[00:00:07] * RogerMon1 (n=a0740758@nat/ti/x-822582ba7410d9e6) Quit (Remote closed the connection)
[00:00:15] * RogerMonk (n=a0740758@nat/ti/x-9a82580c403ba0a0) Quit (Remote closed the connection)
[00:01:21] * RogerMonk (n=a0740758@nat/ti/x-1e3f7e6c4ff26320) has joined #beagle
[00:15:19] * RogerMon1 (n=a0740758@nat/ti/x-72e80101354da695) has joined #beagle
[00:19:13] * RogerMonk (n=a0740758@nat/ti/x-1e3f7e6c4ff26320) Quit (Remote closed the connection)
[00:22:25] * bazbell (n=a0192809@nat/ti/x-09f99b4b6fd04d67) has joined #beagle
[00:23:03] * RogerMon1 (n=a0740758@nat/ti/x-72e80101354da695) Quit (Remote closed the connection)
[00:25:40] * RogerMonk (n=a0740758@nat/ti/x-204bef69415d45ac) has joined #beagle
[01:15:32] * zodttd (n=recompil@user-142gtg7.cable.mindspring.com) Quit (kubrick.freenode.net irc.freenode.net)
[01:15:32] * Ragha (n=Ragha@nat/ti/x-b65578fb20f52ba3) Quit (kubrick.freenode.net irc.freenode.net)
[01:16:13] * zodttd (n=recompil@user-142gtg7.cable.mindspring.com) has joined #beagle
[01:16:13] * Ragha (n=Ragha@nat/ti/x-b65578fb20f52ba3) has joined #beagle
[01:27:50] * RogerMonk (n=a0740758@nat/ti/x-204bef69415d45ac) Quit (Remote closed the connection)
[01:30:32] * JoeBorn (n=jborn@dsl017-022-252.chi1.dsl.speakeasy.net) Quit (Read error: 110 (Connection timed out))
[01:31:24] * RogerMonk (n=a0740758@nat/ti/x-fbeae239ef728e22) has joined #beagle
[01:44:56] * RogerMon1 (n=a0740758@nat/ti/x-8005548adaaedec2) has joined #beagle
[01:48:51] * RogerMonk (n=a0740758@nat/ti/x-fbeae239ef728e22) Quit (Remote closed the connection)
[01:52:05] * NishanthM (n=Nishanth@cpe-24-175-68-203.tx.res.rr.com) has joined #beagle
[02:09:14] * jkridner|work (n=a0321898@nat/ti/x-4b52bca154fdcfde) has left #beagle
[03:45:11] * bazbell (n=a0192809@nat/ti/x-09f99b4b6fd04d67) Quit (Remote closed the connection)
[03:49:16] * bazbell (n=a0192809@nat/ti/x-52627bd63c604bcc) has joined #beagle
[03:51:20] * NishanthM (n=Nishanth@cpe-24-175-68-203.tx.res.rr.com) Quit (Remote closed the connection)
[03:52:22] * JoeBorn (n=jborn@adsl-75-3-5-3.dsl.chcgil.sbcglobal.net) has joined #beagle
[04:05:44] * BThompson (n=BThompso@cpe-76-185-66-252.tx.res.rr.com) Quit ("Trillian (http://www.ceruleanstudios.com")
[04:14:43] * JoeBorn (n=jborn@adsl-75-3-5-3.dsl.chcgil.sbcglobal.net) Quit (Remote closed the connection)
[06:04:59] * RogerMonk (n=a0740758@nat/ti/x-dd65ac546c6bd0ac) has joined #beagle
[06:05:16] * RogerMon1 (n=a0740758@nat/ti/x-8005548adaaedec2) Quit (Remote closed the connection)
[06:08:53] * RogerMon1 (n=a0740758@nat/ti/x-e0f75bf8b6600de7) has joined #beagle
[06:12:58] * RogerMonk (n=a0740758@nat/ti/x-dd65ac546c6bd0ac) Quit (Remote closed the connection)
[06:15:45] * RogerMonk (n=a0740758@nat/ti/x-b8e1f36ee444e919) has joined #beagle
[06:19:36] * RogerMon1 (n=a0740758@nat/ti/x-e0f75bf8b6600de7) Quit (Remote closed the connection)
[07:03:14] <koen> sakoman: congrats on getting more omap3 evm patches online
[07:21:29] * PibbRelay (n=supybot@nat/janrain/x-338adf53a7f56a9d) has joined #beagle
[07:21:53] * RogerMonk (n=a0740758@nat/ti/x-b8e1f36ee444e919) Quit (Remote closed the connection)
[07:26:50] * RogerMonk (n=a0740758@nat/ti/x-b86b34527c3100c3) has joined #beagle
[07:50:17] * RogerMonk (n=a0740758@nat/ti/x-b86b34527c3100c3) Quit (Remote closed the connection)
