <raster> nupo
[07:03:22] <sakoman> I see:
[07:03:28] <sakoman> ???t???b???$U
[07:03:30] <sakoman> @ @ @QT,0@ @ @???
[07:03:34] <raster> ???t???b???$U
[07:03:34] <raster> @D?????? ???
[07:03:38] <raster> thats literally what i see
[07:03:58] <sakoman> So you might have empty nand
[07:04:02] <raster> yup
[07:04:05] <raster> most likely
[07:04:09] <raster> which... is... not good
[07:04:10] <sakoman> do you have a microSD card lying around?
[07:04:28] <raster> yup
[07:04:31] <raster> thats no problems
[07:04:36] <ds2> setup the USB download stuff with the code.google page utility?
[07:04:48] <ds2> or is sysboot on the overo setup to forbid that?
[07:05:08] <sakoman> ds2: microSD is the easiet
[07:05:12] <sakoman> easiest
[07:05:26] <ds2> if sysboot is configured for it...
[07:05:30] <sakoman> I rarely write nand now, just use microSD for development
[07:05:43] <sakoman> ds2: yes sysboot is configured for it
[07:06:32] <sakoman> raster: you can download images from: http://www.sakoman.com/feeds/omap3/glibc/images/
[07:06:33] <raster> http://www.gumstix.net/User/view/User-how-to-s/Booting-from-microSD/SD/MMC/110.html
[07:06:39] <raster> those handy files?
[07:06:55] <raster> or do i need more up to date ones to at least bootstrap myself?
[07:07:00] <raster> aha
[07:07:02] <raster> up to date doobies
[07:07:03] <raster> :)
[07:07:10] <sakoman> raster - no not that link!
[07:07:14] * rupeshgujare (n=rupesh@59.160.172.220) has joined #beagle
[07:07:30] <raster> wsame as beagle
[07:07:51] <sakoman> http://www.gumstix.net/Software/view/Software-Overo/Creating-a-bootable-microSD-card/111.html
[07:08:09] <raster> err same as beagle sd for boot?
[07:08:15] <sakoman> yeah, basically same as beagle
[07:08:25] <raster> yup
[07:08:26] <raster> the same
[07:08:28] <raster> just checking
[07:08:43] <sakoman> you can grab my pre-built images for everything
[07:08:50] <sakoman> made fresh daily
[07:09:18] <sakoman> pre-built images are 2.6.28
[07:11:35] <raster> cool
[07:11:46] <raster> tho i havew had mucho trouble with 2.6.28 wrt to usb
[07:12:12] <sakoman> musb?
[07:12:18] <raster> not sure
[07:12:23] <raster> 2.6.26 works fone for a usbhost
[07:12:33] <raster> but 2.6.28 seems to not want to talk to usbnet devices
[07:12:35] <raster> for example
[07:12:43] <raster> and even have problems with kbd/mouse i think
[07:13:01] * ogra (n=ogra@ubuntu/member/ogra) Quit (Read error: 60 (Operation timed out))
[07:13:01] <raster> either way i went back to 2.6.26 just so i have a working beagleboard
[07:13:03] <sakoman> I haven't had any reports of kb/mouse issues
[07:13:37] <sakoman> use the usb port labeled USB OTG
[07:13:47] <raster> havent tired on voero yet
[07:13:49] <raster> this was bb
[07:14:32] <sakoman> if they removed r26 from the overo motherboard then ehci port should also work (the one labed USB HOST)
[07:15:36] <ds2> does the EHCI on the Overo use the same pins as the RevC
[07:16:01] <sakoman> no, revC uses the same pins as Overo ;-)
[07:17:40] <gregoiregentil> Ping Tomba?
[07:19:56] <ds2> ah
[07:21:48] <sakoman> ds2: Overo used those from the beginning, sort of backed into it by the set of pin functions required
[07:22:07] <sakoman> by luck as it turns out
[07:22:18] <tomba> gregoiregentil: pong
[07:23:51] <gregoiregentil> Toni, I have worked a little bit during the past week-end on a rotation patch. But it's for the old DSS
[07:24:19] <gregoiregentil> I found a very old patch that I improved a little bit. I got a reliable rotation for plane 0 but I can't really make it work for plane 1
[07:24:42] <gregoiregentil> I'm cloning your git now. Did you have some success to rotate plane 1?
[07:25:27] <tomba> gregoiregentil: I haven't tested. I know that rotating yuv modes does not work, but I don't see why rgb565 or 888 rotation wouldn't work
[07:25:52] <tomba> there shouldn't be anything different with the planes when rotating rgb modes
[07:28:36] * methril|away is now known as methril
[07:28:43] <gregoiregentil> did you read section 1.5.3.4.4 of sprufa4a.pdf?
[07:28:50] * nemequ (n=nemequ@ip68-111-215-155.sd.sd.cox.net) Quit (Connection timed out)
[07:29:16] * nemequ (n=nemequ@ip68-111-215-155.sd.sd.cox.net) has joined #beagle
[07:29:24] <tomba> most likely =) but I don't have it here, what is it about?
[07:29:40] <ds2> is there any reason that DSS2 would not work on the OMAP2?
[07:30:37] <gregoiregentil> tomba: http://pastebin.com/d799a6a5a
[07:30:51] <tomba> ds2: only the lack of testing. there can be some minor bugs. but it did work with N810 just a while ago
[07:31:37] <methril> morning
[07:32:37] <tomba> gregoiregentil: yes, I know that. That's why I said yuv rotation doesn't work, I haven't implemented setting those bits. shouldn't be a biggie, just never had time
[07:35:32] <koen> good morning all
[07:35:34] * koen___ (n=koen@94.157.142.102) Quit ("Get Colloquy for iPhone! http://mobile.colloquy.info/")
[07:36:14] <sakoman> good morning koen
[07:36:31] <sakoman> tomba: switch to your most recent patch set now
[07:36:52] <sakoman> dvi seems to work fine, adding the lcd stuff now
[07:37:39] * bmxr_laptop (n=chatzill@d64-180-251-177.bchsia.telus.net) Quit (Read error: 110 (Connection timed out))
[07:41:02] * ScriptRipper (n=martin@85.233.34.53.dynamic.cablesurf.de) has joined #beagle
[07:43:44] <garren|work> morning koen
[07:53:31] * ceyusa (n=ceyusa@cm216016.red83-165.mundo-r.com) has joined #beagle
[07:53:42] <sakoman> raster: heading off to sleep now. good luck with the Overo!
[07:54:57] <sakoman> there's no user button - just press reset after inserting the microSD and you should be in business
[07:55:46] <raster> yupo
[07:55:47] <raster> sorry
[07:55:52] <raster> gf came home
[07:55:59] <raster> monopolised me with complaining
[07:56:11] <sakoman> talk to you tomorrow :-)
[07:56:26] <sakoman> good night all
[07:56:45] * koen is good at complaining
[07:56:57] <koen> too bad you can't easily make a job out of that
[07:58:48] * shri (i=3d5fc3cd@gateway/web/ajax/mibbit.com/x-b0eb2d014f754f61) has joined #beagle
[07:59:30] <ds2> tomba: cool... the N800 can continue to live in Mer even after it is abandoned
[08:00:20] * recalcati (i=51485a4f@gateway/web/ajax/mibbit.com/x-40d5a60272bd5993) has joined #beagle
[08:00:32] * mckoan|away is now known as mckoan
[08:04:07] * magnet_ (n=magnet@AMontpellier-259-1-80-86.w92-133.abo.wanadoo.fr) Quit (Read error: 110 (Connection timed out))
[08:14:18] <raster> koen: i'll start billing her for my time like i do clients
[08:14:19] <raster> :)
[08:14:44] * _AV500_ (n=AV500@sac91-1-82-232-88-182.fbx.proxad.net) has joined #beagle
[08:18:09] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
[08:18:23] <koen> raster: how's the evas NEON stuff coming along?
[08:18:57] <raster> koen: havent had time since lca
[08:19:12] <raster> i need to get back onto it
[08:19:17] <raster> but i fly off to korea on friday
[08:19:30] <raster> i've been putting some time into elementary and e17 itself
[08:19:53] <raster> also i've been wrestling with the never-ending breakage of oe-dev or openmoko
[08:19:54] <raster> or both
[08:21:51] <raster> sakoman: no love
[08:21:52] <raster> grrr
[08:21:59] * NCommander (n=mcasadev@ubuntu/member/ncommander) has joined #beagle
[08:23:18] <raster> oooh wait
[08:23:32] <raster> mlo misnamed
[08:24:22] <raster> nup
[08:24:24] <raster> still no love
[08:25:13] <koen> MLO needs to be the first file on the partition
[08:25:24] <raster> hmmm
[08:25:33] <koen> how big is your card?
[08:25:41] <raster> 512m
[08:25:45] <raster> 32m fat partition
[08:25:59] <raster> i swear it was first
[08:26:00] * Sept (n=bakljg@c-98-240-226-129.hsd1.mn.comcast.net) Quit (Read error: 110 (Connection timed out))
[08:26:05] <raster> tho i renamed it
[08:26:08] <raster> ok copied on again
[08:26:33] <raster> nup
[08:26:36] <raster> still no lov
[08:26:45] * ceyusa_ (n=ceyusa@cm216016.red83-165.mundo-r.com) has joined #beagle
[08:27:01] <koen> you could try zcatting this to the raw device (e.g. /dev/sde): http://amethyst.openembedded.net/~koen/narcissus/conf/beagleboard/sd/sd-1a6c3e414997d91e2f68b30aeee7ab21.img.gz
[08:27:12] <raster> this is the overo
[08:27:17] * garren|work (n=chatzill@mail.dm.co.za) Quit (Remote closed the connection)
[08:27:23] <raster> it seems to be missing x-loader
[08:27:25] <koen> same rom code
[08:27:31] <koen> MLO == xloader
[08:27:32] <raster> all i get it garbage from the rom
[08:27:48] <raster> so the rom has enouhg logic to load mlo from fat on part1 of sd?
[08:27:55] <koen> that img.gz has a properly formatted fat
[08:27:58] <koen> yes
[08:28:07] <koen> that makes the omap3 'unbrickable'
[08:28:13] * garren|work (n=chatzill@mail.dm.co.za) has joined #beagle
[08:28:13] <raster> cool
[08:28:19] <raster> i didnt expect that much of it
[08:28:25] <raster> i was expecting to need to jtaf the sucker
[08:28:28] <raster> err jtag
[08:28:34] <raster> thats awesome
[08:28:37] <koen> but it needs a certain kind of SD card partiioning (cols, cylinders, heads) and MLO needs to be the first entry
[08:28:41] <raster> ti: thumbs up for that awesomeness
[08:28:47] <raster> hmm
[08:28:51] <raster> ok
[08:28:56] <raster> i just made it 32M
[08:29:12] <raster> i suspect my sd isnt
[08:29:53] <raster> Device Boot Start End Blocks Id System
[08:29:53] <raster> /dev/sde1 * 1 32 16096+ c W95 FAT32 (LBA)
[08:29:53] <raster> /dev/sde2 33 983 479304 83 Linux
[08:29:58] <koen> this is a script that makes a loop image you can dd onto the card: http://www.beagleboard.org/~arago/mksdimg.txt
[08:30:00] <raster> ok
[08:30:08] <raster> seems i decided to ignore part of the formatting setup
[08:30:08] <raster> :)
[08:30:28] <koen> once you have uboot in flash the formatting becomes moot
[08:30:41] <koen> (xload and uboot inflash, that is)
[08:30:56] <koen> actually
[08:31:02] <koen> only xload in flash would do :)
[08:31:44] * mib_05171s (i=c05b3c0b@gateway/web/ajax/mibbit.com/x-ac7a5f826cde432f) Quit ("http://www.mibbit.com ajax IRC Client")
[08:33:37] <raster> yeah
[08:33:49] <raster> i think my bb has that fine in flash
[08:33:58] <raster> thus my uboot and so on work regardless of special sd formatting
[08:36:42] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) Quit (Read error: 104 (Connection reset by peer))
[08:36:52] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) has joined #beagle
[08:37:14] <raster> thansk for slapping me
[08:37:20] <raster> i missed the special cylinder/header thing
[08:37:30] <raster> and need to get back to my neon fun
[08:40:32] <raster> oooh POOPIE
[08:40:33] <raster> again
[08:40:38] <raster> ok
[08:40:41] <raster> time to do your image
[08:41:44] <raster> koen: what is that s image
[08:41:49] <raster> a fuill disk image with partitions?
