• [00:00:34] * notaz_ (n=notaz@78.59.134.74) has left #beagle
  • [00:16:23] * TAK2004 (n=Administ@dslb-088-074-060-023.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [00:27:38] * hli (i=chaton@vig91-2-82-232-97-149.fbx.proxad.net) Quit ("ChatZilla 0.9.84 [Firefox 3.0.4/2008102920]")
  • [01:28:07] <macneib> hello, just testing out my beagleboard-demo-image that built over the weekend and I ran into a little snag with playing an mp3 in xmms. terminal dump is posted @ http://pastebin.com/m12ff044b
  • [01:28:43] <macneib> I know there have been others seeing this just wanted to know more about the issue
  • [01:33:10] * nmq (n=chatzill@129.108.41.159) Quit ("ChatZilla 0.9.84 [Firefox 2.0.0.14/2008040413]")
  • [01:56:25] * robtow (n=rtow@64.62.142.114) has joined #beagle
  • [02:33:58] * rsalveti (n=salveti@189.70.56.133) Quit (Read error: 110 (Connection timed out))
  • [02:34:02] * rsalveti (n=salveti@189.70.63.202) has joined #beagle
  • [02:47:16] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [02:50:52] * macneib (n=macneib@70.29.45.22) Quit (Read error: 110 (Connection timed out))
  • [02:57:48] * kelledin (n=kelledin@cpe-70-123-124-210.tx.res.rr.com) Quit ("Leaving")
  • [03:17:39] * geckosenator (n=sean@c-24-8-193-190.hsd1.co.comcast.net) Quit (Read error: 60 (Operation timed out))
  • [03:22:24] * rsalveti (n=salveti@189.70.63.202) Quit (Read error: 113 (No route to host))
  • [03:22:32] * rsalveti (n=salveti@189.70.63.202) has joined #beagle
  • [03:28:37] * BThompson (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) Quit (Read error: 104 (Connection reset by peer))
  • [03:29:16] <gus2u> /logout
  • [03:29:21] <gus2u> logout
  • [03:29:27] * gus2u (n=user@67-40-46-247.hlrn.qwest.net) has left #beagle
  • [03:32:49] * Beagle9 (n=Beagle9@ip70-187-236-20.dc.dc.cox.net) has joined #beagle
  • [03:38:02] * Beagle9 (n=Beagle9@ip70-187-236-20.dc.dc.cox.net) Quit ()
  • [03:49:51] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [04:30:41] * JuanG (n=Juan@nat/ti/x-e3cd9335790c7e1b) has joined #beagle
  • [04:30:48] * JuanG (n=Juan@nat/ti/x-e3cd9335790c7e1b) has left #beagle
  • [04:31:14] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [04:57:27] * soman (n=somnath@61.16.248.242) has joined #beagle
  • [05:30:27] * mrc3__ (n=ddiaz@189.157.115.100) has joined #beagle
  • [05:30:29] * mrc3_ (n=ddiaz@189.157.115.100) Quit (Read error: 104 (Connection reset by peer))
  • [05:33:11] * jsync (n=jess@59.160.172.220) has joined #beagle
  • [05:37:37] * pundiramit (n=amit@122.166.2.243) has joined #beagle
  • [05:40:35] * RobotGuy (n=robotguy@pool-96-225-210-142.ptldor.fios.verizon.net) Quit (Remote closed the connection)
  • [05:46:37] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [05:53:36] * Viral_Sachde1 (n=Viral_Sa@59.97.1.20) has joined #beagle
  • [06:15:25] * aanishn (n=anish@59.160.172.220) has joined #beagle
  • [06:37:10] * pundiramit (n=amit@122.166.2.243) has left #beagle
  • [06:47:21] * robtow (n=rtow@64.62.142.114) Quit ("Leaving.")
  • [07:39:15] * geckosenator (n=sean@c-24-8-193-190.hsd1.co.comcast.net) has joined #beagle
  • [08:12:51] * RogerMonk (n=a0740758@nat/ti/x-96baae314f0e4900) has joined #beagle
  • [08:16:51] * _AV500_ is now known as AV500
  • [08:31:56] * Beagle0 (n=Beagle0@222.66.141.242) has joined #beagle
  • [08:43:14] <geckosenator> can anyone explain why the beagle board has Vbat at 4.2v when there is not a battery anywhere?
  • [08:47:02] <ds2> how are you measuring it?
  • [08:52:19] * pundiramit (n=amit@122.166.2.243) has joined #beagle
  • [09:00:49] * supo (n=supo@s-inf-pc117.oulu.fi) has joined #beagle
  • [09:15:27] <geckosenator> ds2: looking at the LDO that outputs 4.2v on the schematic
  • [09:15:36] <geckosenator> not really a measurement
  • [09:37:14] * abitos (n=nixgibts@dslb-084-057-158-020.pools.arcor-ip.net) has joined #beagle
  • [09:44:24] <ds2> maybe to fake a full bat?
  • [09:51:06] <Beagle0> does beagle board have flash player on it?
  • [09:52:13] <koen> it only has xload and u-boot on it
  • [09:52:40] <koen> you can install a flash player if you want, like swfdec or gnash
  • [09:52:40] * and-ri (n=ubuntu@pd95b4498.dip0.t-ipconnect.de) has joined #beagle
  • [09:54:58] <and-ri> if i want to install ALSA driver on the beagle. linux kernel 2.6.22.18. which card should i use during the configuration? like ./configure --with-cards=?
  • [09:55:28] <koen> eeew
  • [09:55:30] <koen> 2.6.22.18
  • [09:55:38] <koen> even TI doesn't support that anymore for beagle
  • [09:56:35] <Beagle0> oh, ok, I'll try gnash on it, thanks
  • [10:00:15] <Beagle0> I found that there has no ethernet on board, and it recommand to use a usb dongle, do we have appropriate driver?
  • [10:08:39] <and-ri> well, koen. and how do i use Sound on beagle? at the moment there is no audio driver...so what should i install
  • [10:13:21] <koen> and-ri: sounds works on 2.6.26, 2.6.27 and 2.6.28rc6 for me
  • [10:14:22] <and-ri> do you install any driver before?