[07:50:45] * RogerMonk (n=a0740758@nat/ti/x-a099769aeea3b76a) has joined #beagle
[08:05:35] * RogerMon1 (n=a0740758@nat/ti/x-209a1925a29c0ea0) has joined #beagle
[08:10:51] * RogerMonk (n=a0740758@nat/ti/x-a099769aeea3b76a) Quit (Remote closed the connection)
[10:20:20] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) has joined #beagle
[10:39:33] * RogerMon1 (n=a0740758@nat/ti/x-209a1925a29c0ea0) has left #beagle
[11:43:08] * RogerMonk (n=a0740758@nat/ti/x-20cd857c2e311a75) has joined #beagle
[12:40:16] * bazbell (n=a0192809@nat/ti/x-52627bd63c604bcc) Quit (Remote closed the connection)
[12:51:57] <sakoman> koen: thanks. I'm looking forward to doing some for beagleboard
[13:01:58] <koen> sakoman: the RTC looks like an easy one :)
[13:02:28] <sakoman> Yeah! NAND flash should be quite simple too
[13:02:37] <sakoman> And then frame buffer
[13:05:20] <Crofton> I'm using EXTRA_OECONF_append_arm in file to select some fixed point math routines
[13:05:36] <Crofton> but for beagle I do not want this to happen
[13:07:03] <koen> MATHSTUFF ?= "" MATHSTUFF_arm = " --enable-fixedpoint" MATHSTUFF_armv6 = " --enable-float" MATHSTUFF_armv7a = ""
[13:07:16] <koen> EXTRA_OECONF += "${MATHSTUFF}"
[13:07:49] <koen> and if your diligent you can add MATHSTUFF_ppc405 = " --enable-fixedpoint" as well
[13:07:54] <koen> or
[13:08:13] <Crofton> or EXTRA_OECONF_append_armv5 ....
[13:08:54] <koen> no
[13:09:08] <koen> I forgot that you can do softfloat armv7a as well
[13:09:12] <koen> Crofton: http://rafb.net/p/6yk22z76.txt
[13:09:19] <koen> you probably need something like that
[13:16:38] * koen is now known as koen|uni
[13:26:49] * DarrenEtheridge (n=a0867391@nat/ti/x-cfe7741c456d1d26) has joined #beagle
[13:34:46] * bazbell (n=a0192809@nat/ti/x-0b1716382bfd46b4) has joined #beagle
[13:39:37] * prpplague (n=dave@mail.americanmicrosystems.com) has joined #beagle
[13:40:09] * BThompson (n=BThompso@nat/ti/x-4f38b5d97afc8842) has joined #beagle
[13:52:48] * jkridner|work (n=a0321898@nat/ti/x-bdbbf08637f240df) has joined #beagle
[14:09:08] * cs97009 (i=c0a314e7@gateway/web/ajax/mibbit.com/x-e03695cf5eabcf37) has joined #beagle
[14:53:33] * cs97009 (i=c0a314e7@gateway/web/ajax/mibbit.com/x-e03695cf5eabcf37) has left #beagle
[14:54:50] * khasim (n=a0393720@192.163.20.231) has joined #beagle
[15:34:36] * DarrenEtheridge (n=a0867391@nat/ti/x-cfe7741c456d1d26) Quit (Remote closed the connection)
[15:37:03] * DarrenEtheridge (n=a0867391@nat/ti/x-82b3710b60dabdc4) has joined #beagle
[15:39:01] * JoeBorn (n=jborn@dsl017-022-252.chi1.dsl.speakeasy.net) has joined #beagle
[15:40:38] * RogerMon1 (n=a0740758@nat/ti/x-e204ec60703805a9) has joined #beagle
[15:44:33] * RogerMonk (n=a0740758@nat/ti/x-20cd857c2e311a75) Quit (Remote closed the connection)
[15:48:30] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
[16:15:15] <koen|uni> I'm an idiot: http://www.flickr.com/photos/koenkooi/2475622891/
[16:15:26] * koen|uni is now known as koen
[16:15:32] * DarrenEtheridge (n=a0867391@nat/ti/x-82b3710b60dabdc4) has left #beagle
[16:19:17] <ldesnogu> that doesn't look pretty :)
[16:19:33] <koen> that's because it isn't pretty :)
[16:19:45] <koen> I still lack a decent soldering iron at home
[16:24:33] * khilman (n=khilman@deeprooted.net) has joined #beagle
[16:25:44] * bazbell (n=a0192809@nat/ti/x-0b1716382bfd46b4) Quit ("Leaving.")
