• [00:07:37] * robclark (n=robclark@nat/ti/x-22cf5887e59f06b7) Quit ()
  • [00:09:45] * rsalveti (n=salveti@200.184.118.132) Quit (Remote closed the connection)
  • [00:09:54] * rsalveti (n=salveti@200.184.118.132) has joined #beagle
  • [00:11:11] * N208L1 (n=danson@63.127.251.26) Quit (Read error: 110 (Connection timed out))
  • [00:13:05] <Pavlov> should i buy a beagleboard now or are there new ones coming out?
  • [00:13:07] <Pavlov> soon?
  • [00:13:15] <GeneralAntilles> Wait for Rev.C
  • [00:13:25] <Pavlov> any eta?
  • [00:13:25] <GeneralAntilles> Supposedly November last time I checked
  • [00:13:30] <Ikarus> february
  • [00:13:39] <Pavlov> one of those is less good
  • [00:13:53] <GeneralAntilles> Could have been pushed back
  • [00:13:57] <GeneralAntilles> Either way, worth waiting
  • [00:14:08] <GeneralAntilles> Newer OMAP3 silicon and, possibly, twice the RAM.
  • [00:14:16] <Ikarus> GeneralAntilles: not likely on the ram
  • [00:14:21] <calculus> LCD signals, two USB ports
  • [00:14:22] <GeneralAntilles> Working USB EHCI
  • [00:14:23] <Pavlov> twice the ram is worth a lot to me ;/
  • [00:14:36] <Pavlov> but i can order ones now and order more later
  • [00:14:51] <GeneralAntilles> Or that
  • [00:14:54] <GeneralAntilles> They are only $150
  • [00:14:56] <Pavlov> yeah
  • [00:15:06] <Ikarus> Pavlov: if you need to be sure on the ram, the gumstix Overo is availible right now, though to get the same functionality as the Beagle you need to also buy the baseboard (for a total price of $210)
  • [00:15:22] <Ikarus> Overo has 256MB ram and 256MB flash
  • [00:15:27] <Pavlov> hmm
  • [00:16:08] * Pavlov looks for those
  • [00:16:09] <Ikarus> Overo module itself is $150, but only has 3 expansion connectors and SD card, not the handy connectors as on the Beagle
  • [00:17:04] <calculus> also, no DSP or powervr chip on the overo
  • [00:17:13] <Pavlov> ah, hrm
  • [00:17:22] <Ikarus> calculus: errr, the DSP is on it, it's on chip
  • [00:17:22] <calculus> 3503 vs 3530
  • [00:17:26] <Pavlov> the latter might be a deal breaker
  • [00:17:37] <Ikarus> calculus: or did I get that wrong
  • [00:17:45] <GeneralAntilles> 3503 doesn't have a DSP
  • [00:17:50] <Pavlov> i'll dig in to it -- thanks for the options
  • [00:18:13] <calculus> I am trying to find the table from TI, but here is one from linuxdevices, http://www.linuxdevices.com/news/NS3581886124.html
  • [00:18:42] * TAKI (n=Administ@dslb-088-074-045-016.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [00:21:45] <calculus> http://focus.ti.com/general/docs/gencontent.tsp?contentId=36915
  • [00:22:12] <Ikarus> time to push gumstix to make a version with DSP :P (I don't need it right now, but I will want to use it for future code)
  • [00:22:27] <Ikarus> the OMAP's are pin compaitible
  • [00:22:44] <Ikarus> so they can just stick on the more luxurious ones without a board redesign
  • [00:56:26] <Ikarus> right, send gumstix a mail, I'd suggest everyone who also wants them to produce different Overo versions ASAP also does that :)
  • [00:58:52] * JoeyBorn (n=jborn@dsl017-022-247.chi1.dsl.speakeasy.net) has joined #beagle
  • [01:02:38] * rsalveti (n=salveti@200.184.118.132) Quit (Remote closed the connection)
  • [01:12:12] * cbrake is now known as cbrake_away
  • [01:13:16] * jrmuizel (n=jrmuizel@corp-241.mountainview.mozilla.com) Quit ()
  • [01:23:15] * jrmuizel (n=jrmuizel@216.239.45.19) has joined #beagle
  • [01:31:11] * jrmuizel (n=jrmuizel@216.239.45.19) Quit ()
  • [01:39:57] * bullwood42 (n=bullwood@99.171.171.142) has joined #beagle
  • [01:42:18] * emeb (n=ericb@ip72-223-95-46.ph.ph.cox.net) Quit (Remote closed the connection)
  • [01:45:11] * emeb_mac (n=ericb@ip72-223-95-46.ph.ph.cox.net) has joined #beagle
  • [01:50:04] * hex4def6 (n=hex4def6@adsl-68-122-40-18.dsl.pltn13.pacbell.net) has joined #beagle
  • [01:50:06] * Fl1pFl0p (n=Fl1pFl0p@ip68-8-230-62.sd.sd.cox.net) has joined #beagle
  • [01:52:53] * JoeyBorn (n=jborn@dsl017-022-247.chi1.dsl.speakeasy.net) Quit (Read error: 110 (Connection timed out))
  • [01:58:38] * bullwood42 (n=bullwood@99.171.171.142) Quit ("Powered by OE: www.openembedded.org")
  • [02:24:42] * BThompson (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) Quit ("Trillian (http://www.ceruleanstudios.com")
  • [02:27:32] * Fl1pFl0p_ (n=Fl1pFl1p@ip68-8-230-62.sd.sd.cox.net) Quit (Read error: 60 (Operation timed out))
  • [03:08:09] * rsalveti (n=salveti@189.70.63.219) has joined #beagle
  • [03:08:16] * rsalveti (n=salveti@189.70.63.219) Quit (Read error: 104 (Connection reset by peer))
  • [03:15:24] * tulpe (n=ask@p54AF535F.dip.t-dialin.net) Quit (Read error: 60 (Operation timed out))
  • [03:15:39] * tulpe (n=ask@p54AF7A6D.dip.t-dialin.net) has joined #beagle
  • [03:18:27] * denix0 (n=denix@pool-71-255-247-239.washdc.east.verizon.net) has joined #beagle
  • [03:23:20] * jkridner|work (n=a0321898@nat/ti/x-a3e26be28490183b) has joined #beagle
  • [03:30:30] * ralpht (n=ralpht@76-191-208-98.dsl.dynamic.sonic.net) Quit ("Leaving")
  • [03:43:19] * rsalveti (n=salveti@189.65.222.122) has joined #beagle
  • [04:09:06] * nooomem (n=chatzill@ip68-100-201-32.dc.dc.cox.net) has joined #Beagle
  • [04:09:24] <nooomem> yo, just received my beagleboard!
  • [04:09:47] <nooomem> unfortunately, all I have at my disposal right now are a couple of 32 mb sd cards. waiting for my 8 gb card to arrive in the mail
  • [04:10:03] <nooomem> know anything I can test with the 32 mb cards?