  • [10:14:36] <koen> it's builtin to the kernel
  • [10:15:26] <and-ri> perfect, where did you get the kernel?
  • [10:16:48] <koen> from kernel.org and patches from linux-omap ml
  • [10:16:51] <koen> everything is in OE
  • [10:17:46] * guillaum1 (n=gl@AMontsouris-153-1-82-57.w90-2.abo.wanadoo.fr) Quit (Read error: 110 (Connection timed out))
  • [10:21:36] * guillaum1 (n=gl@AMontsouris-153-1-33-212.w90-2.abo.wanadoo.fr) has joined #beagle
  • [10:22:00] * shriram (i=3d5fc3cd@gateway/web/ajax/mibbit.com/x-37c641024a44667b) has joined #beagle
  • [10:26:10] <and-ri> koen: sorry for needle you , but on kernel.org i only found some kernelpatches, but what does they do.... i thought i would get a whole source code
  • [10:26:52] <kulve> git.kernel.org
  • [10:27:01] <kulve> for git stuff
  • [10:35:20] * Beagle0 (n=Beagle0@222.66.141.242) Quit (Read error: 104 (Connection reset by peer))
  • [10:42:09] * tulpe (n=ask@p54AF7F30.dip.t-dialin.net) has joined #beagle
  • [11:16:33] * Beagle1 (n=Beagle1@213.139.154.7) Quit (Read error: 110 (Connection timed out))
  • [11:21:14] * florian_ (n=fuchs@217.146.132.69) has joined #beagle
  • [11:21:54] * florian_ is now known as florian
  • [11:38:32] <and-ri> could i patch the kernel 2.6.22.18 to 2.6.27?
  • [11:39:01] <and-ri> i mean , is it possible to patch them?
  • [11:42:09] <koen> no
  • [11:48:14] <and-ri> ok i think i found the sourcecode link on kernel.org .... the big F after UTC , right?
  • [11:55:14] * RogerMonk|beagle (n=roger@host217-36-23-194.in-addr.btopenworld.com) has joined #beagle
  • [11:59:48] * RogerMonk|beagle (n=roger@host217-36-23-194.in-addr.btopenworld.com) Quit (Read error: 104 (Connection reset by peer))
  • [12:00:41] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) Quit (Read error: 104 (Connection reset by peer))
  • [12:01:01] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) has joined #beagle
  • [12:02:51] * pundiramit (n=amit@122.166.2.243) has left #beagle
  • [12:17:07] * abitos (n=nixgibts@dslb-084-057-158-020.pools.arcor-ip.net) Quit (Nick collision from services.)
  • [12:17:24] * abitos (n=nixgibts@dslb-084-057-196-137.pools.arcor-ip.net) has joined #beagle
  • [12:18:58] * macneib (n=macneib@70.29.46.30) has joined #beagle
  • [12:27:19] * vijay (n=vijay@203.199.213.3) Quit (Connection timed out)
  • [12:31:31] <kulve> and-ri: that's the upstream kernel I guess. But if you are working on omap cpu, you probably want the omap tree using git
  • [12:35:16] * FuL|OUT is now known as fulgas
  • [12:39:09] * john280z (n=jmitchel@static-71-111-254-119.rlghnc.dsl-w.verizon.net) has joined #beagle
  • [12:40:51] <koen> zuh: does omapfb hw support scaling of things larger than the viewport?
  • [12:41:08] <koen> zuh: e.g. downscaling 720p to 1024x768
  • [12:42:42] <kulve> koen: I think it does
  • [12:42:51] <kulve> at least I don't remember anything stating otherwiser
  • [12:43:12] <kulve> there was limits that it doesn't upscale over 8x and it doesn't downscale over 4x
  • [12:48:44] <koen> xf86-video-omapfb disallows it
  • [12:48:53] <koen> since 1280 > 1024
  • [12:57:24] * RogerMon1 (n=a0740758@nat/ti/x-2d65d29b92e16dee) has joined #beagle
  • [12:59:21] * rsalveti (n=salveti@189.70.63.202) Quit (Remote closed the connection)
  • [13:03:20] * RogerMonk (n=a0740758@nat/ti/x-96baae314f0e4900) Quit (Remote closed the connection)
  • [13:06:45] * Openfree (n=df@222.65.143.118) has joined #beagle
  • [13:10:44] <and-ri> where can i get an automatic config file for kernel 2.6.27.7 for beagleboard?
  • [13:11:01] <jkridner> good morning all.
  • [13:11:20] <and-ri> or is it possible to use the old config from 2.6.22.18 kernel
  • [13:11:29] <and-ri> morning
  • [13:11:37] <koen> hey jkridner
  • [13:11:44] * DJWillis (n=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) has joined #beagle
  • [13:12:20] <jkridner> and-ri: can you just run a diff to determine the new options?
  • [13:13:36] <and-ri> sorry i'm a new i this stuff.... how to do that?
  • [13:14:04] <and-ri> ....i'm new in this ....
  • [13:15:52] <and-ri> which file should be compare?
  • [13:19:16] <and-ri> (02:10:43 PM) and-ri: where can i get an automatic config file for kernel 2.6.27.7 for beagleboard?
  • [13:20:26] * soman (n=somnath@61.16.248.242) Quit (Remote closed the connection)
  • [13:20:56] * BThompson (n=BThompso@nat/ti/x-7b64fa669ad7f769) has joined #beagle
  • [13:22:27] <shriram> and-ri: run 'make omap3_beagle_defconfig'
  • [13:23:28] <and-ri> he can not find the omap3_beagle_defconfig
  • [13:24:27] <and-ri> cause he search in the x86 path and i do not know why. the kernel 2.6.22.18 has not such a problem
  • [13:25:22] <and-ri> but i also know that there wasn't any omap3_beagle_defconfig in the kernel 2.6.27.7
  • [13:28:06] * TMM (n=hp@5ED10264.cable.ziggo.nl) has left #beagle
  • [13:28:49] <and-ri> it seems that the option CROSS_COMPILE doesn't work like in the old kernel..... have anybody compiled the 2.6.27.7 kernel for beagleboard? how to do it?