[16:33:30] <ldesnogu> I have no soldering iron, that would put my life in danger
[16:39:27] <koen> there, RTC patch sent to linux-omap
[16:41:05] <jkridner|work> thanks.
[16:41:50] <jkridner|work> do you think there was something that could be done to the board to prevent this mishaps in the future?
[16:42:10] <jkridner|work> (the thanks was for the RTC patch, not busting your board. :) )
[16:43:45] <koen> jkridner|work: it really is a pebkac problem
[16:44:30] <koen> if you want to prevent it, you could use the really big and stout connectors that you mount through holes
[16:45:46] <koen> jkridner|work: one idea for when the beagle goes on sale: a small case for the beagle
[16:46:45] <koen> where 'case' might mean "8x8cm plexiglass with beagle mounted on studs"
[16:48:07] <jkridner|work> We are trying to keep Beagle as affordable as possible, despite the costs of manufacturing such fine pitch in such small quantities.
[16:48:23] <jkridner|work> after-market cases would be welcome.
[16:48:33] <koen> As you might have guessed, I have no idea about costs for things like that
[16:48:33] <jkridner|work> connectors probably aren't positioned the best for cases.
[16:49:55] <jkridner|work> This crowd is early adopters. Hopefully once a few hundred are out there, then demand for cases might be real enough. I'd be happy if a company who made money on hardware picked up the Beagle design and made it.
[16:50:02] <jkridner|work> I think we are just a bit early for that.
[16:50:22] <jkridner|work> your Angstrom distribution, however, is a nice lift.
[16:50:30] <ldesnogu> do you have an estimate of the number of units you will build?
[16:50:49] <jkridner|work> hmmm... I guess I can share.
[16:51:02] <jkridner|work> We are currently building 150.
[16:51:14] <jkridner|work> that should be the final run before "production".
[16:51:32] <jkridner|work> then, we will build another 800 or so.
[16:51:43] <jkridner|work> then it will be up to demand to drive building more.
[16:51:56] <jkridner|work> given the interest level, I believe they will all go quickly.
[16:52:10] <ldesnogu> indeed...
[16:53:02] <jkridner|work> if someone wants to make a big order, I suggest they start bugging me now (and show up with some $$).
[16:53:14] <jkridner|work> there are some big-lead-time items.
[16:53:36] <ldesnogu> the price is incredibly low compared to other boards, and given the power, there's no doubt the 800 will go in no time :)
[16:53:50] <jkridner|work> that has been part of the reason for such slow development. (It seems slow to me, anyway. I'm used to boards in 6 weeks. Not so easy with this fine pitch stuff.)
[16:55:55] <jkridner|work> at this point, I'm not comfortable pushing into my management's pockets for more. I'd be quite happy if someone else wanted to take a bit of a chance on this and we could share more financial details.
[16:56:10] <koen> I know people that bought a http://www.rabbit.com/products/RCM4300/ and were jealous about the beagle and the tincantools stuff
[16:57:20] <jkridner|work> That looks pretty neat, but definitely underpowered compared to Beagle.
[16:57:37] * jkridner|work pictures a beagle chasing a rabbit and feels silly.
[16:57:47] <ldesnogu> :)
[16:58:19] <koen> I'm glad the beagle isn't called ultrawolf 6000 or something like that
[17:00:41] <jkridner|work> :)
[17:06:21] <koen> wow, 2 reviews already
[17:06:27] <ali_as> sabretoothbeagle.