[08:41:53] <raster> looks like it
[08:42:11] <raster> its too big for my sd
[08:42:12] <raster> 1g
[08:42:17] <raster> i've got 512m
[08:42:28] <raster> goign to lose the rootfs
[08:42:34] <raster> i guess it won't hurt
[08:43:35] <raster> wtf
[08:43:37] <raster> read only fs...
[08:43:48] * ceyusa (n=ceyusa@cm216016.red83-165.mundo-r.com) Quit (Read error: 110 (Connection timed out))
[08:45:18] <raster> oh crap
[08:45:19] <raster> reboot time
[08:46:33] * raster (n=raster@124-170-16-168.dyn.iinet.net.au) Quit ("Gettin' stinky!")
[08:48:46] * khasim wonders if youtube still needs flash support.
[08:49:06] <khasim> has any one tried the latest youtube "HD" on beagle ?
[08:49:58] <_AV500_> khasim: how would it work without flash
[08:50:50] <khasim> not sure, :)
[08:51:07] <khasim> was just guessing ...
[08:54:21] * shri (i=3d5fc3cd@gateway/web/ajax/mibbit.com/x-b0eb2d014f754f61) Quit ("http://www.mibbit.com ajax IRC Client")
[08:57:52] <koen> kulve: I'm having some problems booting your uimage/uboot/rootfs set, I'll go hunt for a nullmodem cable later today
[08:59:34] <_AV500_> koen: I am a bit puzzled by the state of openGL, seeing your demo on one side and one the other side mailing list telling that kernel drivers and SDK do not match?
[09:03:57] * RogerMonk (n=a0740758@nat/ti/x-5bb5bbbde8c81bb2) has joined #beagle
[09:08:08] <koen> _AV500_: drivers being unavailable from an SDK doesn't mean TI doesn't have those
[09:11:18] * khasim wants to know if Mikko Ylinen from nokia is on this IRC
[09:11:26] * stimp (i=7d65b2b4@gateway/web/ajax/mibbit.com/x-35efefb5ded0efba) Quit ("http://www.mibbit.com ajax IRC Client")
[09:12:05] <khasim> I would like to use drivers/i2c/chips/twl4030-madc.c MADC driver to get Power measurements. Just looking around for some test cases
[09:17:27] <koen> khasim: as Frank Agius, he's working with the MADC driver on his gumstix
[09:18:11] <koen> khasim: d
[09:18:17] <koen> khasim: ftagius@yahoo.com
[09:23:59] <khasim> koen: thanks
[09:26:43] <khasim> mailed to list and frank
[09:28:02] <koen> RogerMonk: how's the CE hacking coming along?
[09:43:48] <RogerMonk> hi koen - yep, going well - cmem changes look good, some example build problems, working though at the moment
[09:47:39] <koen> great!
[09:55:56] * mpoullet (n=mpoullet@proxye.avm.de) has joined #beagle
[10:00:13] * abitos (n=nixgibts@dslb-084-057-178-087.pools.arcor-ip.net) has joined #beagle
[10:04:58] <craw> good morning
[10:06:03] * DJWillis (n=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) has joined #beagle
[10:09:47] * eFfeM (n=frans@195-241-226-180.ip.telfort.nl) has joined #beagle
[10:10:22] <koen> sweet
[10:10:31] <koen> UPS dropped of a package from gumstix
[10:20:00] * RogerMon1 (n=a0740758@nat/ti/x-e9dfe098a974647f) has joined #beagle
[10:20:09] * florian_kc (n=fuchs@217.146.132.69) has joined #beagle
[10:21:55] <kulve> koen: no need to put too much time to it..
[10:22:18] <koen> kulve: I want a newer uboot anyway
[10:23:36] * kmwang (n=angelic4@mail.CDPA.cc) Quit (Remote closed the connection)
[10:23:45] * kmwang (n=angelic4@mail.CDPA.cc) has joined #beagle
[10:25:48] <eFfeM> koen, odd thing, I used your patch for base.bbclass with success, now i got a new base.bbclass with the patch already in it but now I get an ERROR not checking URI, followed by an exception, any idea what could be wrong ?
[10:26:40] * Stasi (n=stancho@78.90.99.168) has joined #beagle
[10:27:05] * florian_kc is now known as florian
[10:27:08] <koen> did you se OE_STRICT_CHECKSUMS = "" in local.conf?
[10:27:27] <eFfeM> no, should I? it was not there before
[10:28:10] <koen> you could try 'git checkout classes/base.bbclass' to eliminate local diff
[10:28:13] <eFfeM> guess i should as bitbake.conf sets it to 1
[10:28:28] <koen> ah right
[10:28:32] <koen> yes, I defined it to 1 :)
[10:28:39] <eFfeM> guess that was not defined there before
[10:28:55] * Stskeeps (n=chobits@84.238.11.16) Quit ("Reconnecting")
[10:29:00] * Stskeeps (n=chobits@84.238.11.16) has joined #beagle
[10:29:05] <koen> right
[10:29:09] * raster (n=raster@124-170-16-168.dyn.iinet.net.au) has joined #beagle
[10:29:11] <eFfeM> i already tried setting to "0" but not to ""
[10:29:54] <eFfeM> trying now with ""
[10:30:02] <raster> oka back to creating life
[10:30:16] <koen> hey raster
[10:30:23] <koen> raster: 11:09 < koen> UPS dropped of a package from gumstix
[10:30:25] <koen> :)
[10:30:38] <raster> koen: welcome to my world now
[10:30:39] <raster> :)
[10:30:57] <raster> bware of the power supply
[10:31:00] <raster> its NOT universal
[10:31:37] <koen> input: 100-240VAC
[10:31:53] <raster> crap!
[10:31:57] <raster> they gave me the 100v one
[10:32:14] * RogerMonk (n=a0740758@nat/ti/x-5bb5bbbde8c81bb2) Quit (Remote closed the connection)
[10:32:18] <koen> this is the *first* time I get a proper .eu wall wart from a US company
[10:32:28] <koen> even openmoko sent me a US style one
[10:33:07] <florian> good morning
[10:33:34] <eFfeM> koen with "" it indeed works as expected
[10:34:34] * felipec (n=felipec@a91-153-251-222.elisa-laajakaista.fi) has joined #beagle
[10:40:53] <koen> sweet
[10:41:01] <koen> my overo has angstrom in nand :)
[10:44:49] <garren|work> koen: preloaded with angstom?
[10:45:35] <raster> crap
[10:45:37] <raster> still no luck
[10:45:57] * eFfeM (n=frans@195-241-226-180.ip.telfort.nl) Quit (Read error: 104 (Connection reset by peer))
[10:46:09] * Stasi (n=stancho@78.90.99.168) Quit ()
[10:46:17] <raster> koen: with your sd image no lcuk (even though i put it on a 512m microsd - i expected rotofs to be screwed but hey. ...)
[10:46:49] * eFfeM (n=frans@195-241-226-180.ip.telfort.nl) has joined #beagle
[10:47:58] * aleij (n=ad@adsl-84-226-25-33.adslplus.ch) has joined #beagle
[10:51:01] <koen> garren|work: yes
[10:51:18] <raster> koen: i'l swap you!
[10:51:31] <raster> you can have this one preloaded with blank flash
[10:51:32] <raster> :)
[10:53:15] <garren|work> koen: cool, beagleboard should maybe have that aswell...
[10:54:01] <koen> http://www.flickr.com/photos/koenkooi/3253096474/
[10:55:43] * felipec (n=felipec@a91-153-251-222.elisa-laajakaista.fi) Quit ("Leaving")
[10:57:01] * aleij (n=ad@adsl-84-226-25-33.adslplus.ch) has left #beagle
[10:59:03] <raster> koen: its cute isn't it?
[10:59:19] <koen> indeed
[10:59:29] <raster> the caughterboard ruins it tho
[10:59:31] <raster> its so big
[10:59:49] <raster> iv u have a db that size i'd love to see some 2.8" vga
[10:59:50] <koen> I'm waiting for gumstix to release the summit + ethernet
[11:00:01] <raster> or 3" wqvga or so touchs-creen mounted on the back
[11:00:04] * eFfeM1 (n=frans@195-241-226-180.ip.telfort.nl) has joined #beagle
[11:00:08] * garren|work_ (n=chatzill@mail.dm.co.za) has joined #beagle
[11:00:20] <raster> at least justify the massive size by having an lcd on the other side
[11:00:21] <raster> :)
[11:00:47] * eFfeM (n=frans@195-241-226-180.ip.telfort.nl) Quit (Read error: 104 (Connection reset by peer))
[11:01:29] * garren|work (n=chatzill@mail.dm.co.za) Quit (Read error: 54 (Connection reset by peer))
[11:01:33] * garren|work_ is now known as garren|work
[11:02:28] <koen> hmm
[11:02:38] <koen> 4, 6, 8, or 16GB micro sd card
[11:02:46] * eFfeM1 is now known as eFfeM
[11:06:50] <raster> GAAAAAH
[11:08:08] <raster> ???t???b???$U
[11:08:08] <raster> ???D?????? ??? ???
[11:08:11] <raster> thats all i get
[11:08:14] <raster> poo ... poo
[11:08:23] <raster> maybe me haz dudz
[11:08:43] <koen> I just discovered I don't have a spare microsd card
[11:08:51] <raster> none!
[11:08:54] <raster> nooooo!
[11:08:57] * koen wants to replicate rasters problem
[11:10:24] <raster> well first - mine came with empty flash
[11:10:33] <raster> so thats bad in that now i'm using the backup boot method
[11:10:43] <raster> and backup isnt working
[11:11:16] <raster> despite as best i can seee.. my microsd (it's a sandisk so it should be fine) its fromatted right
[11:11:22] <koen> you could try the usb method
[11:11:24] <raster> with the right heads/sectors/cylinders
[11:11:28] <raster> right filesystems
[11:11:28] <koen> (which I haven't tried)
[11:11:34] <raster> right filenames in the right spots
[11:11:39] <raster> hmm
[11:11:49] <raster> usb via?
[11:11:56] <raster> (never looked into it myself either)
[11:12:02] <koen> the rom code also supports USB
[11:12:25] <koen> usb, serial, nand, sd and usb
[11:13:02] <raster> 2 usb's?
[11:13:06] <raster> how does it boot over usb?
[11:13:20] <raster> like usb storage as a usb host?
[11:13:24] <koen> you transfer MLO over usb which it will boot
[11:13:31] <koen> using some TI protocol
[11:13:38] <raster> right now i just get an ftdi device
[11:13:48] <raster> via the ftdi serial link?
[11:13:55] <koen> no, using the OTG port
[11:14:40] <koen> raster: see http://nishanthmenon.blogspot.com/
[11:19:38] <raster> none of them help :(
[11:20:02] <raster> dont have any jtag equipment
[11:20:22] <raster> cant even get to the point of checking registers or pins etc.
[11:23:13] <koen> heh
[11:23:37] <koen> mail from gumstix: "check your wallwart, there have been misshipments lately"
[11:24:23] <raster> koen: YOU got it ok
[11:24:24] <raster> :)
[11:24:55] * Viral_Sachde (n=Viral_Sa@59.97.2.11) Quit (Read error: 110 (Connection timed out))
[11:25:51] * Viral_Sachde (n=Viral_Sa@59.97.2.11) has joined #beagle
[11:53:28] * CarlMle (i=d5d20d1e@gateway/web/ajax/mibbit.com/x-7ec7ad5e426e2482) has joined #beagle
[11:55:49] <CarlMle> im looking at writing a basic GUI using the beagle that may interface to a touch screen, Im just looking at how I would go about it, should i use a window manager? or is it easy enough to write images to the screen and track mouse clicks etc..
[11:57:58] <raster> do you know what a window manager is?
[11:59:05] <koen> raster: how do I rip out everything out of illume minus the shelf and vkb?
[11:59:10] <_AV500_> raster: a manager at microsoft?
[11:59:14] <koen> raster: I can't figure out how to use the "desktop"
[11:59:35] <koen> raster: it's either empty or have huge coloured pixels with 5 lines of text
[11:59:40] <CarlMle> yeah Matchbox, Enlightenment gnome etc..
[11:59:50] <koen> gnome isn't a window manager
[12:00:03] <CarlMle> x11
[12:00:12] <koen> x11 isn't a window manager either
[12:00:17] * Viral_Sachde (n=Viral_Sa@59.97.2.11) Quit (Read error: 110 (Connection timed out))
[12:00:49] <CarlMle> "Window System" then :)
[12:01:10] * Viral_Sachde (n=Viral_Sa@59.97.2.11) has joined #beagle
[12:03:09] <CarlMle> Matchbox looks okay, seems to do what I want, single window at a time
[12:06:49] <jkridner> good morning all
[12:07:09] <jkridner> hi khasim
[12:09:15] <garren|work> morning jkridner
[12:12:13] <jkridner> can anyone here give my u-boot.bin a shot?