  • [13:34:14] <and-ri> ok
  • [13:35:15] <koen> 13:30 < kulve> and-ri: that's the upstream kernel I guess. But if you are working on omap cpu, you probably want the omap tree using git
  • [13:35:24] <koen> 2.6.27.7 doesn't exist for beagleboard
  • [13:36:19] <and-ri> i have no idea why but i copied the config file from kernel 2.6.22.18 to the same dir in the 2.6.27.7 kernel, then i change to lines in the makefiel. know it get the config, but don't whether it will work
  • [13:36:29] <RogerMon1> hi koen!
  • [13:36:37] * geckosenator (n=sean@c-24-8-193-190.hsd1.co.comcast.net) Quit (Read error: 110 (Connection timed out))
  • [13:36:40] <and-ri> *...but don't know whether
  • [13:36:42] <koen> hey RogerMon1
  • [13:37:11] <RogerMon1> koen - have u used latest beagleboard demo image on 128M board recently?
  • [13:37:11] <koen> and-ri: why are you changing a makefile?
  • [13:37:23] <koen> RogerMon1: yes, it's running nicely on my evm
  • [13:37:32] <RogerMon1> koen - nice!
  • [13:37:38] <RogerMon1> what swapfile size are you using?
  • [13:37:43] * dcordes (n=dcordes@ip-90-187-221-192.web.vodafone.de) has joined #beagle
  • [13:37:50] <koen> RogerMon1: no swapfile on the evm
  • [13:37:56] <RogerMon1> and on beagle?
  • [13:38:14] <dcordes> koen hi. thanks for the patch. msm kernels work fine now.
  • [13:38:31] <dcordes> koen did you decide on the projector?
  • [13:38:41] <and-ri> i looked i the make file from the other kernel....and there were two lines which seems to be interesting .... for the moment it seem a good idea
  • [13:38:46] <and-ri> will see what happened
  • [13:38:49] <koen> RogerMon1: on my 256MB beagle I have 180MB swap, my 128MB beagle is with likewise for linuxRT stuff :)
  • [13:39:23] <dcordes> koen 256MB ram?
  • [13:39:34] <koen> dcordes: I sent a mail to the free-pico-if-you-have-a-cool-demo thing and will wait for an answer before buying a pico :)
  • [13:39:40] <RogerMon1> ok - is firefox very stable on EVM with no swapfile?
  • [13:39:51] <koen> dcordes: yes, I have a revC protoype with 256mb ram
  • [13:40:06] <koen> RogerMon1: no, but it isn't stable on the beagle either
  • [13:40:14] <RogerMon1> ah-ok - good
  • [13:40:31] <RogerMon1> v. unstable for me on beagle
  • [13:40:36] <dcordes> koen nice. well with all your beagle love for oe I guess they owe you at least one pico.
  • [13:41:15] <koen> RogerMon1: is that with FF3.0.1 or FF3.1b1?
  • [13:41:40] <koen> dcordes: 20 picos for a video wall ;)
  • [13:41:51] <and-ri> but the kernel 2.6.27.7 have no arm-audio-device .... ?
  • [13:42:06] <DJWillis> koen: have you seen any issues with the 256mb? We opted for 256mb on the final Pandora boards and somewhat larger NAND but I am still waiting for UPS to get my 256mb board to me.
  • [13:43:00] <dcordes> DJWillis the shipped pandora devices have 128?
  • [13:43:12] <koen> DJWillis: no issues yet
  • [13:43:37] <koen> DJWillis: apart from codec-engine not expecting 256MB on omap3 chips
  • [13:44:04] <DJWillis> koen: what that was expected ;-).
  • [13:44:14] <koen> DJWillis: are the OE patches from pandora online somewhere?
  • [13:44:25] <koen> DJWillis: I keep getting people asking where to find those
  • [13:44:32] <koen> "use the beagle ones" is getting a bit old ;)
  • [13:44:56] <dcordes> DJWillis does the wifi work well on the sold devices?
  • [13:44:57] <DJWillis> dcordes: 1st devices had 128mb, final shipping ones are 256.
  • [13:45:23] <dcordes> ti1251, no?
  • [13:45:36] <RogerMon1> koen - 3.0.1 I think - when did 3.1b1 go in?
  • [13:46:16] <koen> RogerMon1: 3.1b1 is in the feeds, so 'opkg upgrade' will pull it it
  • [13:46:21] <DJWillis> dcordes: no final ones have been shipped, just ones to devs. Yep, 1251 on SD3. Not had a chance to look at it much (not so focused on kernel anymore).
  • [13:46:35] <and-ri> ok koen:"13:30 < kulve> and-ri: that's the upstream kernel I guess. But if you are working on omap cpu, you probably want the omap tree using git" .....honestly my English is not good enough to understand this sentence....may, could you explain?
  • [13:46:40] <koen> RogerMon1: it is slightly more stable on arm, but not built by default because it's a beta
  • [13:46:45] * JuanG (n=Juan@nat/ti/x-ae043750ce585e87) has joined #beagle
  • [13:46:54] * JuanG (n=Juan@nat/ti/x-ae043750ce585e87) has left #beagle
  • [13:46:56] <RogerMon1> koen - ah - ok, thanks
  • [13:48:10] <dcordes> DJWillis all of the recent htc phones also have ti1251.
  • [13:48:16] <DJWillis> koen: the reason I am working on the Pandora again is to sort out said patches and give a push on the ROOTFS, they used to be in my personal GITHub repro but once I have them going on the final boards and cleaned they will all be on the GIT at openpandora.org (and pushed, they WILL be pushed this time).
  • [13:48:35] <dcordes> DJWillis I'm fixing to get it working on the msm7200 based kaiser
  • [13:48:58] <dcordes> DJWillis you know where to find the driver?
  • [13:49:03] <DJWillis> dcordes: yep, I did some work on my Kaiser pre getting a Pandora board with the chip on it. And my G1 for that matter.