  • [04:11:31] * jackster_ (n=chatzill@76-191-209-171.dsl.dynamic.sonic.net) Quit (Read error: 60 (Operation timed out))
  • [04:15:33] <nooomem> I just turned on the board using ac power and hooked it up to a computer using usb
  • [04:16:06] <nooomem> is there some means by which I can open up a terminal to the board using the usb connection?
  • [04:16:11] <nooomem> I don't have serial on my laptop
  • [04:23:59] * rsalveti (n=salveti@189.65.222.122) Quit (Connection timed out)
  • [04:32:31] <kulve> nooomem: get serial (eg. usb-rs232 ). It's impossible to play with embedded hw without serial console
  • [04:32:54] <kulve> practically impossible
  • [04:33:35] * soman (n=somnath@61.16.248.242) has joined #beagle
  • [04:36:04] <nooomem> kulve: ok, will do. there's no way to interact with it from the usb if it's not being used for power?
  • [04:40:01] * nathanm (n=nathan@adsl-69-106-242-112.dsl.pltn13.pacbell.net) Quit (Read error: 113 (No route to host))
  • [04:41:11] <denix0> 8gb sd card is an overkill and there may be problems with boot rom
  • [04:45:55] * bazbell (n=a0192809@nat/ti/x-a236851188978b83) Quit ("Leaving.")
  • [04:49:27] * rsalveti (n=salveti@189.70.63.219) has joined #beagle
  • [04:52:20] <kulve> nooomem: once you have everything set up, you probably have usb-ethernet on the beagle and can log in with ssh. But usually something goes wrong occasionally and you want that serial console
  • [04:52:36] <nooomem> kulve: right, that's what I plan to do actually
  • [04:54:47] * emeb_mac (n=ericb@ip72-223-95-46.ph.ph.cox.net) Quit ()
  • [04:56:07] * Fl1pFl0p (n=Fl1pFl0p@ip68-8-230-62.sd.sd.cox.net) Quit ("Leaving.")
  • [05:01:56] * denix0 (n=denix@pool-71-255-247-239.washdc.east.verizon.net) Quit ("Leaving")
  • [05:02:23] * jrmuizel (n=jrmuizel@ip67-152-86-163.z86-152-67.customer.algx.net) has joined #beagle
  • [05:02:44] * JoeyBorn (n=jborn@h-66-167-220-50.chcgilgm.dynamic.covad.net) has joined #beagle
  • [05:38:38] * jsync (n=jess@59.160.172.220) has joined #beagle
  • [05:57:54] * Stskeeps (n=chobits@84.238.11.16) Quit (Read error: 104 (Connection reset by peer))
  • [06:04:42] * jrmuizel (n=jrmuizel@ip67-152-86-163.z86-152-67.customer.algx.net) Quit ()
  • [06:09:22] * jrmuizel (n=jrmuizel@ip67-152-86-163.z86-152-67.customer.algx.net) has joined #beagle
  • [06:27:30] * jsync (n=jess@59.160.172.220) has left #beagle
  • [06:27:39] * jsync (n=jess@59.160.172.220) has joined #beagle
  • [06:59:14] * jrmuizel (n=jrmuizel@ip67-152-86-163.z86-152-67.customer.algx.net) Quit ()
  • [07:05:54] * nooomem (n=chatzill@ip68-100-201-32.dc.dc.cox.net) Quit (Read error: 104 (Connection reset by peer))
  • [07:09:06] * morris (n=chatzill@125.236.55.43) has joined #beagle
  • [07:50:47] * Beagle6 (n=Beagle6@s-inf-pc117.oulu.fi) has joined #beagle
  • [07:51:00] * Beagle6 is now known as ewerw
  • [08:00:26] <kulve> koen: ping?
  • [08:01:19] <koen> pong
  • [08:02:15] <kulve> http://gitweb.openembedded.net/?p=openembedded.git;a=blob;f=packages/linux/linux-omap2_git.bb;h=dcb8139486cb3990369de02a624147855a356df0;hb=HEAD
  • [08:02:29] <kulve> that is the list of patches the OE applies to beagleboard kernel?
  • [08:05:22] <kulve> quite long
  • [08:10:26] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [08:10:36] * jsync (n=jess@59.160.172.220) Quit (Remote closed the connection)
  • [08:12:58] <koen> kulve: to the .26 kernel
  • [08:13:16] <kulve> hmm.. You don't happen to have a set for 2.6.27-omap1?
  • [08:13:38] <koen> yes
  • [08:13:39] <koen> http://gitweb.openembedded.net/?p=openembedded.git;a=blob;f=packages/linux/linux-omap_git.bb
  • [08:13:57] <kulve> ah, looks better :)
  • [08:19:38] * koen needs to add the scaling patch to both
  • [08:20:14] <kulve> koen: where do I find the patches from..?
  • [08:21:36] <koen> in the linux-omap-git/ dir (for .26) and linux-omap/ (for .27)
  • [08:21:56] <koen> e.g. http://gitweb.openembedded.net/?p=openembedded.git;a=tree;f=packages/linux/linux-omap;h=481da01de63e32d07cd8f805674ae6c56f9aabf3;hb=HEAD
  • [08:22:28] <kulve> ah, I checked just blindly under beagleboard and didn't realize the patches are omap3 specific, not beagleboard..
  • [08:22:31] <kulve> thanks
  • [08:24:09] * morris (n=chatzill@125.236.55.43) has left #beagle
  • [08:35:51] <koen> kulve: could you send your patch for scaling upstream? (linux-fbdev-devel?)
  • [08:37:34] <kulve> I was planning to send it somewhere once somebody else would test that it works for him too.. And I tested only against a bit older kernel, so I'm testing against newer kernel later today
  • [08:38:00] <kulve> I also implemented the downsampling but it causes immediate irq error loop..
  • [08:39:31] <kulve> does linux-fbdev have their own kernel tree somewhere..?
  • [08:40:10] <kulve> i.e. should I test against their tree, or is the linux-omap ok?
  • [08:55:50] * wiking (n=wiking@213.47.71.51) has joined #beagle
  • [09:00:11] * guillaum1 (n=gl@AMontsouris-153-1-79-42.w90-2.abo.wanadoo.fr) Quit ("Leaving.")
  • [09:00:46] * guillaum1 (n=gzba4143@AMontsouris-153-1-79-42.w90-2.abo.wanadoo.fr) has joined #beagle
  • [09:07:29] * abitos (n=nixgibts@dslb-084-057-150-029.pools.arcor-ip.net) has joined #beagle
  • [09:09:33] * jsync (n=jess@59.160.172.220) has joined #beagle
  • [09:15:48] * vu3rdd (i=7aa7fed7@gateway/web/ajax/mibbit.com/x-53bfc5eecb2f4a57) has joined #beagle
  • [09:17:33] <kulve> felipec: do you have the dspbridge working with the 2.6.27-omap1?