[17:06:43] <koen> one highlighting my inablity to make git do something usefull
[17:07:52] <jkridner|work> got a +1 from sakoman
[17:08:42] <koen> it's basically an s/evm/beagle/ on his rtc patch
[17:11:15] <jkridner|work> is the TWL4030 in the Kconfig already?
[17:11:30] <jkridner|work> I don't know that you'd want to have beagle in the #ifdef.
[17:12:16] <jkridner|work> oh, maybe I misunderstood his request.
[17:12:39] <koen> the ifdef as it is is in the 'wrong' place
[17:12:49] <koen> it will make sense once the lcd gets added :)
[17:13:05] <jkridner|work> where is the use of omap3_beagle_devices?
[17:13:22] <jkridner|work> ah.
[17:13:29] * NishanthMenon (n=gnat@nat/ti/x-469b808a370588df) has joined #beagle
[17:17:47] * RogerMon1 (n=a0740758@nat/ti/x-e204ec60703805a9) Quit (Remote closed the connection)
[17:19:17] <zodttd> Checked the EVM for L2 being on...It is. :)
[17:19:26] <koen> great
[17:20:40] <zodttd> ldesnogu: Got your message. Thanks for the tips :)
[17:26:16] <ldesnogu> zodttd: np :)
[17:43:23] <koen> zodttd: which kernel are you running on your EVM?
[17:43:34] <koen> the wtbu one?
[17:51:56] <zodttd> back... 2.6.22.1-omap1
[17:55:13] <koen> you could try git head or a prebuilt one from sakoman to see if things like CFS make a difference for your apps
[17:55:45] <koen> e.g. one from http://www.sakoman.net/omap3/
[17:56:11] <zodttd> Aha...Hmm I will definitely look into doing that.
[17:56:22] <zodttd> What is CFS though?
[17:56:34] <koen> completely fair scheduler
[17:56:39] <zodttd> aha!
[17:56:43] <zodttd> cool
[17:58:32] * DarrenEtheridg1 (n=a0867391@nat/ti/x-cbb473593fc0a0e3) has joined #beagle
[17:58:36] <sakoman> zodttd: Those images koen referred to are a few weeks old. I'm doing a clean build right now. I'll post fresh images when it completes
[17:58:36] <zodttd> I'd like to get my EVM as close as possible to what the Pandora will be. If it's going the OE route, I'd like OE, for instance.
[17:58:46] <zodttd> Awesome sakoman :)
[17:58:49] <zodttd> Thanks
[17:59:44] <zodttd> sakoman: Whats the main differences between whats built on the EVM, and your distro? I noticed you use a newer kernel.
[18:01:13] <sakoman> I'm mainly working on getting evm support into linux-omap, so the kernel is not as full featured as the one that ships with the evm
[18:01:45] <sakoman> But it is at the bleeding edge -- currently 2.6.26rc1
[18:02:07] <zodttd> Oh, I'm currently with a stock EVM.
[18:02:13] <zodttd> Very cool
[18:02:24] <sakoman> Has onenand, rtc, lcd, touchscreen, ethernet, usb, mmc
[18:02:42] <ldesnogu> So you have an OMAP3503 (and not 3530)?
[18:02:43] <sakoman> l2 not yet enabled, and no audio yet
[18:02:47] <sakoman> yes
[18:02:56] <sakoman> stock omap3 evm
[18:03:02] <zodttd> I have a 3530
[18:03:09] <ldesnogu> ha cool :)
[18:03:18] <sakoman> Should work just the same
[18:03:21] <zodttd> ok
[18:03:47] <sakoman> The rootfs image is an x11/gpe image
[18:04:03] <sakoman> Just an interesting collection of stuff to play & test with
[18:04:11] <zodttd> sakoman: By any chance would the process I've used (writing to the HW regs via /dev/mem) to overclock no longer work on your distro? ;)
[18:04:12] <koen> sakoman: the l2 patch in packages/linux/linux-omap2-git/beagleboard/ works like a charm
[18:04:44] <ldesnogu> zodttd: you should be careful about what sakoman wrote, L2 not enabled yet ;)
[18:04:55] <zodttd> aha
[18:04:55] <sakoman> koen: it's next on my list to add to the OE recipe, but obviously not for submission to linux-omap
[18:05:15] <sakoman> l2 should be enabled later today
[18:05:25] <zodttd> If L2 is disabled, I lose a large chunk of performance as koen noted
[18:05:29] <sakoman> I'll post that one too
[18:05:35] <zodttd> awesome
[18:05:39] <ldesnogu> indeed :)
[18:07:08] <sakoman> zodttd: no idea on /dev/mem What do you write? I could try it
[18:08:05] <zodttd> Heh, I first up the voltage of the vdd1 by writing a 5 to /sys/power/vdd1_opp_value
[18:08:29] <zodttd> Then I use some code I have...I can share if you'd like
[18:08:34] <sakoman> via command line?