  • [13:49:38] <dcordes> ok
  • [13:50:08] <dcordes> what experiences could you gain from the kaiser there
  • [13:50:16] <DJWillis> dcordes: do you want the Andriod GIT from TI with there driver in? git://android.git.kernel.org/platform/system/wlan/ti.git
  • [13:50:32] <DJWillis> dcordes: messing with the wifi chip ;-)
  • [13:51:08] <dcordes> DJWillis thanks I know it. already had an approach putting it for the kais
  • [13:51:14] <dcordes> but no luck
  • [13:51:32] <dcordes> can you detail messing?
  • [13:51:52] * favor (n=favor@118.113.36.204) has joined #beagle
  • [13:51:55] * rsalveti (n=salveti@200.184.118.130) has joined #beagle
  • [13:52:26] <DJWillis> dcordes: we are working to get it going from that open base. There are NDA's around WiFi so I will have to leave it there.
  • [13:52:42] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [13:53:46] <favor> hi. all. I buy beagleboard B5 version board, how to connect my usb mouse and keyboard? I mean i can't connect the mouse and keyboard correctly through usb GTO.
  • [13:54:36] * supo (n=supo@s-inf-pc117.oulu.fi) Quit (Remote closed the connection)
  • [13:55:00] <dcordes> DJWillis wait, on the pandora or htckaiser?
  • [13:55:26] <favor> what's the type of the usb GTO on board?
  • [13:55:27] <dcordes> what is nda about it?
  • [13:55:29] <adj_> favor: you'll need a cable with usb mini-a at the other end plus an usb hub
  • [13:56:41] <favor> how to distinguish mini-a to mini-b? I searched on google, it show me that their color are different. is it?
  • [13:57:24] <jkridner> favor: best solution is to buy an adapter someone has already tested.
  • [13:57:34] <jkridner> colors are not necessarily different.
  • [13:57:47] <jkridner> easier way is to look for an A or B on the connector.
  • [13:57:55] <adj_> favor: pictures of almost every official usb connector: http://www.hervanta.com/stuff/USB-liittimet
  • [13:58:30] * likewise (n=Leon_Woe@atwork-193.r-212.178.107.atwork.nl) has joined #beagle
  • [13:58:36] <favor> the mini-b is black and mini-a is white. I don't sure. and what about the other end of the cable except mini-a?
  • [13:58:43] <jkridner> you can see how difficult they are to tell apart.
  • [13:58:50] <DJWillis> dcordes: around the WiFi on the Pandora. Our aim is to get open drivers going but it's grey at the moment.
  • [13:58:55] <jkridner> please don't try to rely on the color. there is no color convention.
  • [13:59:53] <jkridner> other end of the cable should go to your USB hub or to a standard-A socket where you can connect a USB cable that goes to your USB hub.
  • [14:00:10] <adj_> with mini-a at the other end there are three possibilities for the other end: normale female A, male B and male mini-B
  • [14:00:12] <jkridner> that is, it should connect to the cable that came with your USB hub.
  • [14:00:44] <dcordes> DJWillis ok. motivated by pure selfishness, I was only curious about what you did on the kaiser :)
  • [14:02:03] <favor> yes , i don't think the color is good method to distinguish them.
  • [14:04:22] * sjam (n=sojan_ja@121.247.121.94) has joined #beagle
  • [14:04:32] * robclark (n=robclark@nat/ti/x-fa54232893c31607) has joined #beagle
  • [14:04:37] <DJWillis> dcordes: ahh, well give it a little while and as soon I know where we stand i'll catch you.
  • [14:05:29] <favor> I was confused many days. I don't use the usb OTG of the board.
  • [14:11:43] <favor> on the beagleboard , is it Mini-AB interface?
  • [14:15:13] <adj_> yes it is
  • [14:18:17] * aanishn (n=anish@59.160.172.220) has left #beagle
  • [14:20:46] <favor> I bought some mini usb connection cables , it likes mini A or B, but it don't show me any A or B on the connector, if I bought the wrong type usb?
  • [14:20:51] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [14:24:50] <adj_> what's on the other end of that cable?
  • [14:24:58] <jkridner> most likely, if there is no indication, it is mini-B.
  • [14:25:10] <jkridner> you'll know it is mini-B if you have a standard-A on the other end.
  • [14:25:23] * rangerhomezzz is now known as rangerpb
  • [14:26:26] * prpplague (n=dave@mail.americanmicrosystems.com) has joined #beagle
  • [14:27:10] * RogerMonk (n=a0740758@nat/ti/x-65ba7eaf5c2fc086) has joined #beagle
  • [14:27:58] <favor> yes, maybe. but how to know it's a standard-A on the other end. as far as i know , the big end has standard-A or B types?
  • [14:28:37] <AV500> another day, another mini-A thread....
  • [14:29:53] * rangerpb is now known as rangerhomezzz
  • [14:30:34] <jkridner> oh, what I would give for a Rev C right now.
  • [14:30:48] <koen> $149?
  • [14:30:52] <jkridner> not for any functionality, just a connector that people understand.
  • [14:30:57] <prpplague> $149.99?
  • [14:31:00] <jkridner> :)
  • [14:31:16] <DJWillis> jkridner: how are things looking for the Rev. C's?
  • [14:31:20] <favor> thanks! jkridner. i google the result now. It show me the two types are different.
  • [14:31:23] <koen> jkridner: just put firewire 800 on rev D
  • [14:31:40] <jkridner> lol
  • [14:31:42] <koen> jkridner: you can sell tons of them to people who bought the new macbook :)
  • [14:32:04] <TehUni> haha
  • [14:32:07] * vijay (n=vijay@203.199.213.3) has joined #beagle
  • [14:32:10] <jkridner> I think the next proto of Rev C is due out around the 12th.
  • [14:32:29] <TehUni> koen: if he's looking to sell to mac users, he'll just have to make it shiny.
  • [14:32:35] <jkridner> if it lands "sunny-side-up", do + 8 weeks to being in distribution.
  • [14:32:41] <prpplague> jkridner: fun fun
  • [14:33:43] <prpplague> jkridner: the next rev of the 8050 will be here on friday, so lots of december fun for me as well
  • [14:33:48] <dcordes> DJWillis ok thanks. do you know where the latest kaiser code is? we use the g1 branch now.