[12:13:53] <koen> jkridner: which uboot.bin?
[12:14:16] <raster> _AV500_: HAHAHAHHAHA
[12:14:32] <raster> koen: oooh... illume is one big fat module
[12:14:33] <raster> you cant
[12:14:36] <raster> i need to split it up
[12:14:38] <raster> really do
[12:14:46] <raster> its too much in one spot and thats on my todo list
[12:14:48] <jkridner> http://www.beagleboard.org/~arago/u-boot-20090203d.bin
[12:14:49] * royerfa (n=fabroy01@fw-tnat.cambridge.arm.com) has joined #beagle
[12:15:02] <koen> jkridner: does that honour env in NAND?
[12:15:06] * Shivdas (n=shivdas@59.160.172.220) has joined #beagle
[12:15:15] <jkridner> no, do you want one that does?
[12:15:20] <koen> of course
[12:15:56] <jkridner> http://www.beagleboard.org/~arago/u-boot-f-20090203d.bin
[12:17:41] <garren|work> CarlMle: Might be worth taking a look at QT Embedded
[12:21:53] <CarlMle> koen : you probably know, just noticed your feed browser has stopped working .. "Notice: Undefined variable: output in /var/www/angstrom/repo/includes/functions.inc on line 424"
[12:25:36] <jkridner> koen: any luck?
[12:28:51] * magnet_ (n=magnet@AMontpellier-259-1-124-150.w92-143.abo.wanadoo.fr) has joined #beagle
[12:34:19] * ogra (n=ogra@ubuntu/member/ogra) Quit (Read error: 60 (Operation timed out))
[12:40:57] <koen> jkridner: trouble reaching beagleboard.org atm
[12:41:16] <jkridner> :(
[12:41:25] <jkridner> something wrong on your side?
[12:41:54] <koen> Connecting to www.beagleboard.org[75.101.156.174]:80... failed: Connection timed out.
[12:47:11] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
[12:48:17] <jkridner> can anyone else try the link?
[12:51:11] <CarlMle> fine for me
[12:51:30] <khasim> works for me too
[12:54:05] * aleij (n=ad@adsl-84-227-61-80.adslplus.ch) has joined #beagle
[12:57:07] * Viral_Sachde (n=Viral_Sa@59.97.2.11) Quit ("Leaving.")
[12:57:28] * aleij (n=ad@adsl-84-227-61-80.adslplus.ch) has left #beagle
[13:00:31] * __alanc__ (n=a-campbe@nat/ti/x-a26610fe5bfe66d0) has joined #beagle
[13:01:47] * maelcum (n=quassel@e178182120.adsl.alicedsl.de) Quit (Read error: 110 (Connection timed out))
[13:04:11] * maelcum (n=quassel@e178143060.adsl.alicedsl.de) has joined #beagle
[13:07:21] <koen> it works now
[13:11:33] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
[13:11:40] * methril is now known as methril|lunch
[13:13:33] <koen> jkridner: I get a nice beagle logo on my pico :)
[13:14:30] * recalcati (i=51485a4f@gateway/web/ajax/mibbit.com/x-40d5a60272bd5993) Quit ("http://www.mibbit.com ajax IRC Client")
[13:17:56] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-e23eed9514d3ffcc) has joined #beagle
[13:19:09] <jkridner> koen: yeah, specifically placed to look good on the pico.
[13:19:24] <jkridner> still doesn't work on my HDTV, but it does work on my DVI-D monitor.
[13:19:39] <jkridner> I think that the DSI PLL would be required to make it work for my HDTV.
[13:19:55] <koen> it does flicker a bit on the pico
[13:20:06] <jkridner> I used the 1280x768 settings that I believe were used in the Rev B u-boot.
[13:20:06] <koen> but it;s better than the garbled image I had before
[13:20:09] * BThompson (n=BThompso@nat/ti/x-16d5c53038aa0957) has joined #beagle
[13:21:48] * NishanthMenon (n=nmenon@nat/ti/x-79b09c990130bafa) has joined #beagle
[13:30:50] * robclark (n=robclark@nat/ti/x-35b19f5b82b2dda7) has joined #beagle
[13:31:13] * cbrake_away is now known as cbrake
[13:32:02] * rsalveti (n=salveti@189.70.71.70) Quit (Read error: 104 (Connection reset by peer))
[13:33:51] * new2this (i=621a62ec@gateway/web/ajax/mibbit.com/x-55385715017cb173) has joined #beagle
[13:33:59] <new2this> hi room
[13:34:35] <new2this> whats the latest REV for the beagleboard as of now?
[13:34:50] <koen> B7
[13:35:42] <new2this> thanks, where can i find the specs for B7
[13:36:04] * emints (n=jack@postoffice.embeddedalley.com) has joined #beagle
[13:36:34] <garren|work> new2this: on www.beagleboard.org or the wiki
[13:38:20] <new2this> thanks
[13:38:37] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-e23eed9514d3ffcc) Quit ("http://www.mibbit.com ajax IRC Client")
[13:40:57] <new2this> found it
[13:46:10] * ogra_ (n=ogra@port-213-160-23-156.static.qsc.de) has joined #beagle
[13:46:58] * atin_ (n=atin@c-71-232-7-71.hsd1.ma.comcast.net) has joined #beagle
[13:47:46] * new2this (i=621a62ec@gateway/web/ajax/mibbit.com/x-55385715017cb173) Quit ("http://www.mibbit.com ajax IRC Client")
[13:48:17] * shri (i=3d5fc3cd@gateway/web/ajax/mibbit.com/x-3d4e315a01ad61dc) has joined #beagle
[13:49:59] <koen> eFfeM: did you get coherence working?
[13:53:19] * ogra (n=ogra@ubuntu/member/ogra) Quit (Read error: 113 (No route to host))
[13:59:39] <eFfeM> koen, no
[13:59:52] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-0790828e56c70c0d) has joined #beagle
[13:59:54] <eFfeM> the package mickey made does not even install for me
[14:00:09] <eFfeM> it bails out with some opkg error
[14:00:31] <eFfeM> tried opkg --verbose but that did not help me
[14:00:48] <eFfeM> could you try an install ?
[14:01:44] * jkridner|work (n=a0321898@nat/ti/x-6c0e6cc7ce0cd530) has joined #beagle
[14:03:43] <koen> building...
[14:03:55] <eFfeM> now trying to get pciutils up to the latest version so I can try to port ddccontrol
[14:04:13] <eFfeM> koen it is in the feed: python-coherence
[14:04:40] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
[14:07:11] <eFfeM> afk for a while
[14:09:34] * hundfred (i=hundfred@pm.s23.org) has joined #beagle
[14:09:50] * gcohler (n=gcohler@nat/ti/x-5fa2cd118faf56ef) has joined #beagle
[14:10:47] * montamer (n=vijay@203.199.213.3) has joined #beagle
[14:11:34] <gcohler> Has anyone played with ekiga on beagle? I'm finding it extremely fragile. It seg faults much of the time.
[14:14:09] <koen> same here
[14:14:21] * zedstar (n=john@fsf/member/zedstar) has joined #beagle
[14:14:30] <koen> I have a suspicion that the 'unstable' versions of opal and ptlib are indeed unstable
[14:15:06] <gcohler> it's not much more stable on my Ubuntu desktop. :-)
[14:15:31] <sakoman> good morning
[14:15:44] <gcohler> and to you too. :-)
[14:15:57] * abitos (n=nixgibts@dslb-084-057-178-087.pools.arcor-ip.net) Quit (Read error: 113 (No route to host))
[14:16:27] <sakoman> hmm . . . looks like raster didn't have much luck with his overo
[14:16:44] <sakoman> I hope the wrong wall wart incident didn't fry something :-(
[14:17:44] <gcohler> I'm not sure what a "wrong wall wart" incident is. But it sounds bad.
[14:18:24] * prpplague (n=dave@mail.americanmicrosystems.com) has joined #beagle
[14:18:26] <sakoman> gumstix sent him a 110 wall wart and he plugged it into 240
[14:18:49] * methril|lunch (n=Methril@213.27.233.98) Quit (Remote closed the connection)
[14:18:50] <sakoman> fried the wall wart, and hopefully nothing else
[14:19:00] <mru> fish and chips...
[14:19:19] <hundfred> i wonder why my gui is allready showing search-results while the webgui still doesnt find anything, is that normal while indexing files for the first time, or did i miss something?
[14:19:28] <gcohler> Ah. Most wall warts are 110-240. But if it isn't, my guess is that he now has a very inefficient paper weight.
[14:20:37] <prpplague> sakoman: doh
[14:20:51] <gcohler> I just checked the plug that came with my overo and it's 110-240 -- so he might be ok.
[14:21:09] <sakoman> his said 110 only
[14:21:43] <gcohler> Oops.
[14:22:13] <gcohler> BTW, you had mentioned some desktop gadgets -- and I haven't found them. Where do I look?
[14:23:53] * prpplague is a smart ass and answers "on your dekstop?"
[14:23:54] <sakoman> left click on the desktop use the enlightenment settings
[14:24:02] * dcramer_ (n=davec@dcdsl.ebox.com) Quit ()
[14:24:05] * rupeshgujare1 (n=rupesh@59.160.172.220) has joined #beagle
[14:24:20] <sakoman> you'll have to enable the modules and then the gadget
[14:24:30] <sakoman> try News
[14:24:44] <gcohler> Ok, I'll give it a try.
[14:25:14] <sakoman> I'm in the middle of switching to DSS2 so I don't have a running system to give you the exact steps
[14:25:29] <sakoman> writing the code to support the new LCD & TS
[14:26:19] * rupeshgujare2 (n=rupesh@59.160.172.220) has joined #beagle
[14:28:46] * CruNcher (n=luls_lol@dslb-084-058-152-083.pools.arcor-ip.net) Quit ()
[14:28:49] * CruNcher (n=luls_lol@dslb-084-058-152-083.pools.arcor-ip.net) has joined #beagle
[14:30:31] <sakoman> off for coffee, back in a bit
[14:30:41] <gcohler> Got it. Feeds working great now. It was "loading the modules" that I didn' t know about. Thanks much. Looking forward to dss2.
[14:31:07] <sakoman> gcohler: *much* nicer with dss2!
[14:31:18] * gcohler appreciates a good smart ass. as I am one too. :-)
[14:31:28] <sakoman> playing dvd's even works (as koen discovered earlier)
[14:31:58] <sakoman> ok, later. need caffeine!
[14:32:05] <gcohler> enjoy.
[14:33:44] * methril (n=Methril@213.27.233.98) has joined #beagle
[14:35:17] * mib_k4yzh7 (i=812ad0b1@gateway/web/ajax/mibbit.com/x-cf49ea1e523dbf64) has joined #beagle
[14:35:24] * orifice_work (n=aho@67.71.223.35) has joined #beagle
[14:36:59] * rsalveti (n=salveti@200.184.118.130) has joined #beagle
[14:39:49] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
[14:40:33] * gcohler_bb (i=60ed335e@gateway/web/ajax/mibbit.com/x-f5366d284665bbfe) has joined #beagle
[14:41:25] * rupeshgujare (n=rupesh@59.160.172.220) Quit (Read error: 113 (No route to host))
[14:44:16] * rupeshgujare1 (n=rupesh@59.160.172.220) Quit (Read error: 113 (No route to host))
[14:44:35] * Batko_Marto (n=Batko_Ma@CPE001346f996d2-CM001e6b1a8d1e.cpe.net.cable.rogers.com) has joined #beagle
[14:44:39] * JuanG (n=Juan@nat/ti/x-213fbc34e99c2cda) has joined #beagle
[14:44:43] * JuanG (n=Juan@nat/ti/x-213fbc34e99c2cda) has left #beagle
[14:51:37] * rupeshgujare2 (n=rupesh@59.160.172.220) has left #beagle
[14:55:50] * Shivdas (n=shivdas@59.160.172.220) Quit ("Leaving.")
[15:09:56] * koen_ (n=koen@s55917625.adsl.wanadoo.nl) has joined #beagle
[15:13:54] <koen> sakoman: I suspect you will get some merge conflict when pulling .dev
[15:14:09] <koen> sakoman: I'm trying to integrate the overo stuff into .dev
[15:14:15] * brijesh (n=bksingh@nat/ti/x-30a6e6f3393953f8) has joined #beagle
[15:14:33] <sakoman> koen: no problem, I deal with it all the time
[15:15:01] <sakoman> glad to hear you didn't have the same issues as raster
[15:15:16] <sakoman> I hope his board isn't fried
[15:15:31] <sakoman> I'm surprised that it appears to have arrived without anything in nand
[15:15:33] <koen> it does spit out garbage on serial
[15:15:43] <sakoman> yeah, that is a good sign
[15:15:59] <sakoman> hopefully he just needs a good bootable microSD
[15:15:59] <koen> my board has no R26 resistor
[15:16:12] <sakoman> good, so ehci should work
[15:16:27] <koen> can the ehci port provide 500mA?