[18:08:46] <zodttd> The voltage, yes. The /dev/mem, no
[18:10:13] <sakoman> Hmm . . . ls of /sys/power just has state
[18:10:27] <ldesnogu> how far did you push the frequency?
[18:10:28] <sakoman> so I may be missing stuff you need
[18:10:39] <zodttd> ldesnogu: ;)
[18:11:14] <zodttd> sakoman: Ah. I dont need to overclock though. Just would be an extra feature available.
[18:12:00] <zodttd> I only need to raise voltage to hit the 625MHz - 925MHz
[18:12:06] <sakoman> just trying to tackle the basics right now -- much easier to get those patches accepted :-)
[18:12:16] <zodttd> no problem :)
[18:16:10] * jkridner|wor1 (n=a0321898@nat/ti/x-1b1b892fe6e0ebc1) has joined #beagle
[18:16:14] <Crofton> grrrr, only gibberish coming out of the beagle when I run my demod FM from a file program
[18:16:29] <Crofton> something to work on next week
[18:16:37] <Crofton> must create poster ....
[18:16:54] <zodttd> wb jkridner
[18:17:00] * altex5 (n=x0084519@nat/ti/x-1a98d10f2d31cb8e) has joined #beagle
[18:17:10] <jkridner|wor1> pong?
[18:17:24] <koen> Crofton: out of the line-out?
[18:17:24] <zodttd> ping
[18:17:32] <Crofton> yeah
[18:17:33] <jkridner|wor1> what does wb mean?
[18:17:37] <Crofton> gnuradio dialtone works
[18:17:40] <koen> Crofton: try madplay foo.mp3 and mpg123 foo.mp3
[18:17:43] <zodttd> welcome back
[18:17:44] <Crofton> welcome back ?
[18:17:45] <zodttd> :)
[18:17:47] <jkridner|wor1> :)
[18:17:53] <koen> Crofton: that gives "gibberish" as well
[18:17:54] <jkridner|wor1> crazy net connection.
[18:17:57] <Crofton> hmmm
[18:18:03] <koen> it seems like it's playing at double speed
[18:18:17] <Crofton> this sounds like endianess
[18:18:28] <koen> I would highly doubt that
[18:18:30] <Crofton> but, I must work on poster
[18:18:41] <Crofton> well, the data file came from a littel endian machine
[18:18:52] <koen> the omap is LE as well
[18:18:56] <zodttd> yeah
[18:19:01] <Crofton> er BE
[18:19:02] <Crofton> ppc
[18:19:10] <Crofton> but I should take of that
[18:19:15] <Crofton> code runs fine on intel
[18:19:37] <ldesnogu> so it's not an endianness issue :)
[18:20:27] <jkridner|wor1> koen: 'opkg install madplay' fails due to a lack of 'libid3tag0' is this right or do I have the wrong feed?
[18:21:04] * NishanthMenon (n=gnat@nat/ti/x-469b808a370588df) Quit (Remote closed the connection)
[18:21:04] * Ragha (n=Ragha@nat/ti/x-b65578fb20f52ba3) Quit (Remote closed the connection)
[18:21:11] * BThompson (n=BThompso@nat/ti/x-4f38b5d97afc8842) Quit (Remote closed the connection)
[18:21:11] * altex4 (n=x0084519@nat/ti/x-b2f742ed48d7549b) Quit (Remote closed the connection)
[18:21:14] * jkridner|work (n=a0321898@nat/ti/x-bdbbf08637f240df) Quit (Remote closed the connection)
[18:21:23] * jkridner|wor1 is now known as jkridner|work
[18:21:44] <koen> jkridner|work: did you do 'opkg update' ?
