Beagle Board - beagleboard.org

ShieldI/O Cape

Use Arduino shields with your BeagleBone or BeagleBone Black

ShieldI/O Cape provides the ability to mount (almost) every Arduino Shield on the BeagleBone Black, no matter if it’s using 3.3V or 5V logic levels. Changing from 3.3V to 5V is done by software. 

It can also be ordered with an onboard 16 pin I/O expander which is accessible over the I2C bus.

See http://www.impressx.com/en-gb/products/shieldio.aspx for more information.




Homepage: http://elinux.org/Impressx:Arduino_Shield_Adapter
Registrar: jkridner.wordpress.com


Tags: cape;bbblack;bbone;
Projected created on: Fri Aug 22 2014 14:47:34 GMT-0000 (UTC)
Submitted by: jkridner.wordpress.com
Last updated on: Fri Aug 22 2014 14:47:34 GMT-0000 (UTC)

8469
8470