  • [09:17:35] <kulve> I get:
  • [09:17:36] <kulve> # ./ping.out
  • [09:17:36] <kulve> DSP device detected !!
  • [09:17:36] <kulve> DSPNode_Allocate failed: 0x8000801d
  • [09:20:04] <koen> kulve: did you reserve 14MB for dma?
  • [09:20:12] <kulve> yes
  • [09:20:29] <kulve> and booted with:
  • [09:20:29] <kulve> Kernel command line: console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootdelay=1 video=omapfb:vram:2M,vram:4M
  • [09:22:32] <AV500> no need for a mem=xxx?
  • [09:25:15] <kulve> testing
  • [09:26:10] <kulve> same thing with mem=96M
  • [09:29:44] * vu3rdd (i=7aa7fed7@gateway/web/ajax/mibbit.com/x-53bfc5eecb2f4a57) has left #beagle
  • [09:34:06] <AV500> I have not used bridge yet...
  • [09:36:08] <kulve> strace output of the ping:
  • [09:36:09] <kulve> http://pastebin.com/mfee2025
  • [09:36:25] <kulve> line 31 seems odd
  • [09:43:54] * kozak|work (i=cbc8c84a@gateway/web/ajax/mibbit.com/x-fa31489c193cba20) has joined #beagle
  • [09:46:13] <AV500> yes
  • [09:46:32] <AV500> what is ioctl 18?
  • [09:46:36] <AV500> what is ioctl 0x18?
  • [09:49:19] <kulve> http://4869037.web.fc2.com/tidspbridge-20081021.tgz
  • [09:49:22] <kulve> there's the patches..
  • [09:58:03] <ldesnogu_> 0x18 seems to be CMD_NODE_ALLOCATE_OFFSET
  • [09:58:12] <ldesnogu_> that would be the allocate command
  • [09:58:22] <ldesnogu_> which the error msg below seems to confirm
  • [10:05:21] * JimDonovan (n=jimd@c-66-30-221-249.hsd1.ma.comcast.net) has joined #beagle
  • [10:07:10] <felipec> kulve: how are you loading the DSP base image?
  • [10:09:48] * florian__ (n=fuchs@217.146.132.69) has joined #beagle
  • [10:10:09] * florian__ is now known as florian
  • [10:14:53] <felipec> kulve: if you use the baseimage.dof from tiopenmax-0.3 then you need to load the DSP node
  • [10:15:28] <felipec> /dspbridge/dynreg.out -r pingdyn_3430.dll64P
  • [10:16:07] <felipec> if you use ddspbase_tioomap3430.dof64P then you don't need to do that
  • [10:18:25] <felipec> there's no need for mem=xxx with the latest dsp-bridge patches
  • [10:38:32] * Crofton (n=balister@c-68-50-43-56.hsd1.va.comcast.net) has joined #beagle
  • [10:38:55] <kulve> felipec: I tried both, but without the dynreq.out
  • [10:44:17] <Crofton> day 3 with unders 6 hours sleep ...
  • [10:45:58] <kulve> felipec: the ping works after that \o/
  • [10:45:59] <florian> hi Crofton
  • [10:46:05] <Crofton> gm
  • [10:46:08] <kulve> with the (baseimage.dof)
  • [10:46:09] <florian> Crofton: work? kids?
  • [10:46:14] <Crofton> conference
  • [10:46:19] <Crofton> too many people to talk too
  • [10:46:21] <florian> fun!
  • [10:46:24] <florian> :-)
  • [10:46:30] <Crofton> too many people buying beer :)
  • [10:46:44] <Crofton> stupid 7 am meeting
  • [10:47:56] <koen> Crofton: did you demo go ok?
  • [10:48:03] <Crofton> yes
  • [10:48:07] <Crofton> I t went well
  • [10:48:23] <Crofton> the room had more people (or about the same) as the morning demo
  • [10:48:29] <Crofton> people asked questions
  • [10:48:39] <Crofton> afterwards they clustered arounf the beagle
  • [10:48:45] <Crofton> and asked for slides
  • [10:49:00] <Crofton> and talked to me afterwards
  • [10:49:58] * koen in contemplating on using thumb for cache starved CPUs
  • [10:50:21] <felipec> kulve: afaik the ddspbase_tioomap3430.dof64P already has the ping dsp node statically, but the baseimage.dof doesn't, so you need to load it dynamically
  • [10:50:50] <felipec> somebody should add that to the wiki :)
  • [10:52:09] * soman (n=somnath@61.16.248.242) Quit (Read error: 113 (No route to host))
  • [10:56:10] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [10:56:53] <felipec> bbl
  • [10:56:54] * felipec (n=felipec@a88-113-6-167.elisa-laajakaista.fi) Quit ("Leaving")
  • [11:05:27] * soman (n=somnath@61.16.248.242) has joined #beagle
  • [11:06:37] <kulve> felipe shouldn't be allowed to bbl..
  • [11:24:14] * fagius (n=fagius@65.213.68.244) has joined #beagle
  • [11:24:24] <Ikarus> koen: does work, but can cause other headaches
  • [11:24:41] * fagius (n=fagius@65.213.68.244) Quit (Client Quit)
  • [11:24:59] <Ikarus> koen: I haven't seen anyone dare production use thumb code unless codesize or the width of the bus where the issue
  • [11:29:59] * JimDonova1 (n=jimd@c-66-30-221-249.hsd1.ma.comcast.net) has joined #beagle
  • [11:31:03] * RogerMonk (n=a0740758@nat/ti/x-b6efb5b3ebdd8600) has joined #beagle
  • [11:31:51] * fagius (n=fagius@206.83.81.178.ptr.us.xo.net) has joined #beagle
  • [11:36:02] * JimDonovan (n=jimd@c-66-30-221-249.hsd1.ma.comcast.net) Quit ("Leaving.")
  • [11:37:29] * JimDonovan (n=jimd@c-66-30-221-249.hsd1.ma.comcast.net) has joined #beagle
  • [11:38:48] <jsync> koen: i have few questions regarding the power management patches available in the openembedded git for OMAP
  • [11:39:07] <jsync> are those patches pulled from linux-omap-pm.git in kernel.org ?