[18:22:06] <jkridner|work> yes
[18:22:20] <jkridner|work> I don't have armv7a base.
[18:22:28] <koen> but you do have armv6 base?
[18:22:32] <jkridner|work> yes
[18:22:47] <koen> opkg install http://www.angstrom-distribution.org/feeds/2008/ipk/glibc/armv6/base/libid3tag0_0.15.1b-r1_armv6.ipk
[18:23:04] <koen> you said you were behind a proxy, right?
[18:23:25] * BThompson (n=BThompso@nat/ti/x-0554d396e51a27bc) has joined #beagle
[18:24:11] <jkridner|work> I am.
[18:25:13] <koen> jkridner|work: I've seen this before, I'm 95% sure your proxy is caching the Packages.* file
[18:25:25] <koen> could you do 'md5sum /var/lib/opkg/*' ?
[18:25:45] <koen> the base one should be bba740d6934c0a135e110b919de92d08
[18:27:44] <jkridner|work> it is.
[18:27:58] <jkridner|work> I think it could be some other networking issue.
[18:28:07] <jkridner|work> I cannot wget it either, but I can from this machine.
[18:28:46] <koen> ah, so your proxy is sane :)
[18:29:00] <jkridner|work> yeah.
[18:29:26] <koen> it took us a while to track down that various ISPs perform caching
[18:29:35] <jkridner|work> koen: your 'from' address isn't in the beagleboard group list, so it got moderated. just sent it through.
[18:29:51] <koen> yes, my email setup is a mess
[18:30:13] <koen> I subscribed with my gmail address, which I only use to log into google stuff
[18:30:32] * jkridner|work is off to a meeting
[18:31:33] <koen> http://thread.gmane.org/gmane.linux.ports.arm.omap/8173
[18:36:17] * NishanthMenon (n=gnat@nat/ti/x-db68cdbd643b37b8) has joined #beagle
[18:38:10] * jkridner|wor1 (n=a0321898@nat/ti/x-ddafe18ea0ce7a54) has joined #beagle
[18:42:04] * jkridner|work (n=a0321898@nat/ti/x-1b1b892fe6e0ebc1) Quit (Remote closed the connection)
[18:42:13] * jkridner|wor1 is now known as jkridner|work
[18:42:26] <koen> jkridner|work: http://thread.gmane.org/gmane.linux.ports.arm.omap/8173
[18:43:24] <jkridner|work> not having an IRQ handler would definitely be not-so-good.
[18:43:49] <koen> it shows that some of our stability problems aren't beagle specific
[18:47:01] <jkridner|work> Does it look like something is being missed in the patch?
[18:49:18] * koen has no idea
[18:49:58] <Crofton> we aren't really kernel hackers, we just pretend :)
[18:50:06] * koen isn't even a coder
[18:51:04] <Crofton> you could have fooled me
[18:51:05] <jkridner|work> :)
[18:58:04] <khilman> Crofton: can you share the kernel .config you used for your davinci angstrom stuff?
[18:58:12] <Crofton> well
[18:58:14] <Crofton> I would
[18:58:21] <Crofton> but I think I used the defconfig :)
[18:58:35] <khilman> I'm trying your rootfs with my own kernel, and I'm not getting to far into the userland
[18:58:41] <Crofton> I checked to make sure the SHM_FS was compiled in and used that
[18:58:48] <Crofton> what happens?
[18:59:00] <koen> Crofton: CONFIG_IKCONFIG=y
[18:59:00] <koen> CONFIG_IKCONFIG_PROC=y
[18:59:21] <koen> Crofton: and iirc the davinci kernel creates a /boot/config<something> as well
[18:59:29] <Crofton> hmmm, linux.inc may have manipulated it some
[18:59:58] <Crofton> let me see if the meta data browser is runnign
[19:00:28] <koen> I'm pretty syre it isn't running
[19:00:32] <Crofton> khilman, you tried the kernel I made?