  • [14:34:17] * RogerMon1 (n=a0740758@nat/ti/x-2d65d29b92e16dee) Quit (Remote closed the connection)
  • [14:34:19] <koen> TehUni: a brushed alu case for the beagle would be nice
  • [14:34:27] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [14:34:34] <DJWillis> dcordes: I do not, using that G1 code ,rather then hacked and forked stuff, for now
  • [14:34:36] <koen> especially if that case includes a usb hub
  • [14:34:38] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [14:34:48] <khasim> koen: ping
  • [14:34:57] <koen> khasim: pong
  • [14:35:02] <jkridner> hi khasim
  • [14:35:26] <khasim> koen, mans, all: We got Best Booth Award at ARM Tech Symposium in Bangalore
  • [14:35:36] <khasim> I was demonstrating Angstrom + Neon and DLP
  • [14:35:36] <jkridner> dirk2 did some clean-up on u-boot over the weekend. I managed to contribute about 30 minutes to it.
  • [14:35:52] <khasim> It was very well received. Congrats for all your efforts
  • [14:36:09] <khasim> Sorry I cannot attach the award in mail :)
  • [14:36:10] <dcordes> DJWillis you have a clean rebase of the kaiser work in g1 branch?
  • [14:36:17] <khasim> jkridner: Hi
  • [14:37:00] <Crofton> khasim, great!
  • [14:37:44] <koen> khasim: nice :)
  • [14:38:02] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [14:38:38] * Stskeeps (n=chobits@84.238.11.16) Quit (Remote closed the connection)
  • [14:38:41] * Stskeeps (n=chobits@84.238.11.16) has joined #beagle
  • [14:40:15] <koen> khasim: do you have a picture of the booth and/or award?
  • [14:40:35] <koen> khasim: I could post that to angstrom-distribution.org
  • [14:41:24] <khasim> I received a book. Will take a snap of the same
  • [14:42:05] <koen> khasim: you're from india, right?
  • [14:42:19] <dcordes> DJWillis s/clean/working/
  • [14:42:30] <khasim> koen: Yes
  • [14:43:03] <koen> khasim: which of the locales mentioned in http://pastebin.com/d75eb192b would be nice to include in the angstrom demo?
  • [14:46:40] <khasim> koen: locale-base-kn-in_2.6.1-r15.1_armv7a.ipk, locale-base-ta-in_2.6.1-r15.1_armv7a.ipk, locale-base-ml-in_2.6.1-r15.1_armv7a.ipk
  • [14:49:13] <koen> that's kannada, tamil and malayam, right?
  • [14:49:37] <khasim> yes
  • [14:50:04] <khasim> koen: Kannada is used in Bangalore
  • [14:50:31] <khasim> koen: Tamil and Malayalam is used in other two states both are good for FOSS
  • [14:51:40] <koen> added them to IMAGE_LINGUAS, trying a build now
  • [14:52:18] <koen> it doesn't translate apps, but at least people can switch LANG and LC_*
  • [14:52:49] <dcordes> koen is armv6-novfp in the autobuilder?
  • [14:53:02] <koen> dcordes: not yet
  • [14:54:39] * kevinsc (n=kevinsc@nat/ti/x-4400b9d2fc6cf95a) has joined #beagle
  • [14:55:22] * kevinsc (n=kevinsc@nat/ti/x-4400b9d2fc6cf95a) has left #beagle
  • [14:57:11] * kevinsc (n=kevinsc@nat/ti/x-907f7b0b64119d3f) has joined #beagle
  • [14:57:18] * kevinsc (n=kevinsc@nat/ti/x-907f7b0b64119d3f) has left #beagle
  • [15:00:05] * jsync (n=jess@59.160.172.220) has left #beagle
  • [15:00:15] * kevinsc (n=kevinsc@nat/ti/x-9e35254921c9f8f6) has joined #beagle
  • [15:00:17] * kevinsc (n=kevinsc@nat/ti/x-9e35254921c9f8f6) has left #beagle
  • [15:00:45] <sjam> koen: fixed my build problem. Very silly of me, I had the wrong version of XDCTools...a very old one.
  • [15:03:32] * NishanthMenon (n=nMenon@nat/ti/x-63525c9a2ae50ebb) has joined #beagle
  • [15:03:32] * dcordes_ (n=dcordes_@unaffiliated/dcordes) has joined #beagle
  • [15:03:34] * NishanthMenon (n=nMenon@nat/ti/x-63525c9a2ae50ebb) Quit (Client Quit)
  • [15:05:48] <dcordes_> koen, ok. would be nice to have autobuilt images for the armv6-novfp. e.g. for raphael
  • [15:06:29] <koen> dcordes_: http://cgit.openembedded.net/cgit.cgi?url=openembedded/log/
  • [15:08:19] * dcordes (n=dcordes@ip-90-187-221-192.web.vodafone.de) Quit (Remote closed the connection)
  • [15:09:12] <dcordes_> koen, great thanks. will it also make images?
  • [15:09:27] <dcordes_> that website is useful. git.linuxtogo.org seems to be behind
  • [15:10:09] <koen> dcordes_: no, someone will have to send a patch for contrib/angstrom/build-release.sh :)
  • [15:11:43] <dcordes_> it's not so urgent now anyway. but would be nice in future
  • [15:13:29] <koen> dcordes_: the autobuilder runs ~weekly through the list of packages and images
  • [15:16:39] * and-ri (n=ubuntu@pd95b4498.dip0.t-ipconnect.de) Quit (Read error: 110 (Connection timed out))
  • [15:21:59] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [15:35:16] * rangerhomezzz is now known as rangerpb
  • [15:36:52] <koen> khasim: http://scap.linuxtogo.org/files/31a68b73c17b6121f50fb3b9fa3eec4b.png
  • [15:54:14] * kevinsc_ (n=kevinsc@nat/ti/x-d574681d149b51a8) has joined #beagle
  • [15:56:06] <sakoman> koen: I'm finally getting around to trying xf86-video-omapfb
  • [15:56:30] <sakoman> should it "just work" or will I need to hand edit x config files?