  • [11:49:42] * JimDonova1 (n=jimd@c-66-30-221-249.hsd1.ma.comcast.net) has left #beagle
  • [11:53:14] * fagius (n=fagius@206.83.81.178.ptr.us.xo.net) Quit (Read error: 110 (Connection timed out))
  • [12:00:43] * JoeyBorn (n=jborn@h-66-167-220-50.chcgilgm.dynamic.covad.net) Quit (Read error: 104 (Connection reset by peer))
  • [12:06:55] * trickie (n=trickie@hgaulton.xs4all.nl) Quit (Read error: 110 (Connection timed out))
  • [12:06:57] * cbrake_away is now known as cbrake
  • [12:08:12] * trickie (n=trickie@hgaulton.xs4all.nl) has joined #beagle
  • [12:14:06] * Openfree (n=df@222.65.132.11) has joined #beagle
  • [12:15:42] * Robot_kolej (n=robot@robot.kolej.mff.cuni.cz) has joined #beagle
  • [12:16:06] * gcohler (n=gcohler@nat/ti/x-68166d69cc875731) has joined #beagle
  • [12:16:41] <Robot_kolej> hey
  • [12:17:10] <Robot_kolej> has anyone tried the 2008q3 toolchain ?
  • [12:17:30] <kulve> probably not because it has broken NEON (still)
  • [12:17:39] * JoeyBorn (n=jborn@h-66-167-69-147.chcgilgm.dynamic.covad.net) has joined #beagle
  • [12:17:49] <LoneMeow> I tested it quickly, ICE on something trivial, so didn't bother to try further
  • [12:18:02] <Robot_kolej> so the 2007q3 is still the best choice ?
  • [12:18:11] <kulve> yes
  • [12:18:12] <LoneMeow> (something trivial = something in plain C, no -ftree-vectorize, no NEON)
  • [12:18:31] <Robot_kolej> thanks a lot ;)
  • [12:18:31] * robclark (n=robclark@nat/ti/x-806aa692cbd123e7) has joined #beagle
  • [12:18:50] <LoneMeow> a bit less broken than 2008q1 but not very much less broken, if memory serves
  • [12:19:07] <LoneMeow> 2007q3 still seems to be the least broken one (it's broken too, but not unusable-broken)
  • [12:19:30] * BThompson (n=BThompso@nat/ti/x-541edf3653610651) has joined #beagle
  • [12:20:28] * kevinsc (n=kevinsc@nat/ti/x-b32a34a683b265e2) has joined #beagle
  • [12:21:52] * jkridner|work (n=a0321898@nat/ti/x-a3e26be28490183b) Quit (Remote closed the connection)
  • [12:24:44] * jkridner|work (n=a0321898@nat/ti/x-10144bcc1874bc52) has joined #beagle
  • [12:27:38] * zedstar (n=john@fsf/member/zedstar) has joined #beagle
  • [12:30:52] * odikrause (n=banden@neo-y1a.ehv.campus.philips.com) has joined #beagle
  • [12:30:58] <odikrause> hi guys
  • [12:31:23] * Robot_kolej (n=robot@robot.kolej.mff.cuni.cz) has left #beagle
  • [12:32:40] <odikrause> question. the dvi does not give any signal. can I test somehow to see if something is broken? serial connection works, i can boot without problems
  • [12:34:09] <pbrook> The demo image should display something on the DVI and s-video connectors.
  • [12:34:52] <odikrause> should. I know. it worked before, but suddenly its not giving a signal
  • [12:34:57] <pbrook> You should probably use a monitor rather than a TV. Digital TVs can be fairly picky about what modes they accept.
  • [12:35:22] <odikrause> the thing that changed is the powerplug -> from 5v to 4.5v
  • [12:35:32] <pbrook> If you reflashed u-boot, you probably replaced it with one that doesn't have the demo code.
  • [12:35:42] <pbrook> Oh, well, that's probably it then.
  • [12:35:52] <odikrause> however, also with just usb powering it doesnt show anything
  • [12:36:12] <odikrause> i didnt replace uboot, i just saved the boot sequence with setenv
  • [12:36:32] <odikrause> and I tried two monitors
  • [12:36:57] <pbrook> I expect it stops displaying the images once you start booting something else.
  • [12:37:27] <odikrause> well with the angstrom linux, it even used to show the xwelcomescreen
  • [12:37:35] * kevinsc (n=kevinsc@nat/ti/x-b32a34a683b265e2) has left #beagle
  • [12:37:51] <odikrause> and during booting, there is also no output to the dvi
  • [12:38:19] <odikrause> can I somehow measure whether there is output at the cable?
  • [12:43:32] * Crofton (n=balister@c-68-50-43-56.hsd1.va.comcast.net) Quit ("Leaving")
  • [12:44:59] * igor321 (n=igor@93-138-170-47.adsl.net.t-com.hr) has joined #beagle
  • [12:45:34] * igor321 (n=igor@93-138-170-47.adsl.net.t-com.hr) has left #beagle
  • [12:55:17] * gcohler (n=gcohler@nat/ti/x-68166d69cc875731) Quit (Remote closed the connection)
  • [12:56:46] * felipec (i=c0647cda@gateway/web/ajax/mibbit.com/x-2da347252f4f8ad1) has joined #beagle
  • [12:58:34] <kulve> felipec: any idea why I get this while trying to use omx_mpeg4dec:
  • [12:58:35] <kulve> ****************LCML ERROR : DSP ************************
  • [12:58:35] <kulve> Error: DSP Manager Open : Err Num = 80008008
  • [12:58:35] <kulve> ****************LCML ERROR : DSP ************************
  • [12:59:12] <kulve> what base image should I give to bridgedriver.ko when loading it? What the dynreg actually do?
  • [13:00:53] <felipec> kulve: the baseimage from tiopenmax-0.3 has all the multimedia stuff, that's what you need to use if you want mpeg4dec
  • [13:01:40] <felipec> kulve: dynreg is a dynamic dsp node loader, it's needed if the baseimage doesn't have registered the node you want to use
  • [13:02:48] <kulve> hmm..
  • [13:03:00] <kulve> so I don't need to give anything to modprobe if I use dynreg later..?
  • [13:03:49] <felipec> kulve: you need an OS running on the DSP before you can register nodes with dynreg
  • [13:04:55] <kulve> NODE:DSPNode_Allocate: Failed to get Node UUID properties
  • [13:04:57] <felipec> kulve: there's another tool, cexec, in order to load base images (the OS), in the DSP
  • [13:04:57] <kulve> now I get that..
  • [13:06:05] <felipec> kulve: you don't need to use cexec if you use the base image property in the kernel module
  • [13:06:37] <kulve> ok
  • [13:07:12] <kulve> http://pastebin.com/m3038de7f
  • [13:07:44] <felipec> kulve: each node has a uuid, so it seems the node is not registered
  • [13:08:04] <felipec> kulve: did you use the baseimage from tiopenmax-0.3?
  • [13:08:13] <kulve> I think so
  • [13:11:04] <kulve> yeah, it's from there
  • [13:11:17] <kulve> at least the md5sum matches
  • [13:11:42] <kulve> part of the /lib/dsp is from there and part is from dspbridge_binaries.tar.gz
  • [13:11:56] <felipec> kulve: and do you have /lib/dsp/mp4vdec_sn.dll64P ?