[19:00:34] <khilman> I'm booting it over NFS, and udhcpcd starts and appears to whack eth0
[19:00:39] <Crofton> oh
[19:00:40] <Crofton> heh
[19:00:51] <Crofton> edit /etc/network/interfaces
[19:00:55] <koen> khilman: remove "auto eth0"
[19:01:04] <Crofton> find the line koen mentioned
[19:01:07] <koen> from the davinci rootfs
[19:01:07] <Crofton> and comment it out :)
[19:01:11] * khilman was just looking for that
[19:01:11] <Crofton> hahahahah
[19:01:23] <Crofton> can you tell we know all about that one
[19:01:35] <koen> stupid change of behaviour
[19:01:39] <koen> it used to Just Work
[19:01:51] <Crofton> where does that come from?
[19:02:18] <koen> no idea
[19:02:28] <koen> could be kernel, glibc, ifupdown, etc
[19:02:31] <Crofton> I suppose we should try to track that down
[19:02:47] <khilman> the other complaint during boot was:
[19:02:48] <koen> it started happening on my debian (x86) box a while ago as well
[19:02:49] <khilman> root: mount: mount point /proc/bus/usb does not exist
[19:03:16] <Crofton> usbfs?
[19:03:23] <koen> khilman: CONFIG_USB_DEVICEFS=y
[19:03:31] <Crofton> I better check that
[19:03:41] <Crofton> but, I need to clean my gutters before it rains
[19:04:03] <Crofton> khilman, I am leaving for Ireland for a week tomorrow
[19:04:09] <Crofton> so just a little stressed :)
[19:04:46] <khilman> koen: DEVICEFS=y is in my .config
[19:05:04] <khilman> but I have he usb stuff all built as modules
[19:05:50] <khilman> ok, with the 'auto eth0' removed, I've booted to a shell
[19:06:07] <Crofton> great
[19:07:06] <khilman> now, I just have to learn oe a bit better so I can build the stuff myself
[19:07:50] <Crofton> we should also talk about davinci stuff in #davinci :)
[19:12:31] * alecrim (n=alecrim@adsl-212-16-102-44.taloyhtioverkot.fi) has joined #beagle
[19:23:20] * jkridner|wor1 (n=a0321898@nat/ti/x-44996ad36eb1ab64) has joined #beagle
[19:25:02] <jkridner|wor1> Crofton: thanks. :)
[19:25:54] * NishanthMenon (n=gnat@nat/ti/x-db68cdbd643b37b8) Quit ("IceChat - Keeping PC's cool since 2000")
[19:26:11] * NishanthMenon (n=nmenon@nat/ti/x-0c3cceabdbd37aed) has joined #beagle
[19:29:48] * jkridner|work (n=a0321898@nat/ti/x-ddafe18ea0ce7a54) Quit (Remote closed the connection)
[19:37:59] * NishanthMenon (n=nmenon@nat/ti/x-0c3cceabdbd37aed) Quit ("Ex-Chat")
[19:38:24] * NishanthMenon (n=nmenon@nat/ti/x-77d31ded708682cc) has joined #beagle
[19:53:41] <sakoman> koen: do you have a simple way to determine whether l2 is enabled?
[19:54:20] <koen> other than "mplayer benchmark"?
[19:54:32] <sakoman> yes
[19:54:39] <koen> not really
[19:54:43] <koen> you could run lmbench
[19:54:52] <koen> and ask ldesnogu to interpret the results
[19:55:03] <sakoman> OK, I'll try that
[19:55:14] * BThompson (n=BThompso@nat/ti/x-0554d396e51a27bc) Quit ("Trillian (http://www.ceruleanstudios.com")
[19:55:20] <sakoman> Thanks
[19:56:13] <koen> this is with l2 enabled on 2.6.22: http://amethyst.openembedded.net/~koen/beagleboard/lmbench.results.txt
[19:58:23] <sakoman> OK, I'll try later & compare. Have a meeting now . . .
[20:01:08] * DarrenEtheridge (n=a0867391@nat/ti/x-32adedabbdac554d) has joined #beagle
[20:05:11] * DarrenEtheridg1 (n=a0867391@nat/ti/x-cbb473593fc0a0e3) Quit (Remote closed the connection)
[20:07:07] * BThompson (n=BThompso@nat/ti/x-81204a61d96bf026) has joined #beagle
[20:09:28] * alecrim (n=alecrim@adsl-212-16-102-44.taloyhtioverkot.fi) Quit ("Leaving")
[20:09:39] <koen> jkridner|wor1: the beagle has a max pixclock of 65MHz, right?