[15:16:47] <sakoman> IIRC it should
[15:16:58] <koen> ok
[15:17:03] <sakoman> I think it has a half amp regulator
[15:17:07] <koen> so I probably need a newer kernel
[15:17:40] <sakoman> you can steal one from my feeds if 2.6.28 is OK
[15:18:24] <sakoman> I should have a 2.6.29 recipe checked in later today with support for all the upcoming expansion boards as well as dss2
[15:18:53] <sakoman> and a matching u-boot with dss2 default environment
[15:19:00] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
[15:19:01] <koen> nice
[15:19:09] <koen> I have an overo 2.6.28 dss2 kernel as well
[15:19:20] <koen> although I suspect it needs some glue
[15:19:49] <sakoman> perhaps, though gumstix and overo revC are pretty close
[15:20:04] <sakoman> er beagle & overo :-)
[15:20:15] * koen_ (n=koen@s55917625.adsl.wanadoo.nl) Quit ("Get Colloquy for iPhone! http://mobile.colloquy.info/")
[15:20:19] * garren|work (n=chatzill@mail.dm.co.za) Quit ("ChatZilla 0.9.84 [Firefox 3.0.5/2008120122]")
[15:20:21] <sakoman> er . . . and reverse them :-)
[15:20:27] <sakoman> I need more coffee!!!
[15:20:36] <sakoman> Probably not safe to write code
[15:21:28] * koen_ (n=koen@s55917625.adsl.wanadoo.nl) has joined #beagle
[15:24:41] * alecrim (n=alecrim@189.2.128.130) has joined #beagle
[15:30:30] * methril is now known as methril|away
[15:34:50] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) Quit (Read error: 104 (Connection reset by peer))
[15:35:11] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) has joined #beagle
[15:43:18] * geckosen1tor (n=sean@adsl-68-73-98-69.dsl.dytnoh.sbcglobal.net) Quit (Read error: 60 (Operation timed out))
[15:47:03] * geckosenator (n=sean@adsl-68-73-98-69.dsl.dytnoh.sbcglobal.net) has joined #beagle
[15:53:30] <eFfeM> koen did you have any success with python-coherence?
[15:59:25] * emeb (n=ericb@ip72-223-90-212.ph.ph.cox.net) has joined #beagle
[16:01:11] * garren (n=garren@41.246.4.3) has joined #beagle
[16:01:38] * _don_ (n=don@nat/ti/x-6b90e915884847fb) has joined #beagle
[16:03:15] <koen> eFfeM: not yet
[16:03:38] * koen is trying to get the SGX working on overo
[16:04:21] * montamer (n=vijay@203.199.213.3) Quit (Read error: 104 (Connection reset by peer))
[16:05:48] <eFfeM> koen, np, just thought I'd as since i was away for a while
[16:06:54] <eFfeM> actually in the end i would like to have the current svn head as a package as it fixes a few bugs, but if 0.6 does not even install/run it is fairly pointless to port the head
[16:07:11] * montamer (n=vijay@203.199.213.3) has joined #beagle
[16:10:34] * zedstar (n=john@fsf/member/zedstar) Quit (Remote closed the connection)
[16:14:51] <BeagleBot> http://beagleboard.org/resources/ was edited by blog.hangerhead.com
[16:17:18] <sakoman> koen: what have you found to be a safe vram size for dss2?
[16:17:34] <sakoman> want to set the deault to something rational
[16:19:09] * kozak (n=subbu@117.192.17.218) has joined #beagle
[16:26:39] * Xerion (i=xerion@82-170-197-160.ip.telfort.nl) has joined #beagle
[16:27:07] <BeagleBot> http://beagleboard.org/project/U-Boot+%28V1%29/ was edited by dirkbe.myopenid.com
[16:27:40] * FuL|OUT is now known as fulgas
[16:27:57] * mckoan is now known as mckoan|away
[16:31:32] * mpoullet (n=mpoullet@proxye.avm.de) has left #beagle
[16:31:54] * _AV500_ (n=AV500@sac91-1-82-232-88-182.fbx.proxad.net) Quit (Read error: 113 (No route to host))
[16:36:27] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-0790828e56c70c0d) Quit ("http://www.mibbit.com ajax IRC Client")
[16:39:08] <koen> sakoman: I use 12M
[16:39:10] <BeagleBot> http://beagleboard.org/resources/ was edited by blog.hangerhead.com
[16:39:16] <koen> sakoman: so I can allocate 4M for each framebuffer
[16:40:20] <BeagleBot> http://beagleboard.org/resources/ was edited by blog.hangerhead.com
[16:41:05] * shri (i=3d5fc3cd@gateway/web/ajax/mibbit.com/x-3d4e315a01ad61dc) Quit ("http://www.mibbit.com ajax IRC Client")
[16:43:59] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-090cb96d6877016d) has joined #beagle
[16:46:04] <sakoman> koen: thanks, I'll do the same
[16:52:17] * dirk2 (n=dirk@p5B0404AE.dip0.t-ipconnect.de) has joined #beagle
[16:56:05] <dirk2> atin_: Got http://www.beagleboard.org/irclogs/index.php?date=2009-02-03#T21:07:27 , too, while using gitorious. No idea what it is. I ignored it.
[16:56:38] <atin_> I've been ignoring it too :)
[16:56:54] <atin_> I'm still trying to debug the random hangs I get when I hit the reset button
[16:57:04] <atin_> if I do it like 3-4 times in a row, it hangs.
[16:57:23] <atin_> but if instead of the reset button, I always type "reset" at the u-boot prompt, it doesn't hang
[16:57:33] <atin_> it is as if the reset button and the "reset" command are doing different things
[16:58:19] <atin_> the reset command does a cpu reset it seems - PLL and MPU resets according to the comment.
[16:58:27] <atin_> not sure what the reset button does
[16:58:34] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-090cb96d6877016d) Quit ("http://www.mibbit.com ajax IRC Client")
[16:59:34] * gcohler_bb (i=60ed335e@gateway/web/ajax/mibbit.com/x-f5366d284665bbfe) Quit ("http://www.mibbit.com ajax IRC Client")
[16:59:43] <atin_> and now someone emailed me wanting to know if they can put the rootfs on a usb stick and expect it to boot ..
[17:00:07] * pH5 (n=ph5@e178219227.adsl.alicedsl.de) has joined #beagle
[17:02:09] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-d0a79ba7ee5664cf) has joined #beagle
[17:03:59] <BeagleBot> http://beagleboard.org/resources/ was edited by blog.hangerhead.com
[17:07:14] <Batko_Marto> koen: I'm still not being able to bake the beagleboard-demo-image. It still fails on rootfs with kernel-image not satisfied even after rebuilding virtual/kernel
[17:07:43] <Batko_Marto> I don't know what I'm doing wrong
[17:08:18] <dirk2> jkridner, jkridner|work: Thanks for http://lists.denx.de/pipermail/u-boot/2009-February/046767.html ! I understand this as 'I like this series, j24 please apply' (?)
[17:08:21] * koen neither
[17:09:39] <Batko_Marto> any ideas how to fix hat?
[17:10:03] * CarlMle (i=d5d20d1e@gateway/web/ajax/mibbit.com/x-7ec7ad5e426e2482) Quit ("http://www.mibbit.com ajax IRC Client")
[17:10:09] <atin_> if one was actually to get usb mass storage available in u-boot, what would its device be?
[17:10:33] <atin_> as in, what would the linux command line be to point at the rootfs?
[17:10:53] * bernard_ (n=bernard@mersenne.largestprime.net) Quit (Read error: 110 (Connection timed out))
[17:11:02] <atin_> I don't know what usb drives show up as .. guess I can just plug one into my ubuntu box ..
[17:11:25] * gregoiregentil (n=zonbu@adsl-71-135-96-77.dsl.pltn13.pacbell.net) has left #beagle
[17:12:02] <dirk2> keesj: Any OpenOCD news? I wonder if we should bother jkridner/TI for more JTAG infos?
[17:12:05] <erbo> I'm setting up a new oe env and when I try to build shared-mime-info-native it fails, has something to do with libxml2.. is this something known?
[17:14:37] <atin_> woof, its complicated to boot off usb!
[17:18:02] <sakoman> koen: do you know where enlightenment puts its error log? just tried a rootfs from yesterday with dss2 and it dies at boot with that "something bad happened" dialog. Screen is doubled in the x direction.
[17:18:34] <sakoman> works fine with dss1, just has the issue with dss2. rootfs from a couple of days ago works fine with both :-(
[17:19:00] <sakoman> two steps forward, one back :-)
[17:20:53] <koen> sakoman: no idea, I wondered the same about e logs
[17:21:02] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-d0a79ba7ee5664cf) Quit ("http://www.mibbit.com ajax IRC Client")
[17:23:53] * royerfa (n=fabroy01@fw-tnat.cambridge.arm.com) Quit (Read error: 60 (Operation timed out))
[17:24:36] * royerfa (n=fabroy01@fw-tnat.cambridge.arm.com) has joined #beagle
[17:29:04] * alecrim (n=alecrim@189.2.128.130) Quit (Remote closed the connection)
[17:31:34] * alecrim (n=alecrim@189.2.128.130) has joined #beagle
[17:31:55] * Xerion (i=xerion@82-170-197-160.ip.telfort.nl) Quit (" ")
[17:33:42] * ogra_ (n=ogra@port-213-160-23-156.static.qsc.de) Quit (No route to host)
[17:37:47] * mib_ucpqg2 (i=c05b3c0b@gateway/web/ajax/mibbit.com/x-73076131f9635fea) has joined #beagle
[17:38:11] * mib_ucpqg2 is now known as vincent2
[17:38:16] <vincent2> Hi
[17:40:11] <vincent2> I've got some problems flashing x-loader. After flashing x-loader and rebooting the BB, i get an "ECC failed" error at startup .. does someone has already seen that ?
[17:40:32] * Flippy1320 (i=80775be2@gateway/web/ajax/mibbit.com/x-f7062cde3d009ac9) has joined #beagle
[17:40:43] * montamer (n=vijay@203.199.213.3) Quit (Read error: 104 (Connection reset by peer))
[17:40:56] <Flippy1320> quick question... does the angstrom image for the beagleboard come with python installed?
[17:41:40] <Flippy1320> i saw it when i was doing all the loading into the sd card python files but i cant find it in angstrom
[17:44:21] <dirk2> vincent2: In Google try 'site:beagleboard.org ECC failed' if anything there can help you. I remember that it might be discussed here, but I can't remember the fix.
[17:46:43] <vincent2> I did dirk2 ... but i didn't find a "real" answer
[17:49:06] <Flippy1320> brb
[17:49:10] * Flippy1320 (i=80775be2@gateway/web/ajax/mibbit.com/x-f7062cde3d009ac9) Quit ("http://www.mibbit.com ajax IRC Client")
[17:50:28] * BeagleNewbie (i=d98c6e17@gateway/web/ajax/mibbit.com/x-7720085fe7bcbea4) has joined #beagle
[17:50:36] * koen_ (n=koen@s55917625.adsl.wanadoo.nl) Quit ("Get Colloquy for iPhone! http://mobile.colloquy.info/")
[17:51:18] <BeagleNewbie> Anyone know why I'm getting "mmap: invalid argument" error when I try to play Big Buck Bunny_720p using omapfbplay with the latest version of Koen Angstrom Demo?
[17:53:50] <BeagleNewbie> anyone here?
[17:57:46] <eFfeM> yas
[17:57:48] <eFfeM> yes
[17:57:57] <eFfeM> but not really an idea. Memory issue ?
[17:58:18] <BeagleNewbie> no idea, but it worked fine before I updated
[17:59:27] * kevinsc_ (n=kevinsc@nat/ti/x-cd91f0a7f13cb0fc) has joined #beagle
[18:01:17] <gcohler> try mplayer perhaps?