  • [13:12:23] <felipec> kulve: I think it's safer to use the /lib/dsp from tiopenmax
  • [13:13:16] * soman (n=somnath@61.16.248.242) Quit (Remote closed the connection)
  • [13:15:03] <kulve> I've untared them both to /lib/dsp but they don't have any files in commong so I have all the files from tiopenmax in /lib/ds
  • [13:15:06] <kulve> p
  • [13:15:13] * JoeyBorn (n=jborn@h-66-167-69-147.chcgilgm.dynamic.covad.net) Quit ("open.neurostechnology.com")
  • [13:16:40] * bazbell (n=a0192809@nat/ti/x-3894dd48c6120a63) has joined #beagle
  • [13:17:17] <kulve> now I don't even get the ping working..
  • [13:18:43] <felipec> kulve: ok, can you show me step by step how are you trying the ping test?
  • [13:19:03] <kulve> in a sec. I'll try it one more time
  • [13:19:14] * RogerMon1 (n=a0740758@nat/ti/x-fd4dee6211bee096) has joined #beagle
  • [13:21:43] <kulve> http://pastebin.com/d14ef5f3a
  • [13:22:47] <felipec> kulve: ./dynreg.out -r ddspbase_tiomap3430.dof64P
  • [13:23:11] <felipec> don't do that
  • [13:23:36] <felipec> .dof files are base images, they should be loaded either by cexec, or by the kernel module
  • [13:23:47] * prpplague (n=dave@mail.americanmicrosystems.com) has joined #beagle
  • [13:24:00] <felipec> .dll files are the dynamic nodes
  • [13:24:26] <kulve> it's good that it doesn't complain when I give garbage to it :)
  • [13:24:32] <kulve> if I give non-existant file, it segfaults
  • [13:24:45] <felipec> kulve: yeah, TI quality
  • [13:25:30] <felipec> those files could be easily rewritten though
  • [13:26:55] * RogerMonk (n=a0740758@nat/ti/x-b6efb5b3ebdd8600) Quit (Remote closed the connection)
  • [13:26:55] <kulve> http://pastebin.com/m29e302ab
  • [13:26:58] <kulve> same thing
  • [13:27:28] <kulve> and now you say that I shouldn't load the ping node either..
  • [13:28:03] <felipec> kulve: you don't need to, but shouldn't affect
  • [13:28:27] <felipec> kulve: whenever I get one of those errors I usually need to reload the kernel module
  • [13:29:09] <felipec> but this error 8000800c is different than the previous one: 80008008, let me see what it means
  • [13:31:01] <felipec> A memory allocation failure occurred.
  • [13:31:15] <kulve> reloading the kernel module lead to:
  • [13:31:16] <kulve> ***** DSPMMU FAULT ***** IRQStatus 0x2
  • [13:31:55] <felipec> kulve: is that the full error message?
  • [13:32:36] <kulve> no, I got the full stack trace from kernel
  • [13:33:56] <felipec> whoa, I've never seen that
  • [13:34:13] <felipec> let me try 2.6.27-omap1
  • [13:34:38] <kulve> I have 2.6.27-omap1 + bridge patches + OE patches
  • [13:35:28] <kulve> it would be nice to know why I get that 8000800c because it shouldn't be a memory allocation problem. Unless I have configured something wrong
  • [13:36:04] <felipec> kulve: if you had dsp errors before it's possible that the dsp os got screwed
  • [13:36:38] <kulve> but I get the 8000800c everytime I try to launch gst-launch after a reboot
  • [13:36:51] <kulve> and I don't have about anything else running there
  • [13:37:09] <kulve> udevd, nothing else
  • [13:37:40] <felipec> ah, you mean right after loading the module with the tiopenmax base image?
  • [13:38:00] <kulve> yes
  • [13:38:13] <kulve> the bridgedriver is loaded on boot
  • [13:38:13] <felipec> if that's the case then maybe a gst log would help
  • [13:38:27] <felipec> export GST_DEBUG=omx:5
  • [13:39:09] <kulve> http://pastebin.com/d65f75dfa
  • [13:39:51] * jsync (n=jess@59.160.172.220) Quit (Read error: 60 (Operation timed out))
  • [13:40:37] <felipec> kulve: I'm not sure the dsp node supports that resolution at this moment
  • [13:40:49] <kulve> what videos have you tried?
  • [13:41:11] <kulve> that was the BBB
  • [13:41:24] <Ikarus> whooo:
  • [13:41:24] <Ikarus> Here at Gumstix, we do plan to have an OMAP 3530-based Overo motherboard.
  • [13:41:24] <Ikarus> Further information to come when the product is announced, likely in 1-3
  • [13:41:24] <Ikarus> months.
  • [13:41:38] <felipec> D1 is the highest resolution it should support
  • [13:41:49] <kulve> what's D1?
  • [13:42:05] <felipec> kulve: PAL, NTSC
  • [13:42:05] <BThompson> 720x480
  • [13:42:48] <kulve> I have VGA videos too, but they give the same result, iirc
  • [13:44:14] <kulve> ok, now I had something completely different..
  • [13:44:17] * emeb (n=ericb@ip72-223-95-46.ph.ph.cox.net) has joined #beagle
  • [13:45:32] <kulve> http://pastebin.com/d3b00ce45
  • [13:49:09] <felipec> hmm, it seems the mp4dec dsp node still hasn't been updated
  • [13:49:35] <felipec> I think TI is going to release tiopenmax-0.4 soon
  • [13:49:51] <felipec> mrc3_: ping
  • [13:51:10] * JimDonovan (n=jimd@c-66-30-221-249.hsd1.ma.comcast.net) Quit (Read error: 60 (Operation timed out))
  • [13:52:04] <felipec> kulve: do you have access to TI's official releases?
  • [13:52:52] <kulve> yes
  • [13:55:33] <felipec> kulve: try replacing ringio.dll64P and mp4vdec_sn.dll64P in /lib/dsp with the official ones
  • [13:56:12] <kulve> just those two, or all..?
  • [13:56:53] <felipec> kulve: I would try only those two first
  • [13:59:41] <kulve> http://pastebin.com/d2ea30f80
  • [13:59:42] <kulve> oijs
  • [13:59:44] <kulve> poks
  • [13:59:57] * JuanG (n=Juan@nat/ti/x-e73b08382f1b4208) has joined #beagle
  • [14:00:01] * JuanG (n=Juan@nat/ti/x-e73b08382f1b4208) has left #beagle
  • [14:00:33] <felipec> kulve: weird, did you reload the module?
  • [14:00:40] <kulve> no..
  • [14:00:44] <kulve> rebooting..