[20:11:27] <koen> right, found it in the hwrm
[20:19:39] * NishanthMenon (n=nmenon@nat/ti/x-77d31ded708682cc) Quit (Remote closed the connection)
[20:20:11] * NishanthMenon (n=nmenon@nat/ti/x-80bd7e3b37d399ee) has joined #beagle
[20:30:56] <Crofton> sakoman, is probably meeting with his gardener :)
[20:32:09] <sakoman> sakoman *is* his gardener so meetings are short
[20:32:20] <sakoman> on conference call with client . . .
[20:33:18] <koen> completely untested, applies on top of the rtc patch: http://amethyst.openembedded.net/~koen/beagleboard/beagle-dvi-first-try.diff
[20:34:32] <koen> <random comment about wtbu kernel being an ifdef mess>
[20:34:43] * jkridner|wor1 is now known as jkridner|work
[20:34:46] <koen> <random comment about wtbu kernel getting GPIOs wrong>
[20:34:56] <jkridner|work> koen: about 65MHz, yes.
[20:35:10] <koen> 15200 picoseconds was the answer I'm after :)
[20:35:36] <koen> I found it in the wtbu source after I calculated it
[20:36:09] <koen> btw, OSX calculator widget can't handle 10^12 / 65*10^9
[20:36:22] <koen> it returns 1.53<something>
[20:38:17] * koen waits for his davinci build to complete so he can actually test the dvi patch himself
[20:55:12] * like2wise (n=likewise@82-171-51-231.ip.telfort.nl) has joined #beagle
[20:57:01] * bazbell (n=a0192809@nat/ti/x-6394e4d3c036115c) has joined #beagle
[21:02:02] * DarrenEtheridg1 (n=a0867391@nat/ti/x-a545d0d967e04541) has joined #beagle
[21:06:13] * DarrenEtheridge (n=a0867391@nat/ti/x-32adedabbdac554d) Quit (Remote closed the connection)
[21:10:24] <ldesnogu> sakoman: any lmbench result to show? :)
[21:10:50] <koen> ah, davinci build finished
[21:10:55] <sakoman> not yet -- in meetings this afternoon :-(
[21:11:04] <ldesnogu> good luck!
[21:28:12] * like2wise (n=likewise@82-171-51-231.ip.telfort.nl) Quit ()
[21:28:27] <Crofton> how fast can you move data over the sdio interface on the expansion connector
[21:33:46] <koen> 48MHz times 4
[21:33:48] <koen> iirc
[21:34:08] <koen> if it is connected to the omap
[21:34:14] <koen> dunno how fast SPI goes
[21:35:42] <koen> <6>omapfb: configured for panel omap3beagle
[21:35:42] <koen> <6>omapfb: DISPC version 3.0 initialized
[21:35:52] * koen says "YEAH!"
[21:36:11] <koen> <0>Kernel panic - not syncing: Attempted to kill init!
[21:36:17] * koen says "NOOOOOOO!"
[21:45:49] <ldesnogu> gn all
[21:45:54] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) has left #beagle
[21:57:24] * bazbell (n=a0192809@nat/ti/x-6394e4d3c036115c) Quit (Remote closed the connection)
[22:03:21] * BThompson (n=BThompso@nat/ti/x-81204a61d96bf026) Quit ("Trillian (http://www.ceruleanstudios.com")
[22:11:10] * prpplague (n=dave@mail.americanmicrosystems.com) Quit ("Leaving")
[22:32:40] <zodttd> back...
[22:32:58] <zodttd> Theres a simple way to determine whether L2 is enabled
[22:33:03] <zodttd> By reading a hardware register
[23:00:22] * BThompson (n=BThompso@cpe-76-185-66-252.tx.res.rr.com) has joined #beagle
[23:08:00] * DarrenEtheridg1 (n=a0867391@nat/ti/x-a545d0d967e04541) Quit (Remote closed the connection)
[23:49:49] * JoeBorn (n=jborn@dsl017-022-252.chi1.dsl.speakeasy.net) Quit (Read error: 110 (Connection timed out))