[18:01:41] * vincent2 (i=c05b3c0b@gateway/web/ajax/mibbit.com/x-73076131f9635fea) Quit ("http://www.mibbit.com ajax IRC Client")
[18:02:16] <sakoman> I've never had any luck using omapfbplay with an X based image - always get the mmap error. Have no clue why
[18:02:30] * florian (n=fuchs@217.146.132.69) Quit (Remote closed the connection)
[18:09:56] * Flippy1320 (i=80775b0d@gateway/web/ajax/mibbit.com/x-3a9b39988824fa18) has joined #beagle
[18:10:24] <BeagleNewbie> mplayer gives me a problem too
[18:10:48] <Flippy1320> back.... so does the angstrom image come with python installed?
[18:13:04] * bernard_ (n=bernard@mersenne.largestprime.net) has joined #beagle
[18:14:41] * kevinsc_ (n=kevinsc@nat/ti/x-cd91f0a7f13cb0fc) has left #beagle
[18:15:51] * fraz_ (n=fraz@host143186050011.borland.com) has joined #beagle
[18:15:55] * fraz_ (n=fraz@host143186050011.borland.com) has left #beagle
[18:16:06] <Flippy1320> i know when i was unzipping the tar I saw python files but do i need to send a command or something to install the package or something
[18:16:51] <BeagleNewbie> mplayer gives me all kinds of fatal errors
[18:17:37] <eFfeM> Flippy1320: if it is not there just do opkg install python
[18:17:49] <BeagleNewbie> everytime I reflash with a new image, something gets fixed and another thing breaks
[18:18:11] <eFfeM> BeagleNewbie: welcome to the bleeding edge
[18:18:13] * jkridner|work (n=a0321898@nat/ti/x-6c0e6cc7ce0cd530) Quit ("Leaving.")
[18:19:32] * zedstar (n=john@fsf/member/zedstar) has joined #beagle
[18:19:47] <Batko_Marto> i tried bitbaking console image today but it only appears as 3.9 KB archive. Any ideas?
[18:22:19] <Flippy1320> eFfeM does it matter what directory i type the command in or just the home directory be fine?
[18:22:21] <BeagleNewbie> I thought I read somewhere I need to disable the audio?
[18:23:21] <eFfeM> Flippy1320: any place is fine, but you need to be root
[18:23:38] <eFfeM> and maybe do an 'opkg update' first
[18:25:57] * Flippy1320 (i=80775b0d@gateway/web/ajax/mibbit.com/x-3a9b39988824fa18) Quit ("http://www.mibbit.com ajax IRC Client")
[18:26:49] * koen__ (n=koen@s55917625.adsl.wanadoo.nl) has joined #beagle
[18:28:28] <koen> sakoman, BeagleNewbie: X needs an overlay for itself, so you can't use omapfbplay when using X
[18:28:32] * Flippy1320 (i=80775b0d@gateway/web/ajax/mibbit.com/x-26722989e58a1a1b) has joined #beagle
[18:30:11] <BeagleNewbie> by "x" you mean X-Loader?
[18:31:16] * fbb (n=foo@194.197.235.61) has joined #beagle
[18:32:26] * BeagleNewbie (i=d98c6e17@gateway/web/ajax/mibbit.com/x-7720085fe7bcbea4) Quit ("http://www.mibbit.com ajax IRC Client")
[18:32:55] * royerfa (n=fabroy01@fw-tnat.cambridge.arm.com) Quit ("Leaving.")
[18:32:57] * Beagle_Newbie (i=d98c6e17@gateway/web/ajax/mibbit.com/x-ff5745fc392f8b5e) has joined #beagle
[18:33:26] <Beagle_Newbie> Hi Koen, by "X", do you mean X-Loader?
[18:34:35] <sakoman> he means X11
[18:36:46] <Beagle_Newbie> Hmmm
[18:37:23] * robtow (n=rtow@64.62.142.114) has joined #beagle
[18:37:35] <Beagle_Newbie> Does anyone know of a demo image with Firefox and omapfbplay working?
[18:38:46] * tigarto (i=c8181037@gateway/web/ajax/mibbit.com/x-c2351f1320a8613c) has joined #beagle
[18:38:49] <koen> mplayer with -vo xv should get a decent performance as well nowadays
[18:40:37] <Beagle_Newbie> I've been getting fatal errors using mplayer, but I haven't tried with -vo xv
[18:41:17] <lcuk> koen, ive seen you hacking away with xv quite a lot - does the driver support rotation via xrandr?
[18:45:13] <sakoman> koen: slowly narrowing down when e-wm broke for me - build of the 29th works, 1st of this month fails
[18:46:50] <sakoman> damn those first boots are slow!
[18:48:52] <koen> sakoman: the image I built yesterday works
[18:48:55] <eFfeM> hmmm. what do I do with this: ERROR: QA Issue: /home/frans/oe/tmp_angstrom/work/armv7a-angstrom-linux-gnueabi/ddccontrol-0.4.2-r0/install/ddccontrol/usr/share/applications/gddccontrol.desktop: warning: key "Encoding" in group "Desktop Entry" is deprecated
[18:49:15] <koen> fix the .desktop file or ignore it
[18:49:33] * eFfeM does not know anything about .desktop files
[18:50:30] <kulve> lcuk: no xrandr
[18:50:34] <sakoman> koen: my yesterday build fails :-(
[18:50:40] <koen> lcuk: it doesn't, but tomba has a branch that adds rotate support to the kernel framebuffer, I suspect xrandr could use that
[18:51:17] <lcuk> cool, not that it really matters, xv rotated is broken on my 8x0s as well
[18:52:39] <koen> maybe tomba has fixed that :)
[18:52:52] <koen> and kulve is the xv hacker
[18:52:57] <koen> together with zuh
[18:53:04] * koen just uses their work
[18:53:13] <lcuk> as do i :)
[18:55:14] <lcuk> thanks though, when i get an omap3 eventually it will become more importqant
[18:56:19] <kulve> when nokia releases the next tablet, it gets important to get open source running on the n8x0 devices :)
[18:56:52] <lcuk> :) ill start from the ground up
[18:57:51] <kulve> we have tried to get the basic stuff working with ALIP on n80x
[18:57:54] <kulve> n8x0
[18:58:02] <Beagle_Newbie> Keon, how do I scale the image down for mplayer? It says "Image Dimensions too high: 1280x720", "Fatal: cannot initiate video driver..."
[18:58:07] <ds2> ALIP?
[18:58:58] * arne_ (n=arne@p5481AB64.dip0.t-ipconnect.de) has joined #beagle
[18:59:05] * jkridner|work (n=a0321898@nat/ti/x-8b3618ea6f35f0f6) has joined #beagle
[18:59:11] <kulve> ds2: ARM linux platform, linux.onarm.com
[18:59:12] <koen> Beagle_Newbie: you can't scale it down with mplayer if it exceeds your framebuffer dimensions
[18:59:27] <koen> jkridner|work: good morning!
[19:00:22] <jkridner|work> howdy
[19:00:31] <Beagle_Newbie> Koen, so it's impossible to play 1280x720p with the current demo?
[19:00:33] <arne_> good evening;-) Does anybody know if the usb host port is available on the new C2 boards, will there be two independend USB busses available or is it still only one bus?
[19:00:42] <jkridner|work> so is today a good morning?
[19:01:01] <jkridner|work> arne_: 2 independent.
[19:01:08] <ds2> kulve: is that the ARM blessed distro?
[19:01:33] <arne_> great. is it to be expected to get full performance out of the two busses or will there be a bottleneck?
[19:01:45] <jkridner|work> kulve: does linux.onarm.com now have official BeagleBoard support?
[19:02:16] <kulve> ds2: well, not sure about the "distro" (it doesn't have e.g. packaging support (yet)), but yes, ARM is involved
[19:02:23] <kulve> jkridner|work: yes
[19:02:36] <koen> Beagle_Newbie: it's possible, but you need to stop X
[19:02:59] * RogerMon1 (n=a0740758@nat/ti/x-e9dfe098a974647f) Quit (Remote closed the connection)
[19:03:05] <Beagle_Newbie> how do I do that?
[19:03:16] <jkridner|work> kulve: will you give me a http://beagleboard.org/project entry for it, or have you already done that?
[19:03:49] * kevinsc (n=kevinsc@nat/ti/x-d14095c0b16dd48f) has joined #beagle
[19:03:59] <kulve> I'll give it later this week
[19:04:12] * fbb (n=foo@194.197.235.61) has left #beagle
[19:04:23] * kevinsc (n=kevinsc@nat/ti/x-d14095c0b16dd48f) has left #beagle
[19:04:55] <Beagle_Newbie> How do I stop X?
[19:05:32] <orifice_work> killall X
[19:07:28] <BeagleBot> http://beagleboard.org/project/computer-vision/ was edited by blog.hangerhead.com
[19:07:36] <Beagle_Newbie> do I do that from root? It just says "killall: X: no process killed"
[19:08:00] <BeagleBot> http://beagleboard.org/project/computer-vision/ was edited by blog.hangerhead.com
[19:10:48] * gregoiregentil (n=zonbu@166.129.254.75) has joined #beagle
[19:13:00] <Beagle_Newbie> where do I "killall X"?
[19:13:07] <Beagle_Newbie> I suck
[19:14:13] <jkridner|work> has anyone tried the Rev C u-boot release candidates, including the one announce via the e-mail list yesterday? Is anyone seeing problems booting older OE-built kernels?
[19:18:30] <koen> jkridner|work: the kernels I had trouble with are the .27 kernels, OE and angstrom have moved to .28
[19:18:44] <koen> jkridner|work: the one you posted today works nicely on rev C1D
[19:19:38] <Beagle_Newbie> why can't I "killall X"?
[19:20:22] <bkero> Apparently I missed something? I didn't realize there was a C1 and a C2, just a C. Is there a changelog of revisions?
[19:22:35] * Flippy1320 (i=80775b0d@gateway/web/ajax/mibbit.com/x-26722989e58a1a1b) Quit ("http://www.mibbit.com ajax IRC Client")
[19:23:15] <jkridner|work> thanks koen. seems a bit painful to push everyone to 2.6.28, but hopefully the SGX and DSP will be working there soon.
[19:24:21] <koen> jkridner|work: dsp and sgx are working with .28
[19:24:51] * koen had sgx working last weekend and tried dsplink tests yesterday
[19:25:24] <koen> if I get my homework done tomorrow I'll probably have it working on overo with .28 as well
[19:25:40] <koen> the big problem is DMAI needing TI kernels
[19:27:27] * felipec (n=felipec@a91-153-251-222.elisa-laajakaista.fi) has joined #beagle
[19:27:34] <koen> jkridner|work: do you know if the arago patchset will make DMAI build?
[19:27:45] * garren (n=garren@41.246.4.3) Quit ("Ex-Chat")
[19:27:47] <koen> jkridner|work: >120 patches is a bit too much for me to try and sort out :(
[19:28:51] <denix0> koen: I don't think it will build DMAI yet
[19:28:58] <BeagleBot> http://beagleboard.org/resources/ was edited by blog.hangerhead.com
[19:29:10] <denix0> koen: btw, there are almost 200 patches... yeah, little bit too much :)
[19:29:30] <zuh> Beagle_Newbie: Try 'Xorg' instead of 'X' (X is just a link usually)
[19:29:38] <koen> denix0: ouch
[19:29:49] <_don_> koen - TMK there isn't anything already out there that will build DMAI against the latest kernel. we're just now starting to look at it.
[19:29:56] * ceyusa_ (n=ceyusa@cm216016.red83-165.mundo-r.com) Quit ("Ex-Chat")
[19:30:06] <denix0> hey don
[19:30:33] <_don_> hey denys
[19:30:41] <koen> _don_: sadly DMAI also doesn't build against the neuros 2.6.23 kernel
[19:31:27] * koen still has 4 weeks to make something DMAI based work on beagle/overo/evm
[19:33:54] <zuh> lcuk: randr support has been on my todo list, but haven't found the time coupled with motivation to make it happen... Rotation would be one target, another would be eg. 400x240 pixel-double mode on n8x0
[19:34:22] <keesj> dirk2: no, everything is just fine in openocd/jtag land. I added openocd support urjtag to be able to finally test the simple sequence given. it's openocd that is to currently blame
[19:34:28] <koen> isn't that pixel quadruple?
[19:35:30] <zuh> koen: I guess it is :)
[19:36:23] <koen> zuh: I wonder if X could leverage fb rotation, e.g. tomis vrfb code
[19:36:58] <koen> AIUI xf86-video-fbdev tries to ask the kernel to rotate it
[19:37:34] * kenny_x (i=c05b4b1d@gateway/web/ajax/mibbit.com/x-6260eeed79fa6b27) has joined #beagle
[19:39:22] <dirk2> keesj: sorry, seems I miss the context. What is 'openocd support urjtag'? Do you mean the JTAG sequence given by TI works fine, but OpenOCD doesn't do this sequence properly?