  • [15:56:41] <khasim> koen: great to see the local Language
  • [15:57:15] * kevinsc_ (n=kevinsc@nat/ti/x-d574681d149b51a8) has left #beagle
  • [15:57:18] <khasim> Koen: Will you be able to upload an iimage? I can direct all ...
  • [15:57:26] <koen> sakoman: you only need to change 'fbdev' to 'omapfb' in xorg.conf
  • [15:57:27] <khasim> sakoman: hi
  • [15:57:45] <khasim> sakoman: one question on Badblock management on latest u-boot GIT
  • [15:58:03] <sakoman> khasim: plan to try that today
  • [15:58:09] <khasim> sakoman: I was trying BB last week and for some reason it didnt work.
  • [15:58:11] <koen> khasim: I needed a *cough* microsoft *cough* font to get the kannada glyphs, so I can't put it online
  • [15:58:32] <khasim> koen: ok
  • [15:59:00] <koen> khasim: if you know a free font with kannada glyphs please let me know
  • [15:59:21] <khasim> koen: ok, will update you.
  • [15:59:34] <sakoman> khasim: I haven't been using the upstream u-boot due to being busy with a bunch of other stuff
  • [15:59:51] <khasim> sakoman: ok, no probs just thought of checking this out.
  • [15:59:59] <sakoman> Merging my latest changes with the upstream is moving to the top of the to-do list
  • [16:00:09] <khasim> sakoman: I have two other busy days, I will try this later
  • [16:00:25] <sakoman> Just did a pull and there are *many* conflicts :-(
  • [16:00:51] * Viral_Sachde (n=Viral_Sa@59.97.0.164) has joined #beagle
  • [16:00:52] <khasim> :(
  • [16:01:08] <sakoman> Lot of files to review, I'm sure that for most I will just accept the upstream changes, but it will be a few hours of work nonetheless
  • [16:02:03] * Viral_Sachde (n=Viral_Sa@59.97.0.164) has left #beagle
  • [16:05:43] * bazbell (n=a0192809@nat/ti/x-6d26248f4ccc94cd) has joined #beagle
  • [16:16:11] * Viral_Sachde1 (n=Viral_Sa@59.97.1.20) Quit (Read error: 110 (Connection timed out))
  • [16:25:11] * dcordes___ (n=dcordes_@f049188169.adsl.alicedsl.de) has joined #beagle
  • [16:25:31] * favor (n=favor@118.113.36.204) Quit ("Leaving")
  • [16:26:25] * dcordes___ is now known as dcordes
  • [16:35:37] * jbenedetto is now known as jvirdo
  • [16:35:43] * jvirdo is now known as jbenedetto
  • [16:41:55] * kevinsc (n=kevinsc@nat/ti/x-d3a5e809cb7c4ceb) has joined #beagle
  • [16:42:38] * dcordes_ (n=dcordes_@unaffiliated/dcordes) Quit (Read error: 110 (Connection timed out))
  • [16:45:28] <zuh> koen: The restriction was copied over from Xomap, it seemed an unplausible scenario anyway for N8x0. For beagle it's a whole different story of course, so it probably makes sense to remove the check. It should fail gracefully if there's not enough memory anyway, and the capping should be done for the output size.
  • [16:45:38] * robtow (n=rtow@nat/montavista/x-6743ec2cc5f9c2b2) has joined #beagle
  • [17:00:24] * kevinsc (n=kevinsc@nat/ti/x-d3a5e809cb7c4ceb) has left #beagle
  • [17:06:01] <zuh> koen: http://gitweb.pingu.fi/?p=xf86-video-omapfb.git;a=commitdiff;h=8915b <- maybe that'll make you happy?
  • [17:06:17] <zuh> (or sad with hw lockup, who knows ;)
  • [17:07:04] <zuh> There was some ominous comments about dispc downscaling in Xomap, but that might be just the old one...
  • [17:07:09] <koen> I try to test later on
  • [17:07:25] * koen has an es3.0 beagle
  • [17:09:01] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit ()
  • [17:11:58] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [17:19:51] * gregoiregentil (n=zonbu@adsl-71-135-103-88.dsl.pltn13.pacbell.net) has left #beagle
  • [17:19:59] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [17:21:47] * alecrim (n=alecrim@189.2.128.130) has joined #beagle
  • [17:22:52] <koen> zuh: I get "Source image dimensions are too high: 854x460 (maximum is 480x640)
  • [17:22:53] <koen> "
  • [17:22:59] <koen> zuh: but that might be mplayer problems
  • [17:23:03] * gregoiregentil (n=zonbu@adsl-71-135-103-88.dsl.pltn13.pacbell.net) has joined #beagle
  • [17:23:06] <koen> zuh: this on an omap3evm, btw
  • [17:26:34] * uwe__ (n=uwe@dslb-088-064-102-078.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [17:27:44] * dcordes (n=dcordes_@f049188169.adsl.alicedsl.de) Quit ("Verlassend")
  • [17:29:32] * uwe2 (n=uwe@dslb-088-064-095-185.pools.arcor-ip.net) has joined #beagle
  • [17:34:15] * Openfree (n=df@222.65.143.118) Quit (Read error: 110 (Connection timed out))
  • [17:34:17] <kulve> koen: sounds like something else than xf86-video-omapfb
  • [17:34:26] <kulve> i.e. mplayer
  • [17:35:35] * ldesnogu_ (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) has joined #beagle
  • [17:36:16] <koen> yeah
  • [17:38:22] <likewise> koen: hi, what makes a beagle an es3.0 beagle?
  • [17:38:28] <koen> the cpu
  • [17:38:41] <koen> it's kind of like a stepping the x86 world
  • [17:39:29] <koen> likewise: you have an ES2.x beagle
  • [17:39:58] <likewise> ok tnx!