  • [14:03:14] <kulve> I think it played it for a second but then I got the same error
  • [14:05:29] <felipec> kulve: I saw something similar with an old version of the public dsp nodes
  • [14:05:54] <felipec> kulve: but replacing those dsp nodes with the official ones seemed to work
  • [14:06:47] <kulve> I'll try to replace the whole dsp directory
  • [14:06:47] <felipec> I'm trying 2.6.27-omap1 and it doesn't seem to work correctly =/
  • [14:06:55] <kulve> :(
  • [14:09:50] <felipec> which is weird because the last one I tried was 2.6.27-omap1~5
  • [14:11:15] * alecrim (n=alecrim@192.100.104.170) has joined #beagle
  • [14:13:57] * nooomem (n=chatzill@ip68-100-201-32.dc.dc.cox.net) has joined #Beagle
  • [14:14:13] <nooomem> hey all
  • [14:14:43] <nooomem> I'm looking to decide which flash card would go best with the beagleboard. I'm looking for an 8 gb.
  • [14:29:00] <kulve> I'm not sure if u-boot is able to load x-loader for sdhc card?
  • [14:29:11] <kulve> I'm using 2G non-hc cards
  • [14:30:00] <kulve> but x-loader, u-boot and kernel can be flashed using some other card (or the already flashed u-boot) and then the kernel is the only needing to know how to use sdhc cards and it should work ok
  • [14:30:55] <felipec> kulve: I'll keep trying to find the issue
  • [14:32:17] <pbrook> sdhc cards work fine with uboot and xloader.
  • [14:32:42] <kulve> pbrook: great
  • [14:33:35] <kulve> felipec: nice, let me know if you find something.
  • [14:39:12] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [14:41:21] <wiking> anybody saw errors like this: omapfb omapfb: irq error status 4000
  • [14:44:40] <LoneMeow> plenty of those with our less-than-stellarly-working downscale patch for dispc :D
  • [14:46:01] * Beagle2 (i=BeagleUs@dialup-4.226.150.20.Dial1.Dallas1.Level3.net) has joined #beagle
  • [14:46:37] * rsalveti (n=salveti@189.70.63.219) Quit (Read error: 113 (No route to host))
  • [14:47:19] <Beagle2> I am interested in purchasing a Beagle Board but am wondering if I should wait until the new board come out. Recommendations?
  • [14:48:53] <Beagle2> That's comes out not come out.
  • [14:49:04] * gduncan (n=spec@pool-96-224-182-204.nycmny.east.verizon.net) has joined #beagle
  • [14:49:22] * rsalveti (n=salveti@200.184.118.132) has joined #beagle
  • [14:49:27] <pbrook> Beagle2: Only you can really answer that. The limitations of the current hardware are on the web/wiki.
  • [14:50:14] <Beagle2> I saw those and am new to the whole process.
  • [14:51:19] * RogerMonk (n=a0740758@nat/ti/x-9d661082a4c012e3) has joined #beagle
  • [14:53:52] <odikrause> Hi guys. I have a picture on one of my monitors whereas on the other monitors, no picture is displayed, however, i see some blue vertical stripes, is this normal or sshould I be worried?
  • [14:55:51] * Beagle2 (i=BeagleUs@dialup-4.226.150.20.Dial1.Dallas1.Level3.net) Quit ()
  • [14:59:52] * dirk2 (n=dirk@F3142.f.strato-dslnet.de) has joined #beagle
  • [14:59:54] * RogerMon1 (n=a0740758@nat/ti/x-fd4dee6211bee096) Quit (Remote closed the connection)
  • [15:01:46] * ewerw (n=Beagle6@s-inf-pc117.oulu.fi) Quit (Remote closed the connection)
  • [15:02:03] <jkridner|work> odikrause: it is probably due to the the resolutions and frequencies supported by your monitor.
  • [15:02:47] <jkridner|work> the kernel today doesn't read the EDID or dynamically switch the resolution.
  • [15:02:54] * jrmuizel (n=jrmuizel@ip67-152-86-163.z86-152-67.customer.algx.net) has joined #beagle
  • [15:03:10] <jkridner|work> you'd have to compile your kernel or configure it from the kernel command line to set the appropriate resolution for your monitor.
  • [15:04:50] * jrmuizel (n=jrmuizel@ip67-152-86-163.z86-152-67.customer.algx.net) Quit (Client Quit)
  • [15:12:55] <odikrause> and the vertical stripes?
  • [15:18:06] <nooomem> what cable do I need to hookup a normal (self-powered) USB hub
  • [15:18:08] <nooomem> ?
  • [15:19:03] <koen> jkridner|work: how did the beagle workshop go?
  • [15:21:15] * N208LG (n=danson@63.127.251.26) has joined #beagle
  • [15:22:11] * kozak|work (i=cbc8c84a@gateway/web/ajax/mibbit.com/x-fa31489c193cba20) Quit ("http://www.mibbit.com ajax IRC Client")
  • [15:24:19] <dirk2> nooomem: http://elinux.org/BeagleBoardFAQ#USB_OTG_connection_.231
  • [15:25:05] <dirk2> nooomem: http://elinux.org/BeagleBoard#OTG
  • [15:25:12] * gduncan (n=spec@pool-96-224-182-204.nycmny.east.verizon.net) Quit ()
  • [15:25:45] <nooomem> dirk2: that looks good - btw, mini-a is the common connector for the cameras/phones (like the razr) right?
  • [15:28:08] * jrmuizel (n=jrmuizel@ip67-152-86-163.z86-152-67.customer.algx.net) has joined #beagle
  • [15:32:17] <pbrook> nooomem: No. Most devices (and cables) have a mini-b connector.
  • [15:35:20] <nooomem> how do you guys normally connect a usb hub. which cable do you use?
  • [15:40:10] <pbrook> You need mini-a to whatever your hub has. I use a mini-a to std-b cable.
  • [15:40:54] <pbrook> Other people use mini-a to mini-b or mini-a to std-a-female.
  • [15:43:49] * jrmuizel (n=jrmuizel@ip67-152-86-163.z86-152-67.customer.algx.net) Quit ()
  • [15:48:33] * nooomem (n=chatzill@ip68-100-201-32.dc.dc.cox.net) Quit (Read error: 104 (Connection reset by peer))
  • [15:52:35] * jkridner|work (n=a0321898@nat/ti/x-10144bcc1874bc52) Quit (Remote closed the connection)
  • [16:01:14] * jrmuizel (n=jrmuizel@corp-241.mountainview.mozilla.com) has joined #beagle
  • [16:04:05] * abitos (n=nixgibts@dslb-084-057-150-029.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [16:04:38] * abitos (n=nixgibts@dslb-084-057-150-029.pools.arcor-ip.net) has joined #beagle
  • [16:17:43] * Beagle6 (n=Beagle6@host74-10-dynamic.40-79-r.retail.telecomitalia.it) has joined #beagle
  • [16:18:03] * zedstar (n=john@fsf/member/zedstar) Quit (Remote closed the connection)
  • [16:18:34] * Beagle6 (n=Beagle6@host74-10-dynamic.40-79-r.retail.telecomitalia.it) Quit (Client Quit)
  • [16:35:24] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [16:38:23] <wiking> here's openwrt image for beagleboard: http://categorizer.tmit.bme.hu/~wiking/owrt-beagle/openwrt-beagle-uImage
  • [16:38:28] <wiking> currently it's just initramfs ....
  • [16:39:06] * adj_ (i=antti@hervanta.com) Quit (kubrick.freenode.net irc.freenode.net)
  • [16:39:06] * sphere (i=bianco@85.12.6.154) Quit (kubrick.freenode.net irc.freenode.net)
  • [16:39:06] * Pavlov (n=pavlov@shell.off.net) Quit (kubrick.freenode.net irc.freenode.net)
  • [16:39:06] * jkridner (n=jason@c-76-31-18-64.hsd1.tx.comcast.net) Quit (kubrick.freenode.net irc.freenode.net)
  • [16:39:06] * shoragan (n=shoragan@debian/developer/shoragan) Quit (kubrick.freenode.net irc.freenode.net)
  • [16:40:55] * adj_ (i=antti@hervanta.com) has joined #beagle
  • [16:40:55] * sphere (i=bianco@85.12.6.154) has joined #beagle
  • [16:40:55] * shoragan (n=shoragan@debian/developer/shoragan) has joined #beagle
  • [16:40:55] * jkridner (n=jason@c-76-31-18-64.hsd1.tx.comcast.net) has joined #beagle
  • [16:40:55] * Pavlov (n=pavlov@shell.off.net) has joined #beagle
  • [16:44:47] * gduncan (n=spec@static-71-249-182-7.nycmny.east.verizon.net) has joined #beagle
  • [16:57:35] * Crofton (n=balister@12.165.222.97) has joined #beagle
  • [16:58:42] <felipec> kulve: ah, no, I was using the public binaries... the ones from TI official release work fine
  • [16:59:52] <mrc3_> felipec, pong
  • [17:00:32] <felipec> mrc3_: do you have information regarding tiopenmax-0.4? kulve is having issues
  • [17:02:09] <mrc3_> felipec, kulve, it'll be out soon, i'm hoping it'll be something before next week
  • [17:02:42] <kulve> mrc3_: sounds good
  • [17:02:57] <kulve> felipec: I assume I can clone it from your repository? :)
  • [17:03:32] <felipec> kulve: of course :)
  • [17:16:24] * nooomem (n=chatzill@ip68-100-201-32.dc.dc.cox.net) has joined #Beagle
  • [17:16:55] <nooomem> is there no way to open up a console connection with the beagleboard through the USB?
  • [17:17:36] <nooomem> I have a power adapter for the board and was expecting to use the USB to possibly do some exploration.
  • [17:18:48] <felipec> nooomem: in theory yes, but you need the right driver both on the beagle and pc
  • [17:19:22] <nooomem> felipec: what driver would this be? does one even exist?
  • [17:19:35] <Crofton> jkridner, ping
  • [17:21:26] <felipec> nooomem: CDC ACM
  • [17:21:41] <felipec> nooomem: for the beagle it's in the usb gadget support
  • [17:22:07] <nooomem> so should my computer actually see something show up?
  • [17:22:20] * k2340 (n=k2340@lawn-128-61-18-76.lawn.gatech.edu) has joined #beagle
  • [17:22:22] <nooomem> when I connect it with a normal usb- mini-b cable?
  • [17:25:52] <felipec> nooomem: /dev/ttyUSB0 I think
  • [17:26:29] <nooomem> okay, will check out what I can see. is it possible to get a serial console like the one you get with a serial connection?
  • [17:26:36] <nooomem> aka, minicom?
  • [17:26:56] <vlad_> not really via usb gadget
  • [17:27:11] <vlad_> won't be ttyUSB0, might show up as a usb net device
  • [17:40:33] * Crofton (n=balister@12.165.222.97) Quit ("Leaving")
  • [17:42:38] * Fl1pFl0p (n=Fl1pFl0p@146.244.179.111) has joined #beagle
  • [18:01:52] * guillaum1 (n=gzba4143@AMontsouris-153-1-79-42.w90-2.abo.wanadoo.fr) Quit ("Leaving.")
  • [18:02:20] * guillaum1 (n=gl@AMontsouris-153-1-79-42.w90-2.abo.wanadoo.fr) has joined #beagle
  • [18:07:58] * FuL|OUT is now known as fulgas
  • [18:09:11] * Ragha (n=Ragha@nat/ti/x-50c5674ba43a5b71) has joined #beagle
  • [18:10:38] * k2340 (n=k2340@lawn-128-61-18-76.lawn.gatech.edu) Quit (Read error: 110 (Connection timed out))
  • [18:13:57] * florian (n=fuchs@217.146.132.69) Quit (Remote closed the connection)
  • [18:16:48] * koen finally has something working wrt touchscreen and evm
  • [18:17:18] <koen> still no xcalibrate though
  • [18:22:04] <kulve> koen: so still red but the ts works as expected?
  • [18:22:36] <koen> still red, still 16x16 resolution
  • [18:22:42] <koen> and the calibration is off in Xorg
  • [18:22:49] <koen> and since Xcalibrate is missing....
  • [18:29:39] * john3909 (n=jsynesio@76-216-254-210.lightspeed.dlmrca.sbcglobal.net) has joined #beagle
  • [18:31:54] * abitos (n=nixgibts@dslb-084-057-150-029.pools.arcor-ip.net) Quit (Nick collision from services.)
  • [18:32:09] * abitos (n=nixgibts@dslb-084-057-207-169.pools.arcor-ip.net) has joined #beagle
  • [18:33:11] * john3909 (n=jsynesio@76-216-254-210.lightspeed.dlmrca.sbcglobal.net) has left #beagle
  • [18:34:19] * john3909 (n=jsynesio@76-216-254-210.lightspeed.dlmrca.sbcglobal.net) has joined #beagle
  • [18:35:25] * dirk2 (n=dirk@F3142.f.strato-dslnet.de) has left #beagle
  • [18:37:00] * Crofton (n=balister@12.165.222.1) has joined #beagle
  • [18:42:43] * jkridner|work (n=a0321898@nat/ti/x-a5204dc00e1c0063) has joined #beagle
  • [18:44:44] <mru> morning jkridner|work
  • [18:45:11] * felipec (i=c0647cda@gateway/web/ajax/mibbit.com/x-2da347252f4f8ad1) Quit ("http://www.mibbit.com ajax IRC Client")
  • [18:46:08] <Crofton> gm
  • [18:46:37] <Crofton> jkridner|work, ping
  • [18:53:57] * JimDonovan (n=jimd@c-66-30-221-249.hsd1.ma.comcast.net) has joined #beagle
  • [18:56:15] * valhalla (n=valhalla@81-174-21-31.dynamic.ngi.it) has joined #beagle
  • [18:57:24] * Session^ (n=session@83.84-48-40.nextgentel.com) has joined #beagle
  • [19:09:51] * RogerMonk (n=a0740758@nat/ti/x-9d661082a4c012e3) has left #beagle
  • [19:12:09] * lukketto (n=luca@host100-157-dynamic.10-87-r.retail.telecomitalia.it) has joined #beagle
  • [19:14:39] * jkridner|work (n=a0321898@nat/ti/x-a5204dc00e1c0063) Quit ("Leaving.")