[19:40:42] <sakoman> koen: I've noticed that with dss2 the colors are off with psplash and the top left hand blinking cursor during boot. Then once X starts all is well. Do you see this with Beagle or have I screwed something up? :-)
[19:41:04] <koen> sakoman: on dvi or lcd?
[19:41:08] <sakoman> dvi
[19:41:18] <sakoman> cursor is quite cyan
[19:41:30] <koen> maybe a 16/24/32bpp problem
[19:41:40] <sakoman> and the psplash overo logo is orange where it should be blue
[19:41:53] <sakoman> might be - I'll investigatte
[19:41:57] * kenny_x (i=c05b4b1d@gateway/web/ajax/mibbit.com/x-6260eeed79fa6b27) Quit (Client Quit)
[19:42:39] <sakoman> I can't recall noticing this prior to tomba's newest patches yesterday
[19:43:00] <koen> I haven't tried his newest patches yet
[19:43:07] <sakoman> And I could well have screwed soemthing up in moving to the different directory structure/defconfig
[19:43:17] <zuh> koen: What do you mean by leverage? It has software rotation through the shadow framebuffer and if the hw can scan the buffer "sideways" it would be a driver issue to do so IMO...
[19:43:23] <sakoman> too many balls in the air :-)
[19:43:31] <keesj> openocd has a messy implementation of the TAP state changes, and this needs to be fixed Rick sent patches to at least make the problems more visible. I therefore wanted use urjtag to perfoms besic validation of the seqnence(it really should be easy)
[19:45:39] <lcuk> zuh, for xv mode the 400*240 pixel doubling is done in hardware. xv already supports completely variable resolution (liqbase operates on anything from 224*256 upto full 800*480)
[19:46:35] <zuh> lcuk: I was thinking more like games and such using it
[19:46:36] <koen> zuh: hmm, xrandr -o left fails here on beagle
[19:47:30] <lcuk> zuh, you mean adapting sdl etc to work with it
[19:48:21] <lcuk> liqbase has been split into two now with a nice fast core library that lets you open screens and load images and fonts and blit them wherever you want in a nice fullscreen tearfree playground :)
[19:51:24] * docelic (n=docelic@f053224038.adsl.alicedsl.de) has joined #beagle
[19:51:46] <zuh> lcuk: Yeah, SDL could be one customer for it. Any game that is hurt by the large screen and no acceleration would benefit too if it can use a smaller resolution.
[19:52:37] <lcuk> well the hardware supports it - i was talking to ssvb, he has managed to get an XV 800*480 tearfree RGB mode going
[19:52:43] <lcuk> that above all else is ripe for sdl
[19:52:50] * brolin (n=brolin@200.24.16.55) has joined #beagle
[19:53:32] <lcuk> but its a bit late for me, ive created my library and mine works faster anyway (less bandwidth==less cpu time wasted) :)
[19:54:16] * koen would like ssvb to contribute to xf86-video-omapfb
[19:55:49] <lcuk> this was a while ago and its been on his todo for ages
[19:56:25] * arne__ (n=arne@p5481AB64.dip0.t-ipconnect.de) has joined #beagle
[19:56:48] * niladri (i=50c01b64@gateway/web/ajax/mibbit.com/x-115535bd2c3eb336) has joined #beagle
[19:57:05] * geckosenator (n=sean@adsl-68-73-98-69.dsl.dytnoh.sbcglobal.net) Quit ("leaving")
[19:57:38] * mib_2f6xdu (i=633674f8@gateway/web/ajax/mibbit.com/x-c2d527f02d6325b0) has joined #beagle
[19:58:13] <niladri> hi all , i want to learn embedded linux programming is beagle board a good platform to learn , are there tutorials examples etc available?
[19:58:14] <dirk2> keesj: Do you like to communicate this info/knowledge on openOCD list? Sorry, if it's already there and I missed it
[19:58:32] * mib_2f6xdu (i=633674f8@gateway/web/ajax/mibbit.com/x-c2d527f02d6325b0) Quit (Client Quit)
[20:00:38] <keesj> luck I guess that part of the problem is that most SDL apps use RGB internaly. there are some YUV related methods in there
[20:00:39] <prpplague> dirk2: you should have some email re:flyswatter
[20:01:30] <lcuk> yeah keesj, as i said, im not interested in sdl - i was for about a week right back at the start, but it didnt give me what i wanted, so i made my own :$
[20:01:50] * lcuk really didnt set out to though :$
[20:01:52] <dirk2> prpplague: yes, thanks!
[20:02:58] <keesj> lcuk: the point is that you are using a nice trick and many more could benefit from it if it where in SDL (That is what I am trying to say)
[20:03:22] <lcuk> keesj, ive known that - which is why ive made the backend a library :)
[20:03:32] <lcuk> and the front end is plugin widgets
[20:04:05] <lcuk> so i get a nice playground for my apps that i can expand upon, and if someone doesnt want my ui bits they can go and use the lib itself
[20:04:20] <lcuk> it runs really nicely on my x41 in powersave mode
[20:04:29] <lcuk> its very lightweight :)
[20:04:31] <koen> AIUI the overlays can be RGB as well
[20:04:41] * k2340 (n=k2340@lawn-128-61-16-224.lawn.gatech.edu) has joined #beagle
[20:04:43] <koen> so scaling RGB shouldn't be too hard
[20:05:01] <lcuk> it was not scaling that was the issue
[20:05:07] <lcuk> its tearing on the n8x0 devices
[20:05:08] <koen> zuh: since the omap3 has 2 overlays, how hard would it be to make xf86-video-omapfb use both?
[20:05:14] <lcuk> sdl can do pixel doubling already
[20:05:28] <k2340> does the demo 2.6.28 kernel have musb patches in it?
[20:05:41] <koen> k2340: yes
[20:05:50] <koen> everything is in openembedded
[20:06:43] <k2340> koen: interesting, it vomits when i plug in my trendnet usb wifi stick - which works just peachy in the 2.6.27 -r3 with graphics drivers
[20:07:23] <dirk2> keesj: What is 'urjtag'?
[20:07:42] <koen> orjtag.org?
[20:07:47] <koen> ehm
[20:07:49] <koen> urjtag.org
[20:07:56] <k2340> koen: is there a console command to see what drivers are installed?
[20:08:10] <koen> yes
[20:08:11] <koen> lsmod
[20:08:39] <eFfeM> k2340: but that will only list the dynamically loaded drivers, not the one build into the kernel
[20:09:07] <keesj> dirk2: the little brotter of openocd. less debugging more jtag/flasshing/low level thing
[20:09:19] * arne_ (n=arne@p5481AB64.dip0.t-ipconnect.de) Quit (Read error: 113 (No route to host))
[20:10:52] <eFfeM> k2340: /sys/class will also gives you info on the drivers (also the built-in ones)
[20:10:55] <dirk2> keesj: ah, ok, sounds like I will have a look to it
[20:11:13] <koen> eFfeM: I banged up python a bit
[20:11:21] <koen> eFfeM: hopefully coherence will work now
[20:11:21] <eFfeM> i saw it
[20:11:24] <eFfeM> with success ?
[20:11:28] <eFfeM> will try
[20:11:37] <koen> testing in a few minutes
[20:12:29] <eFfeM> i've ported ddccontrol but apparenntly it does not work; could be that my monitor does not support ddc on hdmi though
[20:13:16] <keesj> dirk2: but no embeddedice support so not very intersting for debygging
[20:13:36] <eFfeM> if you decide to give it a try, immediately use dev:/dev/i2c-3 as probing with -p takes ages
[20:14:07] <koen> my dvi screen isn't attached to a beagle atm
[20:14:19] <koen> the pico has no ddc
[20:14:32] <koen> sakoman: does overo have i2c routed to hdmi?
[20:14:40] * gregoiregentil (n=zonbu@166.129.254.75) Quit (Read error: 110 (Connection timed out))
[20:15:12] <eFfeM> there it comes
[20:15:18] * arne__ (n=arne@p5481AB64.dip0.t-ipconnect.de) Quit (Read error: 113 (No route to host))
[20:15:28] <koen> eFfeM: btw, switching from distutils to setuptools seems to have fixed the x86 egg problems
[20:15:39] <eFfeM> ah nice
[20:15:51] <eFfeM> python is still not really my piece of cake
[20:16:14] * eFfeM ponders what's wrong with old fashioned "C" (apart that it is old fashioned)
[20:16:17] <koen> python should only be used for prototyping
[20:16:31] <koen> if you are lazy use vala or something
[20:16:40] * koen likes vala because it compiles to plain C
[20:18:19] <eFfeM> koen, the switch from distutils to setuptools was for twisted ?
[20:18:33] <koen> yes
[20:18:55] <eFfeM> ah, i still sometimes have problems with the various includes
[20:18:57] <koen> no idea what the difference is
[20:19:07] <sakoman> koen: sadly it does not on the current summit. I think I've convinced Gordon to add it on the next revision
[20:19:20] <koen> but I noticed a 'setuptools.pth' not being packaged :)
[20:20:02] <koen> sakoman: I hope it ends up on the ethernet summit (paramount?) as well
[20:20:35] <jkridner|work> koen: have you run test code on the DSP using your codec-engine build?
[20:20:52] <koen> jkridner|work: only the dsplink test apps
[20:21:12] <koen> with mem=80M :/
[20:21:14] * niladri (i=50c01b64@gateway/web/ajax/mibbit.com/x-115535bd2c3eb336) Quit ("http://www.mibbit.com ajax IRC Client")
[20:21:19] <jkridner|work> k.
[20:21:29] * robtow (n=rtow@64.62.142.114) Quit ("Leaving.")
[20:22:18] <sakoman> koen: I hope so too. All I can do is pester :-)
[20:22:21] <jkridner|work> I'm being asked to help in generating a howto wiki page on getting the XDS100 working to debug the DSP on Beagle. I need to make sure I use known-good kernel/link code to bring the DSP out of reset.
[20:22:24] <koen> eFfeM: btw, insane.bbclass checks for archs, so you can't package x86 stuff for arm :)
[20:22:46] <eFfeM> good plan !
[20:23:00] <koen> jkridner|work: recent kernels (dunno if it's in .28, it's in .28-pm for sure) disable the dsp
[20:23:13] <koen> jkridner|work: .27 would leave the dsp on
[20:23:24] <jkridner|work> :-/ not in http://www.angstrom-distribution.org/demo/beagleboard/uImage-2.6.28-r12-beagleboard.bin ?
[20:23:24] <koen> jkridner|work: roger and I noticed that we didn't need lpm :)
[20:23:55] <jkridner|work> I want the how-to to describe a process that others can easily duplicate, but that doesn't put them back too far on old stuff.
[20:24:48] <koen> r12 leaves the dsp on
[20:25:06] <koen> the whole dsp on or off point is moot, since lpm is designed to do that
[20:27:22] <jkridner|work> k. I can 'opkg install dsplink-apps'?
[20:28:20] <k2340> eFfeM: Thanks for the info, I'm exploring it now!
[20:29:42] <Beagle_Newbie> Hi Koen, I tried "killall Xorg", and it had me log in again, and omapfbplay still gives me mmap:invalid argument. Any ideas?
[20:30:33] <jkridner|work> Beagle_Newbie: you can edit /etc/inittab.
[20:30:50] <jkridner|work> change from run-level 5 to run-level 4.
[20:30:56] <koen> jkridner|work: yes, that should work
[20:31:16] <eFfeM> koen installed ptyon-twisted from the feed (8.2.0-r1.1) and python-coherence from local (feed at r0.1, but recipe was at r1.1, so made my own); if I run it I get
[20:31:18] <eFfeM> from twisted.python import usage, text
[20:31:18] <eFfeM> ImportError: No module named twisted.python
[20:31:21] * kevinsc_ (n=kevinsc@nat/ti/x-3002c216377492c8) has joined #beagle
[20:32:22] * dirk2 (n=dirk@p5B0404AE.dip0.t-ipconnect.de) Quit ("Konversation terminated!")
[20:34:37] <koen> the new twisted solved that for me
[20:36:05] <Beagle_Newbie> jkridner, thanks, but why isn't the "edit" command working? I'm at "root@beagleboard"
[20:36:22] <Beagle_Newbie> it says "edit" not found
[20:37:06] <koen> eFfeM: http://lists.linuxtogo.org/pipermail/openembedded-devel/2009-February/007915.html
[20:38:11] <zuh> koen: Unfortunately I seem to have botched that one by putting the portrec to the driver structure, it would need a lot of (though trivial) changes to adapt to having two :/
[20:38:21] <sakoman> Beagle_Newbie: there is no edit, you'll have to try vi :-)
[20:40:25] * docelic (n=docelic@f053224038.adsl.alicedsl.de) Quit ("Leaving")
[20:41:12] * k2340 (n=k2340@lawn-128-61-16-224.lawn.gatech.edu) Quit ("Leaving")
[20:44:54] * kevinsc_ (n=kevinsc@nat/ti/x-3002c216377492c8) Quit (Remote closed the connection)
[20:47:17] <Beagle_Newbie> I remember using vi a long while ago, but it doesn't seem trivial, changes aren't saved automatically, are they?