  • [17:40:04] * valhalla (n=valhalla@81-174-21-31.dynamic.ngi.it) has joined #beagle
  • [17:40:14] <koen> likewise: it should print it in dmesg
  • [17:40:30] <likewise> koen: hmm, should get my build working first :-)
  • [17:44:11] * jkridner|work (n=a0321898@nat/ti/x-678094ca28868284) has joined #beagle
  • [17:44:35] * sjam (n=sojan_ja@121.247.121.94) Quit ()
  • [17:47:04] * RogerMonk (n=a0740758@nat/ti/x-65ba7eaf5c2fc086) has left #beagle
  • [17:53:38] * TAK2004 (n=Administ@dslb-088-072-193-233.pools.arcor-ip.net) has joined #beagle
  • [18:01:33] * rsalveti (n=salveti@200.184.118.130) Quit (Read error: 113 (No route to host))
  • [18:01:46] * rsalveti (n=salveti@200.184.118.130) has joined #beagle
  • [18:01:48] * geckosenator (n=sean@c-24-8-193-190.hsd1.co.comcast.net) has joined #beagle
  • [18:19:59] * guillaum1 (n=gl@AMontsouris-153-1-33-212.w90-2.abo.wanadoo.fr) Quit ("Leaving.")
  • [18:20:22] * guillaum1 (n=Guillaum@AMontsouris-153-1-33-212.w90-2.abo.wanadoo.fr) has joined #beagle
  • [18:40:10] * shoragan_ (n=shoragan@sicherheitsschwankung.de) has joined #beagle
  • [18:40:22] * shoragan (n=shoragan@debian/developer/shoragan) Quit (Read error: 104 (Connection reset by peer))
  • [18:42:10] * florian (n=fuchs@217.146.132.69) Quit (Remote closed the connection)
  • [18:44:30] * chelli (n=chelli@p54B8671A.dip.t-dialin.net) has joined #beagle
  • [19:03:23] * jkridner|work (n=a0321898@nat/ti/x-678094ca28868284) Quit ("Leaving.")
  • [19:25:00] * john280z (n=jmitchel@static-71-111-254-119.rlghnc.dsl-w.verizon.net) Quit ("Leaving")
  • [19:28:49] * cmonexaway (n=xy6091@ojk1uz8fgi.adsl.datanet.hu) has joined #beagle
  • [19:29:35] * cmonex (n=xy6091@p0xvxcs9fl.adsl.datanet.hu) Quit (Read error: 110 (Connection timed out))
  • [19:36:17] * likewise (n=Leon_Woe@atwork-193.r-212.178.107.atwork.nl) Quit ("ChatZilla 0.9.84 [Firefox 3.0/2008061015]")
  • [19:37:18] * L84supper (n=L84suppe@c-24-13-84-173.hsd1.il.comcast.net) Quit (Read error: 104 (Connection reset by peer))
  • [19:43:58] * cmonexaway is now known as cmonex
  • [19:53:01] * vijay (n=vijay@203.199.213.3) Quit (Read error: 110 (Connection timed out))
  • [19:54:55] * L84supper (n=L84suppe@c-24-13-84-173.hsd1.il.comcast.net) has joined #beagle
  • [20:07:27] * RobotGuy (n=robotguy@pool-96-225-210-142.ptldor.fios.verizon.net) has joined #Beagle
  • [20:09:28] * shriram (i=3d5fc3cd@gateway/web/ajax/mibbit.com/x-37c641024a44667b) Quit ("http://www.mibbit.com ajax IRC Client")
  • [20:12:26] * jkridner|work (n=a0321898@nat/ti/x-2787934e79c016c8) has joined #beagle
  • [20:22:44] * valhalla (n=valhalla@81-174-21-31.dynamic.ngi.it) Quit ("Leaving")
  • [20:39:19] * shoragan_ (n=shoragan@sicherheitsschwankung.de) Quit (Read error: 131 (Connection reset by peer))
  • [20:39:19] * shoragan__ (n=shoragan@sicherheitsschwankung.de) has joined #beagle
  • [20:51:24] * SpaceAceX (n=rakso@207.35.219.162) has joined #beagle
  • [21:00:23] * Xenion (n=robert@p579FC408.dip.t-dialin.net) has joined #beagle
  • [21:07:16] * dcordes (n=dcordes_@unaffiliated/dcordes) has joined #beagle
  • [21:09:29] <Crofton|work> bother linux-omap_git.bb is crashing during boot ..
  • [21:09:55] <sakoman> koen: do you get complaints about "undefined users" pulse and haldaemon on first boot of demo image?
  • [21:13:42] * robtow1 (n=rtow@nat/montavista/x-a74b695bb579dd2c) has joined #beagle
  • [21:13:59] <Crofton|work> whats the nest way to find a giit commit message from the src rev ...
  • [21:14:10] <Crofton|work> searching for it does not seem to work
  • [21:16:04] * likewise (n=likewise@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [21:16:52] * robtow (n=rtow@nat/montavista/x-6743ec2cc5f9c2b2) Quit (Read error: 110 (Connection timed out))
  • [21:20:52] <koen> sakoman: yes, that's from update-volatiles
  • [21:21:02] <koen> sakoman: I'm not sure why it's doing that
  • [21:21:51] * nabax (n=nabax@89.129.96.71) has joined #beagle
  • [21:22:47] <koen> Crofton|work: I usually just put the rev in a gitweb or cgit
  • [21:23:31] <mru> Crofton|work: git log
  • [21:24:39] * jaziniho (n=jaziniho@host86-162-144-112.range86-162.btcentralplus.com) has joined #beagle
  • [21:36:48] * ghaz`` (i=theghaz@pomm.es) Quit (Read error: 110 (Connection timed out))
  • [21:42:55] <sakoman> mru: now that koen has updated the omapfbplay recipe to build with the new header location I'd like to try it on Overo
  • [21:43:17] <mru> sakoman: yes, is anything stopping you?
  • [21:43:27] <sakoman> Other than your fb patches are there any special kernel requirements
  • [21:43:30] <sakoman> ?
  • [21:44:42] <sakoman> mru: I get a "mmap: Invalid argument" error when I try to run it
  • [21:45:07] <mru> hmm
  • [21:45:18] <mru> not sure what would cause that
  • [21:45:36] <mru> can you strace it and see what it's trying to do?