  • [19:36:26] * rsalveti (n=salveti@200.184.118.132) Quit (Read error: 113 (No route to host))
  • [19:38:00] * nooomem (n=chatzill@ip68-100-201-32.dc.dc.cox.net) Quit (Remote closed the connection)
  • [19:57:52] * lukketto (n=luca@host100-157-dynamic.10-87-r.retail.telecomitalia.it) Quit ("Leaving.")
  • [19:58:03] * Crofton (n=balister@12.165.222.1) Quit ("Leaving")
  • [20:01:54] * chelli (n=chelli@p54B8654B.dip.t-dialin.net) has joined #beagle
  • [20:07:05] * JimDonovan (n=jimd@c-66-30-221-249.hsd1.ma.comcast.net) Quit (Read error: 110 (Connection timed out))
  • [20:16:50] <Sundar> is there GIT tree for uboot & x-loader?
  • [20:20:46] * hli (i=chaton@vig91-2-82-232-97-149.fbx.proxad.net) has joined #beagle
  • [20:29:57] * alecrim (n=alecrim@192.100.104.170) Quit (Read error: 113 (No route to host))
  • [20:35:07] * Session^ (n=session@83.84-48-40.nextgentel.com) Quit ("Leaving")
  • [20:40:32] * alecrim (n=alecrim@192.100.104.170) has joined #beagle
  • [20:41:24] * Fl1pFl0p (n=Fl1pFl0p@146.244.179.111) has left #beagle
  • [20:53:50] * valhalla (n=valhalla@81-174-21-31.dynamic.ngi.it) Quit ("Leaving")
  • [21:10:35] * fulgas is now known as FuL|OUT
  • [21:13:47] * bazbell (n=a0192809@nat/ti/x-3894dd48c6120a63) Quit (Remote closed the connection)
  • [21:17:40] * BThompson (n=BThompso@nat/ti/x-541edf3653610651) Quit ("Trillian (http://www.ceruleanstudios.com")
  • [21:20:40] * igor321 (n=igor@93-138-187-16.adsl.net.t-com.hr) has joined #beagle
  • [21:56:21] * bazbell (n=a0192809@nat/ti/x-e77d9bd289dd9a0b) has joined #beagle
  • [22:00:15] * igor321 (n=igor@93-138-187-16.adsl.net.t-com.hr) has left #beagle
  • [22:02:43] * Geicus_ (n=chatzill@64.132.1.226) has joined #beagle
  • [22:14:36] * Geicus (n=chatzill@64.132.1.226) Quit (Read error: 113 (No route to host))
  • [22:33:18] * guillaum1 (n=gl@AMontsouris-153-1-79-42.w90-2.abo.wanadoo.fr) Quit ("Leaving.")
  • [22:33:37] * guillaum1 (n=Guillaum@AMontsouris-153-1-79-42.w90-2.abo.wanadoo.fr) has joined #beagle
  • [22:34:08] * guillaum1 (n=Guillaum@AMontsouris-153-1-79-42.w90-2.abo.wanadoo.fr) Quit (Read error: 104 (Connection reset by peer))
  • [22:34:17] * guillaum1 (n=Guillaum@AMontsouris-153-1-79-42.w90-2.abo.wanadoo.fr) has joined #beagle
  • [22:35:18] * Sundar (n=adas@144.190.93.24) has left #beagle
  • [22:35:38] * Sundar (n=adas@144.190.93.24) has joined #beagle
  • [22:37:12] * jkridner|work (n=a0321898@nat/ti/x-90f3c600d2e8fcd9) has joined #beagle
  • [22:37:24] <jkridner|work> hi
  • [22:37:36] <jkridner|work> mru, Crofton: pong
  • [22:37:56] <jkridner|work> beagle workshops went very well.
  • [22:38:39] <jkridner|work> everybody enjoyed Bill Gatliff's presentations, but wished he had more hands-on with the Beagle.
  • [22:38:56] * prpplague (n=dave@mail.americanmicrosystems.com) Quit ("Leaving")
  • [22:39:23] <jkridner|work> The 3D, GStreamer, and Bluetooth presentations were all very hands-on, but not long enough for most people. Just started to get their feet wet when the class time ended.
  • [22:40:02] <jkridner|work> Got good feedback on Gerald's presentation as well. Lots of questions answered for people looking to do their own boards.
  • [22:45:24] * docelic (n=docelic@78.134.202.52) has joined #beagle
  • [22:48:09] * chelli (n=chelli@debian/developer/tschmidt) Quit ("IRC is just multiplayer notepad")
  • [22:51:24] * BThompson (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) has joined #beagle
  • [22:55:07] <Sundar> how to flash kernel onto nand?
  • [22:55:54] <Ragha> Sundar, use mtd utils
  • [22:56:23] <Sundar> can you give me some more pointer/
  • [22:56:25] <Sundar> ?
  • [22:56:26] <Ragha> like nandwrite, erase application
  • [22:57:01] <Sundar> cant i do it off the bootloader prompt,just the way i do it for flashing a new bootloader or xloader
  • [22:57:04] <Sundar> ?
  • [22:57:47] <Sundar> and save a environment variable like - bootm <hex>
  • [22:58:07] <Ragha> you can use u-boot as well
  • [22:59:32] * N208LG (n=danson@63.127.251.26) Quit (Read error: 110 (Connection timed out))
  • [22:59:55] <Ragha> you can use nand commands
  • [23:01:05] <Ragha> i really not tried with u-boot
  • [23:01:21] <Ragha> i use mtd apps
  • [23:01:57] * robclark (n=robclark@nat/ti/x-806aa692cbd123e7) Quit ()
  • [23:15:06] * docelic (n=docelic@78.134.202.52) Quit ("http://www.spinlocksolutions.com/")
  • [23:21:05] * florian (n=fuchs@f054163127.adsl.alicedsl.de) has joined #beagle
  • [23:31:17] * Olipro (i=Olipro@uncyclopedia/Olipro) has joined #beagle
  • [23:48:52] * guillaum1 (n=Guillaum@AMontsouris-153-1-79-42.w90-2.abo.wanadoo.fr) Quit ("Leaving.")
  • [23:49:02] * guillaum1 (n=gl@AMontsouris-153-1-79-42.w90-2.abo.wanadoo.fr) has joined #beagle
  • [23:57:12] * emeb (n=ericb@ip72-223-95-46.ph.ph.cox.net) has left #beagle