[20:47:29] * gregoiregentil (n=zonbu@32.177.34.249) has joined #beagle
[20:48:55] * jkridner|work was not expected to be taken so literally.
[20:49:23] * jkridner|work recommends http://free-electrons.com/training/
[20:49:40] <jkridner|work> opkg install nano
[20:50:34] <Beagle_Newbie> what does that do?
[20:54:59] <eFfeM> koen, opkg install python-misc contains platform, that brings us to zope.interface
[20:55:47] <sakoman> A grown-up "Where's Waldo?" Find Hillary, find Yo-Yo Ma:
[20:55:49] <sakoman> http://gigapan.org/viewGigapanFullscreen.php?auth=033ef14483ee899496648c2b4b06233c
[20:57:07] <eFfeM> i found obama is that also ok ?
[20:57:24] <eFfeM> nice thing by the way
[20:58:00] <eFfeM> hillary sits beside bill, blue coat
[20:58:25] <koen> eFfeM: try opkg install python-zopeinterface zope
[20:59:14] <eFfeM> koen, it already says downloading zope for 4 minutes or so
[20:59:46] <eFfeM> not sure what is going on
[21:00:00] <koen> I think yoyoma is sitting next to the cd player
[21:00:03] <eFfeM> oh, it is there
[21:00:14] <eFfeM> who is yoyoma ?
[21:00:28] <koen> the cellist
[21:00:39] <eFfeM> ah ok
[21:00:48] * eFfeM feels dumb
[21:01:06] * florian (n=fuchs@g228129056.adsl.alicedsl.de) has joined #beagle
[21:02:18] * brolin (n=brolin@200.24.16.55) Quit (Client Quit)
[21:03:16] <koen> eFfeM: http://pastebin.com/d1ab0bf8e
[21:03:53] <eFfeM> hm, does not look too bad
[21:04:01] <sakoman> Find the lamp post just above and to the left of the red drape up
[21:04:02] <sakoman> behind Obama. Yo-Yo is just to the left of the lamp.
[21:05:53] <florian> re
[21:05:55] <sakoman> He's taking a picture with his phone. Cello at his feet
[21:05:56] <koen> sakoman: it seems yoyo is taking a pciture :)
[21:06:02] * koen is too slow again
[21:06:04] <koen> florian: wb
[21:06:14] <eFfeM> ah nice
[21:06:26] <eFfeM> i already found a guy in the audience yawning
[21:06:37] <sakoman> koen: how'd you like to have on of those GigaPan's?
[21:06:57] <Beagle_Newbie> jkridner, koen, I successfully edited /etc/inittab (changed default run level from 5 to 4), saved it, killall'ed Xorg, and I still get mmap:invalid argument. Any ideas?
[21:07:04] <eFfeM> how do they make those ?
[21:07:37] <sakoman> http://www.gigapansystems.com/
[21:07:47] <Beagle_Newbie> it's just that one edit in /etc/inittab, correct?
[21:07:50] <koen> sakoman: would be nice
[21:07:57] <koen> sakoman: I'd probably need a car as well
[21:08:37] * cbrake is now known as cbrake_away
[21:09:11] <Beagle_Newbie> what's the easiest, known way for me to get a demo with Firefox and omapfbplay playing 720p?
[21:11:40] <eFfeM> sakoman: amazing and only usd 379; actually i did not notice any stitches, wondering how many pics this is
[21:12:39] <koen> eFfeM: http://www.flickr.com/photos/koenkooi/3254201976/sizes/o/
[21:13:14] <eFfeM> koen what deilvers twisted.internet ?
[21:13:35] <eFfeM> cool koen
[21:13:47] <koen> eFfeM: I did 'opkg install python-modules' as well
[21:14:19] <eFfeM> koen, updating the recipe as well
[21:14:31] <sakoman> eFfeM: http://www.davidbergman.net/blog/
[21:14:38] <koen> root@beagleboard:/usr/lib/python2.6# opkg search $PWD/site-packages/twisted/internet/serialport.py
[21:14:41] <koen> python-twisted-core - 8.2.0-r1.1 - /usr/lib/python2.6/site-packages/twisted/internet/serialport.py
[21:15:20] <eFfeM> koen, i noticed one issue with the flickr and my router, coherence/flickr tries to open a lot of connections at the same time, my router did not like that and qualified it as a hostile action
[21:15:57] <Beagle_Newbie> mplayer -vo vx big_buck.... seems to be doing something now, but there is no video
[21:17:43] * gregoiregentil (n=zonbu@32.177.34.249) Quit (Read error: 110 (Connection timed out))
[21:17:46] <koen> -vo xv only works in x
[21:18:04] * prpplague (n=dave@mail.americanmicrosystems.com) Quit (Remote closed the connection)
[21:18:12] <koen> hence the 'x' in 'xv'
[21:18:23] <eFfeM> sakoman: cool
[21:18:32] * prpplague (n=dave@mail.americanmicrosystems.com) has joined #beagle
[21:18:59] <Beagle_Newbie> its "Starting playback", but "No video", does that mean X is still running?
[21:20:04] * tigarto (i=c8181037@gateway/web/ajax/mibbit.com/x-c2351f1320a8613c) has left #beagle
[21:22:35] <Beagle_Newbie> When I kill X, it has me log back in, then should omapfbplay work?
[21:23:52] <sakoman> koen: what is the reason that RRECOMMENDS_${PN} += "kernel-modules" in an image recipe doesn't work?
[21:24:11] <sakoman> I see you put it in a task recipe or beagle demo image
[21:24:31] <Beagle_Newbie> or, should I just reflash my SD card with an older version of the demo with a working Firefox and omapfbplay?
[21:25:24] * trisooma (n=remko@82.95.240.160) has joined #beagle
[21:25:41] * gregoiregentil (n=zonbu@adsl-71-135-100-147.dsl.pltn13.pacbell.net) has joined #beagle
[21:28:16] <koen> sakoman: image recipes are special, they only get IMAGE_INSTALL
[21:28:30] <koen> sakoman: (not completely true, but that's what it boils down to)
[21:29:00] <eFfeM> koen: http://www.pastebin.ca/1327457 if you want to test some. will do so myself once the tv is free (family is watching star wars)
[21:29:39] * robtow (n=rtow@nat/montavista/x-4d7ca26bf1af22c1) has joined #beagle
[21:29:48] <sakoman> koen: thanks
[21:30:02] <koen> eFfeM: root dir being / or ~/?
[21:31:21] <koen> ImportError: No module named configobj
[21:31:56] <Beagle_Newbie> what video output should I use for mplayer?
[21:32:17] * gcohler (n=gcohler@nat/ti/x-5fa2cd118faf56ef) Quit (Remote closed the connection)
[21:32:51] <koen> Beagle_Newbie: in x xv in consolemode you could use the omafb one in overlay only mode
[21:33:06] <koen> Beagle_Newbie: the mailinglist has messages detailing how to do that
[21:33:24] * ScriptRipper (n=martin@opensuse/member/MartinMohring) Quit (Remote closed the connection)
[21:33:50] * bmxr_laptop (n=chatzill@142.232.128.13) has joined #beagle
[21:35:07] * aleij (n=ad@84.226.254.62) has joined #beagle
[21:35:53] * aleij (n=ad@84.226.254.62) has left #beagle
[21:36:24] <raster> sakoman: still no lve :(
[21:36:30] <raster> love
[21:38:18] <sakoman> raster: bummer! I hope the wall wart episode didn't damage the board
[21:38:26] <Beagle_Newbie> koen, maybe a pointer to those messages? Do you think it might be easier to reflash a version without X?
[21:38:53] <sakoman> raster: so no success with a bootable microSD?
[21:39:09] <Beagle_Newbie> mplayer seems to be doing something, but there's just no video output. What do I give -vo?
[21:40:19] <raster> sakoman: i would expect not as it spews out something
[21:40:39] <Batko_Marto> try -vo omapfb
[21:40:43] <raster> sakoman: and i've nevr known a wall wart blowup to affect the stuff at the other end of it
[21:41:01] <raster> ie just the wart gives out ceasing to power
[21:41:06] <sakoman> raster: haven't had much experience with that on my end
[21:41:11] <raster> (burning up some component inside)
[21:41:29] <sakoman> since plugging 110 into a 240 wart doesn't fry anything
[21:41:42] <raster> but no - i've tried stealing koen's full disk image of a bootable sd - no go
[21:41:48] <raster> i've redone mine like 4 times
[21:41:49] <raster> no go
[21:42:22] <sakoman> It sounds like bad hw :-(
[21:42:28] <raster> hmm i swear i fried somethnig before
[21:42:31] <raster> it was a pc PSU
[21:42:44] <raster> it literally did make a pop and ha some smoke
[21:43:01] <koen> raster: you can partially blow up ICs
[21:43:12] <raster> he pc was fine - once i replacd thepsu
[21:43:13] <muriani> raster: that's fun
[21:43:23] * koen wasted a week on an IC that did the right thing on control pins, but not on the display pins
[21:43:37] <muriani> the company I worked for shipped out a bunch of machines with PSUs that did that after a lightning storm
[21:43:48] <raster> koen: how did u blow it up?
[21:43:53] <muriani> POP*smoke*
[21:44:01] <eFfeM> koen was afk root dir is ~/
[21:44:05] <eFfeM> should have said home dir
[21:44:05] <raster> muriani: it's fun
[21:44:09] <muriani> In schools too!
[21:44:22] <muriani> that freaked a lot of people out :p
[21:44:29] <raster> once i had a machine spontaneously start making grinding nouses and a huge mushroom cloud of blue smoke burst out the back
[21:44:33] <raster> thank god i was at home at the time
[21:44:38] <raster> quickly switched it off
[21:44:39] <sakoman> raster: to check if the microSD is indeed bootable you can put it in a carrier and pop it into your beagle
[21:44:43] <raster> psu went poopsie
[21:44:52] <raster> sakoman: good point
[21:44:53] <raster> :)
[21:45:13] <sakoman> the two machines are close enough that the same image will boot on both
[21:45:21] <eFfeM> koen if it works as expected, I'll try to write up things on the wiki
[21:45:28] <eFfeM> tomorrow or friday
[21:45:33] <sakoman> as long as you have matching uboot/uimage
[21:46:08] * abitos (n=nixgibts@dslb-084-057-178-087.pools.arcor-ip.net) has joined #beagle
[21:46:43] <raster> yup
[21:46:45] <raster> uboot
[21:46:52] <raster> kernel decompress
[21:46:53] <eFfeM> koen only other thing i need is a recipe for the current svn head of coherence, have been trying to make that, but was not yet successful stealing the right code
[21:47:28] <raster> it boots on beagle
[21:47:48] <sakoman> so it sounds like the hw has gone bad :-(
[21:47:58] <sakoman> I'll let gumstix know
[21:48:20] <raster> could it be the microsd reader?
[21:48:21] <koen> eFfeM: http://pastebin.com/m4d39c484
[21:48:30] <raster> let me try somethings
[21:48:39] <sakoman> raster: you could try usb boot
[21:48:39] <raster> either way
[21:48:42] <raster> i get uboot
[21:48:47] <raster> nothngi after kernel decompress
[21:48:55] <raster> its probably paniced or something
[21:49:04] <Batko_Marto> Is there a way that I can get console-image to package more packages in the image? It builds a lot of packages but not many make it in the image
[21:49:06] <raster> havent tried usb yet - dont know the details
[21:49:14] <raster> but that was going to be my next effort
[21:49:18] <sakoman> iirc correctly from last night your microSD was too small for the full image
[21:49:45] <sakoman> I think Nishanth posted some instructions
[21:49:51] <sakoman> don't recall where!
[21:50:23] <raster> well 512m was enough for the kernel fat partition and the rootfs for desktop u had built
[21:51:03] <Beagle_Newbie> can anyone tell me where I can get the last Koen demo without X so that I can run a working browser and omapfbplay?