  • [21:45:55] <sakoman> mru: http://pastebin.com/m14bb50fc
  • [21:46:07] <sakoman> OK, I'll try strace
  • [21:46:28] * uiht (n=opera@schwarzenegger.paivola.fi) has joined #beagle
  • [21:47:36] <sakoman> mru: strace output: http://pastebin.com/m443e1841
  • [21:48:24] <mru> hmm, that 0 looks a bit odd
  • [21:48:38] <mru> what kernel driver are you using?
  • [21:49:30] <sakoman> kernel is stock l-o 2.6.28-rc6 + the mru patches from OE
  • [21:49:48] <mru> is that a configuration that works on beagle?
  • [21:49:51] <mru> are you running X?
  • [21:49:58] <sakoman> yes
  • [21:50:04] <mru> yes to what?
  • [21:50:27] <sakoman> running X with xf86-video-omapfb
  • [21:50:47] <mru> try without X
  • [21:50:52] <mru> clean boot to text console
  • [21:50:59] <sakoman> mru: OK, will do
  • [21:51:02] <sakoman> thanks
  • [21:51:29] <mru> omapfbplay queries the amount of framebuffer memory and tries to mmap it
  • [21:51:42] <mru> apparently it's getting a value of zero back
  • [21:51:45] <mru> which is a bit odd
  • [21:52:01] <mru> the omapfb X driver might have done something naughty
  • [21:54:36] <sakoman> mru: I killed X and get the same result :-(
  • [21:54:41] <mru> reboot
  • [21:54:46] * RogerMonk (n=a0740758@nat/ti/x-2428bf083fd8c3ed) has joined #beagle
  • [21:55:02] <mru> whatever it did, it's likely to be persistent after it exits
  • [21:55:26] <sakoman> mru: I'll switch to a console image and retry
  • [22:02:11] * RobotGuy (n=robotguy@pool-96-225-210-142.ptldor.fios.verizon.net) Quit (Remote closed the connection)
  • [22:05:08] * chelli (n=chelli@debian/developer/tschmidt) Quit (Read error: 104 (Connection reset by peer))
  • [22:16:28] <sakoman> mru: works fine with console image, so it must be an issue with xf86-video-omapfb not playing nice
  • [22:17:28] * ghaz`` (i=theghaz@pomm.es) has joined #beagle
  • [22:17:34] <mru> talk to zuh
  • [22:17:55] <Crofton|work> koen, this boots http://rafb.net/p/RXaj5l90.html
  • [22:18:26] <Crofton|work> now I need to see if I can do useful things with it :)
  • [22:19:37] * BThompson (n=BThompso@nat/ti/x-7b64fa669ad7f769) Quit ("Trillian (http://www.ceruleanstudios.com")
  • [22:20:39] <TehUni> Crofton|work: does that provide any 2d accel?
  • [22:22:39] <Crofton|work> I do not know
  • [22:22:47] <Crofton|work> I'm not a graphics guy
  • [22:23:06] <TehUni> Crofton|work: me either, just hoping for anything to make basic web browsing more usable
  • [22:25:10] * nabax (n=nabax@89.129.96.71) Quit (Remote closed the connection)
  • [22:26:35] * surki (n=surki@gek7.kyla.fi) Quit (Read error: 113 (No route to host))
  • [22:30:44] * guillaum1 (n=Guillaum@AMontsouris-153-1-33-212.w90-2.abo.wanadoo.fr) Quit ("Leaving.")
  • [22:31:11] * guillaum1 (n=gl@AMontsouris-153-1-33-212.w90-2.abo.wanadoo.fr) has joined #beagle
  • [22:35:22] * ssvb (n=ssvb___@212.16.98.110) has joined #beagle
  • [22:38:03] * fulgas is now known as FuL|OUT
  • [22:44:02] * ldesnogu_ (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) Quit ()
  • [22:47:25] * uiht (n=opera@schwarzenegger.paivola.fi) has left #beagle
  • [22:47:36] * uiht (n=opera@schwarzenegger.paivola.fi) has joined #beagle
  • [22:51:57] * likewise (n=likewise@82-171-51-231.ip.telfort.nl) Quit ()
  • [22:54:23] * rangerpb is now known as rangerhomezzz
  • [22:56:19] * Xenion (n=robert@p579FC408.dip.t-dialin.net) Quit ("Verlassend")
  • [23:00:31] * BThompson (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) has joined #beagle
  • [23:00:37] <jkridner|work> I could use some suggestions for this page: http://beagleboard.org/pups
  • [23:05:45] * abitos (n=nixgibts@dslb-084-057-196-137.pools.arcor-ip.net) Quit (Read error: 113 (No route to host))
  • [23:12:30] * dcordes (n=dcordes_@unaffiliated/dcordes) Quit ("Verlassend")
  • [23:12:59] * prpplague (n=dave@mail.americanmicrosystems.com) Quit ("Leaving")
  • [23:16:14] * gregoiregentil (n=zonbu@adsl-71-135-103-88.dsl.pltn13.pacbell.net) has left #beagle
  • [23:22:57] * ssvb (n=ssvb___@212.16.98.110) Quit ("Leaving")
  • [23:33:14] * Beagle1 (n=Beagle1@chello089074181074.chello.pl) has joined #beagle
  • [23:34:58] * Beagle1 (n=Beagle1@chello089074181074.chello.pl) Quit (Client Quit)
  • [23:35:17] * Beagle9 (n=Beagle9@chello089074181074.chello.pl) has joined #beagle
  • [23:35:44] * Beagle9 (n=Beagle9@chello089074181074.chello.pl) Quit (Client Quit)
  • [23:36:05] * vijay (n=vijay@203.199.213.3) has joined #beagle
  • [23:39:53] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) Quit (Read error: 104 (Connection reset by peer))
  • [23:40:13] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) has joined #beagle
  • [23:47:22] * uiht (n=opera@schwarzenegger.paivola.fi) Quit (Read error: 113 (No route to host))
  • [23:47:40] * RogerMonk (n=a0740758@nat/ti/x-2428bf083fd8c3ed) has left #beagle
  • [23:58:01] * SpaceAceX (n=rakso@207.35.219.162) Quit (Read error: 110 (Connection timed out))