[21:52:00] <raster> god damn angstrom boots fast on the bb
[21:52:00] <raster> (off sd)
[21:52:47] <raster> ooh no
[21:52:48] <raster> wait
[21:52:50] <raster> no no
[21:52:54] <raster> my bb was booting from flash
[21:52:56] <raster> not sd
[21:53:05] * richardw (n=richardw@nat/ti/x-5c523f7210355081) Quit ("Leaving")
[21:53:15] <raster> its not working off the microsd
[21:53:17] * jkridner|work (n=a0321898@nat/ti/x-8b3618ea6f35f0f6) Quit (Remote closed the connection)
[21:53:22] <raster> GAH
[21:53:22] <koen> eFfeM: I replaced http://www.flickr.com/photos/koenkooi/3254201976/
[21:53:46] * jkridner|work (n=a0321898@nat/ti/x-816acb96b956f7c9) has joined #beagle
[21:54:01] <raster> Texas Instruments X-Loader 1.41
[21:54:01] <raster> Starting on with MMC
[21:54:01] <raster> 40V
[21:54:57] <raster> its using the flash xloader
[21:55:01] <raster> gah
[21:55:03] <raster> why why why
[21:55:24] <koen> raster: it could just plain dislike your sd card
[21:55:29] <sakoman> button?
[21:55:35] <raster> koen: it's possible
[21:55:43] <sakoman> user button that is
[21:55:46] <raster> sakoman: yes
[21:55:56] <raster> ie boot from sd, not flash
[21:56:13] <raster> was holding user button
[21:56:44] <eFfeM> koen, i think most of the warnings are harmless, probably the coherence plugins are not there
[21:56:49] * Eanmig1 (i=Eanmig@67.204.33.94) has joined #beagle
[21:57:09] <raster> but it isnt liking the sd
[21:57:12] * trisooma (n=remko@82.95.240.160) Quit ("Enuff for today")
[21:57:15] <raster> works fine on the desktop
[21:57:15] <eFfeM> i do not see the server yet, but i have a warning on configobj
[21:57:25] <eFfeM> actually an importerror
[21:57:30] <Beagle_Newbie> are there any versions of the Koen demo I can download with working Firefox and omapfbplay?
[21:57:35] <raster> also has been working fine on my gta02 - where it's been living for a while
[21:58:05] <raster> it's also a sandisk so its meant to be a decent brand
[21:58:32] <raster> Disk /dev/sde: 507 MB, 507379712 bytes
[21:58:32] <raster> 255 heads, 63 sectors/track, 61 cylinders
[21:58:40] <raster> /dev/sde1 * 1 5 40131 c W95 FAT32 (LBA)
[21:58:40] <raster> /dev/sde2 6 61 449820 83 Linux
[21:58:43] <raster> looks kosher to me
[21:59:19] <raster> 8:59AM /media/4989-72E2 > /bin/ls -f
[21:59:19] <raster> . .. mlo uImage u-boot.bin
[21:59:27] <raster> (the mounted fat partition)
[21:59:40] <raster> so sorted in directory order... mlo is first
[22:00:56] <eFfeM> koen what did you import to get ConfigObj ? Can't seem to find it in a package
[22:01:03] <eFfeM> (or it is just getting too late)
[22:01:18] * ZeZu (n=null@c-98-227-56-17.hsd1.in.comcast.net) Quit ()
[22:01:29] <eFfeM> koen, nevermind just saw your commit
[22:03:47] <koen> eFfeM: flickr streaming works
[22:04:02] <koen> coherence on beagle, mediastreamer renderer on nokia n810
[22:04:52] <eFfeM> cool!
[22:05:32] <sakoman> raster: I've seen cases before where it looks good to me, but not to the OMAP3 boot loader!
[22:05:51] <raster> sure
[22:05:56] <raster> but... what doesn't look good
[22:05:59] <raster> that is the q
[22:06:16] <sakoman> I never could figure it out
[22:06:49] <sakoman> Every once in a while after much replacing of u-boot and uImage the boot loader decides it doesn't like the format any more
[22:07:16] <sakoman> So I just reformat and reload the images and all is well
[22:07:39] <sakoman> Once I had to redo the partitions too
[22:07:46] <koen> using xload 1.42 helds al little bit
[22:07:55] <koen> helps*
[22:08:07] <sakoman> yup, a whole lot better than before!
[22:08:27] <sakoman> but still those inexplicable blowups
[22:08:47] <sakoman> So now I just bite the bullet and redo the microSD
[22:09:22] <raster> sakoman: i've done it about 4 times now :(
[22:09:40] <raster> (reset the cyls/heads/sectors, repartition, format, put files on etc.)
[22:09:42] <sakoman> raster: the fact that it won't boot on beagle says that it is a generic omap3 thing
[22:09:57] <raster> yeah
[22:09:59] <raster> agreed
[22:10:03] <koen> scruggs: an error in staging_helper usually means you missed a " or } somewhere
[22:10:05] <raster> sorry for the mis-direct
[22:10:58] <raster> ummm
[22:11:00] <scruggs> koen: thanks!
[22:11:07] <raster> no no
[22:11:09] <raster> never mind me
[22:11:15] <raster> my reset wasnt working on bb
[22:11:15] * koen__ (n=koen@s55917625.adsl.wanadoo.nl) Quit ("Get Colloquy for iPhone! http://mobile.colloquy.info/")
[22:11:21] <raster> full power cycle... and
[22:11:34] <raster> Uncompressing Linux..................................................................................................................................................................... done, booting the kernel.
[22:11:34] <raster> Linux version 2.6.28-omap1 (sakoman@otto) (gcc version 4.2.1) #1 Fri Jan 23 13:56:47 PST 2009
[22:11:38] <raster> it boots
[22:11:54] <raster> so the card is fine
[22:11:59] <raster> aargh
[22:12:15] <Beagle_Newbie> anyone know where I can get the newest version of the Koen demo without X?
[22:12:17] <eFfeM> koen, i get python errors: http://pastebin.com/d3c56bc9a
[22:12:26] <raster> ooh bugger it HAS to be ext3?
[22:12:35] <raster> i was happy with ext2
[22:12:36] <raster> :)
[22:12:50] <sakoman> you can modify the bootargs
[22:13:07] * Eanmig (i=Eanmig@69.171.155.93) Quit (Read error: 113 (No route to host))
[22:13:27] <raster> yeah
[22:13:33] <raster> just by default it assumes ext3
[22:13:33] <raster> :)
[22:13:38] <raster> no problem
[22:13:55] <eFfeM> calling it a day
[22:13:59] <eFfeM> koen thanks for the help!
[22:14:17] * eFfeM (n=frans@195-241-226-180.ip.telfort.nl) Quit ("Leaving.")
[22:14:18] <koen> Beagle_Newbie: like I said, if you don't start X omapfbplay works fine, another image isn;t going to help you if you can't get this to work
[22:14:30] <raster> yeah
[22:14:36] <raster> no love on overo
[22:14:51] <raster> ???t???b???$U
[22:14:52] <raster> ???D?????? ??? ??????t???b???$U
[22:14:52] <raster> ..
[22:14:54] <raster> etc,
[22:15:14] <Beagle_Newbie> Koen, thanks, but how do I not start X?
[22:15:16] <raster> i've plugged/unplugged the duaghterboard on/off
[22:15:42] <raster> can't find any other reset etc. buttons other than the 1
[22:15:55] <raster> tried just plugging power in/out
[22:16:41] <scruggs> koen: you were exactly right... I had ${S) in my recipe :) thanks for the tip!
[22:16:45] <raster> it looks like the garble spewed out is the same with microsd in or not
[22:16:46] * bmxr_laptop (n=chatzill@142.232.128.13) Quit (Remote closed the connection)
[22:18:43] <Beagle_Newbie> Anyone know how to not start X?
[22:19:14] * mib_k4yzh7 (i=812ad0b1@gateway/web/ajax/mibbit.com/x-cf49ea1e523dbf64) Quit ("http://www.mibbit.com ajax IRC Client")
[22:20:23] * developer (n=develope@190.84.62.36) has joined #beagle
[22:20:35] <maelcum> sudo rm /usr/bin/X should work :)
[22:21:06] <maelcum> Beagle_Newbie: if you can install sysvconfig you can edit runlevels and things to start pretty easily.
[22:21:25] <maelcum> i know sysvconfig works on debian
[22:22:00] <developer> hello
[22:22:11] <Beagle_Newbie> thanks maelcum, I'll try that
[22:22:23] <developer> how could i change the initial logo when the beagle board boots up
[22:22:55] <maelcum> it involves chicken blood
[22:23:05] <developer> ??
[22:23:10] <maelcum> (not really, but afaik it's a ppm baked into the kernel)
[22:23:26] <maelcum> or whatever the oldschool pixmap format it called
[22:23:48] <developer> ahmm
[22:24:01] <developer> do you mean that i have to recompile the kernel?
[22:24:36] <developer> because somebody told me that i have to recompile U-boot
[22:24:44] <Beagle_Newbie> great, I'm getting omapfb IRQ errors when I boot
[22:25:56] <maelcum> developer: oh, *that* picture
[22:26:06] <maelcum> likely u-boot, yes
[22:26:23] <developer> okay
[22:26:34] <developer> how could i change that image
[22:26:45] <developer> i mean where is that image in the sourcecode
[22:27:44] * emints (n=jack@postoffice.embeddedalley.com) Quit ("Leaving")
[22:29:02] <developer> ???
[22:29:41] <developer> maelcum?
[22:29:53] <maelcum> well, looks like you have to find some compilation howto for u-boot for beagle and find out where the pixmap is and in which format.
[22:31:17] * orifice_work (n=aho@67.71.223.35) Quit (Remote closed the connection)
[22:35:33] <atin_> you should be able to get the u-boot source from sakoman.net
[22:35:37] <atin_> one sec.
[22:35:48] * prpplague (n=dave@mail.americanmicrosystems.com) Quit ("Leaving")
[22:36:04] <bkero> Hehe
[22:36:10] <bkero> Once it stops being a default drupal install
[22:36:12] * guillaum1 (n=gl@AMontsouris-153-1-14-242.w86-212.abo.wanadoo.fr) Quit ("Leaving.")
[22:36:33] * guillaum1 (n=Guillaum@AMontsouris-153-1-14-242.w86-212.abo.wanadoo.fr) has joined #beagle
[22:36:47] <atin_> http://www.sakoman.net/cgi-bin/gitweb.cgi?p=u-boot-omap3.git;a=summary
[22:37:14] <atin_> that's the link for the code - git clone git://gitorious.org/u-boot-omap3/mainline.git and you will have the source
[22:37:38] * atin_ is now known as atin_away
[22:38:04] <atin_away> or did you mean where in the source code ..
[22:46:04] * Beagle_Newbie (i=d98c6e17@gateway/web/ajax/mibbit.com/x-ff5745fc392f8b5e) Quit ("http://www.mibbit.com ajax IRC Client")
[22:52:15] <Batko_Marto> hey guys, I'm trying to make a recipe and when I add gstreamer-plugins-base in the IMAGE_INSTALL it only adds that ipk file and doesn't include any of the plugins it provides. Any idea how can I make it include all the plugins that it has?
[22:54:37] * pH5 (n=ph5@e178219227.adsl.alicedsl.de) Quit ("bye")
[22:58:20] * BThompson (n=BThompso@nat/ti/x-16d5c53038aa0957) Quit ("Trillian (http://www.ceruleanstudios.com")
[23:03:25] * atin_away (n=atin@c-71-232-7-71.hsd1.ma.comcast.net) Quit ()
[23:07:17] * felipec (n=felipec@a91-153-251-222.elisa-laajakaista.fi) Quit ("Leaving")
[23:07:18] * rsalveti (n=salveti@200.184.118.130) Quit (Read error: 104 (Connection reset by peer))
[23:13:19] * brianpspmod (n=zsirc@m490e36d0.tmodns.net) has joined #beagle
[23:13:44] * brianpspmod (n=zsirc@m490e36d0.tmodns.net) has left #beagle
[23:19:47] * fraz__ (n=fraz@host143186050011.borland.com) has joined #beagle
[23:20:23] * gregoiregentil (n=zonbu@adsl-71-135-100-147.dsl.pltn13.pacbell.net) has left #beagle
[23:20:51] * PhastPhrog (n=chatzill@194.193.86.112) has joined #beagle
[23:34:45] * rsalveti (n=salveti@189.70.71.70) has joined #beagle
[23:43:22] * abitos (n=nixgibts@dslb-084-057-178-087.pools.arcor-ip.net) Quit (Read error: 113 (No route to host))
[23:48:47] * ZeZu (n=null@c-98-227-56-17.hsd1.in.comcast.net) has joined #beagle
[23:50:23] * zedstar (n=john@fsf/member/zedstar) Quit (Read error: 110 (Connection timed out))
[23:57:03] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit ()
[23:59:05] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle